You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@royale.apache.org by Erik de Bruin <er...@apache.org> on 2017/10/02 14:15:25 UTC
Hello world
Hi,
I'm at the Hello World stage of my re-introduction to Royale.
I have downloaded Visual Studio Code, installed the vscode-nextgenas
extension and asconfig NPM module. I followed the instructions here:
https://github.com/BowlerHatLLC/vscode-nextgenas/wiki
I now have a 'HelloFlexJS' project that builds successfully...
However, and this is my question, I don't have an 'index.html' in the
bin/js-debug output directory. Is this by design? Do I have to add it to
the project and then copy it with a compiler directive? If so, are there
instruction out there?
Thanks,
EdB
Re: Hello world
Posted by Erik de Bruin <er...@ixsoftware.nl>.
Bingo!
"Hello world" is in my browser.
To boldy go...
Thanks,
EdB
On Mon, Oct 2, 2017 at 7:50 PM, Alex Harui <ah...@adobe.com> wrote:
> Try the target "JSFlex" instead of "JS". I think "JS" is for raw
> transpilation of AS to JS.
>
> Of course, I could be wrong…
> -Alex
>
> From: Erik de Bruin <er...@ixsoftware.nl>
> Reply-To: "users@royale.apache.org" <us...@royale.apache.org>
> Date: Monday, October 2, 2017 at 9:53 AM
> To: "users@royale.apache.org" <us...@royale.apache.org>
> Subject: Re: Hello world
>
> In targets I have "JS" and I have no config entry. I was following Josh's
> steps on the "vscode-nextgenas" repo. Is there maybe a "better" HelloWorld
> example with setup steps available?
>
> I'm planning on putting my set up experiences in a Quick Start entry on
> the GitHub wiki, after I get a project running.
>
> EdB
>
>
>
> On Mon, Oct 2, 2017 at 5:00 PM, Harbs <ha...@gmail.com> wrote:
>
>> What did you specify in “targets” and “config” in your asconfig.json
>> file?
>>
>> On Oct 2, 2017, at 5:15 PM, Erik de Bruin <er...@apache.org> wrote:
>>
>> Hi,
>>
>> I'm at the Hello World stage of my re-introduction to Royale.
>>
>> I have downloaded Visual Studio Code, installed the vscode-nextgenas
>> extension and asconfig NPM module. I followed the instructions here:
>>
>> https://github.com/BowlerHatLLC/vscode-nextgenas/wiki
>> <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FBowlerHatLLC%2Fvscode-nextgenas%2Fwiki&data=02%7C01%7C%7Cf390c0b1054d40b8eca208d509b63810%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636425600581241956&sdata=fha9l2xDD7%2FsVoIRZSO4Z3A%2BILa6gjDJ1cebAgMZAmI%3D&reserved=0>
>>
>> I now have a 'HelloFlexJS' project that builds successfully...
>>
>> However, and this is my question, I don't have an 'index.html' in the
>> bin/js-debug output directory. Is this by design? Do I have to add it to
>> the project and then copy it with a compiler directive? If so, are there
>> instruction out there?
>>
>> Thanks,
>>
>> EdB
>>
>>
>>
>>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> <https://maps.google.com/?q=Jan+Luykenstraat+27+%0D+3521+VB+Utrecht&entry=gmail&source=g>
> 3521 VB Utrecht
>
> T. 06-51952295 <06%2051952295>
> I. www.ixsoftware.nl
> <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ixsoftware.nl&data=02%7C01%7C%7Cf390c0b1054d40b8eca208d509b63810%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636425600581241956&sdata=ZCGfU4W1Dvg6JDFPLi%2FCHOq4TXZW9X7Jzbq1E7QG%2Fe4%3D&reserved=0>
>
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Hello world
Posted by Harbs <ha...@gmail.com>.
Yup. (asconfig just passes those values in as compiler arguments)
> On Oct 2, 2017, at 8:50 PM, Alex Harui <ah...@adobe.com> wrote:
>
> Try the target "JSFlex" instead of "JS". I think "JS" is for raw transpilation of AS to JS.
>
> Of course, I could be wrong…
> -Alex
>
> From: Erik de Bruin <erik@ixsoftware.nl <ma...@ixsoftware.nl>>
> Reply-To: "users@royale.apache.org <ma...@royale.apache.org>" <users@royale.apache.org <ma...@royale.apache.org>>
> Date: Monday, October 2, 2017 at 9:53 AM
> To: "users@royale.apache.org <ma...@royale.apache.org>" <users@royale.apache.org <ma...@royale.apache.org>>
> Subject: Re: Hello world
>
> In targets I have "JS" and I have no config entry. I was following Josh's steps on the "vscode-nextgenas" repo. Is there maybe a "better" HelloWorld example with setup steps available?
>
> I'm planning on putting my set up experiences in a Quick Start entry on the GitHub wiki, after I get a project running.
>
> EdB
>
>
>
> On Mon, Oct 2, 2017 at 5:00 PM, Harbs <harbs.lists@gmail.com <ma...@gmail.com>> wrote:
>> What did you specify in “targets” and “config” in your asconfig.json file?
>>
>>> On Oct 2, 2017, at 5:15 PM, Erik de Bruin <erikdebruin@apache.org <ma...@apache.org>> wrote:
>>>
>>> Hi,
>>>
>>> I'm at the Hello World stage of my re-introduction to Royale.
>>>
>>> I have downloaded Visual Studio Code, installed the vscode-nextgenas extension and asconfig NPM module. I followed the instructions here:
>>>
>>> https://github.com/BowlerHatLLC/vscode-nextgenas/wiki <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FBowlerHatLLC%2Fvscode-nextgenas%2Fwiki&data=02%7C01%7C%7Cf390c0b1054d40b8eca208d509b63810%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636425600581241956&sdata=fha9l2xDD7%2FsVoIRZSO4Z3A%2BILa6gjDJ1cebAgMZAmI%3D&reserved=0>
>>>
>>> I now have a 'HelloFlexJS' project that builds successfully...
>>>
>>> However, and this is my question, I don't have an 'index.html' in the bin/js-debug output directory. Is this by design? Do I have to add it to the project and then copy it with a compiler directive? If so, are there instruction out there?
>>>
>>> Thanks,
>>>
>>> EdB
>>>
>>>
>>
>
>
>
> --
> Ix Multimedia Software
>
> Jan Luykenstraat 27
> 3521 VB Utrecht
>
> T. 06-51952295
> I. www.ixsoftware.nl <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ixsoftware.nl&data=02%7C01%7C%7Cf390c0b1054d40b8eca208d509b63810%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636425600581241956&sdata=ZCGfU4W1Dvg6JDFPLi%2FCHOq4TXZW9X7Jzbq1E7QG%2Fe4%3D&reserved=0>
Re: Hello world
Posted by Alex Harui <ah...@adobe.com>.
Try the target "JSFlex" instead of "JS". I think "JS" is for raw transpilation of AS to JS.
Of course, I could be wrong…
-Alex
From: Erik de Bruin <er...@ixsoftware.nl>>
Reply-To: "users@royale.apache.org<ma...@royale.apache.org>" <us...@royale.apache.org>>
Date: Monday, October 2, 2017 at 9:53 AM
To: "users@royale.apache.org<ma...@royale.apache.org>" <us...@royale.apache.org>>
Subject: Re: Hello world
In targets I have "JS" and I have no config entry. I was following Josh's steps on the "vscode-nextgenas" repo. Is there maybe a "better" HelloWorld example with setup steps available?
I'm planning on putting my set up experiences in a Quick Start entry on the GitHub wiki, after I get a project running.
EdB
On Mon, Oct 2, 2017 at 5:00 PM, Harbs <ha...@gmail.com>> wrote:
What did you specify in “targets” and “config” in your asconfig.json file?
On Oct 2, 2017, at 5:15 PM, Erik de Bruin <er...@apache.org>> wrote:
Hi,
I'm at the Hello World stage of my re-introduction to Royale.
I have downloaded Visual Studio Code, installed the vscode-nextgenas extension and asconfig NPM module. I followed the instructions here:
https://github.com/BowlerHatLLC/vscode-nextgenas/wiki<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FBowlerHatLLC%2Fvscode-nextgenas%2Fwiki&data=02%7C01%7C%7Cf390c0b1054d40b8eca208d509b63810%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636425600581241956&sdata=fha9l2xDD7%2FsVoIRZSO4Z3A%2BILa6gjDJ1cebAgMZAmI%3D&reserved=0>
I now have a 'HelloFlexJS' project that builds successfully...
However, and this is my question, I don't have an 'index.html' in the bin/js-debug output directory. Is this by design? Do I have to add it to the project and then copy it with a compiler directive? If so, are there instruction out there?
Thanks,
EdB
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ixsoftware.nl&data=02%7C01%7C%7Cf390c0b1054d40b8eca208d509b63810%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636425600581241956&sdata=ZCGfU4W1Dvg6JDFPLi%2FCHOq4TXZW9X7Jzbq1E7QG%2Fe4%3D&reserved=0>
Re: Hello world
Posted by Erik de Bruin <er...@ixsoftware.nl>.
In targets I have "JS" and I have no config entry. I was following Josh's
steps on the "vscode-nextgenas" repo. Is there maybe a "better" HelloWorld
example with setup steps available?
I'm planning on putting my set up experiences in a Quick Start entry on the
GitHub wiki, after I get a project running.
EdB
On Mon, Oct 2, 2017 at 5:00 PM, Harbs <ha...@gmail.com> wrote:
> What did you specify in “targets” and “config” in your asconfig.json file?
>
> On Oct 2, 2017, at 5:15 PM, Erik de Bruin <er...@apache.org> wrote:
>
> Hi,
>
> I'm at the Hello World stage of my re-introduction to Royale.
>
> I have downloaded Visual Studio Code, installed the vscode-nextgenas
> extension and asconfig NPM module. I followed the instructions here:
>
> https://github.com/BowlerHatLLC/vscode-nextgenas/wiki
>
> I now have a 'HelloFlexJS' project that builds successfully...
>
> However, and this is my question, I don't have an 'index.html' in the
> bin/js-debug output directory. Is this by design? Do I have to add it to
> the project and then copy it with a compiler directive? If so, are there
> instruction out there?
>
> Thanks,
>
> EdB
>
>
>
>
--
Ix Multimedia Software
Jan Luykenstraat 27
3521 VB Utrecht
T. 06-51952295
I. www.ixsoftware.nl
Re: Hello world
Posted by Harbs <ha...@gmail.com>.
What did you specify in “targets” and “config” in your asconfig.json file?
> On Oct 2, 2017, at 5:15 PM, Erik de Bruin <er...@apache.org> wrote:
>
> Hi,
>
> I'm at the Hello World stage of my re-introduction to Royale.
>
> I have downloaded Visual Studio Code, installed the vscode-nextgenas extension and asconfig NPM module. I followed the instructions here:
>
> https://github.com/BowlerHatLLC/vscode-nextgenas/wiki <https://github.com/BowlerHatLLC/vscode-nextgenas/wiki>
>
> I now have a 'HelloFlexJS' project that builds successfully...
>
> However, and this is my question, I don't have an 'index.html' in the bin/js-debug output directory. Is this by design? Do I have to add it to the project and then copy it with a compiler directive? If so, are there instruction out there?
>
> Thanks,
>
> EdB
>
>