[GitHub] [incubator-mxnet] k128 commented on issue #14664: tools/staticbuild/build.sh uses AVX2 instruction set

[GitBox <gi...@apache.org>]

k128 commented on issue #14664: tools/staticbuild/build.sh uses AVX2 instruction set
URL: https://github.com/apache/incubator-mxnet/issues/14664#issuecomment-577978683
 
 
   It took me a long time to get the output since for some reason, sending the output to a text file was causing cc1plus processes to spawn until the system crashed from lack of memory.  Eventually I figured out what was causing the issue (still no idea why) and used script instead.  Here's where I'm at:
   
   Code I ran:
   sudo apt install -y build-essential git libopenblas-dev liblapack-dev libopencv-dev graphviz
   git clone --recursive https://github.com/apache/incubator-mxnet.git
   cd ~/incubator-mxnet && mkdir build && cd build
   cmake -DUSE_CUDA=OFF -DUSE_MKL_IF_AVAILABLE=ON -DUSE_MKLDNN=ON -DUSE_OPENMP=ON -DUSE_OPENCV=ON ..>cmakeincmx.txt
   script makeincmx.txt
   make -j 4
   exit
   git clone --recursive https://github.com/apache/incubator-mxnet.git ~/mxnet
   cd ~/mxnet && rm -rf build && mkdir -p build && cd build
   cmake -GNinja \
       -DUSE_CUDA=OFF \
       -DUSE_MKL_IF_AVAILABLE=ON \
       -DCMAKE_BUILD_TYPE=Release \
   ..>cmakemxnet.txt
   ninja -j4>ninjamxnet.txt
   cd ~/mxnet/python
   pip3 install --user .
   
   Output (additional files attached)
   [cmakeincmx.txt](https://github.com/apache/incubator-mxnet/files/4106721/cmakeincmx.txt)
   [makeincmx.txt](https://github.com/apache/incubator-mxnet/files/4106722/makeincmx.txt)
   [cmakemxnet.txt](https://github.com/apache/incubator-mxnet/files/4106724/cmakemxnet.txt)
   [ninjamxnet.txt](https://github.com/apache/incubator-mxnet/files/4106725/ninjamxnet.txt)
   
   
   
   :
   Processing /home/k64/mxnet/python
       Complete output from command python setup.py egg_info:
       Traceback (most recent call last):
         File "<string>", line 1, in <module>
         File "/tmp/pip-k46flbau-build/setup.py", line 47, in <module>
           LIB_PATH = libinfo['find_lib_path']()
         File "/tmp/pip-k46flbau-build/mxnet/libinfo.py", line 73, in find_lib_path
           raise RuntimeError('Cannot find the MXNet library.\n' +
       RuntimeError: Cannot find the MXNet library.
       List of candidates:
       /usr/local/cuda-6.5/lib64/libmxnet.so
       libmxnet.so
       /tmp/pip-k46flbau-build/mxnet/libmxnet.so
       /tmp/pip-k46flbau-build/mxnet/../../lib/libmxnet.so
       /tmp/pip-k46flbau-build/mxnet/../../build/libmxnet.so
       ../../../libmxnet.so
       
       ----------------------------------------
   Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-k46flbau-build/

----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
 
For queries about this service, please contact Infrastructure at:
users@infra.apache.org


With regards,
Apache Git Services