You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@tapestry.apache.org by David Moskowitz <da...@sunjug.org> on 2008/05/18 17:01:30 UTC
Help with Tapestry 3.4 and Stale Link Error
Hello Users,
I just cannot figure this one out. It seems like this error just started out of nowhere. Of course this is probably not the case, but no changes I made seem to contribute to this error. anyway.
I can get the following stale link error simply by clicking the form's search button a few times, without even modifying any search parameters.
______________________________________
You have clicked on a stale link.
Rewind of form SharedSummary/$SharedSummaryComponent.$Form expected allocated id #50 to be '$If$28', but was 'vdatepicker$1' (requested by component SharedSummary/$SharedSummaryComponent.objectList.docsRecdDate.vdatepicker).
This is most likely the result of using your browser's back button, but can also be an application error.
You may continue by returning to the application's home page.
____________________________________
I have a simple search form with text field and select list parameters on top of the page, and a list of results on the bottom. I have a search and reset imagesubmit on the top of the page.
Click search a few times gives the error.
I am doing the data retrieval in the formSubmit(IRequestCycle cycle) method.
When I hit the error, it doesn't even get to this spot.
The trace shows that the pageBeginRender is fired once, then the error occurs, before any search is done.
This makes no sense to me. I realize this is an old problem and I am using an old version, but any advice is GREATLY appreciated.
--
Best regards,
David mailto:dave@sunjug.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re[2]: Help with Tapestry 3.4 and Stale Link Error
Posted by David Moskowitz <da...@sunjug.org>.
Hello Robert,
Thanks for your advice on these components.
They are proving helpful.
--
Best regards,
David mailto:dave@sunjug.org
__________________________________
Tuesday, May 20, 2008, 10:18:46 AM, you wrote:
> For T3, I avoid using the built-in conditional and foreach components,
> and instead use the If, Else, and For components in the "Base" library
> at:
> http://www.t-deli.com/#base
> The T4 components are based on these.
> They should basically ensure that you don't see the stale-link.
> Robert
> On May 20, 2008, at 5/209:13 AM , Kevin Menard wrote:
>> Are you modifying the form based on the search results? If so, make
>> sure you use ListEdit rather than Foreach. Unfortunately, I've been
>> out of the T3 game a long time, but that seems like the most likely
>> culprit to me.
>>
>> --
>> Kevin
>>
>> On May 18, 2008, at 11:01 AM, David Moskowitz wrote:
>>
>>> Hello Users,
>>>
>>> I just cannot figure this one out. It seems like this error just
>>> started out of nowhere. Of course this is probably not the case,
>>> but no changes I made seem to contribute to this error. anyway.
>>>
>>>
>>> I can get the following stale link error simply by clicking the
>>> form's search button a few times, without even modifying any search
>>> parameters.
>>>
>>> ______________________________________
>>> You have clicked on a stale link.
>>> Rewind of form SharedSummary/$SharedSummaryComponent.$Form expected
>>> allocated id #50 to be '$If$28', but was 'vdatepicker$1' (requested
>>> by component SharedSummary/
>>> $SharedSummaryComponent.objectList.docsRecdDate.vdatepicker).
>>> This is most likely the result of using your browser's back button,
>>> but can also be an application error.
>>> You may continue by returning to the application's home page.
>>> ____________________________________
>>>
>>>
>>> I have a simple search form with text field and select list
>>> parameters on top of the page, and a list of results on the bottom.
>>> I have a search and reset imagesubmit on the top of the page.
>>>
>>> Click search a few times gives the error.
>>>
>>>
>>> I am doing the data retrieval in the formSubmit(IRequestCycle
>>> cycle) method.
>>>
>>>
>>> When I hit the error, it doesn't even get to this spot.
>>> The trace shows that the pageBeginRender is fired once, then the
>>> error occurs, before any search is done.
>>>
>>>
>>> This makes no sense to me. I realize this is an old problem and I
>>> am using an old version, but any advice is GREATLY appreciated.
>>>
>>>
>>>
>>> --
>>> Best regards,
>>> David mailto:dave@sunjug.org
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>>> For additional commands, e-mail: users-help@tapestry.apache.org
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> For additional commands, e-mail: users-help@tapestry.apache.org
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: Help with Tapestry 3.4 and Stale Link Error
Posted by Robert Zeigler <ro...@scazdl.org>.
For T3, I avoid using the built-in conditional and foreach components,
and instead use the If, Else, and For components in the "Base" library
at:
http://www.t-deli.com/#base
The T4 components are based on these.
They should basically ensure that you don't see the stale-link.
Robert
On May 20, 2008, at 5/209:13 AM , Kevin Menard wrote:
> Are you modifying the form based on the search results? If so, make
> sure you use ListEdit rather than Foreach. Unfortunately, I've been
> out of the T3 game a long time, but that seems like the most likely
> culprit to me.
>
> --
> Kevin
>
> On May 18, 2008, at 11:01 AM, David Moskowitz wrote:
>
>> Hello Users,
>>
>> I just cannot figure this one out. It seems like this error just
>> started out of nowhere. Of course this is probably not the case,
>> but no changes I made seem to contribute to this error. anyway.
>>
>>
>> I can get the following stale link error simply by clicking the
>> form's search button a few times, without even modifying any search
>> parameters.
>>
>> ______________________________________
>> You have clicked on a stale link.
>> Rewind of form SharedSummary/$SharedSummaryComponent.$Form expected
>> allocated id #50 to be '$If$28', but was 'vdatepicker$1' (requested
>> by component SharedSummary/
>> $SharedSummaryComponent.objectList.docsRecdDate.vdatepicker).
>> This is most likely the result of using your browser's back button,
>> but can also be an application error.
>> You may continue by returning to the application's home page.
>> ____________________________________
>>
>>
>> I have a simple search form with text field and select list
>> parameters on top of the page, and a list of results on the bottom.
>> I have a search and reset imagesubmit on the top of the page.
>>
>> Click search a few times gives the error.
>>
>>
>> I am doing the data retrieval in the formSubmit(IRequestCycle
>> cycle) method.
>>
>>
>> When I hit the error, it doesn't even get to this spot.
>> The trace shows that the pageBeginRender is fired once, then the
>> error occurs, before any search is done.
>>
>>
>> This makes no sense to me. I realize this is an old problem and I
>> am using an old version, but any advice is GREATLY appreciated.
>>
>>
>>
>> --
>> Best regards,
>> David mailto:dave@sunjug.org
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> For additional commands, e-mail: users-help@tapestry.apache.org
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: Help with Tapestry 3.4 and Stale Link Error
Posted by Kevin Menard <km...@servprise.com>.
Are you modifying the form based on the search results? If so, make
sure you use ListEdit rather than Foreach. Unfortunately, I've been
out of the T3 game a long time, but that seems like the most likely
culprit to me.
--
Kevin
On May 18, 2008, at 11:01 AM, David Moskowitz wrote:
> Hello Users,
>
> I just cannot figure this one out. It seems like this error just
> started out of nowhere. Of course this is probably not the case, but
> no changes I made seem to contribute to this error. anyway.
>
>
> I can get the following stale link error simply by clicking the
> form's search button a few times, without even modifying any search
> parameters.
>
> ______________________________________
> You have clicked on a stale link.
> Rewind of form SharedSummary/$SharedSummaryComponent.$Form expected
> allocated id #50 to be '$If$28', but was 'vdatepicker$1' (requested
> by component SharedSummary/
> $SharedSummaryComponent.objectList.docsRecdDate.vdatepicker).
> This is most likely the result of using your browser's back button,
> but can also be an application error.
> You may continue by returning to the application's home page.
> ____________________________________
>
>
> I have a simple search form with text field and select list
> parameters on top of the page, and a list of results on the bottom.
> I have a search and reset imagesubmit on the top of the page.
>
> Click search a few times gives the error.
>
>
> I am doing the data retrieval in the formSubmit(IRequestCycle cycle)
> method.
>
>
> When I hit the error, it doesn't even get to this spot.
> The trace shows that the pageBeginRender is fired once, then the
> error occurs, before any search is done.
>
>
> This makes no sense to me. I realize this is an old problem and I am
> using an old version, but any advice is GREATLY appreciated.
>
>
>
> --
> Best regards,
> David mailto:dave@sunjug.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re[2]: Help with Tapestry 3.4 and Stale Link Error
Posted by David Moskowitz <da...@sunjug.org>.
Hello Filip,
so is this issue resolved, or improved upon, in Tapestry 4?
Thanks
--
Best regards,
David mailto:dave@sunjug.org
__________________________________
Tuesday, May 20, 2008, 9:54:50 AM, you wrote:
> Yeah, I'm out here and would love to help, but it's been years since I
> touched Tapestry 3 - I've forgotten just about everything by now. :(
> -Filip
> David Moskowitz skrev:
>> Anyone out there on the list?
>>
>> Sorry this is not a Tapestry 5 issue, but could you please point me to an earlier discussion on this issue, if you know of one.
>>
>>
>> This is really frustrating me.
>>
>> Thanks
>>
>>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: Help with Tapestry 3.4 and Stale Link Error
Posted by "Filip S. Adamsen" <fs...@fsadev.com>.
Yeah, I'm out here and would love to help, but it's been years since I
touched Tapestry 3 - I've forgotten just about everything by now. :(
-Filip
David Moskowitz skrev:
> Anyone out there on the list?
>
> Sorry this is not a Tapestry 5 issue, but could you please point me to an earlier discussion on this issue, if you know of one.
>
>
> This is really frustrating me.
>
> Thanks
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: Help with Tapestry 3.4 and Stale Link Error
Posted by David Moskowitz <da...@sunjug.org>.
Anyone out there on the list?
Sorry this is not a Tapestry 5 issue, but could you please point me to an earlier discussion on this issue, if you know of one.
This is really frustrating me.
Thanks
--
Best regards,
David mailto:dave@sunjug.org
__________________________________
Sunday, May 18, 2008, 11:01:30 AM, you wrote:
> Hello Users,
> I just cannot figure this one out. It seems like this error just
> started out of nowhere. Of course this is probably not the case, but
> no changes I made seem to contribute to this error. anyway.
> I can get the following stale link error simply by clicking the
> form's search button a few times, without even modifying any search parameters.
> ______________________________________
> You have clicked on a stale link.
> Rewind of form SharedSummary/$SharedSummaryComponent.$Form expected
> allocated id #50 to be '$If$28', but was 'vdatepicker$1' (requested
> by component
> SharedSummary/$SharedSummaryComponent.objectList.docsRecdDate.vdatepicker).
> This is most likely the result of using your browser's back button,
> but can also be an application error.
> You may continue by returning to the application's home page.
> ____________________________________
> I have a simple search form with text field and select list
> parameters on top of the page, and a list of results on the bottom.
> I have a search and reset imagesubmit on the top of the page.
> Click search a few times gives the error.
> I am doing the data retrieval in the formSubmit(IRequestCycle cycle) method.
> When I hit the error, it doesn't even get to this spot.
> The trace shows that the pageBeginRender is fired once, then the
> error occurs, before any search is done.
> This makes no sense to me. I realize this is an old problem and I
> am using an old version, but any advice is GREATLY appreciated.
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org