You are viewing a plain text version of this content. The canonical link for it is here.
Posted to builds@cassandra.apache.org by Apache Jenkins Server <je...@builds.apache.org> on 2020/10/05 12:11:08 UTC
Build complete: Cassandra-trunk #49 [FAILURE]
ba63fa3c951cb5c18d0fa4f9483577c6e18389c4
-------------------------------------------------------------------------------
Build Cassandra-trunk #49 Failure
URL: https://ci-cassandra.apache.org/job/Cassandra-trunk/49/
-------------------------------------------------------------------------------
Changes:
[Benjamin Lerer] Fix flaky test ConnectionTest.testMessagePurging
-------------------------------------------------------------------------------
Failed Tests:
14 tests failed.
FAILED: dtest-novnode.repair_tests.repair_test.TestRepair.test_simple_parallel_repair
FAILED: dtest-offheap.materialized_views_test.TestMaterializedViewsConsistency.test_multi_partition_consistent_reads_after_write
FAILED: junit.framework.TestSuite.org.apache.cassandra.streaming.LongStreamingTest
FAILED: org.apache.cassandra.concurrent.LongSharedExecutorPoolTest.testPromptnessOfExecution
FAILED: dtest-novnode.read_repair_test.TestReadRepair.test_alter_rf_and_run_read_repair
FAILED: dtest-novnode.read_repair_test.TestReadRepairGuarantees.test_atomic_writes[blocking]
FAILED: dtest-offheap.read_repair_test.TestReadRepair.test_alter_rf_and_run_read_repair
FAILED: dtest-offheap.read_repair_test.TestReadRepairGuarantees.test_atomic_writes[blocking]
FAILED: dtest.read_repair_test.TestReadRepair.test_alter_rf_and_run_read_repair
FAILED: dtest.read_repair_test.TestReadRepairGuarantees.test_atomic_writes[blocking]
FAILED: org.apache.cassandra.gms.GossiperTest.testHaveVersion3Nodes-cdc
FAILED: org.apache.cassandra.gms.GossiperTest.testHaveVersion3Nodes-compression
FAILED: org.apache.cassandra.gms.GossiperTest.testHaveVersion3Nodes
FAILED: org.apache.cassandra.hints.HintsWriteThenReadTest.testWriteReadCycle
-------------------------------------------------------------------------------
Cassandra CI Results
-------------------------------------------------------------------------------
Tests Failures Errors Skipped Success rate Time
19043 13 524 97 97.18% 156443.761
-------------------------------------------------------------------------------
Name Tests Errors Failures Skipped Time(s)
3792 523 8 0 135977.808
cqlshlib.python3.jdk8 166 0 0 0 0.000
org.apache.cassandra.audit 144 0 0 0 284.414
org.apache.cassandra.auth 108 0 0 0 63.061
org.apache.cassandra.auth.jmx 69 0 0 0 20.512
org.apache.cassandra.batchlog 36 0 0 0 82.757
org.apache.cassandra.cache 12 0 0 0 25.981
org.apache.cassandra.concurrent 29 0 1 0 399.500
org.apache.cassandra.config 72 0 0 0 7.935
org.apache.cassandra.cql.jdbc 3 0 0 0 0.233
org.apache.cassandra.cql3 719 0 0 27 1942.607
org.apache.cassandra.cql3.conditions 12 0 0 0 1.994
org.apache.cassandra.cql3.functions 93 0 0 0 48.446
org.apache.cassandra.cql3.restrictions 69 0 0 0 3.407
org.apache.cassandra.cql3.selection 30 0 0 0 46.892
org.apache.cassandra.cql3.statements 72 0 0 0 92.296
org.apache.cassandra.cql3.validation.entities 1119 0 0 3 1172.019
org.apache.cassandra.cql3.validation.miscellaneous 168 0 0 0 149.093
org.apache.cassandra.cql3.validation.operations 1194 0 0 0 1034.484
org.apache.cassandra.db 1167 0 0 2 703.093
org.apache.cassandra.db.aggregation 18 0 0 0 2.565
org.apache.cassandra.db.columniterator 3 0 0 0 10.471
org.apache.cassandra.db.commitlog 1213 0 0 7 877.434
org.apache.cassandra.db.compaction 563 0 0 6 1565.926
org.apache.cassandra.db.composites 9 0 0 0 1.515
org.apache.cassandra.db.context 24 0 0 0 6.170
org.apache.cassandra.db.filter 21 0 0 0 4.103
org.apache.cassandra.db.lifecycle 204 0 0 0 85.556
org.apache.cassandra.db.marshal 423 0 0 0 132.946
org.apache.cassandra.db.monitoring 45 0 0 0 16.254
org.apache.cassandra.db.partition 30 0 0 0 191.466
org.apache.cassandra.db.partitions 24 0 0 0 1.900
org.apache.cassandra.db.repair 69 0 0 3 61.644
org.apache.cassandra.db.rows 156 0 0 0 128.422
org.apache.cassandra.db.streaming 54 0 0 0 88.621
org.apache.cassandra.db.transform 66 0 0 0 20.417
org.apache.cassandra.db.view 12 0 0 0 63.970
org.apache.cassandra.db.virtual 39 0 0 0 82.598
org.apache.cassandra.dht 312 0 0 0 166.589
org.apache.cassandra.dht.tokenallocator 9 0 0 1 232.804
org.apache.cassandra.diag 18 0 0 0 2.696
org.apache.cassandra.diag.store 18 0 0 0 0.232
org.apache.cassandra.distributed.test 359 0 0 12 3268.928
org.apache.cassandra.distributed.upgrade 4 0 0 0 252.874
org.apache.cassandra.fql 105 0 0 0 29.906
org.apache.cassandra.fqltool 25 0 0 0 5.128
org.apache.cassandra.gms 48 0 3 0 56.925
org.apache.cassandra.hints 112 0 1 0 708.638
org.apache.cassandra.index 135 0 0 0 170.968
org.apache.cassandra.index.internal 81 0 0 0 72.342
org.apache.cassandra.index.sasi 123 0 0 0 127.420
org.apache.cassandra.index.sasi.analyzer 75 0 0 0 3.936
org.apache.cassandra.index.sasi.conf 42 0 0 0 2.986
org.apache.cassandra.index.sasi.disk 84 0 0 0 108.139
org.apache.cassandra.index.sasi.plan 24 0 0 0 14.331
org.apache.cassandra.index.sasi.utils 156 0 0 0 9.509
org.apache.cassandra.io 15 0 0 0 59.170
org.apache.cassandra.io.compress 138 0 0 0 60.330
org.apache.cassandra.io.sstable 379 0 0 6 865.024
org.apache.cassandra.io.sstable.format 3 0 0 0 6.805
org.apache.cassandra.io.sstable.format.big 6 0 0 0 10.917
org.apache.cassandra.io.sstable.metadata 30 0 0 0 3.328
org.apache.cassandra.io.util 399 0 0 0 137.958
org.apache.cassandra.locator 211 0 0 0 352.831
org.apache.cassandra.metrics 195 0 0 3 186.070
org.apache.cassandra.net 466 0 0 0 652.868
org.apache.cassandra.net.proxy 9 0 0 0 2.423
org.apache.cassandra.repair 105 0 0 3 130.767
org.apache.cassandra.repair.asymmetric 39 0 0 0 3.223
org.apache.cassandra.repair.consistent 207 0 0 3 60.346
org.apache.cassandra.repair.consistent.admin 15 0 0 0 10.314
org.apache.cassandra.repair.messages 54 0 0 0 7.725
org.apache.cassandra.schema 99 0 0 3 56.832
org.apache.cassandra.security 78 0 0 0 10.976
org.apache.cassandra.serializers 99 0 0 0 1.675
org.apache.cassandra.service 384 0 0 3 406.663
org.apache.cassandra.service.pager 21 0 0 0 3.023
org.apache.cassandra.service.reads 357 0 0 3 32.292
org.apache.cassandra.service.reads.repair 102 0 0 3 59.360
org.apache.cassandra.streaming 30 1 0 0 66.800
org.apache.cassandra.streaming.async 54 0 0 0 8.970
org.apache.cassandra.streaming.compression 18 0 0 0 3.449
org.apache.cassandra.streaming.messages 3 0 0 0 0.267
org.apache.cassandra.stress.generate 6 0 0 0 0.206
org.apache.cassandra.stress.settings 8 0 0 0 0.848
org.apache.cassandra.stress.util 5 0 0 0 0.072
org.apache.cassandra.tools 333 0 0 0 430.240
org.apache.cassandra.tools.cassandrastress 3 0 0 0 43.558
org.apache.cassandra.tools.cqlsh 3 0 0 0 39.599
org.apache.cassandra.tools.nodetool.formatter 18 0 0 0 0.236
org.apache.cassandra.tools.nodetool.stats 24 0 0 0 1.168
org.apache.cassandra.tracing 18 0 0 0 3.023
org.apache.cassandra.transport 162 0 0 0 328.482
org.apache.cassandra.transport.frame.checksum 18 0 0 0 122.421
org.apache.cassandra.transport.messages 6 0 0 0 2.158
org.apache.cassandra.triggers 60 0 0 0 33.996
org.apache.cassandra.utils 557 0 0 6 1359.276
org.apache.cassandra.utils.binlog 63 0 0 0 65.876
org.apache.cassandra.utils.btree 120 0 0 0 2.369
org.apache.cassandra.utils.concurrent 189 0 0 3 21.545
org.apache.cassandra.utils.memory 100 0 0 0 146.774
org.apache.cassandra.utils.obs 12 0 0 0 1.475
org.apache.cassandra.utils.streamhist 33 0 0 0 6.426
org.apache.cassandra.utils.vint 12 0 0 0 0.746
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Packages
-------------------------------------------------------------------------------
Name Tests Errors Failures Skipped Time(s)
Cassandra dtests 4 0 0 411.601
Cassandra dtests 2 0 0 407.609
Cassandra dtests 5 0 0 1138.478
Cassandra dtests 5 0 0 913.345
Cassandra dtests 7 0 0 797.952
Cassandra dtests 6 0 0 905.689
Cassandra dtests 4 0 0 618.940
Cassandra dtests 23 5 0 483.700
Cassandra dtests 20 3 0 775.806
Cassandra dtests 21 3 0 668.330
Cassandra dtests 22 4 0 951.687
Cassandra dtests 20 2 0 637.867
Cassandra dtests 20 2 0 807.084
Cassandra dtests 19 1 0 1198.249
Cassandra dtests 20 2 0 992.678
Cassandra dtests 19 2 0 641.051
Cassandra dtests 19 3 0 547.541
Cassandra dtests 19 2 0 647.584
Cassandra dtests 21 3 0 444.750
Cassandra dtests 18 2 0 495.285
Cassandra dtests 19 2 0 741.893
Cassandra dtests 19 2 0 621.191
Cassandra dtests 19 1 0 851.206
Cassandra dtests 20 2 0 626.393
Cassandra dtests 20 2 0 889.220
Cassandra dtests 19 2 0 1060.597
Cassandra dtests 20 3 0 664.821
Cassandra dtests 19 2 0 718.654
Cassandra dtests 17 2 0 481.853
Cassandra dtests 23 5 0 455.383
Cassandra dtests 19 3 0 544.124
Cassandra dtests 19 2 0 570.603
Cassandra dtests 20 3 0 513.891
Cassandra dtests 21 4 0 396.560
Cassandra dtests 21 4 0 505.285
Cassandra dtests 18 2 0 508.276
Cassandra dtests 19 2 0 849.684
Cassandra dtests 18 2 1 1004.966
Cassandra dtests 21 4 0 948.972
Cassandra dtests 21 3 0 1004.437
Cassandra dtests 21 3 0 492.444
Cassandra dtests 19 2 0 770.253
Cassandra dtests 20 3 0 798.686
Cassandra dtests 20 3 0 1109.542
Cassandra dtests 19 3 0 923.987
Cassandra dtests 21 3 0 1013.756
Cassandra dtests 20 2 0 727.573
Cassandra dtests 20 2 0 1010.262
Cassandra dtests 20 2 0 1324.502
Cassandra dtests 20 2 0 1698.575
Cassandra dtests 21 3 0 1064.218
Cassandra dtests 22 4 0 492.931
Cassandra dtests 22 4 0 616.052
Cassandra dtests 19 1 0 814.205
Cassandra dtests 20 2 0 918.549
Cassandra dtests 20 2 0 587.077
Cassandra dtests 19 2 0 894.275
Cassandra dtests 21 3 0 848.828
Cassandra dtests 21 3 0 538.577
Cassandra dtests 21 3 0 648.400
Cassandra dtests 21 3 0 889.394
Cassandra dtests 22 4 0 559.990
Cassandra dtests 21 3 0 590.402
Cassandra dtests 22 4 1 516.977
Cassandra dtests 23 5 0 447.811
Cassandra dtests 21 3 0 511.135
Cassandra dtests 23 5 0 327.567
Cassandra dtests 20 2 0 562.462
Cassandra dtests 21 3 0 702.570
Cassandra dtests 19 2 1 583.616
Cassandra dtests 20 3 0 574.608
Cassandra dtests 19 1 0 951.528
Cassandra dtests 19 2 1 1387.163
Cassandra dtests 20 3 0 538.688
Cassandra dtests 20 3 0 549.405
Cassandra dtests 22 5 0 654.668
Cassandra dtests 19 3 0 637.446
Cassandra dtests 20 5 0 382.237
Cassandra dtests 18 3 0 450.534
Cassandra dtests 20 3 0 545.764
Cassandra dtests 21 4 0 645.896
Cassandra dtests 22 5 0 399.507
Cassandra dtests 20 2 0 787.531
Cassandra dtests 21 4 0 357.953
Cassandra dtests 20 3 0 561.593
Cassandra dtests 20 3 0 644.121
Cassandra dtests 19 2 0 651.393
Cassandra dtests 21 4 0 608.554
Cassandra dtests 18 2 0 502.448
Cassandra dtests 18 2 0 597.275
Cassandra dtests 18 2 0 600.888
Cassandra dtests 18 2 0 569.281
Cassandra dtests 17 2 0 436.075
Cassandra dtests 17 1 0 690.935
Cassandra dtests 17 2 0 739.171
Cassandra dtests 17 2 0 501.222
Cassandra dtests 17 2 0 532.798
Cassandra dtests 18 2 0 941.455
Cassandra dtests 18 2 0 627.936
Cassandra dtests 20 3 0 659.481
Cassandra dtests 20 4 0 523.402
Cassandra dtests 17 1 0 1078.840
Cassandra dtests 19 3 0 829.340
Cassandra dtests 20 3 0 747.872
Cassandra dtests 17 2 0 313.609
Cassandra dtests 21 4 0 649.942
Cassandra dtests 19 2 0 523.307
Cassandra dtests 20 3 0 458.207
Cassandra dtests 20 3 0 626.796
Cassandra dtests 20 3 0 962.430
Cassandra dtests 20 3 0 665.908
Cassandra dtests 19 2 0 662.210
Cassandra dtests 19 2 0 732.946
Cassandra dtests 19 2 0 682.427
Cassandra dtests 19 2 0 626.399
Cassandra dtests 16 1 0 421.194
Cassandra dtests 19 2 1 648.509
Cassandra dtests 21 4 0 549.836
Cassandra dtests 20 3 0 798.211
Cassandra dtests 20 3 0 596.032
Cassandra dtests 19 2 0 662.701
Cassandra dtests 19 2 0 819.007
Cassandra dtests 19 2 0 989.022
Cassandra dtests 21 4 0 1044.142
Cassandra dtests 20 3 0 943.674
Cassandra dtests 21 4 0 504.791
Cassandra dtests 19 3 0 491.039
Cassandra dtests 20 3 0 796.367
Cassandra dtests 19 2 0 795.041
Cassandra dtests 21 4 1 753.783
Cassandra dtests 21 4 0 504.034
Cassandra dtests 19 2 0 922.215
Cassandra dtests 19 3 0 514.587
Cassandra dtests 19 3 0 640.458
Cassandra dtests 18 2 0 295.448
Cassandra dtests 20 2 0 1001.647
Cassandra dtests 18 1 0 622.212
Cassandra dtests 20 3 0 453.279
Cassandra dtests 20 3 0 513.147
Cassandra dtests 22 5 0 692.098
Cassandra dtests 19 3 0 595.252
Cassandra dtests 18 3 0 509.993
Cassandra dtests 19 4 0 320.574
Cassandra dtests 20 3 0 710.729
Cassandra dtests 21 4 0 725.281
Cassandra dtests 21 4 0 425.469
Cassandra dtests 19 1 0 938.570
Cassandra dtests 22 5 0 326.579
Cassandra dtests 20 3 0 600.013
Cassandra dtests 21 4 0 473.813
Cassandra dtests 19 2 0 696.406
Cassandra dtests 20 3 0 703.379
Cassandra dtests 19 3 0 551.834
Cassandra dtests 18 2 0 617.115
Cassandra dtests 18 2 0 582.415
Cassandra dtests 18 2 0 606.947
Cassandra dtests 18 2 0 610.790
Cassandra dtests 19 2 0 630.637
Cassandra dtests 16 2 0 449.862
Cassandra dtests 17 2 0 775.104
Cassandra dtests 18 2 0 641.959
Cassandra dtests 17 2 0 854.144
Cassandra dtests 18 2 0 729.321
Cassandra dtests 20 3 0 772.619
Cassandra dtests 20 4 0 426.337
Cassandra dtests 18 2 0 1018.701
Cassandra dtests 18 2 0 875.742
Cassandra dtests 20 3 0 703.779
Cassandra dtests 17 2 0 419.399
Cassandra dtests 20 3 0 709.739
Cassandra dtests 20 3 0 482.618
Cassandra dtests 19 2 0 489.253
Cassandra dtests 20 3 0 642.309
Cassandra dtests 20 3 0 1036.821
Cassandra dtests 21 4 0 584.710
Cassandra dtests 19 2 0 516.012
Cassandra dtests 19 2 0 751.037
Cassandra dtests 19 2 0 807.316
Cassandra dtests 19 2 0 673.431
Cassandra dtests 16 1 0 471.384
Cassandra dtests 19 2 1 801.953
Cassandra dtests 21 4 0 555.056
Cassandra dtests 19 2 0 743.393
Cassandra dtests 20 3 0 706.277
Cassandra dtests 20 3 0 614.160
Cassandra dtests 19 2 0 728.547
Cassandra dtests 19 2 0 663.948
Cassandra dtests 21 4 0 774.297
Cassandra dtests 20 3 0 1060.703
Cassandra dtests 21 4 0 995.441
Cassandra dtests 19 3 0 545.479
Cassandra dtests 21 4 0 493.953
Cassandra dtests 19 2 0 786.909
Cassandra dtests 21 4 1 784.383
Cassandra dtests 20 3 0 800.182
Cassandra dtests 19 2 0 641.236
Cassandra dtests 18 2 0 706.832
Cassandra dtests 19 3 0 590.665
Cassandra dtests 19 3 0 315.487
-------------------------------------------------------------------------------
cqlshlib.python3.jdk8
Name Tests Errors Failures Skipped Time(s)
no_cython 83 0 0 NaN
cython 83 0 0 NaN
-------------------------------------------------------------------------------
org.apache.cassandra.audit
Name Tests Errors Failures Skipped Time(s)
AuditLogFilterTest-cdc 10 0 0 0 0.211
AuditLoggerAuthTest-cdc 9 0 0 0 53.930
AuditLoggerTest-cdc 28 0 0 0 26.064
BinAuditLoggerTest-cdc 1 0 0 0 14.270
AuditLogFilterTest-compression 10 0 0 0 0.261
AuditLoggerAuthTest-compression 9 0 0 0 53.669
AuditLoggerTest-compression 28 0 0 0 28.300
BinAuditLoggerTest-compression 1 0 0 0 15.302
AuditLogFilterTest 10 0 0 0 0.254
AuditLoggerAuthTest 9 0 0 0 53.064
AuditLoggerTest 28 0 0 0 23.050
BinAuditLoggerTest 1 0 0 0 16.039
-------------------------------------------------------------------------------
org.apache.cassandra.auth
Name Tests Errors Failures Skipped Time(s)
AuthCacheTest-cdc 14 0 0 0 0.598
CassandraNetworkAuthorizerTest-cdc 6 0 0 0 4.665
CassandraRoleManagerTest-cdc 1 0 0 0 4.084
PasswordAuthenticatorTest-cdc 7 0 0 0 7.428
RoleOptionsTest-cdc 4 0 0 0 0.440
RolesTest-cdc 4 0 0 0 3.968
AuthCacheTest-compression 14 0 0 0 0.624
CassandraNetworkAuthorizerTest- 6 0 0 0 5.053
compression
CassandraRoleManagerTest-compression 1 0 0 0 3.579
PasswordAuthenticatorTest-compression 7 0 0 0 5.582
RoleOptionsTest-compression 4 0 0 0 0.423
RolesTest-compression 4 0 0 0 3.375
AuthCacheTest 14 0 0 0 0.670
CassandraNetworkAuthorizerTest 6 0 0 0 4.999
CassandraRoleManagerTest 1 0 0 0 4.504
PasswordAuthenticatorTest 7 0 0 0 7.831
RoleOptionsTest 4 0 0 0 0.646
RolesTest 4 0 0 0 4.592
-------------------------------------------------------------------------------
org.apache.cassandra.auth.jmx
Name Tests Errors Failures Skipped Time(s)
AuthorizationProxyTest-cdc 20 0 0 0 1.199
JMXAuthTest-cdc 3 0 0 0 5.665
AuthorizationProxyTest-compression 20 0 0 0 1.129
JMXAuthTest-compression 3 0 0 0 4.796
AuthorizationProxyTest 20 0 0 0 1.636
JMXAuthTest 3 0 0 0 6.087
-------------------------------------------------------------------------------
org.apache.cassandra.batchlog
Name Tests Errors Failures Skipped Time(s)
BatchlogEndpointFilterTest-cdc 5 0 0 0 0.418
BatchlogManagerTest-cdc 6 0 0 0 23.433
BatchlogTest-cdc 1 0 0 0 3.101
BatchlogEndpointFilterTest-compression 5 0 0 0 0.494
BatchlogManagerTest-compression 6 0 0 0 23.802
BatchlogTest-compression 1 0 0 0 3.357
BatchlogEndpointFilterTest 5 0 0 0 0.502
BatchlogManagerTest 6 0 0 0 24.156
BatchlogTest 1 0 0 0 3.494
-------------------------------------------------------------------------------
org.apache.cassandra.cache
Name Tests Errors Failures Skipped Time(s)
AutoSavingCacheTest-cdc 2 0 0 0 3.525
CacheProviderTest-cdc 2 0 0 0 4.345
AutoSavingCacheTest-compression 2 0 0 0 3.815
CacheProviderTest-compression 2 0 0 0 5.386
AutoSavingCacheTest 2 0 0 0 4.004
CacheProviderTest 2 0 0 0 4.906
-------------------------------------------------------------------------------
org.apache.cassandra.concurrent
Name Tests Errors Failures Skipped Time(s)
LongOpOrderTest 1 0 0 0 330.615
LongSharedExecutorPoolTest 1 0 1 0 0.715
DebuggableScheduledThreadPoolExecutorTest- 1 0 0 0 15.094
cdc
DebuggableThreadPoolExecutorTest-cdc 4 0 0 0 1.332
SEPExecutorTest-cdc 2 0 0 0 4.728
WaitQueueTest-cdc 2 0 0 0 0.235
DebuggableScheduledThreadPoolExecutorTest- 1 0 0 0 15.036
compression
DebuggableThreadPoolExecutorTest- 4 0 0 0 1.437
compression
SEPExecutorTest-compression 2 0 0 0 7.183
WaitQueueTest-compression 2 0 0 0 0.285
DebuggableScheduledThreadPoolExecutorTest 1 0 0 0 15.034
DebuggableThreadPoolExecutorTest 4 0 0 0 1.793
SEPExecutorTest 2 0 0 0 5.755
WaitQueueTest 2 0 0 0 0.258
-------------------------------------------------------------------------------
org.apache.cassandra.config
Name Tests Errors Failures Skipped Time(s)
CassandraRelevantPropertiesTest-cdc 8 0 0 0 0.161
DatabaseDescriptorRefTest-cdc 1 0 0 0 1.287
DatabaseDescriptorTest-cdc 15 0 0 0 0.914
CassandraRelevantPropertiesTest- 8 0 0 0 0.171
compression
DatabaseDescriptorRefTest-compression 1 0 0 0 1.577
DatabaseDescriptorTest-compression 15 0 0 0 1.110
CassandraRelevantPropertiesTest 8 0 0 0 0.163
DatabaseDescriptorRefTest 1 0 0 0 1.429
DatabaseDescriptorTest 15 0 0 0 1.123
-------------------------------------------------------------------------------
org.apache.cassandra.cql.jdbc
Name Tests Errors Failures Skipped Time(s)
JdbcDecimalTest-cdc 1 0 0 0 0.068
JdbcDecimalTest-compression 1 0 0 0 0.083
JdbcDecimalTest 1 0 0 0 0.082
-------------------------------------------------------------------------------
org.apache.cassandra.cql3
Name Tests Errors Failures Skipped Time(s)
CorruptionTest 1 0 0 0 126.296
ManyRowsTest 2 0 0 0 9.572
ViewLongTest 5 0 0 0 107.227
CDCStatementTest-cdc 3 0 0 0 5.047
CQL3TypeLiteralTest-cdc 6 0 0 0 1.135
ColumnIdentifierTest-cdc 4 0 0 0 0.447
CqlParserTest-cdc 3 0 0 0 0.396
CustomNowInSecondsTest-cdc 4 0 0 0 16.024
DeleteTest-cdc 1 0 0 0 16.638
DistinctQueryPagingTest-cdc 5 0 0 0 16.981
DurationTest-cdc 8 0 0 0 0.117
EmptyValuesTest-cdc 14 0 0 5 44.383
ErrorCollectorTest-cdc 6 0 0 0 0.085
GcCompactionTest-cdc 8 0 0 0 12.395
IndexQueryPagingTest-cdc 5 0 0 0 16.601
KeyCacheCqlTest-cdc 10 0 0 0 23.237
ListsTest-cdc 6 0 0 0 5.819
NonNativeTimestampTest-cdc 1 0 0 0 3.712
OutOfSpaceTest-cdc 3 0 0 0 4.837
PagingQueryTest-cdc 1 0 0 0 25.766
PagingTest-cdc 1 0 0 0 11.019
PreparedStatementsTest-cdc 10 0 0 0 24.285
PstmtPersistenceTest-cdc 2 0 0 0 15.124
QueryEventsTest-cdc 4 0 0 0 16.237
QueryWithIndexedSSTableTest-cdc 1 0 0 0 4.415
ReservedKeywordsTest-cdc 1 0 0 0 0.927
SerializationMirrorTest-cdc 1 0 0 0 3.880
SimpleQueryTest-cdc 18 0 0 0 12.533
TombstonesWithIndexedSSTableTest-cdc 2 0 0 0 5.803
TraceCqlTest-cdc 1 0 0 0 13.386
UDHelperTest-cdc 3 0 0 0 0.430
ViewComplexTest-cdc 32 0 0 1 113.371
ViewFilteringTest-cdc 25 0 0 3 58.679
ViewSchemaTest-cdc 7 0 0 0 27.562
ViewTest-cdc 41 0 0 0 77.745
CDCStatementTest-compression 3 0 0 0 4.805
CQL3TypeLiteralTest-compression 6 0 0 0 1.131
ColumnIdentifierTest-compression 4 0 0 0 0.489
CqlParserTest-compression 3 0 0 0 0.503
CustomNowInSecondsTest-compression 4 0 0 0 15.132
DeleteTest-compression 1 0 0 0 17.291
DistinctQueryPagingTest-compression 5 0 0 0 16.135
DurationTest-compression 8 0 0 0 0.102
EmptyValuesTest-compression 14 0 0 5 44.120
ErrorCollectorTest-compression 6 0 0 0 0.090
GcCompactionTest-compression 8 0 0 0 11.309
IndexQueryPagingTest-compression 5 0 0 0 16.295
KeyCacheCqlTest-compression 10 0 0 0 21.887
ListsTest-compression 6 0 0 0 5.829
NonNativeTimestampTest-compression 1 0 0 0 3.522
OutOfSpaceTest-compression 3 0 0 0 4.592
PagingQueryTest-compression 1 0 0 0 24.624
PagingTest-compression 1 0 0 0 11.819
PreparedStatementsTest-compression 10 0 0 0 21.316
PstmtPersistenceTest-compression 2 0 0 0 17.908
QueryEventsTest-compression 4 0 0 0 14.973
QueryWithIndexedSSTableTest-compression 1 0 0 0 5.586
ReservedKeywordsTest-compression 1 0 0 0 0.962
SerializationMirrorTest-compression 1 0 0 0 3.665
SimpleQueryTest-compression 18 0 0 0 9.664
TombstonesWithIndexedSSTableTest- 2 0 0 0 5.860
compression
TraceCqlTest-compression 1 0 0 0 13.420
UDHelperTest-compression 3 0 0 0 0.366
ViewComplexTest-compression 32 0 0 1 104.753
ViewFilteringTest-compression 25 0 0 3 48.370
ViewSchemaTest-compression 7 0 0 0 38.214
ViewTest-compression 41 0 0 0 69.522
CDCStatementTest 3 0 0 0 5.302
CQL3TypeLiteralTest 6 0 0 0 1.176
ColumnIdentifierTest 4 0 0 0 0.627
CqlParserTest 3 0 0 0 0.440
CustomNowInSecondsTest 4 0 0 0 14.834
DeleteTest 1 0 0 0 26.519
DistinctQueryPagingTest 5 0 0 0 19.835
DurationTest 8 0 0 0 0.101
EmptyValuesTest 14 0 0 5 50.168
ErrorCollectorTest 6 0 0 0 0.116
GcCompactionTest 8 0 0 0 12.484
IndexQueryPagingTest 5 0 0 0 15.297
KeyCacheCqlTest 10 0 0 0 25.732
ListsTest 6 0 0 0 5.053
NonNativeTimestampTest 1 0 0 0 3.820
OutOfSpaceTest 3 0 0 0 4.315
PagingQueryTest 1 0 0 0 24.696
PagingTest 1 0 0 0 10.297
PreparedStatementsTest 10 0 0 0 21.727
PstmtPersistenceTest 2 0 0 0 15.106
QueryEventsTest 4 0 0 0 14.160
QueryWithIndexedSSTableTest 1 0 0 0 4.732
ReservedKeywordsTest 1 0 0 0 0.927
SerializationMirrorTest 1 0 0 0 3.996
SimpleQueryTest 18 0 0 0 10.312
TombstonesWithIndexedSSTableTest 2 0 0 0 6.210
TraceCqlTest 1 0 0 0 13.549
UDHelperTest 3 0 0 0 0.477
ViewComplexTest 32 0 0 1 103.635
ViewFilteringTest 25 0 0 3 58.899
ViewSchemaTest 7 0 0 0 24.165
ViewTest 41 0 0 0 67.535
-------------------------------------------------------------------------------
org.apache.cassandra.cql3.conditions
Name Tests Errors Failures Skipped Time(s)
ColumnConditionTest-cdc 4 0 0 0 0.711
ColumnConditionTest-compression 4 0 0 0 0.692
ColumnConditionTest 4 0 0 0 0.591
-------------------------------------------------------------------------------
org.apache.cassandra.cql3.functions
Name Tests Errors Failures Skipped Time(s)
CastFctsTest-cdc 7 0 0 0 8.519
OperationFctsTest-cdc 11 0 0 0 10.395
TimeFctsTest-cdc 13 0 0 0 0.586
CastFctsTest-compression 7 0 0 0 6.477
OperationFctsTest-compression 11 0 0 0 7.959
TimeFctsTest-compression 13 0 0 0 0.623
CastFctsTest 7 0 0 0 6.065
OperationFctsTest 11 0 0 0 7.293
TimeFctsTest 13 0 0 0 0.529
-------------------------------------------------------------------------------
org.apache.cassandra.cql3.restrictions
Name Tests Errors Failures Skipped Time(s)
ClusteringColumnRestrictionsTest-cdc 23 0 0 0 1.217
ClusteringColumnRestrictionsTest- 23 0 0 0 1.164
compression
ClusteringColumnRestrictionsTest 23 0 0 0 1.026
-------------------------------------------------------------------------------
org.apache.cassandra.cql3.selection
Name Tests Errors Failures Skipped Time(s)
SelectionColumnMappingTest-cdc 2 0 0 0 6.506
TermSelectionTest-cdc 8 0 0 0 9.161
SelectionColumnMappingTest-compression 2 0 0 0 6.605
TermSelectionTest-compression 8 0 0 0 12.052
SelectionColumnMappingTest 2 0 0 0 5.291
TermSelectionTest 8 0 0 0 7.277
-------------------------------------------------------------------------------
org.apache.cassandra.cql3.statements
Name Tests Errors Failures Skipped Time(s)
AlterRoleStatementTest-cdc 4 0 0 0 0.786
CreateRoleStatementTest-cdc 4 0 0 0 4.233
CreateUserStatementTest-cdc 1 0 0 0 0.831
DescribeStatementTest-cdc 12 0 0 0 20.472
PropertyDefinitionsTest-cdc 2 0 0 0 0.206
SelectStatementTest-cdc 1 0 0 0 3.343
AlterRoleStatementTest-compression 4 0 0 0 1.244
CreateRoleStatementTest-compression 4 0 0 0 5.262
CreateUserStatementTest-compression 1 0 0 0 1.149
DescribeStatementTest-compression 12 0 0 0 23.410
PropertyDefinitionsTest-compression 2 0 0 0 0.299
SelectStatementTest-compression 1 0 0 0 4.261
AlterRoleStatementTest 4 0 0 0 0.881
CreateRoleStatementTest 4 0 0 0 3.765
CreateUserStatementTest 1 0 0 0 0.869
DescribeStatementTest 12 0 0 0 17.843
PropertyDefinitionsTest 2 0 0 0 0.237
SelectStatementTest 1 0 0 0 3.205
-------------------------------------------------------------------------------
org.apache.cassandra.cql3.validation.entities
Name Tests Errors Failures Skipped Time(s)
CollectionsTest-cdc 50 0 0 0 38.746
CountersTest-cdc 7 0 0 0 6.826
DateTypeTest-cdc 1 0 0 0 3.747
FrozenCollectionsTest-cdc 34 0 0 0 21.602
JsonTest-cdc 22 0 0 0 25.780
SecondaryIndexOnMapEntriesTest-cdc 11 0 0 0 9.753
SecondaryIndexOnStaticColumnTest-cdc 6 0 0 0 8.667
SecondaryIndexTest-cdc 49 0 0 0 49.144
StaticColumnsTest-cdc 7 0 0 0 9.128
TimestampTest-cdc 8 0 0 0 19.589
TimeuuidTest-cdc 2 0 0 0 4.250
TupleTypeTest-cdc 15 0 0 0 46.180
TypeTest-cdc 4 0 0 0 5.237
UFAuthTest-cdc 26 0 0 0 19.851
UFIdentificationTest-cdc 14 0 0 1 30.776
UFJavaTest-cdc 20 0 0 0 31.828
UFPureScriptTupleCollectionTest-cdc 1 0 0 0 14.040
UFScriptTest-cdc 12 0 0 0 21.369
UFSecurityTest-cdc 2 0 0 0 7.055
UFTest-cdc 24 0 0 0 26.460
UFTypesTest-cdc 7 0 0 0 21.938
UFVerifierTest-cdc 20 0 0 0 8.595
UserTypesTest-cdc 27 0 0 0 23.341
VirtualTableTest-cdc 4 0 0 0 13.898
CollectionsTest-compression 50 0 0 0 30.552
CountersTest-compression 7 0 0 0 7.742
DateTypeTest-compression 1 0 0 0 5.120
FrozenCollectionsTest-compression 34 0 0 0 13.661
JsonTest-compression 22 0 0 0 22.335
SecondaryIndexOnMapEntriesTest- 11 0 0 0 7.529
compression
SecondaryIndexOnStaticColumnTest- 6 0 0 0 6.874
compression
SecondaryIndexTest-compression 49 0 0 0 31.649
StaticColumnsTest-compression 7 0 0 0 7.798
TimestampTest-compression 8 0 0 0 18.096
TimeuuidTest-compression 2 0 0 0 4.074
TupleTypeTest-compression 15 0 0 0 30.321
TypeTest-compression 4 0 0 0 4.655
UFAuthTest-compression 26 0 0 0 13.789
UFIdentificationTest-compression 14 0 0 1 14.866
UFJavaTest-compression 20 0 0 0 23.005
UFPureScriptTupleCollectionTest- 1 0 0 0 13.434
compression
UFScriptTest-compression 12 0 0 0 19.701
UFSecurityTest-compression 2 0 0 0 6.601
UFTest-compression 24 0 0 0 21.783
UFTypesTest-compression 7 0 0 0 18.732
UFVerifierTest-compression 20 0 0 0 6.773
UserTypesTest-compression 27 0 0 0 15.530
VirtualTableTest-compression 4 0 0 0 13.200
CollectionsTest 50 0 0 0 28.168
CountersTest 7 0 0 0 5.520
DateTypeTest 1 0 0 0 3.457
FrozenCollectionsTest 34 0 0 0 13.523
JsonTest 22 0 0 0 22.085
SecondaryIndexOnMapEntriesTest 11 0 0 0 7.479
SecondaryIndexOnStaticColumnTest 6 0 0 0 6.676
SecondaryIndexTest 49 0 0 0 32.109
StaticColumnsTest 7 0 0 0 7.930
TimestampTest 8 0 0 0 18.084
TimeuuidTest 2 0 0 0 3.960
TupleTypeTest 15 0 0 0 30.324
TypeTest 4 0 0 0 4.643
UFAuthTest 26 0 0 0 13.517
UFIdentificationTest 14 0 0 1 14.359
UFJavaTest 20 0 0 0 21.770
UFPureScriptTupleCollectionTest 1 0 0 0 12.984
UFScriptTest 12 0 0 0 17.927
UFSecurityTest 2 0 0 0 6.335
UFTest 24 0 0 0 21.644
UFTypesTest 7 0 0 0 19.150
UFVerifierTest 20 0 0 0 6.518
UserTypesTest 27 0 0 0 15.135
VirtualTableTest 4 0 0 0 13.102
-------------------------------------------------------------------------------
org.apache.cassandra.cql3.validation.miscellaneous
Name Tests Errors Failures Skipped Time(s)
CrcCheckChanceTest-cdc 3 0 0 0 7.822
OverflowTest-cdc 14 0 0 0 9.839
PgStringTest-cdc 3 0 0 0 4.935
RoleSyntaxTest-cdc 9 0 0 0 5.250
SSTableMetadataTrackingTest-cdc 7 0 0 0 6.893
SSTablesIteratedTest-cdc 14 0 0 0 11.934
TombstonesTest-cdc 6 0 0 0 8.536
CrcCheckChanceTest-compression 3 0 0 0 6.091
OverflowTest-compression 14 0 0 0 7.450
PgStringTest-compression 3 0 0 0 4.517
RoleSyntaxTest-compression 9 0 0 0 4.567
SSTableMetadataTrackingTest-compression 7 0 0 0 5.876
SSTablesIteratedTest-compression 14 0 0 0 10.562
TombstonesTest-compression 6 0 0 0 7.736
CrcCheckChanceTest 3 0 0 0 6.304
OverflowTest 14 0 0 0 7.572
PgStringTest 3 0 0 0 4.548
RoleSyntaxTest 9 0 0 0 4.655
SSTableMetadataTrackingTest 7 0 0 0 6.054
SSTablesIteratedTest 14 0 0 0 10.407
TombstonesTest 6 0 0 0 7.545
-------------------------------------------------------------------------------
org.apache.cassandra.cql3.validation.operations
Name Tests Errors Failures Skipped Time(s)
AggregationTest-cdc 50 0 0 0 43.713
AlterTest-cdc 26 0 0 0 27.321
BatchTest-cdc 11 0 0 0 50.634
CreateTest-cdc 21 0 0 0 15.444
DeleteTest-cdc 33 0 0 0 26.631
DropRecreateAndRestoreTest-cdc 4 0 0 0 5.462
DropTest-cdc 2 0 0 0 4.374
InsertTest-cdc 8 0 0 0 7.820
InsertUpdateIfConditionTest-cdc 42 0 0 0 31.065
SelectGroupByTest-cdc 7 0 0 0 21.837
SelectLimitTest-cdc 7 0 0 0 17.625
SelectMultiColumnRelationTest-cdc 22 0 0 0 14.543
SelectOrderByTest-cdc 17 0 0 0 12.581
SelectOrderedPartitionerTest-cdc 20 0 0 0 13.700
SelectSingleColumnRelationTest-cdc 23 0 0 0 16.158
SelectTest-cdc 82 0 0 0 70.961
TTLTest-cdc 7 0 0 0 15.862
TruncateTest-cdc 1 0 0 0 4.124
TuplesWithNullsComparisonTest-cdc 3 0 0 0 5.714
UpdateTest-cdc 11 0 0 0 14.168
UseTest-cdc 1 0 0 0 3.443
AggregationTest-compression 50 0 0 0 31.942
AlterTest-compression 26 0 0 0 21.264
BatchTest-compression 11 0 0 0 48.771
CreateTest-compression 21 0 0 0 10.108
DeleteTest-compression 33 0 0 0 18.341
DropRecreateAndRestoreTest-compression 4 0 0 0 4.881
DropTest-compression 2 0 0 0 3.865
InsertTest-compression 8 0 0 0 6.238
InsertUpdateIfConditionTest-compression 42 0 0 0 21.434
SelectGroupByTest-compression 7 0 0 0 19.053
SelectLimitTest-compression 7 0 0 0 16.043
SelectMultiColumnRelationTest-compression 22 0 0 0 11.061
SelectOrderByTest-compression 17 0 0 0 9.134
SelectOrderedPartitionerTest-compression 20 0 0 0 10.905
SelectSingleColumnRelationTest- 23 0 0 0 11.166
compression
SelectTest-compression 82 0 0 0 30.268
TTLTest-compression 7 0 0 0 9.193
TruncateTest-compression 1 0 0 0 3.660
TuplesWithNullsComparisonTest-compression 3 0 0 0 4.805
UpdateTest-compression 11 0 0 0 9.088
UseTest-compression 1 0 0 0 3.320
AggregationTest 50 0 0 0 31.727
AlterTest 26 0 0 0 21.532
BatchTest 11 0 0 0 48.742
CreateTest 21 0 0 0 11.488
DeleteTest 33 0 0 0 19.777
DropRecreateAndRestoreTest 4 0 0 0 4.926
DropTest 2 0 0 0 4.057
InsertTest 8 0 0 0 6.446
InsertUpdateIfConditionTest 42 0 0 0 21.145
SelectGroupByTest 7 0 0 0 18.744
SelectLimitTest 7 0 0 0 15.871
SelectMultiColumnRelationTest 22 0 0 0 10.214
SelectOrderByTest 17 0 0 0 8.873
SelectOrderedPartitionerTest 20 0 0 0 9.797
SelectSingleColumnRelationTest 23 0 0 0 11.089
SelectTest 82 0 0 0 30.483
TTLTest 7 0 0 0 10.203
TruncateTest 1 0 0 0 3.774
TuplesWithNullsComparisonTest 3 0 0 0 5.023
UpdateTest 11 0 0 0 9.339
UseTest 1 0 0 0 3.514
-------------------------------------------------------------------------------
org.apache.cassandra.db
Name Tests Errors Failures Skipped Time(s)
CellTest-cdc 11 0 0 0 3.126
CleanupTest-cdc 8 0 0 0 19.264
CleanupTransientTest-cdc 1 0 0 0 3.819
ClusteringBoundTest-cdc 2 0 0 0 0.069
ColumnFamilyMetricTest-cdc 2 0 0 0 3.290
ColumnFamilyStoreTest-cdc 8 0 0 0 4.972
ColumnsTest-cdc 8 0 0 0 1.692
CounterCacheTest-cdc 5 0 0 0 3.444
CounterCellTest-cdc 5 0 0 0 3.093
CounterMutationTest-cdc 4 0 0 0 3.400
DeletePartitionTest-cdc 1 0 0 0 3.269
DigestTest-cdc 6 0 0 0 0.447
DirectoriesTest-cdc 13 0 0 0 0.989
DiskBoundaryManagerTest-cdc 4 0 0 0 5.330
ImportTest-cdc 14 0 0 0 10.970
KeyCacheTest-cdc 6 0 0 0 4.101
KeyspaceTest-cdc 11 0 0 0 9.243
LivenessInfoTest-cdc 2 0 0 0 0.352
MmapFileTest-cdc 1 0 0 0 0.286
MultiKeyspaceTest-cdc 1 0 0 0 3.611
MutationExceededMaxSizeExceptionTest-cdc 1 0 0 0 0.058
NameSortTest-cdc 3 0 0 0 3.634
NativeCellTest-cdc 1 0 0 0 0.874
PartitionRangeReadTest-cdc 7 0 0 0 3.815
PartitionTest-cdc 4 0 0 0 3.319
RangeTombstoneListTest-cdc 25 0 0 0 1.005
RangeTombstoneTest-cdc 14 0 0 0 4.746
ReadCommandTest-cdc 23 0 0 0 5.799
ReadCommandVerbHandlerTest-cdc 4 0 0 0 4.929
ReadMessageTest-cdc 3 0 0 0 3.358
ReadResponseTest-cdc 8 0 0 0 0.583
RecoveryManagerFlushedTest-cdc 6 0 0 0 3.828
RecoveryManagerMissingHeaderTest-cdc 6 0 0 0 3.254
RecoveryManagerTest-cdc 42 0 0 0 8.669
RecoveryManagerTruncateTest-cdc 6 0 0 0 3.367
RemoveCellTest-cdc 1 0 0 0 3.491
RepairedDataInfoTest-cdc 7 0 0 0 1.486
RepairedDataTombstonesTest-cdc 7 0 0 0 29.320
RowCacheCQLTest-cdc 3 0 0 0 4.822
RowCacheTest-cdc 11 0 0 0 4.906
RowIndexEntryTest-cdc 4 0 0 0 4.754
RowIterationTest-cdc 3 0 0 0 4.720
RowTest-cdc 4 0 0 0 3.102
SchemaCQLHelperTest-cdc 9 0 0 0 7.402
ScrubTest-cdc 17 0 0 0 7.483
SecondaryIndexTest-cdc 14 0 0 0 10.379
SerializationHeaderTest-cdc 1 0 0 0 1.360
SinglePartitionReadCommandCQLTest-cdc 1 0 0 0 3.521
SinglePartitionSliceCommandTest-cdc 7 0 0 0 3.975
SystemKeyspaceMigrator40Test-cdc 4 0 0 0 4.645
SystemKeyspaceTest-cdc 4 0 0 0 2.462
TimeSortTest-cdc 2 0 0 0 4.905
TransformerTest-cdc 1 0 0 0 0.910
VerifyTest-cdc 23 0 0 0 4.257
CellTest-compression 11 0 0 0 3.223
CleanupTest-compression 8 0 0 0 17.843
CleanupTransientTest-compression 1 0 0 0 3.809
ClusteringBoundTest-compression 2 0 0 0 0.085
ColumnFamilyMetricTest-compression 2 0 0 0 3.414
ColumnFamilyStoreTest-compression 8 0 0 0 4.555
ColumnsTest-compression 8 0 0 0 1.751
CounterCacheTest-compression 5 0 0 0 3.486
CounterCellTest-compression 5 0 0 0 3.273
CounterMutationTest-compression 4 0 0 0 3.525
DeletePartitionTest-compression 1 0 0 0 3.370
DigestTest-compression 6 0 0 0 0.507
DirectoriesTest-compression 13 0 0 0 1.141
DiskBoundaryManagerTest-compression 4 0 0 0 4.829
ImportTest-compression 14 0 0 0 8.826
KeyCacheTest-compression 6 0 0 0 4.147
KeyspaceTest-compression 11 0 0 0 7.820
LivenessInfoTest-compression 2 0 0 0 0.432
MmapFileTest-compression 1 0 0 0 0.330
MultiKeyspaceTest-compression 1 0 0 0 3.551
MutationExceededMaxSizeExceptionTest- 1 0 0 0 0.070
compression
NameSortTest-compression 3 0 0 0 3.742
NativeCellTest-compression 1 0 0 0 0.895
PartitionRangeReadTest-compression 7 0 0 0 3.753
PartitionTest-compression 4 0 0 0 3.383
RangeTombstoneListTest-compression 25 0 0 0 1.095
RangeTombstoneTest-compression 14 0 0 0 4.331
ReadCommandTest-compression 23 0 0 0 5.046
ReadCommandVerbHandlerTest-compression 4 0 0 0 6.171
ReadMessageTest-compression 3 0 0 0 3.391
ReadResponseTest-compression 8 0 0 0 0.651
RecoveryManagerFlushedTest-compression 6 0 0 0 3.440
RecoveryManagerMissingHeaderTest- 6 0 0 0 3.021
compression
RecoveryManagerTest-compression 42 0 0 0 6.568
RecoveryManagerTruncateTest-compression 6 0 0 0 3.271
RemoveCellTest-compression 1 0 0 0 3.499
RepairedDataInfoTest-compression 7 0 0 0 1.638
RepairedDataTombstonesTest-compression 7 0 0 0 27.796
RowCacheCQLTest-compression 3 0 0 0 4.347
RowCacheTest-compression 11 0 0 0 4.935
RowIndexEntryTest-compression 4 0 0 0 4.386
RowIterationTest-compression 3 0 0 0 4.204
RowTest-compression 4 0 0 0 3.188
SchemaCQLHelperTest-compression 9 0 0 0 6.029
ScrubTest-compression 17 0 0 2 7.313
SecondaryIndexTest-compression 14 0 0 0 9.468
SerializationHeaderTest-compression 1 0 0 0 1.559
SinglePartitionReadCommandCQLTest- 1 0 0 0 3.480
compression
SinglePartitionSliceCommandTest- 7 0 0 0 3.783
compression
SystemKeyspaceMigrator40Test-compression 4 0 0 0 4.120
SystemKeyspaceTest-compression 4 0 0 0 2.614
TimeSortTest-compression 2 0 0 0 4.679
TransformerTest-compression 1 0 0 0 1.063
VerifyTest-compression 23 0 0 0 4.233
CellTest 11 0 0 0 3.209
CleanupTest 8 0 0 0 17.949
CleanupTransientTest 1 0 0 0 3.690
ClusteringBoundTest 2 0 0 0 0.082
ColumnFamilyMetricTest 2 0 0 0 3.497
ColumnFamilyStoreTest 8 0 0 0 4.665
ColumnsTest 8 0 0 0 1.861
CounterCacheTest 5 0 0 0 3.727
CounterCellTest 5 0 0 0 3.154
CounterMutationTest 4 0 0 0 3.502
DeletePartitionTest 1 0 0 0 3.314
DigestTest 6 0 0 0 0.496
DirectoriesTest 13 0 0 0 1.118
DiskBoundaryManagerTest 4 0 0 0 4.901
ImportTest 14 0 0 0 8.759
KeyCacheTest 6 0 0 0 3.941
KeyspaceTest 11 0 0 0 7.721
LivenessInfoTest 2 0 0 0 0.373
MmapFileTest 1 0 0 0 0.314
MultiKeyspaceTest 1 0 0 0 3.513
MutationExceededMaxSizeExceptionTest 1 0 0 0 0.068
NameSortTest 3 0 0 0 3.552
NativeCellTest 1 0 0 0 0.945
PartitionRangeReadTest 7 0 0 0 3.664
PartitionTest 4 0 0 0 3.218
RangeTombstoneListTest 25 0 0 0 1.060
RangeTombstoneTest 14 0 0 0 4.177
ReadCommandTest 23 0 0 0 4.951
ReadCommandVerbHandlerTest 4 0 0 0 4.710
ReadMessageTest 3 0 0 0 3.452
ReadResponseTest 8 0 0 0 0.664
RecoveryManagerFlushedTest 6 0 0 0 3.475
RecoveryManagerMissingHeaderTest 6 0 0 0 3.125
RecoveryManagerTest 42 0 0 0 6.632
RecoveryManagerTruncateTest 6 0 0 0 3.230
RemoveCellTest 1 0 0 0 3.504
RepairedDataInfoTest 7 0 0 0 1.624
RepairedDataTombstonesTest 7 0 0 0 27.773
RowCacheCQLTest 3 0 0 0 4.392
RowCacheTest 11 0 0 0 4.822
RowIndexEntryTest 4 0 0 0 4.251
RowIterationTest 3 0 0 0 4.259
RowTest 4 0 0 0 3.167
SchemaCQLHelperTest 9 0 0 0 6.199
ScrubTest 17 0 0 0 7.246
SecondaryIndexTest 14 0 0 0 9.484
SerializationHeaderTest 1 0 0 0 1.481
SinglePartitionReadCommandCQLTest 1 0 0 0 3.398
SinglePartitionSliceCommandTest 7 0 0 0 3.695
SystemKeyspaceMigrator40Test 4 0 0 0 3.946
SystemKeyspaceTest 4 0 0 0 2.499
TimeSortTest 2 0 0 0 4.590
TransformerTest 1 0 0 0 1.026
VerifyTest 23 0 0 0 4.044
-------------------------------------------------------------------------------
org.apache.cassandra.db.aggregation
Name Tests Errors Failures Skipped Time(s)
GroupMakerTest-cdc 6 0 0 0 0.769
GroupMakerTest-compression 6 0 0 0 0.919
GroupMakerTest 6 0 0 0 0.877
-------------------------------------------------------------------------------
org.apache.cassandra.db.columniterator
Name Tests Errors Failures Skipped Time(s)
SSTableReverseIteratorTest-cdc 1 0 0 0 3.729
SSTableReverseIteratorTest-compression 1 0 0 0 3.418
SSTableReverseIteratorTest 1 0 0 0 3.324
-------------------------------------------------------------------------------
org.apache.cassandra.db.commitlog
Name Tests Errors Failures Skipped Time(s)
BatchCommitLogStressTest 15 0 0 0 196.743
CommitLogStressTest 1 0 0 1 0.060
GroupCommitLogStressTest 15 0 0 0 187.046
PeriodicCommitLogStressTest 15 0 0 0 242.579
AbstractCommitLogServiceTest-cdc 9 0 0 0 1.326
BatchCommitLogTest-cdc 174 0 0 0 9.989
CommitLogCQLTest-cdc 1 0 0 0 3.856
CommitLogChainedMarkersTest-cdc 1 0 0 0 4.268
CommitLogDescriptorTest-cdc 14 0 0 0 11.953
CommitLogFailurePolicyTest-cdc 4 0 0 0 5.761
CommitLogInitWithExceptionTest-cdc 1 0 0 0 1.528
CommitLogReaderTest-cdc 5 0 0 0 6.766
CommitLogSegmentBackpressureTest-cdc 1 0 0 0 4.672
CommitLogSegmentManagerCDCTest-cdc 7 0 0 0 10.455
CommitLogTest-cdc 1 0 0 1 0.056
CommitLogUpgradeTest-cdc 1 0 0 0 3.406
CommitlogShutdownTest-cdc 1 0 0 0 3.790
GroupCommitLogTest-cdc 162 0 0 0 15.599
SegmentReaderTest-cdc 6 0 0 0 1.127
SnapshotDeletingTest-cdc 1 0 0 1 3.152
AbstractCommitLogServiceTest-compression 9 0 0 0 1.184
BatchCommitLogTest-compression 174 0 0 0 7.281
CommitLogCQLTest-compression 1 0 0 0 3.604
CommitLogChainedMarkersTest-compression 1 0 0 0 4.102
CommitLogDescriptorTest-compression 14 0 0 0 13.501
CommitLogFailurePolicyTest-compression 4 0 0 0 5.851
CommitLogInitWithExceptionTest- 1 0 0 0 1.556
compression
CommitLogReaderTest-compression 5 0 0 0 6.203
CommitLogSegmentBackpressureTest- 1 0 0 0 4.728
compression
CommitLogSegmentManagerCDCTest- 7 0 0 0 8.642
compression
CommitLogTest-compression 1 0 0 1 0.062
CommitLogUpgradeTest-compression 1 0 0 0 3.572
CommitlogShutdownTest-compression 1 0 0 0 3.852
GroupCommitLogTest-compression 162 0 0 0 13.429
SegmentReaderTest-compression 6 0 0 0 1.286
SnapshotDeletingTest-compression 1 0 0 1 3.270
AbstractCommitLogServiceTest 9 0 0 0 1.198
BatchCommitLogTest 174 0 0 0 7.128
CommitLogCQLTest 1 0 0 0 3.485
CommitLogChainedMarkersTest 1 0 0 0 4.028
CommitLogDescriptorTest 14 0 0 0 13.433
CommitLogFailurePolicyTest 4 0 0 0 5.755
CommitLogInitWithExceptionTest 1 0 0 0 1.572
CommitLogReaderTest 5 0 0 0 6.199
CommitLogSegmentBackpressureTest 1 0 0 0 4.659
CommitLogSegmentManagerCDCTest 7 0 0 0 8.671
CommitLogTest 1 0 0 1 0.065
CommitLogUpgradeTest 1 0 0 0 3.546
CommitlogShutdownTest 1 0 0 0 3.748
GroupCommitLogTest 162 0 0 0 13.358
SegmentReaderTest 6 0 0 0 1.222
SnapshotDeletingTest 1 0 0 1 3.112
-------------------------------------------------------------------------------
org.apache.cassandra.db.compaction
Name Tests Errors Failures Skipped Time(s)
LongCompactionsTest 4 0 0 0 25.978
LongLeveledCompactionStrategyCQLTest 1 0 0 0 304.976
LongLeveledCompactionStrategyTest 3 0 0 0 20.127
AbstractCompactionStrategyTest-cdc 4 0 0 0 4.090
AbstractPendingRepairTest-cdc 1 0 0 1 0.054
ActiveCompactionsTest-cdc 6 0 0 0 7.032
AntiCompactionBytemanTest-cdc 1 0 0 0 6.458
AntiCompactionTest-cdc 15 0 0 0 25.273
CancelCompactionsTest-cdc 8 0 0 0 10.971
CompactionAwareWriterTest-cdc 4 0 0 0 67.354
CompactionControllerTest-cdc 2 0 0 0 3.638
CompactionExecutorTest-cdc 3 0 0 0 0.843
CompactionInfoTest-cdc 2 0 0 0 3.509
CompactionIteratorTest-cdc 12 0 0 0 8.449
CompactionStrategyManagerPendingRepairTest- 9 0 0 0 4.399
cdc
CompactionStrategyManagerTest-cdc 5 0 0 0 6.963
CompactionTaskTest-cdc 2 0 0 0 3.508
CompactionsBytemanTest-cdc 6 0 0 0 14.790
CompactionsCQLTest-cdc 24 0 0 0 42.168
CompactionsPurgeTest-cdc 10 0 0 0 4.305
CompactionsTest-cdc 6 0 0 1 16.905
CorruptedSSTablesCompactionsTest-cdc 2 0 0 0 6.022
DateTieredCompactionStrategyTest-cdc 7 0 0 0 7.887
LeveledCompactionStrategyTest-cdc 11 0 0 0 25.077
LeveledGenerationsTest-cdc 4 0 0 0 4.351
NeverPurgeTest-cdc 4 0 0 0 9.855
OneCompactionTest-cdc 2 0 0 0 3.335
PendingRepairManagerTest-cdc 16 0 0 0 5.042
SingleSSTableLCSTaskTest-cdc 4 0 0 0 76.076
SizeTieredCompactionStrategyTest-cdc 3 0 0 0 3.296
TTLExpiryTest-cdc 5 0 0 0 10.505
TimeWindowCompactionStrategyTest-cdc 5 0 0 0 9.343
ValidationExecutorTest-cdc 2 0 0 0 0.560
AbstractCompactionStrategyTest-compression 4 0 0 0 3.837
AbstractPendingRepairTest-compression 1 0 0 1 0.070
ActiveCompactionsTest-compression 6 0 0 0 5.939
AntiCompactionBytemanTest-compression 1 0 0 0 6.359
AntiCompactionTest-compression 15 0 0 0 30.898
CancelCompactionsTest-compression 8 0 0 0 9.683
CompactionAwareWriterTest-compression 4 0 0 0 67.623
CompactionControllerTest-compression 2 0 0 0 4.313
CompactionExecutorTest-compression 3 0 0 0 1.089
CompactionInfoTest-compression 2 0 0 0 3.803
CompactionIteratorTest-compression 12 0 0 0 7.572
CompactionStrategyManagerPendingRepairTest- 9 0 0 0 4.546
compression
CompactionStrategyManagerTest-compression 5 0 0 0 7.872
CompactionTaskTest-compression 2 0 0 0 3.461
CompactionsBytemanTest-compression 6 0 0 0 14.746
CompactionsCQLTest-compression 24 0 0 0 36.217
CompactionsPurgeTest-compression 10 0 0 0 4.067
CompactionsTest-compression 6 0 0 1 16.864
CorruptedSSTablesCompactionsTest- 2 0 0 0 5.107
compression
DateTieredCompactionStrategyTest- 7 0 0 0 7.148
compression
LeveledCompactionStrategyTest-compression 11 0 0 0 27.127
LeveledGenerationsTest-compression 4 0 0 0 4.006
NeverPurgeTest-compression 4 0 0 0 9.300
OneCompactionTest-compression 2 0 0 0 3.495
PendingRepairManagerTest-compression 16 0 0 0 4.624
SingleSSTableLCSTaskTest-compression 4 0 0 0 90.682
SizeTieredCompactionStrategyTest- 3 0 0 0 3.251
compression
TTLExpiryTest-compression 5 0 0 0 9.998
TimeWindowCompactionStrategyTest- 5 0 0 0 8.726
compression
ValidationExecutorTest-compression 2 0 0 0 0.623
AbstractCompactionStrategyTest 4 0 0 0 3.803
AbstractPendingRepairTest 1 0 0 1 0.059
ActiveCompactionsTest 6 0 0 0 6.820
AntiCompactionBytemanTest 1 0 0 0 6.751
AntiCompactionTest 15 0 0 0 42.380
CancelCompactionsTest 8 0 0 0 10.153
CompactionAwareWriterTest 4 0 0 0 76.287
CompactionControllerTest 2 0 0 0 3.726
CompactionExecutorTest 3 0 0 0 0.892
CompactionInfoTest 2 0 0 0 3.510
CompactionIteratorTest 12 0 0 0 7.237
CompactionStrategyManagerPendingRepairTest 9 0 0 0 3.974
CompactionStrategyManagerTest 5 0 0 0 5.974
CompactionTaskTest 2 0 0 0 3.562
CompactionsBytemanTest 6 0 0 0 13.304
CompactionsCQLTest 24 0 0 0 37.064
CompactionsPurgeTest 10 0 0 0 5.056
CompactionsTest 6 0 0 1 16.854
CorruptedSSTablesCompactionsTest 2 0 0 0 5.081
DateTieredCompactionStrategyTest 7 0 0 0 7.063
LeveledCompactionStrategyTest 11 0 0 0 24.866
LeveledGenerationsTest 4 0 0 0 3.889
NeverPurgeTest 4 0 0 0 9.246
OneCompactionTest 2 0 0 0 3.458
PendingRepairManagerTest 16 0 0 0 4.587
SingleSSTableLCSTaskTest 4 0 0 0 91.400
SizeTieredCompactionStrategyTest 3 0 0 0 3.320
TTLExpiryTest 5 0 0 0 10.010
TimeWindowCompactionStrategyTest 5 0 0 0 8.822
ValidationExecutorTest 2 0 0 0 0.593
-------------------------------------------------------------------------------
org.apache.cassandra.db.composites
Name Tests Errors Failures Skipped Time(s)
CTypeTest-cdc 3 0 0 0 0.463
CTypeTest-compression 3 0 0 0 0.542
CTypeTest 3 0 0 0 0.510
-------------------------------------------------------------------------------
org.apache.cassandra.db.context
Name Tests Errors Failures Skipped Time(s)
CounterContextTest-cdc 8 0 0 0 1.989
CounterContextTest-compression 8 0 0 0 2.086
CounterContextTest 8 0 0 0 2.095
-------------------------------------------------------------------------------
org.apache.cassandra.db.filter
Name Tests Errors Failures Skipped Time(s)
ColumnFilterTest-cdc 2 0 0 0 0.569
RowFilterTest-cdc 1 0 0 0 0.556
SliceTest-cdc 4 0 0 0 0.107
ColumnFilterTest-compression 2 0 0 0 0.638
RowFilterTest-compression 1 0 0 0 0.657
SliceTest-compression 4 0 0 0 0.127
ColumnFilterTest 2 0 0 0 0.678
RowFilterTest 1 0 0 0 0.648
SliceTest 4 0 0 0 0.123
-------------------------------------------------------------------------------
org.apache.cassandra.db.lifecycle
Name Tests Errors Failures Skipped Time(s)
HelpersTest-cdc 8 0 0 0 13.199
LifecycleTransactionTest-cdc 8 0 0 0 2.538
LogTransactionTest-cdc 39 0 0 0 3.164
RealTransactionsTest-cdc 3 0 0 0 4.187
TrackerTest-cdc 7 0 0 0 2.322
ViewTest-cdc 3 0 0 0 2.024
HelpersTest-compression 8 0 0 0 14.764
LifecycleTransactionTest-compression 8 0 0 0 2.637
LogTransactionTest-compression 39 0 0 0 3.039
RealTransactionsTest-compression 3 0 0 0 4.186
TrackerTest-compression 7 0 0 0 2.346
ViewTest-compression 3 0 0 0 2.096
HelpersTest 8 0 0 0 14.947
LifecycleTransactionTest 8 0 0 0 2.668
LogTransactionTest 39 0 0 0 2.958
RealTransactionsTest 3 0 0 0 4.071
TrackerTest 7 0 0 0 2.320
ViewTest 3 0 0 0 2.090
-------------------------------------------------------------------------------
org.apache.cassandra.db.marshal
Name Tests Errors Failures Skipped Time(s)
AbstractCompositeTypeTest-cdc 2 0 0 0 0.063
ByteBufferAccessorTest-cdc 2 0 0 0 0.094
BytesTypeTest-cdc 2 0 0 0 0.229
CollectionTypeTest-cdc 6 0 0 0 0.142
CollectionTypesTest-cdc 3 0 0 0 5.456
CompositeAndTupleTypesTest-cdc 3 0 0 0 8.226
CompositeTypeTest-cdc 9 0 0 0 3.207
DecimalTypeTest-cdc 3 0 0 0 0.071
DynamicCompositeTypeTest-cdc 8 0 0 0 3.063
EmptyTypeTest-cdc 7 0 0 0 0.776
IntegerTypeTest-cdc 10 0 0 0 0.108
JsonConversionTest-cdc 30 0 0 0 0.672
ReversedTypeTest-cdc 1 0 0 0 0.087
RoundTripTest-cdc 8 0 0 0 0.468
SimpleDateTypeTest-cdc 1 0 0 0 0.108
TimeTypeTest-cdc 2 0 0 0 3.813
TimeUUIDTypeTest-cdc 6 0 0 0 7.684
TimestampTypeTest-cdc 1 0 0 0 0.539
TypeCompareTest-cdc 6 0 0 0 0.262
TypeParserTest-cdc 3 0 0 0 0.788
TypeValidationTest-cdc 18 0 0 0 3.671
UUIDTypeTest-cdc 6 0 0 0 3.738
ValueAccessorTest-cdc 4 0 0 0 0.504
AbstractCompositeTypeTest-compression 2 0 0 0 0.071
ByteBufferAccessorTest-compression 2 0 0 0 0.116
BytesTypeTest-compression 2 0 0 0 0.238
CollectionTypeTest-compression 6 0 0 0 0.164
CollectionTypesTest-compression 3 0 0 0 5.765
CompositeAndTupleTypesTest-compression 3 0 0 0 8.326
CompositeTypeTest-compression 9 0 0 0 3.297
DecimalTypeTest-compression 3 0 0 0 0.080
DynamicCompositeTypeTest-compression 8 0 0 0 3.252
EmptyTypeTest-compression 7 0 0 0 0.906
IntegerTypeTest-compression 10 0 0 0 0.119
JsonConversionTest-compression 30 0 0 0 0.727
ReversedTypeTest-compression 1 0 0 0 0.102
RoundTripTest-compression 8 0 0 0 0.525
SimpleDateTypeTest-compression 1 0 0 0 0.130
TimeTypeTest-compression 2 0 0 0 3.554
TimeUUIDTypeTest-compression 6 0 0 0 7.697
TimestampTypeTest-compression 1 0 0 0 0.586
TypeCompareTest-compression 6 0 0 0 0.309
TypeParserTest-compression 3 0 0 0 0.915
TypeValidationTest-compression 18 0 0 0 3.616
UUIDTypeTest-compression 6 0 0 0 3.798
ValueAccessorTest-compression 4 0 0 0 0.541
AbstractCompositeTypeTest 2 0 0 0 0.070
ByteBufferAccessorTest 2 0 0 0 0.109
BytesTypeTest 2 0 0 0 0.246
CollectionTypeTest 6 0 0 0 0.172
CollectionTypesTest 3 0 0 0 5.757
CompositeAndTupleTypesTest 3 0 0 0 8.316
CompositeTypeTest 9 0 0 0 3.132
DecimalTypeTest 3 0 0 0 0.084
DynamicCompositeTypeTest 8 0 0 0 3.196
EmptyTypeTest 7 0 0 0 0.869
IntegerTypeTest 10 0 0 0 0.114
JsonConversionTest 30 0 0 0 0.685
ReversedTypeTest 1 0 0 0 0.099
RoundTripTest 8 0 0 0 0.520
SimpleDateTypeTest 1 0 0 0 0.123
TimeTypeTest 2 0 0 0 3.726
TimeUUIDTypeTest 6 0 0 0 7.509
TimestampTypeTest 1 0 0 0 0.611
TypeCompareTest 6 0 0 0 0.293
TypeParserTest 3 0 0 0 0.886
TypeValidationTest 18 0 0 0 3.342
UUIDTypeTest 6 0 0 0 3.976
ValueAccessorTest 4 0 0 0 0.508
-------------------------------------------------------------------------------
org.apache.cassandra.db.monitoring
Name Tests Errors Failures Skipped Time(s)
MonitoringTaskTest-cdc 15 0 0 0 5.453
MonitoringTaskTest-compression 15 0 0 0 5.420
MonitoringTaskTest 15 0 0 0 5.381
-------------------------------------------------------------------------------
org.apache.cassandra.db.partition
Name Tests Errors Failures Skipped Time(s)
PartitionImplementationTest-cdc 7 0 0 0 61.893
PartitionUpdateTest-cdc 3 0 0 0 4.716
PartitionImplementationTest-compression 7 0 0 0 56.411
PartitionUpdateTest-compression 3 0 0 0 4.138
PartitionImplementationTest 7 0 0 0 60.137
PartitionUpdateTest 3 0 0 0 4.171
-------------------------------------------------------------------------------
org.apache.cassandra.db.partitions
Name Tests Errors Failures Skipped Time(s)
PurgeFunctionTest-cdc 8 0 0 0 0.594
PurgeFunctionTest-compression 8 0 0 0 0.669
PurgeFunctionTest 8 0 0 0 0.637
-------------------------------------------------------------------------------
org.apache.cassandra.db.repair
Name Tests Errors Failures Skipped Time
(s)
AbstractPendingAntiCompactionTest-cdc 1 0 0 1 0.054
CompactionManagerGetSSTablesForValidationTest- 3 0 0 0 3.490
cdc
PendingAntiCompactionBytemanTest-cdc 1 0 0 0 4.142
PendingAntiCompactionTest-cdc 18 0 0 0 13.792
AbstractPendingAntiCompactionTest-compression 1 0 0 1 0.061
CompactionManagerGetSSTablesForValidationTest- 3 0 0 0 3.525
compression
PendingAntiCompactionBytemanTest-compression 1 0 0 0 3.973
PendingAntiCompactionTest-compression 18 0 0 0 12.692
AbstractPendingAntiCompactionTest 1 0 0 1 0.070
CompactionManagerGetSSTablesForValidationTest 3 0 0 0 3.391
PendingAntiCompactionBytemanTest 1 0 0 0 3.945
PendingAntiCompactionTest 18 0 0 0 12.509
-------------------------------------------------------------------------------
org.apache.cassandra.db.rows
Name Tests Errors Failures Skipped Time(s)
ColumnMetadataVersionComparatorTest-cdc 10 0 0 0 0.305
EncodingStatsTest-cdc 10 0 0 0 0.149
RowAndDeletionMergeIteratorTest-cdc 10 0 0 0 3.072
RowsTest-cdc 9 0 0 0 0.933
ThrottledUnfilteredIteratorTest-cdc 7 0 0 0 9.345
UnfilteredRowIteratorsMergeTest-cdc 5 0 0 0 27.557
UnfilteredRowIteratorsTest-cdc 1 0 0 0 0.574
ColumnMetadataVersionComparatorTest- 10 0 0 0 0.340
compression
EncodingStatsTest-compression 10 0 0 0 0.154
RowAndDeletionMergeIteratorTest- 10 0 0 0 3.276
compression
RowsTest-compression 9 0 0 0 1.049
ThrottledUnfilteredIteratorTest- 7 0 0 0 10.449
compression
UnfilteredRowIteratorsMergeTest- 5 0 0 0 27.489
compression
UnfilteredRowIteratorsTest-compression 1 0 0 0 0.659
ColumnMetadataVersionComparatorTest 10 0 0 0 0.325
EncodingStatsTest 10 0 0 0 0.148
RowAndDeletionMergeIteratorTest 10 0 0 0 3.204
RowsTest 9 0 0 0 1.081
ThrottledUnfilteredIteratorTest 7 0 0 0 10.130
UnfilteredRowIteratorsMergeTest 5 0 0 0 27.526
UnfilteredRowIteratorsTest 1 0 0 0 0.657
-------------------------------------------------------------------------------
org.apache.cassandra.db.streaming
Name Tests Errors Failures Skipped Time
(s)
CassandraEntireSSTableStreamWriterTest-cdc 2 0 0 0 3.653
CassandraOutgoingFileTest-cdc 3 0 0 0 3.348
CassandraStreamHeaderTest-cdc 5 0 0 0 3.241
CassandraStreamManagerTest-cdc 2 0 0 0 3.618
ComponentManifestTest-cdc 2 0 0 0 0.246
EntireSSTableStreamConcurrentComponentMutationTest- 3 0 0 0 14.442
cdc
StreamRequestTest-cdc 1 0 0 0 0.829
CassandraEntireSSTableStreamWriterTest-compression 2 0 0 0 3.605
CassandraOutgoingFileTest-compression 3 0 0 0 3.490
CassandraStreamHeaderTest-compression 5 0 0 0 3.338
CassandraStreamManagerTest-compression 2 0 0 0 3.550
ComponentManifestTest-compression 2 0 0 0 0.274
EntireSSTableStreamConcurrentComponentMutationTest- 3 0 0 0 14.410
compression
StreamRequestTest-compression 1 0 0 0 0.894
CassandraEntireSSTableStreamWriterTest 2 0 0 0 3.594
CassandraOutgoingFileTest 3 0 0 0 3.592
CassandraStreamHeaderTest 5 0 0 0 3.389
CassandraStreamManagerTest 2 0 0 0 3.672
ComponentManifestTest 2 0 0 0 0.291
EntireSSTableStreamConcurrentComponentMutationTest 3 0 0 0 14.282
StreamRequestTest 1 0 0 0 0.863
-------------------------------------------------------------------------------
org.apache.cassandra.db.transform
Name Tests Errors Failures Skipped Time(s)
DuplicateRowCheckerTest-cdc 7 0 0 0 6.940
RTTransformationsTest-cdc 15 0 0 0 0.559
DuplicateRowCheckerTest-compression 7 0 0 0 5.860
RTTransformationsTest-compression 15 0 0 0 0.637
DuplicateRowCheckerTest 7 0 0 0 5.788
RTTransformationsTest 15 0 0 0 0.633
-------------------------------------------------------------------------------
org.apache.cassandra.db.view
Name Tests Errors Failures Skipped Time(s)
ViewBuilderTaskTest-cdc 1 0 0 0 19.391
ViewUtilsTest-cdc 3 0 0 0 1.300
ViewBuilderTaskTest-compression 1 0 0 0 19.971
ViewUtilsTest-compression 3 0 0 0 1.434
ViewBuilderTaskTest 1 0 0 0 20.273
ViewUtilsTest 3 0 0 0 1.601
-------------------------------------------------------------------------------
org.apache.cassandra.db.virtual
Name Tests Errors Failures Skipped Time(s)
SettingsTableTest-cdc 7 0 0 0 14.606
SystemPropertiesTableTest-cdc 6 0 0 0 13.831
SettingsTableTest-compression 7 0 0 0 13.694
SystemPropertiesTableTest-compression 6 0 0 0 13.176
SettingsTableTest 7 0 0 0 14.054
SystemPropertiesTableTest 6 0 0 0 13.237
-------------------------------------------------------------------------------
org.apache.cassandra.dht
Name Tests Errors Failures Skipped Time(s)
BootStrapperTest-cdc 10 0 0 0 6.373
BoundsTest-cdc 1 0 0 0 0.094
ByteOrderedPartitionerTest-cdc 6 0 0 0 2.073
KeyCollisionTest-cdc 1 0 0 0 3.113
Murmur3PartitionerTest-cdc 10 0 0 0 1.663
OrderPreservingPartitionerTest-cdc 7 0 0 0 2.100
RandomPartitionerTest-cdc 9 0 0 0 2.007
RangeFetchMapCalculatorTest-cdc 13 0 0 0 0.950
RangeTest-cdc 32 0 0 0 14.035
SplitterTest-cdc 14 0 0 0 20.095
StreamStateStoreTest-cdc 1 0 0 0 1.930
BootStrapperTest-compression 10 0 0 0 7.422
BoundsTest-compression 1 0 0 0 0.106
ByteOrderedPartitionerTest-compression 6 0 0 0 2.103
KeyCollisionTest-compression 1 0 0 0 3.228
Murmur3PartitionerTest-compression 10 0 0 0 1.772
OrderPreservingPartitionerTest- 7 0 0 0 2.374
compression
RandomPartitionerTest-compression 9 0 0 0 2.102
RangeFetchMapCalculatorTest-compression 13 0 0 0 0.989
RangeTest-compression 32 0 0 0 15.486
SplitterTest-compression 14 0 0 0 21.291
StreamStateStoreTest-compression 1 0 0 0 2.083
BootStrapperTest 10 0 0 0 5.682
BoundsTest 1 0 0 0 0.108
ByteOrderedPartitionerTest 6 0 0 0 2.132
KeyCollisionTest 1 0 0 0 3.116
Murmur3PartitionerTest 10 0 0 0 1.764
OrderPreservingPartitionerTest 7 0 0 0 2.317
RandomPartitionerTest 9 0 0 0 2.086
RangeFetchMapCalculatorTest 13 0 0 0 0.955
RangeTest 32 0 0 0 13.183
SplitterTest 14 0 0 0 19.761
StreamStateStoreTest 1 0 0 0 2.096
-------------------------------------------------------------------------------
org.apache.cassandra.dht.tokenallocator
Name Tests Errors Failures Skipped Time(s)
AbstractReplicationAwareTokenAllocatorTest 1 0 0 1 0.064
Murmur3ReplicationAwareTokenAllocatorTest 2 0 0 0 160.463
NoReplicationTokenAllocatorTest 4 0 0 0 6.506
RandomReplicationAwareTokenAllocatorTest 2 0 0 0 65.771
-------------------------------------------------------------------------------
org.apache.cassandra.diag
Name Tests Errors Failures Skipped Time(s)
DiagnosticEventServiceTest-cdc 6 0 0 0 0.856
DiagnosticEventServiceTest-compression 6 0 0 0 0.920
DiagnosticEventServiceTest 6 0 0 0 0.920
-------------------------------------------------------------------------------
org.apache.cassandra.diag.store
Name Tests Errors Failures Skipped Time(s)
DiagnosticEventMemoryStoreTest-cdc 6 0 0 0 0.079
DiagnosticEventMemoryStoreTest- 6 0 0 0 0.074
compression
DiagnosticEventMemoryStoreTest 6 0 0 0 0.079
-------------------------------------------------------------------------------
org.apache.cassandra.distributed.test
Name Tests Errors Failures Skipped Time(s)
BootstrapTest 1 0 0 0 80.464
CasWriteTest 9 0 0 0 28.738
FailingRepairTest 6 0 0 0 34.481
FqlReplayDDLExclusionTest 1 0 0 0 28.949
FrozenUDTTest 4 0 0 0 27.406
FullRepairCoordinatorFastTest 66 0 0 2 73.127
FullRepairCoordinatorNeighbourDownTest 12 0 0 0 226.121
FullRepairCoordinatorTimeoutTest 6 0 0 0 94.083
GossipSettlesTest 1 0 0 0 34.095
IncRepairTruncationTest 1 0 0 0 28.823
IncrementalRepairCoordinatorFastTest 66 0 0 6 70.755
IncrementalRepairCoordinatorNeighbourDownTest 12 0 0 0 232.175
IncrementalRepairCoordinatorTimeoutTest 6 0 0 0 92.916
JVMDTestTest 1 0 0 0 6.243
JVMStabilityInspectorCorruptSSTableExceptionTest 2 0 0 0 81.379
LargeColumnTest 1 0 0 0 11.920
MessageFiltersTest 5 0 0 0 56.971
MessageForwardingTest 1 0 0 0 12.745
NativeProtocolTest 2 0 0 0 68.221
NetstatsBootstrapWithEntireSSTablesCompressionStreamingTest 2 0 0 0 199.118
NetstatsBootstrapWithoutEntireSSTablesCompressionStreamingTest 2 0 0 0 205.914
NetstatsRepairStreamingTest 2 0 0 0 249.779
NetworkTopologyTest 6 0 0 0 23.173
NodeToolTest 1 0 0 0 6.432
PreviewRepairCoordinatorFastTest 66 0 0 2 71.787
PreviewRepairCoordinatorNeighbourDownTest 12 0 0 0 225.487
PreviewRepairCoordinatorTimeoutTest 6 0 0 0 92.675
PreviewRepairTest 4 0 0 0 121.095
QueryReplayerEndToEndTest 1 0 0 0 50.402
ReadRepairTest 6 0 0 0 96.766
RepairBoundaryTest 2 0 0 0 47.298
RepairCoordinatorFailingMessageTest 1 0 0 1 0.083
RepairDigestTrackingTest 5 0 0 0 43.655
RepairOperationalTest 5 0 0 0 64.563
RepairTest 6 0 0 0 81.827
ReplicaFilteringProtectionTest 3 0 0 0 9.186
ResourceLeakTest 1 0 0 1 0.059
ShortReadProtectionTest 2 0 0 0 15.897
SimpleReadWriteTest 15 0 0 0 132.390
StreamPrepareFailTest 1 0 0 0 29.008
StreamingTest 1 0 0 0 13.038
TableEstimatesTest 2 0 0 0 6.646
TopologyChangeTest 4 0 0 0 193.038
-------------------------------------------------------------------------------
org.apache.cassandra.distributed.upgrade
Name Tests Errors Failures Skipped Time(s)
MixedModeReadRepairTest 1 0 0 0 13.562
MixedModeReadTest 1 0 0 0 23.392
PagingTest 1 0 0 0 131.115
UpgradeTest 1 0 0 0 84.805
-------------------------------------------------------------------------------
org.apache.cassandra.fql
Name Tests Errors Failures Skipped Time(s)
FullQueryLoggerTest-cdc 35 0 0 0 12.200
FullQueryLoggerTest-compression 35 0 0 0 8.878
FullQueryLoggerTest 35 0 0 0 8.828
-------------------------------------------------------------------------------
org.apache.cassandra.fqltool
Name Tests Errors Failures Skipped Time(s)
FQLCompareTest 3 0 0 0 2.762
FQLReplayTest 22 0 0 0 2.366
-------------------------------------------------------------------------------
org.apache.cassandra.gms
Name Tests Errors Failures Skipped Time(s)
ArrayBackedBoundedStatsTest-cdc 2 0 0 0 0.058
ArrivalWindowTest-cdc 1 0 0 0 0.420
EndpointStateTest-cdc 2 0 0 0 1.417
ExpireEndpointTest-cdc 1 0 0 0 0.902
FailureDetectorTest-cdc 1 0 0 0 2.323
GossipDigestTest-cdc 1 0 0 0 0.243
GossiperTest-cdc 4 0 1 0 2.226
PendingRangeCalculatorServiceTest-cdc 1 0 0 0 4.403
SerializationsTest-cdc 2 0 0 0 0.767
ShadowRoundTest-cdc 1 0 0 0 5.569
ArrayBackedBoundedStatsTest-compression 2 0 0 0 0.068
ArrivalWindowTest-compression 1 0 0 0 0.492
EndpointStateTest-compression 2 0 0 0 1.268
ExpireEndpointTest-compression 1 0 0 0 0.950
FailureDetectorTest-compression 1 0 0 0 2.507
GossipDigestTest-compression 1 0 0 0 0.282
GossiperTest-compression 4 0 1 0 2.540
PendingRangeCalculatorServiceTest- 1 0 0 0 4.568
compression
SerializationsTest-compression 2 0 0 0 0.916
ShadowRoundTest-compression 1 0 0 0 5.948
ArrayBackedBoundedStatsTest 2 0 0 0 0.074
ArrivalWindowTest 1 0 0 0 0.463
EndpointStateTest 2 0 0 0 1.243
ExpireEndpointTest 1 0 0 0 0.932
FailureDetectorTest 1 0 0 0 2.498
GossipDigestTest 1 0 0 0 0.278
GossiperTest 4 0 1 0 2.459
PendingRangeCalculatorServiceTest 1 0 0 0 4.508
SerializationsTest 2 0 0 0 0.850
ShadowRoundTest 1 0 0 0 5.753
-------------------------------------------------------------------------------
org.apache.cassandra.hints
Name Tests Errors Failures Skipped Time(s)
HintsWriteThenReadTest 1 0 1 0 59.014
ChecksummedDataInputTest-cdc 3 0 0 0 0.859
HintMessageTest-cdc 1 0 0 0 3.074
HintTest-cdc 7 0 0 0 5.048
HintWriteTTLTest-cdc 4 0 0 0 3.152
HintsBufferPoolTest-cdc 1 0 0 0 3.701
HintsBufferTest-cdc 2 0 0 0 5.162
HintsCatalogTest-cdc 3 0 0 0 3.144
HintsCompressionTest-cdc 4 0 0 0 6.509
HintsDescriptorTest-cdc 5 0 0 0 0.463
HintsEncryptionTest-cdc 1 0 0 0 4.460
HintsReaderTest-cdc 2 0 0 0 3.630
HintsServiceTest-cdc 4 0 0 0 176.040
ChecksummedDataInputTest-compression 3 0 0 0 0.961
HintMessageTest-compression 1 0 0 0 3.439
HintTest-compression 7 0 0 0 4.764
HintWriteTTLTest-compression 4 0 0 0 3.375
HintsBufferPoolTest-compression 1 0 0 0 3.905
HintsBufferTest-compression 2 0 0 0 6.017
HintsCatalogTest-compression 3 0 0 0 3.469
HintsCompressionTest-compression 4 0 0 0 7.738
HintsDescriptorTest-compression 5 0 0 0 0.568
HintsEncryptionTest-compression 1 0 0 0 4.638
HintsReaderTest-compression 2 0 0 0 3.669
HintsServiceTest-compression 4 0 0 0 175.955
ChecksummedDataInputTest 3 0 0 0 0.882
HintMessageTest 1 0 0 0 3.153
HintTest 7 0 0 0 4.492
HintWriteTTLTest 4 0 0 0 3.244
HintsBufferPoolTest 1 0 0 0 3.807
HintsBufferTest 2 0 0 0 5.504
HintsCatalogTest 3 0 0 0 3.217
HintsCompressionTest 4 0 0 0 6.939
HintsDescriptorTest 5 0 0 0 0.518
HintsEncryptionTest 1 0 0 0 4.591
HintsReaderTest 2 0 0 0 3.614
HintsServiceTest 4 0 0 0 175.923
-------------------------------------------------------------------------------
org.apache.cassandra.index
Name Tests Errors Failures Skipped Time(s)
CustomIndexTest-cdc 29 0 0 0 31.998
SecondaryIndexManagerTest-cdc 16 0 0 0 33.137
CustomIndexTest-compression 29 0 0 0 25.024
SecondaryIndexManagerTest-compression 16 0 0 0 27.654
CustomIndexTest 29 0 0 0 25.201
SecondaryIndexManagerTest 16 0 0 0 27.954
-------------------------------------------------------------------------------
org.apache.cassandra.index.internal
Name Tests Errors Failures Skipped Time(s)
CassandraIndexTest-cdc 27 0 0 0 31.350
CassandraIndexTest-compression 27 0 0 0 20.419
CassandraIndexTest 27 0 0 0 20.573
-------------------------------------------------------------------------------
org.apache.cassandra.index.sasi
Name Tests Errors Failures Skipped Time(s)
SASICQLTest-cdc 9 0 0 0 26.178
SASIIndexTest-cdc 32 0 0 0 21.712
SASICQLTest-compression 9 0 0 0 19.935
SASIIndexTest-compression 32 0 0 0 20.100
SASICQLTest 9 0 0 0 19.976
SASIIndexTest 32 0 0 0 19.519
-------------------------------------------------------------------------------
org.apache.cassandra.index.sasi.analyzer
Name Tests Errors Failures Skipped Time(s)
DelimiterAnalyzerTest-cdc 12 0 0 0 0.414
NonTokenizingAnalyzerTest-cdc 3 0 0 0 0.241
StandardAnalyzerTest-cdc 10 0 0 0 0.605
DelimiterAnalyzerTest-compression 12 0 0 0 0.433
NonTokenizingAnalyzerTest-compression 3 0 0 0 0.286
StandardAnalyzerTest-compression 10 0 0 0 0.643
DelimiterAnalyzerTest 12 0 0 0 0.428
NonTokenizingAnalyzerTest 3 0 0 0 0.263
StandardAnalyzerTest 10 0 0 0 0.623
-------------------------------------------------------------------------------
org.apache.cassandra.index.sasi.conf
Name Tests Errors Failures Skipped Time(s)
IndexModeTest-cdc 14 0 0 0 0.941
IndexModeTest-compression 14 0 0 0 1.037
IndexModeTest 14 0 0 0 1.008
-------------------------------------------------------------------------------
org.apache.cassandra.index.sasi.disk
Name Tests Errors Failures Skipped Time(s)
OnDiskIndexTest-cdc 12 0 0 0 17.079
PerSSTableIndexWriterTest-cdc 2 0 0 0 5.924
TokenTreeTest-cdc 14 0 0 0 13.242
OnDiskIndexTest-compression 12 0 0 0 16.903
PerSSTableIndexWriterTest-compression 2 0 0 0 6.161
TokenTreeTest-compression 14 0 0 0 13.395
OnDiskIndexTest 12 0 0 0 16.183
PerSSTableIndexWriterTest 2 0 0 0 5.894
TokenTreeTest 14 0 0 0 13.358
-------------------------------------------------------------------------------
org.apache.cassandra.index.sasi.plan
Name Tests Errors Failures Skipped Time(s)
ExpressionTest-cdc 2 0 0 0 0.077
OperationTest-cdc 6 0 0 0 5.029
ExpressionTest-compression 2 0 0 0 0.084
OperationTest-compression 6 0 0 0 4.596
ExpressionTest 2 0 0 0 0.083
OperationTest 6 0 0 0 4.462
-------------------------------------------------------------------------------
org.apache.cassandra.index.sasi.utils
Name Tests Errors Failures Skipped Time(s)
LongIteratorTest-cdc 2 0 0 0 0.064
MappedBufferTest-cdc 26 0 0 0 3.091
RangeIntersectionIteratorTest-cdc 11 0 0 0 0.275
RangeUnionIteratorTest-cdc 13 0 0 0 0.290
LongIteratorTest-compression 2 0 0 0 0.074
MappedBufferTest-compression 26 0 0 0 2.200
RangeIntersectionIteratorTest-compression 11 0 0 0 0.325
RangeUnionIteratorTest-compression 13 0 0 0 0.312
LongIteratorTest 2 0 0 0 0.072
MappedBufferTest 26 0 0 0 2.197
RangeIntersectionIteratorTest 11 0 0 0 0.315
RangeUnionIteratorTest 13 0 0 0 0.294
-------------------------------------------------------------------------------
org.apache.cassandra.io
Name Tests Errors Failures Skipped Time(s)
BloomFilterTrackerTest-cdc 3 0 0 0 0.060
DiskSpaceMetricsTest-cdc 2 0 0 0 23.038
BloomFilterTrackerTest-compression 3 0 0 0 0.068
DiskSpaceMetricsTest-compression 2 0 0 0 18.141
BloomFilterTrackerTest 3 0 0 0 0.069
DiskSpaceMetricsTest 2 0 0 0 17.794
-------------------------------------------------------------------------------
org.apache.cassandra.io.compress
Name Tests Errors Failures Skipped Time(s)
CQLCompressionTest-cdc 11 0 0 0 9.101
CompressedRandomAccessReaderTest-cdc 8 0 0 0 1.214
CompressedSequentialWriterReopenTest-cdc 4 0 0 0 7.921
CompressedSequentialWriterTest-cdc 14 0 0 0 1.851
CompressorTest-cdc 6 0 0 0 0.918
ZstdCompressorTest-cdc 3 0 0 0 0.290
CQLCompressionTest-compression 11 0 0 0 6.908
CompressedRandomAccessReaderTest- 8 0 0 0 1.305
compression
CompressedSequentialWriterReopenTest- 4 0 0 0 8.416
compression
CompressedSequentialWriterTest- 14 0 0 0 1.895
compression
CompressorTest-compression 6 0 0 0 0.880
ZstdCompressorTest-compression 3 0 0 0 0.277
CQLCompressionTest 11 0 0 0 6.899
CompressedRandomAccessReaderTest 8 0 0 0 1.286
CompressedSequentialWriterReopenTest 4 0 0 0 8.232
CompressedSequentialWriterTest 14 0 0 0 1.857
CompressorTest 6 0 0 0 0.828
ZstdCompressorTest 3 0 0 0 0.252
-------------------------------------------------------------------------------
org.apache.cassandra.io.sstable
Name Tests Errors Failures Skipped Time(s)
CQLSSTableWriterLongTest 1 0 0 0 5.866
BigTableWriterTest-cdc 5 0 0 0 3.711
CQLSSTableWriterClientTest-cdc 1 0 0 0 3.169
CQLSSTableWriterTest-cdc 11 0 0 0 28.056
DescriptorTest-cdc 7 0 0 0 1.074
IndexSummaryManagerTest-cdc 8 0 0 0 6.490
IndexSummaryRedistributionTest-cdc 1 0 0 0 6.195
IndexSummaryTest-cdc 12 0 0 0 35.748
LargePartitionsTest-cdc 1 0 0 1 0.071
LegacySSTableTest-cdc 11 0 0 1 59.155
SSTableCorruptionDetectionTest-cdc 2 0 0 0 48.956
SSTableHeaderFixTest-cdc 14 0 0 0 1.262
SSTableLoaderTest-cdc 3 0 0 0 20.847
SSTableMetadataTest-cdc 3 0 0 0 4.217
SSTableReaderTest-cdc 19 0 0 0 10.868
SSTableRewriterTest-cdc 20 0 0 0 15.457
SSTableScannerTest-cdc 3 0 0 0 3.372
SSTableWriterTest-cdc 5 0 0 0 31.625
BigTableWriterTest-compression 5 0 0 0 3.534
CQLSSTableWriterClientTest-compression 1 0 0 0 1.914
CQLSSTableWriterTest-compression 11 0 0 0 26.972
DescriptorTest-compression 7 0 0 0 0.950
IndexSummaryManagerTest-compression 8 0 0 0 6.416
IndexSummaryRedistributionTest- 1 0 0 0 4.288
compression
IndexSummaryTest-compression 12 0 0 0 32.426
LargePartitionsTest-compression 1 0 0 1 0.063
LegacySSTableTest-compression 11 0 0 1 55.985
SSTableCorruptionDetectionTest- 2 0 0 0 56.385
compression
SSTableHeaderFixTest-compression 14 0 0 0 1.358
SSTableLoaderTest-compression 3 0 0 0 21.121
SSTableMetadataTest-compression 3 0 0 0 3.834
SSTableReaderTest-compression 19 0 0 0 9.230
SSTableRewriterTest-compression 20 0 0 0 16.013
SSTableScannerTest-compression 3 0 0 0 3.954
SSTableWriterTest-compression 5 0 0 0 37.281
BigTableWriterTest 5 0 0 0 3.394
CQLSSTableWriterClientTest 1 0 0 0 1.860
CQLSSTableWriterTest 11 0 0 0 25.481
DescriptorTest 7 0 0 0 1.041
IndexSummaryManagerTest 8 0 0 0 6.459
IndexSummaryRedistributionTest 1 0 0 0 4.254
IndexSummaryTest 12 0 0 0 32.348
LargePartitionsTest 1 0 0 1 0.063
LegacySSTableTest 11 0 0 1 57.613
SSTableCorruptionDetectionTest 2 0 0 0 54.663
SSTableHeaderFixTest 14 0 0 0 1.266
SSTableLoaderTest 3 0 0 0 20.467
SSTableMetadataTest 3 0 0 0 3.602
SSTableReaderTest 19 0 0 0 8.643
SSTableRewriterTest 20 0 0 0 13.272
SSTableScannerTest 3 0 0 0 3.265
SSTableWriterTest 5 0 0 0 59.470
-------------------------------------------------------------------------------
org.apache.cassandra.io.sstable.format
Name Tests Errors Failures Skipped Time(s)
SSTableFlushObserverTest-cdc 1 0 0 0 2.007
SSTableFlushObserverTest-compression 1 0 0 0 2.654
SSTableFlushObserverTest 1 0 0 0 2.144
-------------------------------------------------------------------------------
org.apache.cassandra.io.sstable.format.big
Name Tests Errors Failures Skipped Time(s)
BigTableZeroCopyWriterTest-cdc 2 0 0 0 3.618
BigTableZeroCopyWriterTest-compression 2 0 0 0 3.852
BigTableZeroCopyWriterTest 2 0 0 0 3.447
-------------------------------------------------------------------------------
org.apache.cassandra.io.sstable.metadata
Name Tests Errors Failures Skipped Time(s)
MetadataSerializerTest-cdc 10 0 0 0 1.038
MetadataSerializerTest-compression 10 0 0 0 1.139
MetadataSerializerTest 10 0 0 0 1.151
-------------------------------------------------------------------------------
org.apache.cassandra.io.util
Name Tests Errors Failures Skipped Time(s)
BufferedDataOutputStreamTest-cdc 16 0 0 0 24.309
BufferedRandomAccessFileTest-cdc 17 0 0 0 1.025
ChecksummedRandomAccessReaderTest-cdc 3 0 0 0 0.846
ChecksummedSequentialWriterTest-cdc 7 0 0 0 0.859
DataOutputTest-cdc 15 0 0 0 0.852
DiskOptimizationStrategyTest-cdc 5 0 0 0 0.069
FileSegmentInputStreamTest-cdc 7 0 0 0 0.088
FileUtilsTest-cdc 4 0 0 0 0.769
MemoryTest-cdc 2 0 0 0 0.271
MmappedRegionsTest-cdc 12 0 0 0 0.978
NIODataInputStreamTest-cdc 17 0 0 0 9.182
RandomAccessReaderTest-cdc 11 0 0 0 1.270
RewindableDataInputStreamPlusTest-cdc 8 0 0 0 0.227
SafeMemoryWriterTest-cdc 2 0 0 0 2.156
SequentialWriterTest-cdc 7 0 0 0 0.850
BufferedDataOutputStreamTest-compression 16 0 0 0 27.129
BufferedRandomAccessFileTest-compression 17 0 0 0 1.397
ChecksummedRandomAccessReaderTest- 3 0 0 0 1.144
compression
ChecksummedSequentialWriterTest- 7 0 0 0 1.066
compression
DataOutputTest-compression 15 0 0 0 0.932
DiskOptimizationStrategyTest-compression 5 0 0 0 0.075
FileSegmentInputStreamTest-compression 7 0 0 0 0.100
FileUtilsTest-compression 4 0 0 0 1.055
MemoryTest-compression 2 0 0 0 0.319
MmappedRegionsTest-compression 12 0 0 0 1.261
NIODataInputStreamTest-compression 17 0 0 0 9.211
RandomAccessReaderTest-compression 11 0 0 0 1.396
RewindableDataInputStreamPlusTest- 8 0 0 0 0.248
compression
SafeMemoryWriterTest-compression 2 0 0 0 2.536
SequentialWriterTest-compression 7 0 0 0 0.918
BufferedDataOutputStreamTest 16 0 0 0 25.230
BufferedRandomAccessFileTest 17 0 0 0 1.121
ChecksummedRandomAccessReaderTest 3 0 0 0 0.926
ChecksummedSequentialWriterTest 7 0 0 0 0.873
DataOutputTest 15 0 0 0 0.901
DiskOptimizationStrategyTest 5 0 0 0 0.074
FileSegmentInputStreamTest 7 0 0 0 0.097
FileUtilsTest 4 0 0 0 0.899
MemoryTest 2 0 0 0 0.318
MmappedRegionsTest 12 0 0 0 1.082
NIODataInputStreamTest 17 0 0 0 8.874
RandomAccessReaderTest 11 0 0 0 1.379
RewindableDataInputStreamPlusTest 8 0 0 0 0.256
SafeMemoryWriterTest 2 0 0 0 2.543
SequentialWriterTest 7 0 0 0 0.847
-------------------------------------------------------------------------------
org.apache.cassandra.locator
Name Tests Errors Failures Skipped Time(s)
DynamicEndpointSnitchLongTest 1 0 0 0 23.168
AlibabaCloudSnitchTest-cdc 2 0 0 0 10.671
CloudstackSnitchTest-cdc 2 0 0 0 10.648
DynamicEndpointSnitchTest-cdc 1 0 0 0 2.158
EC2SnitchTest-cdc 13 0 0 0 10.635
GoogleCloudSnitchTest-cdc 2 0 0 0 10.690
GossipingPropertyFileSnitchTest-cdc 1 0 0 0 0.768
InetAddressAndPortSerializerTest-cdc 1 0 0 0 0.243
InetAddressAndPortTest-cdc 5 0 0 0 0.137
NetworkTopologyStrategyTest-cdc 5 0 0 0 2.950
PendingRangeMapsTest-cdc 2 0 0 0 0.396
PendingRangesTest-cdc 5 0 0 0 28.742
PropertyFileSnitchTest-cdc 5 0 0 0 15.947
ReconnectableSnitchHelperTest-cdc 1 0 0 0 0.985
ReplicaCollectionTest-cdc 6 0 0 0 0.723
ReplicaLayoutTest-cdc 1 0 0 0 0.411
ReplicaPlansTest-cdc 1 0 0 0 1.252
ReplicationFactorTest-cdc 2 0 0 0 0.798
ReplicationStrategyEndpointCacheTest-cdc 2 0 0 0 3.152
SimpleStrategyTest-cdc 7 0 0 0 3.178
TokenMetadataTest-cdc 6 0 0 0 0.832
AlibabaCloudSnitchTest-compression 2 0 0 0 10.719
CloudstackSnitchTest-compression 2 0 0 0 10.738
DynamicEndpointSnitchTest-compression 1 0 0 0 2.392
EC2SnitchTest-compression 13 0 0 0 10.624
GoogleCloudSnitchTest-compression 2 0 0 0 10.888
GossipingPropertyFileSnitchTest- 1 0 0 0 1.036
compression
InetAddressAndPortSerializerTest- 1 0 0 0 0.332
compression
InetAddressAndPortTest-compression 5 0 0 0 0.229
NetworkTopologyStrategyTest-compression 5 0 0 0 3.595
PendingRangeMapsTest-compression 2 0 0 0 0.564
PendingRangesTest-compression 5 0 0 0 36.678
PropertyFileSnitchTest-compression 5 0 0 0 16.324
ReconnectableSnitchHelperTest-compression 1 0 0 0 1.425
ReplicaCollectionTest-compression 6 0 0 0 1.109
ReplicaLayoutTest-compression 1 0 0 0 0.567
ReplicaPlansTest-compression 1 0 0 0 1.473
ReplicationFactorTest-compression 2 0 0 0 0.947
ReplicationStrategyEndpointCacheTest- 2 0 0 0 3.411
compression
SimpleStrategyTest-compression 7 0 0 0 3.314
TokenMetadataTest-compression 6 0 0 0 0.980
AlibabaCloudSnitchTest 2 0 0 0 10.639
CloudstackSnitchTest 2 0 0 0 10.642
DynamicEndpointSnitchTest 1 0 0 0 2.196
EC2SnitchTest 13 0 0 0 10.577
GoogleCloudSnitchTest 2 0 0 0 10.700
GossipingPropertyFileSnitchTest 1 0 0 0 0.827
InetAddressAndPortSerializerTest 1 0 0 0 0.274
InetAddressAndPortTest 5 0 0 0 0.154
NetworkTopologyStrategyTest 5 0 0 0 3.123
PendingRangeMapsTest 2 0 0 0 0.427
PendingRangesTest 5 0 0 0 29.721
PropertyFileSnitchTest 5 0 0 0 15.923
ReconnectableSnitchHelperTest 1 0 0 0 1.038
ReplicaCollectionTest 6 0 0 0 0.753
ReplicaLayoutTest 1 0 0 0 0.453
ReplicaPlansTest 1 0 0 0 1.386
ReplicationFactorTest 2 0 0 0 0.875
ReplicationStrategyEndpointCacheTest 2 0 0 0 3.112
SimpleStrategyTest 7 0 0 0 3.224
TokenMetadataTest 6 0 0 0 0.958
-------------------------------------------------------------------------------
org.apache.cassandra.metrics
Name Tests Errors Failures Skipped Time(s)
BatchMetricsTest-cdc 3 0 0 0 13.188
BufferPoolMetricsTest-cdc 4 0 0 0 0.925
CQLMetricsTest-cdc 4 0 0 0 6.817
CacheMetricsTest-cdc 1 0 0 0 0.277
CassandraMetricsRegistryTest-cdc 5 0 0 0 0.299
DecayingEstimatedHistogramReservoirTest- 15 0 0 1 12.909
cdc
HintedHandOffMetricsTest-cdc 1 0 0 0 1.922
KeyspaceMetricsTest-cdc 1 0 0 0 5.817
LatencyMetricsTest-cdc 3 0 0 0 0.288
MaxSamplerTest-cdc 8 0 0 0 5.187
SamplerTest-cdc 5 0 0 0 1.097
TableMetricsTest-cdc 9 0 0 0 10.890
TopFrequencySamplerTest-cdc 6 0 0 0 1.914
BatchMetricsTest-compression 3 0 0 0 12.142
BufferPoolMetricsTest-compression 4 0 0 0 1.175
CQLMetricsTest-compression 4 0 0 0 7.274
CacheMetricsTest-compression 1 0 0 0 0.324
CassandraMetricsRegistryTest-compression 5 0 0 0 0.309
DecayingEstimatedHistogramReservoirTest- 15 0 0 1 12.674
compression
HintedHandOffMetricsTest-compression 1 0 0 0 2.106
KeyspaceMetricsTest-compression 1 0 0 0 6.271
LatencyMetricsTest-compression 3 0 0 0 0.343
MaxSamplerTest-compression 8 0 0 0 5.141
SamplerTest-compression 5 0 0 0 1.255
TableMetricsTest-compression 9 0 0 0 14.245
TopFrequencySamplerTest-compression 6 0 0 0 2.123
BatchMetricsTest 3 0 0 0 12.571
BufferPoolMetricsTest 4 0 0 0 1.024
CQLMetricsTest 4 0 0 0 6.379
CacheMetricsTest 1 0 0 0 0.299
CassandraMetricsRegistryTest 5 0 0 0 0.311
DecayingEstimatedHistogramReservoirTest 15 0 0 1 12.562
HintedHandOffMetricsTest 1 0 0 0 2.036
KeyspaceMetricsTest 1 0 0 0 5.682
LatencyMetricsTest 3 0 0 0 0.319
MaxSamplerTest 8 0 0 0 5.091
SamplerTest 5 0 0 0 1.149
TableMetricsTest 9 0 0 0 9.740
TopFrequencySamplerTest 6 0 0 0 1.995
-------------------------------------------------------------------------------
org.apache.cassandra.net
Name Tests Errors Failures Skipped Time(s)
ConnectionBurnTest 1 0 0 0 124.115
AsyncChannelPromiseTest-cdc 4 0 0 0 0.410
AsyncMessageOutputPlusTest-cdc 1 0 0 0 0.891
AsyncOneResponseTest-cdc 2 0 0 0 4.249
AsyncPromiseTest-cdc 4 0 0 0 0.356
AsyncStreamingInputPlusTest-cdc 13 0 0 0 1.391
AsyncStreamingOutputPlusTest-cdc 3 0 0 0 0.886
ChunkedInputPlusTest-cdc 5 0 0 0 0.463
ConnectionTest-cdc 13 0 0 0 79.025
ForwardingInfoTest-cdc 2 0 0 0 0.251
FramingTest-cdc 4 0 0 0 22.908
HandshakeTest-cdc 13 0 0 0 2.302
ManyToOneConcurrentLinkedQueueTest-cdc 22 0 0 0 1.718
MessageSerializationPropertyTest-cdc 2 0 0 0 9.796
MessageTest-cdc 7 0 0 0 1.390
MessagingServiceTest-cdc 14 0 0 0 2.459
MockMessagingServiceTest-cdc 1 0 0 0 3.894
OutboundConnectionSettingsTest-cdc 9 0 0 0 2.126
OutboundConnectionsTest-cdc 6 0 0 0 2.201
OutboundMessageQueueTest-cdc 3 0 0 0 0.876
ProxyHandlerConnectionsTest-cdc 5 0 0 0 36.586
PrunableArrayQueueTest-cdc 9 0 0 0 0.064
ResourceLimitsTest-cdc 4 0 0 0 0.154
StartupClusterConnectivityCheckerTest-cdc 7 0 0 0 1.084
VerbTest-cdc 1 0 0 0 0.144
WriteCallbackInfoTest-cdc 1 0 0 0 1.444
AsyncChannelPromiseTest-compression 4 0 0 0 0.457
AsyncMessageOutputPlusTest-compression 1 0 0 0 0.973
AsyncOneResponseTest-compression 2 0 0 0 4.280
AsyncPromiseTest-compression 4 0 0 0 0.387
AsyncStreamingInputPlusTest-compression 13 0 0 0 1.458
AsyncStreamingOutputPlusTest-compression 3 0 0 0 0.981
ChunkedInputPlusTest-compression 5 0 0 0 0.563
ConnectionTest-compression 13 0 0 0 74.605
ForwardingInfoTest-compression 2 0 0 0 0.285
FramingTest-compression 4 0 0 0 24.152
HandshakeTest-compression 13 0 0 0 2.392
ManyToOneConcurrentLinkedQueueTest- 22 0 0 0 1.676
compression
MessageSerializationPropertyTest- 2 0 0 0 10.202
compression
MessageTest-compression 7 0 0 0 1.529
MessagingServiceTest-compression 14 0 0 0 2.996
MockMessagingServiceTest-compression 1 0 0 0 3.930
OutboundConnectionSettingsTest- 9 0 0 0 2.468
compression
OutboundConnectionsTest-compression 6 0 0 0 2.716
OutboundMessageQueueTest-compression 3 0 0 0 1.007
ProxyHandlerConnectionsTest-compression 5 0 0 0 35.975
PrunableArrayQueueTest-compression 9 0 0 0 0.108
ResourceLimitsTest-compression 4 0 0 0 0.190
StartupClusterConnectivityCheckerTest- 7 0 0 0 1.717
compression
VerbTest-compression 1 0 0 0 0.224
WriteCallbackInfoTest-compression 1 0 0 0 1.955
AsyncChannelPromiseTest 4 0 0 0 0.458
AsyncMessageOutputPlusTest 1 0 0 0 0.942
AsyncOneResponseTest 2 0 0 0 4.255
AsyncPromiseTest 4 0 0 0 0.369
AsyncStreamingInputPlusTest 13 0 0 0 1.449
AsyncStreamingOutputPlusTest 3 0 0 0 1.007
ChunkedInputPlusTest 5 0 0 0 0.556
ConnectionTest 13 0 0 0 75.908
ForwardingInfoTest 2 0 0 0 0.277
FramingTest 4 0 0 0 23.554
HandshakeTest 13 0 0 0 2.390
ManyToOneConcurrentLinkedQueueTest 22 0 0 0 1.696
MessageSerializationPropertyTest 2 0 0 0 9.539
MessageTest 7 0 0 0 1.533
MessagingServiceTest 14 0 0 0 2.358
MockMessagingServiceTest 1 0 0 0 3.729
OutboundConnectionSettingsTest 9 0 0 0 2.126
OutboundConnectionsTest 6 0 0 0 2.300
OutboundMessageQueueTest 3 0 0 0 0.969
ProxyHandlerConnectionsTest 5 0 0 0 35.971
PrunableArrayQueueTest 9 0 0 0 0.071
ResourceLimitsTest 4 0 0 0 0.154
StartupClusterConnectivityCheckerTest 7 0 0 0 1.168
VerbTest 1 0 0 0 0.160
WriteCallbackInfoTest 1 0 0 0 1.520
-------------------------------------------------------------------------------
org.apache.cassandra.net.proxy
Name Tests Errors Failures Skipped Time(s)
ProxyHandlerTest-cdc 3 0 0 0 0.781
ProxyHandlerTest-compression 3 0 0 0 0.866
ProxyHandlerTest 3 0 0 0 0.776
-------------------------------------------------------------------------------
org.apache.cassandra.repair
Name Tests Errors Failures Skipped Time(s)
AbstractRepairTest-cdc 1 0 0 1 0.056
LocalSyncTaskTest-cdc 6 0 0 0 4.360
RepairJobTest-cdc 16 0 0 0 4.298
RepairRunnableTest-cdc 2 0 0 0 0.794
RepairSessionTest-cdc 1 0 0 0 0.865
StreamingRepairTaskTest-cdc 2 0 0 0 3.230
SymmetricRemoteSyncTaskTest-cdc 1 0 0 0 0.853
ValidatorTest-cdc 6 0 0 0 27.520
AbstractRepairTest-compression 1 0 0 1 0.073
LocalSyncTaskTest-compression 6 0 0 0 4.502
RepairJobTest-compression 16 0 0 0 4.484
RepairRunnableTest-compression 2 0 0 0 0.889
RepairSessionTest-compression 1 0 0 0 0.985
StreamingRepairTaskTest-compression 2 0 0 0 3.275
SymmetricRemoteSyncTaskTest-compression 1 0 0 0 0.927
ValidatorTest-compression 6 0 0 0 29.770
AbstractRepairTest 1 0 0 1 0.059
LocalSyncTaskTest 6 0 0 0 4.261
RepairJobTest 16 0 0 0 4.318
RepairRunnableTest 2 0 0 0 0.836
RepairSessionTest 1 0 0 0 1.001
StreamingRepairTaskTest 2 0 0 0 3.221
SymmetricRemoteSyncTaskTest 1 0 0 0 0.962
ValidatorTest 6 0 0 0 29.228
-------------------------------------------------------------------------------
org.apache.cassandra.repair.asymmetric
Name Tests Errors Failures Skipped Time(s)
DifferenceHolderTest-cdc 2 0 0 0 0.300
RangeDenormalizerTest-cdc 3 0 0 0 0.252
ReduceHelperTest-cdc 5 0 0 0 0.284
StreamFromOptionsTest-cdc 3 0 0 0 0.115
DifferenceHolderTest-compression 2 0 0 0 0.386
RangeDenormalizerTest-compression 3 0 0 0 0.300
ReduceHelperTest-compression 5 0 0 0 0.336
StreamFromOptionsTest-compression 3 0 0 0 0.129
DifferenceHolderTest 2 0 0 0 0.355
RangeDenormalizerTest 3 0 0 0 0.297
ReduceHelperTest 5 0 0 0 0.330
StreamFromOptionsTest 3 0 0 0 0.139
-------------------------------------------------------------------------------
org.apache.cassandra.repair.consistent
Name Tests Errors Failures Skipped Time(s)
AbstractConsistentSessionTest-cdc 1 0 0 1 0.055
CoordinatorMessagingTest-cdc 7 0 0 0 5.949
CoordinatorSessionTest-cdc 7 0 0 0 0.964
CoordinatorSessionsTest-cdc 7 0 0 0 3.081
LocalSessionTest-cdc 40 0 0 0 5.339
PendingRepairStatTest-cdc 1 0 0 0 3.370
RepairStateTest-cdc 6 0 0 0 0.111
AbstractConsistentSessionTest-compression 1 0 0 1 0.071
CoordinatorMessagingTest-compression 7 0 0 0 7.058
CoordinatorSessionTest-compression 7 0 0 0 1.467
CoordinatorSessionsTest-compression 7 0 0 0 4.239
LocalSessionTest-compression 40 0 0 0 6.016
PendingRepairStatTest-compression 1 0 0 0 4.282
RepairStateTest-compression 6 0 0 0 0.161
AbstractConsistentSessionTest 1 0 0 1 0.061
CoordinatorMessagingTest 7 0 0 0 5.779
CoordinatorSessionTest 7 0 0 0 1.013
CoordinatorSessionsTest 7 0 0 0 3.152
LocalSessionTest 40 0 0 0 4.640
PendingRepairStatTest 1 0 0 0 3.416
RepairStateTest 6 0 0 0 0.122
-------------------------------------------------------------------------------
org.apache.cassandra.repair.consistent.admin
Name Tests Errors Failures Skipped Time(s)
SchemaArgsParserTest-cdc 5 0 0 0 3.087
SchemaArgsParserTest-compression 5 0 0 0 4.134
SchemaArgsParserTest 5 0 0 0 3.093
-------------------------------------------------------------------------------
org.apache.cassandra.repair.messages
Name Tests Errors Failures Skipped Time(s)
RepairMessageSerializationsTest-cdc 8 0 0 0 0.872
RepairMessageSerializerTest-cdc 6 0 0 0 0.520
RepairOptionTest-cdc 4 0 0 0 0.795
RepairMessageSerializationsTest- 8 0 0 0 1.239
compression
RepairMessageSerializerTest-compression 6 0 0 0 0.653
RepairOptionTest-compression 4 0 0 0 1.228
RepairMessageSerializationsTest 8 0 0 0 0.968
RepairMessageSerializerTest 6 0 0 0 0.513
RepairOptionTest 4 0 0 0 0.937
-------------------------------------------------------------------------------
org.apache.cassandra.schema
Name Tests Errors Failures Skipped Time(s)
CreateTableValidationTest-cdc 1 0 0 0 3.381
IndexMetadataTest-cdc 3 0 0 0 0.223
MigrationManagerTest-cdc 17 0 0 0 5.985
SchemaKeyspaceTest-cdc 5 0 0 0 4.081
SchemaTest-cdc 1 0 0 0 3.952
TupleTypesRepresentationTest-cdc 2 0 0 1 1.174
ValidationTest-cdc 4 0 0 0 0.396
CreateTableValidationTest-compression 1 0 0 0 4.819
IndexMetadataTest-compression 3 0 0 0 0.306
MigrationManagerTest-compression 17 0 0 0 6.838
SchemaKeyspaceTest-compression 5 0 0 0 4.534
SchemaTest-compression 1 0 0 0 3.382
TupleTypesRepresentationTest-compression 2 0 0 1 1.142
ValidationTest-compression 4 0 0 0 0.381
CreateTableValidationTest 1 0 0 0 3.308
IndexMetadataTest 3 0 0 0 0.242
MigrationManagerTest 17 0 0 0 5.408
SchemaKeyspaceTest 5 0 0 0 3.554
SchemaTest 1 0 0 0 2.490
TupleTypesRepresentationTest 2 0 0 1 0.922
ValidationTest 4 0 0 0 0.314
-------------------------------------------------------------------------------
org.apache.cassandra.security
Name Tests Errors Failures Skipped Time(s)
CipherFactoryTest-cdc 7 0 0 0 0.542
EncryptionUtilsTest-cdc 3 0 0 0 1.131
JKSKeyProviderTest-cdc 2 0 0 0 0.285
SSLFactoryTest-cdc 14 0 0 0 1.435
CipherFactoryTest-compression 7 0 0 0 0.686
EncryptionUtilsTest-compression 3 0 0 0 1.427
JKSKeyProviderTest-compression 2 0 0 0 0.381
SSLFactoryTest-compression 14 0 0 0 1.689
CipherFactoryTest 7 0 0 0 0.541
EncryptionUtilsTest 3 0 0 0 1.215
JKSKeyProviderTest 2 0 0 0 0.300
SSLFactoryTest 14 0 0 0 1.344
-------------------------------------------------------------------------------
org.apache.cassandra.serializers
Name Tests Errors Failures Skipped Time(s)
SimpleDateSerializerTest-cdc 9 0 0 0 0.106
TimeSerializerTest-cdc 16 0 0 0 0.070
TimestampSerializerTest-cdc 8 0 0 0 0.339
SimpleDateSerializerTest-compression 9 0 0 0 0.145
TimeSerializerTest-compression 16 0 0 0 0.104
TimestampSerializerTest-compression 8 0 0 0 0.395
SimpleDateSerializerTest 9 0 0 0 0.119
TimeSerializerTest 16 0 0 0 0.080
TimestampSerializerTest 8 0 0 0 0.317
-------------------------------------------------------------------------------
org.apache.cassandra.service
Name Tests Errors Failures Skipped Time(s)
ActiveRepairServiceTest-cdc 11 0 0 0 4.964
BootstrapTransientTest-cdc 1 0 0 0 0.899
ClientWarningsTest-cdc 4 0 0 0 27.867
GCInspectorTest-cdc 6 0 0 0 0.809
JoinTokenRingTest-cdc 1 0 0 0 5.291
LeaveAndBootstrapTest-cdc 8 0 0 0 5.851
LegacyAuthFailTest-cdc 1 0 0 0 4.984
MoveTest-cdc 7 0 0 0 22.267
MoveTransientTest-cdc 19 0 0 0 1.081
NativeTransportServiceTest-cdc 11 0 0 0 7.782
OptionalTasksTest-cdc 2 0 0 0 3.131
PaxosStateTest-cdc 2 0 0 0 5.000
ProtocolBetaVersionTest-cdc 2 0 0 0 13.105
QueryPagerTest-cdc 8 0 0 0 3.406
RMIServerSocketFactoryImplTest-cdc 1 0 0 0 0.061
RemoveTest-cdc 4 0 0 0 5.890
SerializationsTest-cdc 4 0 0 0 0.836
StartupChecksTest-cdc 3 0 0 0 2.550
StorageProxyTest-cdc 4 0 0 0 0.900
StorageServiceServerTest-cdc 19 0 0 1 8.351
StorageServiceTest-cdc 1 0 0 0 0.883
WriteResponseHandlerTest-cdc 5 0 0 0 3.270
WriteResponseHandlerTransientTest-cdc 4 0 0 0 3.091
ActiveRepairServiceTest-compression 11 0 0 0 4.645
BootstrapTransientTest-compression 1 0 0 0 1.133
ClientWarningsTest-compression 4 0 0 0 32.038
GCInspectorTest-compression 6 0 0 0 1.229
JoinTokenRingTest-compression 1 0 0 0 8.550
LeaveAndBootstrapTest-compression 8 0 0 0 7.108
LegacyAuthFailTest-compression 1 0 0 0 4.627
MoveTest-compression 7 0 0 0 23.325
MoveTransientTest-compression 19 0 0 0 1.268
NativeTransportServiceTest-compression 11 0 0 0 8.061
OptionalTasksTest-compression 2 0 0 0 3.677
PaxosStateTest-compression 2 0 0 0 6.610
ProtocolBetaVersionTest-compression 2 0 0 0 13.167
QueryPagerTest-compression 8 0 0 0 3.714
RMIServerSocketFactoryImplTest- 1 0 0 0 0.076
compression
RemoveTest-compression 4 0 0 0 5.917
SerializationsTest-compression 4 0 0 0 0.939
StartupChecksTest-compression 3 0 0 0 2.699
StorageProxyTest-compression 4 0 0 0 1.038
StorageServiceServerTest-compression 19 0 0 1 8.479
StorageServiceTest-compression 1 0 0 0 0.964
WriteResponseHandlerTest-compression 5 0 0 0 3.738
WriteResponseHandlerTransientTest- 4 0 0 0 3.320
compression
ActiveRepairServiceTest 11 0 0 0 3.658
BootstrapTransientTest 1 0 0 0 0.928
ClientWarningsTest 4 0 0 0 26.850
GCInspectorTest 6 0 0 0 0.902
JoinTokenRingTest 1 0 0 0 4.672
LeaveAndBootstrapTest 8 0 0 0 5.397
LegacyAuthFailTest 1 0 0 0 4.531
MoveTest 7 0 0 0 22.396
MoveTransientTest 19 0 0 0 1.153
NativeTransportServiceTest 11 0 0 0 7.804
OptionalTasksTest 2 0 0 0 3.140
PaxosStateTest 2 0 0 0 4.598
ProtocolBetaVersionTest 2 0 0 0 12.485
QueryPagerTest 8 0 0 0 3.353
RMIServerSocketFactoryImplTest 1 0 0 0 0.069
RemoveTest 4 0 0 0 5.872
SerializationsTest 4 0 0 0 0.895
StartupChecksTest 3 0 0 0 2.652
StorageProxyTest 4 0 0 0 0.974
StorageServiceServerTest 19 0 0 1 8.379
StorageServiceTest 1 0 0 0 0.984
WriteResponseHandlerTest 5 0 0 0 3.201
WriteResponseHandlerTransientTest 4 0 0 0 3.179
-------------------------------------------------------------------------------
org.apache.cassandra.service.pager
Name Tests Errors Failures Skipped Time(s)
PagingStateTest-cdc 7 0 0 0 0.925
PagingStateTest-compression 7 0 0 0 1.045
PagingStateTest 7 0 0 0 1.053
-------------------------------------------------------------------------------
org.apache.cassandra.service.reads
Name Tests Errors Failures Skipped Time(s)
AbstractReadResponseTest-cdc 1 0 0 1 0.054
DataResolverTest-cdc 32 0 0 0 3.548
DigestResolverTest-cdc 5 0 0 0 3.365
ReadExecutorTest-cdc 3 0 0 0 3.378
SpeculativeRetryParseTest-cdc 78 0 0 0 0.104
AbstractReadResponseTest-compression 1 0 0 1 0.066
DataResolverTest-compression 32 0 0 0 3.700
DigestResolverTest-compression 5 0 0 0 3.347
ReadExecutorTest-compression 3 0 0 0 4.114
SpeculativeRetryParseTest-compression 78 0 0 0 0.129
AbstractReadResponseTest 1 0 0 1 0.066
DataResolverTest 32 0 0 0 3.591
DigestResolverTest 5 0 0 0 3.365
ReadExecutorTest 3 0 0 0 3.324
SpeculativeRetryParseTest 78 0 0 0 0.141
-------------------------------------------------------------------------------
org.apache.cassandra.service.reads.repair
Name Tests Errors Failures Skipped Time(s)
AbstractReadRepairTest-cdc 1 0 0 1 0.054
BlockingReadRepairTest-cdc 9 0 0 0 3.424
DiagEventsBlockingReadRepairTest-cdc 3 0 0 0 3.397
ReadOnlyReadRepairTest-cdc 4 0 0 0 3.152
ReadRepairTest-cdc 7 0 0 0 3.359
RepairedDataVerifierTest-cdc 10 0 0 0 4.977
AbstractReadRepairTest-compression 1 0 0 1 0.078
BlockingReadRepairTest-compression 9 0 0 0 3.850
DiagEventsBlockingReadRepairTest- 3 0 0 0 4.080
compression
ReadOnlyReadRepairTest-compression 4 0 0 0 3.771
ReadRepairTest-compression 7 0 0 0 3.834
RepairedDataVerifierTest-compression 10 0 0 0 7.203
AbstractReadRepairTest 1 0 0 1 0.068
BlockingReadRepairTest 9 0 0 0 3.410
DiagEventsBlockingReadRepairTest 3 0 0 0 3.453
ReadOnlyReadRepairTest 4 0 0 0 3.239
ReadRepairTest 7 0 0 0 3.368
RepairedDataVerifierTest 10 0 0 0 4.643
-------------------------------------------------------------------------------
org.apache.cassandra.streaming
Name Tests Errors Failures Skipped Time
(s)
LongStreamingTest 0 1 0 0 0.879
EntireSSTableStreamingCorrectFilesCountTest- 1 0 0 0 3.486
cdc
SessionInfoTest-cdc 1 0 0 0 0.505
StreamOperationTest-cdc 1 0 0 0 0.060
StreamTransferTaskTest-cdc 2 0 0 0 3.250
StreamingTransferTest-cdc 5 0 0 0 14.222
EntireSSTableStreamingCorrectFilesCountTest- 1 0 0 0 3.894
compression
SessionInfoTest-compression 1 0 0 0 0.589
StreamOperationTest-compression 1 0 0 0 0.078
StreamTransferTaskTest-compression 2 0 0 0 3.525
StreamingTransferTest-compression 5 0 0 0 14.741
EntireSSTableStreamingCorrectFilesCountTest 1 0 0 0 3.513
SessionInfoTest 1 0 0 0 0.506
StreamOperationTest 1 0 0 0 0.065
StreamTransferTaskTest 2 0 0 0 3.219
StreamingTransferTest 5 0 0 0 14.268
-------------------------------------------------------------------------------
org.apache.cassandra.streaming.async
Name Tests Errors Failures Skipped Time(s)
NettyStreamingMessageSenderTest-cdc 10 0 0 0 0.979
StreamCompressionSerializerTest-cdc 2 0 0 0 0.817
StreamingInboundHandlerTest-cdc 6 0 0 0 0.932
NettyStreamingMessageSenderTest- 10 0 0 0 1.187
compression
StreamCompressionSerializerTest- 2 0 0 0 1.026
compression
StreamingInboundHandlerTest-compression 6 0 0 0 1.195
NettyStreamingMessageSenderTest 10 0 0 0 0.993
StreamCompressionSerializerTest 2 0 0 0 0.838
StreamingInboundHandlerTest 6 0 0 0 1.003
-------------------------------------------------------------------------------
org.apache.cassandra.streaming.compression
Name Tests Errors Failures Skipped Time(s)
CompressedInputStreamTest-cdc 6 0 0 0 1.079
CompressedInputStreamTest-compression 6 0 0 0 1.269
CompressedInputStreamTest 6 0 0 0 1.101
-------------------------------------------------------------------------------
org.apache.cassandra.streaming.messages
Name Tests Errors Failures Skipped Time(s)
StreamMessageTest-cdc 1 0 0 0 0.080
StreamMessageTest-compression 1 0 0 0 0.099
StreamMessageTest 1 0 0 0 0.088
-------------------------------------------------------------------------------
org.apache.cassandra.stress.generate
Name Tests Errors Failures Skipped Time(s)
DistributionGaussianTest 2 0 0 0 0.130
DistributionSequenceTest 4 0 0 0 0.076
-------------------------------------------------------------------------------
org.apache.cassandra.stress.settings
Name Tests Errors Failures Skipped Time(s)
OptionReplicationTest 1 0 0 0 0.096
SettingsMiscTest 4 0 0 0 0.100
SettingsNodeTest 2 0 0 0 0.071
StressSettingsTest 1 0 0 0 0.581
-------------------------------------------------------------------------------
org.apache.cassandra.stress.util
Name Tests Errors Failures Skipped Time(s)
MultiResultLoggerTest 5 0 0 0 0.072
-------------------------------------------------------------------------------
org.apache.cassandra.tools
Name Tests Errors Failures Skipped Time(s)
AuditLogViewerTest-cdc 10 0 0 0 14.910
BulkLoaderTest-cdc 6 0 0 0 12.678
ClearSnapshotTest-cdc 4 0 0 0 13.905
CompactionStressTest-cdc 2 0 0 0 14.717
GetFullQueryLogTest-cdc 3 0 0 0 15.016
GetVersionTest-cdc 1 0 0 0 0.368
JMXCompatabilityTest-cdc 3 0 0 0 33.194
JMXToolTest-cdc 5 0 0 0 11.006
LoaderOptionsTest-cdc 1 0 0 0 0.508
SSTableExpiredBlockersTest-cdc 4 0 0 0 2.114
SSTableExportTest-cdc 10 0 0 0 1.319
SSTableLevelResetterTest-cdc 5 0 0 0 2.140
SSTableMetadataViewerTest-cdc 7 0 0 0 0.525
SSTableOfflineRelevelTest-cdc 4 0 0 0 2.070
SSTableRepairedAtSetterTest-cdc 6 0 0 0 0.993
StandaloneSSTableUtilTest-cdc 8 0 0 0 2.158
StandaloneScrubberTest-cdc 7 0 0 0 2.193
StandaloneSplitterTest-cdc 6 0 0 0 2.126
StandaloneUpgraderTest-cdc 6 0 0 0 2.195
StandaloneVerifierTest-cdc 10 0 0 0 2.207
ToolsEnvsConfigsTest-cdc 1 0 0 0 2.003
TopPartitionsTest-cdc 2 0 0 0 3.587
AuditLogViewerTest-compression 10 0 0 0 15.723
BulkLoaderTest-compression 6 0 0 0 13.298
ClearSnapshotTest-compression 4 0 0 0 13.161
CompactionStressTest-compression 2 0 0 0 15.294
GetFullQueryLogTest-compression 3 0 0 0 15.555
GetVersionTest-compression 1 0 0 0 0.525
JMXCompatabilityTest-compression 3 0 0 0 34.790
JMXToolTest-compression 5 0 0 0 11.145
LoaderOptionsTest-compression 1 0 0 0 0.617
SSTableExpiredBlockersTest-compression 4 0 0 0 2.390
SSTableExportTest-compression 10 0 0 0 1.369
SSTableLevelResetterTest-compression 5 0 0 0 2.465
SSTableMetadataViewerTest-compression 7 0 0 0 0.626
SSTableOfflineRelevelTest-compression 4 0 0 0 2.781
SSTableRepairedAtSetterTest-compression 6 0 0 0 1.481
StandaloneSSTableUtilTest-compression 8 0 0 0 2.725
StandaloneScrubberTest-compression 7 0 0 0 2.939
StandaloneSplitterTest-compression 6 0 0 0 2.376
StandaloneUpgraderTest-compression 6 0 0 0 2.363
StandaloneVerifierTest-compression 10 0 0 0 2.437
ToolsEnvsConfigsTest-compression 1 0 0 0 2.030
TopPartitionsTest-compression 2 0 0 0 3.898
AuditLogViewerTest 10 0 0 0 14.614
BulkLoaderTest 6 0 0 0 12.728
ClearSnapshotTest 4 0 0 0 12.881
CompactionStressTest 2 0 0 0 14.658
GetFullQueryLogTest 3 0 0 0 14.351
GetVersionTest 1 0 0 0 0.403
JMXCompatabilityTest 3 0 0 0 30.647
JMXToolTest 5 0 0 0 10.639
LoaderOptionsTest 1 0 0 0 0.565
SSTableExpiredBlockersTest 4 0 0 0 2.275
SSTableExportTest 10 0 0 0 1.321
SSTableLevelResetterTest 5 0 0 0 2.211
SSTableMetadataViewerTest 7 0 0 0 0.556
SSTableOfflineRelevelTest 4 0 0 0 2.291
SSTableRepairedAtSetterTest 6 0 0 0 1.116
StandaloneSSTableUtilTest 8 0 0 0 2.276
StandaloneScrubberTest 7 0 0 0 2.287
StandaloneSplitterTest 6 0 0 0 2.266
StandaloneUpgraderTest 6 0 0 0 2.244
StandaloneVerifierTest 10 0 0 0 2.255
ToolsEnvsConfigsTest 1 0 0 0 2.020
TopPartitionsTest 2 0 0 0 3.716
-------------------------------------------------------------------------------
org.apache.cassandra.tools.cassandrastress
Name Tests Errors Failures Skipped Time(s)
CassandrastressTest-cdc 1 0 0 0 13.278
CassandrastressTest-compression 1 0 0 0 14.672
CassandrastressTest 1 0 0 0 15.608
-------------------------------------------------------------------------------
org.apache.cassandra.tools.cqlsh
Name Tests Errors Failures Skipped Time(s)
CqlshTest-cdc 1 0 0 0 13.106
CqlshTest-compression 1 0 0 0 13.460
CqlshTest 1 0 0 0 13.033
-------------------------------------------------------------------------------
org.apache.cassandra.tools.nodetool.formatter
Name Tests Errors Failures Skipped Time(s)
TableBuilderTest-cdc 6 0 0 0 0.064
TableBuilderTest-compression 6 0 0 0 0.081
TableBuilderTest 6 0 0 0 0.091
-------------------------------------------------------------------------------
org.apache.cassandra.tools.nodetool.stats
Name Tests Errors Failures Skipped Time(s)
StatsTableComparatorTest-cdc 6 0 0 0 0.227
TableStatsPrinterTest-cdc 2 0 0 0 0.083
StatsTableComparatorTest-compression 6 0 0 0 0.277
TableStatsPrinterTest-compression 2 0 0 0 0.116
StatsTableComparatorTest 6 0 0 0 0.323
TableStatsPrinterTest 2 0 0 0 0.142
-------------------------------------------------------------------------------
org.apache.cassandra.tracing
Name Tests Errors Failures Skipped Time(s)
TracingTest-cdc 6 0 0 0 0.854
TracingTest-compression 6 0 0 0 0.984
TracingTest 6 0 0 0 1.185
-------------------------------------------------------------------------------
org.apache.cassandra.transport
Name Tests Errors Failures Skipped Time(s)
CBUtilTest-cdc 4 0 0 0 0.305
CQLUserAuditTest-cdc 8 0 0 0 29.139
DataTypeTest-cdc 3 0 0 0 0.338
ErrorMessageTest-cdc 7 0 0 0 0.350
IdleDisconnectTest-cdc 2 0 0 0 17.753
InflightRequestPayloadTrackerTest-cdc 6 0 0 0 15.459
MessagePayloadTest-cdc 3 0 0 0 14.227
ProtocolErrorTest-cdc 6 0 0 0 0.945
ProtocolVersionTest-cdc 4 0 0 0 0.848
ProtocolVersionTrackerTest-cdc 3 0 0 0 0.289
SerDeserTest-cdc 6 0 0 0 1.435
ServerMetricsTest-cdc 1 0 0 0 12.605
StartupMessageTest-cdc 1 0 0 0 12.707
CBUtilTest-compression 4 0 0 0 0.342
CQLUserAuditTest-compression 8 0 0 0 30.070
DataTypeTest-compression 3 0 0 0 0.377
ErrorMessageTest-compression 7 0 0 0 0.399
IdleDisconnectTest-compression 2 0 0 0 17.743
InflightRequestPayloadTrackerTest- 6 0 0 0 14.823
compression
MessagePayloadTest-compression 3 0 0 0 13.784
ProtocolErrorTest-compression 6 0 0 0 1.107
ProtocolVersionTest-compression 4 0 0 0 0.830
ProtocolVersionTrackerTest-compression 3 0 0 0 0.334
SerDeserTest-compression 6 0 0 0 1.812
ServerMetricsTest-compression 1 0 0 0 12.504
StartupMessageTest-compression 1 0 0 0 12.401
CBUtilTest 4 0 0 0 0.441
CQLUserAuditTest 8 0 0 0 30.345
DataTypeTest 3 0 0 0 0.399
ErrorMessageTest 7 0 0 0 0.439
IdleDisconnectTest 2 0 0 0 17.591
InflightRequestPayloadTrackerTest 6 0 0 0 19.760
MessagePayloadTest 3 0 0 0 15.016
ProtocolErrorTest 6 0 0 0 1.627
ProtocolVersionTest 4 0 0 0 0.981
ProtocolVersionTrackerTest 3 0 0 0 0.381
SerDeserTest 6 0 0 0 1.654
ServerMetricsTest 1 0 0 0 12.575
StartupMessageTest 1 0 0 0 14.347
-------------------------------------------------------------------------------
org.apache.cassandra.transport.frame.checksum
Name Tests Errors Failures Skipped Time
(s)
ChecksummingTransformerTest-cdc 5 0 0 0 16.832
ChecksummingWithCorruptedLZ4DoesNotCrashTest- 1 0 0 0 22.369
cdc
ChecksummingTransformerTest-compression 5 0 0 0 18.204
ChecksummingWithCorruptedLZ4DoesNotCrashTest- 1 0 0 0 23.491
compression
ChecksummingTransformerTest 5 0 0 0 17.956
ChecksummingWithCorruptedLZ4DoesNotCrashTest 1 0 0 0 23.569
-------------------------------------------------------------------------------
org.apache.cassandra.transport.messages
Name Tests Errors Failures Skipped Time(s)
AuthenticateMessageTest-cdc 1 0 0 0 0.369
PrepareMessageTest-cdc 1 0 0 0 0.319
AuthenticateMessageTest-compression 1 0 0 0 0.351
PrepareMessageTest-compression 1 0 0 0 0.368
AuthenticateMessageTest 1 0 0 0 0.386
PrepareMessageTest 1 0 0 0 0.365
-------------------------------------------------------------------------------
org.apache.cassandra.triggers
Name Tests Errors Failures Skipped Time(s)
TriggerExecutorTest-cdc 9 0 0 0 1.566
TriggersSchemaTest-cdc 4 0 0 0 3.869
TriggersTest-cdc 7 0 0 0 5.133
TriggerExecutorTest-compression 9 0 0 0 1.635
TriggersSchemaTest-compression 4 0 0 0 3.748
TriggersTest-compression 7 0 0 0 4.646
TriggerExecutorTest 9 0 0 0 1.670
TriggersSchemaTest 4 0 0 0 5.439
TriggersTest 7 0 0 0 6.290
-------------------------------------------------------------------------------
org.apache.cassandra.utils
Name Tests Errors Failures Skipped Time(s)
LongBloomFilterTest 5 0 0 0 130.118
LongBTreeTest 15 0 0 0 876.583
AbstractIteratorTest-cdc 9 0 0 0 0.084
BloomFilterTest-cdc 11 0 0 2 0.819
ByteArrayUtilTest-cdc 18 0 0 0 0.227
ByteBufferUtilTest-cdc 12 0 0 0 0.364
BytesReadTrackerTest-cdc 4 0 0 0 0.061
CassandraVersionTest-cdc 11 0 0 0 0.528
EstimatedHistogramTest-cdc 7 0 0 0 0.208
FBUtilitiesTest-cdc 7 0 0 0 0.672
FastByteOperationsTest-cdc 2 0 0 0 4.100
GeneratorsTest-cdc 2 0 0 0 0.928
HexTest-cdc 2 0 0 0 0.217
HistogramBuilderTest-cdc 5 0 0 0 0.268
IntegerIntervalsTest-cdc 6 0 0 0 50.116
IntervalTreeTest-cdc 3 0 0 0 0.389
JVMStabilityInspectorTest-cdc 3 0 0 0 1.016
JavaUtilsTest-cdc 1 0 0 0 0.260
MergeIteratorComparisonTest-cdc 16 0 0 0 15.787
MergeIteratorTest-cdc 1 0 0 0 0.099
MerkleTreeTest-cdc 27 0 0 0 9.054
MerkleTreesTest-cdc 13 0 0 0 1.023
MonotonicClockTest-cdc 1 0 0 0 7.815
NativeLibraryTest-cdc 2 0 0 0 0.468
NoSpamLoggerTest-cdc 4 0 0 0 0.071
OverlapIteratorTest-cdc 1 0 0 0 11.898
SerializationsTest-cdc 3 0 0 0 1.402
SlidingTimeRateTest-cdc 7 0 0 0 0.546
StatusLoggerTest-cdc 1 0 0 0 3.428
AbstractIteratorTest-compression 9 0 0 0 0.112
BloomFilterTest-compression 11 0 0 2 0.720
ByteArrayUtilTest-compression 18 0 0 0 0.294
ByteBufferUtilTest-compression 12 0 0 0 0.475
BytesReadTrackerTest-compression 4 0 0 0 0.088
CassandraVersionTest-compression 11 0 0 0 0.752
EstimatedHistogramTest-compression 7 0 0 0 0.304
FBUtilitiesTest-compression 7 0 0 0 0.896
FastByteOperationsTest-compression 2 0 0 0 4.356
GeneratorsTest-compression 2 0 0 0 0.985
HexTest-compression 2 0 0 0 0.259
HistogramBuilderTest-compression 5 0 0 0 0.320
IntegerIntervalsTest-compression 6 0 0 0 50.176
IntervalTreeTest-compression 3 0 0 0 0.280
JVMStabilityInspectorTest-compression 3 0 0 0 0.890
JavaUtilsTest-compression 1 0 0 0 0.256
MergeIteratorComparisonTest-compression 16 0 0 0 15.457
MergeIteratorTest-compression 1 0 0 0 0.089
MerkleTreeTest-compression 27 0 0 0 6.918
MerkleTreesTest-compression 13 0 0 0 0.954
MonotonicClockTest-compression 1 0 0 0 18.886
NativeLibraryTest-compression 2 0 0 0 0.479
NoSpamLoggerTest-compression 4 0 0 0 0.087
OverlapIteratorTest-compression 1 0 0 0 11.720
SerializationsTest-compression 3 0 0 0 1.575
SlidingTimeRateTest-compression 7 0 0 0 0.557
StatusLoggerTest-compression 1 0 0 0 3.632
AbstractIteratorTest 9 0 0 0 0.091
BloomFilterTest 11 0 0 2 0.599
ByteArrayUtilTest 18 0 0 0 0.297
ByteBufferUtilTest 12 0 0 0 0.411
BytesReadTrackerTest 4 0 0 0 0.072
CassandraVersionTest 11 0 0 0 0.694
EstimatedHistogramTest 7 0 0 0 0.278
FBUtilitiesTest 7 0 0 0 0.742
FastByteOperationsTest 2 0 0 0 3.844
GeneratorsTest 2 0 0 0 0.915
HexTest 2 0 0 0 0.287
HistogramBuilderTest 5 0 0 0 0.350
IntegerIntervalsTest 6 0 0 0 53.070
IntervalTreeTest 3 0 0 0 0.402
JVMStabilityInspectorTest 3 0 0 0 0.869
JavaUtilsTest 1 0 0 0 0.220
MergeIteratorComparisonTest 16 0 0 0 12.456
MergeIteratorTest 1 0 0 0 0.081
MerkleTreeTest 27 0 0 0 6.726
MerkleTreesTest 13 0 0 0 0.953
MonotonicClockTest 1 0 0 0 18.419
NativeLibraryTest 2 0 0 0 0.470
NoSpamLoggerTest 4 0 0 0 0.088
OverlapIteratorTest 1 0 0 0 11.476
SerializationsTest 3 0 0 0 1.460
SlidingTimeRateTest 7 0 0 0 0.505
StatusLoggerTest 1 0 0 0 3.435
-------------------------------------------------------------------------------
org.apache.cassandra.utils.binlog
Name Tests Errors Failures Skipped Time(s)
BinLogTest-cdc 13 0 0 0 11.292
DeletingArchiverTest-cdc 3 0 0 0 0.260
ExternalArchiverTest-cdc 5 0 0 0 10.411
BinLogTest-compression 13 0 0 0 11.256
DeletingArchiverTest-compression 3 0 0 0 0.283
ExternalArchiverTest-compression 5 0 0 0 10.468
BinLogTest 13 0 0 0 11.201
DeletingArchiverTest 3 0 0 0 0.276
ExternalArchiverTest 5 0 0 0 10.429
-------------------------------------------------------------------------------
org.apache.cassandra.utils.btree
Name Tests Errors Failures Skipped Time(s)
BTreeRemovalTest-cdc 22 0 0 0 0.287
BTreeSearchIteratorTest-cdc 4 0 0 0 0.082
BTreeTest-cdc 14 0 0 0 0.458
BTreeRemovalTest-compression 22 0 0 0 0.216
BTreeSearchIteratorTest-compression 4 0 0 0 0.089
BTreeTest-compression 14 0 0 0 0.476
BTreeRemovalTest 22 0 0 0 0.227
BTreeSearchIteratorTest 4 0 0 0 0.075
BTreeTest 14 0 0 0 0.459
-------------------------------------------------------------------------------
org.apache.cassandra.utils.concurrent
Name Tests Errors Failures Skipped Time(s)
AbstractTransactionalTest-cdc 1 0 0 1 0.055
AccumulatorTest-cdc 4 0 0 0 0.060
RefCountedTest-cdc 12 0 0 0 6.207
WeightedQueueTest-cdc 46 0 0 0 0.985
AbstractTransactionalTest-compression 1 0 0 1 0.072
AccumulatorTest-compression 4 0 0 0 0.083
RefCountedTest-compression 12 0 0 0 6.189
WeightedQueueTest-compression 46 0 0 0 0.990
AbstractTransactionalTest 1 0 0 1 0.058
AccumulatorTest 4 0 0 0 0.072
RefCountedTest 12 0 0 0 5.806
WeightedQueueTest 46 0 0 0 0.968
-------------------------------------------------------------------------------
org.apache.cassandra.utils.memory
Name Tests Errors Failures Skipped Time(s)
LongBufferPoolTest 1 0 0 0 120.929
BufferPoolTest-cdc 32 0 0 0 8.722
NativeAllocatorTest-cdc 1 0 0 0 0.362
BufferPoolTest-compression 32 0 0 0 8.026
NativeAllocatorTest-compression 1 0 0 0 0.416
BufferPoolTest 32 0 0 0 7.919
NativeAllocatorTest 1 0 0 0 0.400
-------------------------------------------------------------------------------
org.apache.cassandra.utils.obs
Name Tests Errors Failures Skipped Time(s)
OffHeapBitSetTest-cdc 4 0 0 0 0.462
OffHeapBitSetTest-compression 4 0 0 0 0.518
OffHeapBitSetTest 4 0 0 0 0.495
-------------------------------------------------------------------------------
org.apache.cassandra.utils.streamhist
Name Tests Errors Failures Skipped Time(s)
StreamingTombstoneHistogramBuilderTest- 11 0 0 0 1.807
cdc
StreamingTombstoneHistogramBuilderTest- 11 0 0 0 2.613
compression
StreamingTombstoneHistogramBuilderTest 11 0 0 0 2.006
-------------------------------------------------------------------------------
org.apache.cassandra.utils.vint
Name Tests Errors Failures Skipped Time(s)
VIntCodingTest-cdc 4 0 0 0 0.221
VIntCodingTest-compression 4 0 0 0 0.266
VIntCodingTest 4 0 0 0 0.259
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Failures
-------------------------------------------------------------------------------
Cassandra dtests // test_paging_with_filtering_on_counter_columns_compact // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_filtering_on_counter_columns_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f39e70902e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f39e45da3a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f39e8a7f4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f39e5454700>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_filtering_on_counter_columns_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_cql_read_compatibility // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cql_read_compatibility'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f39e70902e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f39e684dfd0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f39e8a7f4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f39e73fc850>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cql_read_compatibility'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_get_range_slice_after_deletion // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_range_slice_after_deletion'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f39e70902e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f39e68447f0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f39e8a7f4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f39e5614d30>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_range_slice_after_deletion'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_remove_column_ttl_with_default_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_remove_column_ttl_with_default_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f39e70902e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f39e67b1a00>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f39e8a7f4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f39e67b1d90>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_remove_column_ttl_with_default_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_async_1 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_1'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f39e70902e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f39e6836880>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f39e8a7f4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f39e677c370>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_1'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_large_collection_errors // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_large_collection_errors'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f92f8287430>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f92f7817040>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f92f9ac44c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f92f78171f0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_large_collection_errors'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_get_range_slice_super // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_range_slice_super'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f92f8287430>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f92f9a804f0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f92f9ac44c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f92f842ec40>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_range_slice_super'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_datetime_values // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_datetime_values'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f92f8287430>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f92f8747100>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f92f9ac44c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f92f828f370>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_datetime_values'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_cql3_insert_thrift // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_cql3_insert_thrift'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5cb44458e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5cb48b7340>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5cb5c495e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5cb43c6eb0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_cql3_insert_thrift'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests /
/ test_paging_with_filtering_on_partition_key_on_clustering_columns_compact // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_filtering_on_partition_key_on_clustering_columns_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5cb44458e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5cb43c8df0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5cb5c495e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5cb45b4160>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_filtering_on_partition_key_on_clustering_columns_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_get_range_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_get_range_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5cb44458e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5cb19746a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5cb5c495e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5cb399f1f0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_get_range_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_only_superuser_can_create_users // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_only_superuser_can_create_users'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fbea634c7f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fbea634c310>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fbea7ad93a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fbea6322190>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_only_superuser_can_create_users'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_rename // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_rename'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fbea634c7f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fbea584aa30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fbea7ad93a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fbea634c040>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_rename'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_8280_validate_indexed_values_compact // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_8280_validate_indexed_values_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fbea634c7f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fbea6723af0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fbea7ad93a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fbea584af10>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_8280_validate_indexed_values_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_wrapped_range_slices // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_wrapped_range_slices'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fbea634c7f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fbea4626820>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fbea7ad93a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fbea5867610>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_wrapped_range_slices'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_password_authenticator_create_user_requires_password /
/ Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_password_authenticator_create_user_requires_password'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc1434d9ca0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc1434d9160>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc144c594c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc1434d91c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_password_authenticator_create_user_requires_password'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_get_slice_by_names // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_slice_by_names'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc1434d9ca0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc141f7cfd0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc144c594c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc140f69460>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_slice_by_names'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_paging_on_compact_table_with_tombstone_on_first_column /
/ Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_on_compact_table_with_tombstone_on_first_column'>>
dtest_config = <dtest_config.DTestConfig object at 0x7faa33023310>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7faa327dec40>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7faa34a39550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7faa3063b5b0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_on_compact_table_with_tombstone_on_first_column'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multiget_slice_with_compact_table // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_multiget_slice_with_compact_table'>>
dtest_config = <dtest_config.DTestConfig object at 0x7faa33023310>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7faa3322c070>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7faa34a39550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7faa3262f7c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_multiget_slice_with_compact_table'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multiget_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multiget_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7efe972cbf40>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7efe6195b160>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7efe98cdb430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7efe9699a0a0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multiget_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_paging_with_no_clustering_columns_compact // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_no_clustering_columns_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fafb57b3af0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fafb4ecf520>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fafb7196550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fafb4ecfa90>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_no_clustering_columns_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multi_count // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multi_count'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fafb57b3af0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fafadc551f0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fafb7196550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fafb5a9d760>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multi_count'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_drop_compact_storage_flag // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_drop_compact_storage_flag'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f11f56acb80>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f11f44c6a30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11f6fec550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f11f44b84c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_drop_compact_storage_flag'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_super_deletion // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_super_deletion'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f11f56acb80>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f11f5c78a30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11f6fec550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f11f459f0a0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_super_deletion'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_only_superusers_can_drop_users // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_only_superusers_can_drop_users'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9b0fa1c8b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9b0fa1c3d0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9b11140550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9b0fa15e80>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_only_superusers_can_drop_users'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_json_tools // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_json_tools'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9b0fa1c8b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9b0d6cd880>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9b11140550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9b0d607130>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_json_tools'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_reinsert // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_reinsert'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9b0fa1c8b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9b0ccc4a00>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9b11140550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9b0cc801f0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_reinsert'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_paging_for_range_name_queries_compact // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_for_range_name_queries_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8b35da9490>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8b342cf460>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8b375495e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8b342cf9d0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_for_range_name_queries_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_describe_keyspace // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe_keyspace'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8b35da9490>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8b34366040>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8b375495e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8b374f5fd0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe_keyspace'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_cql_write_compatibility // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cql_write_compatibility'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8b737ac3a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8b70490a60>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8b7519f4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8b704b87f0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cql_write_compatibility'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multi_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multi_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8b737ac3a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8b7049ba90>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8b7519f4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8b7049bf70>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multi_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_async_2 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_2'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8b737ac3a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8b704d4310>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8b7519f4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8b72e080d0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_2'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_14766 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_14766'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f3641fed820>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f3641fdd0a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f3643712670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f36403cc160>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_14766'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_describe // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f3641fed820>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f36320771c0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f3643712670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f36320778e0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_sc_with_row_cache // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_sc_with_row_cache'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9b36197a30>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9b26bf1130>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9b37b5d4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9b26bf1b50>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_sc_with_row_cache'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_describe_ring // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe_ring'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9b36197a30>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9b348f6040>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9b37b5d4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9b348f61c0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe_ring'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_functional // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_functional'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc43ee31b80>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc43f1ba460>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc4407fb550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc43f1dfe80>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_functional'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_describe_token_map // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_describe_token_map'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc43ee31b80>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc43e365430>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc4407fb550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc43e365c40>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_describe_token_map'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_describe_partitioner // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_describe_partitioner'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7213127910>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f72136dc400>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7214aef430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f72135bb850>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_describe_partitioner'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_read_old_sstables_after_upgrade // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_read_old_sstables_after_upgrade'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fddc4178d00>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fddc4294460>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fddc5b43550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fddc3672100>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_read_old_sstables_after_upgrade'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_describe_snitch // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe_snitch'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fddc4178d00>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fddc37ce9d0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fddc5b43550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fddc38d9c70>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe_snitch'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_closing_connections // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_closing_connections'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5c26664d90>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5c24209430>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5c2800b4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5c24209e80>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_closing_connections'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_invalid_ks_names // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_invalid_ks_names'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5c26664d90>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5c17323580>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5c2800b4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5c17323040>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_invalid_ks_names'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_6285 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_6285'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f769296a640>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7668b44b20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f769430e550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f76929a5a00>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_6285'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_invalid_strategy_class // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_invalid_strategy_class'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f769296a640>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7692cb8880>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f769430e550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7692cb8ee0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_invalid_strategy_class'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_populate_mv_after_insert_wide_rows // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_populate_mv_after_insert_wide_rows'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb39832d8b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb3984e0460>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb399d424c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb398376ca0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_populate_mv_after_insert_wide_rows'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_insert // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb39832d8b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb398a0a9d0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb399d424c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb3983765b0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_invalid_cf_names // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_invalid_cf_names'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb39832d8b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb397ab51c0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb399d424c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb397ab5e50>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_invalid_cf_names'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_empty_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_empty_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff66d2e38b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff66d9ce6d0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff66ecfa3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff6660bf190>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_empty_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_system_cf_recreate // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_cf_recreate'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff66d2e38b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff66d4e6310>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff66ecfa3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff66d4e66a0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_cf_recreate'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_cas // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_cas'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2f4f2227c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2f4f80fd90>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2f50bb2430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2f4d1e02e0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_cas'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_system_keyspace_operations // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_keyspace_operations'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2f4f2227c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2f4f27fbb0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2f50bb2430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2f4f27fc40>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_keyspace_operations'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_table_compact_storage // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_table_compact_storage'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd8fc5c71f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd8fc535580>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd8fd85a430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd8fc535d60>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_table_compact_storage'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_paging_with_filtering_on_clustering_columns_compact /
/ Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_filtering_on_clustering_columns_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd8fc5c71f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd8fc111f10>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd8fd85a430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd8fb1ffa30>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_filtering_on_clustering_columns_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_range_with_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_range_with_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd8fc5c71f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd8fb2355b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd8fd85a430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd8fb4ca040>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_range_with_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_truncate // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_truncate'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd8fc5c71f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd8fb23c970>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd8fd85a430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd8fb264fa0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_truncate'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_async_3 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_3'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd8fc5c71f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd8fb338ca0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd8fd85a430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd8fb34a940>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_3'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_missing_super // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_missing_super'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff5e192c640>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff5e1b08ac0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff5e32bd670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff5e1de3d00>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_missing_super'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_create_then_drop_ks // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_create_then_drop_ks'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff5e192c640>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff5e0e8bb20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff5e32bd670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff5e324d6a0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_create_then_drop_ks'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_no_anticompaction_after_dclocal_repair // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_no_anticompaction_after_dclocal_repair'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff5e192c640>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff5e106ba90>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff5e32bd670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff5e1f57c70>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_no_anticompaction_after_dclocal_repair'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_count // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_count'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fbce2bbe0a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fbce23221f0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fbce46205e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fbce22e0e50>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_count'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_column_validators // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_column_validators'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fbce2bbe0a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fbce22e6d90>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fbce46205e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fbce22e6970>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_column_validators'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_count_paging // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_count_paging'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fae037d0fa0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fae03cfd490>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fae051d7550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fae03cfd040>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_count_paging'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_system_column_family_operations // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_column_family_operations'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fae037d0fa0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fae03a14100>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fae051d7550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fae03cf5310>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_column_family_operations'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_no_anticompaction_after_hostspecific_repair // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_no_anticompaction_after_hostspecific_repair'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fae037d0fa0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fae0402c6a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fae051d7550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fae02c1adf0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_no_anticompaction_after_hostspecific_repair'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_rf_collapse_yaml_file_snitch // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_rf_collapse_yaml_file_snitch'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9a06c2ea00>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9a06ca0610>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9a08639550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9a06288910>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_rf_collapse_yaml_file_snitch'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_count_around_page_size // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_count_around_page_size'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9a06c2ea00>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9a072fafa0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9a08639550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9a06e6d3a0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_count_around_page_size'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_dynamic_indexes_creation_deletion // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_dynamic_indexes_creation_deletion'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9a06c2ea00>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9a0607a250>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9a08639550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9a0607a790>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_dynamic_indexes_creation_deletion'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_no_anticompaction_after_subrange_repair // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_no_anticompaction_after_subrange_repair'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9a06c2ea00>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9a07303490>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9a08639550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9a062e6b20>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_no_anticompaction_after_subrange_repair'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_rf_expand_yaml_file_snitch // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_rf_expand_yaml_file_snitch'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f603bb71490>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f603b276580>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f603d593550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f603b276340>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_rf_expand_yaml_file_snitch'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_insert // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_insert'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f603bb71490>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f603bde1730>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f603d593550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f603bbec7c0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_insert'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_dynamic_indexes_with_system_update_cf // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_dynamic_indexes_with_system_update_cf'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f603bb71490>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f603b1f9880>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f603d593550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f603c2629d0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_dynamic_indexes_with_system_update_cf'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_no_anticompaction_of_already_repaired // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_no_anticompaction_of_already_repaired'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f603bb71490>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f603b0226a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f603d593550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f603aeabb80>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_no_anticompaction_of_already_repaired'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_get // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_get'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f460ccb6640>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f460d307550>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f460e6ff550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f460c157640>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_get'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_system_super_column_family_operations // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_super_column_family_operations'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f460ccb6640>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f460d22a910>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f460e6ff550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f460c34d910>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_super_column_family_operations'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_subcolumn_limit // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_subcolumn_limit'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f4a451fd850>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f4a456eed30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f4a46ae3430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f4a4579d6d0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_subcolumn_limit'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_insert_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f4a451fd850>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f4a3e307550>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f4a46ae3430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f4a3e307f10>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_long_order // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_long_order'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9eebb19340>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9eeb179700>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9eed4213a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9eeb04d310>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_long_order'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_insert_max_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert_max_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9eebb19340>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9eebf44820>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9eed4213a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9eebf6a910>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert_max_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_simple_parallel_repair // Failure
AssertionError: assert 2001 == 2000 + where 2001 = len([Row(key='k488', c1='value1',
c2='value2'), Row(key='k801', c1='value1', c2='value2'), Row(key='k190',
c1='value1', c2... c1='value1', c2='value2'), Row(key='k916', c1='value1',
c2='value2'), Row(key='k1925', c1='value1', c2='value2'), ...])
self = <repair_tests.repair_test.TestRepair object at 0x7f9ee9312130>
def test_simple_parallel_repair(self):
"""
Calls simple repair test with a parallel repair
"""
> self._simple_repair(sequential=False)
repair_tests/repair_test.py:358:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
repair_tests/repair_test.py:443: in _simple_repair
self._repair_and_verify(sequential)
repair_tests/repair_test.py:126: in _repair_and_verify
self.check_rows_on_node(node3, 2000, missings=[1000])
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <repair_tests.repair_test.TestRepair object at 0x7f9ee9312130>
node_to_check = <ccmlib.node.Node object at 0x7f9ee9312f40>, rows = 2000
found = [], missings = [1000], restart = True
def check_rows_on_node(self, node_to_check, rows, found=None, missings=None,
restart=True):
"""
Function to verify the rows on a given node, without interference
from the other nodes in the cluster
@param node_to_check The given node to check. Should be the node, not the index
@param rows The number of rows we expect
@param found A list of partition keys that we expect to be on the node
@param missings A list of partition keys we expect NOT to be on the node
@param restart Whether or not we should restart the nodes we shut down to perform
the assertions. Should only be False if the call to check_rows_on_node is the last
line in the test.
"""
if found is None:
found = []
if missings is None:
missings = []
stopped_nodes = []
for node in list(self.cluster.nodes.values()):
if node.is_running() and node is not node_to_check:
stopped_nodes.append(node)
node.stop(wait_other_notice=True)
session = self.patient_exclusive_cql_connection(node_to_check, 'ks')
result = list(session.execute("SELECT * FROM cf LIMIT {}".format(rows * 2),
timeout=10))
> assert len(result) == rows
E AssertionError: assert 2001 == 2000
E + where 2001 = len([Row(key='k488', c1='value1', c2='value2'), Row(key='k801',
c1='value1', c2='value2'), Row(key='k190', c1='value1', c2... c1='value1',
c2='value2'), Row(key='k916', c1='value1', c2='value2'), Row(key='k1925',
c1='value1', c2='value2'), ...])
repair_tests/repair_test.py:77: AssertionError
------------------------------------------------------------------------------------
Cassandra dtests // test_failed_snitch_update_yaml_file_snitch // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_failed_snitch_update_yaml_file_snitch'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fa1f188b7c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fa1f0d0b610>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fa1f3192430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fa1f0d0b220>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_failed_snitch_update_yaml_file_snitch'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_integer_order // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_integer_order'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fa1f188b7c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fa1f0d54cd0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fa1f3192430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fa1f0e6e490>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_integer_order'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_insert_max_default_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_insert_max_default_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fa1f188b7c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fa1f19cbb20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fa1f3192430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fa1f19b3dc0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_insert_max_default_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_alter_table // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_alter_table'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fa1f188b7c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fa1f03a7670>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fa1f3192430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fa1f1a481c0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_alter_table'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_time_uuid // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_time_uuid'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2c286d58b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2c28ba71f0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2c2a04b3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2c287cac40>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_time_uuid'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_simple_expiration // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_simple_expiration'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2c286d58b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2c27b0b910>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2c2a04b3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2c27b0bcd0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_simple_expiration'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_mutation_v2 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_mutation_v2'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2c286d58b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2c24d7f1c0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2c2a04b3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2c28ccc190>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_mutation_v2'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_range_with_remove_cf // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_range_with_remove_cf'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f4706467e20>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f47049fff10>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f4707d063a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f47064d2040>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_range_with_remove_cf'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_cql_range_tombstone_and_static // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_cql_range_tombstone_and_static'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f4706467e20>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f47049ff9a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f4707d063a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f47049ffdf0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_cql_range_tombstone_and_static'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_range_async_1 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_1'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f4706467e20>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f4704a17e20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f4707d063a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f4704a179d0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_1'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_long_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_long_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f6f1668b280>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f6f1685e040>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f6f17ffe430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f6f16a985e0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_long_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_expiration_with_default_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_expiration_with_default_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f6f1668b280>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f6f16c85370>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f6f17ffe430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f6f16d58c10>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_expiration_with_default_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_sstableupgrade // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_sstableupgrade'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f216ee180a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f216e4a4e20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f21707924c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f216ee18b50>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_sstableupgrade'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_integer_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_integer_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f216ee180a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f216f05d670>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f21707924c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f216f3c9730>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_integer_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_expiration_with_default_ttl_and_zero_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_expiration_with_default_ttl_and_zero_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f216ee180a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f216f4513d0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f21707924c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f216f44be20>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_expiration_with_default_ttl_and_zero_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_compaction_delete[LeveledCompactionStrategy] // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_compaction_delete
[LeveledCompactionStrategy]'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fbce3c82730>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fbce038f3a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fbce561d670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fbce03a1880>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_compaction_delete
[LeveledCompactionStrategy]'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_insert // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_batch_insert'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fbce3c82730>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fbce3e80b80>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fbce561d670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fbce3ec0100>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_batch_insert'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_simple_expiration_batch_mutate // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_simple_expiration_batch_mutate'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fbce3c82730>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fbce41cb130>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fbce561d670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fbce41d1880>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_simple_expiration_batch_mutate'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_compaction_delete[SizeTieredCompactionStrategy] // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_compaction_delete
[SizeTieredCompactionStrategy]'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f1150abbb80>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f115133fb20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11524d35e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f115133f130>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_compaction_delete
[SizeTieredCompactionStrategy]'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_standard_columns // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_standard_columns'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f1150abbb80>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f11486be9a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11524d35e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f114867faf0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_standard_columns'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_update_expiring // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_update_expiring'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f1150abbb80>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f114bfbed30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11524d35e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f114bfbe070>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_update_expiring'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_compaction_delete[DateTieredCompactionStrategy] // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_compaction_delete
[DateTieredCompactionStrategy]'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fac5fc54f10>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fac5e278340>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fac61605430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fac5e308610>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_compaction_delete
[DateTieredCompactionStrategy]'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_remove_standard_columns // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_standard_columns'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fac5fc54f10>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fac5f3f4dc0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fac61605430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fac5f3f2580>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_standard_columns'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_remove_expiring // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_remove_expiring'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fac5fc54f10>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fac5e3be340>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fac61605430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fac5e320340>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_remove_expiring'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_remove_standard_row // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_standard_row'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8d11e92a00>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8d12074fd0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8d1383e550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8d125051f0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_standard_row'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_describe_ring_on_invalid_keyspace // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_describe_ring_on_invalid_keyspace'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8d11e92a00>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8d114a1d60>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8d1383e550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8d114a1b50>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_describe_ring_on_invalid_keyspace'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_remove_super_columns_with_standard_under /
/ Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_super_columns_with_standard_under'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f31203eaa60>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f311eb62d00>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f3121d915e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f311ea1c7c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_super_columns_with_standard_under'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_decr_standard_add // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_add'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f31203eaa60>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f311fae28b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f3121d915e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f311fae24c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_add'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests /
/ test_batch_mutate_remove_super_columns_with_none_given_underneath // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_super_columns_with_none_given_underneath'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc6fc4499a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc6fab57730>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc6fddf4430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc6fab5e070>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_super_columns_with_none_given_underneath'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_decr_super_add // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_super_add'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc6fc4499a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc6fb8f18b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc6fddf4430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc6fb8f1b80>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_super_add'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_remove_super_columns_entire_row // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_super_columns_entire_row'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd747e4acd0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd7246606a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd7497ef5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd7441b7460>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_super_columns_entire_row'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_standard_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_standard_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd747e4acd0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd74437e760>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd7497ef5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd74437ee20>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_standard_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_compact_storage // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_compact_storage'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7f9e2600d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7f9d6b4ca0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7f9fc1d430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7f9d6ada60>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_compact_storage'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_remove_slice_standard // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_slice_standard'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7f9e2600d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7f9e477970>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7f9fc1d430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7f9d7f84c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_slice_standard'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_super_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_incr_super_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7f9e2600d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7f9e600850>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7f9fc1d430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7f9e8f9490>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_incr_super_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_range_collation // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_range_collation'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc3014eb4c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc30147c5e0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc302d10430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc2d7e8cc10>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_range_collation'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_compact_storage_get // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_compact_storage_get'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc3014eb4c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc301362ac0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc302d10430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc30146e9a0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_compact_storage_get'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_datetimeformat_round_trip // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_datetimeformat_round_trip'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc3014eb4c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc30197e250>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc302d10430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc301a09d90>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_datetimeformat_round_trip'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_range_async_2 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_2'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc3014eb4c0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc2f9bbf850>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc302d10430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc2f9bbfbb0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_2'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_compact_storage_composite // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_compact_storage_composite'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0dcede7100>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0dce50bc40>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0dd07904c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0dcee11a00>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_compact_storage_composite'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_remove_slice_of_entire_supercolumns // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_slice_of_entire_supercolumns'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0dcede7100>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0dce481370>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0dd07904c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0dce42aeb0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_remove_slice_of_entire_supercolumns'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_decr_standard_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0dcede7100>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0dce5138b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0dd07904c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0dce513340>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_thrift // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_thrift'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0dcede7100>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0dcefa1dc0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0dd07904c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0dce54aa30>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_thrift'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_decr_super_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_super_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f1381ab7b20>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f1381d14820>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f138347a5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f13810f57f0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_super_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_insertions_and_deletions // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_insertions_and_deletions'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9e23251b80>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9e23457bb0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9e24c0a4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9e0ab757c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_insertions_and_deletions'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_decr_standard_batch_add // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_batch_add'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f9e23251b80>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f9e23357d00>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f9e24c0a4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f9e233573d0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_batch_add'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_bad_system_calls // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_bad_system_calls'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7b93bd4af0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7b900e3280>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7b9558f3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7b941ec400>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_bad_system_calls'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_decr_standard_batch_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_batch_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7b93bd4af0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7b900d6a30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7b9558f3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7b900d6fa0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_batch_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_bad_batch_calls // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_bad_batch_calls'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb91e0ae910>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb91e4ffe80>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb91f8714c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb91c326ee0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_bad_batch_calls'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_range_deletion // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_range_deletion'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb91e0ae910>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb91e093130>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb91f8714c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb91e0939d0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_range_deletion'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_wide_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_wide_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f673b9365b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f6738448f10>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f673d09c550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f673a72f280>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_wide_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_column_name_lengths // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_column_name_lengths'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f673b9365b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f673bd68040>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f673d09c550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f673bb554f0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_column_name_lengths'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_range_deletion_eoc_0 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_range_deletion_eoc_0'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f673b9365b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f6739d4fa00>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f673d09c550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f6739d4f970>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_range_deletion_eoc_0'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_13691 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_13691'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8d7bc03460>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8d7b185b80>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8d7d3e24c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8d7c0b3c10>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_13691'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_bad_calls // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_bad_calls'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8d7bc03460>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8d783ffb80>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8d7d3e24c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8d7836c310>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_bad_calls'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_decr_standard_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8d7bc03460>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8d785c45e0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8d7d3e24c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8d785c41f0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_logged_batch_compatibility_1 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_1'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb45fc559d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb45e4377f0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb4615f4550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb45fe8b430>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_1'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_insert_super // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_insert_super'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb45fc559d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb45c23fc10>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb4615f4550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb46007a730>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_insert_super'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_incr_decr_standard_multiget_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_multiget_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb45fc559d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb45fcba3d0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb4615f4550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb45fcba220>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_incr_decr_standard_multiget_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batchlog_replay_compatibility_1 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batchlog_replay_compatibility_1'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0d8cea8fa0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0d8cd9b700>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0d8e614310>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0d8cccea30>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batchlog_replay_compatibility_1'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_cf_remove_column // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_cf_remove_column'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0d8cea8fa0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0d6450b940>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0d8e614310>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0d6458b4f0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_cf_remove_column'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_counter_get_slice_range // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_counter_get_slice_range'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0d8cea8fa0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0d6468caf0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0d8e614310>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0d6468cb80>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_counter_get_slice_range'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_logged_batch_compatibility_2 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_2'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f66e0d06130>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f66e0ba0d60>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f66e247c3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f66e0c9e730>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_2'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_drop_column_compact // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_drop_column_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f66e0d06130>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f66e0ae7c40>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f66e247c3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f66e1105b20>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_drop_column_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_cf_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_cf_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f66e0d06130>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f66e0afab20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f66e247c3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f66e1143130>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_cf_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_counter_get_slice_super_range // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_counter_get_slice_super_range'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f66e0d06130>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f66e0130d30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f66e247c3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f66e1157f10>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_counter_get_slice_super_range'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_range_partial // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_range_partial'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fe0bd50a0d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fe0bdb13a00>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fe0bedad3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fe0bc2d3790>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_range_partial'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_range_tombstone_eoc_0 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_range_tombstone_eoc_0'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fe0bd50a0d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fe0bda83f10>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fe0bedad3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fe0b668e2b0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_range_tombstone_eoc_0'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_range_async_3 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_3'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fe0bd50a0d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fe0bd733700>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fe0bedad3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fe0b67c8e20>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_3'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_logged_batch_compatibility_3 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_3'>>
dtest_config = <dtest_config.DTestConfig object at 0x7faa47838d30>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7faa45dd69a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7faa48ff33a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7faa4782eca0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_3'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_alter_rf_and_run_read_repair // Failure
read_repair_test.NotRepairedException
self = <read_repair_test.TestReadRepair object at 0x7faa47c3f0d0>
@since('3.0')
def test_alter_rf_and_run_read_repair(self):
"""
@jira_ticket CASSANDRA-10655
@jira_ticket CASSANDRA-10657
Test that querying only a subset of all the columns in a row doesn't confuse read-
repair to avoid
the problem described in CASSANDRA-10655.
"""
# session is only used to setup & do schema modification. Actual data queries are
done directly on
# each node, using an exclusive connection and CL.ONE
session = self.patient_cql_connection(self.cluster.nodelist()[0])
initial_replica, non_replicas = self.do_initial_setup(session)
# Execute a query at CL.ALL on one of the nodes which was *not* the initial replica.
It should trigger a
# read repair and propagate the data to all 3 nodes.
# Note: result of the read repair contains only the selected column (a), not all
columns
logger.debug("Executing 'SELECT a...' on non-initial replica to trigger read repair
" + non_replicas[0].name)
read_repair_session = self.patient_exclusive_cql_connection(non_replicas[0])
assert_one(read_repair_session, "SELECT a FROM alter_rf_test.t1 WHERE k=1", [1],
cl=ConsistencyLevel.ALL)
# The read repair should have repaired the replicas, at least partially (see
CASSANDRA-10655)
# verify by querying each replica in turn.
value_skipping_disabled = True if self.cluster.version() < '3.4' else False
> self.check_data_on_each_replica(expect_fully_repaired=value_skipping_disabled,
initial_replica=initial_replica)
read_repair_test.py:128:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <read_repair_test.TestReadRepair object at 0x7faa47c3f0d0>
expect_fully_repaired = False
initial_replica = <ccmlib.node.Node object at 0x7faa44311ac0>
def check_data_on_each_replica(self, expect_fully_repaired, initial_replica):
"""
Perform a SELECT * query at CL.ONE on each replica in turn. If expect_fully_repaired
is True, we verify that
each replica returns the full row being queried. If not, then we only verify that
the 'a' column has been
repaired.
"""
stmt = SimpleStatement("SELECT * FROM alter_rf_test.t1 WHERE k=1",
consistency_level=ConsistencyLevel.ONE)
logger.debug("Checking all if read repair has completed on all replicas")
for n in self.cluster.nodelist():
logger.debug("Checking {n}, {x}expecting all columns"
.format(n=n.name, x="" if expect_fully_repaired or n == initial_replica else "not
"))
session = self.patient_exclusive_cql_connection(n)
res = rows_to_list(session.execute(stmt))
logger.debug("Actual result: " + str(res))
expected = [[1, 1, 1]] if expect_fully_repaired or n == initial_replica else [[1, 1,
None]]
if res != expected:
> raise NotRepairedException()
E read_repair_test.NotRepairedException
read_repair_test.py:273: NotRepairedException
------------------------------------------------------------------------------------
Cassandra dtests // test_super_cf_remove_and_range_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cf_remove_and_range_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7faa47838d30>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7faa443e1a30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7faa48ff33a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7faa44082e20>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cf_remove_and_range_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_index_scan // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_index_scan'>>
dtest_config = <dtest_config.DTestConfig object at 0x7faa47838d30>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7faa466a7850>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7faa48ff33a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7faa466a7070>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_index_scan'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_dead_coordinator // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_dead_coordinator'>>
dtest_config = <dtest_config.DTestConfig object at 0x7faa47838d30>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7faa443e4880>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7faa48ff33a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7faa466731c0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_dead_coordinator'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_logged_batch_compatibility_4 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_4'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0b06ff5f70>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0b06fdaa30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0b087af4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0b06e0efa0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_4'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_validate_empty_column_name // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_validate_empty_column_name'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0b06ff5f70>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0b0541f7c0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0b087af4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0b05431dc0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_validate_empty_column_name'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_read_repair_chance // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_read_repair_chance'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0b06ff5f70>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0aec6e99d0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0b087af4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0b060efe20>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_read_repair_chance'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_cf_remove_column // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cf_remove_column'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0b06ff5f70>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0b06f8ee50>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0b087af4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0b05561c10>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cf_remove_column'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_index_scan_uuid_names // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_index_scan_uuid_names'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f0b06ff5f70>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f0b0611fd60>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f0b087af4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f0b06329850>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_index_scan_uuid_names'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batchlog_replay_compatibility_4 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batchlog_replay_compatibility_4'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff0605ae5e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff060593c40>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff061d65430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff0607c4250>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batchlog_replay_compatibility_4'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_cf_remove_supercolumn // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cf_remove_supercolumn'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff0605ae5e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff05fa354c0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff061d65430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff05f9c53d0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cf_remove_supercolumn'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_index_scan_expiring // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_index_scan_expiring'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff0605ae5e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff0609cccd0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff061d65430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff05fabefd0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_index_scan_expiring'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_logged_batch_compatibility_5 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_5'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7c92346310>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7c908e9370>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7c93b00550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7c92329730>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_logged_batch_compatibility_5'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_compact_counter_cluster // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_compact_counter_cluster'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7c92346310>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7c90871a00>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7c93b00550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7c90804f10>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_compact_counter_cluster'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_cf_resurrect_subcolumn // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cf_resurrect_subcolumn'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7c92346310>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7c908efb20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7c93b00550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7c907e6970>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_cf_resurrect_subcolumn'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_index_scan_indexed_column_outside_slice_predicate // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_index_scan_indexed_column_outside_slice_predicate'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7c92346310>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7c90862430>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7c93b00550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7c90862070>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_index_scan_indexed_column_outside_slice_predicate'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_failure_during_anticompaction // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_failure_during_anticompaction'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f7c92346310>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f7c9088ce50>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f7c93b00550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f7c926e1850>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_failure_during_anticompaction'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_empty_range // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_empty_range'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f54d69f0c10>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f54c7bb3ee0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f54d81c44c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f54c7c3bdc0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_empty_range'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_column_not_found_quorum // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_column_not_found_quorum'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f54d69f0c10>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f54c7c3ba90>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f54d81c44c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f54c7ba8d00>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_column_not_found_quorum'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_get_slice_range // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_get_slice_range'>>
dtest_config = <dtest_config.DTestConfig object at 0x7faddc713280>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7faddcab6880>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fadde11f430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fadd90fa670>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_get_slice_range'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multi_dc_tokens_default // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_multi_dc_tokens_default'>>
dtest_config = <dtest_config.DTestConfig object at 0x7faddc713280>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7faddca3c130>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fadde11f430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7faddca3c8b0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_multi_dc_tokens_default'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_deprecated_repair_error_notification // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_deprecated_repair_error_notification'>>
dtest_config = <dtest_config.DTestConfig object at 0x7faddc713280>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fadd925ba30>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fadde11f430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fadd92806d0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_deprecated_repair_error_notification'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_atomic_writes[blocking] // Failure
assert [[1, 0, 2, 2]] == [[1, 0, 2, 1]] At index 0 diff: [1, 0, 2, 2] != [1, 0, 2,
1] Full diff: - [[1, 0, 2, 2]] ? ^ + [[1, 0, 2, 1]] ? ^
self = <read_repair_test.TestReadRepairGuarantees object at 0x7f6063593520>
repair_type = 'blocking', expect_atomic = False
@since('4.0')
@pytest.mark.parametrize("repair_type,expect_atomic",
(('blocking', False), ('none', True)),
ids=('blocking', 'none'))
def test_atomic_writes(self, repair_type, expect_atomic):
"""
tests how read repair provides, or breaks, write atomicity
'none' read repair should maintain atomic writes, blocking and async should not
"""
assert repair_type in ('blocking', 'async', 'none')
node1, node2, node3 = self.cluster.nodelist()
session = self.get_cql_connection(node1, timeout=2)
ddl = "CREATE TABLE ks.tbl (k int, c int, v1 int, v2 int, primary key (k, c)) WITH
read_repair = '" + repair_type + "';"
print (ddl)
session.execute(ddl)
session.execute(quorum("INSERT INTO ks.tbl (k, c, v1, v2) VALUES (1, 0, 1, 1)"))
with stop_writes(node2, node3):
session.execute("INSERT INTO ks.tbl (k, c, v1, v2) VALUES (1, 0, 2, 2)")
with stop_reads(node3), stop_writes(node3):
results = session.execute(quorum("SELECT v1 FROM ks.tbl WHERE k=1"))
assert listify(results) == [[2]]
# make sure async read repair has a chance to write the repair value
if repair_type == 'async':
time.sleep(1)
session = self.get_cql_connection(node3, timeout=2)
with stop_reads(node1):
results = session.execute(quorum("SELECT * FROM ks.tbl WHERE k=1"))
if expect_atomic:
assert listify(results) == [kcvv(1, 0, 1, 1)]
else:
> assert listify(results) == [kcvv(1, 0, 2, 1)]
E assert [[1, 0, 2, 2]] == [[1, 0, 2, 1]]
E At index 0 diff: [1, 0, 2, 2] != [1, 0, 2, 1]
E Full diff:
E - [[1, 0, 2, 2]]
E ? ^
E + [[1, 0, 2, 1]]
E ? ^
read_repair_test.py:832: AssertionError
------------------------------------------------------------------------------------
Cassandra dtests // test_get_slice_super_range // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_slice_super_range'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f6063e49340>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f6063189100>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f6065805430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f606328c8b0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_slice_super_range'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multi_dc_tokens_murmur3 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_multi_dc_tokens_murmur3'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f6063e49340>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f6064191310>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f6065805430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f6064191850>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_multi_dc_tokens_murmur3'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests /
/ test_paging_with_filtering_on_partition_key_on_counter_columns_compact // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_filtering_on_partition_key_on_counter_columns_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff0a57bd370>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff0a57af910>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff0a7177550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff0a46daca0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_filtering_on_partition_key_on_counter_columns_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_get_range_slices_tokens // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_range_slices_tokens'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff0a57bd370>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff0a4effca0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff0a7177550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff0a4ecc3a0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_get_range_slices_tokens'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multi_dc_tokens_random // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_multi_dc_tokens_random'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff0a57bd370>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff0a46ac970>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff0a7177550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff0a46ac730>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_multi_dc_tokens_random'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multiget_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multiget_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2f3775dd90>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2f35ba86d0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2f38f9f3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2f35b08160>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multiget_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multi_partition_consistent_reads_after_write // Failure
Failed: Timeout >900.0s
self = <materialized_views_test.TestMaterializedViewsConsistency object at
0x7ff2ea69ef70>
def test_multi_partition_consistent_reads_after_write(self):
"""
Tests consistency of multiple writes to a multiple partitions
@jira_ticket CASSANDRA-10981
"""
> self._consistent_reads_after_write_test(5)
materialized_views_test.py:2775:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <materialized_views_test.TestMaterializedViewsConsistency object at
0x7ff2ea69ef70>
num_partitions = 5
def _consistent_reads_after_write_test(self, num_partitions):
session = self.prepare()
node1, node2, node3 = self.cluster.nodelist()
# Test config
lower = 0
upper = 100000
processes = 4
queues = [None] * processes
eachProcess = (upper - lower) // processes
logger.debug("Creating schema")
session.execute(
("CREATE KEYSPACE IF NOT EXISTS mvtest WITH replication = "
"{'class': 'SimpleStrategy', 'replication_factor': '3'}")
)
session.execute(
"CREATE TABLE mvtest.test1 (a int, b int, c int, d int, PRIMARY KEY (a,b))"
)
session.cluster.control_connection.wait_for_schema_agreement()
insert1 = session.prepare("INSERT INTO mvtest.test1 (a,b,c,d) VALUES (?,?,?,?)")
insert1.consistency_level = writeConsistency
logger.debug("Writing data to base table")
for i in range(upper // 10):
self._do_row(insert1, i, num_partitions)
logger.debug("Creating materialized view")
session.execute(
('CREATE MATERIALIZED VIEW mvtest.mv1 AS '
'SELECT a,b,c,d FROM mvtest.test1 WHERE a IS NOT NULL AND b IS NOT NULL AND '
'c IS NOT NULL PRIMARY KEY (c,a,b)')
)
session.cluster.control_connection.wait_for_schema_agreement()
logger.debug("Writing more data to base table")
for i in range(upper // 10, upper):
self._do_row(insert1, i, num_partitions)
# Wait that all requests are done
while self.num_request_done < upper:
> time.sleep(1)
E Failed: Timeout >900.0s
materialized_views_test.py:2820: Failed
------------------------------------------------------------------------------------
Cassandra dtests // test_read_old_sstables_after_upgrade // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_read_old_sstables_after_upgrade'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff2eb2377f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff2eb2d22b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff2ec9cd3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff2eb6aa7c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_read_old_sstables_after_upgrade'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_describe_snitch // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe_snitch'>>
dtest_config = <dtest_config.DTestConfig object at 0x7ff2eb2377f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7ff2e86f15e0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7ff2ec9cd3a0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7ff2eb00dcd0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_describe_snitch'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_paging_with_no_clustering_columns_compact // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_no_clustering_columns_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2e7a987a30>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2e7af84130>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2e7c1294c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2e7a89c910>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_with_no_clustering_columns_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_closing_connections // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_closing_connections'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2e7a987a30>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2e7a7d0190>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2e7c1294c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2e6b41b040>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_closing_connections'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_invalid_ks_names // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_invalid_ks_names'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2e7a987a30>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2e7ad8a9a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2e7c1294c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2e786cb3a0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_invalid_ks_names'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_only_superuser_can_create_users // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_only_superuser_can_create_users'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f24bbfdd2e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f24bbfdd340>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f24bd970430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f24bbfdda90>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_only_superuser_can_create_users'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_6285 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_6285'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f24bbfdd2e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f24bb781dc0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f24bd970430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f24b8171d30>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_6285'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_invalid_strategy_class // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_invalid_strategy_class'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f24bbfdd2e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f24bc5dbf70>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f24bd970430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f24bc5db1c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_invalid_strategy_class'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_password_authenticator_create_user_requires_password /
/ Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_password_authenticator_create_user_requires_password'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8519c44b50>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8519c44b20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f851b57c5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8519c447f0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_password_authenticator_create_user_requires_password'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_drop_compact_storage_flag // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_drop_compact_storage_flag'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8519c44b50>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8519d81160>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f851b57c5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f85182fa1c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_drop_compact_storage_flag'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_json_tools // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_json_tools'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8519c44b50>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8519373c40>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f851b57c5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8519373d30>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_json_tools'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_insert // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8519c44b50>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8519e8d6a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f851b57c5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8519e8d2b0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_invalid_cf_names // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_invalid_cf_names'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8519c44b50>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8519382220>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f851b57c5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8519382760>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_invalid_cf_names'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_paging_for_range_name_queries_compact // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_for_range_name_queries_compact'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5fe0474190>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5fdd21a910>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5fe1dbb4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5fdd21a610>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_paging_for_range_name_queries_compact'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_empty_slice // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_empty_slice'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5fe0474190>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5fe0a071c0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5fe1dbb4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5fddadba60>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_empty_slice'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_system_cf_recreate // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_cf_recreate'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5fe0474190>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5fe0471d90>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5fe1dbb4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5fe0471a90>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_cf_recreate'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_14766 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_14766'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd806d59970>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd806319a60>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd80866b550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd806493220>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_14766'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_cas // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_cas'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd806d59970>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd8074f04f0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd80866b550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd8063b5310>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_cas'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_system_keyspace_operations // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_keyspace_operations'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd806d59970>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd806f3b5e0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd80866b550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd806f3b1f0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_keyspace_operations'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_remove_column_ttl_with_default_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_remove_column_ttl_with_default_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd806d59970>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd8063ef4c0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd80866b550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd8063efd60>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_remove_column_ttl_with_default_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_async_1 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_1'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd806d59970>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd8064b58e0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd80866b550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd8072acf70>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_1'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_missing_super // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_missing_super'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fcf5c0a2520>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fcf5b20ca00>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fcf5d9c24c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fcf58683520>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_missing_super'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_create_then_drop_ks // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_create_then_drop_ks'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fcf5c0a2520>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fcf5c1d2c10>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fcf5d9c24c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fcf5c1d2940>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_create_then_drop_ks'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_async_2 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_2'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fcf5c0a2520>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fcf5c3a3280>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fcf5d9c24c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fcf5c381070>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_2'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_count // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_count'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc5522ed9d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc543750ee0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc553a26670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc543750250>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_count'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_column_validators // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_column_validators'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc5522ed9d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc5539e8460>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc553a26670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc5539e80a0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_column_validators'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_async_3 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_3'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fc5522ed9d0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fc5526fe0d0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fc553a26670>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fc5520ba0a0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_async_3'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_only_superusers_can_drop_users // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_only_superusers_can_drop_users'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8b39723ca0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8b39686f10>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8b3af6e4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8b399404c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_only_superusers_can_drop_users'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_count_paging // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_count_paging'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8b39723ca0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8b39c43940>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8b3af6e4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8b39be7970>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_count_paging'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_system_column_family_operations // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_column_family_operations'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8b39723ca0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8b397a9d90>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8b3af6e4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8b397a9370>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_column_family_operations'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_range_async_1 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_1'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8b39723ca0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8b396825b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8b3af6e4c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8b39682b20>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_1'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_rf_collapse_yaml_file_snitch // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_rf_collapse_yaml_file_snitch'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f11b3f71a60>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f11b423b6a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11b55b2430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f11b1284e50>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_rf_collapse_yaml_file_snitch'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_count_around_page_size // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_count_around_page_size'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f11b3f71a60>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f11b13185b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11b55b2430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f11b3da1580>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_count_around_page_size'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_dynamic_indexes_creation_deletion // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_dynamic_indexes_creation_deletion'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f11b3f71a60>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f11b3e52520>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11b55b2430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f11b3cb1460>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_dynamic_indexes_creation_deletion'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_datetimeformat_round_trip // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_datetimeformat_round_trip'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f11b3f71a60>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f11b3169e20>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11b55b2430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f11b3132160>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_datetimeformat_round_trip'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_range_async_2 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_2'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f11b3f71a60>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f11b33339a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f11b55b2430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f11b3333df0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_2'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_multi_count // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multi_count'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2a1ee01340>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2a1e1f1160>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2a20652550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2a1d33de80>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_multi_count'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_failure_during_anticompaction // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_failure_during_anticompaction'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f2a1ee01340>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f2a1c231910>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f2a20652550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f2a1c1b33a0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_failure_during_anticompaction'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_rf_expand_yaml_file_snitch // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_rf_expand_yaml_file_snitch'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5218d09df0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5213c1c490>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f521a5ab5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5213c1c0d0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_rf_expand_yaml_file_snitch'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_insert // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_insert'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5218d09df0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5218d71220>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f521a5ab5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5219272b20>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_insert'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_dynamic_indexes_with_system_update_cf // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_dynamic_indexes_with_system_update_cf'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5218d09df0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f521921e5b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f521a5ab5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5218d6aa00>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_dynamic_indexes_with_system_update_cf'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_force_repair_range_async_3 // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_3'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5218d09df0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f52182ad2b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f521a5ab5e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f521827d610>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_force_repair_range_async_3'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_get // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_get'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f45db4ad5e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f45db7962e0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f45dcb29430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f45d8800640>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_super_get'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_system_super_column_family_operations // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_super_column_family_operations'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f45db4ad5e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f45db4dc7c0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f45dcb29430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f45db4dca60>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_system_super_column_family_operations'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_deprecated_repair_error_notification // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_deprecated_repair_error_notification'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f45db4ad5e0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f45c3c0e910>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f45dcb29430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f45c3c0e460>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_deprecated_repair_error_notification'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_populate_mv_after_insert_wide_rows // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_populate_mv_after_insert_wide_rows'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd3921668b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd392671940>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd393a065e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd3916ca1f0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_populate_mv_after_insert_wide_rows'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_super_subcolumn_limit // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_subcolumn_limit'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd3921668b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd3921ad430>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd393a065e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd39220c280>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_super_subcolumn_limit'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_insert_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fd3921668b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fd39280b8b0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fd393a065e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fd3921f7bb0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_long_order // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_long_order'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8aef2094f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8aef204f40>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8af0a56430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8aec73a7c0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_long_order'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_insert_max_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert_max_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f8aef2094f0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f8aef6da0a0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f8af0a56430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f8aef6dab80>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_insert_max_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_failed_snitch_update_yaml_file_snitch // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_failed_snitch_update_yaml_file_snitch'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f142344f2b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f140ab6f400>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f1424c9d430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f1422905b20>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_failed_snitch_update_yaml_file_snitch'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_integer_order // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_integer_order'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f142344f2b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f1423925be0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f1424c9d430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f1422888af0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_integer_order'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_insert_max_default_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_insert_max_default_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f142344f2b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f140ab67e80>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f1424c9d430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f140ab67af0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_insert_max_default_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_datetime_values // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_datetime_values'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f142344f2b0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f140ac2b970>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f1424c9d430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f140ac2b4f0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_datetime_values'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_time_uuid // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_time_uuid'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fa613994460>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fa613825f40>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fa6151944c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fa610eccb80>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_time_uuid'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_simple_expiration // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_simple_expiration'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fa613994460>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fa613d24df0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fa6151944c0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fa613c01d90>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_simple_expiration'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_long_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_long_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb8f739ef40>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb8f71e7e50>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb8f8bb2550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb8f46cd460>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_long_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_expiration_with_default_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_expiration_with_default_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fb8f739ef40>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fb8f7a7b7c0>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fb8f8bb2550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fb8f7a7bdf0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_expiration_with_default_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_integer_remove // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_integer_remove'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fe142974190>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fe128da2b80>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fe14436a430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fe1410fde50>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_integer_remove'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_expiration_with_default_ttl_and_zero_ttl // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_expiration_with_default_ttl_and_zero_ttl'>>
dtest_config = <dtest_config.DTestConfig object at 0x7fe142974190>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7fe12a740760>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fe14436a430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7fe12a7401c0>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_expiration_with_default_ttl_and_zero_ttl'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_insert // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_batch_insert'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5aeb8503a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5aeb610250>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5aecfc25e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5aeb76a3a0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_batch_insert'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_simple_expiration_batch_mutate // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_simple_expiration_batch_mutate'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f5aeb8503a0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f5ae8535490>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f5aecfc25e0>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7f5ae8535760>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_simple_expiration_batch_mutate'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_standard_columns // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_standard_columns'>>
dtest_config = <dtest_config.DTestConfig object at 0x7facff9def10>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7facfdf42490>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fad01191430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7facfef27160>
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_standard_columns'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_update_expiring // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_update_expiring'>>
dtest_config = <dtest_config.DTestConfig object at 0x7facff9def10>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7facfef32760>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7fad01191430>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.allow_log_errors:
errors = check_logs_for_errors(dtest_setup)
if len(errors) > 0:
failed = True
pytest.fail(msg='Unexpected error found in node logs (see stdout for full details).
Errors: [{errors}]'
.format(errors=str.join(", ", errors)), pytrace=False)
finally:
try:
# save the logs for inspection
if failed or not dtest_config.delete_logs:
copy_logs(request, dtest_setup.cluster)
except Exception as e:
logger.error("Error saving log:", str(e))
finally:
> dtest_setup.cleanup_cluster(request)
conftest.py:349:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <dtest_setup.DTestSetup object at 0x7facfeca7dc0>
request = <SubRequest 'fixture_dtest_setup' for <Function 'test_update_expiring'>>
def cleanup_cluster(self, request=None):
with log_filter('cassandra'): # quiet noise from driver when nodes start going down
> if self.dtest_config.keep_test_dir or (self.dtest_config.keep_failed_test_dir and
request and request.node.rep_call.failed):
E AttributeError: 'Function' object has no attribute 'rep_call'
dtest_setup.py:351: AttributeError
------------------------------------------------------------------------------------
Cassandra dtests // test_batch_mutate_super_deletion // Error
test teardown failure
request = <SubRequest 'fixture_dtest_setup' for <Function
'test_batch_mutate_super_deletion'>>
dtest_config = <dtest_config.DTestConfig object at 0x7f451dec7be0>
fixture_dtest_setup_overrides = <dtest_setup_overrides.DTestSetupOverrides object at
0x7f451c3d4670>
fixture_logging_setup = None, fixture_dtest_cluster_name = 'test'
fixture_dtest_create_cluster_func = <function DTestSetup.create_ccm_cluster at
0x7f451f833550>
@pytest.fixture(scope='function', autouse=False)
def fixture_dtest_setup(request,
dtest_config,
fixture_dtest_setup_overrides,
fixture_logging_setup,
fixture_dtest_cluster_name,
fixture_dtest_create_cluster_func):
if running_in_docker():
cleanup_docker_environment_before_test_execution()
# do all of our setup operations to get the enviornment ready for the actual test
# to run (e.g. bring up a cluster with the necessary config, populate variables,
etc)
initial_environment = copy.deepcopy(os.environ)
dtest_setup = DTestSetup(dtest_config=dtest_config,
setup_overrides=fixture_dtest_setup_overrides,
cluster_name=fixture_dtest_cluster_name)
dtest_setup.initialize_cluster(fixture_dtest_create_cluster_func)
if not dtest_config.disable_active_log_watching:
dtest_setup.begin_active_log_watch()
# at this point we're done with our setup operations in this fixture
# yield to allow the actual test to run
yield dtest_setup
# phew! we're back after executing the test, now we need to do
# all of our teardown and cleanup operations
reset_environment_vars(initial_environment)
dtest_setup.jvm_args = []
for con in dtest_setup.connections:
con.cluster.shutdown()
dtest_setup.connections = []
failed = False
try:
if not dtest_setup.a