You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@tapestry.apache.org by Taha Hafeez <ta...@gmail.com> on 2011/09/30 13:30:55 UTC
Intellij & jetty
Hi
I am just trying a new project in Intellij 10( I am new to it) and
these are the steps I use
1) gradle cleanIdea idea
2) open the project in intellij
3) Add tapestry and web facets.
4) Run with jetty.
Everything works fine but no class reloading is happening. I tried a
few things but it did not work. Any clue why ?
--
Regards
Taha Hafeez Siddiqi (tawus)
http://tawus.wordpress.com
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: Intellij & jetty
Posted by Stephan Windmüller <st...@tu-dortmund.de>.
On 30.09.2011 13:30, Taha Hafeez wrote:
> Everything works fine but no class reloading is happening. I tried a
> few things but it did not work. Any clue why ?
Did you try to manually update the resources by pressing Ctrl+F10?
Instead you can edit the run configuration of jetty, see the settings
below "VM parameters" in the "Server" tab.
The documentation can be found here:
http://www.jetbrains.com/idea/webhelp/updating-a-running-java-ee-application.html
HTH
Stephan
Re: Intellij & jetty
Posted by Jens Breitenstein <ma...@j-b-s.de>.
Hi Taha!
I'll use
a) new project | maven ....
b) edit configurations | add jetty server | local
edit your newly created configuration and make sure "perform on update
action" --> "hot swap classes" is selected
afterwards if you build a class or module intellij prompts you for
hot-swapping. the number of reloaded classes is shown on the bottom left.
under "preferences" | (type in: "file type" in the search box) | File
types --> you can see a "tapestry template file" entry which copies tml
in case of changes (this was not the case prior 10 afaik).
this works for me.
Jens
Am 30.09.11 13:30, schrieb Taha Hafeez:
> Hi
>
> I am just trying a new project in Intellij 10( I am new to it) and
> these are the steps I use
>
> 1) gradle cleanIdea idea
>
> 2) open the project in intellij
>
> 3) Add tapestry and web facets.
>
> 4) Run with jetty.
>
> Everything works fine but no class reloading is happening. I tried a
> few things but it did not work. Any clue why ?
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: Intellij & jetty
Posted by Taha Hafeez Siddiqi <ta...@gmail.com>.
Oops! I had production mode on :)
On Oct 1, 2011, at 2:39 AM, Chris Poulsen wrote:
> I always run jetty from a command prompt (mvn jetty:run) and have not
> experienced issues with IDEA / jetty /live reloading.
>
> It is just a matter of opening the pom as a project and then we're good to
> go (jdk version may need to be adjusted iirc).
>
> --
> Chris
>
> On Fri, Sep 30, 2011 at 5:13 PM, Taha Hafeez <ta...@gmail.com>wrote:
>
>> Thanks everybody.
>>
>> I have been able to sort half the issue. Files are getting updated but
>> jetty does not pick them up.
>>
>> I manually deleted files in classes directory and on command + F10
>> everything was copied and compiled but jetty is not picking them up.
>>
>> Any ideas ?
>>
>>
>> On Fri, Sep 30, 2011 at 7:03 PM, Josh Canfield <jo...@gmail.com>
>> wrote:
>>> Under "Project Settings" | "Artifacts" you'll see your web application
>>> artifact. Look for "Build on make" and check the box. this isn't set
>>> by default so your compiled changes aren't stored into the file
>>> system.
>>>
>>> There is an issue that I haven't worked around. When you change a
>>> class file it seems to replace all of your resource files with the
>>> ones in the original deployment. When I'm working on a page I tend to
>>> compile the class then flip over and re-compile the page. Running make
>>> can also pick up all the changes.
>>>
>>> Josh
>>>
>>> On Fri, Sep 30, 2011 at 4:30 AM, Taha Hafeez <ta...@gmail.com>
>> wrote:
>>>> Hi
>>>>
>>>> I am just trying a new project in Intellij 10( I am new to it) and
>>>> these are the steps I use
>>>>
>>>> 1) gradle cleanIdea idea
>>>>
>>>> 2) open the project in intellij
>>>>
>>>> 3) Add tapestry and web facets.
>>>>
>>>> 4) Run with jetty.
>>>>
>>>> Everything works fine but no class reloading is happening. I tried a
>>>> few things but it did not work. Any clue why ?
>>>> --
>>>> Regards
>>>>
>>>> Taha Hafeez Siddiqi (tawus)
>>>> http://tawus.wordpress.com
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>>>> For additional commands, e-mail: users-help@tapestry.apache.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>>> For additional commands, e-mail: users-help@tapestry.apache.org
>>>
>>>
>>
>>
>>
>> --
>> Regards
>>
>> Taha Hafeez Siddiqi (tawus)
>> http://tawus.wordpress.com
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> For additional commands, e-mail: users-help@tapestry.apache.org
>>
>>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: Intellij & jetty
Posted by Chris Poulsen <ma...@nesluop.dk>.
I always run jetty from a command prompt (mvn jetty:run) and have not
experienced issues with IDEA / jetty /live reloading.
It is just a matter of opening the pom as a project and then we're good to
go (jdk version may need to be adjusted iirc).
--
Chris
On Fri, Sep 30, 2011 at 5:13 PM, Taha Hafeez <ta...@gmail.com>wrote:
> Thanks everybody.
>
> I have been able to sort half the issue. Files are getting updated but
> jetty does not pick them up.
>
> I manually deleted files in classes directory and on command + F10
> everything was copied and compiled but jetty is not picking them up.
>
> Any ideas ?
>
>
> On Fri, Sep 30, 2011 at 7:03 PM, Josh Canfield <jo...@gmail.com>
> wrote:
> > Under "Project Settings" | "Artifacts" you'll see your web application
> > artifact. Look for "Build on make" and check the box. this isn't set
> > by default so your compiled changes aren't stored into the file
> > system.
> >
> > There is an issue that I haven't worked around. When you change a
> > class file it seems to replace all of your resource files with the
> > ones in the original deployment. When I'm working on a page I tend to
> > compile the class then flip over and re-compile the page. Running make
> > can also pick up all the changes.
> >
> > Josh
> >
> > On Fri, Sep 30, 2011 at 4:30 AM, Taha Hafeez <ta...@gmail.com>
> wrote:
> >> Hi
> >>
> >> I am just trying a new project in Intellij 10( I am new to it) and
> >> these are the steps I use
> >>
> >> 1) gradle cleanIdea idea
> >>
> >> 2) open the project in intellij
> >>
> >> 3) Add tapestry and web facets.
> >>
> >> 4) Run with jetty.
> >>
> >> Everything works fine but no class reloading is happening. I tried a
> >> few things but it did not work. Any clue why ?
> >> --
> >> Regards
> >>
> >> Taha Hafeez Siddiqi (tawus)
> >> http://tawus.wordpress.com
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> >> For additional commands, e-mail: users-help@tapestry.apache.org
> >>
> >>
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> > For additional commands, e-mail: users-help@tapestry.apache.org
> >
> >
>
>
>
> --
> Regards
>
> Taha Hafeez Siddiqi (tawus)
> http://tawus.wordpress.com
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
>
>
Re: Intellij & jetty
Posted by Taha Hafeez <ta...@gmail.com>.
Thanks everybody.
I have been able to sort half the issue. Files are getting updated but
jetty does not pick them up.
I manually deleted files in classes directory and on command + F10
everything was copied and compiled but jetty is not picking them up.
Any ideas ?
On Fri, Sep 30, 2011 at 7:03 PM, Josh Canfield <jo...@gmail.com> wrote:
> Under "Project Settings" | "Artifacts" you'll see your web application
> artifact. Look for "Build on make" and check the box. this isn't set
> by default so your compiled changes aren't stored into the file
> system.
>
> There is an issue that I haven't worked around. When you change a
> class file it seems to replace all of your resource files with the
> ones in the original deployment. When I'm working on a page I tend to
> compile the class then flip over and re-compile the page. Running make
> can also pick up all the changes.
>
> Josh
>
> On Fri, Sep 30, 2011 at 4:30 AM, Taha Hafeez <ta...@gmail.com> wrote:
>> Hi
>>
>> I am just trying a new project in Intellij 10( I am new to it) and
>> these are the steps I use
>>
>> 1) gradle cleanIdea idea
>>
>> 2) open the project in intellij
>>
>> 3) Add tapestry and web facets.
>>
>> 4) Run with jetty.
>>
>> Everything works fine but no class reloading is happening. I tried a
>> few things but it did not work. Any clue why ?
>> --
>> Regards
>>
>> Taha Hafeez Siddiqi (tawus)
>> http://tawus.wordpress.com
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
>> For additional commands, e-mail: users-help@tapestry.apache.org
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
>
>
--
Regards
Taha Hafeez Siddiqi (tawus)
http://tawus.wordpress.com
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org
Re: Intellij & jetty
Posted by Josh Canfield <jo...@gmail.com>.
Under "Project Settings" | "Artifacts" you'll see your web application
artifact. Look for "Build on make" and check the box. this isn't set
by default so your compiled changes aren't stored into the file
system.
There is an issue that I haven't worked around. When you change a
class file it seems to replace all of your resource files with the
ones in the original deployment. When I'm working on a page I tend to
compile the class then flip over and re-compile the page. Running make
can also pick up all the changes.
Josh
On Fri, Sep 30, 2011 at 4:30 AM, Taha Hafeez <ta...@gmail.com> wrote:
> Hi
>
> I am just trying a new project in Intellij 10( I am new to it) and
> these are the steps I use
>
> 1) gradle cleanIdea idea
>
> 2) open the project in intellij
>
> 3) Add tapestry and web facets.
>
> 4) Run with jetty.
>
> Everything works fine but no class reloading is happening. I tried a
> few things but it did not work. Any clue why ?
> --
> Regards
>
> Taha Hafeez Siddiqi (tawus)
> http://tawus.wordpress.com
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
> For additional commands, e-mail: users-help@tapestry.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tapestry.apache.org
For additional commands, e-mail: users-help@tapestry.apache.org