This is an automated email from the ASF dual-hosted git repository.
critas pushed a commit to branch main
in repository https://gitbox.apache.org/repos/asf/iotdb-docs.git
The following commit(s) were added to refs/heads/main by this push:
new 890103b0 Add param sink.mark as general write request to data sync (#810)
890103b0 is described below
commit 890103b06057de4e051975846373a8f1abcc6e67
Author: leto-b <bi...@timecho.com>
AuthorDate: Fri Dec 26 11:15:24 2025 +0800
Add param sink.mark as general write request to data sync (#810)
* add sink.batch.max-delay-ms
* add sink.mark-as-general-write-request
---
.../Master/Table/User-Manual/Data-Sync_apache.md | 4 +--
.../Master/Table/User-Manual/Data-Sync_timecho.md | 34 ++++++++++++----------
.../latest-Table/User-Manual/Data-Sync_apache.md | 4 +--
.../latest-Table/User-Manual/Data-Sync_timecho.md | 3 ++
.../Master/Table/User-Manual/Data-Sync_apache.md | 4 +--
.../Master/Table/User-Manual/Data-Sync_timecho.md | 3 ++
.../latest-Table/User-Manual/Data-Sync_apache.md | 4 +--
.../latest-Table/User-Manual/Data-Sync_timecho.md | 3 ++
8 files changed, 36 insertions(+), 23 deletions(-)
diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md
index 9f49fff3..96141ff1 100644
--- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md
+++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md
@@ -503,7 +503,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| password | Password for the username. [...]
| batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. [...]
| batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. [...]
-| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) [...]
+| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) [...]
| batch.size-bytes | Maximum batch size (in bytes) for batch transmission. [...]
| compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. [...]
| compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. [...]
@@ -522,7 +522,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| password | Password for the username. [...]
| batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. [...]
| batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. [...]
-| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) [...]
+| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) [...]
| batch.size-bytes | Maximum batch size (in bytes) for batch transmission. [...]
| compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. [...]
| compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. [...]
diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md
index 861a30e4..b75ebccf 100644
--- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md
+++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md
@@ -580,21 +580,23 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
#### iotdb-thrift-sink
-| **Parameter** | **Description** [...]
-|:----------------------------|:---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [...]
-| sink | iotdb-thrift-sink or iotdb-thrift-async-sink [...]
-| node-urls | URLs of the DataNode service ports on the target IoTDB. (please note that the synchronization task does not support forwarding to its own service). [...]
-| user/username | username for connecting to the target IoTDB. Must have appropriate permissions. [...]
-| password | Password for the username. [...]
-| batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. [...]
-| batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. [...]
-| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) [...]
-| batch.size-bytes | Maximum batch size (in bytes) for batch transmission. [...]
-| compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. [...]
-| compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. [...]
-| rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. [...]
-| load-tsfile-strategy | When synchronizing file data, whether the receiver waits for the local load tsfile operation to complete before responding to the sender:<br>sync: Wait for the local load tsfile operation to complete before returning the response.<br>async: Do not wait for the local load tsfile operation to complete; return the response immediately. [...]
-| format | The payload formats for data transmission include the following options:<br> - hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.<br> - tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.<br> - tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization [...]
+
+| **Parameter** | **Description** [...]
+|:----------------------------|:---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [...]
+| sink | iotdb-thrift-sink or iotdb-thrift-async-sink [...]
+| node-urls | URLs of the DataNode service ports on the target IoTDB. (please note that the synchronization task does not support forwarding to its own service). [...]
+| user/usename | Usename for connecting to the target IoTDB. Must have appropriate permissions. [...]
+| password | Password for the username. [...]
+| batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. [...]
+| batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. [...]
+| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) [...]
+| batch.size-bytes | Maximum batch size (in bytes) for batch transmission. [...]
+| compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. [...]
+| compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. [...]
+| rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. [...]
+| load-tsfile-strategy | When synchronizing file data, whether the receiver waits for the local load tsfile operation to complete before responding to the sender:<br>sync: Wait for the local load tsfile operation to complete before returning the response.<br>async: Do not wait for the local load tsfile operation to complete; return the response immediately. [...]
+| format | The payload formats for data transmission include the following options:<br> - hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.<br> - tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.<br> - tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization [...]
+| mark-as-general-write-request | This parameter controls whether data forwarded by external pipes can be synchronized between dual-active pipes (configured on the sender side of dual-active external pipes). (Available since v2.0.5) | Boolean: true / false. True: can synchronize; False: cannot synchronize; | Optional | False |
#### iotdb-air-gap-sink
@@ -630,6 +632,8 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| ssl.trust-store-path | Path to the trust store certificate for SSL connection. [...]
| ssl.trust-store-pwd | Password for the trust store certificate. [...]
| format | The payload formats for data transmission include the following options:<br> - hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.<br> - tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.<br> - tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization [...]
+| mark-as-general-write-request | This parameter controls whether data forwarded by external pipes can be synchronized between dual-active pipes (configured on the sender side of dual-active external pipes).(Available since v2.0.5) | Boolean: true / false. True: can synchronize; False: cannot synchronize; | Optional | False |
+
#### write-back-sink
diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md
index ce3acc79..0f88e1b3 100644
--- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md
+++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md
@@ -503,7 +503,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| password | Password for the username. [...]
| batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. [...]
| batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. [...]
-| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) [...]
+| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) [...]
| batch.size-bytes | Maximum batch size (in bytes) for batch transmission. [...]
| compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. [...]
| compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. [...]
@@ -522,7 +522,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| password | Password for the username. [...]
| batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. [...]
| batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. [...]
-| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) [...]
+| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) [...]
| batch.size-bytes | Maximum batch size (in bytes) for batch transmission. [...]
| compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. [...]
| compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. [...]
diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md
index 4a0e0bb6..cc7635c0 100644
--- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md
+++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md
@@ -595,6 +595,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. [...]
| load-tsfile-strategy | When synchronizing file data, whether the receiver waits for the local load tsfile operation to complete before responding to the sender:<br>sync: Wait for the local load tsfile operation to complete before returning the response.<br>async: Do not wait for the local load tsfile operation to complete; return the response immediately. [...]
| format | The payload formats for data transmission include the following options:<br> - hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.<br> - tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.<br> - tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization [...]
+| mark-as-general-write-request | This parameter controls whether data forwarded by external pipes can be synchronized between dual-active pipes (configured on the sender side of dual-active external pipes). | Boolean: true / false. True: can synchronize; False: cannot synchronize; | Optional | False |
#### iotdb-air-gap-sink
@@ -629,6 +630,8 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| ssl.trust-store-path | Path to the trust store certificate for SSL connection. [...]
| ssl.trust-store-pwd | Password for the trust store certificate. [...]
| format | The payload formats for data transmission include the following options:<br> - hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.<br> - tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.<br> - tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization [...]
+| mark-as-general-write-request | This parameter controls whether data forwarded by external pipes can be synchronized between dual-active pipes (configured on the sender side of dual-active external pipes).(Available since v2.0.5) | Boolean: true / false. True: can synchronize; False: cannot synchronize; | Optional | False |
+
#### write-back-sink
diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md
index a328e2f7..bdeccdb1 100644
--- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md
+++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md
@@ -493,7 +493,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root |
| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true |
| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 |
-| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 |
+| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5及以后版本支持） | Integer | 选填 | 1 |
| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 |
| compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" |
| compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 |
@@ -512,7 +512,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root |
| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true |
| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 |
-| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 |
+| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5及以后版本支持） | Integer | 选填 | 1 |
| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 |
| compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" |
| compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 |
diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md
index 2f522b8f..db225e09 100644
--- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md
+++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md
@@ -588,6 +588,8 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| rate-limit-bytes-per-second | 每秒最大允许传输的 byte 数，计算压缩后的 byte（如压缩），若小于 0 则不限制 | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | 选填 | -1 |
| load-tsfile-strategy | 文件同步数据时，接收端请求返回发送端前，是否等待接收端本地的 load tsfile 执行结果返回。<br>sync：等待本地的 load tsfile 执行结果返回；<br>async：不等待本地的 load tsfile 执行结果返回。 | String: sync / async | 选填 | sync |
| format | 数据传输的payload格式， 可选项包括：<br> - hybrid： 取决于 processor 传递过来的格式（tsfile或tablet），sink不做任何转换。<br> - tsfile：强制转换成tsfile发送，可用于数据文件备份等场景。<br> - tablet：强制转换成tsfile发送，可用于发送端/接收端数据类型不完全兼容时的数据同步（以减少报错）。 | String: hybrid / tsfile / tablet | 选填 | hybrid |
+| mark-as-general-write-request | 该参数可控制双活 pipe 之间能否同步外部 pipe 转发的数据（配置到双活外部 pipe 的发送端）(V2.0.5及以后版本支持） | Boolean: true / false。True：能同步；False：不能同步； | 选填 | False |
+
#### iotdb-air-gap-sink
@@ -623,6 +625,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - |
| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - |
| format | 数据传输的payload格式， 可选项包括：<br> - hybrid： 取决于 processor 传递过来的格式（tsfile或tablet），sink不做任何转换。<br> - tsfile：强制转换成tsfile发送，可用于数据文件备份等场景。<br> - tablet：强制转换成tsfile发送，可用于发送端/接收端数据类型不完全兼容时的数据同步（以减少报错）。 | String: hybrid / tsfile / tablet | 选填 | hybrid |
+| mark-as-general-write-request | 该参数可控制双活 pipe 之间能否同步外部 pipe 转发的数据（配置到双活外部 pipe 的发送端） | Boolean: true / false。True：能同步；False：不能同步； | 选填 | False |
#### write-back-sink
diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md
index 8eeac6d2..f42ef1c2 100644
--- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md
+++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md
@@ -493,7 +493,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root |
| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true |
| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 |
-| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） (V2.0.5.1及以后版本支持） | Integer | 选填 | 1 |
+| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） (V2.0.5及以后版本支持） | Integer | 选填 | 1 |
| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 |
| compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" |
| compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 |
@@ -512,7 +512,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root |
| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true |
| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 |
-| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 |
+| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5及以后版本支持） | Integer | 选填 | 1 |
| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 |
| compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" |
| compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 |
diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md
index c49046c9..2a5cd4d3 100644
--- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md
+++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md
@@ -589,6 +589,8 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| rate-limit-bytes-per-second | 每秒最大允许传输的 byte 数，计算压缩后的 byte（如压缩），若小于 0 则不限制 | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | 选填 | -1 |
| load-tsfile-strategy | 文件同步数据时，接收端请求返回发送端前，是否等待接收端本地的 load tsfile 执行结果返回。<br>sync：等待本地的 load tsfile 执行结果返回；<br>async：不等待本地的 load tsfile 执行结果返回。 | String: sync / async | 选填 | sync |
| format | 数据传输的payload格式， 可选项包括：<br> - hybrid： 取决于 processor 传递过来的格式（tsfile或tablet），sink不做任何转换。<br> - tsfile：强制转换成tsfile发送，可用于数据文件备份等场景。<br> - tablet：强制转换成tsfile发送，可用于发送端/接收端数据类型不完全兼容时的数据同步（以减少报错）。 | String: hybrid / tsfile / tablet | 选填 | hybrid |
+| mark-as-general-write-request | 该参数可控制双活 pipe 之间能否同步外部 pipe 转发的数据（配置到双活外部 pipe 的发送端）(V2.0.5及以后版本支持） | Boolean: true / false。True：能同步；False：不能同步； | 选填 | False |
+
#### iotdb-air-gap-sink
@@ -624,6 +626,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1
| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - |
| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - |
| format | 数据传输的payload格式， 可选项包括：<br> - hybrid： 取决于 processor 传递过来的格式（tsfile或tablet），sink不做任何转换。<br> - tsfile：强制转换成tsfile发送，可用于数据文件备份等场景。<br> - tablet：强制转换成tsfile发送，可用于发送端/接收端数据类型不完全兼容时的数据同步（以减少报错）。 | String: hybrid / tsfile / tablet | 选填 | hybrid |
+| mark-as-general-write-request | 该参数可控制双活 pipe 之间能否同步外部 pipe 转发的数据（配置到双活外部 pipe 的发送端） | Boolean: true / false。True：能同步；False：不能同步； | 选填 | False |
#### write-back-sink