You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@spamassassin.apache.org by Obantec Support <su...@obantec.net> on 2006/07/22 13:02:31 UTC
SA 3.1.0 spamd error
Hi
i have just built 3.1.0 using
perl Makefile.PL PREFIX=/usr/local
make
make install
trying to use the start-up script as root i get
[root@proteus2 spamd]# /etc/rc.d/init.d/spamassassin start
Starting spamd: ERROR! spamassassin script is v3.000000, but using modules
v3.001003!
SA 3.0.0 is still installed under /usr/bin
Mark
Re: SA 3.1.0 spamd error
Posted by Obantec Support <su...@obantec.net>.
----- Original Message -----
From: "Theo Van Dinter" <fe...@apache.org>
To: <us...@spamassassin.apache.org>
Sent: Saturday, July 22, 2006 5:13 PM
Subject: Re: SA 3.1.0 spamd error
thanks for the link http://wiki.apache.org/spamassassin/RuleUpdates it
helped a bit.
how often should i run sa-update? is it something i should set-up a cron job
for?
Mark
Re: SA 3.1.0 spamd error
Posted by Theo Van Dinter <fe...@apache.org>.
On Sat, Jul 22, 2006 at 02:32:52PM +0100, Obantec Support wrote:
> All seems to be running ok but sa-update put the latest .cf files in
> /var/lib/spamassassin/3.001003/updates_spamassassin_org
> not
> /etc/mail/spamassassin
Yes.
> do i need to force sa-update to use the above with sa-update --updatedir
> /etc/mail/spamassassin
Absolutely not!
> reading the online docs suggests /etc/mail/spamassassin is the default.
For your site rules, yes. Not the default rules such as those you'd get with
sa-update.
You may benefit from reading:
http://wiki.apache.org/spamassassin/RuleUpdates
> Also i see required_score replaces required_hits i guess i need to change
> all the users_prefs files or is it backwards compatible?
For now required_hits is an accepted alias for required_score.
--
Randomly Generated Tagline:
Professor: I knew I should have shown him "Electro-Gonnorhea, the Noisy Killer."
Re: SA 3.1.0 spamd error
Posted by Obantec Support <su...@obantec.net>.
----- Original Message -----
From: "jdow" <jd...@earthlink.net>
To: <us...@spamassassin.apache.org>
Sent: Saturday, July 22, 2006 2:01 PM
Subject: Re: SA 3.1.0 spamd error
> From: "Ralf Hildebrandt" <Ra...@charite.de>
>
> >* Obantec Support <su...@obantec.net>:
> >
> >> i was being over curious so if 3.1.0 failed i could drop back to 3.0.0
> >
> > That makes sense.
> >
> >> guess i need to rebuild using default /usr/bin
> >
> > No, you need to fix the startup script to call the NEW version
>
> I believe there are good odds that they will interfere with each other
> since many configuration directories are common and yet need different
> local.cf setup.
>
> {^_^}
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21/07/2006
>
>
Hi
All seems to be running ok but sa-update put the latest .cf files in
/var/lib/spamassassin/3.001003/updates_spamassassin_org
not
/etc/mail/spamassassin
do i need to force sa-update to use the above with sa-update --updatedir
/etc/mail/spamassassin
reading the online docs suggests /etc/mail/spamassassin is the default.
Also i see required_score replaces required_hits i guess i need to change
all the users_prefs files or is it backwards compatible?
Mark
Re: SA 3.1.0 spamd error
Posted by jdow <jd...@earthlink.net>.
From: "Ralf Hildebrandt" <Ra...@charite.de>
>* Obantec Support <su...@obantec.net>:
>
>> i was being over curious so if 3.1.0 failed i could drop back to 3.0.0
>
> That makes sense.
>
>> guess i need to rebuild using default /usr/bin
>
> No, you need to fix the startup script to call the NEW version
I believe there are good odds that they will interfere with each other
since many configuration directories are common and yet need different
local.cf setup.
{^_^}
Re: SA 3.1.0 spamd error
Posted by Ralf Hildebrandt <Ra...@charite.de>.
* Obantec Support <su...@obantec.net>:
> i was being over curious so if 3.1.0 failed i could drop back to 3.0.0
That makes sense.
> guess i need to rebuild using default /usr/bin
No, you need to fix the startup script to call the NEW version
--
Ralf Hildebrandt (i.A. des IT-Zentrums) Ralf.Hildebrandt@charite.de
Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962
IT-Zentrum Standort CBF send no mail to spamtrap@charite.de
Re: SA 3.1.0 spamd error
Posted by jdow <jd...@earthlink.net>.
From: "Obantec Support" <su...@obantec.net>
> From: "Ralf Hildebrandt" <Ra...@charite.de>
>
>> * Obantec Support <su...@obantec.net>:
>> > Hi
>> >
>> > i have just built 3.1.0 using
>> > perl Makefile.PL PREFIX=/usr/local
>> > make
>> > make install
>>
>> THis installs to /usr/local/bin/...
>>
>> > trying to use the start-up script as root i get
>>
>> Which start.up script?
>>
>> > [root@proteus2 spamd]# /etc/rc.d/init.d/spamassassin start
>> > Starting spamd: ERROR! spamassassin script is v3.000000, but using
> modules
>> > v3.001003!
>>
>> Which spamasassin does this start?
>>
>> > SA 3.0.0 is still installed under /usr/bin
>>
>> What diy you expect when you installed the new version someplace else?
>>
>> --
>> Ralf Hildebrandt (i.A. des IT-Zentrums)
> Ralf.Hildebrandt@charite.de
>> Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450
> 570-155
>> Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450
> 570-962
>> IT-Zentrum Standort CBF send no mail to
> spamtrap@charite.de
>>
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Anti-Virus.
>> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21/07/2006
>>
>>
> Hi Ralf
>
> i was being over curious so if 3.1.0 failed i could drop back to 3.0.0
>
> guess i need to rebuild using default /usr/bin
Remove both root and branch and reinstall the more recent one, 3.1.3.
{^_^}
Re: SA 3.1.0 spamd error
Posted by Obantec Support <su...@obantec.net>.
----- Original Message -----
From: "Ralf Hildebrandt" <Ra...@charite.de>
To: <us...@spamassassin.apache.org>
Sent: Saturday, July 22, 2006 12:06 PM
Subject: Re: SA 3.1.0 spamd error
> * Obantec Support <su...@obantec.net>:
> > Hi
> >
> > i have just built 3.1.0 using
> > perl Makefile.PL PREFIX=/usr/local
> > make
> > make install
>
> THis installs to /usr/local/bin/...
>
> > trying to use the start-up script as root i get
>
> Which start.up script?
>
> > [root@proteus2 spamd]# /etc/rc.d/init.d/spamassassin start
> > Starting spamd: ERROR! spamassassin script is v3.000000, but using
modules
> > v3.001003!
>
> Which spamasassin does this start?
>
> > SA 3.0.0 is still installed under /usr/bin
>
> What diy you expect when you installed the new version someplace else?
>
> --
> Ralf Hildebrandt (i.A. des IT-Zentrums)
Ralf.Hildebrandt@charite.de
> Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450
570-155
> Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450
570-962
> IT-Zentrum Standort CBF send no mail to
spamtrap@charite.de
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21/07/2006
>
>
Hi Ralf
i was being over curious so if 3.1.0 failed i could drop back to 3.0.0
guess i need to rebuild using default /usr/bin
Mark
Re: SA 3.1.0 spamd error
Posted by Ralf Hildebrandt <Ra...@charite.de>.
* Obantec Support <su...@obantec.net>:
> Hi
>
> i have just built 3.1.0 using
> perl Makefile.PL PREFIX=/usr/local
> make
> make install
THis installs to /usr/local/bin/...
> trying to use the start-up script as root i get
Which start.up script?
> [root@proteus2 spamd]# /etc/rc.d/init.d/spamassassin start
> Starting spamd: ERROR! spamassassin script is v3.000000, but using modules
> v3.001003!
Which spamasassin does this start?
> SA 3.0.0 is still installed under /usr/bin
What diy you expect when you installed the new version someplace else?
--
Ralf Hildebrandt (i.A. des IT-Zentrums) Ralf.Hildebrandt@charite.de
Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962
IT-Zentrum Standort CBF send no mail to spamtrap@charite.de