You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@ignite.apache.org by sb...@apache.org on 2016/09/15 06:40:16 UTC
[18/40] ignite git commit: IGNITE-3172 Refactoring Ignite-Cassandra
serializers. - Fixes #956.
http://git-wip-us.apache.org/repos/asf/ignite/blob/231ead01/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-env.sh
----------------------------------------------------------------------
diff --git a/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-env.sh b/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-env.sh
new file mode 100644
index 0000000..ba76401
--- /dev/null
+++ b/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-env.sh
@@ -0,0 +1,287 @@
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# -----------------------------------------------------------------------------------------------
+# Environment setup script from Cassandra distribution
+# -----------------------------------------------------------------------------------------------
+
+calculate_heap_sizes()
+{
+ case "`uname`" in
+ Linux)
+ system_memory_in_mb=`free -m | awk '/:/ {print $2;exit}'`
+ system_cpu_cores=`egrep -c 'processor([[:space:]]+):.*' /proc/cpuinfo`
+ ;;
+ FreeBSD)
+ system_memory_in_bytes=`sysctl hw.physmem | awk '{print $2}'`
+ system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
+ system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
+ ;;
+ SunOS)
+ system_memory_in_mb=`prtconf | awk '/Memory size:/ {print $3}'`
+ system_cpu_cores=`psrinfo | wc -l`
+ ;;
+ Darwin)
+ system_memory_in_bytes=`sysctl hw.memsize | awk '{print $2}'`
+ system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
+ system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
+ ;;
+ *)
+ # assume reasonable defaults for e.g. a modern desktop or
+ # cheap server
+ system_memory_in_mb="2048"
+ system_cpu_cores="2"
+ ;;
+ esac
+
+ # some systems like the raspberry pi don't report cores, use at least 1
+ if [ "$system_cpu_cores" -lt "1" ]
+ then
+ system_cpu_cores="1"
+ fi
+
+ # set max heap size based on the following
+ # max(min(1/2 ram, 1024MB), min(1/4 ram, 8GB))
+ # calculate 1/2 ram and cap to 1024MB
+ # calculate 1/4 ram and cap to 8192MB
+ # pick the max
+ half_system_memory_in_mb=`expr $system_memory_in_mb / 2`
+ quarter_system_memory_in_mb=`expr $half_system_memory_in_mb / 2`
+ if [ "$half_system_memory_in_mb" -gt "1024" ]
+ then
+ half_system_memory_in_mb="1024"
+ fi
+ if [ "$quarter_system_memory_in_mb" -gt "8192" ]
+ then
+ quarter_system_memory_in_mb="8192"
+ fi
+ if [ "$half_system_memory_in_mb" -gt "$quarter_system_memory_in_mb" ]
+ then
+ max_heap_size_in_mb="$half_system_memory_in_mb"
+ else
+ max_heap_size_in_mb="$quarter_system_memory_in_mb"
+ fi
+ MAX_HEAP_SIZE="${max_heap_size_in_mb}M"
+
+ # Young gen: min(max_sensible_per_modern_cpu_core * num_cores, 1/4 * heap size)
+ max_sensible_yg_per_core_in_mb="100"
+ max_sensible_yg_in_mb=`expr $max_sensible_yg_per_core_in_mb "*" $system_cpu_cores`
+
+ desired_yg_in_mb=`expr $max_heap_size_in_mb / 4`
+
+ if [ "$desired_yg_in_mb" -gt "$max_sensible_yg_in_mb" ]
+ then
+ HEAP_NEWSIZE="${max_sensible_yg_in_mb}M"
+ else
+ HEAP_NEWSIZE="${desired_yg_in_mb}M"
+ fi
+}
+
+# Determine the sort of JVM we'll be running on.
+java_ver_output=`"${JAVA:-java}" -version 2>&1`
+jvmver=`echo "$java_ver_output" | grep '[openjdk|java] version' | awk -F'"' 'NR==1 {print $2}'`
+JVM_VERSION=${jvmver%_*}
+JVM_PATCH_VERSION=${jvmver#*_}
+
+if [ "$JVM_VERSION" \< "1.8" ] ; then
+ echo "Cassandra 3.0 and later require Java 8u40 or later."
+ exit 1;
+fi
+
+if [ "$JVM_VERSION" \< "1.8" ] && [ "$JVM_PATCH_VERSION" \< "40" ] ; then
+ echo "Cassandra 3.0 and later require Java 8u40 or later."
+ exit 1;
+fi
+
+jvm=`echo "$java_ver_output" | grep -A 1 'java version' | awk 'NR==2 {print $1}'`
+case "$jvm" in
+ OpenJDK)
+ JVM_VENDOR=OpenJDK
+ # this will be "64-Bit" or "32-Bit"
+ JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $2}'`
+ ;;
+ "Java(TM)")
+ JVM_VENDOR=Oracle
+ # this will be "64-Bit" or "32-Bit"
+ JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $3}'`
+ ;;
+ *)
+ # Help fill in other JVM values
+ JVM_VENDOR=other
+ JVM_ARCH=unknown
+ ;;
+esac
+
+# Override these to set the amount of memory to allocate to the JVM at
+# start-up. For production use you may wish to adjust this for your
+# environment. MAX_HEAP_SIZE is the total amount of memory dedicated
+# to the Java heap. HEAP_NEWSIZE refers to the size of the young
+# generation. Both MAX_HEAP_SIZE and HEAP_NEWSIZE should be either set
+# or not (if you set one, set the other).
+#
+# The main trade-off for the young generation is that the larger it
+# is, the longer GC pause times will be. The shorter it is, the more
+# expensive GC will be (usually).
+#
+# The example HEAP_NEWSIZE assumes a modern 8-core+ machine for decent pause
+# times. If in doubt, and if you do not particularly want to tweak, go with
+# 100 MB per physical CPU core.
+
+#MAX_HEAP_SIZE="4G"
+#HEAP_NEWSIZE="800M"
+
+# Set this to control the amount of arenas per-thread in glibc
+#export MALLOC_ARENA_MAX=4
+
+# only calculate the size if it's not set manually
+if [ "x$MAX_HEAP_SIZE" = "x" ] && [ "x$HEAP_NEWSIZE" = "x" ]; then
+ calculate_heap_sizes
+else
+ if [ "x$MAX_HEAP_SIZE" = "x" ] || [ "x$HEAP_NEWSIZE" = "x" ]; then
+ echo "please set or unset MAX_HEAP_SIZE and HEAP_NEWSIZE in pairs (see cassandra-env.sh)"
+ exit 1
+ fi
+fi
+
+if [ "x$MALLOC_ARENA_MAX" = "x" ] ; then
+ export MALLOC_ARENA_MAX=4
+fi
+
+#GC log path has to be defined here because it needs to access CASSANDRA_HOME
+JVM_OPTS="$JVM_OPTS -Xloggc:${CASSANDRA_HOME}/logs/gc.log"
+
+# Here we create the arguments that will get passed to the jvm when
+# starting cassandra.
+
+# Read user-defined JVM options from jvm.options file
+JVM_OPTS_FILE=$CASSANDRA_CONF/jvm.options
+for opt in `grep "^-" $JVM_OPTS_FILE`
+do
+ JVM_OPTS="$JVM_OPTS $opt"
+done
+
+# Check what parameters were defined on jvm.options file to avoid conflicts
+echo $JVM_OPTS | grep -q Xmn
+DEFINED_XMN=$?
+echo $JVM_OPTS | grep -q Xmx
+DEFINED_XMX=$?
+echo $JVM_OPTS | grep -q Xms
+DEFINED_XMS=$?
+echo $JVM_OPTS | grep -q UseConcMarkSweepGC
+USING_CMS=$?
+
+# We only set -Xms and -Xmx if they were not defined on jvm.options file
+# If defined, both Xmx and Xms should be defined together.
+if [ $DEFINED_XMX -ne 0 ] && [ $DEFINED_XMS -ne 0 ]; then
+ JVM_OPTS="$JVM_OPTS -Xms${MAX_HEAP_SIZE}"
+ JVM_OPTS="$JVM_OPTS -Xmx${MAX_HEAP_SIZE}"
+elif [ $DEFINED_XMX -ne 0 ] || [ $DEFINED_XMS -ne 0 ]; then
+ echo "Please set or unset -Xmx and -Xms flags in pairs on jvm.options file."
+ exit 1
+fi
+
+# We only set -Xmn flag if it was not defined in jvm.options file
+# and if the CMS GC is being used
+# If defined, both Xmn and Xmx should be defined together.
+if [ $DEFINED_XMN -eq 0 ] && [ $DEFINED_XMX -ne 0 ]; then
+ echo "Please set or unset -Xmx and -Xmn flags in pairs on jvm.options file."
+ exit 1
+elif [ $DEFINED_XMN -ne 0 ] && [ $USING_CMS -eq 0 ]; then
+ JVM_OPTS="$JVM_OPTS -Xmn${HEAP_NEWSIZE}"
+fi
+
+if [ "$JVM_ARCH" = "64-Bit" ] && [ $USING_CMS -eq 0 ]; then
+ JVM_OPTS="$JVM_OPTS -XX:+UseCondCardMark"
+fi
+
+# provides hints to the JIT compiler
+JVM_OPTS="$JVM_OPTS -XX:CompileCommandFile=$CASSANDRA_CONF/hotspot_compiler"
+
+# add the jamm javaagent
+JVM_OPTS="$JVM_OPTS -javaagent:$CASSANDRA_HOME/lib/jamm-0.3.0.jar"
+
+# set jvm HeapDumpPath with CASSANDRA_HEAPDUMP_DIR
+if [ "x$CASSANDRA_HEAPDUMP_DIR" != "x" ]; then
+ JVM_OPTS="$JVM_OPTS -XX:HeapDumpPath=$CASSANDRA_HEAPDUMP_DIR/cassandra-`date +%s`-pid$$.hprof"
+fi
+
+# jmx: metrics and administration interface
+#
+# add this if you're having trouble connecting:
+# JVM_OPTS="$JVM_OPTS -Djava.rmi.server.hostname=<public name>"
+#
+# see
+# https://blogs.oracle.com/jmxetc/entry/troubleshooting_connection_problems_in_jconsole
+# for more on configuring JMX through firewalls, etc. (Short version:
+# get it working with no firewall first.)
+#
+# Cassandra ships with JMX accessible *only* from localhost.
+# To enable remote JMX connections, uncomment lines below
+# with authentication and/or ssl enabled. See https://wiki.apache.org/cassandra/JmxSecurity
+#
+if [ "x$LOCAL_JMX" = "x" ]; then
+ LOCAL_JMX=yes
+fi
+
+# Specifies the default port over which Cassandra will be available for
+# JMX connections.
+# For security reasons, you should not expose this port to the internet. Firewall it if needed.
+JMX_PORT="7199"
+
+if [ "$LOCAL_JMX" = "yes" ]; then
+# JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.local.port=$JMX_PORT -XX:+DisableExplicitGC"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.port=$JMX_PORT"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.rmi.port=$JMX_PORT"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.local.only=false"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.authenticate=false"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl=false"
+ JVM_OPTS="$JVM_OPTS -XX:+UnlockCommercialFeatures"
+ JVM_OPTS="$JVM_OPTS -XX:+FlightRecorder"
+ JVM_OPTS="$JVM_OPTS -XX:FlightRecorderOptions=defaultrecording=true"
+else
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.port=$JMX_PORT"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.rmi.port=$JMX_PORT"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl=false"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.authenticate=true"
+ JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.password.file=/etc/cassandra/jmxremote.password"
+# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStore=/path/to/keystore"
+# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStorePassword=<keystore-password>"
+# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStore=/path/to/truststore"
+# JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStorePassword=<truststore-password>"
+# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.need.client.auth=true"
+# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.registry.ssl=true"
+# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.protocols=<enabled-protocols>"
+# JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.cipher.suites=<enabled-cipher-suites>"
+fi
+
+# To use mx4j, an HTML interface for JMX, add mx4j-tools.jar to the lib/
+# directory.
+# See http://wiki.apache.org/cassandra/Operations#Monitoring_with_MX4J
+# By default mx4j listens on 0.0.0.0:8081. Uncomment the following lines
+# to control its listen address and port.
+#MX4J_ADDRESS="-Dmx4jaddress=127.0.0.1"
+#MX4J_PORT="-Dmx4jport=8081"
+
+# Cassandra uses SIGAR to capture OS metrics CASSANDRA-7838
+# for SIGAR we have to set the java.library.path
+# to the location of the native libraries.
+JVM_OPTS="$JVM_OPTS -Djava.library.path=$CASSANDRA_HOME/lib/sigar-bin"
+
+JVM_OPTS="$JVM_OPTS $MX4J_ADDRESS"
+JVM_OPTS="$JVM_OPTS $MX4J_PORT"
+JVM_OPTS="$JVM_OPTS $JVM_EXTRA_OPTS"
http://git-wip-us.apache.org/repos/asf/ignite/blob/231ead01/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-start.sh
----------------------------------------------------------------------
diff --git a/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-start.sh b/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-start.sh
new file mode 100644
index 0000000..4a6daef
--- /dev/null
+++ b/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-start.sh
@@ -0,0 +1,217 @@
+#!/bin/sh
+
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# -----------------------------------------------------------------------------------------------
+# Script to start Cassandra daemon (used by cassandra-bootstrap.sh)
+# -----------------------------------------------------------------------------------------------
+
+#profile=/home/cassandra/.bash_profile
+profile=/root/.bash_profile
+
+. $profile
+. /opt/ignite-cassandra-tests/bootstrap/aws/common.sh "cassandra"
+
+# Setups Cassandra seeds for this EC2 node. Looks for the information in S3 about
+# already up and running Cassandra cluster nodes
+setupCassandraSeeds()
+{
+ if [ "$FIRST_NODE_LOCK" == "true" ]; then
+ echo "[INFO] Setting up Cassandra seeds"
+
+ CLUSTER_SEEDS=$(hostname -f | tr '[:upper:]' '[:lower:]')
+
+ echo "[INFO] Using host address as a seed for the first Cassandra node: $CLUSTER_SEEDS"
+
+ aws s3 rm --recursive ${S3_CASSANDRA_NODES_DISCOVERY::-1}
+ if [ $? -ne 0 ]; then
+ terminate "Failed to clean Cassandra node discovery URL: $S3_CASSANDRA_NODES_DISCOVERY"
+ fi
+ else
+ setupClusterSeeds "cassandra" "true"
+ CLUSTER_SEEDS=$(echo $CLUSTER_SEEDS | sed -r "s/ /,/g")
+ fi
+
+ cat /opt/cassandra/conf/cassandra-template.yaml | sed -r "s/\\\$\{CASSANDRA_SEEDS\}/$CLUSTER_SEEDS/g" > /opt/cassandra/conf/cassandra.yaml
+}
+
+# Gracefully starts Cassandra daemon and waits until it joins Cassandra cluster
+startCassandra()
+{
+ echo "[INFO]-------------------------------------------------------------"
+ echo "[INFO] Trying attempt $START_ATTEMPT to start Cassandra daemon"
+ echo "[INFO]-------------------------------------------------------------"
+ echo ""
+
+ setupCassandraSeeds
+
+ waitToJoinCluster
+
+ if [ "$FIRST_NODE_LOCK" == "true" ]; then
+ aws s3 rm --recursive ${S3_CASSANDRA_NODES_DISCOVERY::-1}
+ if [ $? -ne 0 ]; then
+ terminate "Failed to clean Cassandra node discovery URL: $S3_IGNITE_NODES_DISCOVERY"
+ fi
+ fi
+
+ proc=$(ps -ef | grep java | grep "org.apache.cassandra.service.CassandraDaemon")
+ proc=($proc)
+
+ if [ -n "${proc[1]}" ]; then
+ echo "[INFO] Terminating existing Cassandra process ${proc[1]}"
+ kill -9 ${proc[1]}
+ fi
+
+ echo "[INFO] Starting Cassandra"
+ rm -Rf /opt/cassandra/logs/* /storage/cassandra/*
+ /opt/cassandra/bin/cassandra -R &
+
+ echo "[INFO] Cassandra job id: $!"
+
+ sleep 1m
+
+ START_ATTEMPT=$(( $START_ATTEMPT+1 ))
+}
+
+#######################################################################################################
+
+START_ATTEMPT=0
+
+# Cleans all the previous metadata about this EC2 node
+unregisterNode
+
+# Tries to get first-node lock
+tryToGetFirstNodeLock
+
+echo "[INFO]-----------------------------------------------------------------"
+
+if [ "$FIRST_NODE_LOCK" == "true" ]; then
+ echo "[INFO] Starting first Cassandra node"
+else
+ echo "[INFO] Starting Cassandra node"
+fi
+
+echo "[INFO]-----------------------------------------------------------------"
+printInstanceInfo
+echo "[INFO]-----------------------------------------------------------------"
+
+if [ "$FIRST_NODE_LOCK" != "true" ]; then
+ waitFirstClusterNodeRegistered "true"
+else
+ cleanupMetadata
+fi
+
+# Start Cassandra daemon
+startCassandra
+
+startTime=$(date +%s)
+
+# Trying multiple attempts to start Cassandra daemon
+while true; do
+ proc=$(ps -ef | grep java | grep "org.apache.cassandra.service.CassandraDaemon")
+
+ /opt/cassandra/bin/nodetool status &> /dev/null
+
+ if [ $? -eq 0 ]; then
+ echo "[INFO]-----------------------------------------------------"
+ echo "[INFO] Cassandra daemon successfully started"
+ echo "[INFO]-----------------------------------------------------"
+ echo $proc
+ echo "[INFO]-----------------------------------------------------"
+
+ # Once node joined the cluster we need to remove cluster-join lock
+ # to allow other EC2 nodes to acquire it and join cluster sequentially
+ removeClusterJoinLock
+
+ break
+ fi
+
+ currentTime=$(date +%s)
+ duration=$(( $currentTime-$startTime ))
+ duration=$(( $duration/60 ))
+
+ if [ $duration -gt $SERVICE_STARTUP_TIME ]; then
+ if [ "$FIRST_NODE_LOCK" == "true" ]; then
+ # If the first node of Cassandra cluster failed to start Cassandra daemon in SERVICE_STARTUP_TIME min,
+ # we will not try any other attempts and just terminate with error. Terminate function itself, will
+ # take care about removing all the locks holding by this node.
+ terminate "${SERVICE_STARTUP_TIME}min timeout expired, but first Cassandra daemon is still not up and running"
+ else
+ # If node isn't the first node of Cassandra cluster and it failed to start we need to
+ # remove cluster-join lock to allow other EC2 nodes to acquire it
+ removeClusterJoinLock
+
+ # If node failed all SERVICE_START_ATTEMPTS attempts to start Cassandra daemon we will not
+ # try anymore and terminate with error
+ if [ $START_ATTEMPT -gt $SERVICE_START_ATTEMPTS ]; then
+ terminate "${SERVICE_START_ATTEMPTS} attempts exceed, but Cassandra daemon is still not up and running"
+ fi
+
+ # New attempt to start Cassandra daemon
+ startCassandra
+ fi
+
+ continue
+ fi
+
+ # Checking for the situation when two nodes trying to simultaneously join Cassandra cluster.
+ # This actually can happen only in not standard situation, when you are trying to start
+ # Cassandra daemon on some EC2 nodes manually and not using bootstrap script.
+ concurrencyError=$(cat /opt/cassandra/logs/system.log | grep "java.lang.UnsupportedOperationException: Other bootstrapping/leaving/moving nodes detected, cannot bootstrap while cassandra.consistent.rangemovement is true")
+
+ if [ -n "$concurrencyError" ] && [ "$FIRST_NODE_LOCK" != "true" ]; then
+ # Remove cluster-join lock to allow other EC2 nodes to acquire it
+ removeClusterJoinLock
+
+ echo "[WARN] Failed to concurrently start Cassandra daemon. Sleeping for extra 30sec"
+ sleep 30s
+
+ # New attempt to start Cassandra daemon
+ startCassandra
+
+ continue
+ fi
+
+ # Handling situation when Cassandra daemon process abnormally terminated
+ if [ -z "$proc" ]; then
+ # If this is the first node of Cassandra cluster just terminating with error
+ if [ "$FIRST_NODE_LOCK" == "true" ]; then
+ terminate "Failed to start Cassandra daemon"
+ fi
+
+ # Remove cluster-join lock to allow other EC2 nodes to acquire it
+ removeClusterJoinLock
+
+ echo "[WARN] Failed to start Cassandra daemon. Sleeping for extra 30sec"
+ sleep 30s
+
+ # New attempt to start Cassandra daemon
+ startCassandra
+
+ continue
+ fi
+
+ echo "[INFO] Waiting for Cassandra daemon to start, time passed ${duration}min"
+ sleep 30s
+done
+
+# Once Cassandra daemon successfully started we registering new Cassandra node in S3
+registerNode
+
+# Terminating script with zero exit code
+terminate
\ No newline at end of file
http://git-wip-us.apache.org/repos/asf/ignite/blob/231ead01/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-template.yaml
----------------------------------------------------------------------
diff --git a/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-template.yaml b/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-template.yaml
new file mode 100644
index 0000000..e621886
--- /dev/null
+++ b/modules/cassandra/store/src/test/bootstrap/aws/cassandra/cassandra-template.yaml
@@ -0,0 +1,888 @@
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Cassandra storage config YAML
+
+# NOTE:
+# See http://wiki.apache.org/cassandra/StorageConfiguration for
+# full explanations of configuration directives
+# /NOTE
+
+# The name of the cluster. This is mainly used to prevent machines in
+# one logical cluster from joining another.
+cluster_name: 'CassandraIgnite'
+
+# It makes new (non-seed) nodes automatically migrate the right data to themselves.
+# When initializing a fresh cluster with no data, add auto_bootstrap: false
+auto_bootstrap: false
+
+# This defines the number of tokens randomly assigned to this node on the ring
+# The more tokens, relative to other nodes, the larger the proportion of data
+# that this node will store. You probably want all nodes to have the same number
+# of tokens assuming they have equal hardware capability.
+#
+# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
+# and will use the initial_token as described below.
+#
+# Specifying initial_token will override this setting on the node's initial start,
+# on subsequent starts, this setting will apply even if initial token is set.
+#
+# If you already have a cluster with 1 token per node, and wish to migrate to
+# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
+num_tokens: 256
+
+# initial_token allows you to specify tokens manually. While you can use # it with
+# vnodes (num_tokens > 1, above) -- in which case you should provide a
+# comma-separated list -- it's primarily used when adding nodes # to legacy clusters
+# that do not have vnodes enabled.
+# initial_token:
+
+# See http://wiki.apache.org/cassandra/HintedHandoff
+# May either be "true" or "false" to enable globally, or contain a list
+# of data centers to enable per-datacenter.
+# hinted_handoff_enabled: DC1,DC2
+hinted_handoff_enabled: true
+# this defines the maximum amount of time a dead host will have hints
+# generated. After it has been dead this long, new hints for it will not be
+# created until it has been seen alive and gone down again.
+max_hint_window_in_ms: 10800000 # 3 hours
+# Maximum throttle in KBs per second, per delivery thread. This will be
+# reduced proportionally to the number of nodes in the cluster. (If there
+# are two nodes in the cluster, each delivery thread will use the maximum
+# rate; if there are three, each will throttle to half of the maximum,
+# since we expect two nodes to be delivering hints simultaneously.)
+hinted_handoff_throttle_in_kb: 1024
+# Number of threads with which to deliver hints;
+# Consider increasing this number when you have multi-dc deployments, since
+# cross-dc handoff tends to be slower
+max_hints_delivery_threads: 2
+
+# Maximum throttle in KBs per second, total. This will be
+# reduced proportionally to the number of nodes in the cluster.
+batchlog_replay_throttle_in_kb: 1024
+
+# Authentication backend, implementing IAuthenticator; used to identify users
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator,
+# PasswordAuthenticator}.
+#
+# - AllowAllAuthenticator performs no checks - set it to disable authentication.
+# - PasswordAuthenticator relies on username/password pairs to authenticate
+# users. It keeps usernames and hashed passwords in system_auth.credentials table.
+# Please increase system_auth keyspace replication factor if you use this authenticator.
+# If using PasswordAuthenticator, CassandraRoleManager must also be used (see below)
+#authenticator: PasswordAuthenticator
+authenticator: AllowAllAuthenticator
+
+# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer,
+# CassandraAuthorizer}.
+#
+# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
+# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please
+# increase system_auth keyspace replication factor if you use this authorizer.
+#authorizer: CassandraAuthorizer
+authorizer: AllowAllAuthorizer
+
+# Part of the Authentication & Authorization backend, implementing IRoleManager; used
+# to maintain grants and memberships between roles.
+# Out of the box, Cassandra provides org.apache.cassandra.auth.CassandraRoleManager,
+# which stores role information in the system_auth keyspace. Most functions of the
+# IRoleManager require an authenticated login, so unless the configured IAuthenticator
+# actually implements authentication, most of this functionality will be unavailable.
+#
+# - CassandraRoleManager stores role data in the system_auth keyspace. Please
+# increase system_auth keyspace replication factor if you use this role manager.
+role_manager: CassandraRoleManager
+
+# Validity period for roles cache (fetching permissions can be an
+# expensive operation depending on the authorizer). Granted roles are cached for
+# authenticated sessions in AuthenticatedUser and after the period specified
+# here, become eligible for (async) reload.
+# Defaults to 2000, set to 0 to disable.
+# Will be disabled automatically for AllowAllAuthenticator.
+roles_validity_in_ms: 2000
+
+# Refresh interval for roles cache (if enabled).
+# After this interval, cache entries become eligible for refresh. Upon next
+# access, an async reload is scheduled and the old value returned until it
+# completes. If roles_validity_in_ms is non-zero, then this must be
+# also.
+# Defaults to the same value as roles_validity_in_ms.
+# roles_update_interval_in_ms: 1000
+
+# Validity period for permissions cache (fetching permissions can be an
+# expensive operation depending on the authorizer, CassandraAuthorizer is
+# one example). Defaults to 2000, set to 0 to disable.
+# Will be disabled automatically for AllowAllAuthorizer.
+permissions_validity_in_ms: 2000
+
+# Refresh interval for permissions cache (if enabled).
+# After this interval, cache entries become eligible for refresh. Upon next
+# access, an async reload is scheduled and the old value returned until it
+# completes. If permissions_validity_in_ms is non-zero, then this must be
+# also.
+# Defaults to the same value as permissions_validity_in_ms.
+# permissions_update_interval_in_ms: 1000
+
+# The partitioner is responsible for distributing groups of rows (by
+# partition key) across nodes in the cluster. You should leave this
+# alone for new clusters. The partitioner can NOT be changed without
+# reloading all data, so when upgrading you should set this to the
+# same partitioner you were already using.
+#
+# Besides Murmur3Partitioner, partitioners included for backwards
+# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
+# OrderPreservingPartitioner.
+#
+partitioner: org.apache.cassandra.dht.Murmur3Partitioner
+
+# Directories where Cassandra should store data on disk. Cassandra
+# will spread data evenly across them, subject to the granularity of
+# the configured compaction strategy.
+# If not set, the default directory is $CASSANDRA_HOME/data/data.
+data_file_directories: ${CASSANDRA_DATA_DIR}
+
+# commit log. when running on magnetic HDD, this should be a
+# separate spindle than the data directories.
+# If not set, the default directory is $CASSANDRA_HOME/data/commitlog.
+commitlog_directory: ${CASSANDRA_COMMITLOG_DIR}
+
+# policy for data disk failures:
+# die: shut down gossip and client transports and kill the JVM for any fs errors or
+# single-sstable errors, so the node can be replaced.
+# stop_paranoid: shut down gossip and client transports even for single-sstable errors,
+# kill the JVM for errors during startup.
+# stop: shut down gossip and client transports, leaving the node effectively dead, but
+# can still be inspected via JMX, kill the JVM for errors during startup.
+# best_effort: stop using the failed disk and respond to requests based on
+# remaining available sstables. This means you WILL see obsolete
+# data at CL.ONE!
+# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
+disk_failure_policy: stop
+
+# policy for commit disk failures:
+# die: shut down gossip and Thrift and kill the JVM, so the node can be replaced.
+# stop: shut down gossip and Thrift, leaving the node effectively dead, but
+# can still be inspected via JMX.
+# stop_commit: shutdown the commit log, letting writes collect but
+# continuing to service reads, as in pre-2.0.5 Cassandra
+# ignore: ignore fatal errors and let the batches fail
+commit_failure_policy: stop
+
+# Maximum size of the key cache in memory.
+#
+# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
+# minimum, sometimes more. The key cache is fairly tiny for the amount of
+# time it saves, so it's worthwhile to use it at large numbers.
+# The row cache saves even more time, but must contain the entire row,
+# so it is extremely space-intensive. It's best to only use the
+# row cache if you have hot rows or static rows.
+#
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
+key_cache_size_in_mb:
+
+# Duration in seconds after which Cassandra should
+# save the key cache. Caches are saved to saved_caches_directory as
+# specified in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 14400 or 4 hours.
+key_cache_save_period: 14400
+
+# Number of keys from the key cache to save
+# Disabled by default, meaning all keys are going to be saved
+# key_cache_keys_to_save: 100
+
+# Row cache implementation class name.
+# Available implementations:
+# org.apache.cassandra.cache.OHCProvider Fully off-heap row cache implementation (default).
+# org.apache.cassandra.cache.SerializingCacheProvider This is the row cache implementation availabile
+# in previous releases of Cassandra.
+# row_cache_class_name: org.apache.cassandra.cache.OHCProvider
+
+# Maximum size of the row cache in memory.
+# Please note that OHC cache implementation requires some additional off-heap memory to manage
+# the map structures and some in-flight memory during operations before/after cache entries can be
+# accounted against the cache capacity. This overhead is usually small compared to the whole capacity.
+# Do not specify more memory that the system can afford in the worst usual situation and leave some
+# headroom for OS block level cache. Do never allow your system to swap.
+#
+# Default value is 0, to disable row caching.
+row_cache_size_in_mb: 0
+
+# Duration in seconds after which Cassandra should save the row cache.
+# Caches are saved to saved_caches_directory as specified in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 0 to disable saving the row cache.
+row_cache_save_period: 0
+
+# Number of keys from the row cache to save.
+# Specify 0 (which is the default), meaning all keys are going to be saved
+# row_cache_keys_to_save: 100
+
+# Maximum size of the counter cache in memory.
+#
+# Counter cache helps to reduce counter locks' contention for hot counter cells.
+# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before
+# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration
+# of the lock hold, helping with hot counter cell updates, but will not allow skipping
+# the read entirely. Only the local (clock, count) tuple of a counter cell is kept
+# in memory, not the whole counter, so it's relatively cheap.
+#
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache.
+# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache.
+counter_cache_size_in_mb:
+
+# Duration in seconds after which Cassandra should
+# save the counter cache (keys only). Caches are saved to saved_caches_directory as
+# specified in this configuration file.
+#
+# Default is 7200 or 2 hours.
+counter_cache_save_period: 7200
+
+# Number of keys from the counter cache to save
+# Disabled by default, meaning all keys are going to be saved
+# counter_cache_keys_to_save: 100
+
+# The off-heap memory allocator. Affects storage engine metadata as
+# well as caches. Experiments show that JEMAlloc saves some memory
+# than the native GCC allocator (i.e., JEMalloc is more
+# fragmentation-resistant).
+#
+# Supported values are: NativeAllocator, JEMallocAllocator
+#
+# If you intend to use JEMallocAllocator you have to install JEMalloc as library and
+# modify cassandra-env.sh as directed in the file.
+#
+# Defaults to NativeAllocator
+# memory_allocator: NativeAllocator
+
+# saved caches
+# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches.
+saved_caches_directory: ${CASSANDRA_CACHES_DIR}
+
+# commitlog_sync may be either "periodic" or "batch."
+#
+# When in batch mode, Cassandra won't ack writes until the commit log
+# has been fsynced to disk. It will wait
+# commitlog_sync_batch_window_in_ms milliseconds between fsyncs.
+# This window should be kept short because the writer threads will
+# be unable to do extra work while waiting. (You may need to increase
+# concurrent_writes for the same reason.)
+#
+# commitlog_sync: batch
+# commitlog_sync_batch_window_in_ms: 2
+#
+# the other option is "periodic" where writes may be acked immediately
+# and the CommitLog is simply synced every commitlog_sync_period_in_ms
+# milliseconds.
+commitlog_sync: periodic
+commitlog_sync_period_in_ms: 10000
+
+# The size of the individual commitlog file segments. A commitlog
+# segment may be archived, deleted, or recycled once all the data
+# in it (potentially from each columnfamily in the system) has been
+# flushed to sstables.
+#
+# The default size is 32, which is almost always fine, but if you are
+# archiving commitlog segments (see commitlog_archiving.properties),
+# then you probably want a finer granularity of archiving; 8 or 16 MB
+# is reasonable.
+commitlog_segment_size_in_mb: 32
+
+# Compression to apply to the commit log. If omitted, the commit log
+# will be written uncompressed. LZ4, Snappy, and Deflate compressors
+# are supported.
+#commitlog_compression:
+# - class_name: LZ4Compressor
+# parameters:
+# -
+
+# any class that implements the SeedProvider interface and has a
+# constructor that takes a Map<String, String> of parameters will do.
+seed_provider:
+ # Addresses of hosts that are deemed contact points.
+ # Cassandra nodes use this list of hosts to find each other and learn
+ # the topology of the ring. You must change this if you are running
+ # multiple nodes!
+ - class_name: org.apache.cassandra.locator.SimpleSeedProvider
+ parameters:
+ # seeds is actually a comma-delimited list of addresses.
+ # Ex: "<ip1>,<ip2>,<ip3>"
+ - seeds: "${CASSANDRA_SEEDS}"
+
+# For workloads with more data than can fit in memory, Cassandra's
+# bottleneck will be reads that need to fetch data from
+# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
+# order to allow the operations to enqueue low enough in the stack
+# that the OS and drives can reorder them. Same applies to
+# "concurrent_counter_writes", since counter writes read the current
+# values before incrementing and writing them back.
+#
+# On the other hand, since writes are almost never IO bound, the ideal
+# number of "concurrent_writes" is dependent on the number of cores in
+# your system; (8 * number_of_cores) is a good rule of thumb.
+concurrent_reads: 32
+concurrent_writes: 32
+concurrent_counter_writes: 32
+
+# Total memory to use for sstable-reading buffers. Defaults to
+# the smaller of 1/4 of heap or 512MB.
+# file_cache_size_in_mb: 512
+
+# Total permitted memory to use for memtables. Cassandra will stop
+# accepting writes when the limit is exceeded until a flush completes,
+# and will trigger a flush based on memtable_cleanup_threshold
+# If omitted, Cassandra will set both to 1/4 the size of the heap.
+# memtable_heap_space_in_mb: 2048
+# memtable_offheap_space_in_mb: 2048
+
+# Ratio of occupied non-flushing memtable size to total permitted size
+# that will trigger a flush of the largest memtable. Lager mct will
+# mean larger flushes and hence less compaction, but also less concurrent
+# flush activity which can make it difficult to keep your disks fed
+# under heavy write load.
+#
+# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1)
+# memtable_cleanup_threshold: 0.11
+
+# Specify the way Cassandra allocates and manages memtable memory.
+# Options are:
+# heap_buffers: on heap nio buffers
+# offheap_buffers: off heap (direct) nio buffers
+# offheap_objects: native memory, eliminating nio buffer heap overhead
+memtable_allocation_type: heap_buffers
+
+# Total space to use for commit logs on disk.
+#
+# If space gets above this value, Cassandra will flush every dirty CF
+# in the oldest segment and remove it. So a small total commitlog space
+# will tend to cause more flush activity on less-active columnfamilies.
+#
+# The default value is 8192.
+# commitlog_total_space_in_mb: 8192
+
+# This sets the amount of memtable flush writer threads. These will
+# be blocked by disk io, and each one will hold a memtable in memory
+# while blocked.
+#
+# memtable_flush_writers defaults to the smaller of (number of disks,
+# number of cores), with a minimum of 2 and a maximum of 8.
+#
+# If your data directories are backed by SSD, you should increase this
+# to the number of cores.
+#memtable_flush_writers: 8
+
+# A fixed memory pool size in MB for for SSTable index summaries. If left
+# empty, this will default to 5% of the heap size. If the memory usage of
+# all index summaries exceeds this limit, SSTables with low read rates will
+# shrink their index summaries in order to meet this limit. However, this
+# is a best-effort process. In extreme conditions Cassandra may need to use
+# more than this amount of memory.
+index_summary_capacity_in_mb:
+
+# How frequently index summaries should be resampled. This is done
+# periodically to redistribute memory from the fixed-size pool to sstables
+# proportional their recent read rates. Setting to -1 will disable this
+# process, leaving existing index summaries at their current sampling level.
+index_summary_resize_interval_in_minutes: 60
+
+# Whether to, when doing sequential writing, fsync() at intervals in
+# order to force the operating system to flush the dirty
+# buffers. Enable this to avoid sudden dirty buffer flushing from
+# impacting read latencies. Almost always a good idea on SSDs; not
+# necessarily on platters.
+trickle_fsync: false
+trickle_fsync_interval_in_kb: 10240
+
+# TCP port, for commands and data
+# For security reasons, you should not expose this port to the internet. Firewall it if needed.
+storage_port: 7000
+
+# SSL port, for encrypted communication. Unused unless enabled in
+# encryption_options
+# For security reasons, you should not expose this port to the internet. Firewall it if needed.
+ssl_storage_port: 7001
+
+# Address or interface to bind to and tell other Cassandra nodes to connect to.
+# You _must_ change this if you want multiple nodes to be able to communicate!
+#
+# Set listen_address OR listen_interface, not both. Interfaces must correspond
+# to a single address, IP aliasing is not supported.
+#
+# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
+# will always do the Right Thing _if_ the node is properly configured
+# (hostname, name resolution, etc), and the Right Thing is to use the
+# address associated with the hostname (it might not be).
+#
+# Setting listen_address to 0.0.0.0 is always wrong.
+#
+# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
+# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4
+# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
+# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
+listen_address:
+# listen_interface: eth0
+# listen_interface_prefer_ipv6: false
+
+# Address to broadcast to other Cassandra nodes
+# Leaving this blank will set it to the same value as listen_address
+# broadcast_address: 1.2.3.4
+
+# Internode authentication backend, implementing IInternodeAuthenticator;
+# used to allow/disallow connections from peer nodes.
+# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
+
+# Whether to start the native transport server.
+# Please note that the address on which the native transport is bound is the
+# same as the rpc_address. The port however is different and specified below.
+start_native_transport: true
+# port for the CQL native transport to listen for clients on
+# For security reasons, you should not expose this port to the internet. Firewall it if needed.
+native_transport_port: 9042
+# The maximum threads for handling requests when the native transport is used.
+# This is similar to rpc_max_threads though the default differs slightly (and
+# there is no native_transport_min_threads, idle threads will always be stopped
+# after 30 seconds).
+# native_transport_max_threads: 128
+#
+# The maximum size of allowed frame. Frame (requests) larger than this will
+# be rejected as invalid. The default is 256MB.
+# native_transport_max_frame_size_in_mb: 256
+
+# The maximum number of concurrent client connections.
+# The default is -1, which means unlimited.
+# native_transport_max_concurrent_connections: -1
+
+# The maximum number of concurrent client connections per source ip.
+# The default is -1, which means unlimited.
+# native_transport_max_concurrent_connections_per_ip: -1
+
+# Whether to start the thrift rpc server.
+start_rpc: true
+
+# The address or interface to bind the Thrift RPC service and native transport
+# server to.
+#
+# Set rpc_address OR rpc_interface, not both. Interfaces must correspond
+# to a single address, IP aliasing is not supported.
+#
+# Leaving rpc_address blank has the same effect as on listen_address
+# (i.e. it will be based on the configured hostname of the node).
+#
+# Note that unlike listen_address, you can specify 0.0.0.0, but you must also
+# set broadcast_rpc_address to a value other than 0.0.0.0.
+#
+# For security reasons, you should not expose this port to the internet. Firewall it if needed.
+#
+# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
+# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4
+# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
+# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
+rpc_address:
+# rpc_interface: eth1
+# rpc_interface_prefer_ipv6: false
+
+# port for Thrift to listen for clients on
+rpc_port: 9160
+
+# RPC address to broadcast to drivers and other Cassandra nodes. This cannot
+# be set to 0.0.0.0. If left blank, this will be set to the value of
+# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must
+# be set.
+broadcast_rpc_address:
+
+# enable or disable keepalive on rpc/native connections
+rpc_keepalive: true
+
+# Cassandra provides two out-of-the-box options for the RPC Server:
+#
+# sync -> One thread per thrift connection. For a very large number of clients, memory
+# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
+# per thread, and that will correspond to your use of virtual memory (but physical memory
+# may be limited depending on use of stack space).
+#
+# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled
+# asynchronously using a small number of threads that does not vary with the amount
+# of thrift clients (and thus scales well to many clients). The rpc requests are still
+# synchronous (one thread per active request). If hsha is selected then it is essential
+# that rpc_max_threads is changed from the default value of unlimited.
+#
+# The default is sync because on Windows hsha is about 30% slower. On Linux,
+# sync/hsha performance is about the same, with hsha of course using less memory.
+#
+# Alternatively, can provide your own RPC server by providing the fully-qualified class name
+# of an o.a.c.t.TServerFactory that can create an instance of it.
+rpc_server_type: sync
+
+# Uncomment rpc_min|max_thread to set request pool size limits.
+#
+# Regardless of your choice of RPC server (see above), the number of maximum requests in the
+# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
+# RPC server, it also dictates the number of clients that can be connected at all).
+#
+# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
+# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
+# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
+#
+# rpc_min_threads: 16
+# rpc_max_threads: 2048
+
+# uncomment to set socket buffer sizes on rpc connections
+# rpc_send_buff_size_in_bytes:
+# rpc_recv_buff_size_in_bytes:
+
+# Uncomment to set socket buffer size for internode communication
+# Note that when setting this, the buffer size is limited by net.core.wmem_max
+# and when not setting it it is defined by net.ipv4.tcp_wmem
+# See:
+# /proc/sys/net/core/wmem_max
+# /proc/sys/net/core/rmem_max
+# /proc/sys/net/ipv4/tcp_wmem
+# /proc/sys/net/ipv4/tcp_wmem
+# and: man tcp
+# internode_send_buff_size_in_bytes:
+# internode_recv_buff_size_in_bytes:
+
+# Frame size for thrift (maximum message length).
+thrift_framed_transport_size_in_mb: 15
+
+# Set to true to have Cassandra create a hard link to each sstable
+# flushed or streamed locally in a backups/ subdirectory of the
+# keyspace data. Removing these links is the operator's
+# responsibility.
+incremental_backups: false
+
+# Whether or not to take a snapshot before each compaction. Be
+# careful using this option, since Cassandra won't clean up the
+# snapshots for you. Mostly useful if you're paranoid when there
+# is a data format change.
+snapshot_before_compaction: false
+
+# Whether or not a snapshot is taken of the data before keyspace truncation
+# or dropping of column families. The STRONGLY advised default of true
+# should be used to provide data safety. If you set this flag to false, you will
+# lose data on truncation or drop.
+auto_snapshot: true
+
+# When executing a scan, within or across a partition, we need to keep the
+# tombstones seen in memory so we can return them to the coordinator, which
+# will use them to make sure other replicas also know about the deleted rows.
+# With workloads that generate a lot of tombstones, this can cause performance
+# problems and even exaust the server heap.
+# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
+# Adjust the thresholds here if you understand the dangers and want to
+# scan more tombstones anyway. These thresholds may also be adjusted at runtime
+# using the StorageService mbean.
+tombstone_warn_threshold: 1000
+tombstone_failure_threshold: 100000
+
+# Granularity of the collation index of rows within a partition.
+# Increase if your rows are large, or if you have a very large
+# number of rows per partition. The competing goals are these:
+# 1) a smaller granularity means more index entries are generated
+# and looking up rows withing the partition by collation column
+# is faster
+# 2) but, Cassandra will keep the collation index in memory for hot
+# rows (as part of the key cache), so a larger granularity means
+# you can cache more hot rows
+column_index_size_in_kb: 64
+
+
+# Log WARN on any batch size exceeding this value. 5kb per batch by default.
+# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
+batch_size_warn_threshold_in_kb: 5
+
+# Fail any batch exceeding this value. 50kb (10x warn threshold) by default.
+batch_size_fail_threshold_in_kb: 50
+
+# Number of simultaneous compactions to allow, NOT including
+# validation "compactions" for anti-entropy repair. Simultaneous
+# compactions can help preserve read performance in a mixed read/write
+# workload, by mitigating the tendency of small sstables to accumulate
+# during a single long running compactions. The default is usually
+# fine and if you experience problems with compaction running too
+# slowly or too fast, you should look at
+# compaction_throughput_mb_per_sec first.
+#
+# concurrent_compactors defaults to the smaller of (number of disks,
+# number of cores), with a minimum of 2 and a maximum of 8.
+#
+# If your data directories are backed by SSD, you should increase this
+# to the number of cores.
+#concurrent_compactors: 1
+
+# Throttles compaction to the given total throughput across the entire
+# system. The faster you insert data, the faster you need to compact in
+# order to keep the sstable count down, but in general, setting this to
+# 16 to 32 times the rate you are inserting data is more than sufficient.
+# Setting this to 0 disables throttling. Note that this account for all types
+# of compaction, including validation compaction.
+compaction_throughput_mb_per_sec: 16
+
+# Log a warning when compacting partitions larger than this value
+compaction_large_partition_warning_threshold_mb: 100
+
+# When compacting, the replacement sstable(s) can be opened before they
+# are completely written, and used in place of the prior sstables for
+# any range that has been written. This helps to smoothly transfer reads
+# between the sstables, reducing page cache churn and keeping hot rows hot
+sstable_preemptive_open_interval_in_mb: 50
+
+# Throttles all outbound streaming file transfers on this node to the
+# given total throughput in Mbps. This is necessary because Cassandra does
+# mostly sequential IO when streaming data during bootstrap or repair, which
+# can lead to saturating the network connection and degrading rpc performance.
+# When unset, the default is 200 Mbps or 25 MB/s.
+# stream_throughput_outbound_megabits_per_sec: 200
+
+# Throttles all streaming file transfer between the datacenters,
+# this setting allows users to throttle inter dc stream throughput in addition
+# to throttling all network stream traffic as configured with
+# stream_throughput_outbound_megabits_per_sec
+# inter_dc_stream_throughput_outbound_megabits_per_sec:
+
+# How long the coordinator should wait for read operations to complete
+read_request_timeout_in_ms: 50000
+# How long the coordinator should wait for seq or index scans to complete
+range_request_timeout_in_ms: 10000
+# How long the coordinator should wait for writes to complete
+write_request_timeout_in_ms: 20000
+# How long the coordinator should wait for counter writes to complete
+counter_write_request_timeout_in_ms: 5000
+# How long a coordinator should continue to retry a CAS operation
+# that contends with other proposals for the same row
+cas_contention_timeout_in_ms: 1000
+# How long the coordinator should wait for truncates to complete
+# (This can be much longer, because unless auto_snapshot is disabled
+# we need to flush first so we can snapshot before removing the data.)
+truncate_request_timeout_in_ms: 60000
+# The default timeout for other, miscellaneous operations
+request_timeout_in_ms: 10000
+
+# Enable operation timeout information exchange between nodes to accurately
+# measure request timeouts. If disabled, replicas will assume that requests
+# were forwarded to them instantly by the coordinator, which means that
+# under overload conditions we will waste that much extra time processing
+# already-timed-out requests.
+#
+# Warning: before enabling this property make sure to ntp is installed
+# and the times are synchronized between the nodes.
+cross_node_timeout: false
+
+# Enable socket timeout for streaming operation.
+# When a timeout occurs during streaming, streaming is retried from the start
+# of the current file. This _can_ involve re-streaming an important amount of
+# data, so you should avoid setting the value too low.
+# Default value is 3600000, which means streams timeout after an hour.
+# streaming_socket_timeout_in_ms: 3600000
+
+# phi value that must be reached for a host to be marked down.
+# most users should never need to adjust this.
+# phi_convict_threshold: 8
+
+# endpoint_snitch -- Set this to a class that implements
+# IEndpointSnitch. The snitch has two functions:
+# - it teaches Cassandra enough about your network topology to route
+# requests efficiently
+# - it allows Cassandra to spread replicas around your cluster to avoid
+# correlated failures. It does this by grouping machines into
+# "datacenters" and "racks." Cassandra will do its best not to have
+# more than one replica on the same "rack" (which may not actually
+# be a physical location)
+#
+# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER,
+# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS
+# ARE PLACED.
+#
+# Out of the box, Cassandra provides
+# - SimpleSnitch:
+# Treats Strategy order as proximity. This can improve cache
+# locality when disabling read repair. Only appropriate for
+# single-datacenter deployments.
+# - GossipingPropertyFileSnitch
+# This should be your go-to snitch for production use. The rack
+# and datacenter for the local node are defined in
+# cassandra-rackdc.properties and propagated to other nodes via
+# gossip. If cassandra-topology.properties exists, it is used as a
+# fallback, allowing migration from the PropertyFileSnitch.
+# - PropertyFileSnitch:
+# Proximity is determined by rack and data center, which are
+# explicitly configured in cassandra-topology.properties.
+# - Ec2Snitch:
+# Appropriate for EC2 deployments in a single Region. Loads Region
+# and Availability Zone information from the EC2 API. The Region is
+# treated as the datacenter, and the Availability Zone as the rack.
+# Only private IPs are used, so this will not work across multiple
+# Regions.
+# - Ec2MultiRegionSnitch:
+# Uses public IPs as broadcast_address to allow cross-region
+# connectivity. (Thus, you should set seed addresses to the public
+# IP as well.) You will need to open the storage_port or
+# ssl_storage_port on the public IP firewall. (For intra-Region
+# traffic, Cassandra will switch to the private IP after
+# establishing a connection.)
+# - RackInferringSnitch:
+# Proximity is determined by rack and data center, which are
+# assumed to correspond to the 3rd and 2nd octet of each node's IP
+# address, respectively. Unless this happens to match your
+# deployment conventions, this is best used as an example of
+# writing a custom Snitch class and is provided in that spirit.
+#
+# You can use a custom Snitch by setting this to the full class name
+# of the snitch, which will be assumed to be on your classpath.
+endpoint_snitch: Ec2Snitch
+
+# controls how often to perform the more expensive part of host score
+# calculation
+dynamic_snitch_update_interval_in_ms: 100
+# controls how often to reset all host scores, allowing a bad host to
+# possibly recover
+dynamic_snitch_reset_interval_in_ms: 600000
+# if set greater than zero and read_repair_chance is < 1.0, this will allow
+# 'pinning' of replicas to hosts in order to increase cache capacity.
+# The badness threshold will control how much worse the pinned host has to be
+# before the dynamic snitch will prefer other replicas over it. This is
+# expressed as a double which represents a percentage. Thus, a value of
+# 0.2 means Cassandra would continue to prefer the static snitch values
+# until the pinned host was 20% worse than the fastest.
+dynamic_snitch_badness_threshold: 0.1
+
+# request_scheduler -- Set this to a class that implements
+# RequestScheduler, which will schedule incoming client requests
+# according to the specific policy. This is useful for multi-tenancy
+# with a single Cassandra cluster.
+# NOTE: This is specifically for requests from the client and does
+# not affect inter node communication.
+# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
+# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
+# client requests to a node with a separate queue for each
+# request_scheduler_id. The scheduler is further customized by
+# request_scheduler_options as described below.
+request_scheduler: org.apache.cassandra.scheduler.NoScheduler
+
+# Scheduler Options vary based on the type of scheduler
+# NoScheduler - Has no options
+# RoundRobin
+# - throttle_limit -- The throttle_limit is the number of in-flight
+# requests per client. Requests beyond
+# that limit are queued up until
+# running requests can complete.
+# The value of 80 here is twice the number of
+# concurrent_reads + concurrent_writes.
+# - default_weight -- default_weight is optional and allows for
+# overriding the default which is 1.
+# - weights -- Weights are optional and will default to 1 or the
+# overridden default_weight. The weight translates into how
+# many requests are handled during each turn of the
+# RoundRobin, based on the scheduler id.
+#
+# request_scheduler_options:
+# throttle_limit: 80
+# default_weight: 5
+# weights:
+# Keyspace1: 1
+# Keyspace2: 5
+
+# request_scheduler_id -- An identifier based on which to perform
+# the request scheduling. Currently the only valid option is keyspace.
+# request_scheduler_id: keyspace
+
+# Enable or disable inter-node encryption
+# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that
+# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher
+# suite for authentication, key exchange and encryption of the actual data transfers.
+# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode.
+# NOTE: No custom encryption options are enabled at the moment
+# The available internode options are : all, none, dc, rack
+#
+# If set to dc cassandra will encrypt the traffic between the DCs
+# If set to rack cassandra will encrypt the traffic between the racks
+#
+# The passwords used in these options must match the passwords used when generating
+# the keystore and truststore. For instructions on generating these files, see:
+# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
+#
+server_encryption_options:
+ internode_encryption: none
+ keystore: conf/.keystore
+ keystore_password: cassandra
+ truststore: conf/.truststore
+ truststore_password: cassandra
+ # More advanced defaults below:
+ # protocol: TLS
+ # algorithm: SunX509
+ # store_type: JKS
+ # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
+ # require_client_auth: false
+
+# enable or disable client/server encryption.
+client_encryption_options:
+ enabled: false
+ keystore: conf/.keystore
+ keystore_password: cassandra
+ # require_client_auth: false
+ # Set trustore and truststore_password if require_client_auth is true
+ # truststore: conf/.truststore
+ # truststore_password: cassandra
+ # More advanced defaults below:
+ # protocol: TLS
+ # algorithm: SunX509
+ # store_type: JKS
+ # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
+
+# internode_compression controls whether traffic between nodes is
+# compressed.
+# can be: all - all traffic is compressed
+# dc - traffic between different datacenters is compressed
+# none - nothing is compressed.
+internode_compression: all
+
+# Enable or disable tcp_nodelay for inter-dc communication.
+# Disabling it will result in larger (but fewer) network packets being sent,
+# reducing overhead from the TCP protocol itself, at the cost of increasing
+# latency if you block for cross-datacenter responses.
+inter_dc_tcp_nodelay: false
+
+# TTL for different trace types used during logging of the repair process.
+tracetype_query_ttl: 86400
+tracetype_repair_ttl: 604800
+
+# UDFs (user defined functions) are disabled by default.
+# As of Cassandra 2.2, there is no security manager or anything else in place that
+# prevents execution of evil code. CASSANDRA-9402 will fix this issue for Cassandra 3.0.
+# This will inherently be backwards-incompatible with any 2.2 UDF that perform insecure
+# operations such as opening a socket or writing to the filesystem.
+enable_user_defined_functions: false
+
+# The default Windows kernel timer and scheduling resolution is 15.6ms for power conservation.
+# Lowering this value on Windows can provide much tighter latency and better throughput, however
+# some virtualized environments may see a negative performance impact from changing this setting
+# below their system default. The sysinternals 'clockres' tool can confirm your system's default
+# setting.
+windows_timer_interval: 1