You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@qpid.apache.org by ac...@apache.org on 2011/10/07 22:59:22 UTC
svn commit: r1180238 - in /qpid/branches/qpid-2920-active/qpid/cpp:
design_docs/new-cluster-design.txt design_docs/new-cluster-plan.txt
src/qpid/cluster/exp/overview.h
Author: aconway
Date: Fri Oct 7 20:59:22 2011
New Revision: 1180238
URL: http://svn.apache.org/viewvc?rev=1180238&view=rev
Log:
QPID-2920: Update new-cluster-design and new-cluster-plan to reflect current status.
Modified:
qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-design.txt
qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-plan.txt
qpid/branches/qpid-2920-active/qpid/cpp/src/qpid/cluster/exp/overview.h
Modified: qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-design.txt
URL: http://svn.apache.org/viewvc/qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-design.txt?rev=1180238&r1=1180237&r2=1180238&view=diff
==============================================================================
--- qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-design.txt (original)
+++ qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-design.txt Fri Oct 7 20:59:22 2011
@@ -17,7 +17,6 @@
# under the License.
* A new design for Qpid clustering.
-
** Issues with current design.
The cluster is based on virtual synchrony: each broker multicasts
@@ -95,8 +94,9 @@ Use a moving queue ownership protocol to
No longer relies on identical state and lock-step behavior to cause
identical dequeues on each broker.
-Each queue has an associated thread-context. Events for a queue are executed
-in that queues context, in parallel with events for other queues.
+Use multiple CPG groups to process different queues in parallel. Use a
+fixed set of groups and hash queue names to choose the group for each
+queue.
*** Requirements
@@ -149,7 +149,7 @@ a release-queue event, allowing another
ownership.
*** Asynchronous completion of accept
-### HERE
+
In acknowledged mode a message is not forgotten until it is accepted,
to allow for requeue on rejection or crash. The accept should not be
completed till the message has been forgotten.
@@ -162,19 +162,32 @@ On receiving an accept the broker:
NOTE: The message store does not currently implement asynchronous
completions of accept, this is a bug.
+*** Multiple CPG groups.
+
+The old cluster was bottlenecked by processing everything in a single
+CPG deliver thread.
+
+The new cluster uses a set of CPG groups, one per core. Queue names
+are hashed to give group indexes, so statistically queues are likely
+to be spread over the set of groups.
+
+Operations on a given queue always use the same group, so we have
+order within each queue, but operations on different queues can use
+different groups giving greater throughput sending to CPG and multiple
+handler threads to process CPG messages.
+
** Inconsistent errors.
-The new design eliminates most sources of inconsistent errors
-(connections, sessions, security, management etc.) The only points
-where inconsistent errors can occur are at enqueue and dequeue (most
-likely store-related errors.)
-
-The new design can use the exisiting error-handling protocol with one
-major improvement: since brokers are no longer required to maintain
-identical state they do not have to stall processing while an error is
-being resolved.
+An inconsistent error means that after multicasting an enqueue, accept
+or dequeue, some brokers succeed in processing it and others fail.
-#TODO: The only source of dequeue errors is probably an unrecoverable journal failure.
+The new design eliminates most sources of inconsistent errors in the
+old broker: connections, sessions, security, management etc. Only
+store journal errors remain.
+
+The new inconsistent error protocol is similar to the old one with one
+major improvement: brokers do not have to stall processing while an
+error is being resolved.
** Updating new members
@@ -193,60 +206,44 @@ catch up (which is not guaranteed to hap
With the new cluster design only exchanges, queues, bindings and
messages need to be replicated.
-Update of wiring (exchanges, queues, bindings) is the same as current
-design.
-
-Update of messages is different:
-- per-queue rather than per-broker, separate queues can be updated in parallel.
-- updates queues in reverse order to eliminate unbounded catch-up
-- does not require updater & updatee to stall during update.
-
-Replication events, multicast to cluster:
-- enqueue(q,m): message m pushed on back of queue q .
-- acquire(q,m): mark m acquired
-- dequeue(q,m): forget m.
-Messages sent on update connection:
-- update_front(q,m): during update, receiver pushes m to *front* of q
-- update_done(q): during update, update of q is complete.
-
-Updater:
-- when updatee joins set iterator i = q.end()
-- while i != q.begin(): --i; send update_front(q,*i) to updatee
-- send update_done(q) to updatee
-
-Updatee:
-- q initially in locked state, can't dequeue locally.
-- start processing replication events for q immediately (enqueue, dequeue, acquire etc.)
-- receive update_front(q,m): q.push_front(m)
-- receive update_done(q): q can be unlocked for local dequeing.
-
-Benefits:
-- Stall only for wiring update: updater & updatee can process multicast messages while messages are updated.
-- No unbounded catch-up: update consists of at most N update_front() messages where N=q.size() at start of update.
-- During update consumers actually help by removing messages before they need to be updated.
-- Needs no separate "work to do" queue, only the broker queues themselves.
-
-# TODO how can we recover from updater crashing before update complete?
-# Clear queues that are not updated & send request for udpates on those queues?
-
-# TODO updatee may receive a dequeue for a message it has not yet seen, needs
-# to hold on to that so it can drop the message when it is seen.
-# Similar problem exists for wiring?
+We update individual objects (queues and exchanges) independently.
+- create queues first, then update all queues and exchanges in parallel.
+- multiple updater threads, per queue/exchange.
+
+Queue updater:
+- marks the queue position at the sync point
+- sends messages starting from the sync point working towards the head of the queue.
+- send "done" message.
+
+Queue updatee:
+- enqueues received from CPG: add to back of queue as normal.
+- dequeues received from CPG: apply if found, else save to check at end of update.
+- messages from updater: add to the *front* of the queue.
+- update complete: apply any saved dequeues.
+
+Exchange updater:
+- updater: send snapshot of exchange as it was at the sync point.
+
+Exchange updatee:
+- queue exchange operations after the sync point.
+- when snapshot is received: apply saved operations.
+
+Note:
+- Updater is active throughout, no stalling.
+- Consuming clients actually reduce the size of the update.
+- Updatee stalls clients until the update completes.
+ (Note: May be possible to avoid updatee stall as well, needs thought)
** Cluster API
-The new cluster API is similar to the MessageStore interface.
-(Initially I thought it would be an extension of the MessageStore interface,
-but as the design develops it seems better to make it a separate interface.)
+The new cluster API is similar to the MessageStore interface, but
+provides more detail (message positions) qand some additional call
+points (e.g. acquire)
The cluster interface captures these events:
- wiring changes: queue/exchange declare/bind
- message enqueued/acquired/released/rejected/dequeued.
-
-The cluster will require some extensions to the Queue:
-- Queues can be "locked", locked queues are ignored by IO-driven output.
-- Cluster must be able to apply queue events from the cluster to a queue.
- These appear to fit into existing queue operations.
+- transactional events.
** Maintainability
@@ -273,106 +270,28 @@ A number of specific ways the code will
** Performance
-The only way to verify the relative performance of the new design is
-to prototype & profile. The following points suggest the new design
-may scale/perform better:
-
-Some work moved from virtual synchrony thread to connection threads:
-- All connection/session logic moves to connection thread.
-- Exchange routing logic moves to connection thread.
-- On local broker dequeueing is done in connection thread
-- Local broker dequeue is IO driven as for a standalone broker.
-
-For queues with all consumers on a single node dequeue is all
-IO-driven in connection thread. Pay for time-sharing only if queue has
-consumers on multiple brokers.
-
-Doing work for different queues in parallel scales on multi-core boxes when
-there are multiple queues.
-
-One difference works against performance, thre is an extra
-encode/decode. The old design multicasts raw client data and decodes
-it in the virtual synchrony thread. The new design would decode
-messages in the connection thread, re-encode them for multicast, and
-decode (on non-local brokers) in the virtual synchrony thread. There
-is extra work here, but only in the *connection* thread: on a
-multi-core machine this happens in parallel for every connection, so
-it probably is not a bottleneck. There may be scope to optimize
-decode/re-encode by re-using some of the original encoded data, this
-could also benefit the stand-alone broker.
-
-** Asynchronous queue replication
-
-The existing "asynchronous queue replication" feature maintains a
-passive backup passive backup of queues on a remote broker over a TCP
-connection.
-
-The new cluster replication protocol could be re-used to implement
-asynchronous queue replication: its just a special case where the
-active broker is always the queue owner and the enqueue/dequeue
-messages are sent over a TCP connection rather than multicast.
-
-The new update update mechanism could also work with 'asynchronous
-queue replication', allowing such replication (over a TCP connection
-on a WAN say) to be initiated after the queue had already been created
-and been in use (one of the key missing features).
-
-** Increasing Concurrency and load sharing
-
-The current cluster is bottlenecked by processing everything in the
-CPG deliver thread. By removing the need for identical operation on
-each broker, we open up the possiblility of greater concurrency.
-
-Handling multicast enqueue, acquire, accpet, release etc: concurrency
-per queue. Operatons on different queues can be done in different
-threads.
-
-The new design does not force each broker to do all the work in the
-CPG thread so spreading load across cluster members should give some
-scale-up.
-
-** Misc outstanding issues & notes
-
-Replicating wiring
-- Need async completion of wiring commands?
-- qpid.sequence_counter: need extra work to support in new design, do we care?
-
-Cluster+persistence:
-- finish async completion: dequeue completion for store & cluster
-- cluster restart from store: clean stores *not* identical, pick 1, all others update.
-- need to generate cluster ids for messages recovered from store.
-
-Live updates: we don't need to stall brokers during an update!
-- update on queue-by-queue basis.
-- updatee locks queues during update, no dequeue.
-- update in reverse: don't update messages dequeued during update.
-- updatee adds update messages at front (as normal), replicated messages at back.
-- updater starts from back, sends "update done" when it hits front of queue.
-
-Flow control: need to throttle multicasting
-1. bound the number of outstanding multicasts.
-2. ensure the entire cluster keeps up, no unbounded "lag"
-The existing design uses read-credit to solve 1., and does not solve 2.
-New design should stop reading on all connections while flow control
-condition exists?
-
-Can federation also be unified, at least in configuration?
-
-Consider queues (and exchanges?) as having "reliability" attributes:
-- persistent: is the message stored on disk.
-- backed-up (to another broker): active/passive async replication.
-- replicated (to a cluster): active/active multicast replication to cluster.
-- federated: federation link to a queue/exchange on another broker.
-
-"Reliability" seems right for the first 3 but not for federation, is
-there a better term?
-
-Clustering and scalability: new design may give us the flexibility to
-address scalability as part of cluster design. Think about
-relationship to federation and "fragmented queues" idea.
+The standalone broker processes _connections_ concurrently, so CPU
+usage increases as you add more connections.
+
+The new cluster processes _queues_ concurrently, so CPU usage increases as you
+add more queues.
-* Design debates/descisions
+In both cases, CPU usage peaks when the number of "units of
+ concurrency" (connections or queues) goes above the number of cores.
+When all consumers on a queue are connected to the same broker the new
+cluster uses the same messagea allocation threading/logic as a
+standalone broker, with a little extra asynchronous book-keeping.
+
+If a queue has multiple consumers connected to multiple brokers, the
+new cluster time shares the queue which is less efficient than having
+all consumers connected to the same broker.
+
+** Flow control
+New design does not queue up CPG delivered messages, they are
+processed immediately in the CPG deliver thread. This means that CPG's
+ flow control is sufficient for qpid.
+* Design debates
** Active/active vs. active passive
An active-active cluster can be used in an active-passive mode. In
@@ -385,7 +304,7 @@ An active/passive implementation allows
- can do immediate local enqueue and still guarantee order.
Active/passive introduces a few extra requirements:
-- Exactly one broker hast to take over if primary fails.
+- Exactly one broker has to take over if primary fails.
- Passive members must refuse client connections.
- On failover, clients must re-try all known addresses till they find the active member.
@@ -393,43 +312,17 @@ Active/active benefits:
- A broker failure only affects the subset of clients connected to that broker.
- Clients can switch to any other broker on failover
- Backup brokers are immediately available on failover.
-- Some load sharing: reading from client + multicast only done on direct node.
-
-Active/active drawbacks:
-- Co-ordinating message acquisition may impact performance (not tested)
-- Code may be more complex that active/passive.
+- As long as a client can connect to any broker in the cluster, it can be served.
Active/passive benefits:
-- Don't need message allocation strategy, can feed consumers at top speed.
-- Code may be simpler than active/active.
+- Don't need to replicate message allocation, can feed consumers at top speed.
Active/passive drawbacks:
- All clients on one node so a failure affects every client in the system.
- After a failure there is a "reconnect storm" as every client reconnects to the new active node.
- After a failure there is a period where no broker is active, until the other brokers realize the primary is gone and agree on the new primary.
- Clients must find the single active node, may involve multiple connect attempts.
+- No service if a partition separates a client from the active broker,
+ even if the client can see other brokers.
-** Total ordering.
-
-Initial thinking: allow message ordering to differ between brokers.
-New thinking: use CPG total ordering, get identical ordering on all brokers.
-- Allowing variation in order introduces too much chance of unexpected behavior.
-- Usign total order allows other optimizations, see Message Identifiers below.
-
-** Message identifiers.
-
-Initial thinking: message ID = CPG node id + 64 bit sequence number.
-This involves a lot of mapping between cluster IDs and broker messsages.
-
-New thinking: message ID = queue name + queue position.
-- Removes most of the mapping and memory management for cluster code.
-- Requires total ordering of messages (see above)
-
-** Message rejection
-
-Initial thinking: add special reject/rejected points to cluster interface so
-rejected messages could be re-queued without multicast.
-New thinking: treat re-queueing after reject as entirely new message.
-- Simplifies cluster interface & implementation
-- Not on the critical path.
Modified: qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-plan.txt
URL: http://svn.apache.org/viewvc/qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-plan.txt?rev=1180238&r1=1180237&r2=1180238&view=diff
==============================================================================
--- qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-plan.txt (original)
+++ qpid/branches/qpid-2920-active/qpid/cpp/design_docs/new-cluster-plan.txt Fri Oct 7 20:59:22 2011
@@ -17,361 +17,140 @@
# specific language governing permissions and limitations
# under the License.
+* Status of impementation
-Notes on new cluster implementation. See also: new-cluster-design.txt
+Meaning of priorities:
+[#A] Essential for basic functioning.
+[#B] Required for first release.
+[#C] Can be addressed in a later release.
-* Implementation plan.
+The existig prototype is bare bones to do performance benchmarks:
+- Implement publish and consumer locking protocol.
+- Defered delivery and asynchronous completion of message till self-delivered.
+- Optimize the case all consumers are on the same node.
+- No new member updates, no failover updates, no transactions, no persistence etc.
+
+Prototype code is on branch qpid-2920-active, in cpp/src/qpid/cluster/exp/
+
+** Similarities to existing cluster.
+
+/Active-active/: the new cluster can be a drop-in replacement for the
+old, existing tests & customer deployment configurations are still
+valid.
+
+/Virtual synchrony/: Uses corosync to co-ordinate activity of members.
+
+/XML controls/: Uses XML to define the primitives multicast to the
+cluster.
+
+** Differences with existing cluster.
+
+/Report rather than predict consumption/: brokers explicitly tell each
+other which messages have been acquired or dequeued. This removes the
+major cause of bugs in the existing cluster.
+
+/Queue consumer locking/: to avoid duplicates only one broker can acquire or
+dequeue messages at a time - while has the consume-lock on the
+queue. If multiple brokers are consuming from the same queue the lock
+is passed around to time-share access to the queue.
+
+/Per-queue concurrency/: uses a fixed-size set of CPG groups (reflecting
+the concurrency of the host) to allow concurrent processing on
+different queues. Queues are hashed onto the groups.
+
+* Completed tasks
+** DONE [#A] Minimal POC: publish/acquire/dequeue protocol.
+ CLOSED: [2011-10-05 Wed 16:03]
+
+Defines broker::Cluster interface and call points.
+Initial interface commite
+
+Main classes
+Core: central object holding cluster classes together (replaces cluster::Cluster)
+BrokerContext: implements broker::Cluster interface.
+QueueContext: Attached to a broker::Queue, holds cluster status.
+MessageHolder:holds local messages while they are being enqueued.
+
+Implements multiple CPG groups for better concurrency.
+
+** DONE [#A] Large message replication.
+ CLOSED: [2011-10-05 Wed 17:22]
+Multicast using fixed-size (64k) buffers, allow fragmetation of messages across buffers (frame by frame)
+
+* Open questions
+
+
+** TODO [#A] Queue sequence numbers vs. independant message IDs.
+ SCHEDULED: <2011-10-07 Fri>
+
+Current prototype uses queue sequence numbers to identify
+message. This is tricky for updating new members as the sequence
+numbers are only known on delivery.
+
+Independent message IDs that can be generated and sent with the message simplify
+this and potentially allow performance benefits by relaxing total ordering.
+However they imply additional map lookups that might hurt performance.
+
+- [ ] Prototype independent message IDs, check performance.
+
+* Outstanding Tasks
+** TODO [#A] Defer and async complete wiring commands.
+
+Testing requirement: Many tests assume wiring changes are visible
+across the cluster once the commad completes.
+
+Name clashes: avoid race if same name queue/exchange declared on 2
+brokers simultaneously
-Co-existence with old cluster code and tests:
-- Separate plugin cluster2, options --cluster2-*. Eventually renamed to replace cluster.
-- Double up tests with old version/new version as the new code develops.
-
-Minimal POC for message delivery & perf test.
-- no wiring replication, no updates, no failover, no persistence, no async completion.
-- just implement publish and acquire/dequeue locking protocol.
-- optimize the special case where all consumers are on the same node.
-- measure performance: compare active-passive and active-active modes of use.
-
-Full implementation of transient cluster
-- Update (based on existing update), async completion etc.
-- Passing all existing transient cluster tests.
-
-Persistent cluster
-- Make sure async completion works correctly.
-- InitialStatus protoocl etc. to support persistent start-up (existing code)
-- cluster restart from store: stores not identical. Load one, update the rest.
- - assign cluster ID's to messages recovered from store, don't replicate.
-
-Improved update protocol
-- per-queue, less stalling, bounded catch-up.
-
-* Task list
-
-** TODO [#A] Minimal POC: publish/acquire/dequeue protocol.
-
-NOTE: as implementation questions arise, take the easiest option and make
-a note for later optimization/improvement.
-
-*** Tests
-- python test: 4 senders, numbered messages, 4 receivers, verify message set.
-- acquire then release messages: verify can be dequeued on any member
-- acquire then kill broker: verify can be dequeued other members.
-- acquire then reject: verify goes on alt-exchange once only.
-
-*** DONE broker::Cluster interface and call points.
-
-Initial interface commited.
-
-*** Main classes
-
-BrokerHandler:
-- implements broker::Cluster intercept points.
-- sends mcast events to inform cluster of local actions.
-- thread safe, called in connection threads.
-
-LocalMessageMap:
-- Holds local messages while they are being enqueued.
-- thread safe: called by both BrokerHandler and MessageHandler
-
-MessageHandler:
-- handles delivered mcast messages related to messages.
-- initiates local actions in response to mcast events.
-- thread unsafe, only called in deliver thread.
-- maintains view of cluster state regarding messages.
-
-QueueOwnerHandler:
-- handles delivered mcast messages related to queue consumer ownership.
-- thread safe, called in deliver, connection and timer threads.
-- maintains view of cluster state regarding queue ownership.
-
-cluster::Core: class to hold new cluster together (replaces cluster::Cluster)
-- thread safe: manage state used by both MessageHandler and BrokerHandler
-
-The following code sketch illustrates only the "happy path" error handling
-is omitted.
-
-*** BrokerHandler
-Types:
-- struct QueuedMessage { Message msg; QueueName q; SequenceNumber position; }
-- struct
-
-NOTE:
-- Messages on queues are identified by a queue name + a position.
-- Messages being routed are identified by a sequence number.
-
-Members:
-- thread_local bool noReplicate // suppress replication.
-- thread_local bool isRouting // suppress operations while routing
-- Message localMessage[SequenceNumber] // local messages being routed.
-- thread_local SequenceNumber routingSequence
-
-NOTE: localMessage is also modified by MessageHandler.
-
-broker::Cluster intercept functions:
-
-routing(msg)
- if noReplicate: return
- # Supress everything except enqueues while we are routing.
- # We don't want to replicate acquires & dequeues caused by an enqueu,
- # e.g. removal of messages from ring/LV queues.
- isRouting = true
-
-enqueue(qmsg):
- if noReplicate: return
- if routingSequence == 0 # thread local
- routingSequence = nextRoutingSequence()
- mcast create(encode(qmsg.msg),routingSeq)
- mcast enqueue(qmsg.q,routingSeq)
-
-routed(msg):
- if noReplicate: return
- isRouting = false
-
-acquire(qmsg):
- if noReplicate: return
- if isRouting: return # Ignore while we are routing a message.
- if msg.id: mcast acquire(qmsg)
-
-release(QueuedMessage)
- if noReplicate: return
- if isRouting: return # Ignore while we are routing a message.
- mcast release(qmsg)
-
-accept(QueuedMessage):
- if noReplicate: return
- if isRouting: return # Ignore while we are routing a message.
- mcast accept(qmsg)
-
-reject(QueuedMessage):
- isRejecting = true
- mcast reject(qmsg)
-
-*** MessageHandler and mcast messages
-Types:
-- struct QueueEntry { QueuedMessage qmsg; NodeId acquired; }
-- struct QueueKey { MessageId id; QueueName q; }
-- typedef map<QueueKey, QueueEntry> Queue
-- struct Node { Message routing[SequenceNumber]; list<QueueKey> acquired; }
-
-Members:
-- QueueEntry enqueued[QueueKey]
-- Node node[NodeId]
-
-Mcast messages in Message class:
-
-create(msg,seq)
- if sender != self: node[sender].routing[seq] = decode(msg)
-
-enqueue(q,seq):
- id = (sender,seq)
- if sender == self:
- enqueued[id,q] = (localMessage[seq], acquired=None)
- else:
- msg = sender.routing[seq]
- enqueued[id,q] = (qmsg, acquired=None)
- with noReplicate=true: qmsg = broker.getQueue(q).push(msg)
-
-routed(seq):
- if sender == self: localMessage.erase(msg.id.seq)
- else: sender.routing.erase(seq)
-
-acquire(id,q):
- enqueued[id,q].acquired = sender
- node[sender].acquired.push_back((id,q))
- if sender != self:
- with noReplicate=true: broker.getQueue(q).acquire(enqueued[id,q])
-
-release(id,q)
- enqueued[id,q].acquired = None
- node[sender].acquired.erase((id,q))
- if sender != self
- with noReplicate=true: broker.getQueue(q).requeue(enqueued[id,q])
-
-reject(id,q):
- sender.routing[id] = enqueued[id,q] # prepare for re-queueing
-
-rejected(id,q)
- sender.routing.erase[id]
-
-dequeue(id,q)
- entry = enqueued[id,q]
- enqueued.erase[id,q]
- node[entry.acquired].acquired.erase(id,q)
- if sender != self:
- with noReplicate=true: broker.getQueue(q).dequeue(entry.qmsg)
-
-member m leaves cluster:
- for key in node[m].acquired:
- release(key.id, key.q)
- node.erase(m)
-
-*** Queue consumer locking
-
-When a queue is locked it does not deliver messages to its consumers.
-
-New broker::Queue functions:
-- stopConsumers(): set consumersStopped flag, wait for currently busy consumers to exit.
-- startConsumers(): reset consumersStopped flag
-
-Implementation sketch, locking omitted:
-
-void Queue::stopConsumers() {
- consumersStopped = true;
- while (consumersBusy) consumersBusyMonitor.wait();
-}
-
-void Queue::startConsumers() {
- consumersStopped = false;
- listeners.notify();
-}
-
-bool Queue::dispatch(consumer) {
- if (consumersStopped) return false;
- ++consumersBusy;
- do_regular_dispatch_body()
- if (--consumersBusy == 0) consumersBusyMonitor.notify();
-}
-
-*** QueueOwnerHandler
-
-Invariants:
-- Each queue is owned by at most one node at any time.
-- Each node is interested in a set of queues at any given time.
-- A queue is un-owned if no node is interested.
-
-The queue owner releases the queue when
-- it loses interest i.e. queue has no consumers with credit.
-- a configured time delay expires and there are other interested nodes.
-
-The owner mcasts release(q). On delivery the new queue owner is the
-next node in node-id order (treating nodes as a circular list)
-starting from the old owner that is interested in the queue.
-
-Queue consumers initially are stopped, only started when we get
-ownership from the cluster.
-
-Thread safety: called by deliver, connection and timer threads, needs locking.
-
-Thread safe object per queue holding queue ownership status.
-Called by deliver, connection and timer threads.
-
-class QueueOwnership {
- bool owned;
- Timer timer;
- BrokerQueue q;
-
- drop(): # locked
- if owned:
- owned = false
- q.stopConsumers()
- mcast release(q.name, false)
- timer.stop()
-
- take(): # locked
- if not owned:
- owned = true
- q.startConsumers()
- timer.start(timeout)
-
- timer.fire(): drop()
-}
-
-Data Members, only modified/examined in deliver thread:
-- typedef set<NodeId> ConsumerSet
-- map<QueueName, ConsumerSet> consumers
-- map<QueueName, NodeId> owner
-
-Thread safe data members, accessed in connection threads (via BrokerHandler):
-- map<QueueName, QueueOwnership> ownership
-
-Multicast messages in QueueOwner class:
-
-consume(q):
- if sender==self and consumers[q].empty(): ownership[q].take()
- consumers[q].insert(sender)
-
-release(q):
- asssert(owner[q] == sender and owner[q] in consumers[q])
- owner[q] = circular search from sender in consumers[q]
- if owner==self: ownership[q].take()
-
-cancel(q):
- assert(queue[q].owner != sender) # sender must release() before cancel()
- consumers[q].erase(sender)
-
-member-leaves:
- for q in queue: if owner[q] = left: left.release(q)
-
-Need 2 more intercept points in broker::Cluster:
-
-consume(q,consumer,consumerCount) - Queue::consume()
- if consumerCount == 1: mcast consume(q)
-
-cancel(q,consumer,consumerCount) - Queue::cancel()
- if consumerCount == 0:
- ownership[q].drop()
- mcast cancel(q)
-
-#TODO: lifecycle, updating cluster data structures when queues are destroyed
-
-*** Increasing concurrency
-The major performance limitation of the old cluster is that it does
-everything in the single CPG deliver thread context.
-
-We can get additional concurrency by creating a thread context _per queue_
-for queue operations: enqueue, acquire, accept etc.
-
-We associate a PollableQueue of queue operations with each AMQP queue.
-The CPG deliver thread would
-- build messages and associate with cluster IDs.
-- push queue ops to the appropriate PollableQueue to be dispatched the queues thread.
-
-Serializing operations on the same queue avoids contention, but takes advantage
-of the independence of operations on separate queues.
-
-*** Re-use of existing cluster code
-- re-use Event
-- re-use Multicaster
-- re-use same PollableQueueSetup (may experiment later)
-- new Core class to replace Cluster.
-- keep design modular, keep threading rules clear.
-
-** TODO [#B] Large message replication.
-Multicast should encode messages in fixed size buffers (64k)?
-Can't assume we can send message in one chunk.
-For 0-10 can use channel numbers & send whole frames packed into larger buffer.
-** TODO [#B] Transaction support.
-Extend broker::Cluster interface to capture transaction context and completion.
-Sequence number to generate per-node tx IDs.
-Replicate transaction completion.
** TODO [#B] Management support
+
- Replicate management methods that modify queues - e.g. move, purge.
- Report connections - local only or cluster-wide?
-** TODO [#B] Batch CPG multicast messages
-The new cluster design involves a lot of small multicast messages,
-they need to be batched into larger CPG messages for efficiency.
-** TODO [#B] Genuine async completion
-Replace current synchronous waiting implementation with genuine async completion.
-
-Test: enhance test_store.cpp to defer enqueueComplete till special message received.
-Async callback uses *requestIOProcessing* to queue action on IO thread.
+** TODO [#A] Update to new members joining.
-** TODO [#B] Async completion of accept when dequeue completes.
-Interface is already there on broker::Message, just need to ensure
-that store and cluster implementations call it appropriately.
+Need to resolve [[Queue sequence numbers vs. independant message IDs]] first.
+- implicit sequence numbers are more tricky to replicate to new member.
-** TODO [#B] Replicate wiring.
-From messageStore create/destroy/bind, replicate encoded declare/destroy/bind command.
+Update individual objects (queues and exchanges) independently.
+- create queues first, then update all queues and exchanges in parallel.
+- multiple updater threads, per queue/exchange.
+- updater sends messages to special exchange(s) (not using extended AMQP controls)
+
+Queue updater:
+- marks the queue position at the sync point
+- sends messages starting from the sync point working towards the head of the queue.
+- send "done" message.
+Note: updater remains active throughout, consuming clients actually reduce the
+size of the update.
+
+Queue updatee:
+- enqueues received from CPG: add to back of queue as normal.
+- dequeues received from CPG: apply if found, else save to check at end of update.
+- messages from updater: add to the *front* of the queue.
+- update complete: apply any saved dequeues.
+
+Exchange updater:
+- updater: send snapshot of exchange as it was at the sync point.
+
+Exchange updatee:
+- queue exchange operations after the sync point.
+- when snapshot is received: apply saved operations.
-** TODO [#B] New members joining - first pass
+Updater remains active throughout.
+Updatee stalls clients until the update completes.
-Re-use update code from old cluster but don't replicate sessions &
-connections.
-
-Need to extend it to send cluster IDs with messages.
+** TODO [#B] TX transaction support.
+Extend broker::Cluster interface to capture transaction context and completion.
+Running brokers exchange TX information.
+New broker update includes TX information.
-Need to replicate the queue ownership data as part of the update.
+** TODO [#B] DTX transaction support.
+Extend broker::Cluster interface to capture transaction context and completion.
+Running brokers exchange DTX information.
+New broker update includes DTX information.
+** TODO [#B] Async completion of accept.
+When this is fixed in the standalone broker, it should be fixed for cluster.
** TODO [#B] Persistence support.
InitialStatus protoocl etc. to support persistent start-up (existing code)
@@ -382,9 +161,7 @@ Assign cluster IDs to messages recovered
** TODO [#B] Handle other ways that messages can leave a queue.
-Other ways (other than via a consumer) that messages are take off a queue.
-
-NOTE: Not controlled by queue lock, how to make them consistent?
+Ways other than a consumer that messages are taken off a queue.
Target broker may not have all messages on other brokers for purge/destroy.
- Queue::move() - need to wait for lock? Replicate?
@@ -394,66 +171,18 @@ Target broker may not have all messages
Need to add callpoints & mcast messages to replicate these?
-** TODO [#B] Flow control for internal queues.
-
-Need to bound the size of internal queues: delivery and multicast.
-- stop polling for read on client connections when we reach a bound.
-- restart polling when we get back under it.
-
-That will stop local multicasting, we still have to deal with remote
-multicasting (note existing cluster does not do this.) Something like:
-- when over bounds multicast a flow-control event.
-- on delivery of flow-control all members stop polling to read client connections
-- when back under bounds send flow-control-end, all members resume
-- if flow-controling member dies others resume
-
-** TODO [#B] Integration with transactions.
-Do we want to replicate during transaction & replicate commit/rollback
-or replicate only on commit?
-No integration with DTX transactions.
-** TODO [#B] Make new cluster work with replication exchange.
-Possibly re-use some common logic. Replication exchange is like clustering
-except over TCP.
-** TODO [#B] Better concurrency, scalabiility on multi-cores.
-Introduce PollableQueue of operations per broker queue. Queue up mcast
-operations (enqueue, acquire, accept etc.) to be handled concurrently
-on different queue. Performance testing to verify improved scalability.
-** TODO [#C] Async completion for declare, bind, destroy queues and exchanges.
-Cluster needs to complete these asynchronously to guarantee resources
-exist across the cluster when the command completes.
+** TODO [#B] Network partitions and quorum.
+Re-use existing implementation.
** TODO [#C] Allow non-replicated exchanges, queues.
-Set qpid.replicated=false in declare arguments, set flag on Exchange, Queue objects.
+Set qpid.replicate=false in declare arguments, set flag on Exchange, Queue objects.
- save replicated status to store.
- support in management tools.
-Replicated exchange: replicate binds to replicated queues.
Replicated queue: replicate all messages.
+Replicated exchange: replicate bindings to replicated queues only.
-** TODO [#C] New members joining - improved.
-
-Replicate wiring like old cluster, stall for wiring but not for
-messages. Update messages on a per-queue basis from back to front.
-
-Updater:
-- stall & push wiring: declare exchanges, queues, bindings.
-- start update iterator thread on each queue.
-- unstall and process normally while iterator threads run.
-
-Update iterator thread:
-- starts at back of updater queue, message m.
-- send update_front(q,m) to updatee and advance towards front
-- at front: send update_done(q)
-
-Updatee:
-- stall, receive wiring, lock all queues, mark queues "updating", unstall
-- update_front(q,m): push m to *front* of q
-- update_done(q): mark queue "ready"
-
-Updatee cannot take the queue consume lock for a queue that is updating.
-Updatee *can* push messages onto a queue that is updating.
-
-TODO: Is there any way to eliminate the stall for wiring?
+Configurable default? Defaults to true.
** TODO [#C] Refactoring of common concerns.
@@ -468,9 +197,38 @@ Look for ways to capitalize on the simil
In particular QueuedEvents (async replication) strongly resembles
cluster replication, but over TCP rather than multicast.
-** TODO [#C] Concurrency for enqueue events.
-All enqueue events are being processed in the CPG deliver thread context which
-serializes all the work. We only need ordering on a per queue basis, can we
-enqueue in parallel on different queues and will that improve performance?
+
** TODO [#C] Handling immediate messages in a cluster
Include remote consumers in descision to deliver an immediate message?
+** TODO [#C] Remove old cluster hacks and workarounds
+The old cluster has workarounds in the broker code that can be removed.
+- [ ] drop code to replicate management model.
+- [ ] drop timer workarounds for TTL, management, heartbeats.
+- [ ] drop "cluster-safe assertions" in broker code.
+- [ ] drop connections, sessions, management from cluster update.
+- [ ] drop security workarounds: cluster code now operates after message decoding.
+- [ ] drop connection tracking in cluster code.
+- [ ] simper inconsistent-error handling code, no need to stall.
+** TODO [#C] Support for live updates.
+Allow brokers in a running cluster to be replaced one-by-one with a new version.
+
+The old cluster protocol was unstable because any changes in broker
+state caused changes to the cluster protocol.The new design should be
+much more stable.
+
+TODO: think about strategies for allowing live updates while extending
+the cluster protocol
+
+
+
+
+
+** TODO [#C] Support for AMQP 1.0.
+
+* Testing
+** TODO [#A] Pass all existing cluster tests.
+Requires [[Defer and async complete wiring commands.]]
+** TODO [#A] New cluster tests.
+Stress tests & performance benchmarks focused on changes in new cluster:
+- concurrency by queues rather than connections.
+- different handling shared queues when consuemrs are on different brokers.
Modified: qpid/branches/qpid-2920-active/qpid/cpp/src/qpid/cluster/exp/overview.h
URL: http://svn.apache.org/viewvc/qpid/branches/qpid-2920-active/qpid/cpp/src/qpid/cluster/exp/overview.h?rev=1180238&r1=1180237&r2=1180238&view=diff
==============================================================================
--- qpid/branches/qpid-2920-active/qpid/cpp/src/qpid/cluster/exp/overview.h (original)
+++ qpid/branches/qpid-2920-active/qpid/cpp/src/qpid/cluster/exp/overview.h Fri Oct 7 20:59:22 2011
@@ -3,15 +3,13 @@
<h1>New cluster implementation overview</h>
-The code is broken down into 3 areas indicated by a suffix on class names:
+Naming conventions: There are 3 types of classes indicated by a suffix on class names:
-- Replica: State that is replicated to the entire cluster.
+- *Handler: Dispatch CPG messages by calling Replica objects in the deliver thread.
+
+- *Replica: State that is replicated to the entire cluster.
Only called by Handlers in the deliver thread. May call on Contexts.
-- Context: State private to this member and associated with a local entity
+- *Context: State private to this member and associated with a local entity
such as the Broker or a Queue. Called in deliver and connection threads.
-
-- Handler: Dispatch CPG messages by calling Replica objects in the deliver thread.
-
-
**/
---------------------------------------------------------------------
Apache Qpid - AMQP Messaging Implementation
Project: http://qpid.apache.org
Use/Interact: mailto:commits-subscribe@qpid.apache.org