You are viewing a plain text version of this content. The canonical link for it is here.
Posted to server-user@james.apache.org by Rogier Doekes <rd...@gmail.com> on 2007/11/06 04:35:48 UTC
Add virtual hosts at runtime
Hi All,
Since I am looking for a solution to handle users in multiple domains using
James, it all seems to be coming back to the JDBCVirtualUser and the
servernames section in the config.xml file.
I've implemented the JDBC VirtualUserTable functionality (there's a very
good article on the Wiki there, kudos!)
Our requirement though, is to be able to manage domains at runtime; our
current scope is to let admin users add the domains at runtime, using some
sort of wrapper functionality.
Therefore, manually adding the domains as servernames in the config.xml file
and restarting James is for us not the preferred solution.
The latest discussion I could find on the subject of virtual hosts was 2
years ago. Are there any current plans of adding functionality to manage
domains at runtime?
Cheers,
Rogier Doekes
Re: Add virtual hosts at runtime
Posted by Norman Maurer <no...@apache.org>.
Hi,
virtualHosting is supported in current trunk... No idea when it get
released.
bye
Norman
Am Montag, den 05.11.2007, 22:35 -0500 schrieb Rogier Doekes:
> m looking for a solution to handle users in multiple domains using
> James, it all seems to be coming back to the JDBCVirtualUser and the
> servernames section in the config.xml file.
>
> I've implemented the JDBC VirtualUserTable functionality (there's a
> very
> good article on the Wiki there, kudos!)
>
> Our requirement though, is to be able to manage domains at runtime;
> our
> current scope is to let admin users add the domains at runtime, using
> some
> sort of wrapper functionality.
>
> Therefore, manually adding the domains as servernames in the
> config.xml file
> and restarting James is for us not the preferred solution.
>
> The latest discussion I could find on the subject of virtual hosts was
> 2
> years ago. Are there any current plans of adding functionality to
> manage
> domains at runtime?
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: Add virtual hosts at runtime
Posted by Rogier Doekes <rd...@gmail.com>.
Thank you Danny,
I will look into that so see how I can incorporate this into our solution.
Thanks for the info,
-Rogier
On Nov 8, 2007 5:02 AM, Danny Angus <da...@apache.org> wrote:
> It is the code in the version control system which hasn't been released
> yet.
> Nothing we does comes with a warranty of any kind but the code in the
> trunk isn't even finished, it might not even compile and is quite
> probably a bit flaky too.
>
> However you are more than welcome to experiment with it, sometimes its
> possible to take just a few bits of it and use them with a stable
> version.
>
> You can browse it here: http://svn.apache.org/viewvc/james/server/
>
> you need to use subversion if you want to get out, the public URL to
> use is http://svn.apache.org/repos/asf/james/server/
>
> Some instructions can be found here:
> http://www.apache.org/dev/version-control.html
>
> d.
>
>
> On 06/11/2007, Rogier Doekes <rd...@gmail.com> wrote:
> > Hi Stefano and Norman,
> >
> > I am a little confused on what trunk code means. Could you please
> eleborate
> > a little more where I could obtain this trunk code?
> >
> > Thanks for your answer,
> >
> > -Rogier
> >
> > On Nov 6, 2007 9:07 AM, Stefano Bagnara <ap...@bago.org> wrote:
> >
> > > Rogier Doekes ha scritto:
> > > > Hi All,
> > > >
> > > > Since I am looking for a solution to handle users in multiple
> domains
> > > using
> > > > James, it all seems to be coming back to the JDBCVirtualUser and the
> > > > servernames section in the config.xml file.
> > > >
> > > > I've implemented the JDBC VirtualUserTable functionality (there's a
> very
> > > > good article on the Wiki there, kudos!)
> > > >
> > > > Our requirement though, is to be able to manage domains at runtime;
> our
> > > > current scope is to let admin users add the domains at runtime,
> using
> > > some
> > > > sort of wrapper functionality.
> > > >
> > > > Therefore, manually adding the domains as servernames in the
> config.xmlfile
> > > > and restarting James is for us not the preferred solution.
> > > >
> > > > The latest discussion I could find on the subject of virtual hosts
> was 2
> > > > years ago. Are there any current plans of adding functionality to
> manage
> > > > domains at runtime?
> > >
> > > IIRC this feature is already supported in the current trunk code.
> > > Unfortunately there is not yet a plan to release that code.
> > >
> > > Stefano
> > >
> > > > Cheers,
> > > >
> > > > Rogier Doekes
> > > >
> > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> > > For additional commands, e-mail: server-user-help@james.apache.org
> > >
> > >
> >
> >
> > --
> > Rogier Doekes
> > rdoekes@gmail.com
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
>
--
Rogier Doekes
rdoekes@gmail.com
Re: Add virtual hosts at runtime
Posted by Danny Angus <da...@apache.org>.
It is the code in the version control system which hasn't been released yet.
Nothing we does comes with a warranty of any kind but the code in the
trunk isn't even finished, it might not even compile and is quite
probably a bit flaky too.
However you are more than welcome to experiment with it, sometimes its
possible to take just a few bits of it and use them with a stable
version.
You can browse it here: http://svn.apache.org/viewvc/james/server/
you need to use subversion if you want to get out, the public URL to
use is http://svn.apache.org/repos/asf/james/server/
Some instructions can be found here:
http://www.apache.org/dev/version-control.html
d.
On 06/11/2007, Rogier Doekes <rd...@gmail.com> wrote:
> Hi Stefano and Norman,
>
> I am a little confused on what trunk code means. Could you please eleborate
> a little more where I could obtain this trunk code?
>
> Thanks for your answer,
>
> -Rogier
>
> On Nov 6, 2007 9:07 AM, Stefano Bagnara <ap...@bago.org> wrote:
>
> > Rogier Doekes ha scritto:
> > > Hi All,
> > >
> > > Since I am looking for a solution to handle users in multiple domains
> > using
> > > James, it all seems to be coming back to the JDBCVirtualUser and the
> > > servernames section in the config.xml file.
> > >
> > > I've implemented the JDBC VirtualUserTable functionality (there's a very
> > > good article on the Wiki there, kudos!)
> > >
> > > Our requirement though, is to be able to manage domains at runtime; our
> > > current scope is to let admin users add the domains at runtime, using
> > some
> > > sort of wrapper functionality.
> > >
> > > Therefore, manually adding the domains as servernames in the config.xmlfile
> > > and restarting James is for us not the preferred solution.
> > >
> > > The latest discussion I could find on the subject of virtual hosts was 2
> > > years ago. Are there any current plans of adding functionality to manage
> > > domains at runtime?
> >
> > IIRC this feature is already supported in the current trunk code.
> > Unfortunately there is not yet a plan to release that code.
> >
> > Stefano
> >
> > > Cheers,
> > >
> > > Rogier Doekes
> > >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> > For additional commands, e-mail: server-user-help@james.apache.org
> >
> >
>
>
> --
> Rogier Doekes
> rdoekes@gmail.com
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: Add virtual hosts at runtime
Posted by Rogier Doekes <rd...@gmail.com>.
Hi Stefano and Norman,
I am a little confused on what trunk code means. Could you please eleborate
a little more where I could obtain this trunk code?
Thanks for your answer,
-Rogier
On Nov 6, 2007 9:07 AM, Stefano Bagnara <ap...@bago.org> wrote:
> Rogier Doekes ha scritto:
> > Hi All,
> >
> > Since I am looking for a solution to handle users in multiple domains
> using
> > James, it all seems to be coming back to the JDBCVirtualUser and the
> > servernames section in the config.xml file.
> >
> > I've implemented the JDBC VirtualUserTable functionality (there's a very
> > good article on the Wiki there, kudos!)
> >
> > Our requirement though, is to be able to manage domains at runtime; our
> > current scope is to let admin users add the domains at runtime, using
> some
> > sort of wrapper functionality.
> >
> > Therefore, manually adding the domains as servernames in the config.xmlfile
> > and restarting James is for us not the preferred solution.
> >
> > The latest discussion I could find on the subject of virtual hosts was 2
> > years ago. Are there any current plans of adding functionality to manage
> > domains at runtime?
>
> IIRC this feature is already supported in the current trunk code.
> Unfortunately there is not yet a plan to release that code.
>
> Stefano
>
> > Cheers,
> >
> > Rogier Doekes
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
>
--
Rogier Doekes
rdoekes@gmail.com
Re: Add virtual hosts at runtime
Posted by Stefano Bagnara <ap...@bago.org>.
Rogier Doekes ha scritto:
> Hi All,
>
> Since I am looking for a solution to handle users in multiple domains using
> James, it all seems to be coming back to the JDBCVirtualUser and the
> servernames section in the config.xml file.
>
> I've implemented the JDBC VirtualUserTable functionality (there's a very
> good article on the Wiki there, kudos!)
>
> Our requirement though, is to be able to manage domains at runtime; our
> current scope is to let admin users add the domains at runtime, using some
> sort of wrapper functionality.
>
> Therefore, manually adding the domains as servernames in the config.xml file
> and restarting James is for us not the preferred solution.
>
> The latest discussion I could find on the subject of virtual hosts was 2
> years ago. Are there any current plans of adding functionality to manage
> domains at runtime?
IIRC this feature is already supported in the current trunk code.
Unfortunately there is not yet a plan to release that code.
Stefano
> Cheers,
>
> Rogier Doekes
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org