You are viewing a plain text version of this content. The canonical link for it is here.
Posted to cactus-dev@jakarta.apache.org by vm...@apache.org on 2004/05/23 16:12:34 UTC
cvs commit: jakarta-cactus build.properties.default
vmassol 2004/05/23 07:12:34
Modified: . build.properties.default
Log:
Binary --> Ascii
Revision Changes Path
1.2 +251 -251 jakarta-cactus/build.properties.default
Index: build.properties.default
===================================================================
RCS file: /home/cvs/jakarta-cactus/build.properties.default,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- build.properties.default 23 May 2004 14:10:07 -0000 1.1
+++ build.properties.default 23 May 2004 14:12:34 -0000 1.2
@@ -1,251 +1,251 @@
-# ========================================================================
-#
-# Copyright 2001-2004 The Apache Software Foundation.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# ========================================================================
-
-# -----------------------------------------------------------------------------
-# build.properties.default
-#
-# This file contains the default values to configure the Cactus build system.
-# You are expected to create a copy of this file named build.properties in
-# which you'll provide your customization for your local environment (such as
-# defining which container to use for running the Cactus tests, etc).
-#
-# $Id$
-# -----------------------------------------------------------------------------
-
-# Note 1: The relative paths below are relative to the directory where the
-# build.xml file is located.
-
-# Note 2: The libraries defined below can be automatically downloaded by
-# typing "ant -f download.xml".
-
-# -----------------------------------------------------------------------------
-# Mandatory properties shared by several subprojects
-# -----------------------------------------------------------------------------
-
-# Location of the jar repository. This is where the jars are expected to be
-# found. The default format is that of a Maven repository format. However you
-# can use any location and any format you wish, by tuning the default jar
-# locations at the bottom of this file.
-lib.repo = ${user.home}/.maven/repository
-
-# The location of the J2EE API jars. Depending on their versions the corresponding
-# Cactus Framework will be built. For example if you use the J2EE 1.3 jars, then
-# the Cactus jar will contain the Filter Redirector which is only available for
-# Servlet 2.3+ (part of J2EE 1.3+).
-#
-# Valid values are:
-# - J2EE 1.2: j2ee.12.jar, servlet.22.jar, jsp.11.jar
-# - J2EE 1.3: j2ee.13.jar, servlet.23.jar, jsp.12.jar
-# - J2EE 1.4: j2ee.14.jar, servlet.24.jar, jsp.20.jar
-#
-# Note: If you're using J2EE 1.2, you won't be able to automatically download
-# the jar file as it's only available through the Sun website and is not
-# redistributable. You can download it manually here:
-# http://java.sun.com/j2ee/sdk_1.2.1/
-
-# The J2EE API version to use
-j2ee.jar = ${j2ee.13.jar}
-
-# The Servlet API version to use
-servlet.jar = ${servlet.23.jar}
-
-# The Servlet API version to use
-jsp.jar = ${jsp.12.jar}
-
-# -----------------------------------------------------------------------------
-# Mandatory properties for the Eclipse plugin only
-# -----------------------------------------------------------------------------
-
-# Do we build the Eclipse project as part of the master build? Uncomment
-# to build Eclipse projects.
-#eclipse.build = true
-
-# Location of Eclipse.
-#eclipse.home = D:/dev/eclipse-2.1
-
-# Locations of Eclipse dependent plugin jars
-
-# Example for Eclipse 2.1.2 - Windows platform
-#eclipse.ant.core.jar = ${eclipse.home}/plugins/org.eclipse.ant.core_2.1.1/antsupport.jar
-#eclipse.core.boot.jar = ${eclipse.home}/plugins/org.eclipse.core.boot_2.1.2/boot.jar
-#eclipse.core.resources.jar = ${eclipse.home}/plugins/org.eclipse.core.resources_2.1.1/resources.jar
-#eclipse.core.runtime.jar = ${eclipse.home}/plugins/org.eclipse.core.runtime_2.1.1/runtime.jar
-#eclipse.debug.core.jar = ${eclipse.home}/plugins/org.eclipse.debug.core_2.1.2/dtcore.jar
-#eclipse.debug.ui.jar = ${eclipse.home}/plugins/org.eclipse.debug.ui_2.1.1/dtui.jar
-#eclipse.jdt.core.jar = ${eclipse.home}/plugins/org.eclipse.jdt.core_2.1.2/jdtcore.jar
-#eclipse.jdt.junit.jar = ${eclipse.home}/plugins/org.eclipse.jdt.junit_2.1.1/junitsupport.jar
-#eclipse.jdt.launching.jar = ${eclipse.home}/plugins/org.eclipse.jdt.launching_2.1.1/launching.jar
-#eclipse.jdt.ui.jar = ${eclipse.home}/plugins/org.eclipse.jdt.ui_2.1.2/jdt.jar
-#eclipse.jface.jar = ${eclipse.home}/plugins/org.eclipse.jface_2.1.1/jface.jar
-#eclipse.swt.jar = ${eclipse.home}/plugins/org.eclipse.swt.win32_2.1.2/ws/win32/swt.jar
-#eclipse.ui.externaltools.jar = ${eclipse.home}/plugins/org.eclipse.ui.externaltools_2.1.1/externaltools.jar
-#eclipse.ui.workbench.jar = ${eclipse.home}/plugins/org.eclipse.ui.workbench_2.1.1/workbench.jar
-
-# -----------------------------------------------------------------------------
-# Optional properties share by several subprojects
-# -----------------------------------------------------------------------------
-
-# Should we instrument our code with Clover (test coverage tool)?
-# For this to work, the clover.jar needs to be in ANTHOME/lib.
-# Comment out to disable Clover (setting the property to false will have no
-# effect).
-#clover.enable = true
-
-# -----------------------------------------------------------------------------
-# Optional properties for the Servlet Sample subproject
-# -----------------------------------------------------------------------------
-
-# The port to use for starting the servers during unit testing. If not
-# specified, it defaults to port 8080.
-#cactus.port = 8081
-
-# Servlet engine locations for the tests
-
-# Note: If you don't want to run the test on a given servlet engine, just
-# comment it's home property. For example, if you don't want to run the
-# tests on Resin 2.x, comment the "cactus.home.resin2x" property.
-
-#cactus.home.resin2x = c:/Apps/resin-2.1.13
-#cactus.home.resin3x = c:/Apps/resin-3.0.7
-#cactus.home.tomcat3x = c:/Apps/jakarta-tomcat-3.3.2
-#cactus.home.tomcat4x = c:/Apps/jakarta-tomcat-4.1.30
-#cactus.home.tomcat5x = c:/Apps/jakarta-tomcat-5.0.19
-#cactus.home.orion1x = c:/Apps/orion-1.6.0
-#cactus.home.orion2x = c:/Apps/orion-2.0.3
-#cactus.home.jboss3x = c:/Apps/jboss-3.2.3
-#cactus.home.weblogic7x = c:/bea/weblogic700
-
-# -----------------------------------------------------------------------------
-# Optional properties for the Servlet Documentation subproject
-# -----------------------------------------------------------------------------
-
-# Decide whether or not to include the javadoc from the other subprojects in
-# the web site. This is an option useful for reducing web site build time as
-# javadoc do not need to be always updated. Uncomment to activate inclusion
-# of javadoc.
-#javadoc.include = true
-
-# Properties needed to upload the documentation to the Cactus web site
-#jakarta.username = vmassol
-#scp = pscp
-#ssh = tortoisePlink
-
-# -----------------------------------------------------------------------------
-# Optional properties for downloading the jar libraries
-# -----------------------------------------------------------------------------
-
-# If you're behind a firewall set the following properties
-proxyhost =
-proxyuser =
-proxypassword =
-proxyport = 80
-
-# -----------------------------------------------------------------------------
-# Properties that could be changed but you shouldn't bother touching. They
-# define the location of the jar libraries used by the build scripts. These
-# properties are also used by the download.xml Ant script to download the
-# corresponding jars and to put them in the locations defined below.
-# -----------------------------------------------------------------------------
-
-# List all available J2EE API versions. Note that it is required to list all
-# versions if you wish to call "ant release" in jakarta-cactus. If you only
-# wish to build a single Cactus project you only need to list the version you
-# wish to use.
-# Note: If you're using J2EE 1.2, you won't be able to automatically download
-# the jar file as it's only available through the Sun website and is not
-# redistributable. You'll need to manually download it (from
-# http://java.sun.com/j2ee/sdk_1.2.1/) and put in ${j2ee.12.jar}.
-j2ee.12.jar = ${lib.repo}/j2ee/jars/j2ee-1.2.jar
-j2ee.13.jar = ${lib.repo}/${j2ee.13.project}/jars/${j2ee.13.artifact}-${j2ee.13.version}.jar
-j2ee.14.jar = ${lib.repo}/${j2ee.14.project}/jars/${j2ee.14.artifact}-${j2ee.14.version}.jar
-
-# List all available Servlet versions. Note that it is required to list all
-# versions if you wish to call "ant release" in jakarta-cactus. If you only
-# wish to build a single Cactus project you only need to list the version you
-# wish to use.
-servlet.22.jar = ${lib.repo}/${servlet.22.project}/jars/${servlet.22.artifact}-${servlet.22.version}.jar
-servlet.23.jar = ${lib.repo}/${servlet.23.project}/jars/${servlet.23.artifact}-${servlet.23.version}.jar
-servlet.24.jar = ${lib.repo}/${servlet.24.project}/jars/${servlet.24.artifact}-${servlet.24.version}.jar
-
-# List all available JSP versions. Note that it is required to list all
-# versions if you wish to call "ant release" in jakarta-cactus. If you only
-# wish to build a single Cactus project you only need to list the version you
-# wish to use.
-jsp.11.jar = ${servlet.22.jar}
-jsp.12.jar = ${servlet.23.jar}
-jsp.20.jar = ${lib.repo}/${jsp.20.project}/jars/${jsp.20.artifact}-${jsp.20.version}.jar
-
-# The location of the Commons Logging jar
-commons.logging.jar = ${lib.repo}/${commons.logging.project}/jars/${commons.logging.artifact}-${commons.logging.version}.jar
-
-# The location of the log4j jar
-log4j.jar = ${lib.repo}/${log4j.project}/jars/${log4j.artifact}-${log4j.version}.jar
-
-# The location of the Commons Httpclient jar
-commons.httpclient.jar = ${lib.repo}/${commons.httpclient.project}/jars/${commons.httpclient.artifact}-${commons.httpclient.version}.jar
-
-# The location of the AspectJ runtime jar
-aspectjrt.jar = ${lib.repo}/${aspectjrt.project}/jars/${aspectjrt.artifact}-${aspectjrt.version}.jar
-
-# The location of the Junit jar
-junit.jar = ${ant.home}/lib/${junit.artifact}-${junit.version}.jar
-
-# The location of the MockObjects jar (needed for our unit tests)
-mockobjects.jar = ${lib.repo}/${mockobjects.project}/jars/${mockobjects.artifact}-${mockobjects.version}.jar
-
-# The location of the JSTL jar
-jstl.jar = ${lib.repo}/${jstl.project}/jars/${jstl.artifact}-${jstl.version}.jar
-
-# The location of the JSTL jar
-standard.jar = ${lib.repo}/${standard.project}/jars/${standard.artifact}-${standard.version}.jar
-
-# The location of the Httpunit jar
-httpunit.jar = ${lib.repo}/${httpunit.project}/jars/${httpunit.artifact}-${httpunit.version}.jar
-
-# Neko HTML (required by HttpUnit)
-nekohtml.jar = ${lib.repo}/${nekohtml.project}/jars/${nekohtml.artifact}-${nekohtml.version}.jar
-
-# Xerces (required by HttpUnit)
-xerces.jar = ${lib.repo}/${xerces.project}/jars/${xerces.artifact}-${xerces.version}.jar
-
-# XML Parsers API (required by HttpUnit)
-xmlapis.jar = ${lib.repo}/${xmlapis.project}/jars/${xmlapis.artifact}-${xmlapis.version}.jar
-
-# The location of the Jetty jar
-jetty.jar = ${lib.repo}/${jetty.project}/jars/${jetty.artifact}-${jetty.version}.jar
-
-# The location of the Jasper compiler jar (provided with Tomcat). Required for
-# the Jetty sample.
-jasper-compiler.jar = ${lib.repo}/${jasper-compiler.project}/jars/${jasper-compiler.artifact}-${jasper-compiler.version}.jar
-
-# The location of the Jasper runtime jar (provided with Tomcat). Required for
-# the Jetty sample.
-jasper-runtime.jar = ${lib.repo}/${jasper-runtime.project}/jars/${jasper-runtime.artifact}-${jasper-runtime.version}.jar
-
-# The location of the AspectJ tools jar.
-aspectj-tools.jar = ${lib.repo}/${aspectj-tools.project}/jars/${aspectj-tools.artifact}-${aspectj-tools.version}.jar
-
-# Dependencies for Checkstyle code auditing.
-antlr.jar = ${lib.repo}/${antlr.project}/jars/${antlr.artifact}-${antlr.version}.jar
-checkstyle.jar = ${lib.repo}/${checkstyle.project}/jars/${checkstyle.artifact}-${checkstyle.version}.jar
-commons.beanutils.jar = ${lib.repo}/${commons.beanutils.project}/jars/${commons.beanutils.artifact}-${commons.beanutils.version}.jar
-commons.collections.jar = ${lib.repo}/${commons.collections.project}/jars/${commons.collections.artifact}-${commons.collections.version}.jar
-regexp.jar = ${lib.repo}/${regexp.project}/jars/${regexp.artifact}-${regexp.version}.jar
-
-# Clover jar. This is required if clover is enabled (i.e. clover.enable is defined)
-clover.jar = ${ant.home}/lib/${clover.artifact}-${clover.version}.jar
+# ========================================================================
+#
+# Copyright 2001-2004 The Apache Software Foundation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# ========================================================================
+
+# -----------------------------------------------------------------------------
+# build.properties.default
+#
+# This file contains the default values to configure the Cactus build system.
+# You are expected to create a copy of this file named build.properties in
+# which you'll provide your customization for your local environment (such as
+# defining which container to use for running the Cactus tests, etc).
+#
+# $Id$
+# -----------------------------------------------------------------------------
+
+# Note 1: The relative paths below are relative to the directory where the
+# build.xml file is located.
+
+# Note 2: The libraries defined below can be automatically downloaded by
+# typing "ant -f download.xml".
+
+# -----------------------------------------------------------------------------
+# Mandatory properties shared by several subprojects
+# -----------------------------------------------------------------------------
+
+# Location of the jar repository. This is where the jars are expected to be
+# found. The default format is that of a Maven repository format. However you
+# can use any location and any format you wish, by tuning the default jar
+# locations at the bottom of this file.
+lib.repo = ${user.home}/.maven/repository
+
+# The location of the J2EE API jars. Depending on their versions the corresponding
+# Cactus Framework will be built. For example if you use the J2EE 1.3 jars, then
+# the Cactus jar will contain the Filter Redirector which is only available for
+# Servlet 2.3+ (part of J2EE 1.3+).
+#
+# Valid values are:
+# - J2EE 1.2: j2ee.12.jar, servlet.22.jar, jsp.11.jar
+# - J2EE 1.3: j2ee.13.jar, servlet.23.jar, jsp.12.jar
+# - J2EE 1.4: j2ee.14.jar, servlet.24.jar, jsp.20.jar
+#
+# Note: If you're using J2EE 1.2, you won't be able to automatically download
+# the jar file as it's only available through the Sun website and is not
+# redistributable. You can download it manually here:
+# http://java.sun.com/j2ee/sdk_1.2.1/
+
+# The J2EE API version to use
+j2ee.jar = ${j2ee.13.jar}
+
+# The Servlet API version to use
+servlet.jar = ${servlet.23.jar}
+
+# The Servlet API version to use
+jsp.jar = ${jsp.12.jar}
+
+# -----------------------------------------------------------------------------
+# Mandatory properties for the Eclipse plugin only
+# -----------------------------------------------------------------------------
+
+# Do we build the Eclipse project as part of the master build? Uncomment
+# to build Eclipse projects.
+#eclipse.build = true
+
+# Location of Eclipse.
+#eclipse.home = D:/dev/eclipse-2.1
+
+# Locations of Eclipse dependent plugin jars
+
+# Example for Eclipse 2.1.2 - Windows platform
+#eclipse.ant.core.jar = ${eclipse.home}/plugins/org.eclipse.ant.core_2.1.1/antsupport.jar
+#eclipse.core.boot.jar = ${eclipse.home}/plugins/org.eclipse.core.boot_2.1.2/boot.jar
+#eclipse.core.resources.jar = ${eclipse.home}/plugins/org.eclipse.core.resources_2.1.1/resources.jar
+#eclipse.core.runtime.jar = ${eclipse.home}/plugins/org.eclipse.core.runtime_2.1.1/runtime.jar
+#eclipse.debug.core.jar = ${eclipse.home}/plugins/org.eclipse.debug.core_2.1.2/dtcore.jar
+#eclipse.debug.ui.jar = ${eclipse.home}/plugins/org.eclipse.debug.ui_2.1.1/dtui.jar
+#eclipse.jdt.core.jar = ${eclipse.home}/plugins/org.eclipse.jdt.core_2.1.2/jdtcore.jar
+#eclipse.jdt.junit.jar = ${eclipse.home}/plugins/org.eclipse.jdt.junit_2.1.1/junitsupport.jar
+#eclipse.jdt.launching.jar = ${eclipse.home}/plugins/org.eclipse.jdt.launching_2.1.1/launching.jar
+#eclipse.jdt.ui.jar = ${eclipse.home}/plugins/org.eclipse.jdt.ui_2.1.2/jdt.jar
+#eclipse.jface.jar = ${eclipse.home}/plugins/org.eclipse.jface_2.1.1/jface.jar
+#eclipse.swt.jar = ${eclipse.home}/plugins/org.eclipse.swt.win32_2.1.2/ws/win32/swt.jar
+#eclipse.ui.externaltools.jar = ${eclipse.home}/plugins/org.eclipse.ui.externaltools_2.1.1/externaltools.jar
+#eclipse.ui.workbench.jar = ${eclipse.home}/plugins/org.eclipse.ui.workbench_2.1.1/workbench.jar
+
+# -----------------------------------------------------------------------------
+# Optional properties share by several subprojects
+# -----------------------------------------------------------------------------
+
+# Should we instrument our code with Clover (test coverage tool)?
+# For this to work, the clover.jar needs to be in ANTHOME/lib.
+# Comment out to disable Clover (setting the property to false will have no
+# effect).
+#clover.enable = true
+
+# -----------------------------------------------------------------------------
+# Optional properties for the Servlet Sample subproject
+# -----------------------------------------------------------------------------
+
+# The port to use for starting the servers during unit testing. If not
+# specified, it defaults to port 8080.
+#cactus.port = 8081
+
+# Servlet engine locations for the tests
+
+# Note: If you don't want to run the test on a given servlet engine, just
+# comment it's home property. For example, if you don't want to run the
+# tests on Resin 2.x, comment the "cactus.home.resin2x" property.
+
+#cactus.home.resin2x = c:/Apps/resin-2.1.13
+#cactus.home.resin3x = c:/Apps/resin-3.0.7
+#cactus.home.tomcat3x = c:/Apps/jakarta-tomcat-3.3.2
+#cactus.home.tomcat4x = c:/Apps/jakarta-tomcat-4.1.30
+#cactus.home.tomcat5x = c:/Apps/jakarta-tomcat-5.0.19
+#cactus.home.orion1x = c:/Apps/orion-1.6.0
+#cactus.home.orion2x = c:/Apps/orion-2.0.3
+#cactus.home.jboss3x = c:/Apps/jboss-3.2.3
+#cactus.home.weblogic7x = c:/bea/weblogic700
+
+# -----------------------------------------------------------------------------
+# Optional properties for the Servlet Documentation subproject
+# -----------------------------------------------------------------------------
+
+# Decide whether or not to include the javadoc from the other subprojects in
+# the web site. This is an option useful for reducing web site build time as
+# javadoc do not need to be always updated. Uncomment to activate inclusion
+# of javadoc.
+#javadoc.include = true
+
+# Properties needed to upload the documentation to the Cactus web site
+#jakarta.username = vmassol
+#scp = pscp
+#ssh = tortoisePlink
+
+# -----------------------------------------------------------------------------
+# Optional properties for downloading the jar libraries
+# -----------------------------------------------------------------------------
+
+# If you're behind a firewall set the following properties
+proxyhost =
+proxyuser =
+proxypassword =
+proxyport = 80
+
+# -----------------------------------------------------------------------------
+# Properties that could be changed but you shouldn't bother touching. They
+# define the location of the jar libraries used by the build scripts. These
+# properties are also used by the download.xml Ant script to download the
+# corresponding jars and to put them in the locations defined below.
+# -----------------------------------------------------------------------------
+
+# List all available J2EE API versions. Note that it is required to list all
+# versions if you wish to call "ant release" in jakarta-cactus. If you only
+# wish to build a single Cactus project you only need to list the version you
+# wish to use.
+# Note: If you're using J2EE 1.2, you won't be able to automatically download
+# the jar file as it's only available through the Sun website and is not
+# redistributable. You'll need to manually download it (from
+# http://java.sun.com/j2ee/sdk_1.2.1/) and put in ${j2ee.12.jar}.
+j2ee.12.jar = ${lib.repo}/j2ee/jars/j2ee-1.2.jar
+j2ee.13.jar = ${lib.repo}/${j2ee.13.project}/jars/${j2ee.13.artifact}-${j2ee.13.version}.jar
+j2ee.14.jar = ${lib.repo}/${j2ee.14.project}/jars/${j2ee.14.artifact}-${j2ee.14.version}.jar
+
+# List all available Servlet versions. Note that it is required to list all
+# versions if you wish to call "ant release" in jakarta-cactus. If you only
+# wish to build a single Cactus project you only need to list the version you
+# wish to use.
+servlet.22.jar = ${lib.repo}/${servlet.22.project}/jars/${servlet.22.artifact}-${servlet.22.version}.jar
+servlet.23.jar = ${lib.repo}/${servlet.23.project}/jars/${servlet.23.artifact}-${servlet.23.version}.jar
+servlet.24.jar = ${lib.repo}/${servlet.24.project}/jars/${servlet.24.artifact}-${servlet.24.version}.jar
+
+# List all available JSP versions. Note that it is required to list all
+# versions if you wish to call "ant release" in jakarta-cactus. If you only
+# wish to build a single Cactus project you only need to list the version you
+# wish to use.
+jsp.11.jar = ${servlet.22.jar}
+jsp.12.jar = ${servlet.23.jar}
+jsp.20.jar = ${lib.repo}/${jsp.20.project}/jars/${jsp.20.artifact}-${jsp.20.version}.jar
+
+# The location of the Commons Logging jar
+commons.logging.jar = ${lib.repo}/${commons.logging.project}/jars/${commons.logging.artifact}-${commons.logging.version}.jar
+
+# The location of the log4j jar
+log4j.jar = ${lib.repo}/${log4j.project}/jars/${log4j.artifact}-${log4j.version}.jar
+
+# The location of the Commons Httpclient jar
+commons.httpclient.jar = ${lib.repo}/${commons.httpclient.project}/jars/${commons.httpclient.artifact}-${commons.httpclient.version}.jar
+
+# The location of the AspectJ runtime jar
+aspectjrt.jar = ${lib.repo}/${aspectjrt.project}/jars/${aspectjrt.artifact}-${aspectjrt.version}.jar
+
+# The location of the Junit jar
+junit.jar = ${ant.home}/lib/${junit.artifact}-${junit.version}.jar
+
+# The location of the MockObjects jar (needed for our unit tests)
+mockobjects.jar = ${lib.repo}/${mockobjects.project}/jars/${mockobjects.artifact}-${mockobjects.version}.jar
+
+# The location of the JSTL jar
+jstl.jar = ${lib.repo}/${jstl.project}/jars/${jstl.artifact}-${jstl.version}.jar
+
+# The location of the JSTL jar
+standard.jar = ${lib.repo}/${standard.project}/jars/${standard.artifact}-${standard.version}.jar
+
+# The location of the Httpunit jar
+httpunit.jar = ${lib.repo}/${httpunit.project}/jars/${httpunit.artifact}-${httpunit.version}.jar
+
+# Neko HTML (required by HttpUnit)
+nekohtml.jar = ${lib.repo}/${nekohtml.project}/jars/${nekohtml.artifact}-${nekohtml.version}.jar
+
+# Xerces (required by HttpUnit)
+xerces.jar = ${lib.repo}/${xerces.project}/jars/${xerces.artifact}-${xerces.version}.jar
+
+# XML Parsers API (required by HttpUnit)
+xmlapis.jar = ${lib.repo}/${xmlapis.project}/jars/${xmlapis.artifact}-${xmlapis.version}.jar
+
+# The location of the Jetty jar
+jetty.jar = ${lib.repo}/${jetty.project}/jars/${jetty.artifact}-${jetty.version}.jar
+
+# The location of the Jasper compiler jar (provided with Tomcat). Required for
+# the Jetty sample.
+jasper-compiler.jar = ${lib.repo}/${jasper-compiler.project}/jars/${jasper-compiler.artifact}-${jasper-compiler.version}.jar
+
+# The location of the Jasper runtime jar (provided with Tomcat). Required for
+# the Jetty sample.
+jasper-runtime.jar = ${lib.repo}/${jasper-runtime.project}/jars/${jasper-runtime.artifact}-${jasper-runtime.version}.jar
+
+# The location of the AspectJ tools jar.
+aspectj-tools.jar = ${lib.repo}/${aspectj-tools.project}/jars/${aspectj-tools.artifact}-${aspectj-tools.version}.jar
+
+# Dependencies for Checkstyle code auditing.
+antlr.jar = ${lib.repo}/${antlr.project}/jars/${antlr.artifact}-${antlr.version}.jar
+checkstyle.jar = ${lib.repo}/${checkstyle.project}/jars/${checkstyle.artifact}-${checkstyle.version}.jar
+commons.beanutils.jar = ${lib.repo}/${commons.beanutils.project}/jars/${commons.beanutils.artifact}-${commons.beanutils.version}.jar
+commons.collections.jar = ${lib.repo}/${commons.collections.project}/jars/${commons.collections.artifact}-${commons.collections.version}.jar
+regexp.jar = ${lib.repo}/${regexp.project}/jars/${regexp.artifact}-${regexp.version}.jar
+
+# Clover jar. This is required if clover is enabled (i.e. clover.enable is defined)
+clover.jar = ${ant.home}/lib/${clover.artifact}-${clover.version}.jar
---------------------------------------------------------------------
To unsubscribe, e-mail: cactus-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: cactus-dev-help@jakarta.apache.org