You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Donal Lafferty <do...@citrix.com> on 2012/06/25 22:42:30 UTC
Multiple NICs on a VM
Apologies if this is a repeat question, but how would you deploy a virtual machine with multiple NICs? Is this even possible?
Re: branch repeater [Was Re: Multiple NICs on a VM]
Posted by Peter Amiri <pe...@alurium.com>.
If you are using advanced networking and working with VLANs then you could run the VPX in a XenServer host outside of the CloudStack but tie it into the same VLAN as the customers. The only issue with this is that you have to use an internal IP from the client allocation and hope that the DHCP will not try to dole that IP out to another VM in their virtual network.
--
Peter Amiri
Founder | Alurium Cloud Computing
949-338-3862 | peter@alurium.com | http://www.alurium.com
LinkedIn: http://www.linkedin.com/in/peteramiri | IM bpamiri (AIM/MSN/Y!/GTLK/SKYPE)
Follow Us: http://twitter.com/AluriumCloud
Like Us: http://facebook.com/AluriumCloud
On Jul 10, 2012, at 7:28 PM, James Kahn wrote:
> Thanks for the info Murali.
>
> We're looking at using it with Citrix NetScaler CloudBridge to extend the
> L2 fabric between on-premise and in cloud. If that proves troublesome we'd
> set up an IPsec VPN instance.
>
>
>
> -----Original Message-----
> From: Murali Reddy <Mu...@citrix.com>
> Reply-To: "cloudstack-users@incubator.apache.org"
> <cl...@incubator.apache.org>
> Date: Wednesday, 11 July 2012 8:16 AM
> To: "cloudstack-users@incubator.apache.org"
> <cl...@incubator.apache.org>
> Subject: branch repeater [Was Re: Multiple NICs on a VM]
>
>>
>> Interesting! A while back I was trying to figure out how to run a branch
>> repeater as a VM in a guest network.
>>
>> Correct me if I am wrong. In case of physical branch repeater device one
>> would set branch repeater as a pass through device so two NIC's are
>> needed. But in a virtual environment I suspect if there is way to set up
>> VPX as pass through (inline mode) device and may need to use one-arm mode.
>> Unfortunately it looks even one-arm mode requires two nic's to be
>> configured on the VPX.
>>
>> Just curious to know, since there is no site-to-site VPN capability in
>> CloudStack at this point, how do you intend to use branch repeater?
>>
>> [1].http://support.citrix.com/article/CTX131015/
>>
>>
>> On 10/07/12 2:15 PM, "James Kahn" <jk...@idea11.com.au> wrote:
>>
>>> In this case, for a Citrix Branch Repeater VPX. It's supposed to have two
>>> virtual NICs.
>>>
>>
>>
>
>
Re: branch repeater [Was Re: Multiple NICs on a VM]
Posted by James Kahn <jk...@idea11.com.au>.
Thanks for the info Murali.
We're looking at using it with Citrix NetScaler CloudBridge to extend the
L2 fabric between on-premise and in cloud. If that proves troublesome we'd
set up an IPsec VPN instance.
-----Original Message-----
From: Murali Reddy <Mu...@citrix.com>
Reply-To: "cloudstack-users@incubator.apache.org"
<cl...@incubator.apache.org>
Date: Wednesday, 11 July 2012 8:16 AM
To: "cloudstack-users@incubator.apache.org"
<cl...@incubator.apache.org>
Subject: branch repeater [Was Re: Multiple NICs on a VM]
>
>Interesting! A while back I was trying to figure out how to run a branch
>repeater as a VM in a guest network.
>
>Correct me if I am wrong. In case of physical branch repeater device one
>would set branch repeater as a pass through device so two NIC's are
>needed. But in a virtual environment I suspect if there is way to set up
>VPX as pass through (inline mode) device and may need to use one-arm mode.
> Unfortunately it looks even one-arm mode requires two nic's to be
>configured on the VPX.
>
>Just curious to know, since there is no site-to-site VPN capability in
>CloudStack at this point, how do you intend to use branch repeater?
>
>[1].http://support.citrix.com/article/CTX131015/
>
>
>On 10/07/12 2:15 PM, "James Kahn" <jk...@idea11.com.au> wrote:
>
>>In this case, for a Citrix Branch Repeater VPX. It's supposed to have two
>>virtual NICs.
>>
>
>
branch repeater [Was Re: Multiple NICs on a VM]
Posted by Murali Reddy <Mu...@citrix.com>.
Interesting! A while back I was trying to figure out how to run a branch
repeater as a VM in a guest network.
Correct me if I am wrong. In case of physical branch repeater device one
would set branch repeater as a pass through device so two NIC's are
needed. But in a virtual environment I suspect if there is way to set up
VPX as pass through (inline mode) device and may need to use one-arm mode.
Unfortunately it looks even one-arm mode requires two nic's to be
configured on the VPX.
Just curious to know, since there is no site-to-site VPN capability in
CloudStack at this point, how do you intend to use branch repeater?
[1].http://support.citrix.com/article/CTX131015/
On 10/07/12 2:15 PM, "James Kahn" <jk...@idea11.com.au> wrote:
>In this case, for a Citrix Branch Repeater VPX. It's supposed to have two
>virtual NICs.
>
Re: Multiple NICs on a VM
Posted by James Kahn <jk...@idea11.com.au>.
In this case, for a Citrix Branch Repeater VPX. It's supposed to have two
virtual NICs.
-----Original Message-----
From: Clayton Weise <cw...@iswest.net>
Reply-To: "cloudstack-users@incubator.apache.org"
<cl...@incubator.apache.org>
Date: Wednesday, 11 July 2012 2:02 AM
To: "'cloudstack-users@incubator.apache.org'"
<cl...@incubator.apache.org>
Subject: RE: Multiple NICs on a VM
>> To dig up an old thread - is it possible to create a VM with multiple
>>NICs
>> on the same virtual network?
>
>Just curious, but why would you want to create multiple NICs on the same
>network?
>
RE: Multiple NICs on a VM
Posted by Clayton Weise <cw...@iswest.net>.
> To dig up an old thread - is it possible to create a VM with multiple NICs
> on the same virtual network?
Just curious, but why would you want to create multiple NICs on the same network?
Re: Multiple NICs on a VM
Posted by Alena Prokharchyk <Al...@citrix.com>.
No, vm always has one nic per network.
On 7/9/12 5:51 PM, "James Kahn" <jk...@idea11.com.au> wrote:
>To dig up an old thread - is it possible to create a VM with multiple NICs
>on the same virtual network?
>
>Thanks,
>JK.
>
>
>
>
>-----Original Message-----
>From: Tamas Monos <ta...@veber.co.uk>
>Reply-To: "cloudstack-users@incubator.apache.org"
><cl...@incubator.apache.org>
>Date: Tuesday, 26 June 2012 7:43 PM
>To: "cloudstack-users@incubator.apache.org"
><cl...@incubator.apache.org>
>Subject: RE: Multiple NICs on a VM
>
>>Hi,
>>
>>Or just simply create multiple networks for the account via the GUI if
>>using advance networking.
>>When you deploy a VM the it will have one NIC in each network.
>>
>>Regards
>>
>>Tamas Monos DDI
>>+44(0)2034687012
>>Chief Technical Office
>>+44(0)2034687000
>>Veber: The Hosting Specialists Fax +44(0)871 522
>>7057
>>http://www.veber.co.uk
>>
>>Follow us on Twitter: www.twitter.com/veberhost
>>Follow us on Facebook: www.facebook.com/veberhost
>>
>>
>>-----Original Message-----
>>From: Alena Prokharchyk [mailto:Alena.Prokharchyk@citrix.com]
>>Sent: 26 June 2012 00:30
>>To: cloudstack-users@incubator.apache.org
>>Subject: Re: Multiple NICs on a VM
>>
>>On 6/25/12 1:42 PM, "Donal Lafferty" <do...@citrix.com> wrote:
>>
>>>Apologies if this is a repeat question, but how would you deploy a
>>>virtual machine with multiple NICs? Is this even possible?
>>>
>>
>>
>>
>>You achieve that by deploying vms in multiple networks. Just specify
>>networks as a coma separated list of networkIds in deployVm command:
>>
>>deployVirtualMachine&networkIds=204,205,210
>>
>>The first network in the list becomes the default network of the vm.
>>
>>
>>-Alena.
>>
>>
>>
>>
>
>
>
Re: Multiple NICs on a VM
Posted by James Kahn <jk...@idea11.com.au>.
To dig up an old thread - is it possible to create a VM with multiple NICs
on the same virtual network?
Thanks,
JK.
-----Original Message-----
From: Tamas Monos <ta...@veber.co.uk>
Reply-To: "cloudstack-users@incubator.apache.org"
<cl...@incubator.apache.org>
Date: Tuesday, 26 June 2012 7:43 PM
To: "cloudstack-users@incubator.apache.org"
<cl...@incubator.apache.org>
Subject: RE: Multiple NICs on a VM
>Hi,
>
>Or just simply create multiple networks for the account via the GUI if
>using advance networking.
>When you deploy a VM the it will have one NIC in each network.
>
>Regards
>
>Tamas Monos DDI
>+44(0)2034687012
>Chief Technical Office
>+44(0)2034687000
>Veber: The Hosting Specialists Fax +44(0)871 522
>7057
>http://www.veber.co.uk
>
>Follow us on Twitter: www.twitter.com/veberhost
>Follow us on Facebook: www.facebook.com/veberhost
>
>
>-----Original Message-----
>From: Alena Prokharchyk [mailto:Alena.Prokharchyk@citrix.com]
>Sent: 26 June 2012 00:30
>To: cloudstack-users@incubator.apache.org
>Subject: Re: Multiple NICs on a VM
>
>On 6/25/12 1:42 PM, "Donal Lafferty" <do...@citrix.com> wrote:
>
>>Apologies if this is a repeat question, but how would you deploy a
>>virtual machine with multiple NICs? Is this even possible?
>>
>
>
>
>You achieve that by deploying vms in multiple networks. Just specify
>networks as a coma separated list of networkIds in deployVm command:
>
>deployVirtualMachine&networkIds=204,205,210
>
>The first network in the list becomes the default network of the vm.
>
>
>-Alena.
>
>
>
>
RE: Multiple NICs on a VM
Posted by Tamas Monos <ta...@veber.co.uk>.
Hi,
Or just simply create multiple networks for the account via the GUI if using advance networking.
When you deploy a VM the it will have one NIC in each network.
Regards
Tamas Monos DDI +44(0)2034687012
Chief Technical Office +44(0)2034687000
Veber: The Hosting Specialists Fax +44(0)871 522 7057
http://www.veber.co.uk
Follow us on Twitter: www.twitter.com/veberhost
Follow us on Facebook: www.facebook.com/veberhost
-----Original Message-----
From: Alena Prokharchyk [mailto:Alena.Prokharchyk@citrix.com]
Sent: 26 June 2012 00:30
To: cloudstack-users@incubator.apache.org
Subject: Re: Multiple NICs on a VM
On 6/25/12 1:42 PM, "Donal Lafferty" <do...@citrix.com> wrote:
>Apologies if this is a repeat question, but how would you deploy a
>virtual machine with multiple NICs? Is this even possible?
>
You achieve that by deploying vms in multiple networks. Just specify networks as a coma separated list of networkIds in deployVm command:
deployVirtualMachine&networkIds=204,205,210
The first network in the list becomes the default network of the vm.
-Alena.
Re: Multiple NICs on a VM
Posted by Alena Prokharchyk <Al...@citrix.com>.
On 6/25/12 1:42 PM, "Donal Lafferty" <do...@citrix.com> wrote:
>Apologies if this is a repeat question, but how would you deploy a
>virtual machine with multiple NICs? Is this even possible?
>
You achieve that by deploying vms in multiple networks. Just specify
networks as a coma separated list of networkIds in deployVm command:
deployVirtualMachine&networkIds=204,205,210
The first network in the list becomes the default network of the vm.
-Alena.