You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@oodt.apache.org by "Mallder, Valerie" <Va...@jhuapl.edu> on 2015/09/10 18:50:30 UTC
can't build radix in oodt-0.10-rc2
Just FYI, I was taking Chris' advice and trying to deploy the radix achetype tomcat and the components for OPSUI so that I could run it with my non-radix-deployed OODT pipeline. But, it is unable to resolve references to released 0.10 jar files. Which makes sense. But, is kind of a pain because I really need to use it. Does anyone know how I can get around this? I do have 0.10-rc2 installed with all of the 0.10 jar files that it needs. So how do I tell it to use the ones I already have rather than look for the external released versions which aren't released yet?
Thanks,
Val
Valerie A. Mallder
New Horizons Deputy Mission System Engineer
The Johns Hopkins University/Applied Physics Laboratory
11100 Johns Hopkins Rd (MS 23-282), Laurel, MD 20723
240-228-7846 (Office) 410-504-2233 (Blackberry)
Re: can't build radix in oodt-0.10-rc2
Posted by "Mattmann, Chris A (3980)" <ch...@jpl.nasa.gov>.
Val did you run mvn install from the top level directory
Sent from my iPhone
> On Sep 10, 2015, at 4:57 PM, Mallder, Valerie <Va...@jhuapl.edu> wrote:
>
> Just FYI, I was taking Chris' advice and trying to deploy the radix achetype tomcat and the components for OPSUI so that I could run it with my non-radix-deployed OODT pipeline. But, it is unable to resolve references to released 0.10 jar files. Which makes sense. But, is kind of a pain because I really need to use it. Does anyone know how I can get around this? I do have 0.10-rc2 installed with all of the 0.10 jar files that it needs. So how do I tell it to use the ones I already have rather than look for the external released versions which aren't released yet?
>
> Thanks,
> Val
>
>
> Valerie A. Mallder
>
> New Horizons Deputy Mission System Engineer
> The Johns Hopkins University/Applied Physics Laboratory
> 11100 Johns Hopkins Rd (MS 23-282), Laurel, MD 20723
> 240-228-7846 (Office) 410-504-2233 (Blackberry)
>
RE: can't build radix in oodt-0.10-rc2
Posted by "Mallder, Valerie" <Va...@jhuapl.edu>.
Good thinking Chris. I thought I had done that, but just checked my .m2 repository and don't see it. :( I shall do that now. :)
Valerie A. Mallder
New Horizons Deputy Mission System Engineer
Johns Hopkins University/Applied Physics Laboratory
> -----Original Message-----
> From: Mattmann, Chris A (3980) [mailto:chris.a.mattmann@jpl.nasa.gov]
> Sent: Thursday, September 10, 2015 1:02 PM
> To: dev@oodt.apache.org
> Subject: Re: can't build radix in oodt-0.10-rc2
>
> Better idea :)
>
> Just mvn install from source first Val. This will install 0.10 locally and you won’t
> need to do -SNAPSHOT. It will work fine (radix that is) after that.
>
> Cheers,
> Chris
>
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> +++++
> Chris Mattmann, Ph.D.
> Chief Architect
> Instrument Software and Science Data Systems Section (398) NASA Jet
> Propulsion Laboratory Pasadena, CA 91109 USA
> Office: 168-519, Mailstop: 168-527
> Email: chris.a.mattmann@nasa.gov
> WWW: http://sunset.usc.edu/~mattmann/
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> +++++
> Adjunct Associate Professor, Computer Science Department University of
> Southern California, Los Angeles, CA 90089 USA
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> +++++
>
>
>
>
>
> -----Original Message-----
> From: Lewis John Mcgibbney <le...@gmail.com>
> Reply-To: "dev@oodt.apache.org" <de...@oodt.apache.org>
> Date: Thursday, September 10, 2015 at 10:00 AM
> To: "dev@oodt.apache.org" <de...@oodt.apache.org>
> Subject: Re: can't build radix in oodt-0.10-rc2
>
> >Hi Valerie,
> >Can you please try changing the following line
> >https://github.com/apache/oodt/blob/trunk/mvn/archetypes/radix/src/main
> >/re
> >sources/bin/radix#L18
> >to
> >
> >-Doodt=0.10-SNAPSHOT -DgroupId=com.mycompany \
> >
> >Lets see if that works?
> >Lewis
> >
> >On Thu, Sep 10, 2015 at 9:50 AM, Mallder, Valerie <
> >Valerie.Mallder@jhuapl.edu> wrote:
> >
> >> Just FYI, I was taking Chris' advice and trying to deploy the radix
> >>achetype tomcat and the components for OPSUI so that I could run it
> >>with my non-radix-deployed OODT pipeline. But, it is unable to
> >>resolve references to released 0.10 jar files. Which makes sense.
> >>But, is kind of a pain because I really need to use it. Does anyone
> >>know how I can get around this? I do have 0.10-rc2 installed with
> >>all of the 0.10 jar files that it needs. So how do I tell it to use
> >>the ones I already have rather than look for the external released
> >>versions which aren't released yet?
> >>
> >> Thanks,
> >> Val
> >>
> >>
> >> Valerie A. Mallder
> >>
> >> New Horizons Deputy Mission System Engineer The Johns Hopkins
> >> University/Applied Physics Laboratory
> >> 11100 Johns Hopkins Rd (MS 23-282), Laurel, MD 20723
> >> 240-228-7846 (Office) 410-504-2233 (Blackberry)
> >>
> >>
> >
> >
> >--
> >*Lewis*
Re: can't build radix in oodt-0.10-rc2
Posted by "Mattmann, Chris A (3980)" <ch...@jpl.nasa.gov>.
Better idea :)
Just mvn install from source first Val. This will install 0.10 locally
and you won’t need to do -SNAPSHOT. It will work fine (radix that is)
after that.
Cheers,
Chris
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Chris Mattmann, Ph.D.
Chief Architect
Instrument Software and Science Data Systems Section (398)
NASA Jet Propulsion Laboratory Pasadena, CA 91109 USA
Office: 168-519, Mailstop: 168-527
Email: chris.a.mattmann@nasa.gov
WWW: http://sunset.usc.edu/~mattmann/
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Adjunct Associate Professor, Computer Science Department
University of Southern California, Los Angeles, CA 90089 USA
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-----Original Message-----
From: Lewis John Mcgibbney <le...@gmail.com>
Reply-To: "dev@oodt.apache.org" <de...@oodt.apache.org>
Date: Thursday, September 10, 2015 at 10:00 AM
To: "dev@oodt.apache.org" <de...@oodt.apache.org>
Subject: Re: can't build radix in oodt-0.10-rc2
>Hi Valerie,
>Can you please try changing the following line
>https://github.com/apache/oodt/blob/trunk/mvn/archetypes/radix/src/main/re
>sources/bin/radix#L18
>to
>
>-Doodt=0.10-SNAPSHOT -DgroupId=com.mycompany \
>
>Lets see if that works?
>Lewis
>
>On Thu, Sep 10, 2015 at 9:50 AM, Mallder, Valerie <
>Valerie.Mallder@jhuapl.edu> wrote:
>
>> Just FYI, I was taking Chris' advice and trying to deploy the radix
>> achetype tomcat and the components for OPSUI so that I could run it
>>with my
>> non-radix-deployed OODT pipeline. But, it is unable to resolve
>>references
>> to released 0.10 jar files. Which makes sense. But, is kind of a pain
>> because I really need to use it. Does anyone know how I can get around
>> this? I do have 0.10-rc2 installed with all of the 0.10 jar files that
>>it
>> needs. So how do I tell it to use the ones I already have rather than
>>look
>> for the external released versions which aren't released yet?
>>
>> Thanks,
>> Val
>>
>>
>> Valerie A. Mallder
>>
>> New Horizons Deputy Mission System Engineer
>> The Johns Hopkins University/Applied Physics Laboratory
>> 11100 Johns Hopkins Rd (MS 23-282), Laurel, MD 20723
>> 240-228-7846 (Office) 410-504-2233 (Blackberry)
>>
>>
>
>
>--
>*Lewis*
RE: can't build radix in oodt-0.10-rc2
Posted by "Mallder, Valerie" <Va...@jhuapl.edu>.
Thank you Lewis, that worked :)
Valerie A. Mallder
New Horizons Deputy Mission System Engineer
Johns Hopkins University/Applied Physics Laboratory
> -----Original Message-----
> From: Lewis John Mcgibbney [mailto:lewis.mcgibbney@gmail.com]
> Sent: Thursday, September 10, 2015 1:01 PM
> To: dev@oodt.apache.org
> Subject: Re: can't build radix in oodt-0.10-rc2
>
> Hi Valerie,
> Can you please try changing the following line
> https://github.com/apache/oodt/blob/trunk/mvn/archetypes/radix/src/main/resource
> s/bin/radix#L18
> to
>
> -Doodt=0.10-SNAPSHOT -DgroupId=com.mycompany \
>
> Lets see if that works?
> Lewis
>
> On Thu, Sep 10, 2015 at 9:50 AM, Mallder, Valerie < Valerie.Mallder@jhuapl.edu>
> wrote:
>
> > Just FYI, I was taking Chris' advice and trying to deploy the radix
> > achetype tomcat and the components for OPSUI so that I could run it
> > with my non-radix-deployed OODT pipeline. But, it is unable to resolve
> > references to released 0.10 jar files. Which makes sense. But, is
> > kind of a pain because I really need to use it. Does anyone know how
> > I can get around this? I do have 0.10-rc2 installed with all of the
> > 0.10 jar files that it needs. So how do I tell it to use the ones I
> > already have rather than look for the external released versions which aren't
> released yet?
> >
> > Thanks,
> > Val
> >
> >
> > Valerie A. Mallder
> >
> > New Horizons Deputy Mission System Engineer The Johns Hopkins
> > University/Applied Physics Laboratory
> > 11100 Johns Hopkins Rd (MS 23-282), Laurel, MD 20723
> > 240-228-7846 (Office) 410-504-2233 (Blackberry)
> >
> >
>
>
> --
> *Lewis*
Re: can't build radix in oodt-0.10-rc2
Posted by Lewis John Mcgibbney <le...@gmail.com>.
Hi Valerie,
Can you please try changing the following line
https://github.com/apache/oodt/blob/trunk/mvn/archetypes/radix/src/main/resources/bin/radix#L18
to
-Doodt=0.10-SNAPSHOT -DgroupId=com.mycompany \
Lets see if that works?
Lewis
On Thu, Sep 10, 2015 at 9:50 AM, Mallder, Valerie <
Valerie.Mallder@jhuapl.edu> wrote:
> Just FYI, I was taking Chris' advice and trying to deploy the radix
> achetype tomcat and the components for OPSUI so that I could run it with my
> non-radix-deployed OODT pipeline. But, it is unable to resolve references
> to released 0.10 jar files. Which makes sense. But, is kind of a pain
> because I really need to use it. Does anyone know how I can get around
> this? I do have 0.10-rc2 installed with all of the 0.10 jar files that it
> needs. So how do I tell it to use the ones I already have rather than look
> for the external released versions which aren't released yet?
>
> Thanks,
> Val
>
>
> Valerie A. Mallder
>
> New Horizons Deputy Mission System Engineer
> The Johns Hopkins University/Applied Physics Laboratory
> 11100 Johns Hopkins Rd (MS 23-282), Laurel, MD 20723
> 240-228-7846 (Office) 410-504-2233 (Blackberry)
>
>
--
*Lewis*