You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@nuttx.apache.org by GitBox <gi...@apache.org> on 2020/11/26 09:22:48 UTC
[GitHub] [incubator-nuttx] yjdwbj opened a new issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
yjdwbj opened a new issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405
Hi, I had have apply the same of issues, I was think that I am did wrong way. so I make a folder and clone it. But it's got this error.
```sh
~$ tools/configure.sh nucleo-l152re:nsh
Copy files
Select CONFIG_HOST_LINUX=y
Refreshing...
[.....]
arch/arm/src/imxrt/Kconfig:1212: syntax error
arch/arm/src/imxrt/Kconfig:1211: invalid option
arch/arm/src/stm32l4/Kconfig:5236: syntax error
arch/arm/src/stm32l4/Kconfig:5185: missing end statement for this entry
arch/arm/src/stm32l4/Kconfig:5053: missing end statement for this entry
arch/arm/src/stm32l4/Kconfig:8: missing end statement for this entry
arch/arm/Kconfig:1017: missing end statement for this entry
arch/arm/Kconfig:7: missing end statement for this entry
Kconfig:1809: missing end statement for this entry
arch/arm/src/stm32l4/Kconfig:5235: invalid statement
arch/arm/src/stm32l4/Kconfig:5245: unexpected end statement
arch/arm/src/stm32l4/Kconfig:5248: syntax error
arch/arm/src/stm32l4/Kconfig:5247: invalid statement
arch/arm/src/stm32l4/Kconfig:5257: unexpected end statement
arch/arm/src/stm32l4/Kconfig:5260: syntax error
arch/arm/src/stm32l4/Kconfig:5259: invalid statement
arch/arm/src/stm32l4/Kconfig:5269: unexpected end statement
arch/arm/src/stm32l4/Kconfig:5271: unexpected end statement
arch/arm/src/stm32l4/Kconfig:5273: unexpected end statement
arch/arm/src/stm32l4/Kconfig:6097: unexpected end statement
arch/arm/Kconfig:1018: unexpected end statement
arch/arm/Kconfig:1032: unexpected end statement
Kconfig:1811: unexpected end statement
boards/sim/sim/sim/Kconfig:53: syntax error
boards/sim/sim/sim/Kconfig:52: invalid option
drivers/note/Kconfig:62: syntax error
drivers/note/Kconfig:61: invalid option
drivers/sensors/Kconfig:227: syntax error
drivers/sensors/Kconfig:226: invalid option
make: *** [tools/Makefile.unix:492: olddefconfig] Error 1
ERROR: failed to refresh
```
First of all, I installed the **`kconfig-frontends 4.11.0.1+dfsg-2`**. I found this syntax error have the same of characteristic，the character '>` in the Kconfig. I filter it out below:
```sh
~$grep -n '>' arch/arm/src/imxrt/Kconfig
1211: depends on IMXRT_DTCM > 0
~$ grep -n '>' arch/arm/src/stm32l4/Kconfig
5235:if STM32L4_ADC1_INJ_CHAN > 0
5247:if STM32L4_ADC2_INJ_CHAN > 0
5259:if STM32L4_ADC3_INJ_CHAN > 0
~$ grep -n '>' boards/sim/sim/sim/Kconfig
52: depends on SENSORS_WTGAHRS2 && SIM_UART_NUMBER > 0
~$ grep -n '>' drivers/note/Kconfig
61: default 256 if TASK_NAME_SIZE > 0
```
Finally, I removed these character '>' by a bash shell, then everything is fine.
```sh
~$ make menuconfig 2>&1 | grep "Kconfig" | awk -F ':' '{print $1}' | uniq | xargs sed -i 's/ >.*//g'
```
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] yjdwbj commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
yjdwbj commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734515996
@v01d My OS is Debian 10(Buster) , I used Linux kernel is my custom build.
```sh
uname -a
Linux debian 5.8.14-20200909-lcy #1 SMP Wed Oct 14 10:00:45 CST 2020 x86_64 GNU/Linux
```
Which means I use `make menuconfig` for `latest Linux kernel` have nothing syntax error. So , I am sure my environment and cross-tools is right. Because I removed these character '>', then can build the final nuttx.bin , and then flash to the target board. and the board can startup run.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] btashton commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
btashton commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734668183
@yjdwbj but did you see my comment I used a clean Debian container with the kconfig-frontends from the distribution.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] v01d commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
v01d commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734405785
The version report is the same as I have on 20.04 (just a different build: 4.11.0.1+dfsg-3).
@yjdwbj what OS are you using? I'm suspecting there is something wrong in your environment.
@davids5 this is our documentation right now, distinguishing Ubuntu 20.04 from other cases: file:///home/v01d/coding/nuttx_doc/nuttx/Documentation/_build/html/quickstart/quickstart.html
Which means that we are indirectly specifying a specific kconfig version in either case.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] yjdwbj commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
yjdwbj commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734522332
> You should definitely not be removing the '>' . If you are getting a valid build you are lucky and likely only because you are not using one of the configuration that actually uses it.
>
> Technically this is the build of kconfig-frontends that we actually support and test against
> https://bitbucket.org/nuttx/tools/src/master/kconfig-frontends/
>
> Can you try using that?
Here is my `kconfig-frontends"
```sh
~$ dpkg -l | grep "kconfig-frontends"
ii kconfig-frontends 4.11.0.1+dfsg-2 amd64 Standalone implementation of the Linux Kconfig parser and frontend
```
I check out the `https://bitbucket.org/nuttx/tools/src/master/kconfig-frontends/` code . The latest commit at 2018-02-14 that it said "kconfig-configs: Update .version and remove old files so that is an exact copy of 4.11.0.1". Do you means the nuttx must use the `Special kconfig-frontends`, the other OS release maybe not working, or have some else reason?
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] btashton edited a comment on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
btashton edited a comment on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734630057
I really think this is something broken in the environment. I just grabbed the `debian:10` docker container and ran this:
```
apt install make gcc git kconfig-frontends genromfs
git clone https://github.com/apache/incubator-nuttx nuttx
git clone https://github.com/apache/incubator-nuttx-apps apps
cd nuttx
./tools/configure.sh sim:nsh
make -j8
./nuttx
login: admin
password:
User Logged-in!
NuttShell (NSH) NuttX-10.0.0
MOTD: username=admin password=Administrator
nsh> ps
PID PPID PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK COMMAND
0 0 0 FIFO Kthread N-- Ready 00000000 004096 Idle Task
1 0 100 FIFO Task --- Running 00000000 004112 init
nsh> poweroff
root@b4cfb3d6b1
```
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] avatar1912 edited a comment on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
avatar1912 edited a comment on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-846823274
> Yeah, I am sure about the question point is that must use the `https://bitbucket.org/nuttx/tools/src/master/kconfig-frontends/` . The Debian's release of `kconfig-frontends 4.11.0.1+dfsg-2` is can't working.
Good Jobs!!! I resolved my problem by this version of kconfig-frontends. on ubuntu18.04.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] v01d commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
v01d commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734522827
> I check out the `https://bitbucket.org/nuttx/tools/src/master/kconfig-frontends/` code . The latest commit at 2018-02-14 that it said "kconfig-configs: Update .version and remove old files so that is an exact copy of 4.11.0.1". Do you means the nuttx must use the `Special kconfig-frontends`, the other OS release maybe not working, or have some else reason?
The problem is that there doesn't seem to be an authoritative source for kconfig-frontends source-code anymore so now there are many forks and each distro uses different patches. But I think that it is worth it to try to support kconfig-frontends as packaged from major OSs so that bootstrapping NuttX is simpler.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] v01d edited a comment on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
v01d edited a comment on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734405785
The version report is the same as I have on 20.04 (just a different build: 4.11.0.1+dfsg-3).
@yjdwbj what OS are you using? I'm suspecting there is something wrong in your environment.
@davids5 this is our documentation right now, distinguishing Ubuntu 20.04 from other cases: https://nuttx.apache.org/docs/latest/quickstart/index.html
Which means that we are indirectly specifying a specific kconfig version in either case.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] davids5 commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
davids5 commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734402774
@btashton , @v01d - I have seen this issue mentioned before. I believe it is a version-itas issue. Do we have a "Prerequisite Section" somewhere that lists the minimum versions of tools we require?
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] yjdwbj closed issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
yjdwbj closed issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] yjdwbj commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
yjdwbj commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734662401
Yeah, I am sure about the question point is that must use the `https://bitbucket.org/nuttx/tools/src/master/kconfig-frontends/` . The Debian's release of `kconfig-frontends 4.11.0.1+dfsg-2` is can't working.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] btashton commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
btashton commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734518435
You should definitely not be removing the '>' . If you are getting a valid build you are lucky and likely only because you are not using one of the configuration that actually uses it.
Technically this is the build of kconfig-frontends that we actually support and test against
`https://bitbucket.org/nuttx/tools/src/master/kconfig-frontends/`
Can you try using that?
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] btashton edited a comment on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
btashton edited a comment on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734630057
I really think this is something broken in the environment. I just grabbed the `debian:10` docker container and ran this:
```
apt install make gcc git kconfig-frontends genromfs
git clone https://github.com/apache/incubator-nuttx --depth 1 nuttx
git clone https://github.com/apache/incubator-nuttx-apps --depth 1 apps
cd nuttx
./tools/configure.sh sim:nsh
make -j8
./nuttx
login: admin
password:
User Logged-in!
NuttShell (NSH) NuttX-10.0.0
MOTD: username=admin password=Administrator
nsh> ps
PID PPID PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK COMMAND
0 0 0 FIFO Kthread N-- Ready 00000000 004096 Idle Task
1 0 100 FIFO Task --- Running 00000000 004112 init
nsh> poweroff
root@b4cfb3d6b1
```
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] v01d commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
v01d commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734522475
> @v01d My OS is Debian 10(Buster) , I used Linux kernel is my custom build.
>
> ```shell
> uname -a
> Linux debian 5.8.14-20200909-lcy #1 SMP Wed Oct 14 10:00:45 CST 2020 x86_64 GNU/Linux
> ```
>
> Which means I use `make menuconfig` for `latest Linux kernel` have nothing syntax error. So , I am sure my environment and cross-tools is right. Because I removed these character '>', then can build the final nuttx.bin , and then flash to the target board. and the board can startup run.
Comparing the kconfig-frontends package between Debian 10 and Ubuntu 20.04 they appear to use the same version. At most there's some configuration difference or different patching being done, so I'm not sure what could be happening. Maybe some dependency is different?
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] btashton commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
btashton commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734630057
I really think this is something broken in the environment. I just grabbed the `debian:10` docker container and ran this:
```
apt install make gcc git kconfig-frontends
git clone https://github.com/apache/incubator-nuttx --depth 1 nuttx
git clone https://github.com/apache/incubator-nuttx-apps --depth 1 apps
cd nuttx
./tools/configure.sh sim:nsh
```
and
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] btashton commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
btashton commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734672870
It is strange because I was using this `kconfig-frontends/stable 4.11.0.1+dfsg-2 amd64` from Debian 10. But I am glad to hear you have it working now using the source repo.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] btashton edited a comment on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
btashton edited a comment on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734518435
You should definitely not be removing the '>' . If you are getting a valid build you are lucky and likely only because you are not using one of the configuration that actually uses it.
Technically this is the build of kconfig-frontends that we actually support and test against
https://bitbucket.org/nuttx/tools/src/master/kconfig-frontends/
Can you try using that?
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] avatar1912 commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
avatar1912 commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-846823274
> Yeah, I am sure about the question point is that must use the `https://bitbucket.org/nuttx/tools/src/master/kconfig-frontends/` . The Debian's release of `kconfig-frontends 4.11.0.1+dfsg-2` is can't working.
Good Jobs!!! I resolved my problem by this version of kconfig-frontends.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [incubator-nuttx] yjdwbj commented on issue #2405: tools/configure.sh a lot of syntax error,kconfig-frontends-v4.11
Posted by GitBox <gi...@apache.org>.
yjdwbj commented on issue #2405:
URL: https://github.com/apache/incubator-nuttx/issues/2405#issuecomment-734671935
@btashton I had have saw your comment , and I actually find out the question point. I have compile the `kconfig-frontends` from `https://bitbucket.org/nuttx/tools/src/master/kconfig-frontends/`. and the syntax error really disappeared.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org