You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by ol...@landshut.org on 2020/12/14 18:10:42 UTC
AW: AW: AW: Moodle PlugIn
Hi Ali and Maxim,
thank you for your advice, but unfortunately it doesn't work.
I just waited for the new version 5.1 (thanks to Alvaro), but the same behavior is evident. After I have filled out the form fields and clicked Save, I am asked for the admin password and then the new user is not created. What am I doing wrong?
Best regards, Oliver
Von: Ali Alhaidary <al...@the5stars.org>
Gesendet: Dienstag, 10. November 2020 12:10
An: user@openmeetings.apache.org
Betreff: Re: AW: AW: Moodle PlugIn
This will happen if you click '+' immediately after entering the 'users' screen, I think a jira should be raised, however, if you follow:
1. Login: Dashboard will be displayed.
2. Administration --> USERS : The users list screen will be displayed
3. click on any of the users: That user information will be displayed.
4. click on the '+' icon: a new and empty record will be created.
5. Fill in information and click 'save' icon.
On 11/9/20 10:40 PM, oliver.neumann@landshut.org <ma...@landshut.org> wrote:
Hi,
that makes no difference. When I first click +, the messages "'Email address' is required." and "'Login' is required." pop up.
Best regarts,
Oliver.
Von: Ali Alhaidary <ma...@the5stars.org> <al...@the5stars.org>
Gesendet: Montag, 9. November 2020 19:50
An: user@openmeetings.apache.org <ma...@openmeetings.apache.org>
Betreff: Re: AW: Moodle PlugIn
Hi,
Did you click on add user "+" first?
On 11/9/20 9:19 PM, oliver.neumann@landshut.org <ma...@landshut.org> wrote:
Hello Ali,
hello Maxim,
thank you for your answer. I followed your suggestion, but immidiately after i pushed the save-button, the new soapuser was not added and the formularmask remains in the original state after pushing teh refresh-button (see below).
Best regards,
Oliver.
Von: Ali Alhaidary <ma...@the5stars.org> <al...@the5stars.org>
Gesendet: Sonntag, 8. November 2020 14:15
An: user@openmeetings.apache.org <ma...@openmeetings.apache.org>
Betreff: Re: Moodle PlugIn
On 11/8/20 3:21 PM, Maxim Solodovnik wrote:
Hello Oliver,
soap user for Moodle should
1) have `SOAP` and `LOGIN` rights (others should be removed)
2) should be assigned to any group
if you do not assign a group, the following message is displayed:
Warning
User added but you need to assign this user to a usergroup, otherwise they won't be able to log in
And, the plug in will not work, so, to start, assign it to the default group, then after creation of the room in moodle, a new group is created, 'moodle' you can move that user to 'moodle' group.
3) should have type `USER`
I guess that's it :)
On Sun, 8 Nov 2020 at 16:56, <oliver.neumann@landshut.org <ma...@landshut.org> > wrote:
Hello everyone,
I have just installed an OpenMeetings server 5.0.1 under Debian 10 and would like to make it available in Moodle via the PlugIn. Can someone please tell me what to enter here (soap user, user group, ...):
Best regards,
Oliver Neumann
--
Best regards,
Maxim
RE: AW: AW: Moodle PlugIn
Posted by Ali Alhaidary <al...@the5stars.org>.
Hi Oliver,
Can you please put in detail your steps and describing the result of each…
علي الحيدري
From: oliver.neumann@landshut.org
Sent: Monday, December 14, 2020 9:11 PM
To: user@openmeetings.apache.org
Subject: AW: AW: AW: Moodle PlugIn
Hi Ali and Maxim,
thank you for your advice, but unfortunately it doesn't work.
I just waited for the new version 5.1 (thanks to Alvaro), but the same behavior is evident. After I have filled out the form fields and clicked Save, I am asked for the admin password and then the new user is not created. What am I doing wrong?
Best regards, Oliver
Von: Ali Alhaidary <al...@the5stars.org>
Gesendet: Dienstag, 10. November 2020 12:10
An: user@openmeetings.apache.org
Betreff: Re: AW: AW: Moodle PlugIn
This will happen if you click '+' immediately after entering the 'users' screen, I think a jira should be raised, however, if you follow:
1. Login: Dashboard will be displayed.
2. Administration --> USERS : The users list screen will be displayed
3. click on any of the users: That user information will be displayed.
4. click on the '+' icon: a new and empty record will be created.
5. Fill in information and click 'save' icon.
On 11/9/20 10:40 PM, oliver.neumann@landshut.org wrote:
Hi,
that makes no difference. When I first click +, the messages "'Email address' is required." and "'Login' is required." pop up.
Best regarts,
Oliver.
Von: Ali Alhaidary <al...@the5stars.org>
Gesendet: Montag, 9. November 2020 19:50
An: user@openmeetings.apache.org
Betreff: Re: AW: Moodle PlugIn
Hi,
Did you click on add user "+" first?
On 11/9/20 9:19 PM, oliver.neumann@landshut.org wrote:
Hello Ali,
hello Maxim,
thank you for your answer. I followed your suggestion, but immidiately after i pushed the save-button, the new soapuser was not added and the formularmask remains in the original state after pushing teh refresh-button (see below).
Best regards,
Oliver.
Von: Ali Alhaidary <al...@the5stars.org>
Gesendet: Sonntag, 8. November 2020 14:15
An: user@openmeetings.apache.org
Betreff: Re: Moodle PlugIn
On 11/8/20 3:21 PM, Maxim Solodovnik wrote:
Hello Oliver,
soap user for Moodle should
1) have `SOAP` and `LOGIN` rights (others should be removed)
2) should be assigned to any group
if you do not assign a group, the following message is displayed:
Warning
User added but you need to assign this user to a usergroup, otherwise they won't be able to log in
And, the plug in will not work, so, to start, assign it to the default group, then after creation of the room in moodle, a new group is created, 'moodle' you can move that user to 'moodle' group.
3) should have type `USER`
I guess that's it :)
On Sun, 8 Nov 2020 at 16:56, <ol...@landshut.org> wrote:
Hello everyone,
I have just installed an OpenMeetings server 5.0.1 under Debian 10 and would like to make it available in Moodle via the PlugIn. Can someone please tell me what to enter here (soap user, user group, ...):
Best regards,
Oliver Neumann
--
Best regards,
Maxim
Re: AW: AW: Moodle PlugIn
Posted by Ali Alhaidary <al...@the5stars.org>.
Hi Oliver, I could not reproduce it, added few users on our live system
and it acted as expected even when making mistakes :-)
When asked for password (Check password), you should put the admin password.
As Max suggested, share openmeetings.log file please...
Ali
On 12/15/20 5:38 AM, Maxim Solodovnik wrote:
> please share correspondent part of openmeetings.log (you can mask
> almost everything in the log :)))
>
> On Tue, 15 Dec 2020 at 01:39, <oliver.neumann@landshut.org
> <ma...@landshut.org>> wrote:
>
> OK, i try.
>
> 1. Login as admin
>
> 2. On Dashboard i choose Administration->Users
>
> 3. I click on admin-user
>
> 4. I click on the „+“-sign and a empty mask appears
>
> 5. I fill in the cedentials
>
> 6. I click on save an password dialog appears
>
> 7. Nothing happens, no user ist added (still after i pushed the
> refresh button)
>
> Best Regards,
>
> Oliver.
>
> *Von:* Ali Alhaidary <ali.alhaidary@the5stars.org
> <ma...@the5stars.org>>
> *Gesendet:* Montag, 14. Dezember 2020 19:16
> *An:* user@openmeetings.apache.org
> <ma...@openmeetings.apache.org>
> *Betreff:* RE: AW: AW: Moodle PlugIn
>
> Hi Oliver,
>
> Can you please put in detail your steps and describing the result
> of each…
>
> علي الحيدري
>
> *From: *oliver.neumann@landshut.org
> <ma...@landshut.org>
> *Sent: *Monday, December 14, 2020 9:11 PM
> *To: *user@openmeetings.apache.org
> <ma...@openmeetings.apache.org>
> *Subject: *AW: AW: AW: Moodle PlugIn
>
> Hi Ali and Maxim,
>
> thank you for your advice, but unfortunately it doesn't work.
>
> I just waited for the new version 5.1 (thanks to Alvaro), but the
> same behavior is evident. After I have filled out the form fields
> and clicked Save, I am asked for the admin password and then the
> new user is not created. What am I doing wrong?
>
> Best regards, Oliver
>
> *Von:* Ali Alhaidary <ali.alhaidary@the5stars.org
> <ma...@the5stars.org>>
> *Gesendet:* Dienstag, 10. November 2020 12:10
> *An:* user@openmeetings.apache.org
> <ma...@openmeetings.apache.org>
> *Betreff:* Re: AW: AW: Moodle PlugIn
>
> This will happen if you click '+' immediately after entering the
> 'users' screen, I think a jira should be raised, however, if you
> follow:
>
> 1. Login: Dashboard will be displayed.
> 2. Administration --> USERS : The users list screen will be displayed
> 3. click on any of the users: That user information will be displayed.
> 4. click on the '+' icon: a new and empty record will be created.
> 5. Fill in information and click 'save' icon.
>
> On 11/9/20 10:40 PM, oliver.neumann@landshut.org
> <ma...@landshut.org> wrote:
>
> Hi,
>
> that makes no difference. When I first click +, the messages
> "'Email address' is required." and "'Login' is required." pop up.
>
> Best regarts,
>
> Oliver.
>
> *Von:* Ali Alhaidary <al...@the5stars.org>
> <ma...@the5stars.org>
> *Gesendet:* Montag, 9. November 2020 19:50
> *An:* user@openmeetings.apache.org
> <ma...@openmeetings.apache.org>
> *Betreff:* Re: AW: Moodle PlugIn
>
> Hi,
>
> Did you click on add user "+" first?
>
> On 11/9/20 9:19 PM, oliver.neumann@landshut.org
> <ma...@landshut.org> wrote:
>
> Hello Ali,
>
> hello Maxim,
>
> thank you for your answer. I followed your suggestion, but
> immidiately after i pushed the save-button, the new
> soapuser was not added and the formularmask remains in the
> original state after pushing teh refresh-button (see below).
>
> Best regards,
>
> Oliver.
>
> *Von:* Ali Alhaidary <al...@the5stars.org>
> <ma...@the5stars.org>
> *Gesendet:* Sonntag, 8. November 2020 14:15
> *An:* user@openmeetings.apache.org
> <ma...@openmeetings.apache.org>
> *Betreff:* Re: Moodle PlugIn
>
> On 11/8/20 3:21 PM, Maxim Solodovnik wrote:
>
> Hello Oliver,
>
> soap user for Moodle should
>
> 1) have `SOAP` and `LOGIN` rights (others should be
> removed)
>
> 2) should be assigned to any group
>
> if you do not assign a group, the following message is
> displayed:
>
>
> Warning
>
> User added but you need to assign this user to a
> usergroup, otherwise they won't be able to log in
>
> And, the plug in will not work, so, to start, assign it to
> the default group, then after creation of the room in
> moodle, a new group is created, 'moodle' you can move that
> user to 'moodle' group.
>
> 3) should have type `USER`
>
> I guess that's it :)
>
> On Sun, 8 Nov 2020 at 16:56,
> <oliver.neumann@landshut.org
> <ma...@landshut.org>> wrote:
>
> Hello everyone,
>
> I have just installed an OpenMeetings server 5.0.1
> under Debian 10 and would like to make it
> available in Moodle via the PlugIn. Can someone
> please tell me what to enter here (soap user, user
> group, ...):
>
> Best regards,
>
> Oliver Neumann
>
>
> --
>
> Best regards,
> Maxim
>
>
>
> --
> Best regards,
> Maxim
Re: AW: AW: Moodle PlugIn
Posted by Maxim Solodovnik <so...@gmail.com>.
please share correspondent part of openmeetings.log (you can mask almost
everything in the log :)))
On Tue, 15 Dec 2020 at 01:39, <ol...@landshut.org> wrote:
> OK, i try.
>
>
>
> 1. Login as admin
>
>
> 1. On Dashboard i choose Administration->Users
>
>
> 1. I click on admin-user
>
>
> 1. I click on the „+“-sign and a empty mask appears
>
>
> 1. I fill in the cedentials
>
>
> 1. I click on save an password dialog appears
>
>
> 1. Nothing happens, no user ist added (still after i pushed the
> refresh button)
>
> Best Regards,
>
> Oliver.
>
>
>
>
>
> *Von:* Ali Alhaidary <al...@the5stars.org>
> *Gesendet:* Montag, 14. Dezember 2020 19:16
> *An:* user@openmeetings.apache.org
> *Betreff:* RE: AW: AW: Moodle PlugIn
>
>
>
> Hi Oliver,
>
> Can you please put in detail your steps and describing the result of each…
>
>
>
> علي الحيدري
>
>
>
> *From: *oliver.neumann@landshut.org
> *Sent: *Monday, December 14, 2020 9:11 PM
> *To: *user@openmeetings.apache.org
> *Subject: *AW: AW: AW: Moodle PlugIn
>
>
>
> Hi Ali and Maxim,
>
>
>
> thank you for your advice, but unfortunately it doesn't work.
>
>
>
> I just waited for the new version 5.1 (thanks to Alvaro), but the same
> behavior is evident. After I have filled out the form fields and clicked
> Save, I am asked for the admin password and then the new user is not
> created. What am I doing wrong?
>
>
>
>
>
> Best regards, Oliver
>
>
>
> *Von:* Ali Alhaidary <al...@the5stars.org>
> *Gesendet:* Dienstag, 10. November 2020 12:10
> *An:* user@openmeetings.apache.org
> *Betreff:* Re: AW: AW: Moodle PlugIn
>
>
>
> This will happen if you click '+' immediately after entering the 'users'
> screen, I think a jira should be raised, however, if you follow:
>
> 1. Login: Dashboard will be displayed.
> 2. Administration --> USERS : The users list screen will be displayed
> 3. click on any of the users: That user information will be displayed.
> 4. click on the '+' icon: a new and empty record will be created.
> 5. Fill in information and click 'save' icon.
>
> On 11/9/20 10:40 PM, oliver.neumann@landshut.org wrote:
>
> Hi,
>
>
>
> that makes no difference. When I first click +, the messages "'Email
> address' is required." and "'Login' is required." pop up.
>
>
>
> Best regarts,
>
>
>
> Oliver.
>
>
>
> *Von:* Ali Alhaidary <al...@the5stars.org>
> <al...@the5stars.org>
> *Gesendet:* Montag, 9. November 2020 19:50
> *An:* user@openmeetings.apache.org
> *Betreff:* Re: AW: Moodle PlugIn
>
>
>
> Hi,
>
> Did you click on add user "+" first?
>
>
>
> On 11/9/20 9:19 PM, oliver.neumann@landshut.org wrote:
>
> Hello Ali,
>
> hello Maxim,
>
>
>
> thank you for your answer. I followed your suggestion, but immidiately
> after i pushed the save-button, the new soapuser was not added and the
> formularmask remains in the original state after pushing teh refresh-button
> (see below).
>
> Best regards,
>
>
>
> Oliver.
>
>
>
>
>
> *Von:* Ali Alhaidary <al...@the5stars.org>
> <al...@the5stars.org>
> *Gesendet:* Sonntag, 8. November 2020 14:15
> *An:* user@openmeetings.apache.org
> *Betreff:* Re: Moodle PlugIn
>
>
>
>
>
> On 11/8/20 3:21 PM, Maxim Solodovnik wrote:
>
> Hello Oliver,
>
>
>
> soap user for Moodle should
>
> 1) have `SOAP` and `LOGIN` rights (others should be removed)
>
> 2) should be assigned to any group
>
> if you do not assign a group, the following message is displayed:
>
> Warning
>
> User added but you need to assign this user to a usergroup, otherwise
> they won't be able to log in
>
>
>
> And, the plug in will not work, so, to start, assign it to the default
> group, then after creation of the room in moodle, a new group is created,
> 'moodle' you can move that user to 'moodle' group.
>
>
>
> 3) should have type `USER`
>
>
>
> I guess that's it :)
>
>
>
> On Sun, 8 Nov 2020 at 16:56, <ol...@landshut.org> wrote:
>
> Hello everyone,
>
>
>
> I have just installed an OpenMeetings server 5.0.1 under Debian 10 and
> would like to make it available in Moodle via the PlugIn. Can someone
> please tell me what to enter here (soap user, user group, ...):
>
>
>
>
>
> Best regards,
>
>
>
> Oliver Neumann
>
>
>
>
>
>
> --
>
> Best regards,
> Maxim
>
>
>
--
Best regards,
Maxim
AW: AW: AW: Moodle PlugIn
Posted by ol...@landshut.org.
OK, i try.
1. Login as admin
2. On Dashboard i choose Administration->Users
3. I click on admin-user
4. I click on the „+“-sign and a empty mask appears
5. I fill in the cedentials
6. I click on save an password dialog appears
7. Nothing happens, no user ist added (still after i pushed the refresh button)
Best Regards,
Oliver.
Von: Ali Alhaidary <al...@the5stars.org>
Gesendet: Montag, 14. Dezember 2020 19:16
An: user@openmeetings.apache.org
Betreff: RE: AW: AW: Moodle PlugIn
Hi Oliver,
Can you please put in detail your steps and describing the result of each…
علي الحيدري
From: oliver.neumann@landshut.org <ma...@landshut.org>
Sent: Monday, December 14, 2020 9:11 PM
To: user@openmeetings.apache.org <ma...@openmeetings.apache.org>
Subject: AW: AW: AW: Moodle PlugIn
Hi Ali and Maxim,
thank you for your advice, but unfortunately it doesn't work.
I just waited for the new version 5.1 (thanks to Alvaro), but the same behavior is evident. After I have filled out the form fields and clicked Save, I am asked for the admin password and then the new user is not created. What am I doing wrong?
Best regards, Oliver
Von: Ali Alhaidary <ali.alhaidary@the5stars.org <ma...@the5stars.org> >
Gesendet: Dienstag, 10. November 2020 12:10
An: user@openmeetings.apache.org <ma...@openmeetings.apache.org>
Betreff: Re: AW: AW: Moodle PlugIn
This will happen if you click '+' immediately after entering the 'users' screen, I think a jira should be raised, however, if you follow:
1. Login: Dashboard will be displayed.
2. Administration --> USERS : The users list screen will be displayed
3. click on any of the users: That user information will be displayed.
4. click on the '+' icon: a new and empty record will be created.
5. Fill in information and click 'save' icon.
On 11/9/20 10:40 PM, oliver.neumann@landshut.org <ma...@landshut.org> wrote:
Hi,
that makes no difference. When I first click +, the messages "'Email address' is required." and "'Login' is required." pop up.
Best regarts,
Oliver.
Von: Ali Alhaidary <ma...@the5stars.org> <al...@the5stars.org>
Gesendet: Montag, 9. November 2020 19:50
An: user@openmeetings.apache.org <ma...@openmeetings.apache.org>
Betreff: Re: AW: Moodle PlugIn
Hi,
Did you click on add user "+" first?
On 11/9/20 9:19 PM, oliver.neumann@landshut.org <ma...@landshut.org> wrote:
Hello Ali,
hello Maxim,
thank you for your answer. I followed your suggestion, but immidiately after i pushed the save-button, the new soapuser was not added and the formularmask remains in the original state after pushing teh refresh-button (see below).
Best regards,
Oliver.
Von: Ali Alhaidary <ma...@the5stars.org> <al...@the5stars.org>
Gesendet: Sonntag, 8. November 2020 14:15
An: user@openmeetings.apache.org <ma...@openmeetings.apache.org>
Betreff: Re: Moodle PlugIn
On 11/8/20 3:21 PM, Maxim Solodovnik wrote:
Hello Oliver,
soap user for Moodle should
1) have `SOAP` and `LOGIN` rights (others should be removed)
2) should be assigned to any group
if you do not assign a group, the following message is displayed:
Warning
User added but you need to assign this user to a usergroup, otherwise they won't be able to log in
And, the plug in will not work, so, to start, assign it to the default group, then after creation of the room in moodle, a new group is created, 'moodle' you can move that user to 'moodle' group.
3) should have type `USER`
I guess that's it :)
On Sun, 8 Nov 2020 at 16:56, <oliver.neumann@landshut.org <ma...@landshut.org> > wrote:
Hello everyone,
I have just installed an OpenMeetings server 5.0.1 under Debian 10 and would like to make it available in Moodle via the PlugIn. Can someone please tell me what to enter here (soap user, user group, ...):
Best regards,
Oliver Neumann
--
Best regards,
Maxim