You are viewing a plain text version of this content. The canonical link for it is here.
Posted to derby-dev@db.apache.org by Kristian Waagan <kr...@oracle.com> on 2010/10/08 16:43:37 UTC
Status for missing steps for the 10.6.2.1 release
Hi Lily,
It's a bit unclear to me whether work is under way to complete the
release process for Derby 10.6.2.1.
For instance, the work for items 5, 8, 10, 11, 12, and 13 in [1] (see
section "After a successful vote") seems not to have taken place. Note
that I haven't checked the status for the other items. I can't see the
Maven artifacts for the release, but they may have been generated
already for all I know (it takes a while before they make their way into
the repositories).
You'll probably need help with some of the tasks, for instance 12, just
ask on the dev list.
Regards,
--
Kristian
[1] http://wiki.apache.org/db-derby/DerbySnapshotOrRelease
Re: Status for missing steps for the 10.6.2.1 release
Posted by Lily Wei <li...@yahoo.com>.
Hi Kristian:
Thank you so much for generating the Maven artifacts for Derby 10.6.2.1. It
looks like it did not propagated to the Maven repositories yet. I will keep
verifying and keep going from there for Derby 10.6.2.1 release.
I will help out figuring out how to setup a pure Windows environment to do
this and having your help is a privilege.
Cheers,
Lily
________________________________
From: Kristian Waagan <kr...@oracle.com>
To: derby-dev@db.apache.org
Sent: Tue, October 12, 2010 1:30:07 AM
Subject: Re: Status for missing steps for the 10.6.2.1 release
On 11.10.10 15:40, Lily Wei wrote:
Hi Kristian:
> It is so good to hear from you.
>Thank you for the detail information.
>I went ahead and start the process on 'mvn clean install'. As you
>correctly point out, it
>will not work due to not setting up properly for the username. I try a
>lot of way internet suggest
>and none of them work. I am stuck at this point. Will you mind generate
>the Maven artifacts for me?
>
Hi Lily,
I have now generated the Maven artifacts for Derby 10.6.2.1.
If anyone wants to figure out how to do this in a pure Windows environment
(i.e. non-Cygwin) I can probably help out with a few tips to aid the
debugging.
Cheers,
--
Kristian
>Thank you so much,
>Lily
>
>
>
>
>
>
________________________________
From: Kristian Waagan <kr...@oracle.com>
>To: derby-dev@db.apache.org
>Sent: Mon, October 11, 2010 12:20:22 AM
>Subject: Re: Status for missing steps for the 10.6.2.1 release
>
>On 08.10.10 20:16, Lily Wei wrote:
>>
>> Hi Kristian:
>> Sorry for lack of status.
>>
>> I am still making the release. I am at step 4 after a
>>successful which is deploy to Maven repository.
>>
>> You are way ahead of me. J
>>
>
>Hi Lily,
>
>No problem, I was just surprised to see some steps missing even
>though I knew the release was out.
>I don't really have a feeling for when these steps should be done -
>i.e. the same day as the binaries went out, within one week or
>within two weeks after...
>
>> For step 4:
>> Running SetDerbyVersion generate message as:
>> 'POM version tags replacement succeeded.
>>
>> It is recommended that you verify the POM diffs before running
>>Maven.’
>>
>> However, I am not sure where to find the diff under maven2. Can
>>anyone shed some lights on this?
>>
>
>Just do "svn diff maven2" (or "svn diff" from within the maven2
>directory).
>The diff should consist of changes to the version tag within the
>various POMs.
>
>> Also, I only set up my ssh so it can do ssh lilywei@people.apache.org
>><ma...@people.apache.org> without password.
>>
>> My username at Windows is different than my user name at
>>people.apache.org. Will that create a problem for me?
>>
>
>I think you'll get into trouble with that... ASF will probably block
>your IP, because of too many failed login attempts.
>If anyone wants to improve the notes for releasing Maven artifacts
>from Windows, I would recommend to replace the deployment URL to
>point it at a local *nix machine running an SSH daemon for testing.
>I found that to be the easiest debug approach, as I could read the
>SSH daemon logs to see which user name was being used etc.
>
>I had the same issue when testing out the artifact release steps,
>and I had to add the following to my SSH config:
>$ cat ~/.ssh/config
>Host people.apache.org
> User <my_user_name_here>
>
>No matter which option I used in Maven I could not get it to use the
>specified user name over my local user name. There are options to
>control this, but I couldn't get them to work.
>Maybe this has been fixed by now?
>I don't remember if I tried to specify the user name as part of the
>deployment URL.
>
>If you get stuck, let me know and I'll generate the Maven artifacts
>for you. Since we're in different time zones, it may take up to 24
>hours before things will happen.
>
>
>Regards,
>-- Kristian
>
>>
>> Thanks,
>>
>> Lily
>>
>>
>>------------------------------------------------------------------------
>> *From:* Kristian Waagan <kr...@oracle.com>
>> *To:* Derby Development <de...@db.apache.org>
>> *Sent:* Fri, October 8, 2010 7:43:37 AM
>> *Subject:* Status for missing steps for the 10.6.2.1 release
>>
>> Hi Lily,
>>
>> It's a bit unclear to me whether work is under way to complete the
>>release process for Derby 10.6.2.1.
>>
>> For instance, the work for items 5, 8, 10, 11, 12, and 13 in [1]
>>(see section "After a successful vote") seems not to have taken
>>place. Note that I haven't checked the status for the other items. I
>>can't see the Maven artifacts for the release, but they may have
>>been generated already for all I know (it takes a while before they
>>make their way into the repositories).
>>
>> You'll probably need help with some of the tasks, for instance 12,
>>just ask on the dev list.
>>
>>
>> Regards,
>> -- Kristian
>>
>> [1] http://wiki.apache.org/db-derby/DerbySnapshotOrRelease
>>
>
>
>
Re: Status for missing steps for the 10.6.2.1 release
Posted by Kristian Waagan <kr...@oracle.com>.
On 11.10.10 15:40, Lily Wei wrote:
> Hi Kristian:
> It is so good to hear from you.
> Thank you for the detail information.
> I went ahead and start the process on 'mvn clean install'. As you
> correctly point out, it
> will not work due to not setting up properly for the username. I try a
> lot of way internet suggest
> and none of them work. I am stuck at this point. Will you mind
> generate the Maven artifacts for me?
Hi Lily,
I have now generated the Maven artifacts for Derby 10.6.2.1.
If anyone wants to figure out how to do this in a pure Windows
environment (i.e. non-Cygwin) I can probably help out with a few tips to
aid the debugging.
Cheers,
--
Kristian
>
> Thank you so much,
> Lily
>
>
> ------------------------------------------------------------------------
> *From:* Kristian Waagan <kr...@oracle.com>
> *To:* derby-dev@db.apache.org
> *Sent:* Mon, October 11, 2010 12:20:22 AM
> *Subject:* Re: Status for missing steps for the 10.6.2.1 release
>
> On 08.10.10 20:16, Lily Wei wrote:
> >
> > Hi Kristian:
> > Sorry for lack of status.
> >
> > I am still making the release. I am at step 4 after a
> successful which is deploy to Maven repository.
> >
> > You are way ahead of me. J
> >
>
> Hi Lily,
>
> No problem, I was just surprised to see some steps missing even though
> I knew the release was out.
> I don't really have a feeling for when these steps should be done -
> i.e. the same day as the binaries went out, within one week or within
> two weeks after...
>
> > For step 4:
> > Running SetDerbyVersion generate message as:
> > 'POM version tags replacement succeeded.
> >
> > It is recommended that you verify the POM diffs before running Maven.’
> >
> > However, I am not sure where to find the diff under maven2. Can
> anyone shed some lights on this?
> >
>
> Just do "svn diff maven2" (or "svn diff" from within the maven2
> directory).
> The diff should consist of changes to the version tag within the
> various POMs.
>
> > Also, I only set up my ssh so it can do ssh
> lilywei@people.apache.org <ma...@people.apache.org>
> <mailto:lilywei@people.apache.org <ma...@people.apache.org>>
> without password.
> >
> > My username at Windows is different than my user name at
> people.apache.org <http://people.apache.org>. Will that create a
> problem for me?
> >
>
> I think you'll get into trouble with that... ASF will probably block
> your IP, because of too many failed login attempts.
> If anyone wants to improve the notes for releasing Maven artifacts
> from Windows, I would recommend to replace the deployment URL to point
> it at a local *nix machine running an SSH daemon for testing. I found
> that to be the easiest debug approach, as I could read the SSH daemon
> logs to see which user name was being used etc.
>
> I had the same issue when testing out the artifact release steps, and
> I had to add the following to my SSH config:
> $ cat ~/.ssh/config
> Host people.apache.org
> User <my_user_name_here>
>
> No matter which option I used in Maven I could not get it to use the
> specified user name over my local user name. There are options to
> control this, but I couldn't get them to work.
> Maybe this has been fixed by now?
> I don't remember if I tried to specify the user name as part of the
> deployment URL.
>
> If you get stuck, let me know and I'll generate the Maven artifacts
> for you. Since we're in different time zones, it may take up to 24
> hours before things will happen.
>
>
> Regards,
> -- Kristian
>
> >
> > Thanks,
> >
> > Lily
> >
> > ------------------------------------------------------------------------
> > *From:* Kristian Waagan <kristian.waagan@oracle.com
> <ma...@oracle.com>>
> > *To:* Derby Development <derby-dev@db.apache.org
> <ma...@db.apache.org>>
> > *Sent:* Fri, October 8, 2010 7:43:37 AM
> > *Subject:* Status for missing steps for the 10.6.2.1 release
> >
> > Hi Lily,
> >
> > It's a bit unclear to me whether work is under way to complete the
> release process for Derby 10.6.2.1.
> >
> > For instance, the work for items 5, 8, 10, 11, 12, and 13 in [1]
> (see section "After a successful vote") seems not to have taken place.
> Note that I haven't checked the status for the other items. I can't
> see the Maven artifacts for the release, but they may have been
> generated already for all I know (it takes a while before they make
> their way into the repositories).
> >
> > You'll probably need help with some of the tasks, for instance 12,
> just ask on the dev list.
> >
> >
> > Regards,
> > -- Kristian
> >
> > [1] http://wiki.apache.org/db-derby/DerbySnapshotOrRelease
> >
>
>
Re: Status for missing steps for the 10.6.2.1 release
Posted by Lily Wei <li...@yahoo.com>.
Hi Kristian:
It is so good to hear from you.
Thank you for the detail information.
I went ahead and start the process on 'mvn clean install'. As you correctly
point out, it
will not work due to not setting up properly for the username. I try a lot of
way internet suggest
and none of them work. I am stuck at this point. Will you mind generate the
Maven artifacts for me?
Thank you so much,
Lily
________________________________
From: Kristian Waagan <kr...@oracle.com>
To: derby-dev@db.apache.org
Sent: Mon, October 11, 2010 12:20:22 AM
Subject: Re: Status for missing steps for the 10.6.2.1 release
On 08.10.10 20:16, Lily Wei wrote:
>
> Hi Kristian:
> Sorry for lack of status.
>
> I am still making the release. I am at step 4 after a successful which is
>deploy to Maven repository.
>
> You are way ahead of me. J
>
Hi Lily,
No problem, I was just surprised to see some steps missing even though I knew
the release was out.
I don't really have a feeling for when these steps should be done - i.e. the
same day as the binaries went out, within one week or within two weeks after...
> For step 4:
> Running SetDerbyVersion generate message as:
> 'POM version tags replacement succeeded.
>
> It is recommended that you verify the POM diffs before running Maven.’
>
> However, I am not sure where to find the diff under maven2. Can anyone shed
>some lights on this?
>
Just do "svn diff maven2" (or "svn diff" from within the maven2 directory).
The diff should consist of changes to the version tag within the various POMs.
> Also, I only set up my ssh so it can do ssh lilywei@people.apache.org
><ma...@people.apache.org> without password.
>
> My username at Windows is different than my user name at people.apache.org.
>Will that create a problem for me?
>
I think you'll get into trouble with that... ASF will probably block your IP,
because of too many failed login attempts.
If anyone wants to improve the notes for releasing Maven artifacts from Windows,
I would recommend to replace the deployment URL to point it at a local *nix
machine running an SSH daemon for testing. I found that to be the easiest debug
approach, as I could read the SSH daemon logs to see which user name was being
used etc.
I had the same issue when testing out the artifact release steps, and I had to
add the following to my SSH config:
$ cat ~/.ssh/config
Host people.apache.org
User <my_user_name_here>
No matter which option I used in Maven I could not get it to use the specified
user name over my local user name. There are options to control this, but I
couldn't get them to work.
Maybe this has been fixed by now?
I don't remember if I tried to specify the user name as part of the deployment
URL.
If you get stuck, let me know and I'll generate the Maven artifacts for you.
Since we're in different time zones, it may take up to 24 hours before things
will happen.
Regards,
-- Kristian
>
> Thanks,
>
> Lily
>
> ------------------------------------------------------------------------
> *From:* Kristian Waagan <kr...@oracle.com>
> *To:* Derby Development <de...@db.apache.org>
> *Sent:* Fri, October 8, 2010 7:43:37 AM
> *Subject:* Status for missing steps for the 10.6.2.1 release
>
> Hi Lily,
>
> It's a bit unclear to me whether work is under way to complete the release
>process for Derby 10.6.2.1.
>
> For instance, the work for items 5, 8, 10, 11, 12, and 13 in [1] (see section
>"After a successful vote") seems not to have taken place. Note that I haven't
>checked the status for the other items. I can't see the Maven artifacts for the
>release, but they may have been generated already for all I know (it takes a
>while before they make their way into the repositories).
>
> You'll probably need help with some of the tasks, for instance 12, just ask on
>the dev list.
>
>
> Regards,
> -- Kristian
>
> [1] http://wiki.apache.org/db-derby/DerbySnapshotOrRelease
>
Re: Status for missing steps for the 10.6.2.1 release
Posted by Kristian Waagan <kr...@oracle.com>.
On 08.10.10 20:16, Lily Wei wrote:
>
> Hi Kristian:
> Sorry for lack of status.
>
> I am still making the release. I am at step 4 after a successful
> which is deploy to Maven repository.
>
> You are way ahead of me. J
>
Hi Lily,
No problem, I was just surprised to see some steps missing even though I
knew the release was out.
I don't really have a feeling for when these steps should be done - i.e.
the same day as the binaries went out, within one week or within two
weeks after...
> For step 4:
> Running SetDerbyVersion generate message as:
> 'POM version tags replacement succeeded.
>
> It is recommended that you verify the POM diffs before running Maven.’
>
> However, I am not sure where to find the diff under maven2. Can anyone
> shed some lights on this?
>
Just do "svn diff maven2" (or "svn diff" from within the maven2 directory).
The diff should consist of changes to the version tag within the various
POMs.
> Also, I only set up my ssh so it can do ssh lilywei@people.apache.org
> <ma...@people.apache.org> without password.
>
> My username at Windows is different than my user name at
> people.apache.org. Will that create a problem for me?
>
I think you'll get into trouble with that... ASF will probably block
your IP, because of too many failed login attempts.
If anyone wants to improve the notes for releasing Maven artifacts from
Windows, I would recommend to replace the deployment URL to point it at
a local *nix machine running an SSH daemon for testing. I found that to
be the easiest debug approach, as I could read the SSH daemon logs to
see which user name was being used etc.
I had the same issue when testing out the artifact release steps, and I
had to add the following to my SSH config:
$ cat ~/.ssh/config
Host people.apache.org
User <my_user_name_here>
No matter which option I used in Maven I could not get it to use the
specified user name over my local user name. There are options to
control this, but I couldn't get them to work.
Maybe this has been fixed by now?
I don't remember if I tried to specify the user name as part of the
deployment URL.
If you get stuck, let me know and I'll generate the Maven artifacts for
you. Since we're in different time zones, it may take up to 24 hours
before things will happen.
Regards,
--
Kristian
>
> Thanks,
>
> Lily
>
> ------------------------------------------------------------------------
> *From:* Kristian Waagan <kr...@oracle.com>
> *To:* Derby Development <de...@db.apache.org>
> *Sent:* Fri, October 8, 2010 7:43:37 AM
> *Subject:* Status for missing steps for the 10.6.2.1 release
>
> Hi Lily,
>
> It's a bit unclear to me whether work is under way to complete the
> release process for Derby 10.6.2.1.
>
> For instance, the work for items 5, 8, 10, 11, 12, and 13 in [1] (see
> section "After a successful vote") seems not to have taken place. Note
> that I haven't checked the status for the other items. I can't see the
> Maven artifacts for the release, but they may have been generated
> already for all I know (it takes a while before they make their way
> into the repositories).
>
> You'll probably need help with some of the tasks, for instance 12,
> just ask on the dev list.
>
>
> Regards,
> -- Kristian
>
> [1] http://wiki.apache.org/db-derby/DerbySnapshotOrRelease
>
Re: Status for missing steps for the 10.6.2.1 release
Posted by Lily Wei <li...@yahoo.com>.
Hi Kristian:
Sorry for lack of status.
I am still making the release. I am at step 4 after a successful which is
deploy to Maven repository.
You are way ahead of me. J
For step 4:
Running SetDerbyVersion generate message as:
'POM version tags replacement succeeded.
It is recommended that you verify the POM diffs before running Maven.’
However, I am not sure where to find the diff under maven2. Can anyone shed
some lights on this?
Also, I only set up my ssh so it can do ssh lilywei@people.apache.org
without password.
My username at Windows is different than my user name at people.apache.org. Will
that create a problem for me?
Thanks,
Lily
________________________________
From: Kristian Waagan <kr...@oracle.com>
To: Derby Development <de...@db.apache.org>
Sent: Fri, October 8, 2010 7:43:37 AM
Subject: Status for missing steps for the 10.6.2.1 release
Hi Lily,
It's a bit unclear to me whether work is under way to complete the release
process for Derby 10.6.2.1.
For instance, the work for items 5, 8, 10, 11, 12, and 13 in [1] (see section
"After a successful vote") seems not to have taken place. Note that I haven't
checked the status for the other items. I can't see the Maven artifacts for the
release, but they may have been generated already for all I know (it takes a
while before they make their way into the repositories).
You'll probably need help with some of the tasks, for instance 12, just ask on
the dev list.
Regards,
-- Kristian
[1] http://wiki.apache.org/db-derby/DerbySnapshotOrRelease