You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by Bharat Kumar <bh...@citrix.com> on 2013/01/04 07:07:28 UTC
[Discuss] Support for non-contiguous vlan ranges.
Hi all,
In cloudstack we specify the vlan ranges in advanced zone. These vlans are used while creating the guest networks. Presently we can add only one continuos vlan range. There is no way to add non contiguous vlan ranges.
So we propose to add a feature to support adding multiple vlan ranges.
This feature will enable adding non contiguous vlan ranges.
Regards,
Bharat Kumar.
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Abhinandan Prateek <Ab...@citrix.com>.
Bharat,
I think we have sufficient information in the FS. Lets us start working
on it.
-abhi
On 04/01/13 7:29 PM, "Geoff Higginbottom"
<ge...@shapeblue.com> wrote:
>+1 from me
>
>Regards
>
>Geoff
>
>
>-----Original Message-----
>From: Bharat Kumar [mailto:bharat.kumar@citrix.com]
>Sent: 04 January 2013 12:08
>To: cloudstack-users@incubator.apache.org
>Subject: Re: [Discuss] Support for non-contiguous vlan ranges.
>
>
>Hi Prasanna,
> it will support adding multiple non contiguous vlan ranges both while
>creating the zone and after creating it.
>
>Bharat.
>
>On Jan 4, 2013, at 12:03 PM, Prasanna Santhanam <ts...@apache.org> wrote:
>
>> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>>> Hi all,
>>>
>>> In cloudstack we specify the vlan ranges in advanced zone. These
>>> vlans are used while creating the guest networks. Presently we can
>>> add only one continuos vlan range. There is no way to add non
>>> contiguous vlan ranges.
>>>
>>> So we propose to add a feature to support adding multiple vlan
>>> ranges.
>>>
>>> This feature will enable adding non contiguous vlan ranges.
>>>
>>
>> Will it support extending the ranges in non-contiguous increments
>> after the zone has been created?
>>
>> So I start with 100-200 and then later extend my switch and cloudstack
>> to do 300-400, 492 and 50-80 say?
>>
>> --
>> Prasanna.,
>
>
>ShapeBlue provides a range of strategic and technical consulting and
>implementation services to help IT Service Providers and Enterprises to
>build a true IaaS compute cloud. ShapeBlue¹s expertise, combined with
>CloudStack technology, allows IT Service Providers and Enterprises to
>deliver true, utility based, IaaS to the customer or end-user.
>
>________________________________
>
>This email and any attachments to it may be confidential and are intended
>solely for the use of the individual to whom it is addressed. Any views
>or opinions expressed are solely those of the author and do not
>necessarily represent those of Shape Blue Ltd. If you are not the
>intended recipient of this email, you must neither take any action based
>upon its contents, nor copy or show it to anyone. Please contact the
>sender if you believe you have received this email in error. Shape Blue
>Ltd is a company incorporated in England & Wales.
RE: [Discuss] Support for non-contiguous vlan ranges.
Posted by Geoff Higginbottom <ge...@shapeblue.com>.
+1 from me
Regards
Geoff
-----Original Message-----
From: Bharat Kumar [mailto:bharat.kumar@citrix.com]
Sent: 04 January 2013 12:08
To: cloudstack-users@incubator.apache.org
Subject: Re: [Discuss] Support for non-contiguous vlan ranges.
Hi Prasanna,
it will support adding multiple non contiguous vlan ranges both while creating the zone and after creating it.
Bharat.
On Jan 4, 2013, at 12:03 PM, Prasanna Santhanam <ts...@apache.org> wrote:
> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>> Hi all,
>>
>> In cloudstack we specify the vlan ranges in advanced zone. These
>> vlans are used while creating the guest networks. Presently we can
>> add only one continuos vlan range. There is no way to add non
>> contiguous vlan ranges.
>>
>> So we propose to add a feature to support adding multiple vlan
>> ranges.
>>
>> This feature will enable adding non contiguous vlan ranges.
>>
>
> Will it support extending the ranges in non-contiguous increments
> after the zone has been created?
>
> So I start with 100-200 and then later extend my switch and cloudstack
> to do 300-400, 492 and 50-80 say?
>
> --
> Prasanna.,
ShapeBlue provides a range of strategic and technical consulting and implementation services to help IT Service Providers and Enterprises to build a true IaaS compute cloud. ShapeBlue’s expertise, combined with CloudStack technology, allows IT Service Providers and Enterprises to deliver true, utility based, IaaS to the customer or end-user.
________________________________
This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England & Wales.
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Bharat Kumar <bh...@citrix.com>.
Hi Prasanna,
it will support adding multiple non contiguous vlan ranges both while creating the zone and after creating it.
Bharat.
On Jan 4, 2013, at 12:03 PM, Prasanna Santhanam <ts...@apache.org> wrote:
> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>> Hi all,
>>
>> In cloudstack we specify the vlan ranges in advanced zone. These
>> vlans are used while creating the guest networks. Presently we can
>> add only one continuos vlan range. There is no way to add non
>> contiguous vlan ranges.
>>
>> So we propose to add a feature to support adding multiple vlan
>> ranges.
>>
>> This feature will enable adding non contiguous vlan ranges.
>>
>
> Will it support extending the ranges in non-contiguous increments
> after the zone has been created?
>
> So I start with 100-200 and then later extend my switch and cloudstack
> to do 300-400, 492 and 50-80 say?
>
> --
> Prasanna.,
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Bharat Kumar <bh...@citrix.com>.
No we can add or remove only one vlan range at a time.
On Apr 24, 2013, at 10:50 AM, Radhika Puthiyetath <ra...@citrix.com>
wrote:
> Can I add/ remove multiple vlan ranges ( vlan 500- 600, 200- 250; remove 100- 150, 300-350) by using the API?
>
> -----Original Message-----
> From: Bharat Kumar [mailto:bharat.kumar@citrix.com]
> Sent: Thursday, March 14, 2013 1:55 PM
> To: cloudstack-dev@incubator.apache.org
> Subject: Re: [Discuss] Support for non-contiguous vlan ranges.
>
> If the remove fails add will also fail.
>
> Bharat.
> On Mar 13, 2013, at 11:26 AM, Chiradeep Vittal <Ch...@citrix.com> wrote:
>
>> If the remove fails, will the add still succeed?
>>
>> On 3/5/13 11:20 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
>>
>>> The changes will be atomic.
>>> before removing any range we need to check if any of the vlans in the
>>> range are in use. The operation will fail if some vlans in the remove
>>> range are in use.
>>> i.e. if E=100-200 (existing) U(used)=101,121,131 and remove=100-201
>>> we do not remove this range as 101,121, and 131 are being used.
>>> if the admin wants to remove the reset of the range leaving the used
>>> ones he can say remove 100-100, 102-120, etc
>>>
>>> I will update this in the FS.
>>>
>>> Bharat.
>>>
>>> On Mar 6, 2013, at 6:11 AM, Chiradeep Vittal
>>> <Ch...@citrix.com> wrote:
>>>
>>>> Will the changes be atomic? All or nothing?
>>>>
>>>> Existing range E= 100-200, in use U=101,121,131 New request:
>>>> add=201-301, remove=100-201
>>>>
>>>> Or
>>>> E = 100-200, U=110-120
>>>> A = 150-250, R=100-149
>>>>
>>>> etc
>>>>
>>>> On 1/24/13 10:13 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
>>>>
>>>>> Thank you Manan for pointing this out i intended to say multiple
>>>>> Vlans not IPs.
>>>>> I corrected it in the FS.
>>>>>
>>>>> Bharat
>>>>> On Jan 25, 2013, at 4:25 AM, Manan Shah <ma...@citrix.com> wrote:
>>>>>
>>>>>> Bharat, I reviewed the FS and I have the following question. It
>>>>>> states thatŠ
>>>>>>
>>>>>> Admin can update the vlan range after creation or can add multiple
>>>>>> non contiguous vlan ranges while creating a zone. This can be done
>>>>>> by changing the UpdatephysicalNetwork api. It allows only
>>>>>> extending of the vlan. we plan to extend the api to update the
>>>>>> vlan with multiple ip Ranges.
>>>>>>
>>>>>> What does it mean by "we plan to extend the API to update the VLAN
>>>>>> with multiple IP Ranges". Specifically the "Multiple IP Ranges"
>>>>>> part.
>>>>>>
>>>>>> Can you clarify?
>>>>>>
>>>>>>
>>>>>> Regards,
>>>>>> Manan Shah
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 1/4/13 8:49 AM, "Manan Shah" <ma...@citrix.com> wrote:
>>>>>>
>>>>>>> Bharat, I have created a JIRA ticket as well as requirements page
>>>>>>> for this requirement. Please leverage that.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Manan Shah
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>>>>>>>
>>>>>>>> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>>>>>>>>> Hi all,
>>>>>>>>>
>>>>>>>>> In cloudstack we specify the vlan ranges in advanced zone.
>>>>>>>>> These vlans are used while creating the guest networks.
>>>>>>>>> Presently we can add only one continuos vlan range. There is no
>>>>>>>>> way to add non contiguous vlan ranges.
>>>>>>>>>
>>>>>>>>> So we propose to add a feature to support adding multiple vlan
>>>>>>>>> ranges.
>>>>>>>>>
>>>>>>>>> This feature will enable adding non contiguous vlan ranges.
>>>>>>>>>
>>>>>>>>
>>>>>>>> Will it support extending the ranges in non-contiguous
>>>>>>>> increments after the zone has been created?
>>>>>>>>
>>>>>>>> So I start with 100-200 and then later extend my switch and
>>>>>>>> cloudstack to do 300-400, 492 and 50-80 say?
>>>>>>>>
>>>>>>>> --
>>>>>>>> Prasanna.,
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
RE: [Discuss] Support for non-contiguous vlan ranges.
Posted by Radhika Puthiyetath <ra...@citrix.com>.
Can I add/ remove multiple vlan ranges ( vlan 500- 600, 200- 250; remove 100- 150, 300-350) by using the API?
-----Original Message-----
From: Bharat Kumar [mailto:bharat.kumar@citrix.com]
Sent: Thursday, March 14, 2013 1:55 PM
To: cloudstack-dev@incubator.apache.org
Subject: Re: [Discuss] Support for non-contiguous vlan ranges.
If the remove fails add will also fail.
Bharat.
On Mar 13, 2013, at 11:26 AM, Chiradeep Vittal <Ch...@citrix.com> wrote:
> If the remove fails, will the add still succeed?
>
> On 3/5/13 11:20 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
>
>> The changes will be atomic.
>> before removing any range we need to check if any of the vlans in the
>> range are in use. The operation will fail if some vlans in the remove
>> range are in use.
>> i.e. if E=100-200 (existing) U(used)=101,121,131 and remove=100-201
>> we do not remove this range as 101,121, and 131 are being used.
>> if the admin wants to remove the reset of the range leaving the used
>> ones he can say remove 100-100, 102-120, etc
>>
>> I will update this in the FS.
>>
>> Bharat.
>>
>> On Mar 6, 2013, at 6:11 AM, Chiradeep Vittal
>> <Ch...@citrix.com> wrote:
>>
>>> Will the changes be atomic? All or nothing?
>>>
>>> Existing range E= 100-200, in use U=101,121,131 New request:
>>> add=201-301, remove=100-201
>>>
>>> Or
>>> E = 100-200, U=110-120
>>> A = 150-250, R=100-149
>>>
>>> etc
>>>
>>> On 1/24/13 10:13 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
>>>
>>>> Thank you Manan for pointing this out i intended to say multiple
>>>> Vlans not IPs.
>>>> I corrected it in the FS.
>>>>
>>>> Bharat
>>>> On Jan 25, 2013, at 4:25 AM, Manan Shah <ma...@citrix.com> wrote:
>>>>
>>>>> Bharat, I reviewed the FS and I have the following question. It
>>>>> states thatŠ
>>>>>
>>>>> Admin can update the vlan range after creation or can add multiple
>>>>> non contiguous vlan ranges while creating a zone. This can be done
>>>>> by changing the UpdatephysicalNetwork api. It allows only
>>>>> extending of the vlan. we plan to extend the api to update the
>>>>> vlan with multiple ip Ranges.
>>>>>
>>>>> What does it mean by "we plan to extend the API to update the VLAN
>>>>> with multiple IP Ranges". Specifically the "Multiple IP Ranges"
>>>>> part.
>>>>>
>>>>> Can you clarify?
>>>>>
>>>>>
>>>>> Regards,
>>>>> Manan Shah
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 1/4/13 8:49 AM, "Manan Shah" <ma...@citrix.com> wrote:
>>>>>
>>>>>> Bharat, I have created a JIRA ticket as well as requirements page
>>>>>> for this requirement. Please leverage that.
>>>>>>
>>>>>> Regards,
>>>>>> Manan Shah
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>>>>>>
>>>>>>> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>> In cloudstack we specify the vlan ranges in advanced zone.
>>>>>>>> These vlans are used while creating the guest networks.
>>>>>>>> Presently we can add only one continuos vlan range. There is no
>>>>>>>> way to add non contiguous vlan ranges.
>>>>>>>>
>>>>>>>> So we propose to add a feature to support adding multiple vlan
>>>>>>>> ranges.
>>>>>>>>
>>>>>>>> This feature will enable adding non contiguous vlan ranges.
>>>>>>>>
>>>>>>>
>>>>>>> Will it support extending the ranges in non-contiguous
>>>>>>> increments after the zone has been created?
>>>>>>>
>>>>>>> So I start with 100-200 and then later extend my switch and
>>>>>>> cloudstack to do 300-400, 492 and 50-80 say?
>>>>>>>
>>>>>>> --
>>>>>>> Prasanna.,
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Bharat Kumar <bh...@citrix.com>.
If the remove fails add will also fail.
Bharat.
On Mar 13, 2013, at 11:26 AM, Chiradeep Vittal <Ch...@citrix.com> wrote:
> If the remove fails, will the add still succeed?
>
> On 3/5/13 11:20 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
>
>> The changes will be atomic.
>> before removing any range we need to check if any of the vlans in the
>> range are in use. The operation will fail if some vlans in the remove
>> range are in use.
>> i.e. if E=100-200 (existing) U(used)=101,121,131
>> and remove=100-201 we do not remove this range as 101,121, and 131 are
>> being used.
>> if the admin wants to remove the reset of the range leaving the used ones
>> he can say
>> remove 100-100, 102-120, etc
>>
>> I will update this in the FS.
>>
>> Bharat.
>>
>> On Mar 6, 2013, at 6:11 AM, Chiradeep Vittal
>> <Ch...@citrix.com> wrote:
>>
>>> Will the changes be atomic? All or nothing?
>>>
>>> Existing range E= 100-200, in use U=101,121,131
>>> New request: add=201-301, remove=100-201
>>>
>>> Or
>>> E = 100-200, U=110-120
>>> A = 150-250, R=100-149
>>>
>>> etc
>>>
>>> On 1/24/13 10:13 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
>>>
>>>> Thank you Manan for pointing this out i intended to say multiple Vlans
>>>> not IPs.
>>>> I corrected it in the FS.
>>>>
>>>> Bharat
>>>> On Jan 25, 2013, at 4:25 AM, Manan Shah <ma...@citrix.com> wrote:
>>>>
>>>>> Bharat, I reviewed the FS and I have the following question. It states
>>>>> thatŠ
>>>>>
>>>>> Admin can update the vlan range after creation or can add multiple non
>>>>> contiguous vlan ranges while creating a zone. This can be done by
>>>>> changing the UpdatephysicalNetwork api. It allows only extending of
>>>>> the
>>>>> vlan. we plan to extend the api to update the vlan with multiple ip
>>>>> Ranges.
>>>>>
>>>>> What does it mean by "we plan to extend the API to update the VLAN
>>>>> with
>>>>> multiple IP Ranges". Specifically the "Multiple IP Ranges" part.
>>>>>
>>>>> Can you clarify?
>>>>>
>>>>>
>>>>> Regards,
>>>>> Manan Shah
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 1/4/13 8:49 AM, "Manan Shah" <ma...@citrix.com> wrote:
>>>>>
>>>>>> Bharat, I have created a JIRA ticket as well as requirements page for
>>>>>> this
>>>>>> requirement. Please leverage that.
>>>>>>
>>>>>> Regards,
>>>>>> Manan Shah
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>>>>>>
>>>>>>> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>> In cloudstack we specify the vlan ranges in advanced zone. These
>>>>>>>> vlans are used while creating the guest networks. Presently we can
>>>>>>>> add only one continuos vlan range. There is no way to add non
>>>>>>>> contiguous vlan ranges.
>>>>>>>>
>>>>>>>> So we propose to add a feature to support adding multiple vlan
>>>>>>>> ranges.
>>>>>>>>
>>>>>>>> This feature will enable adding non contiguous vlan ranges.
>>>>>>>>
>>>>>>>
>>>>>>> Will it support extending the ranges in non-contiguous increments
>>>>>>> after the zone has been created?
>>>>>>>
>>>>>>> So I start with 100-200 and then later extend my switch and
>>>>>>> cloudstack
>>>>>>> to do 300-400, 492 and 50-80 say?
>>>>>>>
>>>>>>> --
>>>>>>> Prasanna.,
>>>>>>
>>>>>
>>>>
>>>
>>
>
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Chiradeep Vittal <Ch...@citrix.com>.
If the remove fails, will the add still succeed?
On 3/5/13 11:20 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
>The changes will be atomic.
>before removing any range we need to check if any of the vlans in the
>range are in use. The operation will fail if some vlans in the remove
>range are in use.
>i.e. if E=100-200 (existing) U(used)=101,121,131
>and remove=100-201 we do not remove this range as 101,121, and 131 are
>being used.
>if the admin wants to remove the reset of the range leaving the used ones
>he can say
>remove 100-100, 102-120, etc
>
>I will update this in the FS.
>
>Bharat.
>
>On Mar 6, 2013, at 6:11 AM, Chiradeep Vittal
><Ch...@citrix.com> wrote:
>
>> Will the changes be atomic? All or nothing?
>>
>> Existing range E= 100-200, in use U=101,121,131
>> New request: add=201-301, remove=100-201
>>
>> Or
>> E = 100-200, U=110-120
>> A = 150-250, R=100-149
>>
>> etc
>>
>> On 1/24/13 10:13 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
>>
>>> Thank you Manan for pointing this out i intended to say multiple Vlans
>>> not IPs.
>>> I corrected it in the FS.
>>>
>>> Bharat
>>> On Jan 25, 2013, at 4:25 AM, Manan Shah <ma...@citrix.com> wrote:
>>>
>>>> Bharat, I reviewed the FS and I have the following question. It states
>>>> thatŠ
>>>>
>>>> Admin can update the vlan range after creation or can add multiple non
>>>> contiguous vlan ranges while creating a zone. This can be done by
>>>> changing the UpdatephysicalNetwork api. It allows only extending of
>>>>the
>>>> vlan. we plan to extend the api to update the vlan with multiple ip
>>>> Ranges.
>>>>
>>>> What does it mean by "we plan to extend the API to update the VLAN
>>>>with
>>>> multiple IP Ranges". Specifically the "Multiple IP Ranges" part.
>>>>
>>>> Can you clarify?
>>>>
>>>>
>>>> Regards,
>>>> Manan Shah
>>>>
>>>>
>>>>
>>>>
>>>> On 1/4/13 8:49 AM, "Manan Shah" <ma...@citrix.com> wrote:
>>>>
>>>>> Bharat, I have created a JIRA ticket as well as requirements page for
>>>>> this
>>>>> requirement. Please leverage that.
>>>>>
>>>>> Regards,
>>>>> Manan Shah
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>>>>>
>>>>>> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>>>>>>> Hi all,
>>>>>>>
>>>>>>> In cloudstack we specify the vlan ranges in advanced zone. These
>>>>>>> vlans are used while creating the guest networks. Presently we can
>>>>>>> add only one continuos vlan range. There is no way to add non
>>>>>>> contiguous vlan ranges.
>>>>>>>
>>>>>>> So we propose to add a feature to support adding multiple vlan
>>>>>>> ranges.
>>>>>>>
>>>>>>> This feature will enable adding non contiguous vlan ranges.
>>>>>>>
>>>>>>
>>>>>> Will it support extending the ranges in non-contiguous increments
>>>>>> after the zone has been created?
>>>>>>
>>>>>> So I start with 100-200 and then later extend my switch and
>>>>>>cloudstack
>>>>>> to do 300-400, 492 and 50-80 say?
>>>>>>
>>>>>> --
>>>>>> Prasanna.,
>>>>>
>>>>
>>>
>>
>
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Bharat Kumar <bh...@citrix.com>.
The changes will be atomic.
before removing any range we need to check if any of the vlans in the range are in use. The operation will fail if some vlans in the remove range are in use.
i.e. if E=100-200 (existing) U(used)=101,121,131
and remove=100-201 we do not remove this range as 101,121, and 131 are being used.
if the admin wants to remove the reset of the range leaving the used ones he can say
remove 100-100, 102-120, etc
I will update this in the FS.
Bharat.
On Mar 6, 2013, at 6:11 AM, Chiradeep Vittal <Ch...@citrix.com> wrote:
> Will the changes be atomic? All or nothing?
>
> Existing range E= 100-200, in use U=101,121,131
> New request: add=201-301, remove=100-201
>
> Or
> E = 100-200, U=110-120
> A = 150-250, R=100-149
>
> etc
>
> On 1/24/13 10:13 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
>
>> Thank you Manan for pointing this out i intended to say multiple Vlans
>> not IPs.
>> I corrected it in the FS.
>>
>> Bharat
>> On Jan 25, 2013, at 4:25 AM, Manan Shah <ma...@citrix.com> wrote:
>>
>>> Bharat, I reviewed the FS and I have the following question. It states
>>> thatŠ
>>>
>>> Admin can update the vlan range after creation or can add multiple non
>>> contiguous vlan ranges while creating a zone. This can be done by
>>> changing the UpdatephysicalNetwork api. It allows only extending of the
>>> vlan. we plan to extend the api to update the vlan with multiple ip
>>> Ranges.
>>>
>>> What does it mean by "we plan to extend the API to update the VLAN with
>>> multiple IP Ranges". Specifically the "Multiple IP Ranges" part.
>>>
>>> Can you clarify?
>>>
>>>
>>> Regards,
>>> Manan Shah
>>>
>>>
>>>
>>>
>>> On 1/4/13 8:49 AM, "Manan Shah" <ma...@citrix.com> wrote:
>>>
>>>> Bharat, I have created a JIRA ticket as well as requirements page for
>>>> this
>>>> requirement. Please leverage that.
>>>>
>>>> Regards,
>>>> Manan Shah
>>>>
>>>>
>>>>
>>>>
>>>> On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>>>>
>>>>> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> In cloudstack we specify the vlan ranges in advanced zone. These
>>>>>> vlans are used while creating the guest networks. Presently we can
>>>>>> add only one continuos vlan range. There is no way to add non
>>>>>> contiguous vlan ranges.
>>>>>>
>>>>>> So we propose to add a feature to support adding multiple vlan
>>>>>> ranges.
>>>>>>
>>>>>> This feature will enable adding non contiguous vlan ranges.
>>>>>>
>>>>>
>>>>> Will it support extending the ranges in non-contiguous increments
>>>>> after the zone has been created?
>>>>>
>>>>> So I start with 100-200 and then later extend my switch and cloudstack
>>>>> to do 300-400, 492 and 50-80 say?
>>>>>
>>>>> --
>>>>> Prasanna.,
>>>>
>>>
>>
>
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Chiradeep Vittal <Ch...@citrix.com>.
Will the changes be atomic? All or nothing?
Existing range E= 100-200, in use U=101,121,131
New request: add=201-301, remove=100-201
Or
E = 100-200, U=110-120
A = 150-250, R=100-149
etc
On 1/24/13 10:13 PM, "Bharat Kumar" <bh...@citrix.com> wrote:
> Thank you Manan for pointing this out i intended to say multiple Vlans
>not IPs.
>I corrected it in the FS.
>
>Bharat
>On Jan 25, 2013, at 4:25 AM, Manan Shah <ma...@citrix.com> wrote:
>
>> Bharat, I reviewed the FS and I have the following question. It states
>> thatŠ
>>
>> Admin can update the vlan range after creation or can add multiple non
>> contiguous vlan ranges while creating a zone. This can be done by
>> changing the UpdatephysicalNetwork api. It allows only extending of the
>> vlan. we plan to extend the api to update the vlan with multiple ip
>> Ranges.
>>
>> What does it mean by "we plan to extend the API to update the VLAN with
>> multiple IP Ranges". Specifically the "Multiple IP Ranges" part.
>>
>> Can you clarify?
>>
>>
>> Regards,
>> Manan Shah
>>
>>
>>
>>
>> On 1/4/13 8:49 AM, "Manan Shah" <ma...@citrix.com> wrote:
>>
>>> Bharat, I have created a JIRA ticket as well as requirements page for
>>>this
>>> requirement. Please leverage that.
>>>
>>> Regards,
>>> Manan Shah
>>>
>>>
>>>
>>>
>>> On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>>>
>>>> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>>>>> Hi all,
>>>>>
>>>>> In cloudstack we specify the vlan ranges in advanced zone. These
>>>>> vlans are used while creating the guest networks. Presently we can
>>>>> add only one continuos vlan range. There is no way to add non
>>>>> contiguous vlan ranges.
>>>>>
>>>>> So we propose to add a feature to support adding multiple vlan
>>>>> ranges.
>>>>>
>>>>> This feature will enable adding non contiguous vlan ranges.
>>>>>
>>>>
>>>> Will it support extending the ranges in non-contiguous increments
>>>> after the zone has been created?
>>>>
>>>> So I start with 100-200 and then later extend my switch and cloudstack
>>>> to do 300-400, 492 and 50-80 say?
>>>>
>>>> --
>>>> Prasanna.,
>>>
>>
>
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Bharat Kumar <bh...@citrix.com>.
Thank you Manan for pointing this out i intended to say multiple Vlans not IPs.
I corrected it in the FS.
Bharat
On Jan 25, 2013, at 4:25 AM, Manan Shah <ma...@citrix.com> wrote:
> Bharat, I reviewed the FS and I have the following question. It states
> thatŠ
>
> Admin can update the vlan range after creation or can add multiple non
> contiguous vlan ranges while creating a zone. This can be done by
> changing the UpdatephysicalNetwork api. It allows only extending of the
> vlan. we plan to extend the api to update the vlan with multiple ip
> Ranges.
>
> What does it mean by "we plan to extend the API to update the VLAN with
> multiple IP Ranges". Specifically the "Multiple IP Ranges" part.
>
> Can you clarify?
>
>
> Regards,
> Manan Shah
>
>
>
>
> On 1/4/13 8:49 AM, "Manan Shah" <ma...@citrix.com> wrote:
>
>> Bharat, I have created a JIRA ticket as well as requirements page for this
>> requirement. Please leverage that.
>>
>> Regards,
>> Manan Shah
>>
>>
>>
>>
>> On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>>
>>> On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>>>> Hi all,
>>>>
>>>> In cloudstack we specify the vlan ranges in advanced zone. These
>>>> vlans are used while creating the guest networks. Presently we can
>>>> add only one continuos vlan range. There is no way to add non
>>>> contiguous vlan ranges.
>>>>
>>>> So we propose to add a feature to support adding multiple vlan
>>>> ranges.
>>>>
>>>> This feature will enable adding non contiguous vlan ranges.
>>>>
>>>
>>> Will it support extending the ranges in non-contiguous increments
>>> after the zone has been created?
>>>
>>> So I start with 100-200 and then later extend my switch and cloudstack
>>> to do 300-400, 492 and 50-80 say?
>>>
>>> --
>>> Prasanna.,
>>
>
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Manan Shah <ma...@citrix.com>.
Bharat, I reviewed the FS and I have the following question. It states
thatŠ
Admin can update the vlan range after creation or can add multiple non
contiguous vlan ranges while creating a zone. This can be done by
changing the UpdatephysicalNetwork api. It allows only extending of the
vlan. we plan to extend the api to update the vlan with multiple ip
Ranges.
What does it mean by "we plan to extend the API to update the VLAN with
multiple IP Ranges". Specifically the "Multiple IP Ranges" part.
Can you clarify?
Regards,
Manan Shah
On 1/4/13 8:49 AM, "Manan Shah" <ma...@citrix.com> wrote:
>Bharat, I have created a JIRA ticket as well as requirements page for this
>requirement. Please leverage that.
>
>Regards,
>Manan Shah
>
>
>
>
>On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>
>>On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>>> Hi all,
>>>
>>> In cloudstack we specify the vlan ranges in advanced zone. These
>>> vlans are used while creating the guest networks. Presently we can
>>> add only one continuos vlan range. There is no way to add non
>>> contiguous vlan ranges.
>>>
>>> So we propose to add a feature to support adding multiple vlan
>>> ranges.
>>>
>>> This feature will enable adding non contiguous vlan ranges.
>>>
>>
>>Will it support extending the ranges in non-contiguous increments
>>after the zone has been created?
>>
>>So I start with 100-200 and then later extend my switch and cloudstack
>>to do 300-400, 492 and 50-80 say?
>>
>>--
>>Prasanna.,
>
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Manan Shah <ma...@citrix.com>.
Bharat, I have created a JIRA ticket as well as requirements page for this
requirement. Please leverage that.
Regards,
Manan Shah
On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>> Hi all,
>>
>> In cloudstack we specify the vlan ranges in advanced zone. These
>> vlans are used while creating the guest networks. Presently we can
>> add only one continuos vlan range. There is no way to add non
>> contiguous vlan ranges.
>>
>> So we propose to add a feature to support adding multiple vlan
>> ranges.
>>
>> This feature will enable adding non contiguous vlan ranges.
>>
>
>Will it support extending the ranges in non-contiguous increments
>after the zone has been created?
>
>So I start with 100-200 and then later extend my switch and cloudstack
>to do 300-400, 492 and 50-80 say?
>
>--
>Prasanna.,
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Manan Shah <ma...@citrix.com>.
Bharat, I have created a JIRA ticket as well as requirements page for this
requirement. Please leverage that.
Regards,
Manan Shah
On 1/3/13 10:33 PM, "Prasanna Santhanam" <ts...@apache.org> wrote:
>On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
>> Hi all,
>>
>> In cloudstack we specify the vlan ranges in advanced zone. These
>> vlans are used while creating the guest networks. Presently we can
>> add only one continuos vlan range. There is no way to add non
>> contiguous vlan ranges.
>>
>> So we propose to add a feature to support adding multiple vlan
>> ranges.
>>
>> This feature will enable adding non contiguous vlan ranges.
>>
>
>Will it support extending the ranges in non-contiguous increments
>after the zone has been created?
>
>So I start with 100-200 and then later extend my switch and cloudstack
>to do 300-400, 492 and 50-80 say?
>
>--
>Prasanna.,
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Prasanna Santhanam <ts...@apache.org>.
On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
> Hi all,
>
> In cloudstack we specify the vlan ranges in advanced zone. These
> vlans are used while creating the guest networks. Presently we can
> add only one continuos vlan range. There is no way to add non
> contiguous vlan ranges.
>
> So we propose to add a feature to support adding multiple vlan
> ranges.
>
> This feature will enable adding non contiguous vlan ranges.
>
Will it support extending the ranges in non-contiguous increments
after the zone has been created?
So I start with 100-200 and then later extend my switch and cloudstack
to do 300-400, 492 and 50-80 say?
--
Prasanna.,
Re: [Discuss] Support for non-contiguous vlan ranges.
Posted by Prasanna Santhanam <ts...@apache.org>.
On Fri, Jan 04, 2013 at 11:37:28AM +0530, Bharat Kumar wrote:
> Hi all,
>
> In cloudstack we specify the vlan ranges in advanced zone. These
> vlans are used while creating the guest networks. Presently we can
> add only one continuos vlan range. There is no way to add non
> contiguous vlan ranges.
>
> So we propose to add a feature to support adding multiple vlan
> ranges.
>
> This feature will enable adding non contiguous vlan ranges.
>
Will it support extending the ranges in non-contiguous increments
after the zone has been created?
So I start with 100-200 and then later extend my switch and cloudstack
to do 300-400, 492 and 50-80 say?
--
Prasanna.,