You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Jerry Jiang <je...@tyxtech.com> on 2013/04/22 12:09:37 UTC
答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of
parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not
what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
RE: The IPaddr parameter for vmcreate API
Posted by Pranav Saxena <pr...@citrix.com>.
I am not sure why it's not updating the vm OS thought it actually should have been doing that. Which branch are you working out of ? If you are able to reproduce this issue again , please do file a bug ticket .
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 3:25 PM
To: dev@cloudstack.apache.org; users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
I would say - in this case, though vrouter(dhcp server) binds mac and ip for vm instance, it doesn't update vm Operating system from inside. What happens if I setup vm's OS as static IP address mode?
Thanks
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月26日 星期五 16:37
收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
I think you are absolutely right ..that's how IP allocation works! Any issues ?
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 1:45 PM
To: users@cloudstack.apache.org
Cc: dev@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is, Vrouter works as a dhcp server, and the template for vm is setup to dhcp mode When cs tries to create a vm, it picks up an available IP from the IP Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases below), the runtime exception "Does not support custom ip allocation at this time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original ip can be changed automatically by ExternalGuestNetworkGuru after the vm is stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each Pod, so the decision about which ip address to take happens after Allocators figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
Re: The IPaddr parameter for vmcreate API
Posted by Jayapal Reddy Uradi <ja...@citrix.com>.
Hi Jiri,
If you pass ip addr to API to create VM.
- If IP addr is not in vm network cidd, or ip is not available in that network VM creation will fail.
- If ip is not available then CS will not pick another ip.
If your case is there any other dhcp server in guest network serving ip to the VM ?
Thanks,
Jayapal
On 26-Apr-2013, at 3:36 PM, Jerry Jiang <je...@tyxtech.com> wrote:
> Hello Pranav,
>
> Sorry I also want to ask another case before I tap the send button.
>
> If a certain IP is assigned by user and give the VMcreate API as a
> parameter,
> Still, vrouter will bind the ip and vm's mac address, right?
> If so, is it possible router found the specified IP is bound out and stayed
> in cache, and it pick up another one to create a vm?
>
> Jerry
>
> -----邮件原件-----
> 发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
> 发送时间: 2013年4月26日 星期五 17:55
> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> 主题: 答复: The IPaddr parameter for vmcreate API
>
> Hello Pranav,
>
> I would say - in this case, though vrouter(dhcp server) binds mac and ip for
> vm instance, it doesn't update vm Operating system from inside. What happens
> if I setup vm's OS as static IP address mode?
>
> Thanks
> Jerry
>
> -----邮件原件-----
> 发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
> 发送时间: 2013年4月26日 星期五 16:37
> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> 主题: RE: The IPaddr parameter for vmcreate API
>
> I think you are absolutely right ..that's how IP allocation works! Any
> issues ?
>
> Thanks,
> Pranav
>
> -----Original Message-----
> From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
> Sent: Friday, April 26, 2013 1:45 PM
> To: users@cloudstack.apache.org
> Cc: dev@cloudstack.apache.org
> Subject: 答复: The IPaddr parameter for vmcreate API
>
> Hello Pranav,
>
> Thanks for your response.
>
> My understanding for how CS allocating IP addresses to vm instance is,
> Vrouter works as a dhcp server, and the template for vm is setup to dhcp
> mode When cs tries to create a vm, it picks up an available IP from the IP
> Pool and assign it to targeted vm instance. Am I right?
>
> Jerry
> -----邮件原件-----
> 发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
> 发送时间: 2013年4月22日 星期一 18:57
> 收件人: users@cloudstack.apache.org
> 抄送: dev@cloudstack.apache.org
> 主题: RE: The IPaddr parameter for vmcreate API
>
> Hey Jerry,
>
> Custom ip allocation failure leads to vm deploy failure. Happens in
> following cases:
> ============================================================================
> ========
> * If ipAddress doesn't exist in the network.
> * If requested ip address exists in the network, but already allocated.
> * If network model doesn't support custom ip allocation (see list of cases
> below), the runtime exception "Does not support custom ip allocation at this
> time" is being thrown.
>
>
> Custom ip allocation is SUPORTED FOR -
>
> * Guest Virtual Network
> * Direct network in Advanced zone
>
>
> NOT SUPPORTED -
>
> * ExternalFirewall setup case. The reason for not supporting: the original
> ip can be changed automatically by ExternalGuestNetworkGuru after the vm is
> stopped/started.
> * Basic zone - as we have 1 Global Network, but separate ip ranges per each
> Pod, so the decision about which ip address to take happens after Allocators
> figure out the destination Pod.
> If you specify the ip address of Pod2, and allocators will pick up Pod1
> - the vm creation will fail.
>
> So you can figure out which case might explain your problem to the best
> extent possible.
>
> Thanks,
> Pranav
> -----Original Message-----
> From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
> Sent: Monday, April 22, 2013 3:40 PM
> To: users@cloudstack.apache.org
> Subject: 答复: The IPaddr parameter for vmcreate API
>
> Anyone has reponsed to the issue, thanks in advance.
>
>
>
> jerry
>
>
>
> 发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
> 发送时间: 2013年4月18日 星期四 10:29
> 收件人: 'users@cloudstack.apache.org'
> 主题: The IPaddr parameter for vmcreate API
>
>
>
> Hello all,
>
>
>
> I am using cloudstack API to create a VM instance. The IP address as one of
> parameters is provided to API
>
> However, I found it didn’t work well, The IP address of creating VM is not
> what I provided for API.
>
> Eg, using IP1 as the parameter, the vm operational IP addr is IP2
>
>
>
> Why does this issue happen?
>
>
>
> Thanks
>
> Jerry
>
>
>
Re: The IPaddr parameter for vmcreate API
Posted by Jayapal Reddy Uradi <ja...@citrix.com>.
Hi Jiri,
If you pass ip addr to API to create VM.
- If IP addr is not in vm network cidd, or ip is not available in that network VM creation will fail.
- If ip is not available then CS will not pick another ip.
If your case is there any other dhcp server in guest network serving ip to the VM ?
Thanks,
Jayapal
On 26-Apr-2013, at 3:36 PM, Jerry Jiang <je...@tyxtech.com> wrote:
> Hello Pranav,
>
> Sorry I also want to ask another case before I tap the send button.
>
> If a certain IP is assigned by user and give the VMcreate API as a
> parameter,
> Still, vrouter will bind the ip and vm's mac address, right?
> If so, is it possible router found the specified IP is bound out and stayed
> in cache, and it pick up another one to create a vm?
>
> Jerry
>
> -----邮件原件-----
> 发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
> 发送时间: 2013年4月26日 星期五 17:55
> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> 主题: 答复: The IPaddr parameter for vmcreate API
>
> Hello Pranav,
>
> I would say - in this case, though vrouter(dhcp server) binds mac and ip for
> vm instance, it doesn't update vm Operating system from inside. What happens
> if I setup vm's OS as static IP address mode?
>
> Thanks
> Jerry
>
> -----邮件原件-----
> 发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
> 发送时间: 2013年4月26日 星期五 16:37
> 收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
> 主题: RE: The IPaddr parameter for vmcreate API
>
> I think you are absolutely right ..that's how IP allocation works! Any
> issues ?
>
> Thanks,
> Pranav
>
> -----Original Message-----
> From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
> Sent: Friday, April 26, 2013 1:45 PM
> To: users@cloudstack.apache.org
> Cc: dev@cloudstack.apache.org
> Subject: 答复: The IPaddr parameter for vmcreate API
>
> Hello Pranav,
>
> Thanks for your response.
>
> My understanding for how CS allocating IP addresses to vm instance is,
> Vrouter works as a dhcp server, and the template for vm is setup to dhcp
> mode When cs tries to create a vm, it picks up an available IP from the IP
> Pool and assign it to targeted vm instance. Am I right?
>
> Jerry
> -----邮件原件-----
> 发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
> 发送时间: 2013年4月22日 星期一 18:57
> 收件人: users@cloudstack.apache.org
> 抄送: dev@cloudstack.apache.org
> 主题: RE: The IPaddr parameter for vmcreate API
>
> Hey Jerry,
>
> Custom ip allocation failure leads to vm deploy failure. Happens in
> following cases:
> ============================================================================
> ========
> * If ipAddress doesn't exist in the network.
> * If requested ip address exists in the network, but already allocated.
> * If network model doesn't support custom ip allocation (see list of cases
> below), the runtime exception "Does not support custom ip allocation at this
> time" is being thrown.
>
>
> Custom ip allocation is SUPORTED FOR -
>
> * Guest Virtual Network
> * Direct network in Advanced zone
>
>
> NOT SUPPORTED -
>
> * ExternalFirewall setup case. The reason for not supporting: the original
> ip can be changed automatically by ExternalGuestNetworkGuru after the vm is
> stopped/started.
> * Basic zone - as we have 1 Global Network, but separate ip ranges per each
> Pod, so the decision about which ip address to take happens after Allocators
> figure out the destination Pod.
> If you specify the ip address of Pod2, and allocators will pick up Pod1
> - the vm creation will fail.
>
> So you can figure out which case might explain your problem to the best
> extent possible.
>
> Thanks,
> Pranav
> -----Original Message-----
> From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
> Sent: Monday, April 22, 2013 3:40 PM
> To: users@cloudstack.apache.org
> Subject: 答复: The IPaddr parameter for vmcreate API
>
> Anyone has reponsed to the issue, thanks in advance.
>
>
>
> jerry
>
>
>
> 发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
> 发送时间: 2013年4月18日 星期四 10:29
> 收件人: 'users@cloudstack.apache.org'
> 主题: The IPaddr parameter for vmcreate API
>
>
>
> Hello all,
>
>
>
> I am using cloudstack API to create a VM instance. The IP address as one of
> parameters is provided to API
>
> However, I found it didn’t work well, The IP address of creating VM is not
> what I provided for API.
>
> Eg, using IP1 as the parameter, the vm operational IP addr is IP2
>
>
>
> Why does this issue happen?
>
>
>
> Thanks
>
> Jerry
>
>
>
答复: The IPaddr parameter for vmcreate API
Posted by Jerry Jiang <je...@tyxtech.com>.
Hello Pranav,
Sorry I also want to ask another case before I tap the send button.
If a certain IP is assigned by user and give the VMcreate API as a
parameter,
Still, vrouter will bind the ip and vm's mac address, right?
If so, is it possible router found the specified IP is bound out and stayed
in cache, and it pick up another one to create a vm?
Jerry
-----邮件原件-----
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月26日 星期五 17:55
收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
主题: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
I would say - in this case, though vrouter(dhcp server) binds mac and ip for
vm instance, it doesn't update vm Operating system from inside. What happens
if I setup vm's OS as static IP address mode?
Thanks
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月26日 星期五 16:37
收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
I think you are absolutely right ..that's how IP allocation works! Any
issues ?
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 1:45 PM
To: users@cloudstack.apache.org
Cc: dev@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is,
Vrouter works as a dhcp server, and the template for vm is setup to dhcp
mode When cs tries to create a vm, it picks up an available IP from the IP
Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in
following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases
below), the runtime exception "Does not support custom ip allocation at this
time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original
ip can be changed automatically by ExternalGuestNetworkGuru after the vm is
stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each
Pod, so the decision about which ip address to take happens after Allocators
figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best
extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of
parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not
what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
答复: The IPaddr parameter for vmcreate API
Posted by Jerry Jiang <je...@tyxtech.com>.
Hello Pranav,
Sorry I also want to ask another case before I tap the send button.
If a certain IP is assigned by user and give the VMcreate API as a
parameter,
Still, vrouter will bind the ip and vm's mac address, right?
If so, is it possible router found the specified IP is bound out and stayed
in cache, and it pick up another one to create a vm?
Jerry
-----邮件原件-----
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月26日 星期五 17:55
收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
主题: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
I would say - in this case, though vrouter(dhcp server) binds mac and ip for
vm instance, it doesn't update vm Operating system from inside. What happens
if I setup vm's OS as static IP address mode?
Thanks
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月26日 星期五 16:37
收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
I think you are absolutely right ..that's how IP allocation works! Any
issues ?
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 1:45 PM
To: users@cloudstack.apache.org
Cc: dev@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is,
Vrouter works as a dhcp server, and the template for vm is setup to dhcp
mode When cs tries to create a vm, it picks up an available IP from the IP
Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in
following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases
below), the runtime exception "Does not support custom ip allocation at this
time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original
ip can be changed automatically by ExternalGuestNetworkGuru after the vm is
stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each
Pod, so the decision about which ip address to take happens after Allocators
figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best
extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of
parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not
what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
RE: The IPaddr parameter for vmcreate API
Posted by Pranav Saxena <pr...@citrix.com>.
I am not sure why it's not updating the vm OS thought it actually should have been doing that. Which branch are you working out of ? If you are able to reproduce this issue again , please do file a bug ticket .
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 3:25 PM
To: dev@cloudstack.apache.org; users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
I would say - in this case, though vrouter(dhcp server) binds mac and ip for vm instance, it doesn't update vm Operating system from inside. What happens if I setup vm's OS as static IP address mode?
Thanks
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月26日 星期五 16:37
收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
I think you are absolutely right ..that's how IP allocation works! Any issues ?
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 1:45 PM
To: users@cloudstack.apache.org
Cc: dev@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is, Vrouter works as a dhcp server, and the template for vm is setup to dhcp mode When cs tries to create a vm, it picks up an available IP from the IP Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases below), the runtime exception "Does not support custom ip allocation at this time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original ip can be changed automatically by ExternalGuestNetworkGuru after the vm is stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each Pod, so the decision about which ip address to take happens after Allocators figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
答复: The IPaddr parameter for vmcreate API
Posted by Jerry Jiang <je...@tyxtech.com>.
Hello Pranav,
I would say - in this case, though vrouter(dhcp server) binds mac and ip for
vm instance, it doesn't update vm Operating system from inside. What happens
if I setup vm's OS as static IP address mode?
Thanks
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月26日 星期五 16:37
收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
I think you are absolutely right ..that's how IP allocation works! Any
issues ?
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 1:45 PM
To: users@cloudstack.apache.org
Cc: dev@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is,
Vrouter works as a dhcp server, and the template for vm is setup to dhcp
mode When cs tries to create a vm, it picks up an available IP from the IP
Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in
following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases
below), the runtime exception "Does not support custom ip allocation at this
time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original
ip can be changed automatically by ExternalGuestNetworkGuru after the vm is
stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each
Pod, so the decision about which ip address to take happens after Allocators
figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best
extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of
parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not
what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
答复: The IPaddr parameter for vmcreate API
Posted by Jerry Jiang <je...@tyxtech.com>.
Hello Pranav,
I would say - in this case, though vrouter(dhcp server) binds mac and ip for
vm instance, it doesn't update vm Operating system from inside. What happens
if I setup vm's OS as static IP address mode?
Thanks
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月26日 星期五 16:37
收件人: dev@cloudstack.apache.org; users@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
I think you are absolutely right ..that's how IP allocation works! Any
issues ?
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 1:45 PM
To: users@cloudstack.apache.org
Cc: dev@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is,
Vrouter works as a dhcp server, and the template for vm is setup to dhcp
mode When cs tries to create a vm, it picks up an available IP from the IP
Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in
following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases
below), the runtime exception "Does not support custom ip allocation at this
time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original
ip can be changed automatically by ExternalGuestNetworkGuru after the vm is
stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each
Pod, so the decision about which ip address to take happens after Allocators
figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best
extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of
parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not
what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
RE: The IPaddr parameter for vmcreate API
Posted by Pranav Saxena <pr...@citrix.com>.
I think you are absolutely right ..that's how IP allocation works! Any issues ?
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 1:45 PM
To: users@cloudstack.apache.org
Cc: dev@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is, Vrouter works as a dhcp server, and the template for vm is setup to dhcp mode When cs tries to create a vm, it picks up an available IP from the IP Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases below), the runtime exception "Does not support custom ip allocation at this time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original ip can be changed automatically by ExternalGuestNetworkGuru after the vm is stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each Pod, so the decision about which ip address to take happens after Allocators figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
RE: The IPaddr parameter for vmcreate API
Posted by Pranav Saxena <pr...@citrix.com>.
I think you are absolutely right ..that's how IP allocation works! Any issues ?
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Friday, April 26, 2013 1:45 PM
To: users@cloudstack.apache.org
Cc: dev@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is, Vrouter works as a dhcp server, and the template for vm is setup to dhcp mode When cs tries to create a vm, it picks up an available IP from the IP Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases below), the runtime exception "Does not support custom ip allocation at this time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original ip can be changed automatically by ExternalGuestNetworkGuru after the vm is stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each Pod, so the decision about which ip address to take happens after Allocators figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
答复: The IPaddr parameter for vmcreate API
Posted by Jerry Jiang <je...@tyxtech.com>.
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is,
Vrouter works as a dhcp server, and the template for vm is setup to dhcp
mode
When cs tries to create a vm, it picks up an available IP from the IP
Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in
following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases
below), the runtime exception "Does not support custom ip allocation at this
time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original
ip can be changed automatically by ExternalGuestNetworkGuru after the vm is
stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each
Pod, so the decision about which ip address to take happens after Allocators
figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best
extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of
parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not
what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
答复: The IPaddr parameter for vmcreate API
Posted by Jerry Jiang <je...@tyxtech.com>.
Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is,
Vrouter works as a dhcp server, and the template for vm is setup to dhcp
mode
When cs tries to create a vm, it picks up an available IP from the IP
Pool and assign it to targeted vm instance. Am I right?
Jerry
-----邮件原件-----
发件人: Pranav Saxena [mailto:pranav.saxena@citrix.com]
发送时间: 2013年4月22日 星期一 18:57
收件人: users@cloudstack.apache.org
抄送: dev@cloudstack.apache.org
主题: RE: The IPaddr parameter for vmcreate API
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in
following cases:
============================================================================
========
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of cases
below), the runtime exception "Does not support custom ip allocation at this
time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the original
ip can be changed automatically by ExternalGuestNetworkGuru after the vm is
stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per each
Pod, so the decision about which ip address to take happens after Allocators
figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best
extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of
parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not
what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
RE: The IPaddr parameter for vmcreate API
Posted by Pranav Saxena <pr...@citrix.com>.
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in
following cases:
====================================================================================
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of
cases below), the runtime exception "Does not support custom ip
allocation at this time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the
original ip can be changed automatically by ExternalGuestNetworkGuru
after the vm is stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per
each Pod, so the decision about which ip address to take happens after
Allocators figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry
RE: The IPaddr parameter for vmcreate API
Posted by Pranav Saxena <pr...@citrix.com>.
Hey Jerry,
Custom ip allocation failure leads to vm deploy failure. Happens in
following cases:
====================================================================================
* If ipAddress doesn't exist in the network.
* If requested ip address exists in the network, but already allocated.
* If network model doesn't support custom ip allocation (see list of
cases below), the runtime exception "Does not support custom ip
allocation at this time" is being thrown.
Custom ip allocation is SUPORTED FOR -
* Guest Virtual Network
* Direct network in Advanced zone
NOT SUPPORTED -
* ExternalFirewall setup case. The reason for not supporting: the
original ip can be changed automatically by ExternalGuestNetworkGuru
after the vm is stopped/started.
* Basic zone - as we have 1 Global Network, but separate ip ranges per
each Pod, so the decision about which ip address to take happens after
Allocators figure out the destination Pod.
If you specify the ip address of Pod2, and allocators will pick up Pod1
- the vm creation will fail.
So you can figure out which case might explain your problem to the best extent possible.
Thanks,
Pranav
-----Original Message-----
From: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
Sent: Monday, April 22, 2013 3:40 PM
To: users@cloudstack.apache.org
Subject: 答复: The IPaddr parameter for vmcreate API
Anyone has reponsed to the issue, thanks in advance.
jerry
发件人: Jerry Jiang [mailto:jerry.jiang@tyxtech.com]
发送时间: 2013年4月18日 星期四 10:29
收件人: 'users@cloudstack.apache.org'
主题: The IPaddr parameter for vmcreate API
Hello all,
I am using cloudstack API to create a VM instance. The IP address as one of parameters is provided to API
However, I found it didn’t work well, The IP address of creating VM is not what I provided for API.
Eg, using IP1 as the parameter, the vm operational IP addr is IP2
Why does this issue happen?
Thanks
Jerry