You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@tomcat.apache.org by Glenn Nielsen <gl...@mail.more.net> on 2003/05/12 16:57:17 UTC
mod_jk 1.2.3 source release ready for binary build/testing
The Windows/Unix incompatability problem for the Apache 2 version of mod_jk 1.2.3 should
now be resolved. I have also modified the hook priorities and tested them for Apache 2.0.
Both mod_alias and mod_dir are working the way they should.
Please build binaries for different platforms and test.
When a number of OS's/platforms have been built and tested successfully I will
announce this release.
New source distribution available at:
http://jakarta.apache.org/builds/jakarta-tomcat-connectors/jk/release/v1.2.3/src/
Regards,
Glenn
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-dev-help@jakarta.apache.org
Re: mod_jk 1.2.3 source release ready for binary build/testing
Posted by "Jess M. Holle" <je...@ptc.com>.
Jess M. Holle wrote:
> Henri Gomez wrote:
>
>> It works for me using the Apache provided Windows binaries (Apache
>> 2.0.45 and mod_jk 1.2.3 dll).
>
I've verified this issue with the stock Apache 2.0.45 binary for
Windows. The conf entries I used were:
LoadModule jk_module modules/mod_jk.dll
JkWorkersFile conf/workers.properties
JkLogFile logs/mod_jk.log
JkLogLevel error
JkMount /*.jsp ajp13
JkMount /*.jsp/* ajp13
Alias /MyName "D:/fullPathToDocBase"
I would be quite interested in knowing when this is fixed. Until then
I'll stick with mod_jk 1.2.2.
--
Jess Holle
> I've narrowed down the issue -- which for me is a showstopper.
>
> mod_jk 1.2.3 will not be invoked for when one does a configuration ala:
>
> LoadModule jk_module modules/mod_jk.dll
> JkMount /*.jsp ajp13
> ...
> Alias /Myname "D:/filePathToDocumentBase"
>
> Creates a test.jsp page at D:/filePathToDocumentBase/test.jsp ala:
>
> <% out.println( "hello world" ); %>
>
> and then attempts to invoke the JSP via the browser ala:
>
> http://fullyQualfiedHostname/Myname/test.jsp
>
> I'll duplicate this with the Apache 2.0.45 binary for Windows from
> Apache's distro site, but everything works absolutely fine in my case
> until I add the Alias directive (which works fine with mod_jk 1.2.3
> with Apache 1.3.27 and with mod_jk 1.2.2 with Apache 1.3.27 and 2.0.45).
>
> Perhaps the hook re-prioritization wasn't bulletproof?
Re: mod_jk 1.2.3 source release ready for binary build/testing
Posted by "Jess M. Holle" <je...@ptc.com>.
Henri Gomez wrote:
>> I built this on Windows against both Apache 1.3.27 and 2.0.45.
>>
>> It worked fine against 1.3.27 in my minimalistic testing.
>>
>> It did NOT seem to work at all in 2.0.45. Specifically, it loaded,
>> created an empty log file (despite the fact that I specified
>> JkLogLevel debug) and nothing more. The JkMount directive that
>> worked fine with the same Apache with mod_jk 1.2.2 (built in the same
>> fashion against the same Apache) resulted in me getting JSP source.
>>
>> I noticed the 2.0.45 binary for Windows on the site -- and it gave me
>> the same problem.
>
> It works for me using the Apache provided Windows binaries (Apache
> 2.0.45 and mod_jk 1.2.3 dll).
I've narrowed down the issue -- which for me is a showstopper.
mod_jk 1.2.3 will not be invoked for when one does a configuration ala:
LoadModule jk_module modules/mod_jk.dll
JkMount /*.jsp ajp13
...
Alias /Myname "D:/filePathToDocumentBase"
Creates a test.jsp page at D:/filePathToDocumentBase/test.jsp ala:
<% out.println( "hello world" ); %>
and then attempts to invoke the JSP via the browser ala:
http://fullyQualfiedHostname/Myname/test.jsp
I'll duplicate this with the Apache 2.0.45 binary for Windows from
Apache's distro site, but everything works absolutely fine in my case
until I add the Alias directive (which works fine with mod_jk 1.2.3 with
Apache 1.3.27 and with mod_jk 1.2.2 with Apache 1.3.27 and 2.0.45).
Perhaps the hook re-prioritization wasn't bulletproof?
--
Jess Holle
Re: mod_jk 1.2.3 source release ready for binary build/testing
Posted by Henri Gomez <hg...@apache.org>.
> I built this on Windows against both Apache 1.3.27 and 2.0.45.
>
> It worked fine against 1.3.27 in my minimalistic testing.
>
> It did NOT seem to work at all in 2.0.45. Specifically, it loaded,
> created an empty log file (despite the fact that I specified JkLogLevel
> debug) and nothing more. The JkMount directive that worked fine with
> the same Apache with mod_jk 1.2.2 (built in the same fashion against the
> same Apache) resulted in me getting JSP source.
>
> I noticed the 2.0.45 binary for Windows on the site -- and it gave me
> the same problem.
It works for me using the Apache provided Windows binaries (Apache
2.0.45 and mod_jk 1.2.3 dll).
> Anyone else see this problem? My relevant conf directives are:
>
> LoadModule jk_module modules/mod_jk.dll
>
> <IfModule mod_jk.c>
> JkWorkersFile conf/workers.properties
> JkLogFile logs/mod_jk.log
> JkLogLevel error
> JkMount /*.jsp ajp13
> JkMount /*.jsp/* ajp13
> </IfModule>
>
> and my relevant workers.properties entries are:
>
> worker.ajp13.port=8009
> worker.ajp13.host=localhost
> worker.ajp13.type=ajp13
> worker.ajp13.lbfactor=1
> worker.loadbalancer.type=lb
> worker.loadbalancer.balanced_workers=ajp13
>
> [I can attach the whole thing if it turns out to be relevant...]
>
> Note that these settings were essentially the same in the Apache 1.3.27
> test.
>
> [I was anxious to move to this release due to the issues supposedly
> fixed, but this is currently a non-starter as I need a single version
> for Apache 1.3.27 (on UNIX actually) and 2.0.45 on Windows.]
>
> --
> Jess Holle
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-dev-help@jakarta.apache.org
Re: mod_jk 1.2.3 source release ready for binary build/testing
Posted by Glenn Nielsen <gl...@mail.more.net>.
Please provide more information from your Apache httpd.conf and
your Tomcat server.xml so I can look into this further. Things
of interest are your Apache DocumentRoot, Host webapp DocBase,
Context configs, etc.
Thanks,
Glenn
Jess M. Holle wrote:
> Glenn Nielsen wrote:
>
>> The Windows/Unix incompatability problem for the Apache 2 version of
>> mod_jk 1.2.3 should
>> now be resolved. I have also modified the hook priorities and tested
>> them for Apache 2.0.
>> Both mod_alias and mod_dir are working the way they should.
>>
>> Please build binaries for different platforms and test.
>>
>> When a number of OS's/platforms have been built and tested
>> successfully I will
>> announce this release.
>
>
>> New source distribution available at:
>>
>> http://jakarta.apache.org/builds/jakarta-tomcat-connectors/jk/release/v1.2.3/src/
>>
>
>
> I built this on Windows against both Apache 1.3.27 and 2.0.45.
>
> It worked fine against 1.3.27 in my minimalistic testing.
>
> It did NOT seem to work at all in 2.0.45. Specifically, it loaded,
> created an empty log file (despite the fact that I specified JkLogLevel
> debug) and nothing more. The JkMount directive that worked fine with
> the same Apache with mod_jk 1.2.2 (built in the same fashion against the
> same Apache) resulted in me getting JSP source.
>
> I noticed the 2.0.45 binary for Windows on the site -- and it gave me
> the same problem.
>
> Anyone else see this problem? My relevant conf directives are:
>
> LoadModule jk_module modules/mod_jk.dll
>
> <IfModule mod_jk.c>
> JkWorkersFile conf/workers.properties
> JkLogFile logs/mod_jk.log
> JkLogLevel error
> JkMount /*.jsp ajp13
> JkMount /*.jsp/* ajp13
> </IfModule>
>
> and my relevant workers.properties entries are:
>
> worker.ajp13.port=8009
> worker.ajp13.host=localhost
> worker.ajp13.type=ajp13
> worker.ajp13.lbfactor=1
> worker.loadbalancer.type=lb
> worker.loadbalancer.balanced_workers=ajp13
>
> [I can attach the whole thing if it turns out to be relevant...]
>
> Note that these settings were essentially the same in the Apache 1.3.27
> test.
>
> [I was anxious to move to this release due to the issues supposedly
> fixed, but this is currently a non-starter as I need a single version
> for Apache 1.3.27 (on UNIX actually) and 2.0.45 on Windows.]
>
> --
> Jess Holle
>
>
--
----------------------------------------------------------------------
Glenn Nielsen glenn@more.net | /* Spelin donut madder |
MOREnet System Programming | * if iz ina coment. |
Missouri Research and Education Network | */ |
----------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-dev-help@jakarta.apache.org
Re: mod_jk 1.2.3 source release ready for binary build/testing
Posted by "Jess M. Holle" <je...@ptc.com>.
Glenn Nielsen wrote:
> The Windows/Unix incompatability problem for the Apache 2 version of
> mod_jk 1.2.3 should
> now be resolved. I have also modified the hook priorities and tested
> them for Apache 2.0.
> Both mod_alias and mod_dir are working the way they should.
>
> Please build binaries for different platforms and test.
>
> When a number of OS's/platforms have been built and tested
> successfully I will
> announce this release.
> New source distribution available at:
>
> http://jakarta.apache.org/builds/jakarta-tomcat-connectors/jk/release/v1.2.3/src/
I built this on Windows against both Apache 1.3.27 and 2.0.45.
It worked fine against 1.3.27 in my minimalistic testing.
It did NOT seem to work at all in 2.0.45. Specifically, it loaded,
created an empty log file (despite the fact that I specified JkLogLevel
debug) and nothing more. The JkMount directive that worked fine with
the same Apache with mod_jk 1.2.2 (built in the same fashion against the
same Apache) resulted in me getting JSP source.
I noticed the 2.0.45 binary for Windows on the site -- and it gave me
the same problem.
Anyone else see this problem? My relevant conf directives are:
LoadModule jk_module modules/mod_jk.dll
<IfModule mod_jk.c>
JkWorkersFile conf/workers.properties
JkLogFile logs/mod_jk.log
JkLogLevel error
JkMount /*.jsp ajp13
JkMount /*.jsp/* ajp13
</IfModule>
and my relevant workers.properties entries are:
worker.ajp13.port=8009
worker.ajp13.host=localhost
worker.ajp13.type=ajp13
worker.ajp13.lbfactor=1
worker.loadbalancer.type=lb
worker.loadbalancer.balanced_workers=ajp13
[I can attach the whole thing if it turns out to be relevant...]
Note that these settings were essentially the same in the Apache 1.3.27
test.
[I was anxious to move to this release due to the issues supposedly
fixed, but this is currently a non-starter as I need a single version
for Apache 1.3.27 (on UNIX actually) and 2.0.45 on Windows.]
--
Jess Holle
Re: mod_jk 1.2.3 source release ready for binary build/testing
Posted by Henri Gomez <hg...@apache.org>.
Henri Gomez wrote:
> Henri Gomez wrote:
>
>> Mladen Turk wrote:
>>
>>>> Please build binaries for different platforms and test.
>>
>>
>>
iSeries binaries uploaded (OS/400 V5R2) :
http://jakarta.apache.org/builds/jakarta-tomcat-connectors/jk/release/v1.2.3/bin/iseries/
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-dev-help@jakarta.apache.org
Re: mod_jk 1.2.3 source release ready for binary build/testing
Posted by Henri Gomez <hg...@apache.org>.
Henri Gomez wrote:
> Mladen Turk wrote:
>
>>> Please build binaries for different platforms and test.
>
>
> Linux versions are being built :
>
> - Apache 1.3.27 with/without eapi (Redhat 7.2)
>
> - Apache 2.0 (MPM) (Redhat 7.2)
>
> - Apache 2.0 (Redhat 9.0)
>
> - Apache 2.0 (Redhat 8.0)
>
Linux binaries for Redhat 7.2 and 9.0 uploaded :
http://jakarta.apache.org/builds/jakarta-tomcat-connectors/jk/release/v1.2.3/bin/linux/
rh72 indicate Redhat 7.2, rh9 indicate Redhat 9.0
Regards
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-dev-help@jakarta.apache.org
Re: mod_jk 1.2.3 source release ready for binary build/testing
Posted by Henri Gomez <hg...@apache.org>.
Mladen Turk wrote:
>>Please build binaries for different platforms and test.
Linux versions are being built :
- Apache 1.3.27 with/without eapi (Redhat 7.2)
- Apache 2.0 (MPM) (Redhat 7.2)
- Apache 2.0 (Redhat 9.0)
- Apache 2.0 (Redhat 8.0)
Stay tuned
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-dev-help@jakarta.apache.org
AW: mod_jk 1.2.3 source release ready for binary build/testing
Posted by Hans Schmid <Ha...@einsurance.de>.
Hi,
It now works for me on WINDOWS-XP SP1
Apache 2.0.45 with mod_jk_2.0.45.dll.
(even with logging ;)
Thanks,
Hans
> -----Ursprungliche Nachricht-----
> Von: Mladen Turk [mailto:mturk@apache.org]
> Gesendet: Mittwoch, 14. Mai 2003 10:32
> An: 'Tomcat Developers List'
> Betreff: RE: mod_jk 1.2.3 source release ready for binary build/testing
>
>
> >
> > Please build binaries for different platforms and test.
> >
>
> Builded, tested and uploaded to jakarta for WIN32.
>
> MT.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-dev-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-dev-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-dev-help@jakarta.apache.org
RE: mod_jk 1.2.3 source release ready for binary build/testing
Posted by Mladen Turk <mt...@apache.org>.
>
> Please build binaries for different platforms and test.
>
Builded, tested and uploaded to jakarta for WIN32.
MT.
---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-dev-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-dev-help@jakarta.apache.org