You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@quickstep.apache.org by Marc Spehlmann <sp...@gmail.com> on 2016/12/11 17:54:41 UTC
blog
Hey, we have a jekyll blog and a first blog article now! It can be viewed
here http://apache.github.io/incubator-quickstep/
It's a page automatically generated by github. We can probably change the
URL somehow, not sure off hand though.
Editting instructions are included in the readme here
https://github.com/apache/incubator-quickstep/tree/gh-pages
If anyone wants to touch up the css or layout, have at it. I'm no web
design expert, I rely on the pre-built themes.
Anyone can write a post, all you need to know is markdown.
Happy blogging!
Re: blog
Posted by Julian Hyde <jh...@apache.org>.
I don’t believe that Apache infra allows projects to change DNS. So you need to move your content onto quickstep.apache.org <http://quickstep.apache.org/>, not move the DNS record to point to your content. That isn’t too hard.
There are a few options[1], but I’m most familiar with svnpubsub and would recommend it, Basically you commit the contents of your web site into a subversion repository, and it immediately appears on Apache. Very straightforward.
It’s entirely up to you how you author the contents of the site. You can do it manually, or use a maven site generator, or write your own generator. As I said, at Calcite we use Jekyll, so the effect is very similar to GitHub pages, and as a bonus it handles large generated content like javadoc or doxygen better.
There is an Apache project which provides a template[2]. Give it a try.
Julian
[1] https://www.apache.org/dev/project-site.html <https://www.apache.org/dev/project-site.html>
[2] https://github.com/apache/apache-website-template <https://github.com/apache/apache-website-template>
> On Dec 11, 2016, at 6:39 PM, Marc Spehlmann <sp...@gmail.com> wrote:
>
> Hi Julian, I'm sure that we will be!
>
> And in an effort to consolidate the number of quickstep pages, I'm
> wondering if you'd know where the switch is that tells the DNS servers
> where to point traffic to quickstep.apache.org <http://quickstep.apache.org/>? Right now I think it's
> pointing to this (https://github.com/apache/incubator-quickstep-site <https://github.com/apache/incubator-quickstep-site>)
> github repo, which is obsolete now that all the info has been copied over
> to quickstep's gh-pages branch.
>
> Best,
> Marc
>
> On Sun, Dec 11, 2016 at 4:54 PM, Julian Hyde <jhyde@apache.org <ma...@apache.org>> wrote:
>
>> By the way, I think for now publishing to GitHub.io is just fine. The blog
>> post is great — content like this is great outreach.
>>
>> Speaking of outreach, the ApacheQuickstep twitter account has been very
>> quiet. How about tweeting a link to the blog post? I think you could find a
>> couple of newsworthy events every week to tweet about.
>>
>> Julian
>>
>>
>>> On Dec 11, 2016, at 2:40 PM, Julian Hyde <jh...@apache.org> wrote:
>>>
>>> I’m a fan of Jekyll too. Note that you can use the same markup to write
>> pages and then deploy them to Apache. In fact Calcite’s web site does
>> exactly that[1]. You need to install Jekyll but that isn’t too difficult.
>>>
>>> Julian
>>>
>>> [1] https://github.com/apache/calcite/blob/master/site/README.md <
>> https://github.com/apache/calcite/blob/master/site/README.md <https://github.com/apache/calcite/blob/master/site/README.md>>
>>>
>>>> On Dec 11, 2016, at 12:36 PM, Hakan Memisoglu <
>> hakanmemisoglu@apache.org <ma...@apache.org> <mailto:hakanmemisoglu@apache.org <ma...@apache.org>>> wrote:
>>>>
>>>> Thanks Marc for the effort!
>>>>
>>>>
>>>> On 12/11/2016 11:54 AM, Marc Spehlmann wrote:
>>>>> Hey, we have a jekyll blog and a first blog article now! It can be
>> viewed
>>>>>
>>>>> here http://apache.github.io/incubator-quickstep/ <http://apache.github.io/incubator-quickstep/> <
>> http://apache.github.io/incubator-quickstep/ <http://apache.github.io/incubator-quickstep/>>
>>>>>
>>>>> It's a page automatically generated by github. We can probably change
>> the
>>>>> URL somehow, not sure off hand though.
>>>>>
>>>>> Editting instructions are included in the readme here
>>>>>
>>>>> https://github.com/apache/incubator-quickstep/tree/gh-pages <https://github.com/apache/incubator-quickstep/tree/gh-pages> <
>> https://github.com/apache/incubator-quickstep/tree/gh-pages <https://github.com/apache/incubator-quickstep/tree/gh-pages>>
>>>>>
>>>>> If anyone wants to touch up the css or layout, have at it. I'm no web
>>>>> design expert, I rely on the pre-built themes.
>>>>>
>>>>> Anyone can write a post, all you need to know is markdown.
>>>>>
>>>>> Happy blogging!
Re: blog
Posted by Marc Spehlmann <sp...@gmail.com>.
Hi Julian, I'm sure that we will be!
And in an effort to consolidate the number of quickstep pages, I'm
wondering if you'd know where the switch is that tells the DNS servers
where to point traffic to quickstep.apache.org? Right now I think it's
pointing to this (https://github.com/apache/incubator-quickstep-site)
github repo, which is obsolete now that all the info has been copied over
to quickstep's gh-pages branch.
Best,
Marc
On Sun, Dec 11, 2016 at 4:54 PM, Julian Hyde <jh...@apache.org> wrote:
> By the way, I think for now publishing to GitHub.io is just fine. The blog
> post is great — content like this is great outreach.
>
> Speaking of outreach, the ApacheQuickstep twitter account has been very
> quiet. How about tweeting a link to the blog post? I think you could find a
> couple of newsworthy events every week to tweet about.
>
> Julian
>
>
> > On Dec 11, 2016, at 2:40 PM, Julian Hyde <jh...@apache.org> wrote:
> >
> > I’m a fan of Jekyll too. Note that you can use the same markup to write
> pages and then deploy them to Apache. In fact Calcite’s web site does
> exactly that[1]. You need to install Jekyll but that isn’t too difficult.
> >
> > Julian
> >
> > [1] https://github.com/apache/calcite/blob/master/site/README.md <
> https://github.com/apache/calcite/blob/master/site/README.md>
> >
> >> On Dec 11, 2016, at 12:36 PM, Hakan Memisoglu <
> hakanmemisoglu@apache.org <ma...@apache.org>> wrote:
> >>
> >> Thanks Marc for the effort!
> >>
> >>
> >> On 12/11/2016 11:54 AM, Marc Spehlmann wrote:
> >>> Hey, we have a jekyll blog and a first blog article now! It can be
> viewed
> >>>
> >>> here http://apache.github.io/incubator-quickstep/ <
> http://apache.github.io/incubator-quickstep/>
> >>>
> >>> It's a page automatically generated by github. We can probably change
> the
> >>> URL somehow, not sure off hand though.
> >>>
> >>> Editting instructions are included in the readme here
> >>>
> >>> https://github.com/apache/incubator-quickstep/tree/gh-pages <
> https://github.com/apache/incubator-quickstep/tree/gh-pages>
> >>>
> >>> If anyone wants to touch up the css or layout, have at it. I'm no web
> >>> design expert, I rely on the pre-built themes.
> >>>
> >>> Anyone can write a post, all you need to know is markdown.
> >>>
> >>> Happy blogging!
> >>>
> >>
> >
>
>
Re: blog
Posted by Julian Hyde <jh...@apache.org>.
By the way, I think for now publishing to GitHub.io is just fine. The blog post is great — content like this is great outreach.
Speaking of outreach, the ApacheQuickstep twitter account has been very quiet. How about tweeting a link to the blog post? I think you could find a couple of newsworthy events every week to tweet about.
Julian
> On Dec 11, 2016, at 2:40 PM, Julian Hyde <jh...@apache.org> wrote:
>
> I’m a fan of Jekyll too. Note that you can use the same markup to write pages and then deploy them to Apache. In fact Calcite’s web site does exactly that[1]. You need to install Jekyll but that isn’t too difficult.
>
> Julian
>
> [1] https://github.com/apache/calcite/blob/master/site/README.md <https://github.com/apache/calcite/blob/master/site/README.md>
>
>> On Dec 11, 2016, at 12:36 PM, Hakan Memisoglu <hakanmemisoglu@apache.org <ma...@apache.org>> wrote:
>>
>> Thanks Marc for the effort!
>>
>>
>> On 12/11/2016 11:54 AM, Marc Spehlmann wrote:
>>> Hey, we have a jekyll blog and a first blog article now! It can be viewed
>>>
>>> here http://apache.github.io/incubator-quickstep/ <http://apache.github.io/incubator-quickstep/>
>>>
>>> It's a page automatically generated by github. We can probably change the
>>> URL somehow, not sure off hand though.
>>>
>>> Editting instructions are included in the readme here
>>>
>>> https://github.com/apache/incubator-quickstep/tree/gh-pages <https://github.com/apache/incubator-quickstep/tree/gh-pages>
>>>
>>> If anyone wants to touch up the css or layout, have at it. I'm no web
>>> design expert, I rely on the pre-built themes.
>>>
>>> Anyone can write a post, all you need to know is markdown.
>>>
>>> Happy blogging!
>>>
>>
>
Re: blog
Posted by Julian Hyde <jh...@apache.org>.
I’m a fan of Jekyll too. Note that you can use the same markup to write pages and then deploy them to Apache. In fact Calcite’s web site does exactly that[1]. You need to install Jekyll but that isn’t too difficult.
Julian
[1] https://github.com/apache/calcite/blob/master/site/README.md <https://github.com/apache/calcite/blob/master/site/README.md>
> On Dec 11, 2016, at 12:36 PM, Hakan Memisoglu <ha...@apache.org> wrote:
>
> Thanks Marc for the effort!
>
>
> On 12/11/2016 11:54 AM, Marc Spehlmann wrote:
>> Hey, we have a jekyll blog and a first blog article now! It can be viewed
>>
>> here http://apache.github.io/incubator-quickstep/
>>
>> It's a page automatically generated by github. We can probably change the
>> URL somehow, not sure off hand though.
>>
>> Editting instructions are included in the readme here
>>
>> https://github.com/apache/incubator-quickstep/tree/gh-pages
>>
>> If anyone wants to touch up the css or layout, have at it. I'm no web
>> design expert, I rely on the pre-built themes.
>>
>> Anyone can write a post, all you need to know is markdown.
>>
>> Happy blogging!
>>
>
Re: blog
Posted by Hakan Memisoglu <ha...@apache.org>.
Thanks Marc for the effort!
On 12/11/2016 11:54 AM, Marc Spehlmann wrote:
> Hey, we have a jekyll blog and a first blog article now! It can be viewed
>
> here http://apache.github.io/incubator-quickstep/
>
> It's a page automatically generated by github. We can probably change the
> URL somehow, not sure off hand though.
>
> Editting instructions are included in the readme here
>
> https://github.com/apache/incubator-quickstep/tree/gh-pages
>
> If anyone wants to touch up the css or layout, have at it. I'm no web
> design expert, I rely on the pre-built themes.
>
> Anyone can write a post, all you need to know is markdown.
>
> Happy blogging!
>
Re: blog
Posted by Marc Spehlmann <sp...@gmail.com>.
Fixed - I followed the asterixdb guys are doing and committed the compiled
site, building it in the content directory.
On Tue, Dec 13, 2016 at 11:27 AM, Julian Hyde <jh...@apache.org> wrote:
> Correct. The site (and the publishing process) don't do anything clever.
>
> On Tue, Dec 13, 2016 at 8:39 AM, Marc Spehlmann <sp...@gmail.com>
> wrote:
> > Whoops, looks like the content was pushed OK, but the mechanism which is
> > supposed to trigger Jekyll compilation was not tripped- we just see a
> > directory listing when going to http://quickstep.apache.org/.
> >
> > Possibly the automatic jekyll publishing isn't built into this framework.
> > The instructions for https://github.com/apache/calcite/tree/master/site
> > suggest that the site must be compiled locally and then pushed into the
> > pubsub svn repo.
> >
> > If that's the case, then maybe we will have to compile the jekyll files
> > locally and push them along with the markdown/config/scss/etc
> >
> > On Tue, Dec 13, 2016 at 10:10 AM, Marc Spehlmann <spehl.apache@gmail.com
> >
> > wrote:
> >
> >> Harshad pointed out the directory is
> >> https://git-wip-us.apache.org/repos/asf?p=incubator-quickstep-site.git
> >>
> >> He found it by modifying the address found in
> >> https://cwiki.apache.org/confluence/display/QUICKSTEP/
> >> Workflow+For+Committers
> >>
> >> On Tue, Dec 13, 2016 at 10:02 AM, Marc Spehlmann <
> spehl.apache@gmail.com>
> >> wrote:
> >>
> >>> Thanks for looking into that! I actually took the majority of the
> written
> >>> content from the old website and converted it into markdown to create
> the
> >>> content for the new site, so I think we can keep the structure as
> Jekyll
> >>> has automatically made it. Once we get some more posts, we might want
> to
> >>> move to a separate /blog directory for the posts and have it paginate
> the
> >>> blog index- that's not too hard to do, but unneeded right now.
> >>>
> >>> One question about the quickstep-site repo...
> >>>
> >>> Any idea how to get access? Or will I need to submit a pull request?
> >>>
> >>> cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git remote -v
> >>> origin https://github.com/cramja/incubator-quickstep-site.git (fetch)
> >>> origin https://github.com/cramja/incubator-quickstep-site.git (push)
> >>> source https://github.com/apache/incubator-quickstep-site (fetch)
> >>> source https://github.com/apache/incubator-quickstep-site (push)
> >>> cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git push source
> >>> remote: Permission to apache/incubator-quickstep-site.git denied to
> >>> cramja.
> >>> fatal: unable to access 'https://github.com/apache/inc
> >>> ubator-quickstep-site/': The requested URL returned error: 403
> >>>
> >>> On Mon, Dec 12, 2016 at 5:24 PM, Roman Shaposhnik <
> roman@shaposhnik.org>
> >>> wrote:
> >>>
> >>>> Yes. But note you have to push to a branch called asf-site.
> >>>>
> >>>> Thanks,
> >>>> Roman.
> >>>>
> >>>> On Mon, Dec 12, 2016 at 1:14 PM, Julian Hyde <jh...@apache.org>
> wrote:
> >>>> > INFRA tell me that Quickstep is already using gitpubsub. So, if you
> >>>> push to https://github.com/apache/incubator-quickstep-site <
> >>>> https://github.com/apache/incubator-quickstep-site> it will
> >>>> automatically appear at http://quickstep.apache.org/ <
> >>>> http://quickstep.apache.org/>.
> >>>> >
> >>>> > I think you should consider merging the content you just created
> into
> >>>> that site (maybe under http://quickstep.apache.org/blog <
> >>>> http://quickstep.apache.org/blog> ?), and them turn off
> apache.github.io.
> >>>> I can help with the Jekyll if you can’t figure it out.
> >>>> >
> >>>> > Julian
> >>>> >
> >>>> >
> >>>> >
> >>>> >> On Dec 12, 2016, at 10:58 AM, Julian Hyde <jh...@apache.org>
> wrote:
> >>>> >>
> >>>> >> I got part way through the process and logged
> >>>> https://issues.apache.org/jira/browse/INFRA-13079 <
> >>>> https://issues.apache.org/jira/browse/INFRA-13079> for the rest.
> Please
> >>>> watch that case if you want to be updated.
> >>>> >>
> >>>> >>> On Dec 12, 2016, at 10:38 AM, Julian Hyde <jhyde@apache.org
> <mailto:
> >>>> jhyde@apache.org>> wrote:
> >>>> >>>
> >>>> >>> The SVN URL should be https://svn.apache.org/repos/a
> >>>> sf/incubator/quickstep/site/ <https://svn.apache.org/repos/
> >>>> asf/incubator/quickstep/site/> (see for instance
> >>>> https://svn.apache.org/repos/asf/incubator/tephra/site/ <
> >>>> https://svn.apache.org/repos/asf/incubator/tephra/site/>) but doesn’t
> >>>> exist currently.
> >>>> >>>
> >>>> >>> Per http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Re
> >>>> pository <http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+R
> >>>> epository> I think this means I need to create the repository and
> >>>> authorize committers. (Don’t worry, Quickstep will continue to use
> git for
> >>>> its source code, and for the source of the web site; SVN is just for
> the
> >>>> generated web site.)
> >>>> >>>
> >>>> >>> And I think we need to tell INFRA to enable svnpubsub. I don’t
> >>>> recall how to do that, and I can’t find online doc. Any mentors know?
> >>>> >>>
> >>>> >>> Julian
> >>>> >>>
> >>>> >>>
> >>>> >>>> On Dec 12, 2016, at 9:56 AM, Marc Spehlmann <
> spehl.apache@gmail.com
> >>>> <ma...@gmail.com>> wrote:
> >>>> >>>>
> >>>> >>>> SVN pubsub sounds simple enough... but I cannot seem to find the
> >>>> url for
> >>>> >>>> quickstep.
> >>>> >>>>
> >>>> >>>> I tried
> >>>> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
> >>>> https://svn.apache.org/repos/asf/quickstep> target
> >>>> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
> >>>> https://svn.apache.org/repos/asf/quickstep> target
> >>>> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep <
> >>>> https://svn.apache.org/repos/asf/incubator-quickstep> target
> >>>> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep/site
> <
> >>>> https://svn.apache.org/repos/asf/incubator-quickstep/site> target
> >>>> >>>> __
> >>>> >>>> svn: E170000: URL 'https://svn.apache.org/[ <
> >>>> https://svn.apache.org/[>...]' doesn't exist
> >>>> >>>>
> >>>> >>>> On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <
> >>>> jmp.quickstep@gmail.com <ma...@gmail.com>>
> >>>> >>>> wrote:
> >>>> >>>>
> >>>> >>>>> Nice. Thanks Marc!
> >>>> >>>>>
> >>>> >>>>> On 12/11/16, 11:54 AM, "Marc Spehlmann" <spehl.apache@gmail.com
> >>>> <ma...@gmail.com>> wrote:
> >>>> >>>>>
> >>>> >>>>> Hey, we have a jekyll blog and a first blog article now! It
> can
> >>>> be
> >>>> >>>>> viewed
> >>>> >>>>>
> >>>> >>>>> here http://apache.github.io/incubator-quickstep/ <
> >>>> http://apache.github.io/incubator-quickstep/>
> >>>> >>>>>
> >>>> >>>>> It's a page automatically generated by github. We can
> probably
> >>>> change
> >>>> >>>>> the
> >>>> >>>>> URL somehow, not sure off hand though.
> >>>> >>>>>
> >>>> >>>>> Editting instructions are included in the readme here
> >>>> >>>>>
> >>>> >>>>> https://github.com/apache/incubator-quickstep/tree/gh-pages
> <
> >>>> https://github.com/apache/incubator-quickstep/tree/gh-pages>
> >>>> >>>>>
> >>>> >>>>> If anyone wants to touch up the css or layout, have at it.
> I'm
> >>>> no web
> >>>> >>>>> design expert, I rely on the pre-built themes.
> >>>> >>>>>
> >>>> >>>>> Anyone can write a post, all you need to know is markdown.
> >>>> >>>>>
> >>>> >>>>> Happy blogging!
> >>>> >>>>>
> >>>> >>>>>
> >>>> >>>>>
> >>>> >>>>>
> >>>> >>>
> >>>> >>
> >>>> >
> >>>>
> >>>
> >>>
> >>
>
Re: blog
Posted by Julian Hyde <jh...@apache.org>.
Correct. The site (and the publishing process) don't do anything clever.
On Tue, Dec 13, 2016 at 8:39 AM, Marc Spehlmann <sp...@gmail.com> wrote:
> Whoops, looks like the content was pushed OK, but the mechanism which is
> supposed to trigger Jekyll compilation was not tripped- we just see a
> directory listing when going to http://quickstep.apache.org/.
>
> Possibly the automatic jekyll publishing isn't built into this framework.
> The instructions for https://github.com/apache/calcite/tree/master/site
> suggest that the site must be compiled locally and then pushed into the
> pubsub svn repo.
>
> If that's the case, then maybe we will have to compile the jekyll files
> locally and push them along with the markdown/config/scss/etc
>
> On Tue, Dec 13, 2016 at 10:10 AM, Marc Spehlmann <sp...@gmail.com>
> wrote:
>
>> Harshad pointed out the directory is
>> https://git-wip-us.apache.org/repos/asf?p=incubator-quickstep-site.git
>>
>> He found it by modifying the address found in
>> https://cwiki.apache.org/confluence/display/QUICKSTEP/
>> Workflow+For+Committers
>>
>> On Tue, Dec 13, 2016 at 10:02 AM, Marc Spehlmann <sp...@gmail.com>
>> wrote:
>>
>>> Thanks for looking into that! I actually took the majority of the written
>>> content from the old website and converted it into markdown to create the
>>> content for the new site, so I think we can keep the structure as Jekyll
>>> has automatically made it. Once we get some more posts, we might want to
>>> move to a separate /blog directory for the posts and have it paginate the
>>> blog index- that's not too hard to do, but unneeded right now.
>>>
>>> One question about the quickstep-site repo...
>>>
>>> Any idea how to get access? Or will I need to submit a pull request?
>>>
>>> cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git remote -v
>>> origin https://github.com/cramja/incubator-quickstep-site.git (fetch)
>>> origin https://github.com/cramja/incubator-quickstep-site.git (push)
>>> source https://github.com/apache/incubator-quickstep-site (fetch)
>>> source https://github.com/apache/incubator-quickstep-site (push)
>>> cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git push source
>>> remote: Permission to apache/incubator-quickstep-site.git denied to
>>> cramja.
>>> fatal: unable to access 'https://github.com/apache/inc
>>> ubator-quickstep-site/': The requested URL returned error: 403
>>>
>>> On Mon, Dec 12, 2016 at 5:24 PM, Roman Shaposhnik <ro...@shaposhnik.org>
>>> wrote:
>>>
>>>> Yes. But note you have to push to a branch called asf-site.
>>>>
>>>> Thanks,
>>>> Roman.
>>>>
>>>> On Mon, Dec 12, 2016 at 1:14 PM, Julian Hyde <jh...@apache.org> wrote:
>>>> > INFRA tell me that Quickstep is already using gitpubsub. So, if you
>>>> push to https://github.com/apache/incubator-quickstep-site <
>>>> https://github.com/apache/incubator-quickstep-site> it will
>>>> automatically appear at http://quickstep.apache.org/ <
>>>> http://quickstep.apache.org/>.
>>>> >
>>>> > I think you should consider merging the content you just created into
>>>> that site (maybe under http://quickstep.apache.org/blog <
>>>> http://quickstep.apache.org/blog> ?), and them turn off apache.github.io.
>>>> I can help with the Jekyll if you can’t figure it out.
>>>> >
>>>> > Julian
>>>> >
>>>> >
>>>> >
>>>> >> On Dec 12, 2016, at 10:58 AM, Julian Hyde <jh...@apache.org> wrote:
>>>> >>
>>>> >> I got part way through the process and logged
>>>> https://issues.apache.org/jira/browse/INFRA-13079 <
>>>> https://issues.apache.org/jira/browse/INFRA-13079> for the rest. Please
>>>> watch that case if you want to be updated.
>>>> >>
>>>> >>> On Dec 12, 2016, at 10:38 AM, Julian Hyde <jhyde@apache.org <mailto:
>>>> jhyde@apache.org>> wrote:
>>>> >>>
>>>> >>> The SVN URL should be https://svn.apache.org/repos/a
>>>> sf/incubator/quickstep/site/ <https://svn.apache.org/repos/
>>>> asf/incubator/quickstep/site/> (see for instance
>>>> https://svn.apache.org/repos/asf/incubator/tephra/site/ <
>>>> https://svn.apache.org/repos/asf/incubator/tephra/site/>) but doesn’t
>>>> exist currently.
>>>> >>>
>>>> >>> Per http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Re
>>>> pository <http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+R
>>>> epository> I think this means I need to create the repository and
>>>> authorize committers. (Don’t worry, Quickstep will continue to use git for
>>>> its source code, and for the source of the web site; SVN is just for the
>>>> generated web site.)
>>>> >>>
>>>> >>> And I think we need to tell INFRA to enable svnpubsub. I don’t
>>>> recall how to do that, and I can’t find online doc. Any mentors know?
>>>> >>>
>>>> >>> Julian
>>>> >>>
>>>> >>>
>>>> >>>> On Dec 12, 2016, at 9:56 AM, Marc Spehlmann <spehl.apache@gmail.com
>>>> <ma...@gmail.com>> wrote:
>>>> >>>>
>>>> >>>> SVN pubsub sounds simple enough... but I cannot seem to find the
>>>> url for
>>>> >>>> quickstep.
>>>> >>>>
>>>> >>>> I tried
>>>> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
>>>> https://svn.apache.org/repos/asf/quickstep> target
>>>> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
>>>> https://svn.apache.org/repos/asf/quickstep> target
>>>> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep <
>>>> https://svn.apache.org/repos/asf/incubator-quickstep> target
>>>> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep/site <
>>>> https://svn.apache.org/repos/asf/incubator-quickstep/site> target
>>>> >>>> __
>>>> >>>> svn: E170000: URL 'https://svn.apache.org/[ <
>>>> https://svn.apache.org/[>...]' doesn't exist
>>>> >>>>
>>>> >>>> On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <
>>>> jmp.quickstep@gmail.com <ma...@gmail.com>>
>>>> >>>> wrote:
>>>> >>>>
>>>> >>>>> Nice. Thanks Marc!
>>>> >>>>>
>>>> >>>>> On 12/11/16, 11:54 AM, "Marc Spehlmann" <spehl.apache@gmail.com
>>>> <ma...@gmail.com>> wrote:
>>>> >>>>>
>>>> >>>>> Hey, we have a jekyll blog and a first blog article now! It can
>>>> be
>>>> >>>>> viewed
>>>> >>>>>
>>>> >>>>> here http://apache.github.io/incubator-quickstep/ <
>>>> http://apache.github.io/incubator-quickstep/>
>>>> >>>>>
>>>> >>>>> It's a page automatically generated by github. We can probably
>>>> change
>>>> >>>>> the
>>>> >>>>> URL somehow, not sure off hand though.
>>>> >>>>>
>>>> >>>>> Editting instructions are included in the readme here
>>>> >>>>>
>>>> >>>>> https://github.com/apache/incubator-quickstep/tree/gh-pages <
>>>> https://github.com/apache/incubator-quickstep/tree/gh-pages>
>>>> >>>>>
>>>> >>>>> If anyone wants to touch up the css or layout, have at it. I'm
>>>> no web
>>>> >>>>> design expert, I rely on the pre-built themes.
>>>> >>>>>
>>>> >>>>> Anyone can write a post, all you need to know is markdown.
>>>> >>>>>
>>>> >>>>> Happy blogging!
>>>> >>>>>
>>>> >>>>>
>>>> >>>>>
>>>> >>>>>
>>>> >>>
>>>> >>
>>>> >
>>>>
>>>
>>>
>>
Re: blog
Posted by Marc Spehlmann <sp...@gmail.com>.
Whoops, looks like the content was pushed OK, but the mechanism which is
supposed to trigger Jekyll compilation was not tripped- we just see a
directory listing when going to http://quickstep.apache.org/.
Possibly the automatic jekyll publishing isn't built into this framework.
The instructions for https://github.com/apache/calcite/tree/master/site
suggest that the site must be compiled locally and then pushed into the
pubsub svn repo.
If that's the case, then maybe we will have to compile the jekyll files
locally and push them along with the markdown/config/scss/etc
On Tue, Dec 13, 2016 at 10:10 AM, Marc Spehlmann <sp...@gmail.com>
wrote:
> Harshad pointed out the directory is
> https://git-wip-us.apache.org/repos/asf?p=incubator-quickstep-site.git
>
> He found it by modifying the address found in
> https://cwiki.apache.org/confluence/display/QUICKSTEP/
> Workflow+For+Committers
>
> On Tue, Dec 13, 2016 at 10:02 AM, Marc Spehlmann <sp...@gmail.com>
> wrote:
>
>> Thanks for looking into that! I actually took the majority of the written
>> content from the old website and converted it into markdown to create the
>> content for the new site, so I think we can keep the structure as Jekyll
>> has automatically made it. Once we get some more posts, we might want to
>> move to a separate /blog directory for the posts and have it paginate the
>> blog index- that's not too hard to do, but unneeded right now.
>>
>> One question about the quickstep-site repo...
>>
>> Any idea how to get access? Or will I need to submit a pull request?
>>
>> cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git remote -v
>> origin https://github.com/cramja/incubator-quickstep-site.git (fetch)
>> origin https://github.com/cramja/incubator-quickstep-site.git (push)
>> source https://github.com/apache/incubator-quickstep-site (fetch)
>> source https://github.com/apache/incubator-quickstep-site (push)
>> cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git push source
>> remote: Permission to apache/incubator-quickstep-site.git denied to
>> cramja.
>> fatal: unable to access 'https://github.com/apache/inc
>> ubator-quickstep-site/': The requested URL returned error: 403
>>
>> On Mon, Dec 12, 2016 at 5:24 PM, Roman Shaposhnik <ro...@shaposhnik.org>
>> wrote:
>>
>>> Yes. But note you have to push to a branch called asf-site.
>>>
>>> Thanks,
>>> Roman.
>>>
>>> On Mon, Dec 12, 2016 at 1:14 PM, Julian Hyde <jh...@apache.org> wrote:
>>> > INFRA tell me that Quickstep is already using gitpubsub. So, if you
>>> push to https://github.com/apache/incubator-quickstep-site <
>>> https://github.com/apache/incubator-quickstep-site> it will
>>> automatically appear at http://quickstep.apache.org/ <
>>> http://quickstep.apache.org/>.
>>> >
>>> > I think you should consider merging the content you just created into
>>> that site (maybe under http://quickstep.apache.org/blog <
>>> http://quickstep.apache.org/blog> ?), and them turn off apache.github.io.
>>> I can help with the Jekyll if you can’t figure it out.
>>> >
>>> > Julian
>>> >
>>> >
>>> >
>>> >> On Dec 12, 2016, at 10:58 AM, Julian Hyde <jh...@apache.org> wrote:
>>> >>
>>> >> I got part way through the process and logged
>>> https://issues.apache.org/jira/browse/INFRA-13079 <
>>> https://issues.apache.org/jira/browse/INFRA-13079> for the rest. Please
>>> watch that case if you want to be updated.
>>> >>
>>> >>> On Dec 12, 2016, at 10:38 AM, Julian Hyde <jhyde@apache.org <mailto:
>>> jhyde@apache.org>> wrote:
>>> >>>
>>> >>> The SVN URL should be https://svn.apache.org/repos/a
>>> sf/incubator/quickstep/site/ <https://svn.apache.org/repos/
>>> asf/incubator/quickstep/site/> (see for instance
>>> https://svn.apache.org/repos/asf/incubator/tephra/site/ <
>>> https://svn.apache.org/repos/asf/incubator/tephra/site/>) but doesn’t
>>> exist currently.
>>> >>>
>>> >>> Per http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Re
>>> pository <http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+R
>>> epository> I think this means I need to create the repository and
>>> authorize committers. (Don’t worry, Quickstep will continue to use git for
>>> its source code, and for the source of the web site; SVN is just for the
>>> generated web site.)
>>> >>>
>>> >>> And I think we need to tell INFRA to enable svnpubsub. I don’t
>>> recall how to do that, and I can’t find online doc. Any mentors know?
>>> >>>
>>> >>> Julian
>>> >>>
>>> >>>
>>> >>>> On Dec 12, 2016, at 9:56 AM, Marc Spehlmann <spehl.apache@gmail.com
>>> <ma...@gmail.com>> wrote:
>>> >>>>
>>> >>>> SVN pubsub sounds simple enough... but I cannot seem to find the
>>> url for
>>> >>>> quickstep.
>>> >>>>
>>> >>>> I tried
>>> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
>>> https://svn.apache.org/repos/asf/quickstep> target
>>> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
>>> https://svn.apache.org/repos/asf/quickstep> target
>>> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep <
>>> https://svn.apache.org/repos/asf/incubator-quickstep> target
>>> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep/site <
>>> https://svn.apache.org/repos/asf/incubator-quickstep/site> target
>>> >>>> __
>>> >>>> svn: E170000: URL 'https://svn.apache.org/[ <
>>> https://svn.apache.org/[>...]' doesn't exist
>>> >>>>
>>> >>>> On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <
>>> jmp.quickstep@gmail.com <ma...@gmail.com>>
>>> >>>> wrote:
>>> >>>>
>>> >>>>> Nice. Thanks Marc!
>>> >>>>>
>>> >>>>> On 12/11/16, 11:54 AM, "Marc Spehlmann" <spehl.apache@gmail.com
>>> <ma...@gmail.com>> wrote:
>>> >>>>>
>>> >>>>> Hey, we have a jekyll blog and a first blog article now! It can
>>> be
>>> >>>>> viewed
>>> >>>>>
>>> >>>>> here http://apache.github.io/incubator-quickstep/ <
>>> http://apache.github.io/incubator-quickstep/>
>>> >>>>>
>>> >>>>> It's a page automatically generated by github. We can probably
>>> change
>>> >>>>> the
>>> >>>>> URL somehow, not sure off hand though.
>>> >>>>>
>>> >>>>> Editting instructions are included in the readme here
>>> >>>>>
>>> >>>>> https://github.com/apache/incubator-quickstep/tree/gh-pages <
>>> https://github.com/apache/incubator-quickstep/tree/gh-pages>
>>> >>>>>
>>> >>>>> If anyone wants to touch up the css or layout, have at it. I'm
>>> no web
>>> >>>>> design expert, I rely on the pre-built themes.
>>> >>>>>
>>> >>>>> Anyone can write a post, all you need to know is markdown.
>>> >>>>>
>>> >>>>> Happy blogging!
>>> >>>>>
>>> >>>>>
>>> >>>>>
>>> >>>>>
>>> >>>
>>> >>
>>> >
>>>
>>
>>
>
Re: blog
Posted by Marc Spehlmann <sp...@gmail.com>.
Harshad pointed out the directory is
https://git-wip-us.apache.org/repos/asf?p=incubator-quickstep-site.git
He found it by modifying the address found in
https://cwiki.apache.org/confluence/display/QUICKSTEP/Workflow+For+Committers
On Tue, Dec 13, 2016 at 10:02 AM, Marc Spehlmann <sp...@gmail.com>
wrote:
> Thanks for looking into that! I actually took the majority of the written
> content from the old website and converted it into markdown to create the
> content for the new site, so I think we can keep the structure as Jekyll
> has automatically made it. Once we get some more posts, we might want to
> move to a separate /blog directory for the posts and have it paginate the
> blog index- that's not too hard to do, but unneeded right now.
>
> One question about the quickstep-site repo...
>
> Any idea how to get access? Or will I need to submit a pull request?
>
> cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git remote -v
> origin https://github.com/cramja/incubator-quickstep-site.git (fetch)
> origin https://github.com/cramja/incubator-quickstep-site.git (push)
> source https://github.com/apache/incubator-quickstep-site (fetch)
> source https://github.com/apache/incubator-quickstep-site (push)
> cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git push source
> remote: Permission to apache/incubator-quickstep-site.git denied to
> cramja.
> fatal: unable to access 'https://github.com/apache/
> incubator-quickstep-site/': The requested URL returned error: 403
>
> On Mon, Dec 12, 2016 at 5:24 PM, Roman Shaposhnik <ro...@shaposhnik.org>
> wrote:
>
>> Yes. But note you have to push to a branch called asf-site.
>>
>> Thanks,
>> Roman.
>>
>> On Mon, Dec 12, 2016 at 1:14 PM, Julian Hyde <jh...@apache.org> wrote:
>> > INFRA tell me that Quickstep is already using gitpubsub. So, if you
>> push to https://github.com/apache/incubator-quickstep-site <
>> https://github.com/apache/incubator-quickstep-site> it will
>> automatically appear at http://quickstep.apache.org/ <
>> http://quickstep.apache.org/>.
>> >
>> > I think you should consider merging the content you just created into
>> that site (maybe under http://quickstep.apache.org/blog <
>> http://quickstep.apache.org/blog> ?), and them turn off apache.github.io.
>> I can help with the Jekyll if you can’t figure it out.
>> >
>> > Julian
>> >
>> >
>> >
>> >> On Dec 12, 2016, at 10:58 AM, Julian Hyde <jh...@apache.org> wrote:
>> >>
>> >> I got part way through the process and logged
>> https://issues.apache.org/jira/browse/INFRA-13079 <
>> https://issues.apache.org/jira/browse/INFRA-13079> for the rest. Please
>> watch that case if you want to be updated.
>> >>
>> >>> On Dec 12, 2016, at 10:38 AM, Julian Hyde <jhyde@apache.org <mailto:
>> jhyde@apache.org>> wrote:
>> >>>
>> >>> The SVN URL should be https://svn.apache.org/repos/a
>> sf/incubator/quickstep/site/ <https://svn.apache.org/repos/
>> asf/incubator/quickstep/site/> (see for instance
>> https://svn.apache.org/repos/asf/incubator/tephra/site/ <
>> https://svn.apache.org/repos/asf/incubator/tephra/site/>) but doesn’t
>> exist currently.
>> >>>
>> >>> Per http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Re
>> pository <http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+R
>> epository> I think this means I need to create the repository and
>> authorize committers. (Don’t worry, Quickstep will continue to use git for
>> its source code, and for the source of the web site; SVN is just for the
>> generated web site.)
>> >>>
>> >>> And I think we need to tell INFRA to enable svnpubsub. I don’t recall
>> how to do that, and I can’t find online doc. Any mentors know?
>> >>>
>> >>> Julian
>> >>>
>> >>>
>> >>>> On Dec 12, 2016, at 9:56 AM, Marc Spehlmann <spehl.apache@gmail.com
>> <ma...@gmail.com>> wrote:
>> >>>>
>> >>>> SVN pubsub sounds simple enough... but I cannot seem to find the url
>> for
>> >>>> quickstep.
>> >>>>
>> >>>> I tried
>> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
>> https://svn.apache.org/repos/asf/quickstep> target
>> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
>> https://svn.apache.org/repos/asf/quickstep> target
>> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep <
>> https://svn.apache.org/repos/asf/incubator-quickstep> target
>> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep/site <
>> https://svn.apache.org/repos/asf/incubator-quickstep/site> target
>> >>>> __
>> >>>> svn: E170000: URL 'https://svn.apache.org/[ <
>> https://svn.apache.org/[>...]' doesn't exist
>> >>>>
>> >>>> On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <
>> jmp.quickstep@gmail.com <ma...@gmail.com>>
>> >>>> wrote:
>> >>>>
>> >>>>> Nice. Thanks Marc!
>> >>>>>
>> >>>>> On 12/11/16, 11:54 AM, "Marc Spehlmann" <spehl.apache@gmail.com
>> <ma...@gmail.com>> wrote:
>> >>>>>
>> >>>>> Hey, we have a jekyll blog and a first blog article now! It can
>> be
>> >>>>> viewed
>> >>>>>
>> >>>>> here http://apache.github.io/incubator-quickstep/ <
>> http://apache.github.io/incubator-quickstep/>
>> >>>>>
>> >>>>> It's a page automatically generated by github. We can probably
>> change
>> >>>>> the
>> >>>>> URL somehow, not sure off hand though.
>> >>>>>
>> >>>>> Editting instructions are included in the readme here
>> >>>>>
>> >>>>> https://github.com/apache/incubator-quickstep/tree/gh-pages <
>> https://github.com/apache/incubator-quickstep/tree/gh-pages>
>> >>>>>
>> >>>>> If anyone wants to touch up the css or layout, have at it. I'm
>> no web
>> >>>>> design expert, I rely on the pre-built themes.
>> >>>>>
>> >>>>> Anyone can write a post, all you need to know is markdown.
>> >>>>>
>> >>>>> Happy blogging!
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>
>> >>
>> >
>>
>
>
Re: blog
Posted by Marc Spehlmann <sp...@gmail.com>.
Thanks for looking into that! I actually took the majority of the written
content from the old website and converted it into markdown to create the
content for the new site, so I think we can keep the structure as Jekyll
has automatically made it. Once we get some more posts, we might want to
move to a separate /blog directory for the posts and have it paginate the
blog index- that's not too hard to do, but unneeded right now.
One question about the quickstep-site repo...
Any idea how to get access? Or will I need to submit a pull request?
cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git remote -v
origin https://github.com/cramja/incubator-quickstep-site.git (fetch)
origin https://github.com/cramja/incubator-quickstep-site.git (push)
source https://github.com/apache/incubator-quickstep-site (fetch)
source https://github.com/apache/incubator-quickstep-site (push)
cramja@wifi-780 ~/workspace/incubator-quickstep-site $ git push source
remote: Permission to apache/incubator-quickstep-site.git denied to cramja.
fatal: unable to access 'https://github.com/apache/incubator-quickstep-site/':
The requested URL returned error: 403
On Mon, Dec 12, 2016 at 5:24 PM, Roman Shaposhnik <ro...@shaposhnik.org>
wrote:
> Yes. But note you have to push to a branch called asf-site.
>
> Thanks,
> Roman.
>
> On Mon, Dec 12, 2016 at 1:14 PM, Julian Hyde <jh...@apache.org> wrote:
> > INFRA tell me that Quickstep is already using gitpubsub. So, if you push
> to https://github.com/apache/incubator-quickstep-site <
> https://github.com/apache/incubator-quickstep-site> it will automatically
> appear at http://quickstep.apache.org/ <http://quickstep.apache.org/>.
> >
> > I think you should consider merging the content you just created into
> that site (maybe under http://quickstep.apache.org/blog <
> http://quickstep.apache.org/blog> ?), and them turn off apache.github.io.
> I can help with the Jekyll if you can’t figure it out.
> >
> > Julian
> >
> >
> >
> >> On Dec 12, 2016, at 10:58 AM, Julian Hyde <jh...@apache.org> wrote:
> >>
> >> I got part way through the process and logged
> https://issues.apache.org/jira/browse/INFRA-13079 <
> https://issues.apache.org/jira/browse/INFRA-13079> for the rest. Please
> watch that case if you want to be updated.
> >>
> >>> On Dec 12, 2016, at 10:38 AM, Julian Hyde <jhyde@apache.org <mailto:
> jhyde@apache.org>> wrote:
> >>>
> >>> The SVN URL should be https://svn.apache.org/repos/
> asf/incubator/quickstep/site/ <https://svn.apache.org/repos/
> asf/incubator/quickstep/site/> (see for instance
> https://svn.apache.org/repos/asf/incubator/tephra/site/ <
> https://svn.apache.org/repos/asf/incubator/tephra/site/>) but doesn’t
> exist currently.
> >>>
> >>> Per http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+
> Repository <http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+
> Repository> I think this means I need to create the repository and
> authorize committers. (Don’t worry, Quickstep will continue to use git for
> its source code, and for the source of the web site; SVN is just for the
> generated web site.)
> >>>
> >>> And I think we need to tell INFRA to enable svnpubsub. I don’t recall
> how to do that, and I can’t find online doc. Any mentors know?
> >>>
> >>> Julian
> >>>
> >>>
> >>>> On Dec 12, 2016, at 9:56 AM, Marc Spehlmann <spehl.apache@gmail.com
> <ma...@gmail.com>> wrote:
> >>>>
> >>>> SVN pubsub sounds simple enough... but I cannot seem to find the url
> for
> >>>> quickstep.
> >>>>
> >>>> I tried
> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
> https://svn.apache.org/repos/asf/quickstep> target
> >>>> svn co https://svn.apache.org/repos/asf/quickstep <
> https://svn.apache.org/repos/asf/quickstep> target
> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep <
> https://svn.apache.org/repos/asf/incubator-quickstep> target
> >>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep/site <
> https://svn.apache.org/repos/asf/incubator-quickstep/site> target
> >>>> __
> >>>> svn: E170000: URL 'https://svn.apache.org/[ <https://svn.apache.org/[
> >...]' doesn't exist
> >>>>
> >>>> On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <
> jmp.quickstep@gmail.com <ma...@gmail.com>>
> >>>> wrote:
> >>>>
> >>>>> Nice. Thanks Marc!
> >>>>>
> >>>>> On 12/11/16, 11:54 AM, "Marc Spehlmann" <spehl.apache@gmail.com
> <ma...@gmail.com>> wrote:
> >>>>>
> >>>>> Hey, we have a jekyll blog and a first blog article now! It can be
> >>>>> viewed
> >>>>>
> >>>>> here http://apache.github.io/incubator-quickstep/ <
> http://apache.github.io/incubator-quickstep/>
> >>>>>
> >>>>> It's a page automatically generated by github. We can probably
> change
> >>>>> the
> >>>>> URL somehow, not sure off hand though.
> >>>>>
> >>>>> Editting instructions are included in the readme here
> >>>>>
> >>>>> https://github.com/apache/incubator-quickstep/tree/gh-pages <
> https://github.com/apache/incubator-quickstep/tree/gh-pages>
> >>>>>
> >>>>> If anyone wants to touch up the css or layout, have at it. I'm no
> web
> >>>>> design expert, I rely on the pre-built themes.
> >>>>>
> >>>>> Anyone can write a post, all you need to know is markdown.
> >>>>>
> >>>>> Happy blogging!
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>
> >>
> >
>
Re: blog
Posted by Roman Shaposhnik <ro...@shaposhnik.org>.
Yes. But note you have to push to a branch called asf-site.
Thanks,
Roman.
On Mon, Dec 12, 2016 at 1:14 PM, Julian Hyde <jh...@apache.org> wrote:
> INFRA tell me that Quickstep is already using gitpubsub. So, if you push to https://github.com/apache/incubator-quickstep-site <https://github.com/apache/incubator-quickstep-site> it will automatically appear at http://quickstep.apache.org/ <http://quickstep.apache.org/>.
>
> I think you should consider merging the content you just created into that site (maybe under http://quickstep.apache.org/blog <http://quickstep.apache.org/blog> ?), and them turn off apache.github.io. I can help with the Jekyll if you can’t figure it out.
>
> Julian
>
>
>
>> On Dec 12, 2016, at 10:58 AM, Julian Hyde <jh...@apache.org> wrote:
>>
>> I got part way through the process and logged https://issues.apache.org/jira/browse/INFRA-13079 <https://issues.apache.org/jira/browse/INFRA-13079> for the rest. Please watch that case if you want to be updated.
>>
>>> On Dec 12, 2016, at 10:38 AM, Julian Hyde <jhyde@apache.org <ma...@apache.org>> wrote:
>>>
>>> The SVN URL should be https://svn.apache.org/repos/asf/incubator/quickstep/site/ <https://svn.apache.org/repos/asf/incubator/quickstep/site/> (see for instance https://svn.apache.org/repos/asf/incubator/tephra/site/ <https://svn.apache.org/repos/asf/incubator/tephra/site/>) but doesn’t exist currently.
>>>
>>> Per http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Repository <http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Repository> I think this means I need to create the repository and authorize committers. (Don’t worry, Quickstep will continue to use git for its source code, and for the source of the web site; SVN is just for the generated web site.)
>>>
>>> And I think we need to tell INFRA to enable svnpubsub. I don’t recall how to do that, and I can’t find online doc. Any mentors know?
>>>
>>> Julian
>>>
>>>
>>>> On Dec 12, 2016, at 9:56 AM, Marc Spehlmann <spehl.apache@gmail.com <ma...@gmail.com>> wrote:
>>>>
>>>> SVN pubsub sounds simple enough... but I cannot seem to find the url for
>>>> quickstep.
>>>>
>>>> I tried
>>>> svn co https://svn.apache.org/repos/asf/quickstep <https://svn.apache.org/repos/asf/quickstep> target
>>>> svn co https://svn.apache.org/repos/asf/quickstep <https://svn.apache.org/repos/asf/quickstep> target
>>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep <https://svn.apache.org/repos/asf/incubator-quickstep> target
>>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep/site <https://svn.apache.org/repos/asf/incubator-quickstep/site> target
>>>> __
>>>> svn: E170000: URL 'https://svn.apache.org/[ <https://svn.apache.org/[>...]' doesn't exist
>>>>
>>>> On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <jmp.quickstep@gmail.com <ma...@gmail.com>>
>>>> wrote:
>>>>
>>>>> Nice. Thanks Marc!
>>>>>
>>>>> On 12/11/16, 11:54 AM, "Marc Spehlmann" <spehl.apache@gmail.com <ma...@gmail.com>> wrote:
>>>>>
>>>>> Hey, we have a jekyll blog and a first blog article now! It can be
>>>>> viewed
>>>>>
>>>>> here http://apache.github.io/incubator-quickstep/ <http://apache.github.io/incubator-quickstep/>
>>>>>
>>>>> It's a page automatically generated by github. We can probably change
>>>>> the
>>>>> URL somehow, not sure off hand though.
>>>>>
>>>>> Editting instructions are included in the readme here
>>>>>
>>>>> https://github.com/apache/incubator-quickstep/tree/gh-pages <https://github.com/apache/incubator-quickstep/tree/gh-pages>
>>>>>
>>>>> If anyone wants to touch up the css or layout, have at it. I'm no web
>>>>> design expert, I rely on the pre-built themes.
>>>>>
>>>>> Anyone can write a post, all you need to know is markdown.
>>>>>
>>>>> Happy blogging!
>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>
>
Re: blog
Posted by Julian Hyde <jh...@apache.org>.
INFRA tell me that Quickstep is already using gitpubsub. So, if you push to https://github.com/apache/incubator-quickstep-site <https://github.com/apache/incubator-quickstep-site> it will automatically appear at http://quickstep.apache.org/ <http://quickstep.apache.org/>.
I think you should consider merging the content you just created into that site (maybe under http://quickstep.apache.org/blog <http://quickstep.apache.org/blog> ?), and them turn off apache.github.io. I can help with the Jekyll if you can’t figure it out.
Julian
> On Dec 12, 2016, at 10:58 AM, Julian Hyde <jh...@apache.org> wrote:
>
> I got part way through the process and logged https://issues.apache.org/jira/browse/INFRA-13079 <https://issues.apache.org/jira/browse/INFRA-13079> for the rest. Please watch that case if you want to be updated.
>
>> On Dec 12, 2016, at 10:38 AM, Julian Hyde <jhyde@apache.org <ma...@apache.org>> wrote:
>>
>> The SVN URL should be https://svn.apache.org/repos/asf/incubator/quickstep/site/ <https://svn.apache.org/repos/asf/incubator/quickstep/site/> (see for instance https://svn.apache.org/repos/asf/incubator/tephra/site/ <https://svn.apache.org/repos/asf/incubator/tephra/site/>) but doesn’t exist currently.
>>
>> Per http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Repository <http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Repository> I think this means I need to create the repository and authorize committers. (Don’t worry, Quickstep will continue to use git for its source code, and for the source of the web site; SVN is just for the generated web site.)
>>
>> And I think we need to tell INFRA to enable svnpubsub. I don’t recall how to do that, and I can’t find online doc. Any mentors know?
>>
>> Julian
>>
>>
>>> On Dec 12, 2016, at 9:56 AM, Marc Spehlmann <spehl.apache@gmail.com <ma...@gmail.com>> wrote:
>>>
>>> SVN pubsub sounds simple enough... but I cannot seem to find the url for
>>> quickstep.
>>>
>>> I tried
>>> svn co https://svn.apache.org/repos/asf/quickstep <https://svn.apache.org/repos/asf/quickstep> target
>>> svn co https://svn.apache.org/repos/asf/quickstep <https://svn.apache.org/repos/asf/quickstep> target
>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep <https://svn.apache.org/repos/asf/incubator-quickstep> target
>>> svn co https://svn.apache.org/repos/asf/incubator-quickstep/site <https://svn.apache.org/repos/asf/incubator-quickstep/site> target
>>> __
>>> svn: E170000: URL 'https://svn.apache.org/[ <https://svn.apache.org/[>...]' doesn't exist
>>>
>>> On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <jmp.quickstep@gmail.com <ma...@gmail.com>>
>>> wrote:
>>>
>>>> Nice. Thanks Marc!
>>>>
>>>> On 12/11/16, 11:54 AM, "Marc Spehlmann" <spehl.apache@gmail.com <ma...@gmail.com>> wrote:
>>>>
>>>> Hey, we have a jekyll blog and a first blog article now! It can be
>>>> viewed
>>>>
>>>> here http://apache.github.io/incubator-quickstep/ <http://apache.github.io/incubator-quickstep/>
>>>>
>>>> It's a page automatically generated by github. We can probably change
>>>> the
>>>> URL somehow, not sure off hand though.
>>>>
>>>> Editting instructions are included in the readme here
>>>>
>>>> https://github.com/apache/incubator-quickstep/tree/gh-pages <https://github.com/apache/incubator-quickstep/tree/gh-pages>
>>>>
>>>> If anyone wants to touch up the css or layout, have at it. I'm no web
>>>> design expert, I rely on the pre-built themes.
>>>>
>>>> Anyone can write a post, all you need to know is markdown.
>>>>
>>>> Happy blogging!
>>>>
>>>>
>>>>
>>>>
>>
>
Re: blog
Posted by Julian Hyde <jh...@apache.org>.
I got part way through the process and logged https://issues.apache.org/jira/browse/INFRA-13079 <https://issues.apache.org/jira/browse/INFRA-13079> for the rest. Please watch that case if you want to be updated.
> On Dec 12, 2016, at 10:38 AM, Julian Hyde <jh...@apache.org> wrote:
>
> The SVN URL should be https://svn.apache.org/repos/asf/incubator/quickstep/site/ <https://svn.apache.org/repos/asf/incubator/quickstep/site/> (see for instance https://svn.apache.org/repos/asf/incubator/tephra/site/ <https://svn.apache.org/repos/asf/incubator/tephra/site/>) but doesn’t exist currently.
>
> Per http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Repository <http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Repository> I think this means I need to create the repository and authorize committers. (Don’t worry, Quickstep will continue to use git for its source code, and for the source of the web site; SVN is just for the generated web site.)
>
> And I think we need to tell INFRA to enable svnpubsub. I don’t recall how to do that, and I can’t find online doc. Any mentors know?
>
> Julian
>
>
>> On Dec 12, 2016, at 9:56 AM, Marc Spehlmann <spehl.apache@gmail.com <ma...@gmail.com>> wrote:
>>
>> SVN pubsub sounds simple enough... but I cannot seem to find the url for
>> quickstep.
>>
>> I tried
>> svn co https://svn.apache.org/repos/asf/quickstep <https://svn.apache.org/repos/asf/quickstep> target
>> svn co https://svn.apache.org/repos/asf/quickstep <https://svn.apache.org/repos/asf/quickstep> target
>> svn co https://svn.apache.org/repos/asf/incubator-quickstep <https://svn.apache.org/repos/asf/incubator-quickstep> target
>> svn co https://svn.apache.org/repos/asf/incubator-quickstep/site <https://svn.apache.org/repos/asf/incubator-quickstep/site> target
>> __
>> svn: E170000: URL 'https://svn.apache.org/[ <https://svn.apache.org/[>...]' doesn't exist
>>
>> On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <jmp.quickstep@gmail.com <ma...@gmail.com>>
>> wrote:
>>
>>> Nice. Thanks Marc!
>>>
>>> On 12/11/16, 11:54 AM, "Marc Spehlmann" <spehl.apache@gmail.com <ma...@gmail.com>> wrote:
>>>
>>> Hey, we have a jekyll blog and a first blog article now! It can be
>>> viewed
>>>
>>> here http://apache.github.io/incubator-quickstep/ <http://apache.github.io/incubator-quickstep/>
>>>
>>> It's a page automatically generated by github. We can probably change
>>> the
>>> URL somehow, not sure off hand though.
>>>
>>> Editting instructions are included in the readme here
>>>
>>> https://github.com/apache/incubator-quickstep/tree/gh-pages <https://github.com/apache/incubator-quickstep/tree/gh-pages>
>>>
>>> If anyone wants to touch up the css or layout, have at it. I'm no web
>>> design expert, I rely on the pre-built themes.
>>>
>>> Anyone can write a post, all you need to know is markdown.
>>>
>>> Happy blogging!
>>>
>>>
>>>
>>>
>
Re: blog
Posted by Julian Hyde <jh...@apache.org>.
The SVN URL should be https://svn.apache.org/repos/asf/incubator/quickstep/site/ <https://svn.apache.org/repos/asf/incubator/quickstep/site/> (see for instance https://svn.apache.org/repos/asf/incubator/tephra/site/ <https://svn.apache.org/repos/asf/incubator/tephra/site/>) but doesn’t exist currently.
Per http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Repository <http://incubator.apache.org/guides/mentor.html#Set+Up+SVN+Repository> I think this means I need to create the repository and authorize committers. (Don’t worry, Quickstep will continue to use git for its source code, and for the source of the web site; SVN is just for the generated web site.)
And I think we need to tell INFRA to enable svnpubsub. I don’t recall how to do that, and I can’t find online doc. Any mentors know?
Julian
> On Dec 12, 2016, at 9:56 AM, Marc Spehlmann <sp...@gmail.com> wrote:
>
> SVN pubsub sounds simple enough... but I cannot seem to find the url for
> quickstep.
>
> I tried
> svn co https://svn.apache.org/repos/asf/quickstep target
> svn co https://svn.apache.org/repos/asf/quickstep target
> svn co https://svn.apache.org/repos/asf/incubator-quickstep target
> svn co https://svn.apache.org/repos/asf/incubator-quickstep/site target
> __
> svn: E170000: URL 'https://svn.apache.org/[...]' doesn't exist
>
> On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <jm...@gmail.com>
> wrote:
>
>> Nice. Thanks Marc!
>>
>> On 12/11/16, 11:54 AM, "Marc Spehlmann" <sp...@gmail.com> wrote:
>>
>> Hey, we have a jekyll blog and a first blog article now! It can be
>> viewed
>>
>> here http://apache.github.io/incubator-quickstep/
>>
>> It's a page automatically generated by github. We can probably change
>> the
>> URL somehow, not sure off hand though.
>>
>> Editting instructions are included in the readme here
>>
>> https://github.com/apache/incubator-quickstep/tree/gh-pages
>>
>> If anyone wants to touch up the css or layout, have at it. I'm no web
>> design expert, I rely on the pre-built themes.
>>
>> Anyone can write a post, all you need to know is markdown.
>>
>> Happy blogging!
>>
>>
>>
>>
Re: blog
Posted by Marc Spehlmann <sp...@gmail.com>.
SVN pubsub sounds simple enough... but I cannot seem to find the url for
quickstep.
I tried
svn co https://svn.apache.org/repos/asf/quickstep target
svn co https://svn.apache.org/repos/asf/quickstep target
svn co https://svn.apache.org/repos/asf/incubator-quickstep target
svn co https://svn.apache.org/repos/asf/incubator-quickstep/site target
__
svn: E170000: URL 'https://svn.apache.org/[...]' doesn't exist
On Mon, Dec 12, 2016 at 9:41 AM, Jignesh Patel <jm...@gmail.com>
wrote:
> Nice. Thanks Marc!
>
> On 12/11/16, 11:54 AM, "Marc Spehlmann" <sp...@gmail.com> wrote:
>
> Hey, we have a jekyll blog and a first blog article now! It can be
> viewed
>
> here http://apache.github.io/incubator-quickstep/
>
> It's a page automatically generated by github. We can probably change
> the
> URL somehow, not sure off hand though.
>
> Editting instructions are included in the readme here
>
> https://github.com/apache/incubator-quickstep/tree/gh-pages
>
> If anyone wants to touch up the css or layout, have at it. I'm no web
> design expert, I rely on the pre-built themes.
>
> Anyone can write a post, all you need to know is markdown.
>
> Happy blogging!
>
>
>
>
Re: blog
Posted by Jignesh Patel <jm...@gmail.com>.
Nice. Thanks Marc!
On 12/11/16, 11:54 AM, "Marc Spehlmann" <sp...@gmail.com> wrote:
Hey, we have a jekyll blog and a first blog article now! It can be viewed
here http://apache.github.io/incubator-quickstep/
It's a page automatically generated by github. We can probably change the
URL somehow, not sure off hand though.
Editting instructions are included in the readme here
https://github.com/apache/incubator-quickstep/tree/gh-pages
If anyone wants to touch up the css or layout, have at it. I'm no web
design expert, I rely on the pre-built themes.
Anyone can write a post, all you need to know is markdown.
Happy blogging!