You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@flex.apache.org by Gautam Pandey <gk...@gmail.com> on 2014/11/07 03:02:15 UTC
Why we need .rb.swc file
Hi Users,
I am uploading the mavenized FDK to repo. I tried the uploader given in
mavenize.jar but could not make it. Now I am uploading it manually by
selecting pom file and artifacts from each folder. I was able to upload
compiler without any issue but when I tried uploading from advancedgrid
under framework I got an error. This error happens because of two swc file
which have no classifier. Two files are
advancedgrids-4.13.0.20140701.rb.swc and advancedgrids-4.13.0.20140701.swc.
I have added classifier "rb" for advancedgrids-4.13.0.20140701.rb.swc and
uploaded it. I am not sure whether it is correct or not.
Please let me know if I am doing any wrong.
Thanks & Regards
Gautam Pandey
Re: Why we need .rb.swc file
Posted by Gautam Pandey <gk...@gmail.com>.
Thank you Chris,
I will try with both options and the workaround you have suggested.
Thanks & Regards
Gautam Pandey
On Sat, Nov 8, 2014 at 2:25 PM, Christofer Dutz <ch...@c-ware.de>
wrote:
> You did notice that there are two options for uploadig? The Aether
> Deployer and the Maven deployer? Or does your Nexus simply not allow any
> deployment? You could (eventually) create a temp repo in Nexus, deploy
> there and move the artifacts from there to the final destination or have an
> Admin to that for you ...
>
> Chris
>
> -----Ursprüngliche Nachricht-----
> Von: Gautam Pandey [mailto:gkptechi@gmail.com]
> Gesendet: Freitag, 7. November 2014 17:08
> An: users@flex.apache.org
> Betreff: Re: Why we need .rb.swc file
>
> Thanks Chris,
> I followed the documentation you wrote and doc is really perfect. I am
> facing the permission issue and nexus is not allowing to upload using
> mavenizer uploader. So no problem with your doc. I started uploading
> manually into nexus going to each folder. I have to figure out why I am not
> able to use uploader else it will be difficult to upload new FDK every time
> manually.
>
>
> Thanks & Regards
> Gautam Pandey
>
>
> On Fri, Nov 7, 2014 at 6:21 PM, Christofer Dutz <christofer.dutz@c-ware.de
> >
> wrote:
>
> > The Type of These artifacts are rb.swc so they are not swc with
> > classifyer rb.
> >
> > The files are actually only a dummy to stop maven from complaining as
> > it wants to download something. The actual resources are in special
> > language resource bundles, but flexmojos takes care of them for you.
> >
> > Hope that explains things a bit better.
> >
> > What problems did you have with uploading? Is there a problem in the
> > documentation I wrote?
> >
> > Chris
> >
> > Gesendet mit meinem HTC
> >
> > ----- Reply message -----
> > Von: "Gautam Pandey" <gk...@gmail.com>
> > An: "users@flex.apache.org" <us...@flex.apache.org>
> > Betreff: Why we need .rb.swc file
> > Datum: Fr., Nov. 7, 2014 03:04
> >
> > Hi Users,
> > I am uploading the mavenized FDK to repo. I tried the uploader
> > given in mavenize.jar but could not make it. Now I am uploading it
> > manually by selecting pom file and artifacts from each folder. I was
> > able to upload compiler without any issue but when I tried uploading
> > from advancedgrid under framework I got an error. This error happens
> > because of two swc file which have no classifier. Two files are
> > advancedgrids-4.13.0.20140701.rb.swc and
> advancedgrids-4.13.0.20140701.swc.
> >
> > I have added classifier "rb" for advancedgrids-4.13.0.20140701.rb.swc
> > and uploaded it. I am not sure whether it is correct or not.
> >
> > Please let me know if I am doing any wrong.
> >
> > Thanks & Regards
> > Gautam Pandey
> >
>
AW: Why we need .rb.swc file
Posted by Christofer Dutz <ch...@c-ware.de>.
You did notice that there are two options for uploadig? The Aether Deployer and the Maven deployer? Or does your Nexus simply not allow any deployment? You could (eventually) create a temp repo in Nexus, deploy there and move the artifacts from there to the final destination or have an Admin to that for you ...
Chris
-----Ursprüngliche Nachricht-----
Von: Gautam Pandey [mailto:gkptechi@gmail.com]
Gesendet: Freitag, 7. November 2014 17:08
An: users@flex.apache.org
Betreff: Re: Why we need .rb.swc file
Thanks Chris,
I followed the documentation you wrote and doc is really perfect. I am facing the permission issue and nexus is not allowing to upload using mavenizer uploader. So no problem with your doc. I started uploading manually into nexus going to each folder. I have to figure out why I am not able to use uploader else it will be difficult to upload new FDK every time manually.
Thanks & Regards
Gautam Pandey
On Fri, Nov 7, 2014 at 6:21 PM, Christofer Dutz <ch...@c-ware.de>
wrote:
> The Type of These artifacts are rb.swc so they are not swc with
> classifyer rb.
>
> The files are actually only a dummy to stop maven from complaining as
> it wants to download something. The actual resources are in special
> language resource bundles, but flexmojos takes care of them for you.
>
> Hope that explains things a bit better.
>
> What problems did you have with uploading? Is there a problem in the
> documentation I wrote?
>
> Chris
>
> Gesendet mit meinem HTC
>
> ----- Reply message -----
> Von: "Gautam Pandey" <gk...@gmail.com>
> An: "users@flex.apache.org" <us...@flex.apache.org>
> Betreff: Why we need .rb.swc file
> Datum: Fr., Nov. 7, 2014 03:04
>
> Hi Users,
> I am uploading the mavenized FDK to repo. I tried the uploader
> given in mavenize.jar but could not make it. Now I am uploading it
> manually by selecting pom file and artifacts from each folder. I was
> able to upload compiler without any issue but when I tried uploading
> from advancedgrid under framework I got an error. This error happens
> because of two swc file which have no classifier. Two files are
> advancedgrids-4.13.0.20140701.rb.swc and advancedgrids-4.13.0.20140701.swc.
>
> I have added classifier "rb" for advancedgrids-4.13.0.20140701.rb.swc
> and uploaded it. I am not sure whether it is correct or not.
>
> Please let me know if I am doing any wrong.
>
> Thanks & Regards
> Gautam Pandey
>
Re: Why we need .rb.swc file
Posted by Gautam Pandey <gk...@gmail.com>.
Thanks Chris,
I followed the documentation you wrote and doc is really perfect. I am
facing the permission issue and nexus is not allowing to upload using
mavenizer uploader. So no problem with your doc. I started uploading
manually into nexus going to each folder. I have to figure out why I am not
able to use uploader else it will be difficult to upload new FDK every time
manually.
Thanks & Regards
Gautam Pandey
On Fri, Nov 7, 2014 at 6:21 PM, Christofer Dutz <ch...@c-ware.de>
wrote:
> The Type of These artifacts are rb.swc so they are not swc with classifyer
> rb.
>
> The files are actually only a dummy to stop maven from complaining as it
> wants to download something. The actual resources are in special language
> resource bundles, but flexmojos takes care of them for you.
>
> Hope that explains things a bit better.
>
> What problems did you have with uploading? Is there a problem in the
> documentation I wrote?
>
> Chris
>
> Gesendet mit meinem HTC
>
> ----- Reply message -----
> Von: "Gautam Pandey" <gk...@gmail.com>
> An: "users@flex.apache.org" <us...@flex.apache.org>
> Betreff: Why we need .rb.swc file
> Datum: Fr., Nov. 7, 2014 03:04
>
> Hi Users,
> I am uploading the mavenized FDK to repo. I tried the uploader given in
> mavenize.jar but could not make it. Now I am uploading it manually by
> selecting pom file and artifacts from each folder. I was able to upload
> compiler without any issue but when I tried uploading from advancedgrid
> under framework I got an error. This error happens because of two swc file
> which have no classifier. Two files are
> advancedgrids-4.13.0.20140701.rb.swc and advancedgrids-4.13.0.20140701.swc.
>
> I have added classifier "rb" for advancedgrids-4.13.0.20140701.rb.swc and
> uploaded it. I am not sure whether it is correct or not.
>
> Please let me know if I am doing any wrong.
>
> Thanks & Regards
> Gautam Pandey
>
AW: Why we need .rb.swc file
Posted by Christofer Dutz <ch...@c-ware.de>.
The Type of These artifacts are rb.swc so they are not swc with classifyer rb.
The files are actually only a dummy to stop maven from complaining as it wants to download something. The actual resources are in special language resource bundles, but flexmojos takes care of them for you.
Hope that explains things a bit better.
What problems did you have with uploading? Is there a problem in the documentation I wrote?
Chris
Gesendet mit meinem HTC
----- Reply message -----
Von: "Gautam Pandey" <gk...@gmail.com>
An: "users@flex.apache.org" <us...@flex.apache.org>
Betreff: Why we need .rb.swc file
Datum: Fr., Nov. 7, 2014 03:04
Hi Users,
I am uploading the mavenized FDK to repo. I tried the uploader given in
mavenize.jar but could not make it. Now I am uploading it manually by
selecting pom file and artifacts from each folder. I was able to upload
compiler without any issue but when I tried uploading from advancedgrid
under framework I got an error. This error happens because of two swc file
which have no classifier. Two files are
advancedgrids-4.13.0.20140701.rb.swc and advancedgrids-4.13.0.20140701.swc.
I have added classifier "rb" for advancedgrids-4.13.0.20140701.rb.swc and
uploaded it. I am not sure whether it is correct or not.
Please let me know if I am doing any wrong.
Thanks & Regards
Gautam Pandey