You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@pdfbox.apache.org by Kevin Ternes <KT...@thegeneral.com> on 2015/09/12 00:08:05 UTC
RE: How flatten without changing appearance
Maruan,
That would be great. Please have a look at:
https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!AKE0x0fh5QDkIIw&ithint=file%2czip
This should demonstrate the problem by processing several files.
The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
My flatten is done by the PDFBoxUtils.flatten() method.
Thanks,
-Kevin
-----Original Message-----
From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
Sent: Friday, September 11, 2015 12:17 PM
To: users@pdfbox.apache.org
Subject: Re: How to merge forms where there is
how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
BR
Maruan
> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>
> I have not been able to successfully flatten a document without affecting the formatting of the field.
> There are some example codes out there but none of them work correctly for me.
>
> -----Original Message-----
> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
> Sent: Friday, September 11, 2015 3:15 AM
> To: users@pdfbox.apache.org
> Subject: Re: How to merge forms where there is
>
> Hi Kevin
> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>
>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>
> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>
> BR
> Maruan
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
Re: How flatten without changing appearance
Posted by Maruan Sahyoun <sa...@fileaffairs.de>.
Hi Kevin,
> Am 21.09.2015 um 20:37 schrieb Kevin Ternes <KT...@thegeneral.com>:
>
> Maruan,
>
> I finally got back around to trying this new flatten method out. It works fantastic as far as preserving the appearance of the fields.
> However, if I flatten before a merge, I am still losing data entered into fields.
could you be a little more specific? Do you have a sample form? Is the data visible before the form is flattened, in which application?
BR
Maruan
>
>
> -----Original Message-----
> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
> Sent: Tuesday, September 15, 2015 4:15 AM
> To: users@pdfbox.apache.org
> Subject: Re: How flatten without changing appearance
>
> Hi,
>> Am 15.09.2015 um 09:06 schrieb Tilman Hausherr <TH...@t-online.de>:
>>
>> Am 15.09.2015 um 09:02 schrieb Maruan Sahyoun:
>>>> Am 15.09.2015 um 08:56 schrieb Tilman Hausherr <TH...@t-online.de>:
>>>>
>>>> Am 15.09.2015 um 08:48 schrieb Maruan Sahyoun:
>>>>> Hi Tilman,
>>>>>
>>>>>> Am 15.09.2015 um 08:17 schrieb Tilman Hausherr <TH...@t-online.de>:
>>>>>>
>>>>>> Am 15.09.2015 um 04:47 schrieb Maruan Sahyoun:
>>>>>>> Hi Kevin,
>>>>>>>
>>>>>>> I've created https://issues.apache.org/jira/browse/PDFBOX-2970 <https://issues.apache.org/jira/browse/PDFBOX-2970> for that.
>>>>>>>
>>>>>>> In addition you can start playing with that code based on the current PDFBox 2.0.0 snapshot.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> PDDocument doc = PDDocument.load(new File(...));
>>>>>>> PDAcroForm acroForm = doc.getDocumentCatalog().getAcroForm();
>>>>>>> // Iterate over all form fields and their widgets and create a
>>>>>>> // FormXObject at the page content level from that
>>>>>>> for (PDField field : acroForm.getFieldTree())
>>>>>>> {
>>>>>>> for (PDAnnotationWidget widget : ((PDTerminalField)field).getWidgets())
>>>>>>> {
>>>>>>> PDPage page = widget.getPage();
>>>>>>> PDPageContentStream contentStream = new
>>>>>>> PDPageContentStream(doc, page, true, true);
>>>>>> I wasn't 100% sure what was meant with "flatten", but now I get it!
>>>>>>
>>>>>> I think the first one of the "new PDPageContentStream" should have the fifth parameter and be true, in case the existing content stream isn't included in q...Q.
>>>>> thanks for stepping in.
>>>>>
>>>>> Is that really needed as we are storing/restoring the current state before the new content is added. Putting a store/restore around the existing one - assuming there is only one - would store/restore to the state before there was any content stream. In addition if there are already multiple streams before the new one would we need to put a store/restore around each of them? If there wasn't any that would potentially change the behavior of the old processing?
>>>> The constructor identifies if there is already content, and only then, it inserts a saveGraphicsState() before the first existing stream and a restoreGraphicsState() at the end of the new one, so it work both with none, one, and many.
>>>>
>>>> Only doing it for the first one is to avoid having too many nesting
>>>> q...Q
>>> looking at how Adobe does it each of the new content streams is wrapped in a q ...Q - that's why I did the same.
>>
>> That isn't what I meant. I meant that only the first one should be
>>
>> PDPageContentStream contentStream = new PDPageContentStream(doc, page,
>> true, true, true);
>>
>> instead of
>>
>> PDPageContentStream contentStream = new PDPageContentStream(doc, page,
>> true, true);
>>
>> all the rest is fine as it is.
>>
>
> done - thanks for the clarification.
> Maruan
>
>>
>> Tilman
>>
>>
>>
>>>
>>>> What I was thinking of is cases where the existing content stream(s) modifies the CTM without resetting it. This would have the effect that the "fields" would appear at the wrong place / wrong size / outside of the screen. We're having this every few months that somebody wants to add a stamp to a page, it works for most, except for one "special" file.
>>>>
>>>> Tilman
>>>>
>>>>
>>>>> BR
>>>>> Maruan
>>>>>
>>>>>
>>>>>
>>>>>> Tilman
>>>>>>
>>>>>>> PDFormXObject fieldObject = new PDFormXObject(widget.getAppearance().getNormalAppearance().getAppearanceStream().getCOSStream());
>>>>>>> Matrix translationMatrix = Matrix.getTranslateInstance(widget.getRectangle().getLowerLeftX(), widget.getRectangle().getLowerLeftY());
>>>>>>> contentStream.saveGraphicsState();
>>>>>>> contentStream.transform(translationMatrix);
>>>>>>> contentStream.drawForm(fieldObject);
>>>>>>> contentStream.restoreGraphicsState();
>>>>>>> contentStream.close();
>>>>>>> }
>>>>>>> }
>>>>>>>
>>>>>>> // preserve all non widget annotations
>>>>>>> for (PDPage page : doc.getPages())
>>>>>>> {
>>>>>>> List<PDAnnotation> annotations = new ArrayList<PDAnnotation>();
>>>>>>> for (PDAnnotation annotation: page.getAnnotations())
>>>>>>> {
>>>>>>> if (!(annotation instanceof PDAnnotationWidget))
>>>>>>> {
>>>>>>> annotations.add(annotation);
>>>>>>> }
>>>>>>> }
>>>>>>> page.setAnnotations(annotations);
>>>>>>> }
>>>>>>> // remove the fields
>>>>>>> acroForm.setFields(Collections.<PDField>emptyList());
>>>>>>> doc.save(...);
>>>>>>> doc.close();
>>>>>>>
>>>>>>>
>>>>>>> BR
>>>>>>> Maruan
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Am 14.09.2015 um 17:57 schrieb Maruan Sahyoun <sa...@fileaffairs.de>:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>>
>>>>>>>>> I am trying to refactor for 2.0.0-SNAPSHOT now.
>>>>>>>>>
>>>>>>>>> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
>>>>>>>>> All the examples seem to pertain to v1.x
>>>>>>>> there are non but I've started to get that into the project
>>>>>>>>
>>>>>>>>> -----Original Message-----
>>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>>> Sent: Saturday, September 12, 2015 1:55 AM
>>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>>> Subject: Re: How flatten without changing appearance
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>>>
>>>>>>>>>> Maruan,
>>>>>>>>>> That would be great. Please have a look at:
>>>>>>>>>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&au
>>>>>>>>>> thkey=!A KE0x0fh5QDkIIw&ithint=file%2czip This should
>>>>>>>>>> demonstrate the problem by processing several files.
>>>>>>>>> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>>>>>>>>>
>>>>>>>>> BR
>>>>>>>>> Maruan
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>>>>>>>>>> My flatten is done by the PDFBoxUtils.flatten() method.
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> -Kevin
>>>>>>>>>>
>>>>>>>>>> -----Original Message-----
>>>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>>>> Sent: Friday, September 11, 2015 12:17 PM
>>>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>>>>
>>>>>>>>>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>>>>>>>>>
>>>>>>>>>> BR
>>>>>>>>>> Maruan
>>>>>>>>>>
>>>>>>>>>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>>>>
>>>>>>>>>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>>>>>>>>>> There are some example codes out there but none of them work correctly for me.
>>>>>>>>>>>
>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>>>>> Sent: Friday, September 11, 2015 3:15 AM
>>>>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>>>>>
>>>>>>>>>>> Hi Kevin
>>>>>>>>>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>>>>>>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>>>>>>>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
RE: How flatten without changing appearance
Posted by Kevin Ternes <KT...@thegeneral.com>.
Maruan,
I finally got back around to trying this new flatten method out. It works fantastic as far as preserving the appearance of the fields.
However, if I flatten before a merge, I am still losing data entered into fields.
-----Original Message-----
From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
Sent: Tuesday, September 15, 2015 4:15 AM
To: users@pdfbox.apache.org
Subject: Re: How flatten without changing appearance
Hi,
> Am 15.09.2015 um 09:06 schrieb Tilman Hausherr <TH...@t-online.de>:
>
> Am 15.09.2015 um 09:02 schrieb Maruan Sahyoun:
>>> Am 15.09.2015 um 08:56 schrieb Tilman Hausherr <TH...@t-online.de>:
>>>
>>> Am 15.09.2015 um 08:48 schrieb Maruan Sahyoun:
>>>> Hi Tilman,
>>>>
>>>>> Am 15.09.2015 um 08:17 schrieb Tilman Hausherr <TH...@t-online.de>:
>>>>>
>>>>> Am 15.09.2015 um 04:47 schrieb Maruan Sahyoun:
>>>>>> Hi Kevin,
>>>>>>
>>>>>> I've created https://issues.apache.org/jira/browse/PDFBOX-2970 <https://issues.apache.org/jira/browse/PDFBOX-2970> for that.
>>>>>>
>>>>>> In addition you can start playing with that code based on the current PDFBox 2.0.0 snapshot.
>>>>>>
>>>>>>
>>>>>>
>>>>>> PDDocument doc = PDDocument.load(new File(...));
>>>>>> PDAcroForm acroForm = doc.getDocumentCatalog().getAcroForm();
>>>>>> // Iterate over all form fields and their widgets and create a
>>>>>> // FormXObject at the page content level from that
>>>>>> for (PDField field : acroForm.getFieldTree())
>>>>>> {
>>>>>> for (PDAnnotationWidget widget : ((PDTerminalField)field).getWidgets())
>>>>>> {
>>>>>> PDPage page = widget.getPage();
>>>>>> PDPageContentStream contentStream = new
>>>>>> PDPageContentStream(doc, page, true, true);
>>>>> I wasn't 100% sure what was meant with "flatten", but now I get it!
>>>>>
>>>>> I think the first one of the "new PDPageContentStream" should have the fifth parameter and be true, in case the existing content stream isn't included in q...Q.
>>>> thanks for stepping in.
>>>>
>>>> Is that really needed as we are storing/restoring the current state before the new content is added. Putting a store/restore around the existing one - assuming there is only one - would store/restore to the state before there was any content stream. In addition if there are already multiple streams before the new one would we need to put a store/restore around each of them? If there wasn't any that would potentially change the behavior of the old processing?
>>> The constructor identifies if there is already content, and only then, it inserts a saveGraphicsState() before the first existing stream and a restoreGraphicsState() at the end of the new one, so it work both with none, one, and many.
>>>
>>> Only doing it for the first one is to avoid having too many nesting
>>> q...Q
>> looking at how Adobe does it each of the new content streams is wrapped in a q ...Q - that's why I did the same.
>
> That isn't what I meant. I meant that only the first one should be
>
> PDPageContentStream contentStream = new PDPageContentStream(doc, page,
> true, true, true);
>
> instead of
>
> PDPageContentStream contentStream = new PDPageContentStream(doc, page,
> true, true);
>
> all the rest is fine as it is.
>
done - thanks for the clarification.
Maruan
>
> Tilman
>
>
>
>>
>>> What I was thinking of is cases where the existing content stream(s) modifies the CTM without resetting it. This would have the effect that the "fields" would appear at the wrong place / wrong size / outside of the screen. We're having this every few months that somebody wants to add a stamp to a page, it works for most, except for one "special" file.
>>>
>>> Tilman
>>>
>>>
>>>> BR
>>>> Maruan
>>>>
>>>>
>>>>
>>>>> Tilman
>>>>>
>>>>>> PDFormXObject fieldObject = new PDFormXObject(widget.getAppearance().getNormalAppearance().getAppearanceStream().getCOSStream());
>>>>>> Matrix translationMatrix = Matrix.getTranslateInstance(widget.getRectangle().getLowerLeftX(), widget.getRectangle().getLowerLeftY());
>>>>>> contentStream.saveGraphicsState();
>>>>>> contentStream.transform(translationMatrix);
>>>>>> contentStream.drawForm(fieldObject);
>>>>>> contentStream.restoreGraphicsState();
>>>>>> contentStream.close();
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> // preserve all non widget annotations
>>>>>> for (PDPage page : doc.getPages())
>>>>>> {
>>>>>> List<PDAnnotation> annotations = new ArrayList<PDAnnotation>();
>>>>>> for (PDAnnotation annotation: page.getAnnotations())
>>>>>> {
>>>>>> if (!(annotation instanceof PDAnnotationWidget))
>>>>>> {
>>>>>> annotations.add(annotation);
>>>>>> }
>>>>>> }
>>>>>> page.setAnnotations(annotations);
>>>>>> }
>>>>>> // remove the fields
>>>>>> acroForm.setFields(Collections.<PDField>emptyList());
>>>>>> doc.save(...);
>>>>>> doc.close();
>>>>>>
>>>>>>
>>>>>> BR
>>>>>> Maruan
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Am 14.09.2015 um 17:57 schrieb Maruan Sahyoun <sa...@fileaffairs.de>:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>
>>>>>>>> I am trying to refactor for 2.0.0-SNAPSHOT now.
>>>>>>>>
>>>>>>>> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
>>>>>>>> All the examples seem to pertain to v1.x
>>>>>>> there are non but I've started to get that into the project
>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>> Sent: Saturday, September 12, 2015 1:55 AM
>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>> Subject: Re: How flatten without changing appearance
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>>
>>>>>>>>> Maruan,
>>>>>>>>> That would be great. Please have a look at:
>>>>>>>>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&au
>>>>>>>>> thkey=!A KE0x0fh5QDkIIw&ithint=file%2czip This should
>>>>>>>>> demonstrate the problem by processing several files.
>>>>>>>> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>>>>>>>>
>>>>>>>> BR
>>>>>>>> Maruan
>>>>>>>>
>>>>>>>>
>>>>>>>>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>>>>>>>>> My flatten is done by the PDFBoxUtils.flatten() method.
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> -Kevin
>>>>>>>>>
>>>>>>>>> -----Original Message-----
>>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>>> Sent: Friday, September 11, 2015 12:17 PM
>>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>>>
>>>>>>>>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>>>>>>>>
>>>>>>>>> BR
>>>>>>>>> Maruan
>>>>>>>>>
>>>>>>>>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>>>
>>>>>>>>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>>>>>>>>> There are some example codes out there but none of them work correctly for me.
>>>>>>>>>>
>>>>>>>>>> -----Original Message-----
>>>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>>>> Sent: Friday, September 11, 2015 3:15 AM
>>>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>>>>
>>>>>>>>>> Hi Kevin
>>>>>>>>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>>>>>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>>>>>>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
Re: How flatten without changing appearance
Posted by Maruan Sahyoun <sa...@fileaffairs.de>.
Hi,
> Am 15.09.2015 um 09:06 schrieb Tilman Hausherr <TH...@t-online.de>:
>
> Am 15.09.2015 um 09:02 schrieb Maruan Sahyoun:
>>> Am 15.09.2015 um 08:56 schrieb Tilman Hausherr <TH...@t-online.de>:
>>>
>>> Am 15.09.2015 um 08:48 schrieb Maruan Sahyoun:
>>>> Hi Tilman,
>>>>
>>>>> Am 15.09.2015 um 08:17 schrieb Tilman Hausherr <TH...@t-online.de>:
>>>>>
>>>>> Am 15.09.2015 um 04:47 schrieb Maruan Sahyoun:
>>>>>> Hi Kevin,
>>>>>>
>>>>>> I've created https://issues.apache.org/jira/browse/PDFBOX-2970 <https://issues.apache.org/jira/browse/PDFBOX-2970> for that.
>>>>>>
>>>>>> In addition you can start playing with that code based on the current PDFBox 2.0.0 snapshot.
>>>>>>
>>>>>>
>>>>>>
>>>>>> PDDocument doc = PDDocument.load(new File(...));
>>>>>> PDAcroForm acroForm = doc.getDocumentCatalog().getAcroForm();
>>>>>> // Iterate over all form fields and their widgets and create a
>>>>>> // FormXObject at the page content level from that
>>>>>> for (PDField field : acroForm.getFieldTree())
>>>>>> {
>>>>>> for (PDAnnotationWidget widget : ((PDTerminalField)field).getWidgets())
>>>>>> {
>>>>>> PDPage page = widget.getPage();
>>>>>> PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true);
>>>>> I wasn't 100% sure what was meant with "flatten", but now I get it!
>>>>>
>>>>> I think the first one of the "new PDPageContentStream" should have the fifth parameter and be true, in case the existing content stream isn't included in q…Q.
>>>> thanks for stepping in.
>>>>
>>>> Is that really needed as we are storing/restoring the current state before the new content is added. Putting a store/restore around the existing one - assuming there is only one - would store/restore to the state before there was any content stream. In addition if there are already multiple streams before the new one would we need to put a store/restore around each of them? If there wasn't any that would potentially change the behavior of the old processing?
>>> The constructor identifies if there is already content, and only then, it inserts a saveGraphicsState() before the first existing stream and a restoreGraphicsState() at the end of the new one, so it work both with none, one, and many.
>>>
>>> Only doing it for the first one is to avoid having too many nesting q…Q
>> looking at how Adobe does it each of the new content streams is wrapped in a q …Q - that's why I did the same.
>
> That isn't what I meant. I meant that only the first one should be
>
> PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true, true);
>
> instead of
>
> PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true);
>
> all the rest is fine as it is.
>
done - thanks for the clarification.
Maruan
>
> Tilman
>
>
>
>>
>>> What I was thinking of is cases where the existing content stream(s) modifies the CTM without resetting it. This would have the effect that the "fields" would appear at the wrong place / wrong size / outside of the screen. We're having this every few months that somebody wants to add a stamp to a page, it works for most, except for one "special" file.
>>>
>>> Tilman
>>>
>>>
>>>> BR
>>>> Maruan
>>>>
>>>>
>>>>
>>>>> Tilman
>>>>>
>>>>>> PDFormXObject fieldObject = new PDFormXObject(widget.getAppearance().getNormalAppearance().getAppearanceStream().getCOSStream());
>>>>>> Matrix translationMatrix = Matrix.getTranslateInstance(widget.getRectangle().getLowerLeftX(), widget.getRectangle().getLowerLeftY());
>>>>>> contentStream.saveGraphicsState();
>>>>>> contentStream.transform(translationMatrix);
>>>>>> contentStream.drawForm(fieldObject);
>>>>>> contentStream.restoreGraphicsState();
>>>>>> contentStream.close();
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> // preserve all non widget annotations
>>>>>> for (PDPage page : doc.getPages())
>>>>>> {
>>>>>> List<PDAnnotation> annotations = new ArrayList<PDAnnotation>();
>>>>>> for (PDAnnotation annotation: page.getAnnotations())
>>>>>> {
>>>>>> if (!(annotation instanceof PDAnnotationWidget))
>>>>>> {
>>>>>> annotations.add(annotation);
>>>>>> }
>>>>>> }
>>>>>> page.setAnnotations(annotations);
>>>>>> }
>>>>>> // remove the fields
>>>>>> acroForm.setFields(Collections.<PDField>emptyList());
>>>>>> doc.save(...);
>>>>>> doc.close();
>>>>>>
>>>>>>
>>>>>> BR
>>>>>> Maruan
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Am 14.09.2015 um 17:57 schrieb Maruan Sahyoun <sa...@fileaffairs.de>:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>
>>>>>>>> I am trying to refactor for 2.0.0-SNAPSHOT now.
>>>>>>>>
>>>>>>>> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
>>>>>>>> All the examples seem to pertain to v1.x
>>>>>>> there are non but I've started to get that into the project
>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>> Sent: Saturday, September 12, 2015 1:55 AM
>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>> Subject: Re: How flatten without changing appearance
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>>
>>>>>>>>> Maruan,
>>>>>>>>> That would be great. Please have a look at:
>>>>>>>>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!A
>>>>>>>>> KE0x0fh5QDkIIw&ithint=file%2czip This should demonstrate the problem
>>>>>>>>> by processing several files.
>>>>>>>> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>>>>>>>>
>>>>>>>> BR
>>>>>>>> Maruan
>>>>>>>>
>>>>>>>>
>>>>>>>>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>>>>>>>>> My flatten is done by the PDFBoxUtils.flatten() method.
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> -Kevin
>>>>>>>>>
>>>>>>>>> -----Original Message-----
>>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>>> Sent: Friday, September 11, 2015 12:17 PM
>>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>>>
>>>>>>>>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>>>>>>>>
>>>>>>>>> BR
>>>>>>>>> Maruan
>>>>>>>>>
>>>>>>>>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>>>
>>>>>>>>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>>>>>>>>> There are some example codes out there but none of them work correctly for me.
>>>>>>>>>>
>>>>>>>>>> -----Original Message-----
>>>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>>>> Sent: Friday, September 11, 2015 3:15 AM
>>>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>>>>
>>>>>>>>>> Hi Kevin
>>>>>>>>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>>>>>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>>>>>>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>>>>>>>> ---------------------------------------------------------------------
>>>>>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>>>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
Re: How flatten without changing appearance
Posted by Tilman Hausherr <TH...@t-online.de>.
Am 15.09.2015 um 09:02 schrieb Maruan Sahyoun:
>> Am 15.09.2015 um 08:56 schrieb Tilman Hausherr <TH...@t-online.de>:
>>
>> Am 15.09.2015 um 08:48 schrieb Maruan Sahyoun:
>>> Hi Tilman,
>>>
>>>> Am 15.09.2015 um 08:17 schrieb Tilman Hausherr <TH...@t-online.de>:
>>>>
>>>> Am 15.09.2015 um 04:47 schrieb Maruan Sahyoun:
>>>>> Hi Kevin,
>>>>>
>>>>> I've created https://issues.apache.org/jira/browse/PDFBOX-2970 <https://issues.apache.org/jira/browse/PDFBOX-2970> for that.
>>>>>
>>>>> In addition you can start playing with that code based on the current PDFBox 2.0.0 snapshot.
>>>>>
>>>>>
>>>>>
>>>>> PDDocument doc = PDDocument.load(new File(...));
>>>>> PDAcroForm acroForm = doc.getDocumentCatalog().getAcroForm();
>>>>> // Iterate over all form fields and their widgets and create a
>>>>> // FormXObject at the page content level from that
>>>>> for (PDField field : acroForm.getFieldTree())
>>>>> {
>>>>> for (PDAnnotationWidget widget : ((PDTerminalField)field).getWidgets())
>>>>> {
>>>>> PDPage page = widget.getPage();
>>>>> PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true);
>>>> I wasn't 100% sure what was meant with "flatten", but now I get it!
>>>>
>>>> I think the first one of the "new PDPageContentStream" should have the fifth parameter and be true, in case the existing content stream isn't included in q…Q.
>>> thanks for stepping in.
>>>
>>> Is that really needed as we are storing/restoring the current state before the new content is added. Putting a store/restore around the existing one - assuming there is only one - would store/restore to the state before there was any content stream. In addition if there are already multiple streams before the new one would we need to put a store/restore around each of them? If there wasn't any that would potentially change the behavior of the old processing?
>> The constructor identifies if there is already content, and only then, it inserts a saveGraphicsState() before the first existing stream and a restoreGraphicsState() at the end of the new one, so it work both with none, one, and many.
>>
>> Only doing it for the first one is to avoid having too many nesting q…Q
> looking at how Adobe does it each of the new content streams is wrapped in a q …Q - that's why I did the same.
That isn't what I meant. I meant that only the first one should be
PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true, true);
instead of
PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true);
all the rest is fine as it is.
Tilman
>
>> What I was thinking of is cases where the existing content stream(s) modifies the CTM without resetting it. This would have the effect that the "fields" would appear at the wrong place / wrong size / outside of the screen. We're having this every few months that somebody wants to add a stamp to a page, it works for most, except for one "special" file.
>>
>> Tilman
>>
>>
>>> BR
>>> Maruan
>>>
>>>
>>>
>>>> Tilman
>>>>
>>>>> PDFormXObject fieldObject = new PDFormXObject(widget.getAppearance().getNormalAppearance().getAppearanceStream().getCOSStream());
>>>>> Matrix translationMatrix = Matrix.getTranslateInstance(widget.getRectangle().getLowerLeftX(), widget.getRectangle().getLowerLeftY());
>>>>> contentStream.saveGraphicsState();
>>>>> contentStream.transform(translationMatrix);
>>>>> contentStream.drawForm(fieldObject);
>>>>> contentStream.restoreGraphicsState();
>>>>> contentStream.close();
>>>>> }
>>>>> }
>>>>>
>>>>> // preserve all non widget annotations
>>>>> for (PDPage page : doc.getPages())
>>>>> {
>>>>> List<PDAnnotation> annotations = new ArrayList<PDAnnotation>();
>>>>> for (PDAnnotation annotation: page.getAnnotations())
>>>>> {
>>>>> if (!(annotation instanceof PDAnnotationWidget))
>>>>> {
>>>>> annotations.add(annotation);
>>>>> }
>>>>> }
>>>>> page.setAnnotations(annotations);
>>>>> }
>>>>> // remove the fields
>>>>> acroForm.setFields(Collections.<PDField>emptyList());
>>>>> doc.save(...);
>>>>> doc.close();
>>>>>
>>>>>
>>>>> BR
>>>>> Maruan
>>>>>
>>>>>
>>>>>
>>>>>> Am 14.09.2015 um 17:57 schrieb Maruan Sahyoun <sa...@fileaffairs.de>:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>
>>>>>>> I am trying to refactor for 2.0.0-SNAPSHOT now.
>>>>>>>
>>>>>>> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
>>>>>>> All the examples seem to pertain to v1.x
>>>>>> there are non but I've started to get that into the project
>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>> Sent: Saturday, September 12, 2015 1:55 AM
>>>>>>> To: users@pdfbox.apache.org
>>>>>>> Subject: Re: How flatten without changing appearance
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>
>>>>>>>> Maruan,
>>>>>>>> That would be great. Please have a look at:
>>>>>>>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!A
>>>>>>>> KE0x0fh5QDkIIw&ithint=file%2czip This should demonstrate the problem
>>>>>>>> by processing several files.
>>>>>>> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>>>>>>>
>>>>>>> BR
>>>>>>> Maruan
>>>>>>>
>>>>>>>
>>>>>>>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>>>>>>>> My flatten is done by the PDFBoxUtils.flatten() method.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> -Kevin
>>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>> Sent: Friday, September 11, 2015 12:17 PM
>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>>
>>>>>>>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>>>>>>>
>>>>>>>> BR
>>>>>>>> Maruan
>>>>>>>>
>>>>>>>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>>
>>>>>>>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>>>>>>>> There are some example codes out there but none of them work correctly for me.
>>>>>>>>>
>>>>>>>>> -----Original Message-----
>>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>>> Sent: Friday, September 11, 2015 3:15 AM
>>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>>>
>>>>>>>>> Hi Kevin
>>>>>>>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>>>>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>>>>>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>>>>>>> ---------------------------------------------------------------------
>>>>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
Re: How flatten without changing appearance
Posted by Maruan Sahyoun <sa...@fileaffairs.de>.
> Am 15.09.2015 um 08:56 schrieb Tilman Hausherr <TH...@t-online.de>:
>
> Am 15.09.2015 um 08:48 schrieb Maruan Sahyoun:
>> Hi Tilman,
>>
>>> Am 15.09.2015 um 08:17 schrieb Tilman Hausherr <TH...@t-online.de>:
>>>
>>> Am 15.09.2015 um 04:47 schrieb Maruan Sahyoun:
>>>> Hi Kevin,
>>>>
>>>> I've created https://issues.apache.org/jira/browse/PDFBOX-2970 <https://issues.apache.org/jira/browse/PDFBOX-2970> for that.
>>>>
>>>> In addition you can start playing with that code based on the current PDFBox 2.0.0 snapshot.
>>>>
>>>>
>>>>
>>>> PDDocument doc = PDDocument.load(new File(...));
>>>> PDAcroForm acroForm = doc.getDocumentCatalog().getAcroForm();
>>>> // Iterate over all form fields and their widgets and create a
>>>> // FormXObject at the page content level from that
>>>> for (PDField field : acroForm.getFieldTree())
>>>> {
>>>> for (PDAnnotationWidget widget : ((PDTerminalField)field).getWidgets())
>>>> {
>>>> PDPage page = widget.getPage();
>>>> PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true);
>>> I wasn't 100% sure what was meant with "flatten", but now I get it!
>>>
>>> I think the first one of the "new PDPageContentStream" should have the fifth parameter and be true, in case the existing content stream isn't included in q…Q.
>> thanks for stepping in.
>>
>> Is that really needed as we are storing/restoring the current state before the new content is added. Putting a store/restore around the existing one - assuming there is only one - would store/restore to the state before there was any content stream. In addition if there are already multiple streams before the new one would we need to put a store/restore around each of them? If there wasn't any that would potentially change the behavior of the old processing?
>
> The constructor identifies if there is already content, and only then, it inserts a saveGraphicsState() before the first existing stream and a restoreGraphicsState() at the end of the new one, so it work both with none, one, and many.
>
> Only doing it for the first one is to avoid having too many nesting q…Q
looking at how Adobe does it each of the new content streams is wrapped in a q …Q - that's why I did the same.
>
> What I was thinking of is cases where the existing content stream(s) modifies the CTM without resetting it. This would have the effect that the "fields" would appear at the wrong place / wrong size / outside of the screen. We're having this every few months that somebody wants to add a stamp to a page, it works for most, except for one "special" file.
>
> Tilman
>
>
>>
>> BR
>> Maruan
>>
>>
>>
>>> Tilman
>>>
>>>> PDFormXObject fieldObject = new PDFormXObject(widget.getAppearance().getNormalAppearance().getAppearanceStream().getCOSStream());
>>>> Matrix translationMatrix = Matrix.getTranslateInstance(widget.getRectangle().getLowerLeftX(), widget.getRectangle().getLowerLeftY());
>>>> contentStream.saveGraphicsState();
>>>> contentStream.transform(translationMatrix);
>>>> contentStream.drawForm(fieldObject);
>>>> contentStream.restoreGraphicsState();
>>>> contentStream.close();
>>>> }
>>>> }
>>>>
>>>> // preserve all non widget annotations
>>>> for (PDPage page : doc.getPages())
>>>> {
>>>> List<PDAnnotation> annotations = new ArrayList<PDAnnotation>();
>>>> for (PDAnnotation annotation: page.getAnnotations())
>>>> {
>>>> if (!(annotation instanceof PDAnnotationWidget))
>>>> {
>>>> annotations.add(annotation);
>>>> }
>>>> }
>>>> page.setAnnotations(annotations);
>>>> }
>>>> // remove the fields
>>>> acroForm.setFields(Collections.<PDField>emptyList());
>>>> doc.save(...);
>>>> doc.close();
>>>>
>>>>
>>>> BR
>>>> Maruan
>>>>
>>>>
>>>>
>>>>> Am 14.09.2015 um 17:57 schrieb Maruan Sahyoun <sa...@fileaffairs.de>:
>>>>>
>>>>>
>>>>>
>>>>>> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>
>>>>>> I am trying to refactor for 2.0.0-SNAPSHOT now.
>>>>>>
>>>>>> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
>>>>>> All the examples seem to pertain to v1.x
>>>>> there are non but I've started to get that into the project
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>> Sent: Saturday, September 12, 2015 1:55 AM
>>>>>> To: users@pdfbox.apache.org
>>>>>> Subject: Re: How flatten without changing appearance
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>
>>>>>>> Maruan,
>>>>>>> That would be great. Please have a look at:
>>>>>>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!A
>>>>>>> KE0x0fh5QDkIIw&ithint=file%2czip This should demonstrate the problem
>>>>>>> by processing several files.
>>>>>> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>>>>>>
>>>>>> BR
>>>>>> Maruan
>>>>>>
>>>>>>
>>>>>>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>>>>>>> My flatten is done by the PDFBoxUtils.flatten() method.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> -Kevin
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>> Sent: Friday, September 11, 2015 12:17 PM
>>>>>>> To: users@pdfbox.apache.org
>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>
>>>>>>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>>>>>>
>>>>>>> BR
>>>>>>> Maruan
>>>>>>>
>>>>>>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>>
>>>>>>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>>>>>>> There are some example codes out there but none of them work correctly for me.
>>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>>> Sent: Friday, September 11, 2015 3:15 AM
>>>>>>>> To: users@pdfbox.apache.org
>>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>>
>>>>>>>> Hi Kevin
>>>>>>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>>>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>>>>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
Re: How flatten without changing appearance
Posted by Tilman Hausherr <TH...@t-online.de>.
Am 15.09.2015 um 08:48 schrieb Maruan Sahyoun:
> Hi Tilman,
>
>> Am 15.09.2015 um 08:17 schrieb Tilman Hausherr <TH...@t-online.de>:
>>
>> Am 15.09.2015 um 04:47 schrieb Maruan Sahyoun:
>>> Hi Kevin,
>>>
>>> I've created https://issues.apache.org/jira/browse/PDFBOX-2970 <https://issues.apache.org/jira/browse/PDFBOX-2970> for that.
>>>
>>> In addition you can start playing with that code based on the current PDFBox 2.0.0 snapshot.
>>>
>>>
>>>
>>> PDDocument doc = PDDocument.load(new File(...));
>>> PDAcroForm acroForm = doc.getDocumentCatalog().getAcroForm();
>>> // Iterate over all form fields and their widgets and create a
>>> // FormXObject at the page content level from that
>>> for (PDField field : acroForm.getFieldTree())
>>> {
>>> for (PDAnnotationWidget widget : ((PDTerminalField)field).getWidgets())
>>> {
>>> PDPage page = widget.getPage();
>>> PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true);
>> I wasn't 100% sure what was meant with "flatten", but now I get it!
>>
>> I think the first one of the "new PDPageContentStream" should have the fifth parameter and be true, in case the existing content stream isn't included in q…Q.
> thanks for stepping in.
>
> Is that really needed as we are storing/restoring the current state before the new content is added. Putting a store/restore around the existing one - assuming there is only one - would store/restore to the state before there was any content stream. In addition if there are already multiple streams before the new one would we need to put a store/restore around each of them? If there wasn't any that would potentially change the behavior of the old processing?
The constructor identifies if there is already content, and only then,
it inserts a saveGraphicsState() before the first existing stream and a
restoreGraphicsState() at the end of the new one, so it work both with
none, one, and many.
Only doing it for the first one is to avoid having too many nesting q...Q
What I was thinking of is cases where the existing content stream(s)
modifies the CTM without resetting it. This would have the effect that
the "fields" would appear at the wrong place / wrong size / outside of
the screen. We're having this every few months that somebody wants to
add a stamp to a page, it works for most, except for one "special" file.
Tilman
>
> BR
> Maruan
>
>
>
>> Tilman
>>
>>> PDFormXObject fieldObject = new PDFormXObject(widget.getAppearance().getNormalAppearance().getAppearanceStream().getCOSStream());
>>> Matrix translationMatrix = Matrix.getTranslateInstance(widget.getRectangle().getLowerLeftX(), widget.getRectangle().getLowerLeftY());
>>> contentStream.saveGraphicsState();
>>> contentStream.transform(translationMatrix);
>>> contentStream.drawForm(fieldObject);
>>> contentStream.restoreGraphicsState();
>>> contentStream.close();
>>> }
>>> }
>>>
>>> // preserve all non widget annotations
>>> for (PDPage page : doc.getPages())
>>> {
>>> List<PDAnnotation> annotations = new ArrayList<PDAnnotation>();
>>> for (PDAnnotation annotation: page.getAnnotations())
>>> {
>>> if (!(annotation instanceof PDAnnotationWidget))
>>> {
>>> annotations.add(annotation);
>>> }
>>> }
>>> page.setAnnotations(annotations);
>>> }
>>> // remove the fields
>>> acroForm.setFields(Collections.<PDField>emptyList());
>>> doc.save(...);
>>> doc.close();
>>>
>>>
>>> BR
>>> Maruan
>>>
>>>
>>>
>>>> Am 14.09.2015 um 17:57 schrieb Maruan Sahyoun <sa...@fileaffairs.de>:
>>>>
>>>>
>>>>
>>>>> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>
>>>>> I am trying to refactor for 2.0.0-SNAPSHOT now.
>>>>>
>>>>> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
>>>>> All the examples seem to pertain to v1.x
>>>> there are non but I've started to get that into the project
>>>>
>>>>> -----Original Message-----
>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>> Sent: Saturday, September 12, 2015 1:55 AM
>>>>> To: users@pdfbox.apache.org
>>>>> Subject: Re: How flatten without changing appearance
>>>>>
>>>>> Hi,
>>>>>
>>>>>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>
>>>>>> Maruan,
>>>>>> That would be great. Please have a look at:
>>>>>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!A
>>>>>> KE0x0fh5QDkIIw&ithint=file%2czip This should demonstrate the problem
>>>>>> by processing several files.
>>>>> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>>>>>
>>>>> BR
>>>>> Maruan
>>>>>
>>>>>
>>>>>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>>>>>> My flatten is done by the PDFBoxUtils.flatten() method.
>>>>>>
>>>>>> Thanks,
>>>>>> -Kevin
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>> Sent: Friday, September 11, 2015 12:17 PM
>>>>>> To: users@pdfbox.apache.org
>>>>>> Subject: Re: How to merge forms where there is
>>>>>>
>>>>>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>>>>>
>>>>>> BR
>>>>>> Maruan
>>>>>>
>>>>>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>>
>>>>>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>>>>>> There are some example codes out there but none of them work correctly for me.
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>>> Sent: Friday, September 11, 2015 3:15 AM
>>>>>>> To: users@pdfbox.apache.org
>>>>>>> Subject: Re: How to merge forms where there is
>>>>>>>
>>>>>>> Hi Kevin
>>>>>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>>>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
Re: How flatten without changing appearance
Posted by Maruan Sahyoun <sa...@fileaffairs.de>.
Hi Tilman,
> Am 15.09.2015 um 08:17 schrieb Tilman Hausherr <TH...@t-online.de>:
>
> Am 15.09.2015 um 04:47 schrieb Maruan Sahyoun:
>> Hi Kevin,
>>
>> I've created https://issues.apache.org/jira/browse/PDFBOX-2970 <https://issues.apache.org/jira/browse/PDFBOX-2970> for that.
>>
>> In addition you can start playing with that code based on the current PDFBox 2.0.0 snapshot.
>>
>>
>>
>> PDDocument doc = PDDocument.load(new File(...));
>> PDAcroForm acroForm = doc.getDocumentCatalog().getAcroForm();
>> // Iterate over all form fields and their widgets and create a
>> // FormXObject at the page content level from that
>> for (PDField field : acroForm.getFieldTree())
>> {
>> for (PDAnnotationWidget widget : ((PDTerminalField)field).getWidgets())
>> {
>> PDPage page = widget.getPage();
>> PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true);
>
> I wasn't 100% sure what was meant with "flatten", but now I get it!
>
> I think the first one of the "new PDPageContentStream" should have the fifth parameter and be true, in case the existing content stream isn't included in q…Q.
thanks for stepping in.
Is that really needed as we are storing/restoring the current state before the new content is added. Putting a store/restore around the existing one - assuming there is only one - would store/restore to the state before there was any content stream. In addition if there are already multiple streams before the new one would we need to put a store/restore around each of them? If there wasn't any that would potentially change the behavior of the old processing?
BR
Maruan
>
> Tilman
>
>> PDFormXObject fieldObject = new PDFormXObject(widget.getAppearance().getNormalAppearance().getAppearanceStream().getCOSStream());
>> Matrix translationMatrix = Matrix.getTranslateInstance(widget.getRectangle().getLowerLeftX(), widget.getRectangle().getLowerLeftY());
>> contentStream.saveGraphicsState();
>> contentStream.transform(translationMatrix);
>> contentStream.drawForm(fieldObject);
>> contentStream.restoreGraphicsState();
>> contentStream.close();
>> }
>> }
>>
>> // preserve all non widget annotations
>> for (PDPage page : doc.getPages())
>> {
>> List<PDAnnotation> annotations = new ArrayList<PDAnnotation>();
>> for (PDAnnotation annotation: page.getAnnotations())
>> {
>> if (!(annotation instanceof PDAnnotationWidget))
>> {
>> annotations.add(annotation);
>> }
>> }
>> page.setAnnotations(annotations);
>> }
>> // remove the fields
>> acroForm.setFields(Collections.<PDField>emptyList());
>> doc.save(...);
>> doc.close();
>>
>>
>> BR
>> Maruan
>>
>>
>>
>>> Am 14.09.2015 um 17:57 schrieb Maruan Sahyoun <sa...@fileaffairs.de>:
>>>
>>>
>>>
>>>> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>
>>>> I am trying to refactor for 2.0.0-SNAPSHOT now.
>>>>
>>>> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
>>>> All the examples seem to pertain to v1.x
>>> there are non but I've started to get that into the project
>>>
>>>> -----Original Message-----
>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>> Sent: Saturday, September 12, 2015 1:55 AM
>>>> To: users@pdfbox.apache.org
>>>> Subject: Re: How flatten without changing appearance
>>>>
>>>> Hi,
>>>>
>>>>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>
>>>>> Maruan,
>>>>> That would be great. Please have a look at:
>>>>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!A
>>>>> KE0x0fh5QDkIIw&ithint=file%2czip This should demonstrate the problem
>>>>> by processing several files.
>>>> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>>>>
>>>> BR
>>>> Maruan
>>>>
>>>>
>>>>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>>>>> My flatten is done by the PDFBoxUtils.flatten() method.
>>>>>
>>>>> Thanks,
>>>>> -Kevin
>>>>>
>>>>> -----Original Message-----
>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>> Sent: Friday, September 11, 2015 12:17 PM
>>>>> To: users@pdfbox.apache.org
>>>>> Subject: Re: How to merge forms where there is
>>>>>
>>>>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>>>>
>>>>> BR
>>>>> Maruan
>>>>>
>>>>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>>
>>>>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>>>>> There are some example codes out there but none of them work correctly for me.
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>>> Sent: Friday, September 11, 2015 3:15 AM
>>>>>> To: users@pdfbox.apache.org
>>>>>> Subject: Re: How to merge forms where there is
>>>>>>
>>>>>> Hi Kevin
>>>>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
Re: How flatten without changing appearance
Posted by Tilman Hausherr <TH...@t-online.de>.
Am 15.09.2015 um 04:47 schrieb Maruan Sahyoun:
> Hi Kevin,
>
> I've created https://issues.apache.org/jira/browse/PDFBOX-2970 <https://issues.apache.org/jira/browse/PDFBOX-2970> for that.
>
> In addition you can start playing with that code based on the current PDFBox 2.0.0 snapshot.
>
>
>
> PDDocument doc = PDDocument.load(new File(...));
> PDAcroForm acroForm = doc.getDocumentCatalog().getAcroForm();
>
> // Iterate over all form fields and their widgets and create a
> // FormXObject at the page content level from that
> for (PDField field : acroForm.getFieldTree())
> {
> for (PDAnnotationWidget widget : ((PDTerminalField)field).getWidgets())
> {
> PDPage page = widget.getPage();
> PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true);
I wasn't 100% sure what was meant with "flatten", but now I get it!
I think the first one of the "new PDPageContentStream" should have the
fifth parameter and be true, in case the existing content stream isn't
included in q...Q.
Tilman
> PDFormXObject fieldObject = new PDFormXObject(widget.getAppearance().getNormalAppearance().getAppearanceStream().getCOSStream());
>
> Matrix translationMatrix = Matrix.getTranslateInstance(widget.getRectangle().getLowerLeftX(), widget.getRectangle().getLowerLeftY());
> contentStream.saveGraphicsState();
> contentStream.transform(translationMatrix);
> contentStream.drawForm(fieldObject);
> contentStream.restoreGraphicsState();
> contentStream.close();
> }
> }
>
> // preserve all non widget annotations
> for (PDPage page : doc.getPages())
> {
> List<PDAnnotation> annotations = new ArrayList<PDAnnotation>();
>
> for (PDAnnotation annotation: page.getAnnotations())
> {
> if (!(annotation instanceof PDAnnotationWidget))
> {
> annotations.add(annotation);
> }
> }
> page.setAnnotations(annotations);
> }
>
> // remove the fields
> acroForm.setFields(Collections.<PDField>emptyList());
>
> doc.save(...);
> doc.close();
>
>
> BR
> Maruan
>
>
>
>> Am 14.09.2015 um 17:57 schrieb Maruan Sahyoun <sa...@fileaffairs.de>:
>>
>>
>>
>>> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>
>>> I am trying to refactor for 2.0.0-SNAPSHOT now.
>>>
>>> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
>>> All the examples seem to pertain to v1.x
>> there are non but I've started to get that into the project
>>
>>> -----Original Message-----
>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>> Sent: Saturday, September 12, 2015 1:55 AM
>>> To: users@pdfbox.apache.org
>>> Subject: Re: How flatten without changing appearance
>>>
>>> Hi,
>>>
>>>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>
>>>> Maruan,
>>>> That would be great. Please have a look at:
>>>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!A
>>>> KE0x0fh5QDkIIw&ithint=file%2czip This should demonstrate the problem
>>>> by processing several files.
>>> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>>>
>>> BR
>>> Maruan
>>>
>>>
>>>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>>>> My flatten is done by the PDFBoxUtils.flatten() method.
>>>>
>>>> Thanks,
>>>> -Kevin
>>>>
>>>> -----Original Message-----
>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>> Sent: Friday, September 11, 2015 12:17 PM
>>>> To: users@pdfbox.apache.org
>>>> Subject: Re: How to merge forms where there is
>>>>
>>>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>>>
>>>> BR
>>>> Maruan
>>>>
>>>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>>
>>>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>>>> There are some example codes out there but none of them work correctly for me.
>>>>>
>>>>> -----Original Message-----
>>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>>> Sent: Friday, September 11, 2015 3:15 AM
>>>>> To: users@pdfbox.apache.org
>>>>> Subject: Re: How to merge forms where there is
>>>>>
>>>>> Hi Kevin
>>>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
Re: How flatten without changing appearance
Posted by Maruan Sahyoun <sa...@fileaffairs.de>.
Hi Kevin,
I've created https://issues.apache.org/jira/browse/PDFBOX-2970 <https://issues.apache.org/jira/browse/PDFBOX-2970> for that.
In addition you can start playing with that code based on the current PDFBox 2.0.0 snapshot.
PDDocument doc = PDDocument.load(new File(...));
PDAcroForm acroForm = doc.getDocumentCatalog().getAcroForm();
// Iterate over all form fields and their widgets and create a
// FormXObject at the page content level from that
for (PDField field : acroForm.getFieldTree())
{
for (PDAnnotationWidget widget : ((PDTerminalField)field).getWidgets())
{
PDPage page = widget.getPage();
PDPageContentStream contentStream = new PDPageContentStream(doc, page, true, true);
PDFormXObject fieldObject = new PDFormXObject(widget.getAppearance().getNormalAppearance().getAppearanceStream().getCOSStream());
Matrix translationMatrix = Matrix.getTranslateInstance(widget.getRectangle().getLowerLeftX(), widget.getRectangle().getLowerLeftY());
contentStream.saveGraphicsState();
contentStream.transform(translationMatrix);
contentStream.drawForm(fieldObject);
contentStream.restoreGraphicsState();
contentStream.close();
}
}
// preserve all non widget annotations
for (PDPage page : doc.getPages())
{
List<PDAnnotation> annotations = new ArrayList<PDAnnotation>();
for (PDAnnotation annotation: page.getAnnotations())
{
if (!(annotation instanceof PDAnnotationWidget))
{
annotations.add(annotation);
}
}
page.setAnnotations(annotations);
}
// remove the fields
acroForm.setFields(Collections.<PDField>emptyList());
doc.save(...);
doc.close();
BR
Maruan
> Am 14.09.2015 um 17:57 schrieb Maruan Sahyoun <sa...@fileaffairs.de>:
>
>
>
>> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>
>> I am trying to refactor for 2.0.0-SNAPSHOT now.
>>
>> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
>> All the examples seem to pertain to v1.x
>
> there are non but I've started to get that into the project
>
>>
>> -----Original Message-----
>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>> Sent: Saturday, September 12, 2015 1:55 AM
>> To: users@pdfbox.apache.org
>> Subject: Re: How flatten without changing appearance
>>
>> Hi,
>>
>>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>
>>> Maruan,
>>> That would be great. Please have a look at:
>>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!A
>>> KE0x0fh5QDkIIw&ithint=file%2czip This should demonstrate the problem
>>> by processing several files.
>>
>> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>>
>> BR
>> Maruan
>>
>>
>>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>>> My flatten is done by the PDFBoxUtils.flatten() method.
>>>
>>> Thanks,
>>> -Kevin
>>>
>>> -----Original Message-----
>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>> Sent: Friday, September 11, 2015 12:17 PM
>>> To: users@pdfbox.apache.org
>>> Subject: Re: How to merge forms where there is
>>>
>>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>>
>>> BR
>>> Maruan
>>>
>>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>>
>>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>>> There are some example codes out there but none of them work correctly for me.
>>>>
>>>> -----Original Message-----
>>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>>> Sent: Friday, September 11, 2015 3:15 AM
>>>> To: users@pdfbox.apache.org
>>>> Subject: Re: How to merge forms where there is
>>>>
>>>> Hi Kevin
>>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>>
>>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>>
>>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
Re: How flatten without changing appearance
Posted by Maruan Sahyoun <sa...@fileaffairs.de>.
> Am 14.09.2015 um 16:53 schrieb Kevin Ternes <KT...@thegeneral.com>:
>
> I am trying to refactor for 2.0.0-SNAPSHOT now.
>
> Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
> All the examples seem to pertain to v1.x
there are non but I've started to get that into the project
>
> -----Original Message-----
> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
> Sent: Saturday, September 12, 2015 1:55 AM
> To: users@pdfbox.apache.org
> Subject: Re: How flatten without changing appearance
>
> Hi,
>
>> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>
>> Maruan,
>> That would be great. Please have a look at:
>> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!A
>> KE0x0fh5QDkIIw&ithint=file%2czip This should demonstrate the problem
>> by processing several files.
>
> I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
>
> BR
> Maruan
>
>
>> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
>> My flatten is done by the PDFBoxUtils.flatten() method.
>>
>> Thanks,
>> -Kevin
>>
>> -----Original Message-----
>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>> Sent: Friday, September 11, 2015 12:17 PM
>> To: users@pdfbox.apache.org
>> Subject: Re: How to merge forms where there is
>>
>> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>>
>> BR
>> Maruan
>>
>>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>>
>>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>>> There are some example codes out there but none of them work correctly for me.
>>>
>>> -----Original Message-----
>>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>>> Sent: Friday, September 11, 2015 3:15 AM
>>> To: users@pdfbox.apache.org
>>> Subject: Re: How to merge forms where there is
>>>
>>> Hi Kevin
>>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>>
>>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>>
>>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
RE: How flatten without changing appearance
Posted by Kevin Ternes <KT...@thegeneral.com>.
I am trying to refactor for 2.0.0-SNAPSHOT now.
Can someone tell me how to flatten a PDDocument in PDFBox 2 ?
All the examples seem to pertain to v1.x
-----Original Message-----
From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
Sent: Saturday, September 12, 2015 1:55 AM
To: users@pdfbox.apache.org
Subject: Re: How flatten without changing appearance
Hi,
> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>
> Maruan,
> That would be great. Please have a look at:
> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!A
> KE0x0fh5QDkIIw&ithint=file%2czip This should demonstrate the problem
> by processing several files.
>
I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
BR
Maruan
> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
> My flatten is done by the PDFBoxUtils.flatten() method.
>
> Thanks,
> -Kevin
>
> -----Original Message-----
> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
> Sent: Friday, September 11, 2015 12:17 PM
> To: users@pdfbox.apache.org
> Subject: Re: How to merge forms where there is
>
> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>
> BR
> Maruan
>
>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>
>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>> There are some example codes out there but none of them work correctly for me.
>>
>> -----Original Message-----
>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>> Sent: Friday, September 11, 2015 3:15 AM
>> To: users@pdfbox.apache.org
>> Subject: Re: How to merge forms where there is
>>
>> Hi Kevin
>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>
>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>
>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org
Re: How flatten without changing appearance
Posted by Maruan Sahyoun <sa...@fileaffairs.de>.
Hi,
> Am 12.09.2015 um 00:08 schrieb Kevin Ternes <KT...@thegeneral.com>:
>
> Maruan,
> That would be great. Please have a look at:
> https://onedrive.live.com/redir?resid=9CCA324BE57ADA7!76929&authkey=!AKE0x0fh5QDkIIw&ithint=file%2czip
> This should demonstrate the problem by processing several files.
>
I took a quick look. Which version of PDFBox are you using? Would it be possible to go to (the yet to be released) 2.0.0 version?
BR
Maruan
> The users complaint is: Boxes are being greyed out and font sizes are being changed by the flatten.
> My flatten is done by the PDFBoxUtils.flatten() method.
>
> Thanks,
> -Kevin
>
> -----Original Message-----
> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
> Sent: Friday, September 11, 2015 12:17 PM
> To: users@pdfbox.apache.org
> Subject: Re: How to merge forms where there is
>
> how urgent is it for you? If you could share a sample file and your code for flattening I could take a look.
>
> BR
> Maruan
>
>> Am 11.09.2015 um 18:23 schrieb Kevin Ternes <KT...@thegeneral.com>:
>>
>> I have not been able to successfully flatten a document without affecting the formatting of the field.
>> There are some example codes out there but none of them work correctly for me.
>>
>> -----Original Message-----
>> From: Maruan Sahyoun [mailto:sahyoun@fileaffairs.de]
>> Sent: Friday, September 11, 2015 3:15 AM
>> To: users@pdfbox.apache.org
>> Subject: Re: How to merge forms where there is
>>
>> Hi Kevin
>> None of these field values will need to be changed afterward the merge. They are set to read-only.
>>>
>>> I tried flattening the source fields but most of these documents rely on field annotation for the field value formatting and this is not to be changed.
>>
>> when a field is flattened correctly the formatting of the annotations visually representing the field become part of the page content stream. So if you don't need the fields at all - as there is no further input - you could flatten the source documents prior to merging them.
>>
>> BR
>> Maruan
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
For additional commands, e-mail: users-help@pdfbox.apache.org