You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@openoffice.apache.org by Jim Jagielski <ji...@jaguNET.com> on 2020/11/19 16:49:21 UTC
New EPM Maintainer... me!
AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
We now have canon versions of dmake and EPM available via my GitHub account.
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
For additional commands, e-mail: dev-help@openoffice.apache.org
Re: New EPM Maintainer... me!
Posted by Matthias Seidel <ma...@hamburg.de>.
Hi all,
Am 21.11.20 um 09:46 schrieb Peter Kovacs:
>
> On 20.11.20 16:54, Jim Jagielski wrote:
>> With this in mind, I will be adjusting AOO trunk and AOO42X to
>> require this newer version. Once I release EPM v5.0.0, I will make
>> those changes.
> I am also using your work already. :)
I also configured our Linux buildbots to use EPM 5.0 now...
Both bots had an error during build time. No error message during ./config.
I will force a new build now.
Matthias
>>
>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>
>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>> AOO is pretty heavily dependent on EPM to create our community
>>>> builds for Linux and macOS. Unfortunately, EPM has been,
>>>> heretofore, only in maintenance mode. I contacted Michael R Sweet,
>>>> the creator, and offered to "take over" development and
>>>> maintenance, and he graciously agreed!
>>>> We now have canon versions of dmake and EPM available via my GitHub
>>>> account.
>
> strangely enough Arch and ubuntu are listing http://www.epmhome.org
> <http://www.epmhome.org> as upstream site.
>
> Was there a split?
>
> I will check and see if there are differences.
>
>
>
Re: New EPM Maintainer... me!
Posted by Mechtilde <oo...@mechtilde.de>.
hello,
Am 21.11.20 um 20:12 schrieb Matthias Seidel:
> Hi Jim,
>
> The Linux buildbots do not build with EPM 5.0.0.
>
> See error text here:
>
> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>
> This is on Ubuntu 16.04(?) and
>
> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
I had the same problem.
then i start two times: build --all:epm
and then it works. Woodoo??
So I hope there is a better solution
Regards
Mechtilde
>
> Regards,
>
> Matthias
>
> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>
>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>
>>>
>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>> I am also using your work already. :)
>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>
>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>
>>> Was there a split?
>>>
>>> I will check and see if there are differences.
>>
>> Weird... the owner is: https://www.msweet.org/epm/
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>
>
--
Mechtilde Stehmann
## Apache OpenOffice
## Freie Office Suite für Linux, MacOSX, Windows und OS/2
## Debian Developer
## PGP encryption welcome
## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
Re: New EPM Maintainer... me!
Posted by Matthias Seidel <ma...@hamburg.de>.
Hi Jim,
Am 26.11.20 um 17:35 schrieb Jim Jagielski:
> Yeah, all that is because of the weird way GitHub names "releases"... We hit the same thing w/ EPM as you may recall. With DMAKE 4.13.0, all that will be fixed.
Thanks!
I solved it for the moment by renaming the directory inside the .tar.gz.
Build went well...
Regards,
Matthias
>
>> On Nov 25, 2020, at 4:40 PM, Matthias Seidel <ma...@hamburg.de> wrote:
>>
>> Hi Jim,
>>
>> With dmake-4.12.3 I have following problem when trying to build on Windows:
>>
>> ---
>>
>> dmake-4.12.3.tar.gz exists
>> making and entering
>> C:/Source/openoffice/main/solenv/wntmsci12.pro/misc/build/
>> unpacking
>> /cygdrive/c/Source/openoffice/ext_sources/ca4edd7ad978ed095f417f1be8669bf4-dmake-4.12.3.tar.gz
>> entering dmake-4.12.3
>> ./bootstrap: line 121: cd: dmake-4.12.3: No such file or directory
>>
>> ---
>>
>> The directory created is: dmake-dmake-4.12.3
>>
>> Regards,
>>
>> Matthias
>>
>> Am 25.11.20 um 17:08 schrieb Jim Jagielski:
>>> FWIW, I'm also working on my latest release of DMAKE as well: 4.13.0
>>>
>>> https://github.com/jimjag/dmake
>>>
>>>> On Nov 24, 2020, at 6:30 AM, Mechtilde <oo...@mechtilde.de> wrote:
>>>>
>>>> Hello
>>>>
>>>> Am 23.11.20 um 21:19 schrieb Matthias Seidel:
>>>>> Sorry, I forgot to update the URL:
>>>>>
>>>>> https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz <https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz>
>>>> and I forgot to delete the old file.
>>>>
>>>> Now it builds well
>>>>> Forced a new build now.
>>>>>
>>>>> Matthias
>>>>>
>>>>> Am 23.11.20 um 21:01 schrieb Matthias Seidel:
>>>>>> Hi Jim,
>>>>>>
>>>>>> The buildbot still fails:
>>>>>>
>>>>>> https://ci.apache.org/projects/openoffice/buildlogs/41x/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>>>>
>>>>>> Matthias
>>>>>>
>>>>>> Am 23.11.20 um 13:27 schrieb Jim Jagielski:
>>>>>>> My guess is that name of the tarball isn;'t the name of the resulting directory and that is causing confusion.
>>>>>>>
>>>>>>> I'll try to see how to have GitHub name the tarball epm-5.0.0.tar.gz/epm-5.0.0.zip
>>>>>>>
>>>>>>>> On Nov 21, 2020, at 2:32 PM, Mechtilde <oo...@mechtilde.de> wrote:
>>>>>>>>
>>>>>>>> hello,
>>>>>>>>
>>>>>>>>
>>>>>>>> Am 21.11.20 um 20:12 schrieb Matthias Seidel:
>>>>>>>>> Hi Jim,
>>>>>>>>>
>>>>>>>>> The Linux buildbots do not build with EPM 5.0.0.
>>>>>>>>>
>>>>>>>>> See error text here:
>>>>>>>>>
>>>>>>>>> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>>>>>>>
>>>>>>>>> This is on Ubuntu 16.04(?) and
>>>>>>>>>
>>>>>>>>> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
>>>>>>>> I had the same problem.
>>>>>>>>
>>>>>>>> then i start two times: build --all:epm
>>>>>>>>
>>>>>>>> and then it works. Woodoo??
>>>>>>>>
>>>>>>>> No, it breaks again!
>>>>>>>>
>>>>>>>>
>>>>>>>> So I hope there is a better solution
>>>>>>>>
>>>>>>>>
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> Mechtilde
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> Matthias
>>>>>>>>>
>>>>>>>>> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>>>>>>>>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>>>>>>>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>>>>>>>>>> I am also using your work already. :)
>>>>>>>>>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>>>>>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>>>>>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>>>>>>>>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>>>>>>>>>
>>>>>>>>>>> Was there a split?
>>>>>>>>>>>
>>>>>>>>>>> I will check and see if there are differences.
>>>>>>>>>> Weird... the owner is: https://www.msweet.org/epm/
>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>>>>>>>>>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>>>>>>>>>
>>>>>>>> --
>>>>>>>> Mechtilde Stehmann
>>>>>>>> ## Apache OpenOffice
>>>>>>>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>>>>>>>> ## Debian Developer
>>>>>>>> ## PGP encryption welcome
>>>>>>>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>>>> --
>>>> Mechtilde Stehmann
>>>> ## Apache OpenOffice
>>>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>>>> ## Debian Developer
>>>> ## PGP encryption welcome
>>>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
> For additional commands, e-mail: dev-help@openoffice.apache.org
>
Re: New EPM Maintainer... me!
Posted by Jim Jagielski <ji...@jaguNET.com>.
Yeah, all that is because of the weird way GitHub names "releases"... We hit the same thing w/ EPM as you may recall. With DMAKE 4.13.0, all that will be fixed.
> On Nov 25, 2020, at 4:40 PM, Matthias Seidel <ma...@hamburg.de> wrote:
>
> Hi Jim,
>
> With dmake-4.12.3 I have following problem when trying to build on Windows:
>
> ---
>
> dmake-4.12.3.tar.gz exists
> making and entering
> C:/Source/openoffice/main/solenv/wntmsci12.pro/misc/build/
> unpacking
> /cygdrive/c/Source/openoffice/ext_sources/ca4edd7ad978ed095f417f1be8669bf4-dmake-4.12.3.tar.gz
> entering dmake-4.12.3
> ./bootstrap: line 121: cd: dmake-4.12.3: No such file or directory
>
> ---
>
> The directory created is: dmake-dmake-4.12.3
>
> Regards,
>
> Matthias
>
> Am 25.11.20 um 17:08 schrieb Jim Jagielski:
>> FWIW, I'm also working on my latest release of DMAKE as well: 4.13.0
>>
>> https://github.com/jimjag/dmake
>>
>>> On Nov 24, 2020, at 6:30 AM, Mechtilde <oo...@mechtilde.de> wrote:
>>>
>>> Hello
>>>
>>> Am 23.11.20 um 21:19 schrieb Matthias Seidel:
>>>> Sorry, I forgot to update the URL:
>>>>
>>>> https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz <https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz>
>>> and I forgot to delete the old file.
>>>
>>> Now it builds well
>>>> Forced a new build now.
>>>>
>>>> Matthias
>>>>
>>>> Am 23.11.20 um 21:01 schrieb Matthias Seidel:
>>>>> Hi Jim,
>>>>>
>>>>> The buildbot still fails:
>>>>>
>>>>> https://ci.apache.org/projects/openoffice/buildlogs/41x/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>>>
>>>>> Matthias
>>>>>
>>>>> Am 23.11.20 um 13:27 schrieb Jim Jagielski:
>>>>>> My guess is that name of the tarball isn;'t the name of the resulting directory and that is causing confusion.
>>>>>>
>>>>>> I'll try to see how to have GitHub name the tarball epm-5.0.0.tar.gz/epm-5.0.0.zip
>>>>>>
>>>>>>> On Nov 21, 2020, at 2:32 PM, Mechtilde <oo...@mechtilde.de> wrote:
>>>>>>>
>>>>>>> hello,
>>>>>>>
>>>>>>>
>>>>>>> Am 21.11.20 um 20:12 schrieb Matthias Seidel:
>>>>>>>> Hi Jim,
>>>>>>>>
>>>>>>>> The Linux buildbots do not build with EPM 5.0.0.
>>>>>>>>
>>>>>>>> See error text here:
>>>>>>>>
>>>>>>>> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>>>>>>
>>>>>>>> This is on Ubuntu 16.04(?) and
>>>>>>>>
>>>>>>>> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
>>>>>>> I had the same problem.
>>>>>>>
>>>>>>> then i start two times: build --all:epm
>>>>>>>
>>>>>>> and then it works. Woodoo??
>>>>>>>
>>>>>>> No, it breaks again!
>>>>>>>
>>>>>>>
>>>>>>> So I hope there is a better solution
>>>>>>>
>>>>>>>
>>>>>>> Regards
>>>>>>>
>>>>>>> Mechtilde
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Matthias
>>>>>>>>
>>>>>>>> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>>>>>>>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>>>>>>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>>>>>>>>> I am also using your work already. :)
>>>>>>>>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>>>>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>>>>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>>>>>>>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>>>>>>>>
>>>>>>>>>> Was there a split?
>>>>>>>>>>
>>>>>>>>>> I will check and see if there are differences.
>>>>>>>>> Weird... the owner is: https://www.msweet.org/epm/
>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>>>>>>>>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>>>>>>>>
>>>>>>> --
>>>>>>> Mechtilde Stehmann
>>>>>>> ## Apache OpenOffice
>>>>>>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>>>>>>> ## Debian Developer
>>>>>>> ## PGP encryption welcome
>>>>>>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>>> --
>>> Mechtilde Stehmann
>>> ## Apache OpenOffice
>>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>>> ## Debian Developer
>>> ## PGP encryption welcome
>>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
For additional commands, e-mail: dev-help@openoffice.apache.org
Re: New EPM Maintainer... me!
Posted by Matthias Seidel <ma...@hamburg.de>.
Hi Jim,
With dmake-4.12.3 I have following problem when trying to build on Windows:
---
dmake-4.12.3.tar.gz exists
making and entering
C:/Source/openoffice/main/solenv/wntmsci12.pro/misc/build/
unpacking
/cygdrive/c/Source/openoffice/ext_sources/ca4edd7ad978ed095f417f1be8669bf4-dmake-4.12.3.tar.gz
entering dmake-4.12.3
./bootstrap: line 121: cd: dmake-4.12.3: No such file or directory
---
The directory created is: dmake-dmake-4.12.3
Regards,
Matthias
Am 25.11.20 um 17:08 schrieb Jim Jagielski:
> FWIW, I'm also working on my latest release of DMAKE as well: 4.13.0
>
> https://github.com/jimjag/dmake
>
>> On Nov 24, 2020, at 6:30 AM, Mechtilde <oo...@mechtilde.de> wrote:
>>
>> Hello
>>
>> Am 23.11.20 um 21:19 schrieb Matthias Seidel:
>>> Sorry, I forgot to update the URL:
>>>
>>> https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz <https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz>
>> and I forgot to delete the old file.
>>
>> Now it builds well
>>> Forced a new build now.
>>>
>>> Matthias
>>>
>>> Am 23.11.20 um 21:01 schrieb Matthias Seidel:
>>>> Hi Jim,
>>>>
>>>> The buildbot still fails:
>>>>
>>>> https://ci.apache.org/projects/openoffice/buildlogs/41x/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>>
>>>> Matthias
>>>>
>>>> Am 23.11.20 um 13:27 schrieb Jim Jagielski:
>>>>> My guess is that name of the tarball isn;'t the name of the resulting directory and that is causing confusion.
>>>>>
>>>>> I'll try to see how to have GitHub name the tarball epm-5.0.0.tar.gz/epm-5.0.0.zip
>>>>>
>>>>>> On Nov 21, 2020, at 2:32 PM, Mechtilde <oo...@mechtilde.de> wrote:
>>>>>>
>>>>>> hello,
>>>>>>
>>>>>>
>>>>>> Am 21.11.20 um 20:12 schrieb Matthias Seidel:
>>>>>>> Hi Jim,
>>>>>>>
>>>>>>> The Linux buildbots do not build with EPM 5.0.0.
>>>>>>>
>>>>>>> See error text here:
>>>>>>>
>>>>>>> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>>>>>
>>>>>>> This is on Ubuntu 16.04(?) and
>>>>>>>
>>>>>>> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
>>>>>> I had the same problem.
>>>>>>
>>>>>> then i start two times: build --all:epm
>>>>>>
>>>>>> and then it works. Woodoo??
>>>>>>
>>>>>> No, it breaks again!
>>>>>>
>>>>>>
>>>>>> So I hope there is a better solution
>>>>>>
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Mechtilde
>>>>>>> Regards,
>>>>>>>
>>>>>>> Matthias
>>>>>>>
>>>>>>> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>>>>>>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>>>>>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>>>>>>>> I am also using your work already. :)
>>>>>>>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>>>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>>>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>>>>>>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>>>>>>>
>>>>>>>>> Was there a split?
>>>>>>>>>
>>>>>>>>> I will check and see if there are differences.
>>>>>>>> Weird... the owner is: https://www.msweet.org/epm/
>>>>>>>> ---------------------------------------------------------------------
>>>>>>>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>>>>>>>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>>>>>>>
>>>>>> --
>>>>>> Mechtilde Stehmann
>>>>>> ## Apache OpenOffice
>>>>>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>>>>>> ## Debian Developer
>>>>>> ## PGP encryption welcome
>>>>>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>> --
>> Mechtilde Stehmann
>> ## Apache OpenOffice
>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>> ## Debian Developer
>> ## PGP encryption welcome
>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>
Re: New EPM Maintainer... me!
Posted by Jim Jagielski <ji...@jaguNET.com>.
FWIW, I'm also working on my latest release of DMAKE as well: 4.13.0
https://github.com/jimjag/dmake
> On Nov 24, 2020, at 6:30 AM, Mechtilde <oo...@mechtilde.de> wrote:
>
> Hello
>
> Am 23.11.20 um 21:19 schrieb Matthias Seidel:
>> Sorry, I forgot to update the URL:
>>
>> https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz <https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz>
>
> and I forgot to delete the old file.
>
> Now it builds well
>>
>> Forced a new build now.
>>
>> Matthias
>>
>> Am 23.11.20 um 21:01 schrieb Matthias Seidel:
>>> Hi Jim,
>>>
>>> The buildbot still fails:
>>>
>>> https://ci.apache.org/projects/openoffice/buildlogs/41x/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>
>>> Matthias
>>>
>>> Am 23.11.20 um 13:27 schrieb Jim Jagielski:
>>>> My guess is that name of the tarball isn;'t the name of the resulting directory and that is causing confusion.
>>>>
>>>> I'll try to see how to have GitHub name the tarball epm-5.0.0.tar.gz/epm-5.0.0.zip
>>>>
>>>>> On Nov 21, 2020, at 2:32 PM, Mechtilde <oo...@mechtilde.de> wrote:
>>>>>
>>>>> hello,
>>>>>
>>>>>
>>>>> Am 21.11.20 um 20:12 schrieb Matthias Seidel:
>>>>>> Hi Jim,
>>>>>>
>>>>>> The Linux buildbots do not build with EPM 5.0.0.
>>>>>>
>>>>>> See error text here:
>>>>>>
>>>>>> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>>>>
>>>>>> This is on Ubuntu 16.04(?) and
>>>>>>
>>>>>> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
>>>>> I had the same problem.
>>>>>
>>>>> then i start two times: build --all:epm
>>>>>
>>>>> and then it works. Woodoo??
>>>>>
>>>>> No, it breaks again!
>>>>>
>>>>>
>>>>> So I hope there is a better solution
>>>>>
>>>>>
>>>>> Regards
>>>>>
>>>>> Mechtilde
>>>>>> Regards,
>>>>>>
>>>>>> Matthias
>>>>>>
>>>>>> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>>>>>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>>>>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>>>>>>> I am also using your work already. :)
>>>>>>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>>>>>>
>>>>>>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>>>>>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>>>>>>
>>>>>>>> Was there a split?
>>>>>>>>
>>>>>>>> I will check and see if there are differences.
>>>>>>> Weird... the owner is: https://www.msweet.org/epm/
>>>>>>> ---------------------------------------------------------------------
>>>>>>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>>>>>>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>>>>>>
>>>>> --
>>>>> Mechtilde Stehmann
>>>>> ## Apache OpenOffice
>>>>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>>>>> ## Debian Developer
>>>>> ## PGP encryption welcome
>>>>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>>
>
> --
> Mechtilde Stehmann
> ## Apache OpenOffice
> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
> ## Debian Developer
> ## PGP encryption welcome
> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
Re: New EPM Maintainer... me!
Posted by Mechtilde <oo...@mechtilde.de>.
Hello
Am 23.11.20 um 21:19 schrieb Matthias Seidel:
> Sorry, I forgot to update the URL:
>
> https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz
and I forgot to delete the old file.
Now it builds well
>
> Forced a new build now.
>
> Matthias
>
> Am 23.11.20 um 21:01 schrieb Matthias Seidel:
>> Hi Jim,
>>
>> The buildbot still fails:
>>
>> https://ci.apache.org/projects/openoffice/buildlogs/41x/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>
>> Matthias
>>
>> Am 23.11.20 um 13:27 schrieb Jim Jagielski:
>>> My guess is that name of the tarball isn;'t the name of the resulting directory and that is causing confusion.
>>>
>>> I'll try to see how to have GitHub name the tarball epm-5.0.0.tar.gz/epm-5.0.0.zip
>>>
>>>> On Nov 21, 2020, at 2:32 PM, Mechtilde <oo...@mechtilde.de> wrote:
>>>>
>>>> hello,
>>>>
>>>>
>>>> Am 21.11.20 um 20:12 schrieb Matthias Seidel:
>>>>> Hi Jim,
>>>>>
>>>>> The Linux buildbots do not build with EPM 5.0.0.
>>>>>
>>>>> See error text here:
>>>>>
>>>>> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>>>
>>>>> This is on Ubuntu 16.04(?) and
>>>>>
>>>>> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
>>>> I had the same problem.
>>>>
>>>> then i start two times: build --all:epm
>>>>
>>>> and then it works. Woodoo??
>>>>
>>>> No, it breaks again!
>>>>
>>>>
>>>> So I hope there is a better solution
>>>>
>>>>
>>>> Regards
>>>>
>>>> Mechtilde
>>>>> Regards,
>>>>>
>>>>> Matthias
>>>>>
>>>>> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>>>>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>>>>>
>>>>>>>
>>>>>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>>>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>>>>>> I am also using your work already. :)
>>>>>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>>>>>
>>>>>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>>>>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>>>>>
>>>>>>> Was there a split?
>>>>>>>
>>>>>>> I will check and see if there are differences.
>>>>>> Weird... the owner is: https://www.msweet.org/epm/
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>>>>>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>>>>>
>>>> --
>>>> Mechtilde Stehmann
>>>> ## Apache OpenOffice
>>>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>>>> ## Debian Developer
>>>> ## PGP encryption welcome
>>>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>
--
Mechtilde Stehmann
## Apache OpenOffice
## Freie Office Suite für Linux, MacOSX, Windows und OS/2
## Debian Developer
## PGP encryption welcome
## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
Re: New EPM Maintainer... me!
Posted by Matthias Seidel <ma...@hamburg.de>.
Sorry, I forgot to update the URL:
https://github.com/jimjag/epm/archive/v5.0.0/epm-5.0.0.tar.gz
Forced a new build now.
Matthias
Am 23.11.20 um 21:01 schrieb Matthias Seidel:
> Hi Jim,
>
> The buildbot still fails:
>
> https://ci.apache.org/projects/openoffice/buildlogs/41x/main/epm/unxlngx6.pro/misc/logs/epm.txt
>
> Matthias
>
> Am 23.11.20 um 13:27 schrieb Jim Jagielski:
>> My guess is that name of the tarball isn;'t the name of the resulting directory and that is causing confusion.
>>
>> I'll try to see how to have GitHub name the tarball epm-5.0.0.tar.gz/epm-5.0.0.zip
>>
>>> On Nov 21, 2020, at 2:32 PM, Mechtilde <oo...@mechtilde.de> wrote:
>>>
>>> hello,
>>>
>>>
>>> Am 21.11.20 um 20:12 schrieb Matthias Seidel:
>>>> Hi Jim,
>>>>
>>>> The Linux buildbots do not build with EPM 5.0.0.
>>>>
>>>> See error text here:
>>>>
>>>> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>>
>>>> This is on Ubuntu 16.04(?) and
>>>>
>>>> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
>>> I had the same problem.
>>>
>>> then i start two times: build --all:epm
>>>
>>> and then it works. Woodoo??
>>>
>>> No, it breaks again!
>>>
>>>
>>> So I hope there is a better solution
>>>
>>>
>>> Regards
>>>
>>> Mechtilde
>>>> Regards,
>>>>
>>>> Matthias
>>>>
>>>> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>>>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>>>>
>>>>>>
>>>>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>>>>> I am also using your work already. :)
>>>>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>>>>
>>>>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>>>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>>>>
>>>>>> Was there a split?
>>>>>>
>>>>>> I will check and see if there are differences.
>>>>> Weird... the owner is: https://www.msweet.org/epm/
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>>>>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>>>>
>>> --
>>> Mechtilde Stehmann
>>> ## Apache OpenOffice
>>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>>> ## Debian Developer
>>> ## PGP encryption welcome
>>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
Re: New EPM Maintainer... me!
Posted by Matthias Seidel <ma...@hamburg.de>.
Hi Jim,
The buildbot still fails:
https://ci.apache.org/projects/openoffice/buildlogs/41x/main/epm/unxlngx6.pro/misc/logs/epm.txt
Matthias
Am 23.11.20 um 13:27 schrieb Jim Jagielski:
> My guess is that name of the tarball isn;'t the name of the resulting directory and that is causing confusion.
>
> I'll try to see how to have GitHub name the tarball epm-5.0.0.tar.gz/epm-5.0.0.zip
>
>> On Nov 21, 2020, at 2:32 PM, Mechtilde <oo...@mechtilde.de> wrote:
>>
>> hello,
>>
>>
>> Am 21.11.20 um 20:12 schrieb Matthias Seidel:
>>> Hi Jim,
>>>
>>> The Linux buildbots do not build with EPM 5.0.0.
>>>
>>> See error text here:
>>>
>>> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>
>>> This is on Ubuntu 16.04(?) and
>>>
>>> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
>> I had the same problem.
>>
>> then i start two times: build --all:epm
>>
>> and then it works. Woodoo??
>>
>> No, it breaks again!
>>
>>
>> So I hope there is a better solution
>>
>>
>> Regards
>>
>> Mechtilde
>>> Regards,
>>>
>>> Matthias
>>>
>>> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>>>
>>>>>
>>>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>>>> I am also using your work already. :)
>>>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>>>
>>>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>>>
>>>>> Was there a split?
>>>>>
>>>>> I will check and see if there are differences.
>>>> Weird... the owner is: https://www.msweet.org/epm/
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>>>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>>>
>> --
>> Mechtilde Stehmann
>> ## Apache OpenOffice
>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>> ## Debian Developer
>> ## PGP encryption welcome
>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>
Re: New EPM Maintainer... me!
Posted by Mechtilde <oo...@mechtilde.de>.
Hello Jim
Am 23.11.20 um 13:27 schrieb Jim Jagielski:
> My guess is that name of the tarball isn;'t the name of the resulting directory and that is causing confusion.
>
> I'll try to see how to have GitHub name the tarball epm-5.0.0.tar.gz/epm-5.0.0.zip
In general it is right.
The error message is: *-epm-5.0.0.unpack can't be found by dmake
The downloaded file name is *.-v5.0.0
The asterix stands for the git hash
I hope this information helps.
Kind regards
Mechtilde
>
>> On Nov 21, 2020, at 2:32 PM, Mechtilde <oo...@mechtilde.de> wrote:
>>
>> hello,
>>
>>
>> Am 21.11.20 um 20:12 schrieb Matthias Seidel:
>>> Hi Jim,
>>>
>>> The Linux buildbots do not build with EPM 5.0.0.
>>>
>>> See error text here:
>>>
>>> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>>
>>> This is on Ubuntu 16.04(?) and
>>>
>>> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
>>
>> I had the same problem.
>>
>> then i start two times: build --all:epm
>>
>> and then it works. Woodoo??
>>
>> No, it breaks again!
>>
>>
>> So I hope there is a better solution
>>
>>
>> Regards
>>
>> Mechtilde
>>>
>>> Regards,
>>>
>>> Matthias
>>>
>>> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>>>
>>>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>>>
>>>>>
>>>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>>>> I am also using your work already. :)
>>>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>>>
>>>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>>>
>>>>> Was there a split?
>>>>>
>>>>> I will check and see if there are differences.
>>>>
>>>> Weird... the owner is: https://www.msweet.org/epm/
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>>>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>>>
>>>
>>
>> --
>> Mechtilde Stehmann
>> ## Apache OpenOffice
>> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
>> ## Debian Developer
>> ## PGP encryption welcome
>> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
>
>
--
Mechtilde Stehmann
## Apache OpenOffice
## Freie Office Suite für Linux, MacOSX, Windows und OS/2
## Debian Developer
## PGP encryption welcome
## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
Re: New EPM Maintainer... me!
Posted by Jim Jagielski <ji...@jaguNET.com>.
My guess is that name of the tarball isn;'t the name of the resulting directory and that is causing confusion.
I'll try to see how to have GitHub name the tarball epm-5.0.0.tar.gz/epm-5.0.0.zip
> On Nov 21, 2020, at 2:32 PM, Mechtilde <oo...@mechtilde.de> wrote:
>
> hello,
>
>
> Am 21.11.20 um 20:12 schrieb Matthias Seidel:
>> Hi Jim,
>>
>> The Linux buildbots do not build with EPM 5.0.0.
>>
>> See error text here:
>>
>> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>>
>> This is on Ubuntu 16.04(?) and
>>
>> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
>
> I had the same problem.
>
> then i start two times: build --all:epm
>
> and then it works. Woodoo??
>
> No, it breaks again!
>
>
> So I hope there is a better solution
>
>
> Regards
>
> Mechtilde
>>
>> Regards,
>>
>> Matthias
>>
>> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>>
>>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>>
>>>>
>>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>>> I am also using your work already. :)
>>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>>
>>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>>
>>>> Was there a split?
>>>>
>>>> I will check and see if there are differences.
>>>
>>> Weird... the owner is: https://www.msweet.org/epm/
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>>
>>
>
> --
> Mechtilde Stehmann
> ## Apache OpenOffice
> ## Freie Office Suite für Linux, MacOSX, Windows und OS/2
> ## Debian Developer
> ## PGP encryption welcome
> ## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
Re: New EPM Maintainer... me!
Posted by Mechtilde <oo...@mechtilde.de>.
hello,
Am 21.11.20 um 20:12 schrieb Matthias Seidel:
> Hi Jim,
>
> The Linux buildbots do not build with EPM 5.0.0.
>
> See error text here:
>
> https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
>
> This is on Ubuntu 16.04(?) and
>
> --with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
I had the same problem.
then i start two times: build --all:epm
and then it works. Woodoo??
No, it breaks again!
So I hope there is a better solution
Regards
Mechtilde
>
> Regards,
>
> Matthias
>
> Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>>
>>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>>
>>>
>>> On 20.11.20 16:54, Jim Jagielski wrote:
>>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>>> I am also using your work already. :)
>>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>>
>>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>>
>>> Was there a split?
>>>
>>> I will check and see if there are differences.
>>
>> Weird... the owner is: https://www.msweet.org/epm/
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
>> For additional commands, e-mail: dev-help@openoffice.apache.org
>>
>
--
Mechtilde Stehmann
## Apache OpenOffice
## Freie Office Suite für Linux, MacOSX, Windows und OS/2
## Debian Developer
## PGP encryption welcome
## F0E3 7F3D C87A 4998 2899 39E7 F287 7BBA 141A AD7F
Re: New EPM Maintainer... me!
Posted by Matthias Seidel <ma...@hamburg.de>.
Hi Jim,
The Linux buildbots do not build with EPM 5.0.0.
See error text here:
https://ci.apache.org/projects/openoffice/buildlogs/linux64/main/epm/unxlngx6.pro/misc/logs/epm.txt
This is on Ubuntu 16.04(?) and
--with-epm-url="https://github.com/jimjag/epm/archive/v5.0.0.tar.gz"
Regards,
Matthias
Am 21.11.20 um 14:31 schrieb Jim Jagielski:
>
>> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>>
>>
>> On 20.11.20 16:54, Jim Jagielski wrote:
>>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
>> I am also using your work already. :)
>>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>>
>>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>>
>> Was there a split?
>>
>> I will check and see if there are differences.
>
> Weird... the owner is: https://www.msweet.org/epm/
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
> For additional commands, e-mail: dev-help@openoffice.apache.org
>
Re: New EPM Maintainer... me!
Posted by Pedro Lino <pe...@mailbox.org.INVALID>.
Hi Peter
> On 11/21/2020 5:18 PM Peter Kovacs <pe...@apache.org> wrote:
> I think epm that the distros ship is maintained by some asian volunteers
> on epmhome.org. (i do not understand a thing.
No, the page is not related to the package.
The page is about Collagen
https://translate.google.com/translate?hl=en&sl=auto&tl=de&u=http://www.epmhome.org/
The link to the current EPM source is
https://github.com/jimjag/epm/archive/v5.0.0.tar.gz
Regards,
Pedro
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
For additional commands, e-mail: dev-help@openoffice.apache.org
Re: New EPM Maintainer... me!
Posted by Peter Kovacs <pe...@apache.org>.
On 21.11.20 15:50, Arrigo Marchiori wrote:
> Hello,
>
> I wanted to build trunk and I found out that the requirement for the
> new EPM is already in place.
>
> So:
>
> 1- thank you for taking care of this!
>
> 2- could you please tell us what is the correct value for the
> "--with-epm-url" parameter to the configure script?
>
> The Wiki page about building OpenOffice still contains the URL to EPM
> 3.7.
What I did was to checkout the epm 5.0.0 from github [1]
Follow the instruction to build epm use the prefix option to define a
convenient bin folder. I did build it in a build folder, next to the
checkout and then provide the path to --with_epm_url="path/to/bin"
>
> Side note: the same page should mention package "libXt-devel" because
> it is required for building AOO418, at least on openSUSE. I'd be happy
> to fix it myself, but I do not have an account and cannot sign up.
I think epm that the distros ship is maintained by some asian volunteers
on epmhome.org. (i do not understand a thing. However this code seems to
need libXt package. The packed from jim has ftkl as only (optional?)
dependency.
does not make things easier if we enforce 5.0.0. ;)
[1] git clone git@github.com:jimjag/epm.git
||
Re: New EPM Maintainer... me!
Posted by Arrigo Marchiori <ar...@yahoo.it.INVALID>.
Hello,
I wanted to build trunk and I found out that the requirement for the
new EPM is already in place.
So:
1- thank you for taking care of this!
2- could you please tell us what is the correct value for the
"--with-epm-url" parameter to the configure script?
The Wiki page about building OpenOffice still contains the URL to EPM
3.7.
Side note: the same page should mention package "libXt-devel" because
it is required for building AOO418, at least on openSUSE. I'd be happy
to fix it myself, but I do not have an account and cannot sign up.
Regards,
--
rigo
http://rigo.altervista.org
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
For additional commands, e-mail: dev-help@openoffice.apache.org
Re: New EPM Maintainer... me!
Posted by Jim Jagielski <ji...@jaguNET.com>.
> On Nov 21, 2020, at 3:46 AM, Peter Kovacs <pe...@Apache.org> wrote:
>
>
> On 20.11.20 16:54, Jim Jagielski wrote:
>> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
> I am also using your work already. :)
>>
>>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>>
>>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>>> We now have canon versions of dmake and EPM available via my GitHub account.
>
> strangely enough Arch and ubuntu are listing http://www.epmhome.org <http://www.epmhome.org> as upstream site.
>
> Was there a split?
>
> I will check and see if there are differences.
Weird... the owner is: https://www.msweet.org/epm/
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
For additional commands, e-mail: dev-help@openoffice.apache.org
Re: New EPM Maintainer... me!
Posted by Peter Kovacs <pe...@apache.org>.
On 20.11.20 16:54, Jim Jagielski wrote:
> With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
I am also using your work already. :)
>
>> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>>
>> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>>> We now have canon versions of dmake and EPM available via my GitHub account.
strangely enough Arch and ubuntu are listing http://www.epmhome.org
<http://www.epmhome.org> as upstream site.
Was there a split?
I will check and see if there are differences.
Re: New EPM Maintainer... me!
Posted by Jim Jagielski <ji...@jaguNET.com>.
With this in mind, I will be adjusting AOO trunk and AOO42X to require this newer version. Once I release EPM v5.0.0, I will make those changes.
> On Nov 19, 2020, at 7:06 PM, Marcus <ma...@wtnet.de> wrote:
>
> Am 19.11.20 um 17:49 schrieb Jim Jagielski:
>> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>> We now have canon versions of dmake and EPM available via my GitHub account.
>
> that's great news. Thanks for taking over this effort. :-)
>
> Marcus
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
> For additional commands, e-mail: dev-help@openoffice.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
For additional commands, e-mail: dev-help@openoffice.apache.org
Re: New EPM Maintainer... me!
Posted by Marcus <ma...@wtnet.de>.
Am 19.11.20 um 17:49 schrieb Jim Jagielski:
> AOO is pretty heavily dependent on EPM to create our community builds for Linux and macOS. Unfortunately, EPM has been, heretofore, only in maintenance mode. I contacted Michael R Sweet, the creator, and offered to "take over" development and maintenance, and he graciously agreed!
>
> We now have canon versions of dmake and EPM available via my GitHub account.
that's great news. Thanks for taking over this effort. :-)
Marcus
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@openoffice.apache.org
For additional commands, e-mail: dev-help@openoffice.apache.org