You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@continuum.apache.org by "Johnny R. Ruiz III" <jr...@exist.com> on 2005/06/23 10:17:31 UTC
I can't add M2 Project
Hi,
I successfully installed Continuum1.0-alpha-2 in my laptop. I launch
continuum using a Web Browser and tried to add an M2 project.
The POM that I used was
http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml.
There was an error on adding this project. The result is:
org.apache.maven.continuum.scm.ContinuumScmException: Error while
checking out the project.
at
org.apache.maven.continuum.scm.DefaultContinuumScm.checkOut(DefaultContinuumScm.java:84)
at
org.apache.maven.continuum.scm.queue.CheckOutTaskExecutor.executeTask(CheckOutTaskExecutor.java:80)
at
org.codehaus.plexus.taskqueue.execution.ThreadedTaskQueueExecutor$ExecutorRunnable.run(ThreadedTaskQueueExecutor.java:100)
at java.lang.Thread.run(Thread.java:534)
Anyone have an idea on the problem?
Thanks a lot -- jruiz
Re: I can't add M2 Project
Posted by Christian Schlaefcke <cs...@wms-network.de>.
Hi,
yeah, it´s right the project is there but when I click build i get the
following:
<snip>
Build event for project 'Maven SCM Test':Build started.
2005-06-28 14:39:55,015 [Thread-4] WARN ContinuumStore - Rolling back
transaction.
Build event for project 'Maven SCM Test':Checkout complete.
2005-06-28 14:39:55,031 [Thread-4] ERROR BuildController - Internal
error while building the project.
org.apache.maven.continuum.store.ContinuumStoreException: Error while
setting build state.
at
org.apache.maven.continuum.store.ModelloJPoxContinuumStore.setIsUpdating(ModelloJPoxContinuumStore.java:693)
at
org.apache.maven.continuum.buildcontroller.DefaultBuildController.update(DefaultBuildController.java:190)
at
org.apache.maven.continuum.buildcontroller.DefaultBuildController.build(DefaultBuildController.java:139)
at
org.apache.maven.continuum.buildcontroller.BuildProjectTaskExecutor.executeTask(BuildProjectTaskExecutor.java:50)
at
org.codehaus.plexus.taskqueue.execution.ThreadedTaskQueueExecutor$ExecutorRunnable.run(ThreadedTaskQueueExecutor.java:100)
at java.lang.Thread.run(Thread.java:534)
Caused by:
org.apache.maven.continuum.project.state.ContinuumProjectStateGuardException:
To be able to go into the state 'updating', the project as to be in one
of the states in ['new', 'error', 'ok', 'failed'] but the project was in
the 'checking out' sta
te.
at
org.apache.maven.continuum.project.state.DefaultContinuumProjectStateGuard.assertInStates(DefaultContinuumProjectStateGuard.java:206)
at
org.apache.maven.continuum.project.state.DefaultContinuumProjectStateGuard.assertTransition(DefaultContinuumProjectStateGuard.java:114)
at
org.apache.maven.continuum.store.ModelloJPoxContinuumStore.setIsUpdating(ModelloJPoxContinuumStore.java:683)
... 5 more
Build event for project 'Maven SCM Test':Build complete.
2005-06-28 14:39:55,062 [PoolThread-0] ERROR VelocityComponent - RHS of
#set statement is null. Context will not be modified. screens/Summary.vm
[line 1, column 1]
2005-06-28 14:39:59,109 [Thread-11] INFO SvnCommand:check-out - Unknown
file status: ' '.
2005-06-28 14:39:59,125 [Thread-5] INFO ContinuumScm - Checked out 0 files.
I restarted "continuum" and hit "build" again:
[INFO] The application server has started.
setting target = Summary.vm
target = Summary.vm
2005-06-28 14:42:48,218 [PoolThread-1] ERROR VelocityComponent - RHS of
#set statement is null. Context will not be modified. screens/Summary.vm
[line 1, column 1]
14:42:48.593 EVENT Started HttpContext[/]
2005-06-28 14:42:50,875 [PoolThread-1] INFO ContinuumCore - Enqueuing
'Maven SCM Test'.
target = Summary.vm
2005-06-28 14:42:50,953 [PoolThread-1] ERROR VelocityComponent - RHS of
#set statement is null. Context will not be modified. screens/Summary.vm
[line 1, column 1]
Build event for project 'Maven SCM Test':Build started.
Build event for project 'Maven SCM Test':Checkout started.
2005-06-28 14:42:51,078 [Thread-4] INFO ContinuumScm - Updating project:
id: '1', name 'Maven SCM Test'.
2005-06-28 14:42:51,109 [Thread-4] INFO SvnCommand:update - Executing:
svn --non-interactive update
2005-06-28 14:42:51,109 [Thread-4] INFO SvnCommand:update - Working
directory:
C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
2005-06-28 14:42:53,109 [Thread-11] INFO SvnCommand:update - Unknown
file status: 'R'.
2005-06-28 14:42:53,125 [Thread-4] INFO ContinuumScm - Updated 0 files.
Build event for project 'Maven SCM Test':Checkout complete.
2005-06-28 14:42:53,156 [Thread-4] INFO ContinuumScm - Updating project:
id: '1', name 'Maven SCM Test'.
2005-06-28 14:42:53,156 [Thread-4] INFO SvnCommand:update - Executing:
svn --non-interactive update
2005-06-28 14:42:53,156 [Thread-4] INFO SvnCommand:update - Working
directory:
C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
2005-06-28 14:42:55,093 [Thread-13] INFO SvnCommand:update - Unknown
file status: 'R'.
2005-06-28 14:42:55,125 [Thread-4] INFO ContinuumScm - Updated 0 files.
2005-06-28 14:42:55,125 [Thread-4] INFO ContinuumCore - Updating project
'Maven SCM Test'.
2005-06-28 14:42:55,140 [Thread-4] DEBUG ArtifactResolver - Resolving:
org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
{localRepository: [local] ->
file://C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
{remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
2005-06-28 14:42:55,156 [Thread-4] INFO ArtifactTransformation:snapshot
- maven-scm: resolved to version 1.0-alpha-2-20050627.163924-2 from
local repository
2005-06-28 14:42:55,234 [Thread-4] INFO BuildController - Build id: '1'.
Build event for project 'Maven SCM Test':Running goals.
2005-06-28 14:42:55,250 [Thread-4] INFO ShellCommandHelper - Executing:
m2 clean:clean install
2005-06-28 14:42:55,250 [Thread-4] INFO ShellCommandHelper - Working
directory:
C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
</snip>
Looks better this time, but now it seems like continuum freezes while
running
<snip>
Build event for project 'Maven SCM Test':Running goals.
2005-06-28 14:49:09,250 [Thread-4] INFO ShellCommandHelper - Executing:
m2 clean:clean install
2005-06-28 14:49:09,250 [Thread-4] INFO ShellCommandHelper - Working
directory:
C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
</snip>
It looks like I´m very far away from getting my own projekts rujnning
under m2/continuum when I cannot even get existing projekts running. I
get the impression that "alpha" really means "alpha" ;-) Or is it just
my approach that is bejond alpha? :-)
Tthanks & regards,
Chris
Trygve Laugstøl schrieb:
>Answers inline.
>
>When writing new mails do NOT reply to a existing thread, it's confusing
>and people assume it's related to the original subject message.
>
>On Tue, Jun 28, 2005 at 01:40:26PM +0200, Christian Schlaefcke wrote:
>
>
>>Hi,
>>
>>I just tried to get this running now, but the SQLException is still thrown:
>>[INFO] Adding XML-RPC handler for role
>>'org.apache.maven.continuum.xmlrpc.ContinuumXmlRpc to name 'continuum'.
>>[INFO] The application server has started.
>>setting target = Summary.vm
>>target = Summary.vm
>>2005-06-28 13:32:30,468 [PoolThread-1] ERROR VelocityComponent - RHS of
>>#set statement is null. Context will not be modified. screens/Summary.vm
>>[line 1, column 1]
>>13:32:30.656 EVENT Started HttpContext[/]
>>target = Add.vm
>>2005-06-28 13:32:39,203 [PoolThread-0] INFO
>>ContinuumProjectBuilder:maven-two-builder - Downloading
>>http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
>>2005-06-28 13:32:39,421 [PoolThread-0] DEBUG ArtifactResolver -
>>Resolving: org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
>>{localRepository: [local] ->
>>file://C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
>>{remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
>>2005-06-28 13:32:39,437 [PoolThread-0] INFO
>>ArtifactTransformation:snapshot - maven-scm: checking for updates from
>>central
>>2005-06-28 13:32:39,437 [PoolThread-0] INFO WagonManager - Retrieving
>>snapshot information for maven-scm 1.0-alpha-2-SNAPSHOT
>>2005-06-28 13:32:41,062 [PoolThread-0] INFO
>>ArtifactTransformation:snapshot - maven-scm: resolved to version
>>1.0-alpha-2-20050627.163924-2 from repository central
>>
>>
>
>This exception is a JPOX "feature". No idea why they write it out to
>System.err instead of their logging facility.
>
>
>
>>java.sql.SQLException: Table not found: SEQUENCE_TABLE in statement
>>[SELECT NEXT_VAL FROM SEQUENCE_TABLE WHERE SEQUENCE_NAME=?]
>>at org.hsqldb.jdbc.jdbcUtil.throwError(Unknown Source)
>>at org.hsqldb.jdbc.jdbcPreparedStatement.<init>(Unknown Source)
>>at org.hsqldb.jdbc.jdbcConnection.prepareStatement(Unknown Source)
>>at org.jpox.store.table.SequenceTable.getNextVal(SequenceTable.java:155)
>>at
>>org.jpox.poid.SequenceTablePoidGenerator.reserveBlock(SequenceTablePoidGenerator.java:74)
>>at org.jpox.poid.PoidManager.obtainPoidBlock(PoidManager.java:85)
>>at org.jpox.poid.PoidManager.getPoidBlock(PoidManager.java:181)
>>at org.jpox.poid.PoidManager.getPoid(PoidManager.java:54)
>>at org.jpox.store.StoreManager.getNextOID(StoreManager.java:1301)
>>at org.jpox.store.table.JDOBaseTable.newOID(JDOBaseTable.java:134)
>>at org.jpox.store.StoreManager.newObjectID(StoreManager.java:1099)
>>at org.jpox.state.StateManagerImpl.<init>(StateManagerImpl.java:375)
>>at
>>org.jpox.AbstractPersistenceManager.internalMakePersistent(AbstractPersistenceManager.java:839)
>>at
>>org.jpox.AbstractPersistenceManager.makePersistent(AbstractPersistenceManager.java:860)
>>at
>>org.apache.maven.continuum.project.ContinuumJPoxStore.addContinuumProject(ContinuumJPoxStore.java:173)
>>at
>>org.apache.maven.continuum.store.ModelloJPoxContinuumStore.addProject(ModelloJPoxContinuumStore.java:100)
>>at
>>org.apache.maven.continuum.core.DefaultContinuumCore.addProjectAndCheckOutSources(DefaultContinuumCore.java:767)
>>at
>>org.apache.maven.continuum.core.DefaultContinuumCore.addProjectsFromUrl(DefaultContinuumCore.java:209)
>>at
>>org.apache.maven.continuum.core.DefaultContinuumCore.addProjectsFromUrl(DefaultContinuumCore.java:175)
>>at
>>org.apache.maven.continuum.DefaultContinuum.addMavenTwoProject(DefaultContinuum.java:328)
>>at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>at
>>sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>at
>>sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>at java.lang.reflect.Method.invoke(Method.java:324)
>>at ognl.OgnlRuntime.invokeMethod(OgnlRuntime.java:255)
>>at ognl.OgnlRuntime.callAppropriateMethod(OgnlRuntime.java:553)
>>at ognl.ObjectMethodAccessor.callMethod(ObjectMethodAccessor.java:54)
>>at ognl.OgnlRuntime.callMethod(OgnlRuntime.java:577)
>>at ognl.ASTMethod.getValueBody(ASTMethod.java:84)
>>at ognl.SimpleNode.getValue(SimpleNode.java:129)
>>at ognl.Ognl.getValue(Ognl.java:335)
>>at ognl.Ognl.getValue(Ognl.java:380)
>>at ognl.Ognl.getValue(Ognl.java:359)
>>at
>>org.codehaus.plexus.formica.action.CallMethod.uponSuccessfulValidation(CallMethod.java:21)
>>at
>>org.codehaus.plexus.formica.action.AbstractEntityAction.execute(AbstractEntityAction.java:100)
>>at org.codehaus.plexus.action.web.ActionValve.invoke(ActionValve.java:73)
>>at
>>org.codehaus.plexus.summit.pipeline.SummitPipeline.invoke(SummitPipeline.java:45)
>>at org.codehaus.plexus.summit.Summit.doGet(Summit.java:37)
>>at org.codehaus.plexus.summit.Summit.doPost(Summit.java:91)
>>at javax.servlet.http.HttpServlet.service(HttpServlet.java:615)
>>at javax.servlet.http.HttpServlet.service(HttpServlet.java:688)
>>at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:358)
>>at
>>org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationHandler.java:294)
>>at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:567)
>>at org.mortbay.http.HttpContext.handle(HttpContext.java:1807)
>>at
>>org.mortbay.jetty.servlet.WebApplicationContext.handle(WebApplicationContext.java:525)
>>at org.mortbay.http.HttpContext.handle(HttpContext.java:1757)
>>at org.mortbay.http.HttpServer.service(HttpServer.java:879)
>>at org.mortbay.http.HttpConnection.service(HttpConnection.java:790)
>>at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:961)
>>at org.mortbay.http.HttpConnection.handle(HttpConnection.java:807)
>>at org.mortbay.http.SocketListener.handleConnection(SocketListener.java:218)
>>at org.mortbay.util.ThreadedServer.handle(ThreadedServer.java:300)
>>at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:511)
>>2005-06-28 13:32:42,171 [PoolThread-0] INFO RDBMS - Creating table
>>SEQUENCE_TABLE
>>
>>
>
>See, it just creates the missing sequence table after complaining about
>it.
>
>
>
>>2005-06-28 13:32:42,296 [PoolThread-0] ERROR VelocityComponent - RHS of
>>#set statement is null. Context will not be modified. screens/Summary.vm
>>[line 1, column 1]
>>2005-06-28 13:32:42,328 [Thread-5] INFO ContinuumScm - Checking out
>>project: 'Maven SCM Test', id: '1' to
>>'C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1'.
>>2005-06-28 13:32:42,343 [Thread-5] INFO SvnCommand:check-out - Working
>>directory:
>>C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
>>2005-06-28 13:32:42,343 [Thread-5] INFO SvnCommand:check-out - Command
>>line: svn --non-interactive checkout
>>http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/ 1
>>2005-06-28 13:32:50,109 [Thread-11] INFO SvnCommand:check-out - Unknown
>>file status: ' '.
>>2005-06-28 13:32:50,109 [Thread-5] INFO ContinuumScm - Checked out 0 files.
>>
>>
>
>Seems to me that it added the project as expected.
>
>--
>Trygve
>
>
>
>>I have just downloaded and extracted continuum and chosen add M2 project
>>with the Link:
>>http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
>>
>>Do I need anything else to get it working?
>>
>>ThankŽs & Regards,
>>
>>
>>
Re: I can't add M2 Project
Posted by Trygve Laugstøl <tr...@apache.org>.
Answers inline.
When writing new mails do NOT reply to a existing thread, it's confusing
and people assume it's related to the original subject message.
On Tue, Jun 28, 2005 at 01:40:26PM +0200, Christian Schlaefcke wrote:
> Hi,
>
> I just tried to get this running now, but the SQLException is still thrown:
> [INFO] Adding XML-RPC handler for role
> 'org.apache.maven.continuum.xmlrpc.ContinuumXmlRpc to name 'continuum'.
> [INFO] The application server has started.
> setting target = Summary.vm
> target = Summary.vm
> 2005-06-28 13:32:30,468 [PoolThread-1] ERROR VelocityComponent - RHS of
> #set statement is null. Context will not be modified. screens/Summary.vm
> [line 1, column 1]
> 13:32:30.656 EVENT Started HttpContext[/]
> target = Add.vm
> 2005-06-28 13:32:39,203 [PoolThread-0] INFO
> ContinuumProjectBuilder:maven-two-builder - Downloading
> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
> 2005-06-28 13:32:39,421 [PoolThread-0] DEBUG ArtifactResolver -
> Resolving: org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
> {localRepository: [local] ->
> file://C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
> {remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
> 2005-06-28 13:32:39,437 [PoolThread-0] INFO
> ArtifactTransformation:snapshot - maven-scm: checking for updates from
> central
> 2005-06-28 13:32:39,437 [PoolThread-0] INFO WagonManager - Retrieving
> snapshot information for maven-scm 1.0-alpha-2-SNAPSHOT
> 2005-06-28 13:32:41,062 [PoolThread-0] INFO
> ArtifactTransformation:snapshot - maven-scm: resolved to version
> 1.0-alpha-2-20050627.163924-2 from repository central
This exception is a JPOX "feature". No idea why they write it out to
System.err instead of their logging facility.
> java.sql.SQLException: Table not found: SEQUENCE_TABLE in statement
> [SELECT NEXT_VAL FROM SEQUENCE_TABLE WHERE SEQUENCE_NAME=?]
> at org.hsqldb.jdbc.jdbcUtil.throwError(Unknown Source)
> at org.hsqldb.jdbc.jdbcPreparedStatement.<init>(Unknown Source)
> at org.hsqldb.jdbc.jdbcConnection.prepareStatement(Unknown Source)
> at org.jpox.store.table.SequenceTable.getNextVal(SequenceTable.java:155)
> at
> org.jpox.poid.SequenceTablePoidGenerator.reserveBlock(SequenceTablePoidGenerator.java:74)
> at org.jpox.poid.PoidManager.obtainPoidBlock(PoidManager.java:85)
> at org.jpox.poid.PoidManager.getPoidBlock(PoidManager.java:181)
> at org.jpox.poid.PoidManager.getPoid(PoidManager.java:54)
> at org.jpox.store.StoreManager.getNextOID(StoreManager.java:1301)
> at org.jpox.store.table.JDOBaseTable.newOID(JDOBaseTable.java:134)
> at org.jpox.store.StoreManager.newObjectID(StoreManager.java:1099)
> at org.jpox.state.StateManagerImpl.<init>(StateManagerImpl.java:375)
> at
> org.jpox.AbstractPersistenceManager.internalMakePersistent(AbstractPersistenceManager.java:839)
> at
> org.jpox.AbstractPersistenceManager.makePersistent(AbstractPersistenceManager.java:860)
> at
> org.apache.maven.continuum.project.ContinuumJPoxStore.addContinuumProject(ContinuumJPoxStore.java:173)
> at
> org.apache.maven.continuum.store.ModelloJPoxContinuumStore.addProject(ModelloJPoxContinuumStore.java:100)
> at
> org.apache.maven.continuum.core.DefaultContinuumCore.addProjectAndCheckOutSources(DefaultContinuumCore.java:767)
> at
> org.apache.maven.continuum.core.DefaultContinuumCore.addProjectsFromUrl(DefaultContinuumCore.java:209)
> at
> org.apache.maven.continuum.core.DefaultContinuumCore.addProjectsFromUrl(DefaultContinuumCore.java:175)
> at
> org.apache.maven.continuum.DefaultContinuum.addMavenTwoProject(DefaultContinuum.java:328)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at
> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
> at
> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
> at java.lang.reflect.Method.invoke(Method.java:324)
> at ognl.OgnlRuntime.invokeMethod(OgnlRuntime.java:255)
> at ognl.OgnlRuntime.callAppropriateMethod(OgnlRuntime.java:553)
> at ognl.ObjectMethodAccessor.callMethod(ObjectMethodAccessor.java:54)
> at ognl.OgnlRuntime.callMethod(OgnlRuntime.java:577)
> at ognl.ASTMethod.getValueBody(ASTMethod.java:84)
> at ognl.SimpleNode.getValue(SimpleNode.java:129)
> at ognl.Ognl.getValue(Ognl.java:335)
> at ognl.Ognl.getValue(Ognl.java:380)
> at ognl.Ognl.getValue(Ognl.java:359)
> at
> org.codehaus.plexus.formica.action.CallMethod.uponSuccessfulValidation(CallMethod.java:21)
> at
> org.codehaus.plexus.formica.action.AbstractEntityAction.execute(AbstractEntityAction.java:100)
> at org.codehaus.plexus.action.web.ActionValve.invoke(ActionValve.java:73)
> at
> org.codehaus.plexus.summit.pipeline.SummitPipeline.invoke(SummitPipeline.java:45)
> at org.codehaus.plexus.summit.Summit.doGet(Summit.java:37)
> at org.codehaus.plexus.summit.Summit.doPost(Summit.java:91)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:615)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:688)
> at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:358)
> at
> org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationHandler.java:294)
> at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:567)
> at org.mortbay.http.HttpContext.handle(HttpContext.java:1807)
> at
> org.mortbay.jetty.servlet.WebApplicationContext.handle(WebApplicationContext.java:525)
> at org.mortbay.http.HttpContext.handle(HttpContext.java:1757)
> at org.mortbay.http.HttpServer.service(HttpServer.java:879)
> at org.mortbay.http.HttpConnection.service(HttpConnection.java:790)
> at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:961)
> at org.mortbay.http.HttpConnection.handle(HttpConnection.java:807)
> at org.mortbay.http.SocketListener.handleConnection(SocketListener.java:218)
> at org.mortbay.util.ThreadedServer.handle(ThreadedServer.java:300)
> at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:511)
> 2005-06-28 13:32:42,171 [PoolThread-0] INFO RDBMS - Creating table
> SEQUENCE_TABLE
See, it just creates the missing sequence table after complaining about
it.
> 2005-06-28 13:32:42,296 [PoolThread-0] ERROR VelocityComponent - RHS of
> #set statement is null. Context will not be modified. screens/Summary.vm
> [line 1, column 1]
> 2005-06-28 13:32:42,328 [Thread-5] INFO ContinuumScm - Checking out
> project: 'Maven SCM Test', id: '1' to
> 'C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1'.
> 2005-06-28 13:32:42,343 [Thread-5] INFO SvnCommand:check-out - Working
> directory:
> C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
> 2005-06-28 13:32:42,343 [Thread-5] INFO SvnCommand:check-out - Command
> line: svn --non-interactive checkout
> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/ 1
> 2005-06-28 13:32:50,109 [Thread-11] INFO SvnCommand:check-out - Unknown
> file status: ' '.
> 2005-06-28 13:32:50,109 [Thread-5] INFO ContinuumScm - Checked out 0 files.
Seems to me that it added the project as expected.
--
Trygve
>
> I have just downloaded and extracted continuum and chosen add M2 project
> with the Link:
> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
>
> Do I need anything else to get it working?
>
> Thank´s & Regards,
>
Re: I can't add M2 Project
Posted by Christian Schlaefcke <cs...@wms-network.de>.
Hi,
I just tried to get this running now, but the SQLException is still thrown:
[INFO] Adding XML-RPC handler for role
'org.apache.maven.continuum.xmlrpc.ContinuumXmlRpc to name 'continuum'.
[INFO] The application server has started.
setting target = Summary.vm
target = Summary.vm
2005-06-28 13:32:30,468 [PoolThread-1] ERROR VelocityComponent - RHS of
#set statement is null. Context will not be modified. screens/Summary.vm
[line 1, column 1]
13:32:30.656 EVENT Started HttpContext[/]
target = Add.vm
2005-06-28 13:32:39,203 [PoolThread-0] INFO
ContinuumProjectBuilder:maven-two-builder - Downloading
http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
2005-06-28 13:32:39,421 [PoolThread-0] DEBUG ArtifactResolver -
Resolving: org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
{localRepository: [local] ->
file://C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
{remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
2005-06-28 13:32:39,437 [PoolThread-0] INFO
ArtifactTransformation:snapshot - maven-scm: checking for updates from
central
2005-06-28 13:32:39,437 [PoolThread-0] INFO WagonManager - Retrieving
snapshot information for maven-scm 1.0-alpha-2-SNAPSHOT
2005-06-28 13:32:41,062 [PoolThread-0] INFO
ArtifactTransformation:snapshot - maven-scm: resolved to version
1.0-alpha-2-20050627.163924-2 from repository central
java.sql.SQLException: Table not found: SEQUENCE_TABLE in statement
[SELECT NEXT_VAL FROM SEQUENCE_TABLE WHERE SEQUENCE_NAME=?]
at org.hsqldb.jdbc.jdbcUtil.throwError(Unknown Source)
at org.hsqldb.jdbc.jdbcPreparedStatement.<init>(Unknown Source)
at org.hsqldb.jdbc.jdbcConnection.prepareStatement(Unknown Source)
at org.jpox.store.table.SequenceTable.getNextVal(SequenceTable.java:155)
at
org.jpox.poid.SequenceTablePoidGenerator.reserveBlock(SequenceTablePoidGenerator.java:74)
at org.jpox.poid.PoidManager.obtainPoidBlock(PoidManager.java:85)
at org.jpox.poid.PoidManager.getPoidBlock(PoidManager.java:181)
at org.jpox.poid.PoidManager.getPoid(PoidManager.java:54)
at org.jpox.store.StoreManager.getNextOID(StoreManager.java:1301)
at org.jpox.store.table.JDOBaseTable.newOID(JDOBaseTable.java:134)
at org.jpox.store.StoreManager.newObjectID(StoreManager.java:1099)
at org.jpox.state.StateManagerImpl.<init>(StateManagerImpl.java:375)
at
org.jpox.AbstractPersistenceManager.internalMakePersistent(AbstractPersistenceManager.java:839)
at
org.jpox.AbstractPersistenceManager.makePersistent(AbstractPersistenceManager.java:860)
at
org.apache.maven.continuum.project.ContinuumJPoxStore.addContinuumProject(ContinuumJPoxStore.java:173)
at
org.apache.maven.continuum.store.ModelloJPoxContinuumStore.addProject(ModelloJPoxContinuumStore.java:100)
at
org.apache.maven.continuum.core.DefaultContinuumCore.addProjectAndCheckOutSources(DefaultContinuumCore.java:767)
at
org.apache.maven.continuum.core.DefaultContinuumCore.addProjectsFromUrl(DefaultContinuumCore.java:209)
at
org.apache.maven.continuum.core.DefaultContinuumCore.addProjectsFromUrl(DefaultContinuumCore.java:175)
at
org.apache.maven.continuum.DefaultContinuum.addMavenTwoProject(DefaultContinuum.java:328)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at ognl.OgnlRuntime.invokeMethod(OgnlRuntime.java:255)
at ognl.OgnlRuntime.callAppropriateMethod(OgnlRuntime.java:553)
at ognl.ObjectMethodAccessor.callMethod(ObjectMethodAccessor.java:54)
at ognl.OgnlRuntime.callMethod(OgnlRuntime.java:577)
at ognl.ASTMethod.getValueBody(ASTMethod.java:84)
at ognl.SimpleNode.getValue(SimpleNode.java:129)
at ognl.Ognl.getValue(Ognl.java:335)
at ognl.Ognl.getValue(Ognl.java:380)
at ognl.Ognl.getValue(Ognl.java:359)
at
org.codehaus.plexus.formica.action.CallMethod.uponSuccessfulValidation(CallMethod.java:21)
at
org.codehaus.plexus.formica.action.AbstractEntityAction.execute(AbstractEntityAction.java:100)
at org.codehaus.plexus.action.web.ActionValve.invoke(ActionValve.java:73)
at
org.codehaus.plexus.summit.pipeline.SummitPipeline.invoke(SummitPipeline.java:45)
at org.codehaus.plexus.summit.Summit.doGet(Summit.java:37)
at org.codehaus.plexus.summit.Summit.doPost(Summit.java:91)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:615)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:688)
at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:358)
at
org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationHandler.java:294)
at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:567)
at org.mortbay.http.HttpContext.handle(HttpContext.java:1807)
at
org.mortbay.jetty.servlet.WebApplicationContext.handle(WebApplicationContext.java:525)
at org.mortbay.http.HttpContext.handle(HttpContext.java:1757)
at org.mortbay.http.HttpServer.service(HttpServer.java:879)
at org.mortbay.http.HttpConnection.service(HttpConnection.java:790)
at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:961)
at org.mortbay.http.HttpConnection.handle(HttpConnection.java:807)
at org.mortbay.http.SocketListener.handleConnection(SocketListener.java:218)
at org.mortbay.util.ThreadedServer.handle(ThreadedServer.java:300)
at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:511)
2005-06-28 13:32:42,171 [PoolThread-0] INFO RDBMS - Creating table
SEQUENCE_TABLE
2005-06-28 13:32:42,296 [PoolThread-0] ERROR VelocityComponent - RHS of
#set statement is null. Context will not be modified. screens/Summary.vm
[line 1, column 1]
2005-06-28 13:32:42,328 [Thread-5] INFO ContinuumScm - Checking out
project: 'Maven SCM Test', id: '1' to
'C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1'.
2005-06-28 13:32:42,343 [Thread-5] INFO SvnCommand:check-out - Working
directory:
C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
2005-06-28 13:32:42,343 [Thread-5] INFO SvnCommand:check-out - Command
line: svn --non-interactive checkout
http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/ 1
2005-06-28 13:32:50,109 [Thread-11] INFO SvnCommand:check-out - Unknown
file status: ' '.
2005-06-28 13:32:50,109 [Thread-5] INFO ContinuumScm - Checked out 0 files.
I have just downloaded and extracted continuum and chosen add M2 project
with the Link:
http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
Do I need anything else to get it working?
Thank´s & Regards,
Christian
Trygve Laugstøl schrieb:
>On Tue, Jun 28, 2005 at 08:09:20AM +0800, Johnny Ruiz wrote:
>
>
>>I've tried the POM that you mentioned and it can be successfully added
>>now. But I think you still need to include CVS and SVN in your path
>>because Continuum needs them.
>>
>>74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>>Command output: 'cvs' is not recognized as an internal or external command,
>>operable program or batch file. -- this occur when CVS is not in your
>>path.
>>
>>
>
>Continuum will only need SVN (now) but we're working on a better way of
>giving this feedback to the users.
>
>--
>Trygve
>
>
Re: I can't add M2 Project
Posted by Trygve Laugstøl <tr...@apache.org>.
On Tue, Jun 28, 2005 at 08:09:20AM +0800, Johnny Ruiz wrote:
> I've tried the POM that you mentioned and it can be successfully added
> now. But I think you still need to include CVS and SVN in your path
> because Continuum needs them.
>
> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
> Command output: 'cvs' is not recognized as an internal or external command,
> operable program or batch file. -- this occur when CVS is not in your
> path.
Continuum will only need SVN (now) but we're working on a better way of
giving this feedback to the users.
--
Trygve
Re: I can't add M2 Project
Posted by Johnny Ruiz <jr...@exist.com>.
Christian Schlaefcke wrote:
> Hi Folks,
>
> I also have a problem depending on this. When I try to get the URL
> "http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml"
> which is obviously subversion I get this
> <snip>
> 2005-06-27 15:15:52,718 [PoolThread-0] INFO
> ContinuumProjectBuilder:maven-two-builder - Downloading
> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
> 2005-06-27 15:15:52,937 [PoolThread-0] DEBUG ArtifactResolver -
> Resolving: org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
> {localRepository: [local] ->
> file://C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
>
> {remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
> 2005-06-27 15:15:52,937 [PoolThread-0] INFO
> ArtifactTransformation:snapshot - maven-scm: checking for updates from
> central
> 2005-
> 06-27 15:15:52,937 [PoolThread-0] INFO WagonManager - Retrieving
> snapshot information for maven-scm 1.0-alpha-2-SNAPSHOT
> 2005-06-27 15:15:53,890 [PoolThread-0] INFO
> ArtifactTransformation:snapshot - maven-scm: resolved to version
> 1.0-alpha-2-20050610.043511-1 from repository central
> java.sql.SQLException: Table not found: SEQUENCE_TABLE in statement
> [SELECT NEXT_VAL FROM SEQUENCE_TABLE WHERE SEQUENCE_NAME=?]
> at org.hsqldb.jdbc.jdbcUtil.throwError(Unknown Source)
> </snip>
> followed by a long stacktrace and this:
>
> <snip>
> 2005-06-27 15:15:54,984 [PoolThread-0] INFO RDBMS - Creating table
> SEQUENCE_TABLE
> 2005-06-27 15:15:55,140 [PoolThread-0] ERROR VelocityComponent - RHS
> of #set statement is null. Context will not be modified.
> screens/Summary.vm [line 1, column 1]
> 2005-06-27 15:15:55,187 [Thread-5] INFO ContinuumScm - Checking out
> project: 'Maven SCM Test', id: '1' to
> 'C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1'.
> cl = cvs -f -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic -q
> checkout -d 1 maven-scm
> 2005-06-27 15:15:55,218 [Thread-5] DEBUG CvsCommand:check-out -
> Working directory:
> C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
> 2005-06-27 15:15:55,218 [Thread-5] DEBUG CvsCommand:check-out -
> Command line: cvs -f -d
> :pserver:anoncvs@cvs.apache.org:/home/cvspublic -q checkout -d 1
> maven-scm
> 2005-06-27 15:15:57,937 [Thread-5] WARN ContinuumScm - Error while
> checking out the code for project: 'Maven SCM Test', id: '1' to
> 'C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1'.
> 2005-06-27 15:15:57,937 [Thread-5] WARN ContinuumScm - Command output:
> cvs checkout:
> cwd=C:\Programme\Java\continuum-1.0-alpha-2\apps\continuum\temp
> ,current=C:\Programme\Java\continuum-1.0-alpha-2\apps\continuum\temp
> cvs server: cannot find module `maven-scm' - ignored
> cvs [checkout aborted]: cannot expand modules
>
> 2005-06-27 15:15:57,937 [Thread-5] WARN ContinuumScm - Provider
> message: The cvs command failed.
> </snip>
>
> Why is it trying to get it from cvs when it is an svn repository?
> Looks like it´s redirecting me somehow. What am I missing/doing wrong?
>
> Thanks & Regards,
>
> Christian
>
>
> Johnny R. Ruiz III schrieb:
>
>> Emmanuel Venisse wrote:
>>
>>> cvs isn't in your path
>>>
>>> Emmanuel
>>>
>>> Johnny R. Ruiz III wrote:
>>>
>>>> Trygve Laugstøl wrote:
>>>>
>>>>> On Thu, Jun 23, 2005 at 04:17:31PM +0800, Johnny R. Ruiz III wrote:
>>>>>
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> I successfully installed Continuum1.0-alpha-2 in my laptop. I
>>>>>> launch continuum using a Web Browser and tried to add an M2 project.
>>>>>> The POM that I used was
>>>>>> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml.
>>>>>> There was an error on adding this project. The result is:
>>>>>>
>>>>>> org.apache.maven.continuum.scm.ContinuumScmException: Error while
>>>>>> checking out the project.
>>>>>> at
>>>>>> org.apache.maven.continuum.scm.DefaultContinuumScm.checkOut(DefaultContinuumScm.java:84)
>>>>>>
>>>>>> at
>>>>>> org.apache.maven.continuum.scm.queue.CheckOutTaskExecutor.executeTask(CheckOutTaskExecutor.java:80)
>>>>>>
>>>>>> at
>>>>>> org.codehaus.plexus.taskqueue.execution.ThreadedTaskQueueExecutor$ExecutorRunnable.run(ThreadedTaskQueueExecutor.java:100)
>>>>>>
>>>>>> at java.lang.Thread.run(Thread.java:534)
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Are there anything else in the logs?
>>>>>
>>>>> --
>>>>> Trygve
>>>>>
>>>>>
>>>>>
>>>>>> Anyone have an idea on the problem?
>>>>>>
>>>>>> Thanks a lot -- jruiz
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> Here's what I got from the log file.
>>>> 5478 [main] ERROR org.codehaus.plexus.velocity.VelocityComponent -
>>>> VM #text: error : too few arguments to macro. Wanted 2 got 0
>>>> 5498 [main] INFO
>>>> org.codehaus.plexus.notification.notifier.Notifier:mail - The from
>>>> mailbox is not configured, will use the nag email address from the
>>>> project.
>>>> 5508 [main] INFO
>>>> org.codehaus.plexus.notification.notifier.Notifier:mail - From
>>>> name: Continuum@Lyndsay
>>>> 5508 [main] INFO org.codehaus.plexus.notification.RecipientSource -
>>>> To override address is not configured, will use the nag email
>>>> address from the project.
>>>> 5508 [main] INFO
>>>> org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:build-project
>>>> - Starting task executor, thread name 'build-project'.
>>>> 5508 [main] INFO org.codehaus.plexus.PlexusContainer - Loading on
>>>> start [role,roleHint]:
>>>> [org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor,check-out-project]
>>>>
>>>> 5518 [main] INFO
>>>> org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:check-out-project
>>>> - Starting task executor, thread name 'check-out-project'.
>>>> 61809 [PoolThread-1] INFO
>>>> org.apache.maven.continuum.store.ContinuumStore - Removed project
>>>> with id '16'.
>>>> 61869 [PoolThread-1] ERROR
>>>> org.codehaus.plexus.velocity.VelocityComponent - RHS of #set
>>>> statement is null. Context will not be modified. screens/Summary.vm
>>>> [line 1, column 1]
>>>> 73556 [PoolThread-1] INFO
>>>> org.apache.maven.continuum.project.builder.ContinuumProjectBuilder:maven-two-builder
>>>> - Downloading
>>>> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
>>>> 74097 [PoolThread-1] DEBUG
>>>> org.apache.maven.artifact.resolver.ArtifactResolver - Resolving:
>>>> org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
>>>> {localRepository: [local] ->
>>>> file://C:\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
>>>>
>>>> {remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
>>>> 74117 [PoolThread-1] INFO
>>>> org.apache.maven.artifact.transform.ArtifactTransformation:snapshot
>>>> - maven-scm: resolved to version 1.0-alpha-2-20050610.043511-1 from
>>>> local repository
>>>> 74387 [Thread-5] INFO org.apache.maven.continuum.scm.ContinuumScm -
>>>> Checking out project: 'Maven SCM Test', id: '21' to
>>>> 'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
>>>> 74457 [Thread-5] DEBUG
>>>> org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
>>>> Working directory:
>>>> C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21
>>>> 74457 [Thread-5] DEBUG
>>>> org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
>>>> Command line: cvs -f -d
>>>> :pserver:anoncvs@cvs.apache.org:/home/cvspublic -q checkout -d 21
>>>> maven-scm
>>>> 74477 [PoolThread-1] ERROR
>>>> org.codehaus.plexus.velocity.VelocityComponent - RHS of #set
>>>> statement is null. Context will not be modified. screens/Summary.vm
>>>> [line 1, column 1]
>>>> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>>>> Error while checking out the code for project: 'Maven SCM Test',
>>>> id: '21' to 'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
>>>> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>>>> Command output: 'cvs' is not recognized as an internal or external
>>>> command,
>>>> operable program or batch file.
>>>>
>>>> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>>>> Provider message: The cvs command failed.
>>>>
>>>> tnx - jruiz
>>>>
>>>>
>>>
>> Thanks a lot dude! :)
>>
>
>
I've tried the POM that you mentioned and it can be successfully added
now. But I think you still need to include CVS and SVN in your path
because Continuum needs them.
74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
Command output: 'cvs' is not recognized as an internal or external command,
operable program or batch file. -- this occur when CVS is not in your
path.
Re: I can't add M2 Project
Posted by Emmanuel Venisse <em...@venisse.net>.
>>06-27 15:15:52,937 [PoolThread-0] INFO WagonManager - Retrieving
>>snapshot information for maven-scm 1.0-alpha-2-SNAPSHOT
>
>
> Notice this line. It's downloading the parent pom with artifact id
> "maven-scm" and version "1.0-alpha-2-SNAPSHOT".
> http://ibiblio.org/maven2/org/apache/maven/scm/maven-scm/1.0-alpha-2-SNAPSHOT/maven-scm-1.0-alpha-2-20050610.043511-1.pom
>
> And this that pom you'll see:
>
> <scm>
> <connection>scm:cvs:pserver:anoncvs@cvs.apache.org:/home/cvspublic:maven-scm</connection>
> <developerConnection>scm:cvs:ext:${maven.username}@cvs.apache.org:/home/cvs:maven-scm</developerConnection>
> <url>http://cvs.apache.org/viewcvs.cgi/maven-scm</url>
> </scm>
>
> which should explain why it's going to cvs. We'll update this POM asap.
>
The pom is fixed.
Emmanuel
Re: I can't add M2 Project
Posted by Trygve Laugstøl <tr...@codehaus.org>.
Answers inline.
On Mon, Jun 27, 2005 at 03:20:59PM +0200, Christian Schlaefcke wrote:
> Hi Folks,
>
> I also have a problem depending on this. When I try to get the URL
> "http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml"
> which is obviously subversion I get this
> <snip>
> 2005-06-27 15:15:52,718 [PoolThread-0] INFO
> ContinuumProjectBuilder:maven-two-builder - Downloading
> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
> 2005-06-27 15:15:52,937 [PoolThread-0] DEBUG ArtifactResolver -
> Resolving: org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
> {localRepository: [local] ->
> file://C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
> {remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
> 2005-06-27 15:15:52,937 [PoolThread-0] INFO
> ArtifactTransformation:snapshot - maven-scm: checking for updates from
> central
> 2005-
> 06-27 15:15:52,937 [PoolThread-0] INFO WagonManager - Retrieving
> snapshot information for maven-scm 1.0-alpha-2-SNAPSHOT
Notice this line. It's downloading the parent pom with artifact id
"maven-scm" and version "1.0-alpha-2-SNAPSHOT".
http://ibiblio.org/maven2/org/apache/maven/scm/maven-scm/1.0-alpha-2-SNAPSHOT/maven-scm-1.0-alpha-2-20050610.043511-1.pom
And this that pom you'll see:
<scm>
<connection>scm:cvs:pserver:anoncvs@cvs.apache.org:/home/cvspublic:maven-scm</connection>
<developerConnection>scm:cvs:ext:${maven.username}@cvs.apache.org:/home/cvs:maven-scm</developerConnection>
<url>http://cvs.apache.org/viewcvs.cgi/maven-scm</url>
</scm>
which should explain why it's going to cvs. We'll update this POM asap.
> 2005-06-27 15:15:53,890 [PoolThread-0] INFO
> ArtifactTransformation:snapshot - maven-scm: resolved to version
> 1.0-alpha-2-20050610.043511-1 from repository central
> java.sql.SQLException: Table not found: SEQUENCE_TABLE in statement
> [SELECT NEXT_VAL FROM SEQUENCE_TABLE WHERE SEQUENCE_NAME=?]
> at org.hsqldb.jdbc.jdbcUtil.throwError(Unknown Source)
> </snip>
> followed by a long stacktrace and this:
>
> <snip>
> 2005-06-27 15:15:54,984 [PoolThread-0] INFO RDBMS - Creating table
> SEQUENCE_TABLE
> 2005-06-27 15:15:55,140 [PoolThread-0] ERROR VelocityComponent - RHS of
> #set statement is null. Context will not be modified. screens/Summary.vm
> [line 1, column 1]
> 2005-06-27 15:15:55,187 [Thread-5] INFO ContinuumScm - Checking out
> project: 'Maven SCM Test', id: '1' to
> 'C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1'.
> cl = cvs -f -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic -q
> checkout -d 1 maven-scm
> 2005-06-27 15:15:55,218 [Thread-5] DEBUG CvsCommand:check-out - Working
> directory:
> C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
> 2005-06-27 15:15:55,218 [Thread-5] DEBUG CvsCommand:check-out - Command
> line: cvs -f -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic -q
> checkout -d 1 maven-scm
> 2005-06-27 15:15:57,937 [Thread-5] WARN ContinuumScm - Error while
> checking out the code for project: 'Maven SCM Test', id: '1' to
> 'C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1'.
> 2005-06-27 15:15:57,937 [Thread-5] WARN ContinuumScm - Command output:
> cvs checkout:
> cwd=C:\Programme\Java\continuum-1.0-alpha-2\apps\continuum\temp
> ,current=C:\Programme\Java\continuum-1.0-alpha-2\apps\continuum\temp
> cvs server: cannot find module `maven-scm' - ignored
> cvs [checkout aborted]: cannot expand modules
>
> 2005-06-27 15:15:57,937 [Thread-5] WARN ContinuumScm - Provider message:
> The cvs command failed.
> </snip>
>
> Why is it trying to get it from cvs when it is an svn repository? Looks
> like it´s redirecting me somehow. What am I missing/doing wrong?
>
> Thanks & Regards,
>
> Christian
--
Trygve
Re: I can't add M2 Project
Posted by Christian Schlaefcke <cs...@wms-network.de>.
Hi Folks,
I also have a problem depending on this. When I try to get the URL
"http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml"
which is obviously subversion I get this
<snip>
2005-06-27 15:15:52,718 [PoolThread-0] INFO
ContinuumProjectBuilder:maven-two-builder - Downloading
http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
2005-06-27 15:15:52,937 [PoolThread-0] DEBUG ArtifactResolver -
Resolving: org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
{localRepository: [local] ->
file://C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
{remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
2005-06-27 15:15:52,937 [PoolThread-0] INFO
ArtifactTransformation:snapshot - maven-scm: checking for updates from
central
2005-
06-27 15:15:52,937 [PoolThread-0] INFO WagonManager - Retrieving
snapshot information for maven-scm 1.0-alpha-2-SNAPSHOT
2005-06-27 15:15:53,890 [PoolThread-0] INFO
ArtifactTransformation:snapshot - maven-scm: resolved to version
1.0-alpha-2-20050610.043511-1 from repository central
java.sql.SQLException: Table not found: SEQUENCE_TABLE in statement
[SELECT NEXT_VAL FROM SEQUENCE_TABLE WHERE SEQUENCE_NAME=?]
at org.hsqldb.jdbc.jdbcUtil.throwError(Unknown Source)
</snip>
followed by a long stacktrace and this:
<snip>
2005-06-27 15:15:54,984 [PoolThread-0] INFO RDBMS - Creating table
SEQUENCE_TABLE
2005-06-27 15:15:55,140 [PoolThread-0] ERROR VelocityComponent - RHS of
#set statement is null. Context will not be modified. screens/Summary.vm
[line 1, column 1]
2005-06-27 15:15:55,187 [Thread-5] INFO ContinuumScm - Checking out
project: 'Maven SCM Test', id: '1' to
'C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1'.
cl = cvs -f -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic -q
checkout -d 1 maven-scm
2005-06-27 15:15:55,218 [Thread-5] DEBUG CvsCommand:check-out - Working
directory:
C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1
2005-06-27 15:15:55,218 [Thread-5] DEBUG CvsCommand:check-out - Command
line: cvs -f -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic -q
checkout -d 1 maven-scm
2005-06-27 15:15:57,937 [Thread-5] WARN ContinuumScm - Error while
checking out the code for project: 'Maven SCM Test', id: '1' to
'C:\Programme\Java\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\1'.
2005-06-27 15:15:57,937 [Thread-5] WARN ContinuumScm - Command output:
cvs checkout:
cwd=C:\Programme\Java\continuum-1.0-alpha-2\apps\continuum\temp
,current=C:\Programme\Java\continuum-1.0-alpha-2\apps\continuum\temp
cvs server: cannot find module `maven-scm' - ignored
cvs [checkout aborted]: cannot expand modules
2005-06-27 15:15:57,937 [Thread-5] WARN ContinuumScm - Provider message:
The cvs command failed.
</snip>
Why is it trying to get it from cvs when it is an svn repository? Looks
like it´s redirecting me somehow. What am I missing/doing wrong?
Thanks & Regards,
Christian
Johnny R. Ruiz III schrieb:
> Emmanuel Venisse wrote:
>
>> cvs isn't in your path
>>
>> Emmanuel
>>
>> Johnny R. Ruiz III wrote:
>>
>>> Trygve Laugstøl wrote:
>>>
>>>> On Thu, Jun 23, 2005 at 04:17:31PM +0800, Johnny R. Ruiz III wrote:
>>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> I successfully installed Continuum1.0-alpha-2 in my laptop. I
>>>>> launch continuum using a Web Browser and tried to add an M2 project.
>>>>> The POM that I used was
>>>>> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml.
>>>>> There was an error on adding this project. The result is:
>>>>>
>>>>> org.apache.maven.continuum.scm.ContinuumScmException: Error while
>>>>> checking out the project.
>>>>> at
>>>>> org.apache.maven.continuum.scm.DefaultContinuumScm.checkOut(DefaultContinuumScm.java:84)
>>>>>
>>>>> at
>>>>> org.apache.maven.continuum.scm.queue.CheckOutTaskExecutor.executeTask(CheckOutTaskExecutor.java:80)
>>>>>
>>>>> at
>>>>> org.codehaus.plexus.taskqueue.execution.ThreadedTaskQueueExecutor$ExecutorRunnable.run(ThreadedTaskQueueExecutor.java:100)
>>>>>
>>>>> at java.lang.Thread.run(Thread.java:534)
>>>>>
>>>>
>>>>
>>>>
>>>> Are there anything else in the logs?
>>>>
>>>> --
>>>> Trygve
>>>>
>>>>
>>>>
>>>>> Anyone have an idea on the problem?
>>>>>
>>>>> Thanks a lot -- jruiz
>>>>>
>>>>>
>>>>
>>>
>>> Here's what I got from the log file.
>>> 5478 [main] ERROR org.codehaus.plexus.velocity.VelocityComponent -
>>> VM #text: error : too few arguments to macro. Wanted 2 got 0
>>> 5498 [main] INFO
>>> org.codehaus.plexus.notification.notifier.Notifier:mail - The from
>>> mailbox is not configured, will use the nag email address from the
>>> project.
>>> 5508 [main] INFO
>>> org.codehaus.plexus.notification.notifier.Notifier:mail - From name:
>>> Continuum@Lyndsay
>>> 5508 [main] INFO org.codehaus.plexus.notification.RecipientSource -
>>> To override address is not configured, will use the nag email
>>> address from the project.
>>> 5508 [main] INFO
>>> org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:build-project
>>> - Starting task executor, thread name 'build-project'.
>>> 5508 [main] INFO org.codehaus.plexus.PlexusContainer - Loading on
>>> start [role,roleHint]:
>>> [org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor,check-out-project]
>>>
>>> 5518 [main] INFO
>>> org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:check-out-project
>>> - Starting task executor, thread name 'check-out-project'.
>>> 61809 [PoolThread-1] INFO
>>> org.apache.maven.continuum.store.ContinuumStore - Removed project
>>> with id '16'.
>>> 61869 [PoolThread-1] ERROR
>>> org.codehaus.plexus.velocity.VelocityComponent - RHS of #set
>>> statement is null. Context will not be modified. screens/Summary.vm
>>> [line 1, column 1]
>>> 73556 [PoolThread-1] INFO
>>> org.apache.maven.continuum.project.builder.ContinuumProjectBuilder:maven-two-builder
>>> - Downloading
>>> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
>>> 74097 [PoolThread-1] DEBUG
>>> org.apache.maven.artifact.resolver.ArtifactResolver - Resolving:
>>> org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
>>> {localRepository: [local] ->
>>> file://C:\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
>>> {remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
>>> 74117 [PoolThread-1] INFO
>>> org.apache.maven.artifact.transform.ArtifactTransformation:snapshot
>>> - maven-scm: resolved to version 1.0-alpha-2-20050610.043511-1 from
>>> local repository
>>> 74387 [Thread-5] INFO org.apache.maven.continuum.scm.ContinuumScm -
>>> Checking out project: 'Maven SCM Test', id: '21' to
>>> 'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
>>> 74457 [Thread-5] DEBUG
>>> org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
>>> Working directory:
>>> C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21
>>> 74457 [Thread-5] DEBUG
>>> org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
>>> Command line: cvs -f -d
>>> :pserver:anoncvs@cvs.apache.org:/home/cvspublic -q checkout -d 21
>>> maven-scm
>>> 74477 [PoolThread-1] ERROR
>>> org.codehaus.plexus.velocity.VelocityComponent - RHS of #set
>>> statement is null. Context will not be modified. screens/Summary.vm
>>> [line 1, column 1]
>>> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>>> Error while checking out the code for project: 'Maven SCM Test', id:
>>> '21' to 'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
>>> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>>> Command output: 'cvs' is not recognized as an internal or external
>>> command,
>>> operable program or batch file.
>>>
>>> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>>> Provider message: The cvs command failed.
>>>
>>> tnx - jruiz
>>>
>>>
>>
> Thanks a lot dude! :)
>
Re: I can't add M2 Project
Posted by "Johnny R. Ruiz III" <jr...@exist.com>.
Emmanuel Venisse wrote:
> cvs isn't in your path
>
> Emmanuel
>
> Johnny R. Ruiz III wrote:
>
>> Trygve Laugstøl wrote:
>>
>>> On Thu, Jun 23, 2005 at 04:17:31PM +0800, Johnny R. Ruiz III wrote:
>>>
>>>
>>>> Hi,
>>>>
>>>> I successfully installed Continuum1.0-alpha-2 in my laptop. I
>>>> launch continuum using a Web Browser and tried to add an M2 project.
>>>> The POM that I used was
>>>> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml.
>>>> There was an error on adding this project. The result is:
>>>>
>>>> org.apache.maven.continuum.scm.ContinuumScmException: Error while
>>>> checking out the project.
>>>> at
>>>> org.apache.maven.continuum.scm.DefaultContinuumScm.checkOut(DefaultContinuumScm.java:84)
>>>>
>>>> at
>>>> org.apache.maven.continuum.scm.queue.CheckOutTaskExecutor.executeTask(CheckOutTaskExecutor.java:80)
>>>>
>>>> at
>>>> org.codehaus.plexus.taskqueue.execution.ThreadedTaskQueueExecutor$ExecutorRunnable.run(ThreadedTaskQueueExecutor.java:100)
>>>>
>>>> at java.lang.Thread.run(Thread.java:534)
>>>>
>>>>
>>>
>>>
>>>
>>> Are there anything else in the logs?
>>>
>>> --
>>> Trygve
>>>
>>>
>>>
>>>> Anyone have an idea on the problem?
>>>>
>>>> Thanks a lot -- jruiz
>>>>
>>>>
>>>>
>>>
>>
>> Here's what I got from the log file.
>> 5478 [main] ERROR org.codehaus.plexus.velocity.VelocityComponent -
>> VM #text: error : too few arguments to macro. Wanted 2 got 0
>> 5498 [main] INFO
>> org.codehaus.plexus.notification.notifier.Notifier:mail - The from
>> mailbox is not configured, will use the nag email address from the
>> project.
>> 5508 [main] INFO
>> org.codehaus.plexus.notification.notifier.Notifier:mail - From name:
>> Continuum@Lyndsay
>> 5508 [main] INFO org.codehaus.plexus.notification.RecipientSource -
>> To override address is not configured, will use the nag email address
>> from the project.
>> 5508 [main] INFO
>> org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:build-project
>> - Starting task executor, thread name 'build-project'.
>> 5508 [main] INFO org.codehaus.plexus.PlexusContainer - Loading on
>> start [role,roleHint]:
>> [org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor,check-out-project]
>>
>> 5518 [main] INFO
>> org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:check-out-project
>> - Starting task executor, thread name 'check-out-project'.
>> 61809 [PoolThread-1] INFO
>> org.apache.maven.continuum.store.ContinuumStore - Removed project
>> with id '16'.
>> 61869 [PoolThread-1] ERROR
>> org.codehaus.plexus.velocity.VelocityComponent - RHS of #set
>> statement is null. Context will not be modified. screens/Summary.vm
>> [line 1, column 1]
>> 73556 [PoolThread-1] INFO
>> org.apache.maven.continuum.project.builder.ContinuumProjectBuilder:maven-two-builder
>> - Downloading
>> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
>> 74097 [PoolThread-1] DEBUG
>> org.apache.maven.artifact.resolver.ArtifactResolver - Resolving:
>> org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
>> {localRepository: [local] ->
>> file://C:\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
>> {remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
>> 74117 [PoolThread-1] INFO
>> org.apache.maven.artifact.transform.ArtifactTransformation:snapshot
>> - maven-scm: resolved to version 1.0-alpha-2-20050610.043511-1 from
>> local repository
>> 74387 [Thread-5] INFO org.apache.maven.continuum.scm.ContinuumScm -
>> Checking out project: 'Maven SCM Test', id: '21' to
>> 'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
>> 74457 [Thread-5] DEBUG
>> org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
>> Working directory:
>> C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21
>> 74457 [Thread-5] DEBUG
>> org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
>> Command line: cvs -f -d
>> :pserver:anoncvs@cvs.apache.org:/home/cvspublic -q checkout -d 21
>> maven-scm
>> 74477 [PoolThread-1] ERROR
>> org.codehaus.plexus.velocity.VelocityComponent - RHS of #set
>> statement is null. Context will not be modified. screens/Summary.vm
>> [line 1, column 1]
>> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>> Error while checking out the code for project: 'Maven SCM Test', id:
>> '21' to 'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
>> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>> Command output: 'cvs' is not recognized as an internal or external
>> command,
>> operable program or batch file.
>>
>> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
>> Provider message: The cvs command failed.
>>
>> tnx - jruiz
>>
>>
>
Thanks a lot dude! :)
Re: I can't add M2 Project
Posted by Emmanuel Venisse <em...@venisse.net>.
cvs isn't in your path
Emmanuel
Johnny R. Ruiz III wrote:
> Trygve Laugstøl wrote:
>
>> On Thu, Jun 23, 2005 at 04:17:31PM +0800, Johnny R. Ruiz III wrote:
>>
>>
>>> Hi,
>>>
>>> I successfully installed Continuum1.0-alpha-2 in my laptop. I launch
>>> continuum using a Web Browser and tried to add an M2 project.
>>> The POM that I used was
>>> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml.
>>> There was an error on adding this project. The result is:
>>>
>>> org.apache.maven.continuum.scm.ContinuumScmException: Error while
>>> checking out the project.
>>> at
>>> org.apache.maven.continuum.scm.DefaultContinuumScm.checkOut(DefaultContinuumScm.java:84)
>>>
>>> at
>>> org.apache.maven.continuum.scm.queue.CheckOutTaskExecutor.executeTask(CheckOutTaskExecutor.java:80)
>>>
>>> at
>>> org.codehaus.plexus.taskqueue.execution.ThreadedTaskQueueExecutor$ExecutorRunnable.run(ThreadedTaskQueueExecutor.java:100)
>>>
>>> at java.lang.Thread.run(Thread.java:534)
>>>
>>>
>>
>>
>> Are there anything else in the logs?
>>
>> --
>> Trygve
>>
>>
>>
>>> Anyone have an idea on the problem?
>>>
>>> Thanks a lot -- jruiz
>>>
>>>
>>>
>
> Here's what I got from the log file.
> 5478 [main] ERROR org.codehaus.plexus.velocity.VelocityComponent - VM
> #text: error : too few arguments to macro. Wanted 2 got 0
> 5498 [main] INFO
> org.codehaus.plexus.notification.notifier.Notifier:mail - The from
> mailbox is not configured, will use the nag email address from the project.
> 5508 [main] INFO
> org.codehaus.plexus.notification.notifier.Notifier:mail - From name:
> Continuum@Lyndsay
> 5508 [main] INFO org.codehaus.plexus.notification.RecipientSource - To
> override address is not configured, will use the nag email address from
> the project.
> 5508 [main] INFO
> org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:build-project
> - Starting task executor, thread name 'build-project'.
> 5508 [main] INFO org.codehaus.plexus.PlexusContainer - Loading on
> start [role,roleHint]:
> [org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor,check-out-project]
>
> 5518 [main] INFO
> org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:check-out-project
> - Starting task executor, thread name 'check-out-project'.
> 61809 [PoolThread-1] INFO
> org.apache.maven.continuum.store.ContinuumStore - Removed project with
> id '16'.
> 61869 [PoolThread-1] ERROR
> org.codehaus.plexus.velocity.VelocityComponent - RHS of #set statement
> is null. Context will not be modified. screens/Summary.vm [line 1,
> column 1]
> 73556 [PoolThread-1] INFO
> org.apache.maven.continuum.project.builder.ContinuumProjectBuilder:maven-two-builder
> - Downloading
> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
> 74097 [PoolThread-1] DEBUG
> org.apache.maven.artifact.resolver.ArtifactResolver - Resolving:
> org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
> {localRepository: [local] ->
> file://C:\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
> {remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
> 74117 [PoolThread-1] INFO
> org.apache.maven.artifact.transform.ArtifactTransformation:snapshot -
> maven-scm: resolved to version 1.0-alpha-2-20050610.043511-1 from local
> repository
> 74387 [Thread-5] INFO org.apache.maven.continuum.scm.ContinuumScm -
> Checking out project: 'Maven SCM Test', id: '21' to
> 'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
> 74457 [Thread-5] DEBUG
> org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
> Working directory: C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21
> 74457 [Thread-5] DEBUG
> org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
> Command line: cvs -f -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic
> -q checkout -d 21 maven-scm
> 74477 [PoolThread-1] ERROR
> org.codehaus.plexus.velocity.VelocityComponent - RHS of #set statement
> is null. Context will not be modified. screens/Summary.vm [line 1,
> column 1]
> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
> Error while checking out the code for project: 'Maven SCM Test', id:
> '21' to 'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
> Command output: 'cvs' is not recognized as an internal or external command,
> operable program or batch file.
>
> 74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
> Provider message: The cvs command failed.
>
> tnx - jruiz
>
>
Re: I can't add M2 Project
Posted by "Johnny R. Ruiz III" <jr...@exist.com>.
Trygve Laugstøl wrote:
>On Thu, Jun 23, 2005 at 04:17:31PM +0800, Johnny R. Ruiz III wrote:
>
>
>>Hi,
>>
>>I successfully installed Continuum1.0-alpha-2 in my laptop. I launch
>>continuum using a Web Browser and tried to add an M2 project.
>>The POM that I used was
>>http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml.
>>
>>There was an error on adding this project. The result is:
>>
>>org.apache.maven.continuum.scm.ContinuumScmException: Error while
>>checking out the project.
>> at
>>org.apache.maven.continuum.scm.DefaultContinuumScm.checkOut(DefaultContinuumScm.java:84)
>> at
>>org.apache.maven.continuum.scm.queue.CheckOutTaskExecutor.executeTask(CheckOutTaskExecutor.java:80)
>> at
>>org.codehaus.plexus.taskqueue.execution.ThreadedTaskQueueExecutor$ExecutorRunnable.run(ThreadedTaskQueueExecutor.java:100)
>> at java.lang.Thread.run(Thread.java:534)
>>
>>
>>
>
>Are there anything else in the logs?
>
>--
>Trygve
>
>
>
>>Anyone have an idea on the problem?
>>
>>Thanks a lot -- jruiz
>>
>>
>>
>>
Here's what I got from the log file.
5478 [main] ERROR org.codehaus.plexus.velocity.VelocityComponent - VM
#text: error : too few arguments to macro. Wanted 2 got 0
5498 [main] INFO
org.codehaus.plexus.notification.notifier.Notifier:mail - The from
mailbox is not configured, will use the nag email address from the project.
5508 [main] INFO
org.codehaus.plexus.notification.notifier.Notifier:mail - From name:
Continuum@Lyndsay
5508 [main] INFO org.codehaus.plexus.notification.RecipientSource - To
override address is not configured, will use the nag email address from
the project.
5508 [main] INFO
org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:build-project
- Starting task executor, thread name 'build-project'.
5508 [main] INFO org.codehaus.plexus.PlexusContainer - Loading on
start [role,roleHint]:
[org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor,check-out-project]
5518 [main] INFO
org.codehaus.plexus.taskqueue.execution.TaskQueueExecutor:check-out-project
- Starting task executor, thread name 'check-out-project'.
61809 [PoolThread-1] INFO
org.apache.maven.continuum.store.ContinuumStore - Removed project with
id '16'.
61869 [PoolThread-1] ERROR
org.codehaus.plexus.velocity.VelocityComponent - RHS of #set statement
is null. Context will not be modified. screens/Summary.vm [line 1, column 1]
73556 [PoolThread-1] INFO
org.apache.maven.continuum.project.builder.ContinuumProjectBuilder:maven-two-builder
- Downloading
http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml
74097 [PoolThread-1] DEBUG
org.apache.maven.artifact.resolver.ArtifactResolver - Resolving:
org.apache.maven.scm:maven-scm:pom:1.0-alpha-2-SNAPSHOT from:
{localRepository: [local] ->
file://C:\continuum-1.0-alpha-2\bin\..\apps\continuum/local-repository}
{remoteRepositories: [[central] -> http://repo1.maven.org/maven2]}
74117 [PoolThread-1] INFO
org.apache.maven.artifact.transform.ArtifactTransformation:snapshot -
maven-scm: resolved to version 1.0-alpha-2-20050610.043511-1 from local
repository
74387 [Thread-5] INFO org.apache.maven.continuum.scm.ContinuumScm -
Checking out project: 'Maven SCM Test', id: '21' to
'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
74457 [Thread-5] DEBUG
org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
Working directory: C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21
74457 [Thread-5] DEBUG
org.apache.maven.scm.provider.cvslib.command.CvsCommand:check-out -
Command line: cvs -f -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic
-q checkout -d 21 maven-scm
74477 [PoolThread-1] ERROR
org.codehaus.plexus.velocity.VelocityComponent - RHS of #set statement
is null. Context will not be modified. screens/Summary.vm [line 1, column 1]
74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
Error while checking out the code for project: 'Maven SCM Test', id:
'21' to 'C:\continuum-1.0-alpha-2\bin\..\apps\continuum\temp\21'.
74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
Command output: 'cvs' is not recognized as an internal or external command,
operable program or batch file.
74848 [Thread-5] WARN org.apache.maven.continuum.scm.ContinuumScm -
Provider message: The cvs command failed.
tnx - jruiz
Re: I can't add M2 Project
Posted by Trygve Laugstøl <tr...@codehaus.org>.
On Thu, Jun 23, 2005 at 04:17:31PM +0800, Johnny R. Ruiz III wrote:
> Hi,
>
> I successfully installed Continuum1.0-alpha-2 in my laptop. I launch
> continuum using a Web Browser and tried to add an M2 project.
> The POM that I used was
> http://svn.apache.org/repos/asf/maven/scm/trunk/maven-scm-test/pom.xml.
>
> There was an error on adding this project. The result is:
>
> org.apache.maven.continuum.scm.ContinuumScmException: Error while
> checking out the project.
> at
> org.apache.maven.continuum.scm.DefaultContinuumScm.checkOut(DefaultContinuumScm.java:84)
> at
> org.apache.maven.continuum.scm.queue.CheckOutTaskExecutor.executeTask(CheckOutTaskExecutor.java:80)
> at
> org.codehaus.plexus.taskqueue.execution.ThreadedTaskQueueExecutor$ExecutorRunnable.run(ThreadedTaskQueueExecutor.java:100)
> at java.lang.Thread.run(Thread.java:534)
>
Are there anything else in the logs?
--
Trygve
> Anyone have an idea on the problem?
>
> Thanks a lot -- jruiz
>
>