You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@qpid.apache.org by Rob Wiskow <rw...@genevatrading.com> on 2022/02/18 16:28:27 UTC
AMQP 1.0 support in Qpid Messaging C++ 1.39.0
I'm attempting to write a small program using AMQP via the Qpid Messaging C++ API. I downloaded and built the 1.39.0 library, and got my program to compile.
I'm specifying the "{protocol:amqp1.0}" connection option. However when I try to run the program, I get an exception:
terminate called after throwing an instance of 'qpid::messaging::MessagingException'
what(): Unsupported protocol: amqp1.0 (valid values are amqp0-10)
After a lot of searching, all I've found is one old thread, which talks about setting QPID_LOAD_MODULE to "amqpc.so", which is a file that doesn't seem to exist. https://lists.apache.org/thread/t5c2dxb22ftwy57dhjyr5jwtym0q7kob
If I try to set that environment variable to libqpid-proton-cpp.so, which I built from the Qpid Proton 0.36.0 library, it errors out claiming it can't load the file:
terminate called after throwing an instance of 'qpid::Exception'
what(): /.../qpid-proton-0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-cpp.so.12.10.0.so: cannot open shared object file: No such file or directory: /.../qpid-proton-0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-cpp.so.12.10.0.so (/.../qpid-cpp-1.39.0/src/qpid/sys/posix/Shlib.cpp:35)
If I set it to any other .so, it just goes back to complaining about the unsupported protocol.
Can anyone give me some help in this?
Thanks,
Rob.
This e-mail message (together with any attached documents) is strictly confidential and intended solely for the addressee (including the addressee's employing organization, assigns and affiliates). It may contain information that is proprietary to Geneva Trading USA LLC, its affiliates and assigns. It is controlled by law, or is covered by legal, professional or other privilege. If you are not the intended addressee nor associated with the intended addressee's organization, you must not use, disclose or copy this transmission, and are asked to notify the sender of its receipt. Please be further advised that the unauthorized interception or retrieval of e-mail may be a criminal violation of the Electronic Communications Privacy Act.
Re: AMQP 1.0 support in Qpid Messaging C++ 1.39.0
Posted by Robbie Gemmell <ro...@gmail.com>.
On Mon, 21 Feb 2022 at 17:08, Andrew Stitcher <as...@redhat.com> wrote:
>
> On Fri, 2022-02-18 at 19:25 +0000, Rob Wiskow wrote:
> > Ok, that led me in the right direction. Turns out cmake wasn't able
> > to find the qpid-proton library. I was able to fix it by pointing
> > cmake directly to where it was. Seems like maybe it should be a
> > required library.
>
> Feel free to submit a PR!
>
> The reason that the Qpid Proton library is optional is historical: AMQP
> 1.0 support is a relative latecomer to the Qpid project and initially
> only AMQP 0-10 was required. This situation has remained because the
> Qpid project (as opposed to Qpid Proton) is very lightly maintained
> currently).
>
> Andrew
>
s/project/CPP/
I believe Qpid CPP also still defaults to trying to establish a 0-10
connection first (unless told otherwise with the protocol config
option used here) for historical compatibility, before retrying with
1.0 if the server indicates it cant do 0-10 but can do 1.0 [and the
client support was built], so thats probably another reason it
remained optional since it kind of is.
> >
> > -----Original Message-----
> > From: Andrew Stitcher <as...@redhat.com>
> > Sent: Friday, February 18, 2022 11:53 AM
> > To: users@qpid.apache.org
> > Subject: Re: AMQP 1.0 support in Qpid Messaging C++ 1.39.0
> >
> > I don't have time for a full reply, but it looks like you didn't
> > build qpid 1.39 with the qpid-proton library.
> >
> > The Proton library is what handles AMQP 1.0 so qpid needs to be able
> > to find it when it is built.
> >
> > When built with Proton, qpid will create the modules for amqp 1.0 and
> > you should be able to get them to load (if you do a default install
> > everything should be a place where that automatically happens)
> >
> > HTH
> >
> > Andrew
> >
> > On Fri, 2022-02-18 at 16:28 +0000, Rob Wiskow wrote:
> > > I'm attempting to write a small program using AMQP via the Qpid
> > > Messaging C++ API. I downloaded and built the 1.39.0 library, and
> > > got
> > > my program to compile.
> > > I'm specifying the "{protocol:amqp1.0}" connection option. However
> > > when I try to run the program, I get an exception:
> > > terminate called after throwing an instance of
> > > 'qpid::messaging::MessagingException'
> > > what(): Unsupported protocol: amqp1.0 (valid values are amqp0-
> > > 10)
> > >
> > > After a lot of searching, all I've found is one old thread, which
> > > talks about setting QPID_LOAD_MODULE to "amqpc.so", which is a file
> > > that doesn't seem to exist.
> > > https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.apache.org_
> > > thread_t5c2dxb22ftwy57dhjyr5jwtym0q7kob&d=DwIDaQ&c=u4prgGy6AhZ9kpd8
> > > CpB
> > > _THof_5a8-Rz0QxAUK3K7xW8&r=rJpqg5ZNA7pmKih-mRFJVtOoVA8ieZR3-ikoPEL-
> > > H90
> > > &m=I2UELXlnt5cpLwMdARKqNqLzevJLor2UAAQif--
> > > 6xcqoYUDAfQs_2CA6UGLKymUM&s=
> > > 3x0gDbn98nln_HTLP2KYrAAl5dxTV4V8oqskuEjISck&e=
> > > If I try to set that environment variable to libqpid-proton-cpp.so,
> > > which I built from the Qpid Proton 0.36.0 library, it errors out
> > > claiming it can't load the file:
> > > terminate called after throwing an instance of 'qpid::Exception'
> > > what(): /.../qpid-proton-
> > > 0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-
> > > cpp.so.12.10.0.so: cannot open shared object file: No such file or
> > > directory: /.../qpid-proton-
> > > 0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-
> > > cpp.so.12.10.0.so (/.../qpid-cpp-
> > > 1.39.0/src/qpid/sys/posix/Shlib.cpp:35)
> > > If I set it to any other .so, it just goes back to complaining
> > > about
> > > the unsupported protocol.
> > >
> > > Can anyone give me some help in this?
> > > Thanks,
> > > Rob.
> > > This e-mail message (together with any attached documents) is
> > > strictly
> > > confidential and intended solely for the addressee (including the
> > > addressee's employing organization, assigns and affiliates). It may
> > > contain information that is proprietary to Geneva Trading USA LLC,
> > > its
> > > affiliates and assigns. It is controlled by law, or is covered by
> > > legal, professional or other privilege. If you are not the intended
> > > addressee nor associated with the intended addressee's
> > > organization,
> > > you must not use, disclose or copy this transmission, and are asked
> > > to
> > > notify the sender of its receipt.
> > > Please be further advised that the unauthorized interception or
> > > retrieval of e-mail may be a criminal violation of the Electronic
> > > Communications Privacy Act.
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org For
> > additional commands, e-mail: users-help@qpid.apache.org
> >
> > This e-mail message (together with any attached documents) is
> > strictly confidential and intended solely for the addressee
> > (including the addressee's employing organization, assigns and
> > affiliates). It may contain information that is proprietary to Geneva
> > Trading USA LLC, its affiliates and assigns. It is controlled by law,
> > or is covered by legal, professional or other privilege. If you are
> > not the intended addressee nor associated with the intended
> > addressee’s organization, you must not use, disclose or copy this
> > transmission, and are asked to notify the sender of its receipt.
> > Please be further advised that the unauthorized interception or
> > retrieval of e-mail may be a criminal violation of the Electronic
> > Communications Privacy Act.
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> > For additional commands, e-mail: users-help@qpid.apache.org
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
Re: AMQP 1.0 support in Qpid Messaging C++ 1.39.0
Posted by Andrew Stitcher <as...@redhat.com>.
On Fri, 2022-02-18 at 19:25 +0000, Rob Wiskow wrote:
> Ok, that led me in the right direction. Turns out cmake wasn't able
> to find the qpid-proton library. I was able to fix it by pointing
> cmake directly to where it was. Seems like maybe it should be a
> required library.
Feel free to submit a PR!
The reason that the Qpid Proton library is optional is historical: AMQP
1.0 support is a relative latecomer to the Qpid project and initially
only AMQP 0-10 was required. This situation has remained because the
Qpid project (as opposed to Qpid Proton) is very lightly maintained
currently).
Andrew
>
> -----Original Message-----
> From: Andrew Stitcher <as...@redhat.com>
> Sent: Friday, February 18, 2022 11:53 AM
> To: users@qpid.apache.org
> Subject: Re: AMQP 1.0 support in Qpid Messaging C++ 1.39.0
>
> I don't have time for a full reply, but it looks like you didn't
> build qpid 1.39 with the qpid-proton library.
>
> The Proton library is what handles AMQP 1.0 so qpid needs to be able
> to find it when it is built.
>
> When built with Proton, qpid will create the modules for amqp 1.0 and
> you should be able to get them to load (if you do a default install
> everything should be a place where that automatically happens)
>
> HTH
>
> Andrew
>
> On Fri, 2022-02-18 at 16:28 +0000, Rob Wiskow wrote:
> > I'm attempting to write a small program using AMQP via the Qpid
> > Messaging C++ API. I downloaded and built the 1.39.0 library, and
> > got
> > my program to compile.
> > I'm specifying the "{protocol:amqp1.0}" connection option. However
> > when I try to run the program, I get an exception:
> > terminate called after throwing an instance of
> > 'qpid::messaging::MessagingException'
> > what(): Unsupported protocol: amqp1.0 (valid values are amqp0-
> > 10)
> >
> > After a lot of searching, all I've found is one old thread, which
> > talks about setting QPID_LOAD_MODULE to "amqpc.so", which is a file
> > that doesn't seem to exist.
> > https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.apache.org_
> > thread_t5c2dxb22ftwy57dhjyr5jwtym0q7kob&d=DwIDaQ&c=u4prgGy6AhZ9kpd8
> > CpB
> > _THof_5a8-Rz0QxAUK3K7xW8&r=rJpqg5ZNA7pmKih-mRFJVtOoVA8ieZR3-ikoPEL-
> > H90
> > &m=I2UELXlnt5cpLwMdARKqNqLzevJLor2UAAQif--
> > 6xcqoYUDAfQs_2CA6UGLKymUM&s=
> > 3x0gDbn98nln_HTLP2KYrAAl5dxTV4V8oqskuEjISck&e=
> > If I try to set that environment variable to libqpid-proton-cpp.so,
> > which I built from the Qpid Proton 0.36.0 library, it errors out
> > claiming it can't load the file:
> > terminate called after throwing an instance of 'qpid::Exception'
> > what(): /.../qpid-proton-
> > 0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-
> > cpp.so.12.10.0.so: cannot open shared object file: No such file or
> > directory: /.../qpid-proton-
> > 0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-
> > cpp.so.12.10.0.so (/.../qpid-cpp-
> > 1.39.0/src/qpid/sys/posix/Shlib.cpp:35)
> > If I set it to any other .so, it just goes back to complaining
> > about
> > the unsupported protocol.
> >
> > Can anyone give me some help in this?
> > Thanks,
> > Rob.
> > This e-mail message (together with any attached documents) is
> > strictly
> > confidential and intended solely for the addressee (including the
> > addressee's employing organization, assigns and affiliates). It may
> > contain information that is proprietary to Geneva Trading USA LLC,
> > its
> > affiliates and assigns. It is controlled by law, or is covered by
> > legal, professional or other privilege. If you are not the intended
> > addressee nor associated with the intended addressee's
> > organization,
> > you must not use, disclose or copy this transmission, and are asked
> > to
> > notify the sender of its receipt.
> > Please be further advised that the unauthorized interception or
> > retrieval of e-mail may be a criminal violation of the Electronic
> > Communications Privacy Act.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org For
> additional commands, e-mail: users-help@qpid.apache.org
>
> This e-mail message (together with any attached documents) is
> strictly confidential and intended solely for the addressee
> (including the addressee's employing organization, assigns and
> affiliates). It may contain information that is proprietary to Geneva
> Trading USA LLC, its affiliates and assigns. It is controlled by law,
> or is covered by legal, professional or other privilege. If you are
> not the intended addressee nor associated with the intended
> addressee’s organization, you must not use, disclose or copy this
> transmission, and are asked to notify the sender of its receipt.
> Please be further advised that the unauthorized interception or
> retrieval of e-mail may be a criminal violation of the Electronic
> Communications Privacy Act.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
> For additional commands, e-mail: users-help@qpid.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org
RE: AMQP 1.0 support in Qpid Messaging C++ 1.39.0
Posted by Rob Wiskow <rw...@genevatrading.com>.
Ok, that led me in the right direction. Turns out cmake wasn't able to find the qpid-proton library. I was able to fix it by pointing cmake directly to where it was. Seems like maybe it should be a required library.
-----Original Message-----
From: Andrew Stitcher <as...@redhat.com>
Sent: Friday, February 18, 2022 11:53 AM
To: users@qpid.apache.org
Subject: Re: AMQP 1.0 support in Qpid Messaging C++ 1.39.0
I don't have time for a full reply, but it looks like you didn't build qpid 1.39 with the qpid-proton library.
The Proton library is what handles AMQP 1.0 so qpid needs to be able to find it when it is built.
When built with Proton, qpid will create the modules for amqp 1.0 and you should be able to get them to load (if you do a default install everything should be a place where that automatically happens)
HTH
Andrew
On Fri, 2022-02-18 at 16:28 +0000, Rob Wiskow wrote:
> I'm attempting to write a small program using AMQP via the Qpid
> Messaging C++ API. I downloaded and built the 1.39.0 library, and got
> my program to compile.
> I'm specifying the "{protocol:amqp1.0}" connection option. However
> when I try to run the program, I get an exception:
> terminate called after throwing an instance of
> 'qpid::messaging::MessagingException'
> what(): Unsupported protocol: amqp1.0 (valid values are amqp0-10)
>
> After a lot of searching, all I've found is one old thread, which
> talks about setting QPID_LOAD_MODULE to "amqpc.so", which is a file
> that doesn't seem to exist.
> https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.apache.org_
> thread_t5c2dxb22ftwy57dhjyr5jwtym0q7kob&d=DwIDaQ&c=u4prgGy6AhZ9kpd8CpB
> _THof_5a8-Rz0QxAUK3K7xW8&r=rJpqg5ZNA7pmKih-mRFJVtOoVA8ieZR3-ikoPEL-H90
> &m=I2UELXlnt5cpLwMdARKqNqLzevJLor2UAAQif--6xcqoYUDAfQs_2CA6UGLKymUM&s=
> 3x0gDbn98nln_HTLP2KYrAAl5dxTV4V8oqskuEjISck&e=
> If I try to set that environment variable to libqpid-proton-cpp.so,
> which I built from the Qpid Proton 0.36.0 library, it errors out
> claiming it can't load the file:
> terminate called after throwing an instance of 'qpid::Exception'
> what(): /.../qpid-proton-
> 0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-
> cpp.so.12.10.0.so: cannot open shared object file: No such file or
> directory: /.../qpid-proton-
> 0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-
> cpp.so.12.10.0.so (/.../qpid-cpp-
> 1.39.0/src/qpid/sys/posix/Shlib.cpp:35)
> If I set it to any other .so, it just goes back to complaining about
> the unsupported protocol.
>
> Can anyone give me some help in this?
> Thanks,
> Rob.
> This e-mail message (together with any attached documents) is strictly
> confidential and intended solely for the addressee (including the
> addressee's employing organization, assigns and affiliates). It may
> contain information that is proprietary to Geneva Trading USA LLC, its
> affiliates and assigns. It is controlled by law, or is covered by
> legal, professional or other privilege. If you are not the intended
> addressee nor associated with the intended addressee's organization,
> you must not use, disclose or copy this transmission, and are asked to
> notify the sender of its receipt.
> Please be further advised that the unauthorized interception or
> retrieval of e-mail may be a criminal violation of the Electronic
> Communications Privacy Act.
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org For additional commands, e-mail: users-help@qpid.apache.org
This e-mail message (together with any attached documents) is strictly confidential and intended solely for the addressee (including the addressee's employing organization, assigns and affiliates). It may contain information that is proprietary to Geneva Trading USA LLC, its affiliates and assigns. It is controlled by law, or is covered by legal, professional or other privilege. If you are not the intended addressee nor associated with the intended addressee’s organization, you must not use, disclose or copy this transmission, and are asked to notify the sender of its receipt. Please be further advised that the unauthorized interception or retrieval of e-mail may be a criminal violation of the Electronic Communications Privacy Act.
Re: AMQP 1.0 support in Qpid Messaging C++ 1.39.0
Posted by Andrew Stitcher <as...@redhat.com>.
I don't have time for a full reply, but it looks like you didn't build
qpid 1.39 with the qpid-proton library.
The Proton library is what handles AMQP 1.0 so qpid needs to be able to
find it when it is built.
When built with Proton, qpid will create the modules for amqp 1.0 and
you should be able to get them to load (if you do a default install
everything should be a place where that automatically happens)
HTH
Andrew
On Fri, 2022-02-18 at 16:28 +0000, Rob Wiskow wrote:
> I'm attempting to write a small program using AMQP via the Qpid
> Messaging C++ API. I downloaded and built the 1.39.0 library, and
> got my program to compile.
> I'm specifying the "{protocol:amqp1.0}" connection option. However
> when I try to run the program, I get an exception:
> terminate called after throwing an instance of
> 'qpid::messaging::MessagingException'
> what(): Unsupported protocol: amqp1.0 (valid values are amqp0-10)
>
> After a lot of searching, all I've found is one old thread, which
> talks about setting QPID_LOAD_MODULE to "amqpc.so", which is a file
> that doesn't seem to exist.
> https://lists.apache.org/thread/t5c2dxb22ftwy57dhjyr5jwtym0q7kob
> If I try to set that environment variable to libqpid-proton-cpp.so,
> which I built from the Qpid Proton 0.36.0 library, it errors out
> claiming it can't load the file:
> terminate called after throwing an instance of 'qpid::Exception'
> what(): /.../qpid-proton-
> 0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-
> cpp.so.12.10.0.so: cannot open shared object file: No such file or
> directory: /.../qpid-proton-
> 0.36.0/build/install_dir/usr/local/lib64/libqpid-proton-
> cpp.so.12.10.0.so (/.../qpid-cpp-
> 1.39.0/src/qpid/sys/posix/Shlib.cpp:35)
> If I set it to any other .so, it just goes back to complaining about
> the unsupported protocol.
>
> Can anyone give me some help in this?
> Thanks,
> Rob.
> This e-mail message (together with any attached documents) is
> strictly confidential and intended solely for the addressee
> (including the addressee's employing organization, assigns and
> affiliates). It may contain information that is proprietary to Geneva
> Trading USA LLC, its affiliates and assigns. It is controlled by law,
> or is covered by legal, professional or other privilege. If you are
> not the intended addressee nor associated with the intended
> addressee's organization, you must not use, disclose or copy this
> transmission, and are asked to notify the sender of its receipt.
> Please be further advised that the unauthorized interception or
> retrieval of e-mail may be a criminal violation of the Electronic
> Communications Privacy Act.
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@qpid.apache.org
For additional commands, e-mail: users-help@qpid.apache.org