You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@flex.apache.org by Scott Matheson <sm...@intralinks.com> on 2014/02/25 21:05:41 UTC
Slow view stake on Microsoft but not Mac or Chrombook
Hi
My end users 5 of them, are telling me that on their "old" W7 PCs, a mixture of devices they are all seeing 20sec to 120 sec to change from one screen to the next, theses are simple viewstack changes
each component in the view stack can be complex, working at the lower level changing between view stack seems to be fine
maybe this is a memory leak problem, I was thinking (maybe wrongly) that as I move form view stack ID 3 to 0 all object created in index 3 (dynamic item renders) would be cleaned by garbage collection, this may not be correct as the components all access a singleton, which is never deleted, would this stop the "old " component from being deleted so i am ending up adding the component time and time again ?
<mx:ViewStack id="masterNavigation" x="0" y="0" width="100%" height="100%" change="masterNavigation_childIndexChangeHandler(event)"
selectedIndex="{_uofsModel.activeMainMeunScreen}"> <!-- controling the size of the pages with in the overall screen -->
<ns:Login id="login"/> <!-- index 0-->
<ns3:Pips id="pips" />
<ns1:Workmenu id="workmenu" />
<ns4:GoToPage id="GoToPage" /> <!-- 3-->
<reports:StudentProgressReport id="studentReport" />
<!-- dynamic added seciotn at this ing 5 -->
<s:NavigatorContent>
<lesson:Lesson model="{_uofsModel.currentLessonModel}"/>
</s:NavigatorContent>
</mx:ViewStack>
________________________________
Disclaimer: This electronic mail and any attachments are confidential and may be privileged. If you are not the intended recipient, please notify the sender immediately by replying to this email, and destroy all copies of this email and any attachments. Thank you.
Re: Slow view stake on Microsoft but not Mac or Chrombook
Posted by Alex Harui <ah...@adobe.com>.
Switching away from a ViewStack view does not destroy it. It stays around
in memory so you can switch back quickly. Assuming you have enough
memory, once you've visited all views, memory shouldn't grow quickly and
switching should be fast. Creating stuff as you switch views is often the
cause of slow switching.
On 2/25/14 12:05 PM, "Scott Matheson" <sm...@intralinks.com> wrote:
>Hi
> My end users 5 of them, are telling me that on their "old" W7 PCs, a
>mixture of devices they are all seeing 20sec to 120 sec to change from
>one screen to the next, theses are simple viewstack changes
>
>each component in the view stack can be complex, working at the lower
>level changing between view stack seems to be fine
>
>maybe this is a memory leak problem, I was thinking (maybe wrongly) that
>as I move form view stack ID 3 to 0 all object created in index 3
>(dynamic item renders) would be cleaned by garbage collection, this may
>not be correct as the components all access a singleton, which is never
>deleted, would this stop the "old " component from being deleted so i am
>ending up adding the component time and time again ?
>
>
>
><mx:ViewStack id="masterNavigation" x="0" y="0" width="100%"
>height="100%" change="masterNavigation_childIndexChangeHandler(event)"
>
> selectedIndex="{_uofsModel.activeMainMeunScreen}"> <!-- controling
>the size of the pages with in the overall screen -->
>
><ns:Login id="login"/> <!-- index 0-->
>
><ns3:Pips id="pips" />
>
><ns1:Workmenu id="workmenu" />
>
>
>
><ns4:GoToPage id="GoToPage" /> <!-- 3-->
>
><reports:StudentProgressReport id="studentReport" />
>
><!-- dynamic added seciotn at this ing 5 -->
>
>
>
><s:NavigatorContent>
>
><lesson:Lesson model="{_uofsModel.currentLessonModel}"/>
>
></s:NavigatorContent>
>
></mx:ViewStack>
>
>
>________________________________
>
>Disclaimer: This electronic mail and any attachments are confidential and
>may be privileged. If you are not the intended recipient, please notify
>the sender immediately by replying to this email, and destroy all copies
>of this email and any attachments. Thank you.
Re: Slow view stake on Microsoft but not Mac or Chrombook
Posted by Alex Harui <ah...@adobe.com>.
Is it slow every time you change views or does it get slower? Memory
leaks generally cause slower performance over time as memory consumptions
grows.
If it happens when you first switch views then it is the cost of
allocation and initializing all the new instances. The performance
profiler might give you a better view of what is taking up all of the time.
-Alex
On 2/25/14 12:56 PM, "Scott Matheson" <sm...@intralinks.com> wrote:
>I should say i am using SDK 4.6 maybe time to move ?
>
>As I moved in and out of the view stack the memory goes up then droops
>back
>
>I can see when I change view stacks for 3 to 4 the old instance in view
>stack is GC, memory drops
>
>
>as each component in the VS is dynamic and created when i move to the VS
>ID, think of a lesson ID 3 is the page, i moved form page 1 to page 2
>etc, can you force the VS to GC when i finish with say ID3, today i see
>thew old object, wait 5 second, then true new object is created
>
>also I am seeing methordClouser memory (1971604 22.5%) Vector.<*>
>(1170776 13%) and Vector.<Number> (985760 11%)
>
>I do have a lot of skins, all using vector graphics
>
>peck memory so far is 134438K is this big ?
>
>so if this is not a memory leak, why the slowest changing view stacks
>
>
>
>
>
>________________________________________
>From: Mark Line [markline@gmail.com]
>Sent: Tuesday, February 25, 2014 8:18 PM
>To: users@flex.apache.org
>Subject: Re: Slow view stake on Microsoft but not Mac or Chrombook
>
>If you have Flash builder installed you can easily check via the profiler.
>
>Change between viewstacks and try to force garbage collection within the
>profiler. Even doing this once will show if the previous view has been
>cleared up. (You might not see the memory drop straight away as the way
>the
>GC works but the instances will be cleared). I found the best way to check
>if filter on a package of a custom component and see how many instances
>are
>left.
>
>If its leaking it should be pretty clear
>
>
>On 25 February 2014 20:05, Scott Matheson <sm...@intralinks.com>
>wrote:
>
>> Hi
>> My end users 5 of them, are telling me that on their "old" W7 PCs, a
>> mixture of devices they are all seeing 20sec to 120 sec to change from
>>one
>> screen to the next, theses are simple viewstack changes
>>
>> each component in the view stack can be complex, working at the lower
>> level changing between view stack seems to be fine
>>
>> maybe this is a memory leak problem, I was thinking (maybe wrongly) that
>> as I move form view stack ID 3 to 0 all object created in index 3
>>(dynamic
>> item renders) would be cleaned by garbage collection, this may not be
>> correct as the components all access a singleton, which is never
>>deleted,
>> would this stop the "old " component from being deleted so i am ending
>>up
>> adding the component time and time again ?
>>
>>
>>
>> <mx:ViewStack id="masterNavigation" x="0" y="0" width="100%"
>> height="100%" change="masterNavigation_childIndexChangeHandler(event)"
>>
>> selectedIndex="{_uofsModel.activeMainMeunScreen}"> <!-- controling
>>the
>> size of the pages with in the overall screen -->
>>
>> <ns:Login id="login"/> <!-- index 0-->
>>
>> <ns3:Pips id="pips" />
>>
>> <ns1:Workmenu id="workmenu" />
>>
>>
>>
>> <ns4:GoToPage id="GoToPage" /> <!-- 3-->
>>
>> <reports:StudentProgressReport id="studentReport" />
>>
>> <!-- dynamic added seciotn at this ing 5 -->
>>
>>
>>
>> <s:NavigatorContent>
>>
>> <lesson:Lesson model="{_uofsModel.currentLessonModel}"/>
>>
>> </s:NavigatorContent>
>>
>> </mx:ViewStack>
>>
>>
>> ________________________________
>>
>> Disclaimer: This electronic mail and any attachments are confidential
>>and
>> may be privileged. If you are not the intended recipient, please notify
>>the
>> sender immediately by replying to this email, and destroy all copies of
>> this email and any attachments. Thank you.
>>
>
>________________________________
>
>Disclaimer: This electronic mail and any attachments are confidential and
>may be privileged. If you are not the intended recipient, please notify
>the sender immediately by replying to this email, and destroy all copies
>of this email and any attachments. Thank you.
RE: Slow view stake on Microsoft but not Mac or Chrombook
Posted by Scott Matheson <sm...@intralinks.com>.
I should say i am using SDK 4.6 maybe time to move ?
As I moved in and out of the view stack the memory goes up then droops back
I can see when I change view stacks for 3 to 4 the old instance in view stack is GC, memory drops
as each component in the VS is dynamic and created when i move to the VS ID, think of a lesson ID 3 is the page, i moved form page 1 to page 2 etc, can you force the VS to GC when i finish with say ID3, today i see thew old object, wait 5 second, then true new object is created
also I am seeing methordClouser memory (1971604 22.5%) Vector.<*> (1170776 13%) and Vector.<Number> (985760 11%)
I do have a lot of skins, all using vector graphics
peck memory so far is 134438K is this big ?
so if this is not a memory leak, why the slowest changing view stacks
________________________________________
From: Mark Line [markline@gmail.com]
Sent: Tuesday, February 25, 2014 8:18 PM
To: users@flex.apache.org
Subject: Re: Slow view stake on Microsoft but not Mac or Chrombook
If you have Flash builder installed you can easily check via the profiler.
Change between viewstacks and try to force garbage collection within the
profiler. Even doing this once will show if the previous view has been
cleared up. (You might not see the memory drop straight away as the way the
GC works but the instances will be cleared). I found the best way to check
if filter on a package of a custom component and see how many instances are
left.
If its leaking it should be pretty clear
On 25 February 2014 20:05, Scott Matheson <sm...@intralinks.com> wrote:
> Hi
> My end users 5 of them, are telling me that on their "old" W7 PCs, a
> mixture of devices they are all seeing 20sec to 120 sec to change from one
> screen to the next, theses are simple viewstack changes
>
> each component in the view stack can be complex, working at the lower
> level changing between view stack seems to be fine
>
> maybe this is a memory leak problem, I was thinking (maybe wrongly) that
> as I move form view stack ID 3 to 0 all object created in index 3 (dynamic
> item renders) would be cleaned by garbage collection, this may not be
> correct as the components all access a singleton, which is never deleted,
> would this stop the "old " component from being deleted so i am ending up
> adding the component time and time again ?
>
>
>
> <mx:ViewStack id="masterNavigation" x="0" y="0" width="100%"
> height="100%" change="masterNavigation_childIndexChangeHandler(event)"
>
> selectedIndex="{_uofsModel.activeMainMeunScreen}"> <!-- controling the
> size of the pages with in the overall screen -->
>
> <ns:Login id="login"/> <!-- index 0-->
>
> <ns3:Pips id="pips" />
>
> <ns1:Workmenu id="workmenu" />
>
>
>
> <ns4:GoToPage id="GoToPage" /> <!-- 3-->
>
> <reports:StudentProgressReport id="studentReport" />
>
> <!-- dynamic added seciotn at this ing 5 -->
>
>
>
> <s:NavigatorContent>
>
> <lesson:Lesson model="{_uofsModel.currentLessonModel}"/>
>
> </s:NavigatorContent>
>
> </mx:ViewStack>
>
>
> ________________________________
>
> Disclaimer: This electronic mail and any attachments are confidential and
> may be privileged. If you are not the intended recipient, please notify the
> sender immediately by replying to this email, and destroy all copies of
> this email and any attachments. Thank you.
>
________________________________
Disclaimer: This electronic mail and any attachments are confidential and may be privileged. If you are not the intended recipient, please notify the sender immediately by replying to this email, and destroy all copies of this email and any attachments. Thank you.
Re: Slow view stake on Microsoft but not Mac or Chrombook
Posted by Mattchoo <ma...@mattchoo.com>.
This is likely not a memory leak.
Our app is written to preserve the views and reuse them. Hence objects residing in memory are often desired and quashing them is not necessarily the goal.
Let me know if I can offer help.
Thanks
OMeara
Sent from my iPhone
> On Feb 25, 2014, at 12:18 PM, Mark Line <ma...@gmail.com> wrote:
>
> If you have Flash builder installed you can easily check via the profiler.
>
> Change between viewstacks and try to force garbage collection within the
> profiler. Even doing this once will show if the previous view has been
> cleared up. (You might not see the memory drop straight away as the way the
> GC works but the instances will be cleared). I found the best way to check
> if filter on a package of a custom component and see how many instances are
> left.
>
> If its leaking it should be pretty clear
>
>
>> On 25 February 2014 20:05, Scott Matheson <sm...@intralinks.com> wrote:
>>
>> Hi
>> My end users 5 of them, are telling me that on their "old" W7 PCs, a
>> mixture of devices they are all seeing 20sec to 120 sec to change from one
>> screen to the next, theses are simple viewstack changes
>>
>> each component in the view stack can be complex, working at the lower
>> level changing between view stack seems to be fine
>>
>> maybe this is a memory leak problem, I was thinking (maybe wrongly) that
>> as I move form view stack ID 3 to 0 all object created in index 3 (dynamic
>> item renders) would be cleaned by garbage collection, this may not be
>> correct as the components all access a singleton, which is never deleted,
>> would this stop the "old " component from being deleted so i am ending up
>> adding the component time and time again ?
>>
>>
>>
>> <mx:ViewStack id="masterNavigation" x="0" y="0" width="100%"
>> height="100%" change="masterNavigation_childIndexChangeHandler(event)"
>>
>> selectedIndex="{_uofsModel.activeMainMeunScreen}"> <!-- controling the
>> size of the pages with in the overall screen -->
>>
>> <ns:Login id="login"/> <!-- index 0-->
>>
>> <ns3:Pips id="pips" />
>>
>> <ns1:Workmenu id="workmenu" />
>>
>>
>>
>> <ns4:GoToPage id="GoToPage" /> <!-- 3-->
>>
>> <reports:StudentProgressReport id="studentReport" />
>>
>> <!-- dynamic added seciotn at this ing 5 -->
>>
>>
>>
>> <s:NavigatorContent>
>>
>> <lesson:Lesson model="{_uofsModel.currentLessonModel}"/>
>>
>> </s:NavigatorContent>
>>
>> </mx:ViewStack>
>>
>>
>> ________________________________
>>
>> Disclaimer: This electronic mail and any attachments are confidential and
>> may be privileged. If you are not the intended recipient, please notify the
>> sender immediately by replying to this email, and destroy all copies of
>> this email and any attachments. Thank you.
>>
Re: Slow view stake on Microsoft but not Mac or Chrombook
Posted by Mark Line <ma...@gmail.com>.
If you have Flash builder installed you can easily check via the profiler.
Change between viewstacks and try to force garbage collection within the
profiler. Even doing this once will show if the previous view has been
cleared up. (You might not see the memory drop straight away as the way the
GC works but the instances will be cleared). I found the best way to check
if filter on a package of a custom component and see how many instances are
left.
If its leaking it should be pretty clear
On 25 February 2014 20:05, Scott Matheson <sm...@intralinks.com> wrote:
> Hi
> My end users 5 of them, are telling me that on their "old" W7 PCs, a
> mixture of devices they are all seeing 20sec to 120 sec to change from one
> screen to the next, theses are simple viewstack changes
>
> each component in the view stack can be complex, working at the lower
> level changing between view stack seems to be fine
>
> maybe this is a memory leak problem, I was thinking (maybe wrongly) that
> as I move form view stack ID 3 to 0 all object created in index 3 (dynamic
> item renders) would be cleaned by garbage collection, this may not be
> correct as the components all access a singleton, which is never deleted,
> would this stop the "old " component from being deleted so i am ending up
> adding the component time and time again ?
>
>
>
> <mx:ViewStack id="masterNavigation" x="0" y="0" width="100%"
> height="100%" change="masterNavigation_childIndexChangeHandler(event)"
>
> selectedIndex="{_uofsModel.activeMainMeunScreen}"> <!-- controling the
> size of the pages with in the overall screen -->
>
> <ns:Login id="login"/> <!-- index 0-->
>
> <ns3:Pips id="pips" />
>
> <ns1:Workmenu id="workmenu" />
>
>
>
> <ns4:GoToPage id="GoToPage" /> <!-- 3-->
>
> <reports:StudentProgressReport id="studentReport" />
>
> <!-- dynamic added seciotn at this ing 5 -->
>
>
>
> <s:NavigatorContent>
>
> <lesson:Lesson model="{_uofsModel.currentLessonModel}"/>
>
> </s:NavigatorContent>
>
> </mx:ViewStack>
>
>
> ________________________________
>
> Disclaimer: This electronic mail and any attachments are confidential and
> may be privileged. If you are not the intended recipient, please notify the
> sender immediately by replying to this email, and destroy all copies of
> this email and any attachments. Thank you.
>