You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@tomcat.apache.org by rj...@apache.org on 2016/01/17 18:23:29 UTC
svn commit: r1725105 [3/4] - in /tomcat/jk/trunk: native/iis/pcre/
native/iis/pcre/doc/ native/iis/pcre/doc/html/ native/iis/pcre/sljit/
native/iis/pcre/testdata/ xdocs/miscellaneous/
Modified: tomcat/jk/trunk/native/iis/pcre/doc/pcrepattern.3
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/doc/pcrepattern.3?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/doc/pcrepattern.3 (original)
+++ tomcat/jk/trunk/native/iis/pcre/doc/pcrepattern.3 Sun Jan 17 17:23:28 2016
@@ -1,4 +1,4 @@
-.TH PCREPATTERN 3 "08 January 2014" "PCRE 8.35"
+.TH PCREPATTERN 3 "14 June 2015" "PCRE 8.38"
.SH NAME
PCRE - Perl-compatible regular expressions
.SH "PCRE REGULAR EXPRESSION DETAILS"
@@ -308,7 +308,8 @@ A second use of backslash provides a way
in patterns in a visible manner. There is no restriction on the appearance of
non-printing characters, apart from the binary zero that terminates a pattern,
but when a pattern is being prepared by text editing, it is often easier to use
-one of the following escape sequences than the binary character it represents:
+one of the following escape sequences than the binary character it represents.
+In an ASCII or Unicode environment, these escapes are as follows:
.sp
\ea alarm, that is, the BEL character (hex 07)
\ecx "control-x", where x is any ASCII character
@@ -331,18 +332,30 @@ but \ec{ becomes hex 3B ({ is 7B), and \
data item (byte or 16-bit value) following \ec has a value greater than 127, a
compile-time error occurs. This locks out non-ASCII characters in all modes.
.P
-The \ec facility was designed for use with ASCII characters, but with the
-extension to Unicode it is even less useful than it once was. It is, however,
-recognized when PCRE is compiled in EBCDIC mode, where data items are always
-bytes. In this mode, all values are valid after \ec. If the next character is a
-lower case letter, it is converted to upper case. Then the 0xc0 bits of the
-byte are inverted. Thus \ecA becomes hex 01, as in ASCII (A is C1), but because
-the EBCDIC letters are disjoint, \ecZ becomes hex 29 (Z is E9), and other
-characters also generate different values.
+When PCRE is compiled in EBCDIC mode, \ea, \ee, \ef, \en, \er, and \et
+generate the appropriate EBCDIC code values. The \ec escape is processed
+as specified for Perl in the \fBperlebcdic\fP document. The only characters
+that are allowed after \ec are A-Z, a-z, or one of @, [, \e, ], ^, _, or ?. Any
+other character provokes a compile-time error. The sequence \e@ encodes
+character code 0; the letters (in either case) encode characters 1-26 (hex 01
+to hex 1A); [, \e, ], ^, and _ encode characters 27-31 (hex 1B to hex 1F), and
+\e? becomes either 255 (hex FF) or 95 (hex 5F).
+.P
+Thus, apart from \e?, these escapes generate the same character code values as
+they do in an ASCII environment, though the meanings of the values mostly
+differ. For example, \eG always generates code value 7, which is BEL in ASCII
+but DEL in EBCDIC.
+.P
+The sequence \e? generates DEL (127, hex 7F) in an ASCII environment, but
+because 127 is not a control character in EBCDIC, Perl makes it generate the
+APC character. Unfortunately, there are several variants of EBCDIC. In most of
+them the APC character has the value 255 (hex FF), but in the one Perl calls
+POSIX-BC its value is 95 (hex 5F). If certain other characters have POSIX-BC
+values, PCRE makes \e? generate 95; otherwise it generates 255.
.P
After \e0 up to two further octal digits are read. If there are fewer than two
-digits, just those that are present are used. Thus the sequence \e0\ex\e07
-specifies two binary zeros followed by a BEL character (code value 7). Make
+digits, just those that are present are used. Thus the sequence \e0\ex\e015
+specifies two binary zeros followed by a CR character (code value 13). Make
sure you supply two digits after the initial zero if the pattern character that
follows is itself an octal digit.
.P
@@ -3283,6 +3296,6 @@ Cambridge CB2 3QH, England.
.rs
.sp
.nf
-Last updated: 08 January 2014
-Copyright (c) 1997-2014 University of Cambridge.
+Last updated: 14 June 2015
+Copyright (c) 1997-2015 University of Cambridge.
.fi
Modified: tomcat/jk/trunk/native/iis/pcre/pcre.h.generic
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcre.h.generic?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcre.h.generic (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcre.h.generic Sun Jan 17 17:23:28 2016
@@ -42,9 +42,9 @@ POSSIBILITY OF SUCH DAMAGE.
/* The current PCRE version information. */
#define PCRE_MAJOR 8
-#define PCRE_MINOR 37
+#define PCRE_MINOR 38
#define PCRE_PRERELEASE
-#define PCRE_DATE 2015-04-28
+#define PCRE_DATE 2015-11-23
/* When an application links to a PCRE DLL in Windows, the symbols that are
imported have to be identified as such. When building PCRE, the appropriate
Modified: tomcat/jk/trunk/native/iis/pcre/pcre_compile.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcre_compile.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcre_compile.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcre_compile.c Sun Jan 17 17:23:28 2016
@@ -174,7 +174,7 @@ static const short int escapes[] = {
-ESC_Z, CHAR_LEFT_SQUARE_BRACKET,
CHAR_BACKSLASH, CHAR_RIGHT_SQUARE_BRACKET,
CHAR_CIRCUMFLEX_ACCENT, CHAR_UNDERSCORE,
- CHAR_GRAVE_ACCENT, 7,
+ CHAR_GRAVE_ACCENT, ESC_a,
-ESC_b, 0,
-ESC_d, ESC_e,
ESC_f, 0,
@@ -202,9 +202,9 @@ static const short int escapes[] = {
/* 68 */ 0, 0, '|', ',', '%', '_', '>', '?',
/* 70 */ 0, 0, 0, 0, 0, 0, 0, 0,
/* 78 */ 0, '`', ':', '#', '@', '\'', '=', '"',
-/* 80 */ 0, 7, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0,
+/* 80 */ 0, ESC_a, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0,
/* 88 */-ESC_h, 0, 0, '{', 0, 0, 0, 0,
-/* 90 */ 0, 0, -ESC_k, 'l', 0, ESC_n, 0, -ESC_p,
+/* 90 */ 0, 0, -ESC_k, 0, 0, ESC_n, 0, -ESC_p,
/* 98 */ 0, ESC_r, 0, '}', 0, 0, 0, 0,
/* A0 */ 0, '~', -ESC_s, ESC_tee, 0,-ESC_v, -ESC_w, 0,
/* A8 */ 0,-ESC_z, 0, 0, 0, '[', 0, 0,
@@ -219,6 +219,12 @@ static const short int escapes[] = {
/* F0 */ 0, 0, 0, 0, 0, 0, 0, 0,
/* F8 */ 0, 0, 0, 0, 0, 0, 0, 0
};
+
+/* We also need a table of characters that may follow \c in an EBCDIC
+environment for characters 0-31. */
+
+static unsigned char ebcdic_escape_c[] = "@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_";
+
#endif
@@ -458,7 +464,7 @@ static const char error_texts[] =
"range out of order in character class\0"
"nothing to repeat\0"
/* 10 */
- "operand of unlimited repeat could match the empty string\0" /** DEAD **/
+ "internal error: invalid forward reference offset\0"
"internal error: unexpected repeat\0"
"unrecognized character after (? or (?-\0"
"POSIX named classes are supported only within a class\0"
@@ -527,7 +533,11 @@ static const char error_texts[] =
"different names for subpatterns of the same number are not allowed\0"
"(*MARK) must have an argument\0"
"this version of PCRE is not compiled with Unicode property support\0"
+#ifndef EBCDIC
"\\c must be followed by an ASCII character\0"
+#else
+ "\\c must be followed by a letter or one of [\\]^_?\0"
+#endif
"\\k is not followed by a braced, angle-bracketed, or quoted name\0"
/* 70 */
"internal error: unknown opcode in find_fixedlength()\0"
@@ -1425,7 +1435,16 @@ else
c ^= 0x40;
#else /* EBCDIC coding */
if (c >= CHAR_a && c <= CHAR_z) c += 64;
- c ^= 0xC0;
+ if (c == CHAR_QUESTION_MARK)
+ c = ('\\' == 188 && '`' == 74)? 0x5f : 0xff;
+ else
+ {
+ for (i = 0; i < 32; i++)
+ {
+ if (c == ebcdic_escape_c[i]) break;
+ }
+ if (i < 32) c = i; else *errorcodeptr = ERR68;
+ }
#endif
break;
@@ -1799,7 +1818,7 @@ for (;;)
case OP_ASSERTBACK:
case OP_ASSERTBACK_NOT:
do cc += GET(cc, 1); while (*cc == OP_ALT);
- cc += PRIV(OP_lengths)[*cc];
+ cc += 1 + LINK_SIZE;
break;
/* Skip over things that don't match chars */
@@ -2487,7 +2506,7 @@ for (code = first_significant_code(code
if (c == OP_BRA || c == OP_BRAPOS ||
c == OP_CBRA || c == OP_CBRAPOS ||
c == OP_ONCE || c == OP_ONCE_NC ||
- c == OP_COND)
+ c == OP_COND || c == OP_SCOND)
{
BOOL empty_branch;
if (GET(code, 1) == 0) return TRUE; /* Hit unclosed bracket */
@@ -3886,11 +3905,11 @@ didn't consider this to be a POSIX class
The problem in trying to be exactly like Perl is in the handling of escapes. We
have to be sure that [abc[:x\]pqr] is *not* treated as containing a POSIX
class, but [abc[:x\]pqr:]] is (so that an error can be generated). The code
-below handles the special case of \], but does not try to do any other escape
-processing. This makes it different from Perl for cases such as [:l\ower:]
-where Perl recognizes it as the POSIX class "lower" but PCRE does not recognize
-"l\ower". This is a lesser evil than not diagnosing bad classes when Perl does,
-I think.
+below handles the special cases \\ and \], but does not try to do any other
+escape processing. This makes it different from Perl for cases such as
+[:l\ower:] where Perl recognizes it as the POSIX class "lower" but PCRE does
+not recognize "l\ower". This is a lesser evil than not diagnosing bad classes
+when Perl does, I think.
A user pointed out that PCRE was rejecting [:a[:digit:]] whereas Perl was not.
It seems that the appearance of a nested POSIX class supersedes an apparent
@@ -3917,21 +3936,16 @@ pcre_uchar terminator; /* Don't
terminator = *(++ptr); /* compiler warns about "non-constant" initializer. */
for (++ptr; *ptr != CHAR_NULL; ptr++)
{
- if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
+ if (*ptr == CHAR_BACKSLASH &&
+ (ptr[1] == CHAR_RIGHT_SQUARE_BRACKET ||
+ ptr[1] == CHAR_BACKSLASH))
ptr++;
- else if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE;
- else
+ else if ((*ptr == CHAR_LEFT_SQUARE_BRACKET && ptr[1] == terminator) ||
+ *ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE;
+ else if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
{
- if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
- {
- *endptr = ptr;
- return TRUE;
- }
- if (*ptr == CHAR_LEFT_SQUARE_BRACKET &&
- (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
- ptr[1] == CHAR_EQUALS_SIGN) &&
- check_posix_syntax(ptr, endptr))
- return FALSE;
+ *endptr = ptr;
+ return TRUE;
}
}
return FALSE;
@@ -3985,11 +3999,12 @@ have their offsets adjusted. That one of
is called, the partially compiled regex must be temporarily terminated with
OP_END.
-This function has been extended with the possibility of forward references for
-recursions and subroutine calls. It must also check the list of such references
-for the group we are dealing with. If it finds that one of the recursions in
-the current group is on this list, it adjusts the offset in the list, not the
-value in the reference (which is a group number).
+This function has been extended to cope with forward references for recursions
+and subroutine calls. It must check the list of such references for the
+group we are dealing with. If it finds that one of the recursions in the
+current group is on this list, it does not adjust the value in the reference
+(which is a group number). After the group has been scanned, all the offsets in
+the forward reference list for the group are adjusted.
Arguments:
group points to the start of the group
@@ -4005,29 +4020,21 @@ static void
adjust_recurse(pcre_uchar *group, int adjust, BOOL utf, compile_data *cd,
size_t save_hwm_offset)
{
+int offset;
+pcre_uchar *hc;
pcre_uchar *ptr = group;
while ((ptr = (pcre_uchar *)find_recurse(ptr, utf)) != NULL)
{
- int offset;
- pcre_uchar *hc;
-
- /* See if this recursion is on the forward reference list. If so, adjust the
- reference. */
-
for (hc = (pcre_uchar *)cd->start_workspace + save_hwm_offset; hc < cd->hwm;
hc += LINK_SIZE)
{
offset = (int)GET(hc, 0);
- if (cd->start_code + offset == ptr + 1)
- {
- PUT(hc, 0, offset + adjust);
- break;
- }
+ if (cd->start_code + offset == ptr + 1) break;
}
- /* Otherwise, adjust the recursion offset if it's after the start of this
- group. */
+ /* If we have not found this recursion on the forward reference list, adjust
+ the recursion's offset if it's after the start of this group. */
if (hc >= cd->hwm)
{
@@ -4037,6 +4044,15 @@ while ((ptr = (pcre_uchar *)find_recurse
ptr += 1 + LINK_SIZE;
}
+
+/* Now adjust all forward reference offsets for the group. */
+
+for (hc = (pcre_uchar *)cd->start_workspace + save_hwm_offset; hc < cd->hwm;
+ hc += LINK_SIZE)
+ {
+ offset = (int)GET(hc, 0);
+ PUT(hc, 0, offset + adjust);
+ }
}
@@ -4465,7 +4481,7 @@ const pcre_uchar *tempptr;
const pcre_uchar *nestptr = NULL;
pcre_uchar *previous = NULL;
pcre_uchar *previous_callout = NULL;
-size_t save_hwm_offset = 0;
+size_t item_hwm_offset = 0;
pcre_uint8 classbits[32];
/* We can fish out the UTF-8 setting once and for all into a BOOL, but we
@@ -4623,8 +4639,7 @@ for (;; ptr++)
/* In the real compile phase, just check the workspace used by the forward
reference list. */
- else if (cd->hwm > cd->start_workspace + cd->workspace_size -
- WORK_SIZE_SAFETY_MARGIN)
+ else if (cd->hwm > cd->start_workspace + cd->workspace_size)
{
*errorcodeptr = ERR52;
goto FAILED;
@@ -4767,6 +4782,7 @@ for (;; ptr++)
zeroreqchar = reqchar;
zeroreqcharflags = reqcharflags;
previous = code;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
*code++ = ((options & PCRE_DOTALL) != 0)? OP_ALLANY: OP_ANY;
break;
@@ -4818,6 +4834,7 @@ for (;; ptr++)
/* Handle a real character class. */
previous = code;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
/* PCRE supports POSIX class stuff inside a class. Perl gives an error if
they are encountered at the top level, so we'll do that too. */
@@ -4923,9 +4940,10 @@ for (;; ptr++)
(which is on the stack). We have to remember that there was XCLASS data,
however. */
+ if (class_uchardata > class_uchardata_base) xclass = TRUE;
+
if (lengthptr != NULL && class_uchardata > class_uchardata_base)
{
- xclass = TRUE;
*lengthptr += (int)(class_uchardata - class_uchardata_base);
class_uchardata = class_uchardata_base;
}
@@ -5028,10 +5046,26 @@ for (;; ptr++)
ptr = tempptr + 1;
continue;
- /* For all other POSIX classes, no special action is taken in UCP
- mode. Fall through to the non_UCP case. */
+ /* For the other POSIX classes (ascii, xdigit) we are going to fall
+ through to the non-UCP case and build a bit map for characters with
+ code points less than 256. If we are in a negated POSIX class
+ within a non-negated overall class, characters with code points
+ greater than 255 must all match. In the special case where we have
+ not yet generated any xclass data, and this is the final item in
+ the overall class, we need do nothing: later on, the opcode
+ OP_NCLASS will be used to indicate that characters greater than 255
+ are acceptable. If we have already seen an xclass item or one may
+ follow (we have to assume that it might if this is not the end of
+ the class), explicitly match all wide codepoints. */
default:
+ if (!negate_class && local_negate &&
+ (xclass || tempptr[2] != CHAR_RIGHT_SQUARE_BRACKET))
+ {
+ *class_uchardata++ = XCL_RANGE;
+ class_uchardata += PRIV(ord2utf)(0x100, class_uchardata);
+ class_uchardata += PRIV(ord2utf)(0x10ffff, class_uchardata);
+ }
break;
}
}
@@ -5195,9 +5229,9 @@ for (;; ptr++)
cd, PRIV(vspace_list));
continue;
-#ifdef SUPPORT_UCP
case ESC_p:
case ESC_P:
+#ifdef SUPPORT_UCP
{
BOOL negated;
unsigned int ptype = 0, pdata = 0;
@@ -5211,6 +5245,9 @@ for (;; ptr++)
class_has_8bitchar--; /* Undo! */
continue;
}
+#else
+ *errorcodeptr = ERR45;
+ goto FAILED;
#endif
/* Unrecognized escapes are faulted if PCRE is running in its
strict mode. By default, for compatibility with Perl, they are
@@ -5367,16 +5404,20 @@ for (;; ptr++)
CLASS_SINGLE_CHARACTER:
if (class_one_char < 2) class_one_char++;
- /* If class_one_char is 1, we have the first single character in the
- class, and there have been no prior ranges, or XCLASS items generated by
- escapes. If this is the final character in the class, we can optimize by
- turning the item into a 1-character OP_CHAR[I] if it's positive, or
- OP_NOT[I] if it's negative. In the positive case, it can cause firstchar
- to be set. Otherwise, there can be no first char if this item is first,
- whatever repeat count may follow. In the case of reqchar, save the
- previous value for reinstating. */
+ /* If xclass_has_prop is false and class_one_char is 1, we have the first
+ single character in the class, and there have been no prior ranges, or
+ XCLASS items generated by escapes. If this is the final character in the
+ class, we can optimize by turning the item into a 1-character OP_CHAR[I]
+ if it's positive, or OP_NOT[I] if it's negative. In the positive case, it
+ can cause firstchar to be set. Otherwise, there can be no first char if
+ this item is first, whatever repeat count may follow. In the case of
+ reqchar, save the previous value for reinstating. */
- if (!inescq && class_one_char == 1 && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
+ if (!inescq &&
+#ifdef SUPPORT_UCP
+ !xclass_has_prop &&
+#endif
+ class_one_char == 1 && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
{
ptr++;
zeroreqchar = reqchar;
@@ -5492,9 +5533,10 @@ for (;; ptr++)
actual compiled code. */
#ifdef SUPPORT_UTF
- if (xclass && (!should_flip_negation || (options & PCRE_UCP) != 0))
+ if (xclass && (xclass_has_prop || !should_flip_negation ||
+ (options & PCRE_UCP) != 0))
#elif !defined COMPILE_PCRE8
- if (xclass && !should_flip_negation)
+ if (xclass && (xclass_has_prop || !should_flip_negation))
#endif
#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
{
@@ -5930,7 +5972,7 @@ for (;; ptr++)
{
register int i;
int len = (int)(code - previous);
- size_t base_hwm_offset = save_hwm_offset;
+ size_t base_hwm_offset = item_hwm_offset;
pcre_uchar *bralink = NULL;
pcre_uchar *brazeroptr = NULL;
@@ -5985,7 +6027,7 @@ for (;; ptr++)
if (repeat_max <= 1) /* Covers 0, 1, and unlimited */
{
*code = OP_END;
- adjust_recurse(previous, 1, utf, cd, save_hwm_offset);
+ adjust_recurse(previous, 1, utf, cd, item_hwm_offset);
memmove(previous + 1, previous, IN_UCHARS(len));
code++;
if (repeat_max == 0)
@@ -6009,7 +6051,7 @@ for (;; ptr++)
{
int offset;
*code = OP_END;
- adjust_recurse(previous, 2 + LINK_SIZE, utf, cd, save_hwm_offset);
+ adjust_recurse(previous, 2 + LINK_SIZE, utf, cd, item_hwm_offset);
memmove(previous + 2 + LINK_SIZE, previous, IN_UCHARS(len));
code += 2 + LINK_SIZE;
*previous++ = OP_BRAZERO + repeat_type;
@@ -6254,6 +6296,12 @@ for (;; ptr++)
while (*scode == OP_ALT);
}
+ /* A conditional group with only one branch has an implicit empty
+ alternative branch. */
+
+ if (*bracode == OP_COND && bracode[GET(bracode,1)] != OP_ALT)
+ *bracode = OP_SCOND;
+
/* Handle possessive quantifiers. */
if (possessive_quantifier)
@@ -6267,11 +6315,11 @@ for (;; ptr++)
{
int nlen = (int)(code - bracode);
*code = OP_END;
- adjust_recurse(bracode, 1 + LINK_SIZE, utf, cd, save_hwm_offset);
+ adjust_recurse(bracode, 1 + LINK_SIZE, utf, cd, item_hwm_offset);
memmove(bracode + 1 + LINK_SIZE, bracode, IN_UCHARS(nlen));
code += 1 + LINK_SIZE;
nlen += 1 + LINK_SIZE;
- *bracode = OP_BRAPOS;
+ *bracode = (*bracode == OP_COND)? OP_BRAPOS : OP_SBRAPOS;
*code++ = OP_KETRPOS;
PUTINC(code, 0, nlen);
PUT(bracode, 1, nlen);
@@ -6401,7 +6449,7 @@ for (;; ptr++)
else
{
*code = OP_END;
- adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm_offset);
+ adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, item_hwm_offset);
memmove(tempcode + 1 + LINK_SIZE, tempcode, IN_UCHARS(len));
code += 1 + LINK_SIZE;
len += 1 + LINK_SIZE;
@@ -6450,7 +6498,7 @@ for (;; ptr++)
default:
*code = OP_END;
- adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm_offset);
+ adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, item_hwm_offset);
memmove(tempcode + 1 + LINK_SIZE, tempcode, IN_UCHARS(len));
code += 1 + LINK_SIZE;
len += 1 + LINK_SIZE;
@@ -6586,9 +6634,17 @@ for (;; ptr++)
goto FAILED;
}
setverb = *code++ = verbs[i].op_arg;
- *code++ = arglen;
- memcpy(code, arg, IN_UCHARS(arglen));
- code += arglen;
+ if (lengthptr != NULL) /* In pass 1 just add in the length */
+ { /* to avoid potential workspace */
+ *lengthptr += arglen; /* overflow. */
+ *code++ = 0;
+ }
+ else
+ {
+ *code++ = arglen;
+ memcpy(code, arg, IN_UCHARS(arglen));
+ code += arglen;
+ }
*code++ = 0;
}
@@ -6623,7 +6679,7 @@ for (;; ptr++)
newoptions = options;
skipbytes = 0;
bravalue = OP_CBRA;
- save_hwm_offset = cd->hwm - cd->start_workspace;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
reset_bracount = FALSE;
/* Deal with the extended parentheses; all are introduced by '?', and the
@@ -6641,6 +6697,7 @@ for (;; ptr++)
/* ------------------------------------------------------------ */
case CHAR_VERTICAL_LINE: /* Reset capture count for each branch */
reset_bracount = TRUE;
+ cd->dupgroups = TRUE; /* Record (?| encountered */
/* Fall through */
/* ------------------------------------------------------------ */
@@ -6741,6 +6798,12 @@ for (;; ptr++)
{
while (IS_DIGIT(*ptr))
{
+ if (recno > INT_MAX / 10 - 1) /* Integer overflow */
+ {
+ while (IS_DIGIT(*ptr)) ptr++;
+ *errorcodeptr = ERR61;
+ goto FAILED;
+ }
recno = recno * 10 + (int)(*ptr - CHAR_0);
ptr++;
}
@@ -6769,7 +6832,7 @@ for (;; ptr++)
ptr++;
}
namelen = (int)(ptr - name);
- if (lengthptr != NULL) *lengthptr += IMM2_SIZE;
+ if (lengthptr != NULL) skipbytes += IMM2_SIZE;
}
/* Check the terminator */
@@ -6875,6 +6938,11 @@ for (;; ptr++)
*errorcodeptr = ERR15;
goto FAILED;
}
+ if (recno > INT_MAX / 10 - 1) /* Integer overflow */
+ {
+ *errorcodeptr = ERR61;
+ goto FAILED;
+ }
recno = recno * 10 + name[i] - CHAR_0;
}
if (recno == 0) recno = RREF_ANY;
@@ -7151,6 +7219,7 @@ for (;; ptr++)
if (lengthptr != NULL)
{
named_group *ng;
+ recno = 0;
if (namelen == 0)
{
@@ -7168,20 +7237,6 @@ for (;; ptr++)
goto FAILED;
}
- /* The name table does not exist in the first pass; instead we must
- scan the list of names encountered so far in order to get the
- number. If the name is not found, set the value to 0 for a forward
- reference. */
-
- ng = cd->named_groups;
- for (i = 0; i < cd->names_found; i++, ng++)
- {
- if (namelen == ng->length &&
- STRNCMP_UC_UC(name, ng->name, namelen) == 0)
- break;
- }
- recno = (i < cd->names_found)? ng->number : 0;
-
/* Count named back references. */
if (!is_recurse) cd->namedrefcount++;
@@ -7191,6 +7246,56 @@ for (;; ptr++)
16-bit data item. */
*lengthptr += IMM2_SIZE;
+
+ /* If this is a forward reference and we are within a (?|...) group,
+ the reference may end up as the number of a group which we are
+ currently inside, that is, it could be a recursive reference. In the
+ real compile this will be picked up and the reference wrapped with
+ OP_ONCE to make it atomic, so we must space in case this occurs. */
+
+ /* In fact, this can happen for a non-forward reference because
+ another group with the same number might be created later. This
+ issue is fixed "properly" in PCRE2. As PCRE1 is now in maintenance
+ only mode, we finesse the bug by allowing more memory always. */
+
+ *lengthptr += 2 + 2*LINK_SIZE;
+
+ /* It is even worse than that. The current reference may be to an
+ existing named group with a different number (so apparently not
+ recursive) but which later on is also attached to a group with the
+ current number. This can only happen if $(| has been previous
+ encountered. In that case, we allow yet more memory, just in case.
+ (Again, this is fixed "properly" in PCRE2. */
+
+ if (cd->dupgroups) *lengthptr += 4 + 4*LINK_SIZE;
+
+ /* Otherwise, check for recursion here. The name table does not exist
+ in the first pass; instead we must scan the list of names encountered
+ so far in order to get the number. If the name is not found, leave
+ the value of recno as 0 for a forward reference. */
+
+ else
+ {
+ ng = cd->named_groups;
+ for (i = 0; i < cd->names_found; i++, ng++)
+ {
+ if (namelen == ng->length &&
+ STRNCMP_UC_UC(name, ng->name, namelen) == 0)
+ {
+ open_capitem *oc;
+ recno = ng->number;
+ if (is_recurse) break;
+ for (oc = cd->open_caps; oc != NULL; oc = oc->next)
+ {
+ if (oc->number == recno)
+ {
+ oc->flag = TRUE;
+ break;
+ }
+ }
+ }
+ }
+ }
}
/* In the real compile, search the name table. We check the name
@@ -7237,8 +7342,6 @@ for (;; ptr++)
for (i++; i < cd->names_found; i++)
{
if (STRCMP_UC_UC(slot + IMM2_SIZE, cslot + IMM2_SIZE) != 0) break;
-
-
count++;
cslot += cd->name_entry_size;
}
@@ -7247,6 +7350,7 @@ for (;; ptr++)
{
if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
previous = code;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
*code++ = ((options & PCRE_CASELESS) != 0)? OP_DNREFI : OP_DNREF;
PUT2INC(code, 0, index);
PUT2INC(code, 0, count);
@@ -7284,9 +7388,14 @@ for (;; ptr++)
/* ------------------------------------------------------------ */
- case CHAR_R: /* Recursion */
- ptr++; /* Same as (?0) */
- /* Fall through */
+ case CHAR_R: /* Recursion, same as (?0) */
+ recno = 0;
+ if (*(++ptr) != CHAR_RIGHT_PARENTHESIS)
+ {
+ *errorcodeptr = ERR29;
+ goto FAILED;
+ }
+ goto HANDLE_RECURSION;
/* ------------------------------------------------------------ */
@@ -7323,7 +7432,15 @@ for (;; ptr++)
recno = 0;
while(IS_DIGIT(*ptr))
+ {
+ if (recno > INT_MAX / 10 - 1) /* Integer overflow */
+ {
+ while (IS_DIGIT(*ptr)) ptr++;
+ *errorcodeptr = ERR61;
+ goto FAILED;
+ }
recno = recno * 10 + *ptr++ - CHAR_0;
+ }
if (*ptr != (pcre_uchar)terminator)
{
@@ -7360,6 +7477,7 @@ for (;; ptr++)
HANDLE_RECURSION:
previous = code;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
called = cd->start_code;
/* When we are actually compiling, find the bracket that is being
@@ -7561,7 +7679,11 @@ for (;; ptr++)
previous = NULL;
cd->iscondassert = FALSE;
}
- else previous = code;
+ else
+ {
+ previous = code;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
+ }
*code = bravalue;
tempcode = code;
@@ -7809,7 +7931,7 @@ for (;; ptr++)
const pcre_uchar *p;
pcre_uint32 cf;
- save_hwm_offset = cd->hwm - cd->start_workspace; /* Normally this is set when '(' is read */
+ item_hwm_offset = cd->hwm - cd->start_workspace; /* Normally this is set when '(' is read */
terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)?
CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE;
@@ -7838,7 +7960,7 @@ for (;; ptr++)
if (*p != (pcre_uchar)terminator)
{
*errorcodeptr = ERR57;
- break;
+ goto FAILED;
}
ptr++;
goto HANDLE_NUMERICAL_RECURSION;
@@ -7853,7 +7975,7 @@ for (;; ptr++)
ptr[1] != CHAR_APOSTROPHE && ptr[1] != CHAR_LEFT_CURLY_BRACKET))
{
*errorcodeptr = ERR69;
- break;
+ goto FAILED;
}
is_recurse = FALSE;
terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)?
@@ -7877,6 +7999,7 @@ for (;; ptr++)
HANDLE_REFERENCE:
if (firstcharflags == REQ_UNSET) firstcharflags = REQ_NONE;
previous = code;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
*code++ = ((options & PCRE_CASELESS) != 0)? OP_REFI : OP_REF;
PUT2INC(code, 0, recno);
cd->backref_map |= (recno < 32)? (1 << recno) : 1;
@@ -7906,6 +8029,7 @@ for (;; ptr++)
if (!get_ucp(&ptr, &negated, &ptype, &pdata, errorcodeptr))
goto FAILED;
previous = code;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
*code++ = ((escape == ESC_p) != negated)? OP_PROP : OP_NOTPROP;
*code++ = ptype;
*code++ = pdata;
@@ -7946,6 +8070,7 @@ for (;; ptr++)
{
previous = (escape > ESC_b && escape < ESC_Z)? code : NULL;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
*code++ = (!utf && escape == ESC_C)? OP_ALLANY : escape;
}
}
@@ -7989,6 +8114,7 @@ for (;; ptr++)
ONE_CHAR:
previous = code;
+ item_hwm_offset = cd->hwm - cd->start_workspace;
/* For caseless UTF-8 mode when UCP support is available, check whether
this character has more than one other case. If so, generate a special
@@ -9164,6 +9290,7 @@ cd->names_found = 0;
cd->name_entry_size = 0;
cd->name_table = NULL;
cd->dupnames = FALSE;
+cd->dupgroups = FALSE;
cd->namedrefcount = 0;
cd->start_code = cworkspace;
cd->hwm = cworkspace;
@@ -9336,6 +9463,16 @@ if (cd->hwm > cd->start_workspace)
int offset, recno;
cd->hwm -= LINK_SIZE;
offset = GET(cd->hwm, 0);
+
+ /* Check that the hwm handling hasn't gone wrong. This whole area is
+ rewritten in PCRE2 because there are some obscure cases. */
+
+ if (offset == 0 || codestart[offset-1] != OP_RECURSE)
+ {
+ errorcode = ERR10;
+ break;
+ }
+
recno = GET(codestart, offset);
if (recno != prev_recno)
{
@@ -9366,7 +9503,7 @@ used in this code because at least one c
"const" attribute if the cast (pcre_uchar *)codestart is used directly in the
function call. */
-if ((options & PCRE_NO_AUTO_POSSESS) == 0)
+if (errorcode == 0 && (options & PCRE_NO_AUTO_POSSESS) == 0)
{
pcre_uchar *temp = (pcre_uchar *)codestart;
auto_possessify(temp, utf, cd);
@@ -9380,7 +9517,7 @@ OP_RECURSE that are not fixed length get
exceptional ones forgo this. We scan the pattern to check that they are fixed
length, and set their lengths. */
-if (cd->check_lookbehind)
+if (errorcode == 0 && cd->check_lookbehind)
{
pcre_uchar *cc = (pcre_uchar *)codestart;
@@ -9593,4 +9730,3 @@ return (pcre32 *)re;
}
/* End of pcre_compile.c */
-
Modified: tomcat/jk/trunk/native/iis/pcre/pcre_exec.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcre_exec.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcre_exec.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcre_exec.c Sun Jan 17 17:23:28 2016
@@ -6685,7 +6685,8 @@ if (md->offset_vector != NULL)
register int *iend = iptr - re->top_bracket;
if (iend < md->offset_vector + 2) iend = md->offset_vector + 2;
while (--iptr >= iend) *iptr = -1;
- md->offset_vector[0] = md->offset_vector[1] = -1;
+ if (offsetcount > 0) md->offset_vector[0] = -1;
+ if (offsetcount > 1) md->offset_vector[1] = -1;
}
/* Set up the first character to match, if available. The first_char value is
Modified: tomcat/jk/trunk/native/iis/pcre/pcre_internal.h
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcre_internal.h?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcre_internal.h (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcre_internal.h Sun Jan 17 17:23:28 2016
@@ -984,7 +984,7 @@ other. NOTE: The values also appear in p
#ifndef EBCDIC
#define HSPACE_LIST \
- CHAR_HT, CHAR_SPACE, 0xa0, \
+ CHAR_HT, CHAR_SPACE, CHAR_NBSP, \
0x1680, 0x180e, 0x2000, 0x2001, 0x2002, 0x2003, 0x2004, 0x2005, \
0x2006, 0x2007, 0x2008, 0x2009, 0x200A, 0x202f, 0x205f, 0x3000, \
NOTACHAR
@@ -1010,7 +1010,7 @@ other. NOTE: The values also appear in p
#define HSPACE_BYTE_CASES \
case CHAR_HT: \
case CHAR_SPACE: \
- case 0xa0 /* NBSP */
+ case CHAR_NBSP
#define HSPACE_CASES \
HSPACE_BYTE_CASES: \
@@ -1037,11 +1037,12 @@ other. NOTE: The values also appear in p
/* ------ EBCDIC environments ------ */
#else
-#define HSPACE_LIST CHAR_HT, CHAR_SPACE
+#define HSPACE_LIST CHAR_HT, CHAR_SPACE, CHAR_NBSP, NOTACHAR
#define HSPACE_BYTE_CASES \
case CHAR_HT: \
- case CHAR_SPACE
+ case CHAR_SPACE: \
+ case CHAR_NBSP
#define HSPACE_CASES HSPACE_BYTE_CASES
@@ -1215,6 +1216,7 @@ same code point. */
#define CHAR_ESC '\047'
#define CHAR_DEL '\007'
+#define CHAR_NBSP '\x41'
#define STR_ESC "\047"
#define STR_DEL "\007"
@@ -1229,6 +1231,7 @@ a positive value. */
#define CHAR_NEL ((unsigned char)'\x85')
#define CHAR_ESC '\033'
#define CHAR_DEL '\177'
+#define CHAR_NBSP ((unsigned char)'\xa0')
#define STR_LF "\n"
#define STR_NL STR_LF
@@ -1606,6 +1609,7 @@ only. */
#define CHAR_VERTICAL_LINE '\174'
#define CHAR_RIGHT_CURLY_BRACKET '\175'
#define CHAR_TILDE '\176'
+#define CHAR_NBSP ((unsigned char)'\xa0')
#define STR_HT "\011"
#define STR_VT "\013"
@@ -1762,6 +1766,10 @@ only. */
/* Escape items that are just an encoding of a particular data value. */
+#ifndef ESC_a
+#define ESC_a CHAR_BEL
+#endif
+
#ifndef ESC_e
#define ESC_e CHAR_ESC
#endif
@@ -2446,6 +2454,7 @@ typedef struct compile_data {
BOOL had_pruneorskip; /* (*PRUNE) or (*SKIP) encountered */
BOOL check_lookbehind; /* Lookbehinds need later checking */
BOOL dupnames; /* Duplicate names exist */
+ BOOL dupgroups; /* Duplicate groups exist: (?| found */
BOOL iscondassert; /* Next assert is a condition */
int nltype; /* Newline type */
int nllen; /* Newline string length */
Modified: tomcat/jk/trunk/native/iis/pcre/pcre_jit_compile.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcre_jit_compile.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcre_jit_compile.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcre_jit_compile.c Sun Jan 17 17:23:28 2016
@@ -1064,6 +1064,7 @@ pcre_uchar *alternative;
pcre_uchar *end = NULL;
int private_data_ptr = *private_data_start;
int space, size, bracketlen;
+BOOL repeat_check = TRUE;
while (cc < ccend)
{
@@ -1071,9 +1072,10 @@ while (cc < ccend)
size = 0;
bracketlen = 0;
if (private_data_ptr > SLJIT_MAX_LOCAL_SIZE)
- return;
+ break;
- if (*cc == OP_ONCE || *cc == OP_ONCE_NC || *cc == OP_BRA || *cc == OP_CBRA || *cc == OP_COND)
+ if (repeat_check && (*cc == OP_ONCE || *cc == OP_ONCE_NC || *cc == OP_BRA || *cc == OP_CBRA || *cc == OP_COND))
+ {
if (detect_repeat(common, cc))
{
/* These brackets are converted to repeats, so no global
@@ -1081,6 +1083,8 @@ while (cc < ccend)
if (cc >= end)
end = bracketend(cc);
}
+ }
+ repeat_check = TRUE;
switch(*cc)
{
@@ -1136,6 +1140,13 @@ while (cc < ccend)
bracketlen = 1 + LINK_SIZE + IMM2_SIZE;
break;
+ case OP_BRAZERO:
+ case OP_BRAMINZERO:
+ case OP_BRAPOSZERO:
+ repeat_check = FALSE;
+ size = 1;
+ break;
+
CASE_ITERATOR_PRIVATE_DATA_1
space = 1;
size = -2;
@@ -1162,12 +1173,17 @@ while (cc < ccend)
size = 1;
break;
- CASE_ITERATOR_TYPE_PRIVATE_DATA_2B
+ case OP_TYPEUPTO:
if (cc[1 + IMM2_SIZE] != OP_ANYNL && cc[1 + IMM2_SIZE] != OP_EXTUNI)
space = 2;
size = 1 + IMM2_SIZE;
break;
+ case OP_TYPEMINUPTO:
+ space = 2;
+ size = 1 + IMM2_SIZE;
+ break;
+
case OP_CLASS:
case OP_NCLASS:
size += 1 + 32 / sizeof(pcre_uchar);
@@ -1316,6 +1332,13 @@ while (cc < ccend)
cc += 1 + LINK_SIZE + IMM2_SIZE;
break;
+ case OP_THEN:
+ stack_restore = TRUE;
+ if (common->control_head_ptr != 0)
+ *needs_control_head = TRUE;
+ cc ++;
+ break;
+
default:
stack_restore = TRUE;
/* Fall through. */
@@ -2220,6 +2243,7 @@ while (current != NULL)
SLJIT_ASSERT_STOP();
break;
}
+ SLJIT_ASSERT(current > (sljit_sw*)current[-1]);
current = (sljit_sw*)current[-1];
}
return -1;
@@ -3209,7 +3233,7 @@ bytes[len] = byte;
bytes[0] = len;
}
-static int scan_prefix(compiler_common *common, pcre_uchar *cc, pcre_uint32 *chars, pcre_uint8 *bytes, int max_chars)
+static int scan_prefix(compiler_common *common, pcre_uchar *cc, pcre_uint32 *chars, pcre_uint8 *bytes, int max_chars, pcre_uint32 *rec_count)
{
/* Recursive function, which scans prefix literals. */
BOOL last, any, caseless;
@@ -3227,9 +3251,14 @@ pcre_uchar othercase[1];
repeat = 1;
while (TRUE)
{
+ if (*rec_count == 0)
+ return 0;
+ (*rec_count)--;
+
last = TRUE;
any = FALSE;
caseless = FALSE;
+
switch (*cc)
{
case OP_CHARI:
@@ -3291,7 +3320,7 @@ while (TRUE)
#ifdef SUPPORT_UTF
if (common->utf && HAS_EXTRALEN(*cc)) len += GET_EXTRALEN(*cc);
#endif
- max_chars = scan_prefix(common, cc + len, chars, bytes, max_chars);
+ max_chars = scan_prefix(common, cc + len, chars, bytes, max_chars, rec_count);
if (max_chars == 0)
return consumed;
last = FALSE;
@@ -3314,7 +3343,7 @@ while (TRUE)
alternative = cc + GET(cc, 1);
while (*alternative == OP_ALT)
{
- max_chars = scan_prefix(common, alternative + 1 + LINK_SIZE, chars, bytes, max_chars);
+ max_chars = scan_prefix(common, alternative + 1 + LINK_SIZE, chars, bytes, max_chars, rec_count);
if (max_chars == 0)
return consumed;
alternative += GET(alternative, 1);
@@ -3556,6 +3585,7 @@ int i, max, from;
int range_right = -1, range_len = 3 - 1;
sljit_ub *update_table = NULL;
BOOL in_range;
+pcre_uint32 rec_count;
for (i = 0; i < MAX_N_CHARS; i++)
{
@@ -3564,7 +3594,8 @@ for (i = 0; i < MAX_N_CHARS; i++)
bytes[i * MAX_N_BYTES] = 0;
}
-max = scan_prefix(common, common->start, chars, bytes, MAX_N_CHARS);
+rec_count = 10000;
+max = scan_prefix(common, common->start, chars, bytes, MAX_N_CHARS, &rec_count);
if (max <= 1)
return FALSE;
@@ -4311,8 +4342,10 @@ switch(length)
case 4:
if ((ranges[1] - ranges[0]) == (ranges[3] - ranges[2])
&& (ranges[0] | (ranges[2] - ranges[0])) == ranges[2]
+ && (ranges[1] & (ranges[2] - ranges[0])) == 0
&& is_powerof2(ranges[2] - ranges[0]))
{
+ SLJIT_ASSERT((ranges[0] & (ranges[2] - ranges[0])) == 0 && (ranges[2] & ranges[3] & (ranges[2] - ranges[0])) != 0);
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[0]);
if (ranges[2] + 1 != ranges[3])
{
@@ -4900,9 +4933,10 @@ else if ((cc[-1] & XCL_MAP) != 0)
if (!check_class_ranges(common, (const pcre_uint8 *)cc, FALSE, TRUE, list))
{
#ifdef COMPILE_PCRE8
- SLJIT_ASSERT(common->utf);
+ jump = NULL;
+ if (common->utf)
#endif
- jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
+ jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 3);
@@ -4911,7 +4945,10 @@ else if ((cc[-1] & XCL_MAP) != 0)
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
add_jump(compiler, list, JUMP(SLJIT_NOT_ZERO));
- JUMPHERE(jump);
+#ifdef COMPILE_PCRE8
+ if (common->utf)
+#endif
+ JUMPHERE(jump);
}
OP1(SLJIT_MOV, TMP1, 0, TMP3, 0);
@@ -5219,7 +5256,7 @@ while (*cc != XCL_END)
OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
SET_CHAR_OFFSET(0);
- OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xff);
+ OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x7f);
OP_FLAGS(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
SET_TYPE_OFFSET(ucp_Pc);
@@ -7665,6 +7702,10 @@ while (*cc != OP_KETRPOS)
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), STR_PTR, 0);
}
+ /* Even if the match is empty, we need to reset the control head. */
+ if (needs_control_head)
+ OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->control_head_ptr, SLJIT_MEM1(STACK_TOP), STACK(stack));
+
if (opcode == OP_SBRAPOS || opcode == OP_SCBRAPOS)
add_jump(compiler, &emptymatch, CMP(SLJIT_EQUAL, TMP1, 0, STR_PTR, 0));
@@ -7692,6 +7733,10 @@ while (*cc != OP_KETRPOS)
OP1(SLJIT_MOV, SLJIT_MEM1(TMP2), (framesize + 1) * sizeof(sljit_sw), STR_PTR, 0);
}
+ /* Even if the match is empty, we need to reset the control head. */
+ if (needs_control_head)
+ OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->control_head_ptr, SLJIT_MEM1(STACK_TOP), STACK(stack));
+
if (opcode == OP_SBRAPOS || opcode == OP_SCBRAPOS)
add_jump(compiler, &emptymatch, CMP(SLJIT_EQUAL, TMP1, 0, STR_PTR, 0));
@@ -7704,9 +7749,6 @@ while (*cc != OP_KETRPOS)
}
}
- if (needs_control_head)
- OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->control_head_ptr, SLJIT_MEM1(STACK_TOP), STACK(stack));
-
JUMPTO(SLJIT_JUMP, loop);
flush_stubs(common);
@@ -8441,8 +8483,7 @@ while (cc < ccend)
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(1), STR_PTR, 0);
}
BACKTRACK_AS(braminzero_backtrack)->matchingpath = LABEL();
- if (cc[1] > OP_ASSERTBACK_NOT)
- count_match(common);
+ count_match(common);
break;
case OP_ONCE:
@@ -9624,7 +9665,7 @@ static SLJIT_INLINE void compile_recurse
DEFINE_COMPILER;
pcre_uchar *cc = common->start + common->currententry->start;
pcre_uchar *ccbegin = cc + 1 + LINK_SIZE + (*cc == OP_BRA ? 0 : IMM2_SIZE);
-pcre_uchar *ccend = bracketend(cc);
+pcre_uchar *ccend = bracketend(cc) - (1 + LINK_SIZE);
BOOL needs_control_head;
int framesize = get_framesize(common, cc, NULL, TRUE, &needs_control_head);
int private_data_size = get_private_data_copy_length(common, ccbegin, ccend, needs_control_head);
@@ -9648,6 +9689,7 @@ set_jumps(common->currententry->calls, c
sljit_emit_fast_enter(compiler, TMP2, 0);
allocate_stack(common, private_data_size + framesize + alternativesize);
+count_match(common);
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(private_data_size + framesize + alternativesize - 1), TMP2, 0);
copy_private_data(common, ccbegin, ccend, TRUE, private_data_size + framesize + alternativesize, framesize + alternativesize, needs_control_head);
if (needs_control_head)
@@ -9992,6 +10034,7 @@ OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1)
OP1(SLJIT_MOV_UI, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, limit_match));
OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(struct sljit_stack, base));
OP1(SLJIT_MOV, STACK_LIMIT, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(struct sljit_stack, limit));
+OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LIMIT_MATCH, TMP1, 0);
if (mode == JIT_PARTIAL_SOFT_COMPILE)
Modified: tomcat/jk/trunk/native/iis/pcre/pcre_jit_test.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcre_jit_test.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcre_jit_test.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcre_jit_test.c Sun Jan 17 17:23:28 2016
@@ -182,6 +182,7 @@ static struct regression_test_case regre
{ CMUAP, 0, "\xf0\x90\x90\x80{2}", "\xf0\x90\x90\x80#\xf0\x90\x90\xa8\xf0\x90\x90\x80" },
{ CMUAP, 0, "\xf0\x90\x90\xa8{2}", "\xf0\x90\x90\x80#\xf0\x90\x90\xa8\xf0\x90\x90\x80" },
{ CMUAP, 0, "\xe1\xbd\xb8\xe1\xbf\xb8", "\xe1\xbf\xb8\xe1\xbd\xb8" },
+ { MA, 0, "[3-57-9]", "5" },
/* Assertions. */
{ MUA, 0, "\\b[^A]", "A_B#" },
Modified: tomcat/jk/trunk/native/iis/pcre/pcre_study.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcre_study.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcre_study.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcre_study.c Sun Jan 17 17:23:28 2016
@@ -71,6 +71,7 @@ Arguments:
startcode pointer to start of the whole pattern's code
options the compiling options
recurses chain of recurse_check to catch mutual recursion
+ countptr pointer to call count (to catch over complexity)
Returns: the minimum length
-1 if \C in UTF-8 mode or (*ACCEPT) was encountered
@@ -80,7 +81,8 @@ Returns: the minimum length
static int
find_minlength(const REAL_PCRE *re, const pcre_uchar *code,
- const pcre_uchar *startcode, int options, recurse_check *recurses)
+ const pcre_uchar *startcode, int options, recurse_check *recurses,
+ int *countptr)
{
int length = -1;
/* PCRE_UTF16 has the same value as PCRE_UTF8. */
@@ -90,6 +92,8 @@ recurse_check this_recurse;
register int branchlength = 0;
register pcre_uchar *cc = (pcre_uchar *)code + 1 + LINK_SIZE;
+if ((*countptr)++ > 1000) return -1; /* too complex */
+
if (*code == OP_CBRA || *code == OP_SCBRA ||
*code == OP_CBRAPOS || *code == OP_SCBRAPOS) cc += IMM2_SIZE;
@@ -131,7 +135,7 @@ for (;;)
case OP_SBRAPOS:
case OP_ONCE:
case OP_ONCE_NC:
- d = find_minlength(re, cc, startcode, options, recurses);
+ d = find_minlength(re, cc, startcode, options, recurses, countptr);
if (d < 0) return d;
branchlength += d;
do cc += GET(cc, 1); while (*cc == OP_ALT);
@@ -415,7 +419,8 @@ for (;;)
int dd;
this_recurse.prev = recurses;
this_recurse.group = cs;
- dd = find_minlength(re, cs, startcode, options, &this_recurse);
+ dd = find_minlength(re, cs, startcode, options, &this_recurse,
+ countptr);
if (dd < d) d = dd;
}
}
@@ -451,7 +456,8 @@ for (;;)
{
this_recurse.prev = recurses;
this_recurse.group = cs;
- d = find_minlength(re, cs, startcode, options, &this_recurse);
+ d = find_minlength(re, cs, startcode, options, &this_recurse,
+ countptr);
}
}
}
@@ -514,7 +520,7 @@ for (;;)
this_recurse.prev = recurses;
this_recurse.group = cs;
branchlength += find_minlength(re, cs, startcode, options,
- &this_recurse);
+ &this_recurse, countptr);
}
}
cc += 1 + LINK_SIZE;
@@ -1453,6 +1459,7 @@ pcre32_study(const pcre32 *external_re,
#endif
{
int min;
+int count = 0;
BOOL bits_set = FALSE;
pcre_uint8 start_bits[32];
PUBL(extra) *extra = NULL;
@@ -1539,7 +1546,7 @@ if ((re->options & PCRE_ANCHORED) == 0 &
/* Find the minimum length of subject string. */
-switch(min = find_minlength(re, code, code, re->options, NULL))
+switch(min = find_minlength(re, code, code, re->options, NULL, &count))
{
case -2: *errorptr = "internal error: missing capturing bracket"; return NULL;
case -3: *errorptr = "internal error: opcode not recognized"; return NULL;
Modified: tomcat/jk/trunk/native/iis/pcre/pcre_xclass.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcre_xclass.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcre_xclass.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcre_xclass.c Sun Jan 17 17:23:28 2016
@@ -246,7 +246,7 @@ while ((t = *data++) != XCL_END)
case PT_PXPUNCT:
if ((PRIV(ucp_gentype)[prop->chartype] == ucp_P ||
- (c < 256 && PRIV(ucp_gentype)[prop->chartype] == ucp_S)) == isprop)
+ (c < 128 && PRIV(ucp_gentype)[prop->chartype] == ucp_S)) == isprop)
return !negated;
break;
Modified: tomcat/jk/trunk/native/iis/pcre/pcregrep.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcregrep.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcregrep.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcregrep.c Sun Jan 17 17:23:28 2016
@@ -1692,9 +1692,13 @@ while (ptr < endptr)
if (filenames == FN_NOMATCH_ONLY) return 1;
+ /* If all we want is a yes/no answer, stop now. */
+
+ if (quiet) return 0;
+
/* Just count if just counting is wanted. */
- if (count_only) count++;
+ else if (count_only) count++;
/* When handling a binary file and binary-files==binary, the "binary"
variable will be set true (it's false in all other cases). In this
@@ -1715,10 +1719,6 @@ while (ptr < endptr)
return 0;
}
- /* Likewise, if all we want is a yes/no answer. */
-
- else if (quiet) return 0;
-
/* The --only-matching option prints just the substring that matched,
and/or one or more captured portions of it, as long as these strings are
not empty. The --file-offsets and --line-offsets options output offsets for
@@ -2089,7 +2089,7 @@ if (filenames == FN_NOMATCH_ONLY)
/* Print the match count if wanted */
-if (count_only)
+if (count_only && !quiet)
{
if (count > 0 || !omit_zero_count)
{
Modified: tomcat/jk/trunk/native/iis/pcre/pcretest.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/pcretest.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/pcretest.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/pcretest.c Sun Jan 17 17:23:28 2016
@@ -4621,9 +4621,9 @@ while (!done)
else switch ((c = *p++))
{
- case 'a': c = 7; break;
+ case 'a': c = CHAR_BEL; break;
case 'b': c = '\b'; break;
- case 'e': c = 27; break;
+ case 'e': c = CHAR_ESC; break;
case 'f': c = '\f'; break;
case 'n': c = '\n'; break;
case 'r': c = '\r'; break;
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitConfig.h
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitConfig.h?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitConfig.h (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitConfig.h Sun Jan 17 17:23:28 2016
@@ -96,6 +96,15 @@
#define SLJIT_EXECUTABLE_ALLOCATOR 1
#endif
+/* Force cdecl calling convention even if a better calling
+ convention (e.g. fastcall) is supported by the C compiler.
+ If this option is enabled, C functions without
+ SLJIT_CALL can also be called from JIT code. */
+#ifndef SLJIT_USE_CDECL_CALLING_CONVENTION
+/* Disabled by default */
+#define SLJIT_USE_CDECL_CALLING_CONVENTION 0
+#endif
+
/* Return with error when an invalid argument is passed. */
#ifndef SLJIT_ARGUMENT_CHECKS
/* Disabled by default */
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitConfigInternal.h
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitConfigInternal.h?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitConfigInternal.h (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitConfigInternal.h Sun Jan 17 17:23:28 2016
@@ -468,7 +468,12 @@ typedef double sljit_d;
#ifndef SLJIT_CALL
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+#if (defined SLJIT_USE_CDECL_CALLING_CONVENTION && SLJIT_USE_CDECL_CALLING_CONVENTION)
+
+/* Force cdecl. */
+#define SLJIT_CALL
+
+#elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
#if defined(__GNUC__) && !defined(__APPLE__)
@@ -608,6 +613,12 @@ SLJIT_API_FUNC_ATTRIBUTE void sljit_free
#define SLJIT_LOCALS_OFFSET_BASE ((23 + 1) * sizeof(sljit_sw))
#endif
+#elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
+
+#define SLJIT_NUMBER_OF_REGISTERS 10
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 5
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
#define SLJIT_NUMBER_OF_REGISTERS 0
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitLir.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitLir.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitLir.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitLir.c Sun Jan 17 17:23:28 2016
@@ -845,8 +845,8 @@ SLJIT_API_FUNC_ATTRIBUTE void sljit_comp
}
static SLJIT_CONST char* op0_names[] = {
- (char*)"breakpoint", (char*)"nop",
- (char*)"lumul", (char*)"lsmul", (char*)"ludiv", (char*)"lsdiv",
+ (char*)"breakpoint", (char*)"nop", (char*)"lumul", (char*)"lsmul",
+ (char*)"udivmod", (char*)"sdivmod", (char*)"udivi", (char*)"sdivi"
};
static SLJIT_CONST char* op1_names[] = {
@@ -1036,7 +1036,7 @@ static SLJIT_INLINE CHECK_RETURN_TYPE ch
{
#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
CHECK_ARGUMENT((op >= SLJIT_BREAKPOINT && op <= SLJIT_LSMUL)
- || ((op & ~SLJIT_INT_OP) >= SLJIT_LUDIV && (op & ~SLJIT_INT_OP) <= SLJIT_LSDIV));
+ || ((op & ~SLJIT_INT_OP) >= SLJIT_UDIVMOD && (op & ~SLJIT_INT_OP) <= SLJIT_SDIVI));
CHECK_ARGUMENT(op < SLJIT_LUMUL || compiler->scratches >= 2);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -1447,6 +1447,8 @@ static SLJIT_INLINE CHECK_RETURN_TYPE ch
static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset)
{
+ SLJIT_UNUSED_ARG(offset);
+
#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
FUNCTION_CHECK_DST(dst, dstw);
#endif
@@ -1462,6 +1464,8 @@ static SLJIT_INLINE CHECK_RETURN_TYPE ch
static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value)
{
+ SLJIT_UNUSED_ARG(init_value);
+
#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
FUNCTION_CHECK_DST(dst, dstw);
#endif
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitLir.h
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitLir.h?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitLir.h (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitLir.h Sun Jan 17 17:23:28 2016
@@ -687,7 +687,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
#define SLJIT_OP0_BASE 0
/* Flags: - (never set any flags)
- Note: breakpoint instruction is not supported by all architectures (namely ppc)
+ Note: breakpoint instruction is not supported by all architectures (e.g. ppc)
It falls back to SLJIT_NOP in those cases. */
#define SLJIT_BREAKPOINT (SLJIT_OP0_BASE + 0)
/* Flags: - (never set any flags)
@@ -696,24 +696,42 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
#define SLJIT_NOP (SLJIT_OP0_BASE + 1)
/* Flags: - (may destroy flags)
Unsigned multiplication of SLJIT_R0 and SLJIT_R1.
- Result goes to SLJIT_R1:SLJIT_R0 (high:low) word */
+ Result is placed into SLJIT_R1:SLJIT_R0 (high:low) word */
#define SLJIT_LUMUL (SLJIT_OP0_BASE + 2)
/* Flags: - (may destroy flags)
Signed multiplication of SLJIT_R0 and SLJIT_R1.
- Result goes to SLJIT_R1:SLJIT_R0 (high:low) word */
+ Result is placed into SLJIT_R1:SLJIT_R0 (high:low) word */
#define SLJIT_LSMUL (SLJIT_OP0_BASE + 3)
/* Flags: I - (may destroy flags)
Unsigned divide of the value in SLJIT_R0 by the value in SLJIT_R1.
- The result is placed in SLJIT_R0 and the remainder goes to SLJIT_R1.
- Note: if SLJIT_R1 contains 0, the behaviour is undefined. */
-#define SLJIT_LUDIV (SLJIT_OP0_BASE + 4)
-#define SLJIT_ILUDIV (SLJIT_LUDIV | SLJIT_INT_OP)
+ The result is placed into SLJIT_R0 and the remainder into SLJIT_R1.
+ Note: if SLJIT_R1 is 0, the behaviour is undefined. */
+#define SLJIT_UDIVMOD (SLJIT_OP0_BASE + 4)
+#define SLJIT_IUDIVMOD (SLJIT_UDIVMOD | SLJIT_INT_OP)
/* Flags: I - (may destroy flags)
Signed divide of the value in SLJIT_R0 by the value in SLJIT_R1.
- The result is placed in SLJIT_R0 and the remainder goes to SLJIT_R1.
- Note: if SLJIT_R1 contains 0, the behaviour is undefined. */
-#define SLJIT_LSDIV (SLJIT_OP0_BASE + 5)
-#define SLJIT_ILSDIV (SLJIT_LSDIV | SLJIT_INT_OP)
+ The result is placed into SLJIT_R0 and the remainder into SLJIT_R1.
+ Note: if SLJIT_R1 is 0, the behaviour is undefined.
+ Note: if SLJIT_R1 is -1 and SLJIT_R0 is integer min (0x800..00),
+ the behaviour is undefined. */
+#define SLJIT_SDIVMOD (SLJIT_OP0_BASE + 5)
+#define SLJIT_ISDIVMOD (SLJIT_SDIVMOD | SLJIT_INT_OP)
+/* Flags: I - (may destroy flags)
+ Unsigned divide of the value in SLJIT_R0 by the value in SLJIT_R1.
+ The result is placed into SLJIT_R0. SLJIT_R1 preserves its value.
+ Note: if SLJIT_R1 is 0, the behaviour is undefined.
+ Note: SLJIT_SDIV is single precision divide. */
+#define SLJIT_UDIVI (SLJIT_OP0_BASE + 6)
+#define SLJIT_IUDIVI (SLJIT_UDIVI | SLJIT_INT_OP)
+/* Flags: I - (may destroy flags)
+ Signed divide of the value in SLJIT_R0 by the value in SLJIT_R1.
+ The result is placed into SLJIT_R0. SLJIT_R1 preserves its value.
+ Note: if SLJIT_R1 is 0, the behaviour is undefined.
+ Note: if SLJIT_R1 is -1 and SLJIT_R0 is integer min (0x800..00),
+ the behaviour is undefined.
+ Note: SLJIT_SDIV is single precision divide. */
+#define SLJIT_SDIVI (SLJIT_OP0_BASE + 7)
+#define SLJIT_ISDIVI (SLJIT_SDIVI | SLJIT_INT_OP)
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op);
@@ -851,34 +869,6 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
sljit_si src1, sljit_sw src1w,
sljit_si src2, sljit_sw src2w);
-/* The following function is a helper function for sljit_emit_op_custom.
- It returns with the real machine register index ( >=0 ) of any SLJIT_R,
- SLJIT_S and SLJIT_SP registers.
-
- Note: it returns with -1 for virtual registers (only on x86-32). */
-
-SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg);
-
-/* The following function is a helper function for sljit_emit_op_custom.
- It returns with the real machine register index of any SLJIT_FLOAT register.
-
- Note: the index is always an even number on ARM (except ARM-64), MIPS, and SPARC. */
-
-SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg);
-
-/* Any instruction can be inserted into the instruction stream by
- sljit_emit_op_custom. It has a similar purpose as inline assembly.
- The size parameter must match to the instruction size of the target
- architecture:
-
- x86: 0 < size <= 15. The instruction argument can be byte aligned.
- Thumb2: if size == 2, the instruction argument must be 2 byte aligned.
- if size == 4, the instruction argument must be 4 byte aligned.
- Otherwise: size must be 4 and instruction argument must be 4 byte aligned. */
-
-SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_custom(struct sljit_compiler *compiler,
- void *instruction, sljit_si size);
-
/* Returns with non-zero if fpu is available. */
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void);
@@ -1196,4 +1186,64 @@ SLJIT_API_FUNC_ATTRIBUTE void sljit_set_
#endif /* !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL) */
+/* --------------------------------------------------------------------- */
+/* CPU specific functions */
+/* --------------------------------------------------------------------- */
+
+/* The following function is a helper function for sljit_emit_op_custom.
+ It returns with the real machine register index ( >=0 ) of any SLJIT_R,
+ SLJIT_S and SLJIT_SP registers.
+
+ Note: it returns with -1 for virtual registers (only on x86-32). */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg);
+
+/* The following function is a helper function for sljit_emit_op_custom.
+ It returns with the real machine register index of any SLJIT_FLOAT register.
+
+ Note: the index is always an even number on ARM (except ARM-64), MIPS, and SPARC. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg);
+
+/* Any instruction can be inserted into the instruction stream by
+ sljit_emit_op_custom. It has a similar purpose as inline assembly.
+ The size parameter must match to the instruction size of the target
+ architecture:
+
+ x86: 0 < size <= 15. The instruction argument can be byte aligned.
+ Thumb2: if size == 2, the instruction argument must be 2 byte aligned.
+ if size == 4, the instruction argument must be 4 byte aligned.
+ Otherwise: size must be 4 and instruction argument must be 4 byte aligned. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_custom(struct sljit_compiler *compiler,
+ void *instruction, sljit_si size);
+
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
+
+/* Returns with non-zero if sse2 is available. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_x86_is_sse2_available(void);
+
+/* Returns with non-zero if cmov instruction is available. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_x86_is_cmov_available(void);
+
+/* Emit a conditional mov instruction on x86 CPUs. This instruction
+ moves src to destination, if the condition is satisfied. Unlike
+ other arithmetic instructions, destination must be a register.
+ Before such instructions are emitted, cmov support should be
+ checked by sljit_x86_is_cmov_available function.
+ type must be between SLJIT_EQUAL and SLJIT_S_ORDERED
+ dst_reg must be a valid register and it can be combined
+ with SLJIT_INT_OP to perform 32 bit arithmetic
+ Flags: I - (never set any flags)
+ */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_x86_emit_cmov(struct sljit_compiler *compiler,
+ sljit_si type,
+ sljit_si dst_reg,
+ sljit_si src, sljit_sw srcw);
+
+#endif
+
#endif /* _SLJIT_LIR_H_ */
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_32.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_32.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_32.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_32.c Sun Jan 17 17:23:28 2016
@@ -1833,18 +1833,33 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
| (reg_map[SLJIT_R0] << 8)
| reg_map[TMP_REG1]);
#endif
- case SLJIT_LUDIV:
- case SLJIT_LSDIV:
- if (compiler->scratches >= 3)
+ case SLJIT_UDIVMOD:
+ case SLJIT_SDIVMOD:
+ case SLJIT_UDIVI:
+ case SLJIT_SDIVI:
+ SLJIT_COMPILE_ASSERT((SLJIT_UDIVMOD & 0x2) == 0 && SLJIT_UDIVI - 0x2 == SLJIT_UDIVMOD, bad_div_opcode_assignments);
+ SLJIT_COMPILE_ASSERT(reg_map[2] == 1 && reg_map[3] == 2, bad_register_mapping);
+
+ if ((op >= SLJIT_UDIVI) && (compiler->scratches >= 3)) {
FAIL_IF(push_inst(compiler, 0xe52d2008 /* str r2, [sp, #-8]! */));
+ FAIL_IF(push_inst(compiler, 0xe58d1004 /* str r1, [sp, #4] */));
+ }
+ else if ((op >= SLJIT_UDIVI) || (compiler->scratches >= 3))
+ FAIL_IF(push_inst(compiler, 0xe52d0008 | (op >= SLJIT_UDIVI ? 0x1000 : 0x2000) /* str r1/r2, [sp, #-8]! */));
+
#if defined(__GNUC__)
FAIL_IF(sljit_emit_ijump(compiler, SLJIT_FAST_CALL, SLJIT_IMM,
- (op == SLJIT_LUDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
+ ((op | 0x2) == SLJIT_UDIVI ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
#else
#error "Software divmod functions are needed"
#endif
- if (compiler->scratches >= 3)
- return push_inst(compiler, 0xe49d2008 /* ldr r2, [sp], #8 */);
+
+ if ((op >= SLJIT_UDIVI) && (compiler->scratches >= 3)) {
+ FAIL_IF(push_inst(compiler, 0xe59d1004 /* ldr r1, [sp, #4] */));
+ FAIL_IF(push_inst(compiler, 0xe49d2008 /* ldr r2, [sp], #8 */));
+ }
+ else if ((op >= SLJIT_UDIVI) || (compiler->scratches >= 3))
+ return push_inst(compiler, 0xe49d0008 | (op >= SLJIT_UDIVI ? 0x1000 : 0x2000) /* ldr r1/r2, [sp], #8 */);
return SLJIT_SUCCESS;
}
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_64.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_64.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_64.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_64.c Sun Jan 17 17:23:28 2016
@@ -1087,14 +1087,20 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
saved_regs_size += sizeof(sljit_sw);
}
local_size -= saved_regs_size + SLJIT_LOCALS_OFFSET;
- FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | (saved_regs_size << 10)));
+ if (saved_regs_size > 0)
+ FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | (saved_regs_size << 10)));
}
tmp = saveds < SLJIT_NUMBER_OF_SAVED_REGISTERS ? (SLJIT_S0 + 1 - saveds) : SLJIT_FIRST_SAVED_REG;
prev = -1;
for (i = SLJIT_S0; i >= tmp; i--) {
if (prev == -1) {
- prev = i;
+ if (!(offs & (1 << 15))) {
+ prev = i;
+ continue;
+ }
+ FAIL_IF(push_inst(compiler, STRI | RT(i) | RN(TMP_SP) | (offs >> 5)));
+ offs += 1 << 15;
continue;
}
FAIL_IF(push_inst(compiler, STP | RT(prev) | RT2(i) | RN(TMP_SP) | offs));
@@ -1104,7 +1110,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
for (i = scratches; i >= SLJIT_FIRST_SAVED_REG; i--) {
if (prev == -1) {
- prev = i;
+ if (!(offs & (1 << 15))) {
+ prev = i;
+ continue;
+ }
+ FAIL_IF(push_inst(compiler, STRI | RT(i) | RN(TMP_SP) | (offs >> 5)));
+ offs += 1 << 15;
continue;
}
FAIL_IF(push_inst(compiler, STP | RT(prev) | RT2(i) | RN(TMP_SP) | offs));
@@ -1112,8 +1123,7 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
prev = -1;
}
- if (prev != -1)
- FAIL_IF(push_inst(compiler, STRI | RT(prev) | RN(TMP_SP) | (offs >> 5)));
+ SLJIT_ASSERT(prev == -1);
if (compiler->local_size > (63 * sizeof(sljit_sw))) {
/* The local_size is already adjusted by the saved registers. */
@@ -1188,7 +1198,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
prev = -1;
for (i = SLJIT_S0; i >= tmp; i--) {
if (prev == -1) {
- prev = i;
+ if (!(offs & (1 << 15))) {
+ prev = i;
+ continue;
+ }
+ FAIL_IF(push_inst(compiler, LDRI | RT(i) | RN(TMP_SP) | (offs >> 5)));
+ offs += 1 << 15;
continue;
}
FAIL_IF(push_inst(compiler, LDP | RT(prev) | RT2(i) | RN(TMP_SP) | offs));
@@ -1198,7 +1213,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
for (i = compiler->scratches; i >= SLJIT_FIRST_SAVED_REG; i--) {
if (prev == -1) {
- prev = i;
+ if (!(offs & (1 << 15))) {
+ prev = i;
+ continue;
+ }
+ FAIL_IF(push_inst(compiler, LDRI | RT(i) | RN(TMP_SP) | (offs >> 5)));
+ offs += 1 << 15;
continue;
}
FAIL_IF(push_inst(compiler, LDP | RT(prev) | RT2(i) | RN(TMP_SP) | offs));
@@ -1206,13 +1226,12 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
prev = -1;
}
- if (prev != -1)
- FAIL_IF(push_inst(compiler, LDRI | RT(prev) | RN(TMP_SP) | (offs >> 5)));
+ SLJIT_ASSERT(prev == -1);
if (compiler->local_size <= (63 * sizeof(sljit_sw))) {
FAIL_IF(push_inst(compiler, LDP_PST | 29 | RT2(TMP_LR)
| RN(TMP_SP) | (((local_size >> 3) & 0x7f) << 15)));
- } else {
+ } else if (saved_regs_size > 0) {
FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | (saved_regs_size << 10)));
}
@@ -1242,12 +1261,15 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
FAIL_IF(push_inst(compiler, ORR | RD(TMP_REG1) | RN(TMP_ZERO) | RM(SLJIT_R0)));
FAIL_IF(push_inst(compiler, MADD | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1) | RT2(TMP_ZERO)));
return push_inst(compiler, (op == SLJIT_LUMUL ? UMULH : SMULH) | RD(SLJIT_R1) | RN(TMP_REG1) | RM(SLJIT_R1));
- case SLJIT_LUDIV:
- case SLJIT_LSDIV:
+ case SLJIT_UDIVMOD:
+ case SLJIT_SDIVMOD:
FAIL_IF(push_inst(compiler, (ORR ^ inv_bits) | RD(TMP_REG1) | RN(TMP_ZERO) | RM(SLJIT_R0)));
- FAIL_IF(push_inst(compiler, ((op == SLJIT_LUDIV ? UDIV : SDIV) ^ inv_bits) | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1)));
+ FAIL_IF(push_inst(compiler, ((op == SLJIT_UDIVMOD ? UDIV : SDIV) ^ inv_bits) | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1)));
FAIL_IF(push_inst(compiler, (MADD ^ inv_bits) | RD(SLJIT_R1) | RN(SLJIT_R0) | RM(SLJIT_R1) | RT2(TMP_ZERO)));
return push_inst(compiler, (SUB ^ inv_bits) | RD(SLJIT_R1) | RN(TMP_REG1) | RM(SLJIT_R1));
+ case SLJIT_UDIVI:
+ case SLJIT_SDIVI:
+ return push_inst(compiler, ((op == SLJIT_UDIVI ? UDIV : SDIV) ^ inv_bits) | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1));
}
return SLJIT_SUCCESS;
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_T2_32.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_T2_32.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_T2_32.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeARM_T2_32.c Sun Jan 17 17:23:28 2016
@@ -1239,6 +1239,9 @@ extern int __aeabi_idivmod(int numerator
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
{
+ sljit_sw saved_reg_list[3];
+ sljit_sw saved_reg_count;
+
CHECK_ERROR();
CHECK(check_sljit_emit_op0(compiler, op));
@@ -1255,24 +1258,53 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
| (reg_map[SLJIT_R0] << 12)
| (reg_map[SLJIT_R0] << 16)
| reg_map[SLJIT_R1]);
- case SLJIT_LUDIV:
- case SLJIT_LSDIV:
- if (compiler->scratches >= 4) {
- FAIL_IF(push_inst32(compiler, 0xf84d2d04 /* str r2, [sp, #-4]! */));
- FAIL_IF(push_inst32(compiler, 0xf84dcd04 /* str ip, [sp, #-4]! */));
- } else if (compiler->scratches >= 3)
- FAIL_IF(push_inst32(compiler, 0xf84d2d08 /* str r2, [sp, #-8]! */));
+ case SLJIT_UDIVMOD:
+ case SLJIT_SDIVMOD:
+ case SLJIT_UDIVI:
+ case SLJIT_SDIVI:
+ SLJIT_COMPILE_ASSERT((SLJIT_UDIVMOD & 0x2) == 0 && SLJIT_UDIVI - 0x2 == SLJIT_UDIVMOD, bad_div_opcode_assignments);
+ SLJIT_COMPILE_ASSERT(reg_map[2] == 1 && reg_map[3] == 2 && reg_map[4] == 12, bad_register_mapping);
+
+ saved_reg_count = 0;
+ if (compiler->scratches >= 4)
+ saved_reg_list[saved_reg_count++] = 12;
+ if (compiler->scratches >= 3)
+ saved_reg_list[saved_reg_count++] = 2;
+ if (op >= SLJIT_UDIVI)
+ saved_reg_list[saved_reg_count++] = 1;
+
+ if (saved_reg_count > 0) {
+ FAIL_IF(push_inst32(compiler, 0xf84d0d00 | (saved_reg_count >= 3 ? 16 : 8)
+ | (saved_reg_list[0] << 12) /* str rX, [sp, #-8/-16]! */));
+ if (saved_reg_count >= 2) {
+ SLJIT_ASSERT(saved_reg_list[1] < 8);
+ FAIL_IF(push_inst16(compiler, 0x9001 | (saved_reg_list[1] << 8) /* str rX, [sp, #4] */));
+ }
+ if (saved_reg_count >= 3) {
+ SLJIT_ASSERT(saved_reg_list[2] < 8);
+ FAIL_IF(push_inst16(compiler, 0x9002 | (saved_reg_list[2] << 8) /* str rX, [sp, #8] */));
+ }
+ }
+
#if defined(__GNUC__)
FAIL_IF(sljit_emit_ijump(compiler, SLJIT_FAST_CALL, SLJIT_IMM,
- (op == SLJIT_LUDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
+ ((op | 0x2) == SLJIT_UDIVI ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
#else
#error "Software divmod functions are needed"
#endif
- if (compiler->scratches >= 4) {
- FAIL_IF(push_inst32(compiler, 0xf85dcb04 /* ldr ip, [sp], #4 */));
- return push_inst32(compiler, 0xf85d2b04 /* ldr r2, [sp], #4 */);
- } else if (compiler->scratches >= 3)
- return push_inst32(compiler, 0xf85d2b08 /* ldr r2, [sp], #8 */);
+
+ if (saved_reg_count > 0) {
+ if (saved_reg_count >= 3) {
+ SLJIT_ASSERT(saved_reg_list[2] < 8);
+ FAIL_IF(push_inst16(compiler, 0x9802 | (saved_reg_list[2] << 8) /* ldr rX, [sp, #8] */));
+ }
+ if (saved_reg_count >= 2) {
+ SLJIT_ASSERT(saved_reg_list[1] < 8);
+ FAIL_IF(push_inst16(compiler, 0x9801 | (saved_reg_list[1] << 8) /* ldr rX, [sp, #4] */));
+ }
+ return push_inst32(compiler, 0xf85d0b00 | (saved_reg_count >= 3 ? 16 : 8)
+ | (saved_reg_list[0] << 12) /* ldr rX, [sp], #8/16 */);
+ }
return SLJIT_SUCCESS;
}
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeMIPS_common.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeMIPS_common.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeMIPS_common.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeMIPS_common.c Sun Jan 17 17:23:28 2016
@@ -1053,8 +1053,11 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
#endif
FAIL_IF(push_inst(compiler, MFLO | D(SLJIT_R0), DR(SLJIT_R0)));
return push_inst(compiler, MFHI | D(SLJIT_R1), DR(SLJIT_R1));
- case SLJIT_LUDIV:
- case SLJIT_LSDIV:
+ case SLJIT_UDIVMOD:
+ case SLJIT_SDIVMOD:
+ case SLJIT_UDIVI:
+ case SLJIT_SDIVI:
+ SLJIT_COMPILE_ASSERT((SLJIT_UDIVMOD & 0x2) == 0 && SLJIT_UDIVI - 0x2 == SLJIT_UDIVMOD, bad_div_opcode_assignments);
#if !(defined SLJIT_MIPS_R1 && SLJIT_MIPS_R1)
FAIL_IF(push_inst(compiler, NOP, UNMOVABLE_INS));
FAIL_IF(push_inst(compiler, NOP, UNMOVABLE_INS));
@@ -1062,15 +1065,15 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
if (int_op)
- FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+ FAIL_IF(push_inst(compiler, ((op | 0x2) == SLJIT_UDIVI ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
else
- FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DDIVU : DDIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+ FAIL_IF(push_inst(compiler, ((op | 0x2) == SLJIT_UDIVI ? DDIVU : DDIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
#else
- FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+ FAIL_IF(push_inst(compiler, ((op | 0x2) == SLJIT_UDIVI ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
#endif
FAIL_IF(push_inst(compiler, MFLO | D(SLJIT_R0), DR(SLJIT_R0)));
- return push_inst(compiler, MFHI | D(SLJIT_R1), DR(SLJIT_R1));
+ return (op >= SLJIT_UDIVI) ? SLJIT_SUCCESS : push_inst(compiler, MFHI | D(SLJIT_R1), DR(SLJIT_R1));
}
return SLJIT_SUCCESS;
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativePPC_common.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativePPC_common.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativePPC_common.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativePPC_common.c Sun Jan 17 17:23:28 2016
@@ -1267,22 +1267,23 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
return push_inst(compiler, (op == SLJIT_LUMUL ? MULHWU : MULHW) | D(SLJIT_R1) | A(TMP_REG1) | B(SLJIT_R1));
#endif
- case SLJIT_LUDIV:
- case SLJIT_LSDIV:
+ case SLJIT_UDIVMOD:
+ case SLJIT_SDIVMOD:
FAIL_IF(push_inst(compiler, OR | S(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R0)));
#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
- if (int_op) {
- FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
- FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
- } else {
- FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVDU : DIVD) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
- FAIL_IF(push_inst(compiler, MULLD | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
- }
- return push_inst(compiler, SUBF | D(SLJIT_R1) | A(SLJIT_R1) | B(TMP_REG1));
+ FAIL_IF(push_inst(compiler, (int_op ? (op == SLJIT_UDIVMOD ? DIVWU : DIVW) : (op == SLJIT_UDIVMOD ? DIVDU : DIVD)) | D(SLJIT_R0) | A(SLJIT_R0) | B(SLJIT_R1)));
+ FAIL_IF(push_inst(compiler, (int_op ? MULLW : MULLD) | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
#else
- FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_UDIVMOD ? DIVWU : DIVW) | D(SLJIT_R0) | A(SLJIT_R0) | B(SLJIT_R1)));
FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
+#endif
return push_inst(compiler, SUBF | D(SLJIT_R1) | A(SLJIT_R1) | B(TMP_REG1));
+ case SLJIT_UDIVI:
+ case SLJIT_SDIVI:
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+ return push_inst(compiler, (int_op ? (op == SLJIT_UDIVI ? DIVWU : DIVW) : (op == SLJIT_UDIVI ? DIVDU : DIVD)) | D(SLJIT_R0) | A(SLJIT_R0) | B(SLJIT_R1));
+#else
+ return push_inst(compiler, (op == SLJIT_UDIVI ? DIVWU : DIVW) | D(SLJIT_R0) | A(SLJIT_R0) | B(SLJIT_R1));
#endif
}
Modified: tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeSPARC_common.c
URL: http://svn.apache.org/viewvc/tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeSPARC_common.c?rev=1725105&r1=1725104&r2=1725105&view=diff
==============================================================================
--- tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeSPARC_common.c (original)
+++ tomcat/jk/trunk/native/iis/pcre/sljit/sljitNativeSPARC_common.c Sun Jan 17 17:23:28 2016
@@ -777,20 +777,25 @@ SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_
#else
#error "Implementation required"
#endif
- case SLJIT_LUDIV:
- case SLJIT_LSDIV:
+ case SLJIT_UDIVMOD:
+ case SLJIT_SDIVMOD:
+ case SLJIT_UDIVI:
+ case SLJIT_SDIVI:
+ SLJIT_COMPILE_ASSERT((SLJIT_UDIVMOD & 0x2) == 0 && SLJIT_UDIVI - 0x2 == SLJIT_UDIVMOD, bad_div_opcode_assignments);
#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
- if (op == SLJIT_LUDIV)
+ if ((op | 0x2) == SLJIT_UDIVI)
FAIL_IF(push_inst(compiler, WRY | S1(0), MOVABLE_INS));
else {
FAIL_IF(push_inst(compiler, SRA | D(TMP_REG1) | S1(SLJIT_R0) | IMM(31), DR(TMP_REG1)));
FAIL_IF(push_inst(compiler, WRY | S1(TMP_REG1), MOVABLE_INS));
}
- FAIL_IF(push_inst(compiler, OR | D(TMP_REG2) | S1(0) | S2(SLJIT_R0), DR(TMP_REG2)));
- FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? UDIV : SDIV) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
+ if (op <= SLJIT_SDIVMOD)
+ FAIL_IF(push_inst(compiler, OR | D(TMP_REG2) | S1(0) | S2(SLJIT_R0), DR(TMP_REG2)));
+ FAIL_IF(push_inst(compiler, ((op | 0x2) == SLJIT_UDIVI ? UDIV : SDIV) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
+ if (op >= SLJIT_UDIVI)
+ return SLJIT_SUCCESS;
FAIL_IF(push_inst(compiler, SMUL | D(SLJIT_R1) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R1)));
- FAIL_IF(push_inst(compiler, SUB | D(SLJIT_R1) | S1(TMP_REG2) | S2(SLJIT_R1), DR(SLJIT_R1)));
- return SLJIT_SUCCESS;
+ return push_inst(compiler, SUB | D(SLJIT_R1) | S1(TMP_REG2) | S2(SLJIT_R1), DR(SLJIT_R1));
#else
#error "Implementation required"
#endif
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@tomcat.apache.org
For additional commands, e-mail: dev-help@tomcat.apache.org