You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@solr.apache.org by Maulin Rathod <mn...@gmail.com> on 2022/11/09 15:02:25 UTC

Problem in importing project in Eclipse

Hi,

I am a developer with 15 year experience and using Solr for the last 7-8
years. Now I want to contribute to solr...

I followed the instructions provided on this link to import the project in
Eclipse.

https://cwiki.apache.org/confluence/display/solr/HowToContribute

After checking the main branch locally (git clone
http://gitbox.apache.org/repos/asf/solr.git), when I import (using *Existing
Gradle Project* option) in eclipse, the build process is stuck at around 5%
with thousands of errors. Refer below screenshot.

Am I missing something? Please help...


[image: image.png]

Re: Problem in importing project in Eclipse

Posted by Shawn Heisey <ap...@elyograg.org>.
On 11/9/22 08:02, Maulin Rathod wrote:
> I am a developer with 15 year experience and using Solr for the last 
> 7-8 years. Now I want to contribute to solr...
>
> I followed the instructions provided on this link to import the 
> project in Eclipse.
>
> https://cwiki.apache.org/confluence/display/solr/HowToContribute
>
> After checking the main branch locally (git clone 
> http://gitbox.apache.org/repos/asf/solr.git), when I import (using 
> *Existing Gradle Project* option) in eclipse, the build process is 
> stuck at around 5% with thousands of errors. Refer below screenshot.

Your screenshot did not come through.  Attachments sent to the mailing 
list rarely make it through.

You should run "./gradlew clean cleanEclipse eclipse" before you import 
the project.  Then it will be an eclipse project that gets imported, not 
a gradle project.  This is on the wiki article you linked, but does not 
include the "clean" and "cleanEclipse" targets that I added.

For Windows, you must install perl and remove the "./" part from the 
gradlew command, and run it in a command prompt.  Elevation of the 
command prompt should not be required.  I know for sure that Strawberry 
Perl works, but I think that something like ActivePerl would also work.

Note that Java 19 is not yet supported by Gradle, so you must use a JDK 
version between 11 and 17 on any OS.  Only versions 11 and 17 are 
recommended.  I think 14 is also an LTS release, but it isn't often 
referenced.  I have no idea whether Java 18 works, but I wouldn't 
recommend using it as it is an interim release that I believe is no 
longer supported.

I just did these steps with branch_9x (the branch I already had checked 
out) and there are still a few errors.  One class with the same name as 
another in a different package, and the existence of package-info.java 
files for the same package in both the test and src trees.  Fixing those 
was pretty easy, I need to work on getting that into the codebase.

Did it with the main branch, I ran into the same errors and fixed them 
the same way.  The patches for both main and branch_9x are identical.

Thanks,
Shawn


Re: Problem in importing project in Eclipse

Posted by Maulin Rathod <mn...@gmail.com>.
Hi Shawn,

I am able to build successfully using  .\gradlew clean dev command. Thanks
for your help.

I want to add/modify solr code (e.g. Adding new plugin/Stream Decorator)
and debug it locally.

https://solr.apache.org/guide/8_4/solr-plugins.html - This link provides
details about existing plugins but details not available for creating own
plugins.

Is there any documentation which describes how to create a new
plugin/Stream Decorator?

Regards,

Maulin

On Fri, Nov 11, 2022 at 7:36 AM Shawn Heisey <ap...@elyograg.org> wrote:

> On 11/10/2022 2:39 PM, Shawn Heisey wrote:
> > My tests above were done on Ubuntu Server 22.04.  I will try it on a
> > Windows 10 pro machine and reply back if I have any problems with that.
>
> Installed Strawberry Perl, Git for Windows, and Temurin JDK 17.
>
> The build failed, with a different error than you are getting.
>
> ---
>  > Task :checkJdkInternalsExportedToGradle FAILED
>
> FAILURE: Build failed with an exception.
>
> * Where:
> Script
> 'C:\Users\elyograg\git\solr\gradle\generation\local-settings.gradle'
> line: 42
>
> * What went wrong:
> Execution failed for task ':checkJdkInternalsExportedToGradle'.
>  > Certain gradle tasks and plugins require access to jdk.compiler
> internals, your gradle.properties might have just been generated or
> could be out of sync (see help/localSettings.txt)
>
> * Try:
>  > Run with --stacktrace option to get the stack trace.
>  > Run with --info or --debug option to get more log output.
>  > Run with --scan to get full insights.
>
> * Get more help at https://help.gradle.org
>
> Deprecated Gradle features were used in this build, making it
> incompatible with Gradle 8.0.
>
> You can use '--warning-mode all' to show the individual deprecation
> warnings and determine if they come from your own scripts or plugins.
>
> See
>
> https://docs.gradle.org/7.5.1/userguide/command_line_interface.html#sec:command_line_warnings
>
> BUILD FAILED in 5m 41s
> 185 actionable tasks: 185 executed
> Error: Something went wrong. Make sure you're using Java 11 - 18.
> ---
>
> I found that an issue had been filed against something called OpenSearch
> for the same problem.  The fix was apparently this commit:
>
> https://github.com/opensearch-project/OpenSearch/pull/3396/files
>
> So what I tried next was ".\gradlew clean localSettings build" ... and
> that gave me the same error you're getting.
>
> With the --info build option I saw the following.  It might have been
> there before adding --info, but on that build I hadn't scrolled up.
>
> ---
>  > Task :solr:documentation:checkBrokenLinks FAILED
> Caching disabled for task ':solr:documentation:checkBrokenLinks' because:
>    Build cache is disabled
> Task ':solr:documentation:checkBrokenLinks' is not up-to-date because:
>    Task has failed previously.
> External tool 'python3' resolved to: python3
> Starting process 'command 'python3''. Working directory:
> C:\Users\elyograg\git\solr\solr\documentation Command: python3 -B
> C:\Users\elyograg\git\solr\dev-tools\scripts\checkJavadocLinks.py
> C:\Users\elyograg\git\solr\solr\documentation\build\site
> Successfully started process 'command 'python3''
> :solr:documentation:checkBrokenLinks (Thread[Execution worker Thread
> 3,5,main]) completed. Took 0.383 secs.
> ---
>
> I manually tried running 'python3' and that fired up the Microsoft Store
> where I could download python.  Which I did, then tried the same gradlew
> command again.
>
> Now it gets past the error you are getting and I am seeing failed tests.
>
> What is your goal with building Solr from source?  If you're trying to
> build something you can run, then you want ".\gradlew clean dev" and if
> you're trying to make a package like what you can download, you want
> ".\gradlew clean distTar" or ".\gradlew clean assemble".  These targets
> only require perl, not python. The build target requires python3 and
> runs all the tests, which takes a long time and often fails.  And until
> we can fix the problem in the codebase, if you really do want the build
> target, you will need to add localSettings before it.
>
> Thanks,
> Shawn
>
>

-- 
Regards,

Maulin Rathod
Development Director
Asite Solution Pvt Ltd.

M: 9723286945
E : mnrathod@gmail.com
W: www.asite.com

Re: Problem in importing project in Eclipse

Posted by Maulin Rathod <mn...@gmail.com>.
Thanks Shawn for the detailed response.

In my use case, I want to fetch data from multiple collections. so I want
to use the stream expression (innerJoin decorator for joining collections).
But I can't see (on this
https://solr.apache.org/guide/8_7/stream-decorator-reference.html#stream-decorator-reference
) any decorator that can help to implement paging. so I am planning to
implement a skip/limit decorator to support paging.




On Fri, Nov 11, 2022 at 7:46 PM Shawn Heisey <ap...@elyograg.org> wrote:

> On 11/11/22 00:32, Maulin Rathod wrote:
> > On Windows, I have installed python3 and now I am able to execute
> > '.\gradlew clean dev' successfully.
> >
> > I want to add/modify solr code (e.g. Adding new plugin/Stream Decorator)
> > and debug it locally.
> > Is there any documentation which describes how to create a new
> > plugin/Stream Decorator?
>
> I don't think there is.  Your best option is to examine code in Solr or
> Lucene for existing classes of the same sort of plugin you want to
> create and use that as a template for your plugin.  What kind of plugin
> did you want to write?  There are a lot of possibilities.  Somebody here
> can figure out what class to use for inspiration.  If you are wanting to
> do a stream decorator (your question includes that) then I have no idea
> what class in Solr you would want to use as  astarting point.  I can't
> find any examples when I search the codebase, so apparently I do not
> know what to search for.
>
> As for the way to build a project for the plugin, use your favorite Java
> project building mechanism and have it add solr-core as a compile
> dependency, but not a build dependency.  I generally use
> https://start.spring.io to build a new project and import that into
> eclipse.  The nice thing about that is that when you compile it, you'll
> get two jars ... one with just your code and one with all the
> dependencies included.  You would most likely want to use the one with
> just your code.  It's a bad idea for a plugin to include any classes
> already loaded into Solr.  That tends to cause problems, even if those
> classes are identical to what Solr already has.
>
> Thanks,
> Shawn
>
>

-- 
Regards,

Maulin Rathod
Development Director
Asite Solution Pvt Ltd.

M: 9723286945
E : mnrathod@gmail.com
W: www.asite.com

Re: Problem in importing project in Eclipse

Posted by Shawn Heisey <ap...@elyograg.org>.
On 11/11/22 00:32, Maulin Rathod wrote:
> On Windows, I have installed python3 and now I am able to execute
> '.\gradlew clean dev' successfully.
>
> I want to add/modify solr code (e.g. Adding new plugin/Stream Decorator)
> and debug it locally.
> Is there any documentation which describes how to create a new
> plugin/Stream Decorator?

I don't think there is.  Your best option is to examine code in Solr or 
Lucene for existing classes of the same sort of plugin you want to 
create and use that as a template for your plugin.  What kind of plugin 
did you want to write?  There are a lot of possibilities.  Somebody here 
can figure out what class to use for inspiration.  If you are wanting to 
do a stream decorator (your question includes that) then I have no idea 
what class in Solr you would want to use as  astarting point.  I can't 
find any examples when I search the codebase, so apparently I do not 
know what to search for.

As for the way to build a project for the plugin, use your favorite Java 
project building mechanism and have it add solr-core as a compile 
dependency, but not a build dependency.  I generally use 
https://start.spring.io to build a new project and import that into 
eclipse.  The nice thing about that is that when you compile it, you'll 
get two jars ... one with just your code and one with all the 
dependencies included.  You would most likely want to use the one with 
just your code.  It's a bad idea for a plugin to include any classes 
already loaded into Solr.  That tends to cause problems, even if those 
classes are identical to what Solr already has.

Thanks,
Shawn


Re: Problem in importing project in Eclipse

Posted by Maulin Rathod <mn...@gmail.com>.
On Windows, I have installed python3 and now I am able to execute
'.\gradlew clean dev' successfully.

I want to add/modify solr code (e.g. Adding new plugin/Stream Decorator)
and debug it locally.
Is there any documentation which describes how to create a new
plugin/Stream Decorator?

On Fri, Nov 11, 2022 at 9:17 AM Shawn Heisey <ap...@elyograg.org> wrote:

> On 11/10/22 19:04, Shawn Heisey wrote:
> > Now it gets past the error you are getting and I am seeing failed tests.
>
> I haven't yet gotten a good run on Windows.  The tests seem to fail a
> lot more there.
>
> One problem might be that my Windows machine has a 4-core 7th generation
> Intel desktop CPU and my Linux server has two 12-core Xeon CPUs.  The
> server is quite a bit faster than the desktop. When I looked into one of
> the test failures, it failed with this message, which certainly sounds
> like an issue with test performance:
>
> java.lang.Exception: Custom 'security.json' not applied in 10000ms
>
> If you really do need the build target, you're going to need to install
> python.  Just running python3, from a command prompt, powershell, or
> even the Run box or start menu, will open the python page on the
> Microsoft Store and it's easy to install from there.  Perl is also
> required.
>
> I need to look into why building no longer works in Git Bash, which is
> part of Git for Windows.  It used to work.
>
> Thanks,
> Shawn
>
>

-- 
Regards,

Maulin Rathod
Development Director
Asite Solution Pvt Ltd.

M: 9723286945
E : mnrathod@gmail.com
W: www.asite.com

Re: Problem in importing project in Eclipse

Posted by Shawn Heisey <ap...@elyograg.org>.
On 11/10/22 19:04, Shawn Heisey wrote:
> Now it gets past the error you are getting and I am seeing failed tests. 

I haven't yet gotten a good run on Windows.  The tests seem to fail a 
lot more there.

One problem might be that my Windows machine has a 4-core 7th generation 
Intel desktop CPU and my Linux server has two 12-core Xeon CPUs.  The 
server is quite a bit faster than the desktop. When I looked into one of 
the test failures, it failed with this message, which certainly sounds 
like an issue with test performance:

java.lang.Exception: Custom 'security.json' not applied in 10000ms

If you really do need the build target, you're going to need to install 
python.  Just running python3, from a command prompt, powershell, or 
even the Run box or start menu, will open the python page on the 
Microsoft Store and it's easy to install from there.  Perl is also required.

I need to look into why building no longer works in Git Bash, which is 
part of Git for Windows.  It used to work.

Thanks,
Shawn


Re: Problem in importing project in Eclipse

Posted by Shawn Heisey <ap...@elyograg.org>.
On 11/10/2022 2:39 PM, Shawn Heisey wrote:
> My tests above were done on Ubuntu Server 22.04.  I will try it on a 
> Windows 10 pro machine and reply back if I have any problems with that. 

Installed Strawberry Perl, Git for Windows, and Temurin JDK 17.

The build failed, with a different error than you are getting.

---
 > Task :checkJdkInternalsExportedToGradle FAILED

FAILURE: Build failed with an exception.

* Where:
Script 
'C:\Users\elyograg\git\solr\gradle\generation\local-settings.gradle' 
line: 42

* What went wrong:
Execution failed for task ':checkJdkInternalsExportedToGradle'.
 > Certain gradle tasks and plugins require access to jdk.compiler 
internals, your gradle.properties might have just been generated or 
could be out of sync (see help/localSettings.txt)

* Try:
 > Run with --stacktrace option to get the stack trace.
 > Run with --info or --debug option to get more log output.
 > Run with --scan to get full insights.

* Get more help at https://help.gradle.org

Deprecated Gradle features were used in this build, making it 
incompatible with Gradle 8.0.

You can use '--warning-mode all' to show the individual deprecation 
warnings and determine if they come from your own scripts or plugins.

See 
https://docs.gradle.org/7.5.1/userguide/command_line_interface.html#sec:command_line_warnings

BUILD FAILED in 5m 41s
185 actionable tasks: 185 executed
Error: Something went wrong. Make sure you're using Java 11 - 18.
---

I found that an issue had been filed against something called OpenSearch 
for the same problem.  The fix was apparently this commit:

https://github.com/opensearch-project/OpenSearch/pull/3396/files

So what I tried next was ".\gradlew clean localSettings build" ... and 
that gave me the same error you're getting.

With the --info build option I saw the following.  It might have been 
there before adding --info, but on that build I hadn't scrolled up.

---
 > Task :solr:documentation:checkBrokenLinks FAILED
Caching disabled for task ':solr:documentation:checkBrokenLinks' because:
   Build cache is disabled
Task ':solr:documentation:checkBrokenLinks' is not up-to-date because:
   Task has failed previously.
External tool 'python3' resolved to: python3
Starting process 'command 'python3''. Working directory: 
C:\Users\elyograg\git\solr\solr\documentation Command: python3 -B 
C:\Users\elyograg\git\solr\dev-tools\scripts\checkJavadocLinks.py 
C:\Users\elyograg\git\solr\solr\documentation\build\site
Successfully started process 'command 'python3''
:solr:documentation:checkBrokenLinks (Thread[Execution worker Thread 
3,5,main]) completed. Took 0.383 secs.
---

I manually tried running 'python3' and that fired up the Microsoft Store 
where I could download python.  Which I did, then tried the same gradlew 
command again.

Now it gets past the error you are getting and I am seeing failed tests.

What is your goal with building Solr from source?  If you're trying to 
build something you can run, then you want ".\gradlew clean dev" and if 
you're trying to make a package like what you can download, you want 
".\gradlew clean distTar" or ".\gradlew clean assemble".  These targets 
only require perl, not python. The build target requires python3 and 
runs all the tests, which takes a long time and often fails.  And until 
we can fix the problem in the codebase, if you really do want the build 
target, you will need to add localSettings before it.

Thanks,
Shawn


Re: Problem in importing project in Eclipse

Posted by Shawn Heisey <ap...@elyograg.org>.
On 11/10/22 09:17, Maulin Rathod wrote:
> Hi Joshua,  Shawn
>
> Thanks for your help.
>
> Now I am able to import project in eclipse.
>
> Now when I execute below build command (for main branch) it fails with the
> below exception.
>
> PS D:\solr\SolrReadwrite\solr> ./gradlew build
>
> FAILURE: Build failed with an exception.
>
> Task :solr:documentation:checkBrokenLinks FAILED

I had never actually used the build target.

[final jeopardy music while running "./gradlew build" on a fully 
up-to-date main branch]

BUILD SUCCESSFUL in 21m 20s

That takes a lot longer to run than the "dev" or "distTar" targets, 
which are what I normally use to get something I can either run or 
install.  I occasionally use the "check" target which takes several 
minutes longer than build did.

After I did the above build, I ran "./gradlew clean distTar" and it took 
1m 4s.  The distTar target on main creates a solr-10.0.0-SNAPSHOT.tgz 
file that works just like the binary downloads you can get from the Solr 
website.

You might try doing "./gradlew clean build" instead, to make sure any 
existing build artifacts are gone, or use a different target depending 
on what it is you're after.  Do you have perl installed on the Windows 
machine?  The build system does use perl, and it would need to be on the 
PATH that the command prompt uses.

My tests above were done on Ubuntu Server 22.04.  I will try it on a 
Windows 10 pro machine and reply back if I have any problems with that.

Thanks,
Shawn


Re: Problem in importing project in Eclipse

Posted by Maulin Rathod <mn...@gmail.com>.
Hi Joshua,  Shawn

Thanks for your help.

Now I am able to import project in eclipse.

Now when I execute below build command (for main branch) it fails with the
below exception.

PS D:\solr\SolrReadwrite\solr> ./gradlew build

FAILURE: Build failed with an exception.

Task :solr:documentation:checkBrokenLinks FAILED


In "check-broken-links-output.txt" file it complains about

BROKEN LINK:
file:///D%3A/solr/SolrReadwrite/solr/solr/documentation/build/site/core/org/apache/solr/common.SolrInputDocument.html

Actually SolrInputDocument.html is available in different location. i.e.
instead of "core" its available in "solrj"...

D:\solr\SolrReadwrite\solr\solr\documentation\build\site\solrj\org\apache\solr\common.SolrInputDocument.html


How can I fix this?

On Wed, Nov 9, 2022 at 9:43 PM Joshua Ouma <jo...@gmail.com> wrote:

> To add on Shawn comment after building the project, click on file menu
> then  open projects from file system.
>
> On Wed, Nov 9, 2022 at 6:45 PM Maulin Rathod <mn...@gmail.com> wrote:
>
> > Thanks Joshua. Can you please help with more details (with some steps)
> > about how to import in eclipse?  Or point to some link where steps are
> > mentioned for importing solr project in eclipse?
> >
> >
> >
> > On Wed, Nov 9, 2022 at 8:41 PM Joshua Ouma <jo...@gmail.com>
> wrote:
> >
> > > Hi Mualin,
> > >
> > > After executing the grade task. Don't import as an existing gradle
> > project
> > > but from  folder(not sure of the exact wording)
> > >
> > > On Wed, 9 Nov 2022, 18:02 Maulin Rathod, <mn...@gmail.com> wrote:
> > >
> > > > Hi,
> > > >
> > > > I am a developer with 15 year experience and using Solr for the last
> > 7-8
> > > > years. Now I want to contribute to solr...
> > > >
> > > > I followed the instructions provided on this link to import the
> project
> > > in
> > > > Eclipse.
> > > >
> > > > https://cwiki.apache.org/confluence/display/solr/HowToContribute
> > > >
> > > > After checking the main branch locally (git clone
> > > > http://gitbox.apache.org/repos/asf/solr.git), when I import (using
> > > *Existing
> > > > Gradle Project* option) in eclipse, the build process is stuck at
> > around
> > > > 5% with thousands of errors. Refer below screenshot.
> > > >
> > > > Am I missing something? Please help...
> > > >
> > > >
> > > > [image: image.png]
> > > >
> > >
> >
> >
> > --
> > Regards,
> >
> > Maulin Rathod
> > Development Director
> > Asite Solution Pvt Ltd.
> >
> > M: 9723286945
> > E : mnrathod@gmail.com
> > W: www.asite.com
> >
>


-- 
Regards,

Maulin Rathod
Development Director
Asite Solution Pvt Ltd.

M: 9723286945
E : mnrathod@gmail.com
W: www.asite.com

Re: Problem in importing project in Eclipse

Posted by Joshua Ouma <jo...@gmail.com>.
To add on Shawn comment after building the project, click on file menu
then  open projects from file system.

On Wed, Nov 9, 2022 at 6:45 PM Maulin Rathod <mn...@gmail.com> wrote:

> Thanks Joshua. Can you please help with more details (with some steps)
> about how to import in eclipse?  Or point to some link where steps are
> mentioned for importing solr project in eclipse?
>
>
>
> On Wed, Nov 9, 2022 at 8:41 PM Joshua Ouma <jo...@gmail.com> wrote:
>
> > Hi Mualin,
> >
> > After executing the grade task. Don't import as an existing gradle
> project
> > but from  folder(not sure of the exact wording)
> >
> > On Wed, 9 Nov 2022, 18:02 Maulin Rathod, <mn...@gmail.com> wrote:
> >
> > > Hi,
> > >
> > > I am a developer with 15 year experience and using Solr for the last
> 7-8
> > > years. Now I want to contribute to solr...
> > >
> > > I followed the instructions provided on this link to import the project
> > in
> > > Eclipse.
> > >
> > > https://cwiki.apache.org/confluence/display/solr/HowToContribute
> > >
> > > After checking the main branch locally (git clone
> > > http://gitbox.apache.org/repos/asf/solr.git), when I import (using
> > *Existing
> > > Gradle Project* option) in eclipse, the build process is stuck at
> around
> > > 5% with thousands of errors. Refer below screenshot.
> > >
> > > Am I missing something? Please help...
> > >
> > >
> > > [image: image.png]
> > >
> >
>
>
> --
> Regards,
>
> Maulin Rathod
> Development Director
> Asite Solution Pvt Ltd.
>
> M: 9723286945
> E : mnrathod@gmail.com
> W: www.asite.com
>

Re: Problem in importing project in Eclipse

Posted by Maulin Rathod <mn...@gmail.com>.
Thanks Joshua. Can you please help with more details (with some steps)
about how to import in eclipse?  Or point to some link where steps are
mentioned for importing solr project in eclipse?



On Wed, Nov 9, 2022 at 8:41 PM Joshua Ouma <jo...@gmail.com> wrote:

> Hi Mualin,
>
> After executing the grade task. Don't import as an existing gradle project
> but from  folder(not sure of the exact wording)
>
> On Wed, 9 Nov 2022, 18:02 Maulin Rathod, <mn...@gmail.com> wrote:
>
> > Hi,
> >
> > I am a developer with 15 year experience and using Solr for the last 7-8
> > years. Now I want to contribute to solr...
> >
> > I followed the instructions provided on this link to import the project
> in
> > Eclipse.
> >
> > https://cwiki.apache.org/confluence/display/solr/HowToContribute
> >
> > After checking the main branch locally (git clone
> > http://gitbox.apache.org/repos/asf/solr.git), when I import (using
> *Existing
> > Gradle Project* option) in eclipse, the build process is stuck at around
> > 5% with thousands of errors. Refer below screenshot.
> >
> > Am I missing something? Please help...
> >
> >
> > [image: image.png]
> >
>


-- 
Regards,

Maulin Rathod
Development Director
Asite Solution Pvt Ltd.

M: 9723286945
E : mnrathod@gmail.com
W: www.asite.com

Re: Problem in importing project in Eclipse

Posted by Joshua Ouma <jo...@gmail.com>.
Hi Mualin,

After executing the grade task. Don't import as an existing gradle project
but from  folder(not sure of the exact wording)

On Wed, 9 Nov 2022, 18:02 Maulin Rathod, <mn...@gmail.com> wrote:

> Hi,
>
> I am a developer with 15 year experience and using Solr for the last 7-8
> years. Now I want to contribute to solr...
>
> I followed the instructions provided on this link to import the project in
> Eclipse.
>
> https://cwiki.apache.org/confluence/display/solr/HowToContribute
>
> After checking the main branch locally (git clone
> http://gitbox.apache.org/repos/asf/solr.git), when I import (using *Existing
> Gradle Project* option) in eclipse, the build process is stuck at around
> 5% with thousands of errors. Refer below screenshot.
>
> Am I missing something? Please help...
>
>
> [image: image.png]
>