You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Chirag Katbamna <ck...@gmail.com> on 2020/12/30 22:13:07 UTC
Public IPv6 address in 4.15 RC2
Hello
I am trying to enter IPv6 addresses as my Public IP address. I am unable to
enter it during a fresh setup. I have verified my IPv6's are correct and
valid. But it seems only IPv4 is expected on the screen. See attached
screenshot.
My assumption is that IPv6 for public IP is supported to start with (my
first time trying it so not 100% sure). Do I need to enable anything
specific before it works? IPv6 on the local network is enabled already.
Thanks
Chirag K
Re: [VOTE] Apache Cloudstack 4.15.0.0 and UI [RC3]
Posted by Gabriel Bräscher <ga...@gmail.com>.
Another key point for IPv6 regards the hypervisor and network setup;
CloudStack supports IPv6 only for KVM, and when deploying zones with the
advanced network and security groups enabled.
Em qui., 31 de dez. de 2020 às 08:35, Andrija Panic <an...@gmail.com>
escreveu:
> afaik, IPv6 is only supported in Shared networks, and can't be used for
> Public network.
>
> On Thu, 31 Dec 2020 at 11:29, Chirag Katbamna <ck...@gmail.com> wrote:
>
> >
> >
> > Hello
> > I am trying to enter IPv6 addresses as my Public IP address. I am unable
> > to enter it during a fresh setup. I have verified my IPv6's are correct
> and
> > valid. But it seems only IPv4 is expected on the screen. See attached
> > screenshot.
> >
> > My assumption is that IPv6 for public IP is supported to start with (my
> > first time trying it so not 100% sure). Do I need to enable anything
> > specific before it works? IPv6 on the local network is enabled already.
> >
> > Thanks
> > Chirag K
> >
> >
> >
> >
>
> --
>
> Andrija Panić
>
Re: [VOTE] Apache Cloudstack 4.15.0.0 and UI [RC3]
Posted by Andrija Panic <an...@gmail.com>.
afaik, IPv6 is only supported in Shared networks, and can't be used for
Public network.
On Thu, 31 Dec 2020 at 11:29, Chirag Katbamna <ck...@gmail.com> wrote:
>
>
> Hello
> I am trying to enter IPv6 addresses as my Public IP address. I am unable
> to enter it during a fresh setup. I have verified my IPv6's are correct and
> valid. But it seems only IPv4 is expected on the screen. See attached
> screenshot.
>
> My assumption is that IPv6 for public IP is supported to start with (my
> first time trying it so not 100% sure). Do I need to enable anything
> specific before it works? IPv6 on the local network is enabled already.
>
> Thanks
> Chirag K
>
>
>
>
--
Andrija Panić
Re: [VOTE] Apache Cloudstack 4.15.0.0 and UI [RC3]
Posted by Chirag Katbamna <ck...@gmail.com>.
Hello
I am trying to enter IPv6 addresses as my Public IP address. I am unable to
enter it during a fresh setup. I have verified my IPv6's are correct and
valid. But it seems only IPv4 is expected on the screen. See attached
screenshot.
My assumption is that IPv6 for public IP is supported to start with (my
first time trying it so not 100% sure). Do I need to enable anything
specific before it works? IPv6 on the local network is enabled already.
Thanks
Chirag K
Re: Public IPv6 address in 4.15 RC2
Posted by Daan Hoogland <da...@gmail.com>.
Chirag, I don't think IPv6 only is supported yet (in the wizards) maybe the
dev list can give you some better answers.
On Thu, Dec 31, 2020 at 10:29 AM Chirag Katbamna <ck...@gmail.com>
wrote:
> Hello
> I am trying to enter IPv6 addresses as my Public IP address. I am unable
> to enter it during a fresh setup. I have verified my IPv6's are correct and
> valid. But it seems only IPv4 is expected on the screen. See attached
> screenshot.
>
> My assumption is that IPv6 for public IP is supported to start with (my
> first time trying it so not 100% sure). Do I need to enable anything
> specific before it works? IPv6 on the local network is enabled already.
>
> Thanks
> Chirag K
>
>
>
>
--
Daan