You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@pulsar.apache.org by Zixuan Liu <no...@gmail.com> on 2024/05/08 15:26:25 UTC
[DISCUSS] Release Apache Pulsar Python Client 3.4.1
Hi all,
https://github.com/apache/pulsar-client-python/pull/174 breaks the
python-client installation in the pulsar arm image, and then the release
manager of pulsar@3.3.0 will take about 2 hours to build the grpcio wheel,
please see
https://github.com/nodece/pulsar-python-deps-build/actions/runs/8891459473/job/24418839959#step:6:315
for
details.
https://github.com/apache/pulsar-client-python/pull/211 fixes that, but I'm
not sure if a new version will be released.
Thanks,
Zixuan
Re: [DISCUSS] Release Apache Pulsar Python Client 3.4.1
Posted by Zixuan Liu <no...@gmail.com>.
Use the all to install the py3-grpcio, and then use the requirements.txt to
install the pulsar-client, it works fine.
This is a workaround.
Thanks,
Zixuan
Yunze Xu <xy...@apache.org>于2024年5月15日 周三10:51写道:
> > I tried but it didn't work.
>
> Could you share the CI workflow so I can take a look? Meanwhile, would
> you like to start the release for Python client 3.5.1?
>
> Thanks,
> Yunze
>
> On Sat, May 11, 2024 at 5:54 PM Zixuan Liu <no...@gmail.com> wrote:
> >
> > > Please release 3.5.1 rather than 3.4.1 because 3.5.0 is already
> > released. It's too heavy to maintain old releases for client libraries
> > for now.
> >
> > Let's go to 3.5.1.
> >
> > > However, it would be better to remove the `functions` component from
> > pulsar-client-python because the Python client itself never uses these
> > dependencies. See my discussion [1] before. Since python functions is
> > maintained in the Pulsar main repository, we should maintain the extra
> > dependencies in the Pulsar main repo as well.
> >
> > Good idea +1.
> >
> > > Would this release block the Pulsar 3.3.0 release?
> >
> > Yes, the current Python client will cause a particularly long time(2
> hours)
> > to build a pulsar ARM image.
> >
> > > If yes, a quicker way to fix it was to add a `requirements.txt` that
> > includes a proper
> > version of grpcio and then run `python -m pip install -r
> > python/requirements.txt`.
> >
> > I tried but it didn't work.
> >
> > Thanks,
> > Zixuan
> >
> >
> > Yunze Xu <xy...@apache.org> 于2024年5月11日周六 12:25写道:
> >
> > > Sorry I missed the discussion link:
> > > https://lists.apache.org/thread/5s2l9vgt5f973psb6xlttpmy4rpym7zh
> > >
> > > Would this release block the Pulsar 3.3.0 release? If yes, a quicker
> > > way to fix it was to add a `requirements.txt` that includes a proper
> > > version of grpcio and then run `python -m pip install -r
> > > python/requirements.txt`.
> > >
> > > Here is an example:
> > >
> > > ```
> > > pulsar-client == 3.5.0
> > > protobuf>=3.6.1,<=3.20.3
> > > grpcio >= 1.60.0
> > > apache-bookkeeper-client>=4.16.1
> > > prometheus_client
> > > ratelimit
> > > ```
> > >
> > > Thanks,
> > > Yunze
> > >
> > > On Sat, May 11, 2024 at 12:19 PM Yunze Xu <xy...@apache.org> wrote:
> > > >
> > > > Please release 3.5.1 rather than 3.4.1 because 3.5.0 is already
> > > > released. It's too heavy to maintain old releases for client
> libraries
> > > > for now.
> > > >
> > > > However, it would be better to remove the `functions` component from
> > > > pulsar-client-python because the Python client itself never uses
> these
> > > > dependencies. See my discussion [1] before. Since python functions is
> > > > maintained in the Pulsar main repository, we should maintain the
> extra
> > > > dependencies in the Pulsar main repo as well.
> > > >
> > > > Thanks,
> > > > Yunze
> > > >
> > > > On Wed, May 8, 2024 at 11:26 PM Zixuan Liu <no...@gmail.com>
> wrote:
> > > > >
> > > > > Hi all,
> > > > >
> > > > > https://github.com/apache/pulsar-client-python/pull/174 breaks the
> > > > > python-client installation in the pulsar arm image, and then the
> > > release
> > > > > manager of pulsar@3.3.0 will take about 2 hours to build the
> grpcio
> > > wheel,
> > > > > please see
> > > > >
> > >
> https://github.com/nodece/pulsar-python-deps-build/actions/runs/8891459473/job/24418839959#step:6:315
> > > > > for
> > > > > details.
> > > > >
> > > > > https://github.com/apache/pulsar-client-python/pull/211 fixes
> that,
> > > but I'm
> > > > > not sure if a new version will be released.
> > > > >
> > > > > Thanks,
> > > > > Zixuan
> > >
>
Re: [DISCUSS] Release Apache Pulsar Python Client 3.4.1
Posted by Yunze Xu <xy...@apache.org>.
> I tried but it didn't work.
Could you share the CI workflow so I can take a look? Meanwhile, would
you like to start the release for Python client 3.5.1?
Thanks,
Yunze
On Sat, May 11, 2024 at 5:54 PM Zixuan Liu <no...@gmail.com> wrote:
>
> > Please release 3.5.1 rather than 3.4.1 because 3.5.0 is already
> released. It's too heavy to maintain old releases for client libraries
> for now.
>
> Let's go to 3.5.1.
>
> > However, it would be better to remove the `functions` component from
> pulsar-client-python because the Python client itself never uses these
> dependencies. See my discussion [1] before. Since python functions is
> maintained in the Pulsar main repository, we should maintain the extra
> dependencies in the Pulsar main repo as well.
>
> Good idea +1.
>
> > Would this release block the Pulsar 3.3.0 release?
>
> Yes, the current Python client will cause a particularly long time(2 hours)
> to build a pulsar ARM image.
>
> > If yes, a quicker way to fix it was to add a `requirements.txt` that
> includes a proper
> version of grpcio and then run `python -m pip install -r
> python/requirements.txt`.
>
> I tried but it didn't work.
>
> Thanks,
> Zixuan
>
>
> Yunze Xu <xy...@apache.org> 于2024年5月11日周六 12:25写道:
>
> > Sorry I missed the discussion link:
> > https://lists.apache.org/thread/5s2l9vgt5f973psb6xlttpmy4rpym7zh
> >
> > Would this release block the Pulsar 3.3.0 release? If yes, a quicker
> > way to fix it was to add a `requirements.txt` that includes a proper
> > version of grpcio and then run `python -m pip install -r
> > python/requirements.txt`.
> >
> > Here is an example:
> >
> > ```
> > pulsar-client == 3.5.0
> > protobuf>=3.6.1,<=3.20.3
> > grpcio >= 1.60.0
> > apache-bookkeeper-client>=4.16.1
> > prometheus_client
> > ratelimit
> > ```
> >
> > Thanks,
> > Yunze
> >
> > On Sat, May 11, 2024 at 12:19 PM Yunze Xu <xy...@apache.org> wrote:
> > >
> > > Please release 3.5.1 rather than 3.4.1 because 3.5.0 is already
> > > released. It's too heavy to maintain old releases for client libraries
> > > for now.
> > >
> > > However, it would be better to remove the `functions` component from
> > > pulsar-client-python because the Python client itself never uses these
> > > dependencies. See my discussion [1] before. Since python functions is
> > > maintained in the Pulsar main repository, we should maintain the extra
> > > dependencies in the Pulsar main repo as well.
> > >
> > > Thanks,
> > > Yunze
> > >
> > > On Wed, May 8, 2024 at 11:26 PM Zixuan Liu <no...@gmail.com> wrote:
> > > >
> > > > Hi all,
> > > >
> > > > https://github.com/apache/pulsar-client-python/pull/174 breaks the
> > > > python-client installation in the pulsar arm image, and then the
> > release
> > > > manager of pulsar@3.3.0 will take about 2 hours to build the grpcio
> > wheel,
> > > > please see
> > > >
> > https://github.com/nodece/pulsar-python-deps-build/actions/runs/8891459473/job/24418839959#step:6:315
> > > > for
> > > > details.
> > > >
> > > > https://github.com/apache/pulsar-client-python/pull/211 fixes that,
> > but I'm
> > > > not sure if a new version will be released.
> > > >
> > > > Thanks,
> > > > Zixuan
> >
Re: [DISCUSS] Release Apache Pulsar Python Client 3.4.1
Posted by Zixuan Liu <no...@gmail.com>.
> Please release 3.5.1 rather than 3.4.1 because 3.5.0 is already
released. It's too heavy to maintain old releases for client libraries
for now.
Let's go to 3.5.1.
> However, it would be better to remove the `functions` component from
pulsar-client-python because the Python client itself never uses these
dependencies. See my discussion [1] before. Since python functions is
maintained in the Pulsar main repository, we should maintain the extra
dependencies in the Pulsar main repo as well.
Good idea +1.
> Would this release block the Pulsar 3.3.0 release?
Yes, the current Python client will cause a particularly long time(2 hours)
to build a pulsar ARM image.
> If yes, a quicker way to fix it was to add a `requirements.txt` that
includes a proper
version of grpcio and then run `python -m pip install -r
python/requirements.txt`.
I tried but it didn't work.
Thanks,
Zixuan
Yunze Xu <xy...@apache.org> 于2024年5月11日周六 12:25写道:
> Sorry I missed the discussion link:
> https://lists.apache.org/thread/5s2l9vgt5f973psb6xlttpmy4rpym7zh
>
> Would this release block the Pulsar 3.3.0 release? If yes, a quicker
> way to fix it was to add a `requirements.txt` that includes a proper
> version of grpcio and then run `python -m pip install -r
> python/requirements.txt`.
>
> Here is an example:
>
> ```
> pulsar-client == 3.5.0
> protobuf>=3.6.1,<=3.20.3
> grpcio >= 1.60.0
> apache-bookkeeper-client>=4.16.1
> prometheus_client
> ratelimit
> ```
>
> Thanks,
> Yunze
>
> On Sat, May 11, 2024 at 12:19 PM Yunze Xu <xy...@apache.org> wrote:
> >
> > Please release 3.5.1 rather than 3.4.1 because 3.5.0 is already
> > released. It's too heavy to maintain old releases for client libraries
> > for now.
> >
> > However, it would be better to remove the `functions` component from
> > pulsar-client-python because the Python client itself never uses these
> > dependencies. See my discussion [1] before. Since python functions is
> > maintained in the Pulsar main repository, we should maintain the extra
> > dependencies in the Pulsar main repo as well.
> >
> > Thanks,
> > Yunze
> >
> > On Wed, May 8, 2024 at 11:26 PM Zixuan Liu <no...@gmail.com> wrote:
> > >
> > > Hi all,
> > >
> > > https://github.com/apache/pulsar-client-python/pull/174 breaks the
> > > python-client installation in the pulsar arm image, and then the
> release
> > > manager of pulsar@3.3.0 will take about 2 hours to build the grpcio
> wheel,
> > > please see
> > >
> https://github.com/nodece/pulsar-python-deps-build/actions/runs/8891459473/job/24418839959#step:6:315
> > > for
> > > details.
> > >
> > > https://github.com/apache/pulsar-client-python/pull/211 fixes that,
> but I'm
> > > not sure if a new version will be released.
> > >
> > > Thanks,
> > > Zixuan
>
Re: [DISCUSS] Release Apache Pulsar Python Client 3.4.1
Posted by Yunze Xu <xy...@apache.org>.
Sorry I missed the discussion link:
https://lists.apache.org/thread/5s2l9vgt5f973psb6xlttpmy4rpym7zh
Would this release block the Pulsar 3.3.0 release? If yes, a quicker
way to fix it was to add a `requirements.txt` that includes a proper
version of grpcio and then run `python -m pip install -r
python/requirements.txt`.
Here is an example:
```
pulsar-client == 3.5.0
protobuf>=3.6.1,<=3.20.3
grpcio >= 1.60.0
apache-bookkeeper-client>=4.16.1
prometheus_client
ratelimit
```
Thanks,
Yunze
On Sat, May 11, 2024 at 12:19 PM Yunze Xu <xy...@apache.org> wrote:
>
> Please release 3.5.1 rather than 3.4.1 because 3.5.0 is already
> released. It's too heavy to maintain old releases for client libraries
> for now.
>
> However, it would be better to remove the `functions` component from
> pulsar-client-python because the Python client itself never uses these
> dependencies. See my discussion [1] before. Since python functions is
> maintained in the Pulsar main repository, we should maintain the extra
> dependencies in the Pulsar main repo as well.
>
> Thanks,
> Yunze
>
> On Wed, May 8, 2024 at 11:26 PM Zixuan Liu <no...@gmail.com> wrote:
> >
> > Hi all,
> >
> > https://github.com/apache/pulsar-client-python/pull/174 breaks the
> > python-client installation in the pulsar arm image, and then the release
> > manager of pulsar@3.3.0 will take about 2 hours to build the grpcio wheel,
> > please see
> > https://github.com/nodece/pulsar-python-deps-build/actions/runs/8891459473/job/24418839959#step:6:315
> > for
> > details.
> >
> > https://github.com/apache/pulsar-client-python/pull/211 fixes that, but I'm
> > not sure if a new version will be released.
> >
> > Thanks,
> > Zixuan
Re: [DISCUSS] Release Apache Pulsar Python Client 3.4.1
Posted by Yunze Xu <xy...@apache.org>.
Please release 3.5.1 rather than 3.4.1 because 3.5.0 is already
released. It's too heavy to maintain old releases for client libraries
for now.
However, it would be better to remove the `functions` component from
pulsar-client-python because the Python client itself never uses these
dependencies. See my discussion [1] before. Since python functions is
maintained in the Pulsar main repository, we should maintain the extra
dependencies in the Pulsar main repo as well.
Thanks,
Yunze
On Wed, May 8, 2024 at 11:26 PM Zixuan Liu <no...@gmail.com> wrote:
>
> Hi all,
>
> https://github.com/apache/pulsar-client-python/pull/174 breaks the
> python-client installation in the pulsar arm image, and then the release
> manager of pulsar@3.3.0 will take about 2 hours to build the grpcio wheel,
> please see
> https://github.com/nodece/pulsar-python-deps-build/actions/runs/8891459473/job/24418839959#step:6:315
> for
> details.
>
> https://github.com/apache/pulsar-client-python/pull/211 fixes that, but I'm
> not sure if a new version will be released.
>
> Thanks,
> Zixuan