You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by ad...@apache.org on 2016/06/17 23:38:59 UTC
[14/63] [abbrv] [partial] incubator-mynewt-site git commit: remove
untarred files for openocd
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str7x.c
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str7x.c b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str7x.c
deleted file mode 100755
index d8a4cd4..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str7x.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * Copyright (C) 2008 by Spencer Oliver *
- * spen@spen-soft.co.uk *
- * *
- * Copyright (C) 2010 �yvind Harboe *
- * oyvind.harboe@zylin.com *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
- ***************************************************************************/
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "imp.h"
-#include <target/arm.h>
-#include <helper/binarybuffer.h>
-#include <target/algorithm.h>
-
-/* Flash registers */
-
-#define FLASH_CR0 0x00000000
-#define FLASH_CR1 0x00000004
-#define FLASH_DR0 0x00000008
-#define FLASH_DR1 0x0000000C
-#define FLASH_AR 0x00000010
-#define FLASH_ER 0x00000014
-#define FLASH_NVWPAR 0x0000DFB0
-#define FLASH_NVAPR0 0x0000DFB8
-#define FLASH_NVAPR1 0x0000DFBC
-
-/* FLASH_CR0 register bits */
-
-#define FLASH_WMS 0x80000000
-#define FLASH_SUSP 0x40000000
-#define FLASH_WPG 0x20000000
-#define FLASH_DWPG 0x10000000
-#define FLASH_SER 0x08000000
-#define FLASH_SPR 0x01000000
-#define FLASH_BER 0x04000000
-#define FLASH_MER 0x02000000
-#define FLASH_LOCK 0x00000010
-#define FLASH_BSYA1 0x00000004
-#define FLASH_BSYA0 0x00000002
-
-/* FLASH_CR1 register bits */
-
-#define FLASH_B1S 0x02000000
-#define FLASH_B0S 0x01000000
-#define FLASH_B1F1 0x00020000
-#define FLASH_B1F0 0x00010000
-#define FLASH_B0F7 0x00000080
-#define FLASH_B0F6 0x00000040
-#define FLASH_B0F5 0x00000020
-#define FLASH_B0F4 0x00000010
-#define FLASH_B0F3 0x00000008
-#define FLASH_B0F2 0x00000004
-#define FLASH_B0F1 0x00000002
-#define FLASH_B0F0 0x00000001
-
-/* FLASH_ER register bits */
-
-#define FLASH_WPF 0x00000100
-#define FLASH_RESER 0x00000080
-#define FLASH_SEQER 0x00000040
-#define FLASH_10ER 0x00000008
-#define FLASH_PGER 0x00000004
-#define FLASH_ERER 0x00000002
-#define FLASH_ERR 0x00000001
-
-
-struct str7x_flash_bank {
- uint32_t *sector_bits;
- uint32_t disable_bit;
- uint32_t busy_bits;
- uint32_t register_base;
-};
-
-struct str7x_mem_layout {
- uint32_t sector_start;
- uint32_t sector_size;
- uint32_t sector_bit;
-};
-
-enum str7x_status_codes {
- STR7X_CMD_SUCCESS = 0,
- STR7X_INVALID_COMMAND = 1,
- STR7X_SRC_ADDR_ERROR = 2,
- STR7X_DST_ADDR_ERROR = 3,
- STR7X_SRC_ADDR_NOT_MAPPED = 4,
- STR7X_DST_ADDR_NOT_MAPPED = 5,
- STR7X_COUNT_ERROR = 6,
- STR7X_INVALID_SECTOR = 7,
- STR7X_SECTOR_NOT_BLANK = 8,
- STR7X_SECTOR_NOT_PREPARED = 9,
- STR7X_COMPARE_ERROR = 10,
- STR7X_BUSY = 11
-};
-
-static const struct str7x_mem_layout mem_layout_str7bank0[] = {
- {0x00000000, 0x02000, 0x01},
- {0x00002000, 0x02000, 0x02},
- {0x00004000, 0x02000, 0x04},
- {0x00006000, 0x02000, 0x08},
- {0x00008000, 0x08000, 0x10},
- {0x00010000, 0x10000, 0x20},
- {0x00020000, 0x10000, 0x40},
- {0x00030000, 0x10000, 0x80}
-};
-
-static const struct str7x_mem_layout mem_layout_str7bank1[] = {
- {0x00000000, 0x02000, 0x10000},
- {0x00002000, 0x02000, 0x20000}
-};
-
-static int str7x_get_flash_adr(struct flash_bank *bank, uint32_t reg)
-{
- struct str7x_flash_bank *str7x_info = bank->driver_priv;
- return str7x_info->register_base | reg;
-}
-
-static int str7x_build_block_list(struct flash_bank *bank)
-{
- struct str7x_flash_bank *str7x_info = bank->driver_priv;
-
- int i;
- int num_sectors;
- int b0_sectors = 0, b1_sectors = 0;
-
- switch (bank->size) {
- case 16 * 1024:
- b1_sectors = 2;
- break;
- case 64 * 1024:
- b0_sectors = 5;
- break;
- case 128 * 1024:
- b0_sectors = 6;
- break;
- case 256 * 1024:
- b0_sectors = 8;
- break;
- default:
- LOG_ERROR("BUG: unknown bank->size encountered");
- exit(-1);
- }
-
- num_sectors = b0_sectors + b1_sectors;
-
- bank->num_sectors = num_sectors;
- bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
- str7x_info->sector_bits = malloc(sizeof(uint32_t) * num_sectors);
-
- num_sectors = 0;
-
- for (i = 0; i < b0_sectors; i++) {
- bank->sectors[num_sectors].offset = mem_layout_str7bank0[i].sector_start;
- bank->sectors[num_sectors].size = mem_layout_str7bank0[i].sector_size;
- bank->sectors[num_sectors].is_erased = -1;
- /* the reset_init handler marks all the sectors unprotected,
- * matching hardware after reset; keep the driver in sync
- */
- bank->sectors[num_sectors].is_protected = 0;
- str7x_info->sector_bits[num_sectors++] = mem_layout_str7bank0[i].sector_bit;
- }
-
- for (i = 0; i < b1_sectors; i++) {
- bank->sectors[num_sectors].offset = mem_layout_str7bank1[i].sector_start;
- bank->sectors[num_sectors].size = mem_layout_str7bank1[i].sector_size;
- bank->sectors[num_sectors].is_erased = -1;
- /* the reset_init handler marks all the sectors unprotected,
- * matching hardware after reset; keep the driver in sync
- */
- bank->sectors[num_sectors].is_protected = 0;
- str7x_info->sector_bits[num_sectors++] = mem_layout_str7bank1[i].sector_bit;
- }
-
- return ERROR_OK;
-}
-
-/* flash bank str7x <base> <size> 0 0 <target#> <str71_variant>
- */
-FLASH_BANK_COMMAND_HANDLER(str7x_flash_bank_command)
-{
- struct str7x_flash_bank *str7x_info;
-
- if (CMD_ARGC < 7)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- str7x_info = malloc(sizeof(struct str7x_flash_bank));
- bank->driver_priv = str7x_info;
-
- /* set default bits for str71x flash */
- str7x_info->busy_bits = (FLASH_LOCK | FLASH_BSYA1 | FLASH_BSYA0);
- str7x_info->disable_bit = (1 << 1);
-
- if (strcmp(CMD_ARGV[6], "STR71x") == 0)
- str7x_info->register_base = 0x40100000;
- else if (strcmp(CMD_ARGV[6], "STR73x") == 0) {
- str7x_info->register_base = 0x80100000;
- str7x_info->busy_bits = (FLASH_LOCK | FLASH_BSYA0);
- } else if (strcmp(CMD_ARGV[6], "STR75x") == 0) {
- str7x_info->register_base = 0x20100000;
- str7x_info->disable_bit = (1 << 0);
- } else {
- LOG_ERROR("unknown STR7x variant: '%s'", CMD_ARGV[6]);
- free(str7x_info);
- return ERROR_FLASH_BANK_INVALID;
- }
-
- str7x_build_block_list(bank);
-
- return ERROR_OK;
-}
-
-/* wait for flash to become idle or report errors.
-
- FIX!!! what's the maximum timeout??? The documentation doesn't
- state any maximum time.... by inspection it seems > 1000ms is to be
- expected.
-
- 10000ms is long enough that it should cover anything, yet not
- quite be equivalent to an infinite loop.
-
- */
-static int str7x_waitbusy(struct flash_bank *bank)
-{
- int err;
- int i;
- struct target *target = bank->target;
- struct str7x_flash_bank *str7x_info = bank->driver_priv;
-
- for (i = 0 ; i < 10000; i++) {
- uint32_t retval;
- err = target_read_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), &retval);
- if (err != ERROR_OK)
- return err;
-
- if ((retval & str7x_info->busy_bits) == 0)
- return ERROR_OK;
-
- alive_sleep(1);
- }
- LOG_ERROR("Timed out waiting for str7x flash");
- return ERROR_FAIL;
-}
-
-
-static int str7x_result(struct flash_bank *bank)
-{
- struct target *target = bank->target;
- uint32_t flash_flags;
-
- int retval;
- retval = target_read_u32(target, str7x_get_flash_adr(bank, FLASH_ER), &flash_flags);
- if (retval != ERROR_OK)
- return retval;
-
- if (flash_flags & FLASH_WPF) {
- LOG_ERROR("str7x hw write protection set");
- retval = ERROR_FAIL;
- }
- if (flash_flags & FLASH_RESER) {
- LOG_ERROR("str7x suspended program erase not resumed");
- retval = ERROR_FAIL;
- }
- if (flash_flags & FLASH_10ER) {
- LOG_ERROR("str7x trying to set bit to 1 when it is already 0");
- retval = ERROR_FAIL;
- }
- if (flash_flags & FLASH_PGER) {
- LOG_ERROR("str7x program error");
- retval = ERROR_FAIL;
- }
- if (flash_flags & FLASH_ERER) {
- LOG_ERROR("str7x erase error");
- retval = ERROR_FAIL;
- }
- if (retval == ERROR_OK) {
- if (flash_flags & FLASH_ERR) {
- /* this should always be set if one of the others are set... */
- LOG_ERROR("str7x write operation failed / bad setup");
- retval = ERROR_FAIL;
- }
- }
-
- return retval;
-}
-
-static int str7x_protect_check(struct flash_bank *bank)
-{
- struct str7x_flash_bank *str7x_info = bank->driver_priv;
- struct target *target = bank->target;
-
- int i;
- uint32_t flash_flags;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- int retval;
- retval = target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVWPAR), &flash_flags);
- if (retval != ERROR_OK)
- return retval;
-
- for (i = 0; i < bank->num_sectors; i++) {
- if (flash_flags & str7x_info->sector_bits[i])
- bank->sectors[i].is_protected = 0;
- else
- bank->sectors[i].is_protected = 1;
- }
-
- return ERROR_OK;
-}
-
-static int str7x_erase(struct flash_bank *bank, int first, int last)
-{
- struct str7x_flash_bank *str7x_info = bank->driver_priv;
- struct target *target = bank->target;
-
- int i;
- uint32_t cmd;
- uint32_t sectors = 0;
- int err;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- for (i = first; i <= last; i++)
- sectors |= str7x_info->sector_bits[i];
-
- LOG_DEBUG("sectors: 0x%" PRIx32 "", sectors);
-
- /* clear FLASH_ER register */
- err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
- if (err != ERROR_OK)
- return err;
-
- cmd = FLASH_SER;
- err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
- if (err != ERROR_OK)
- return err;
-
- cmd = sectors;
- err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR1), cmd);
- if (err != ERROR_OK)
- return err;
-
- cmd = FLASH_SER | FLASH_WMS;
- err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
- if (err != ERROR_OK)
- return err;
-
- err = str7x_waitbusy(bank);
- if (err != ERROR_OK)
- return err;
-
- err = str7x_result(bank);
- if (err != ERROR_OK)
- return err;
-
- for (i = first; i <= last; i++)
- bank->sectors[i].is_erased = 1;
-
- return ERROR_OK;
-}
-
-static int str7x_protect(struct flash_bank *bank, int set, int first, int last)
-{
- struct str7x_flash_bank *str7x_info = bank->driver_priv;
- struct target *target = bank->target;
- int i;
- uint32_t cmd;
- uint32_t protect_blocks;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- protect_blocks = 0xFFFFFFFF;
-
- if (set) {
- for (i = first; i <= last; i++)
- protect_blocks &= ~(str7x_info->sector_bits[i]);
- }
-
- /* clear FLASH_ER register */
- int err;
- err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
- if (err != ERROR_OK)
- return err;
-
- cmd = FLASH_SPR;
- err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
- if (err != ERROR_OK)
- return err;
-
- cmd = str7x_get_flash_adr(bank, FLASH_NVWPAR);
- err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), cmd);
- if (err != ERROR_OK)
- return err;
-
- cmd = protect_blocks;
- err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), cmd);
- if (err != ERROR_OK)
- return err;
-
- cmd = FLASH_SPR | FLASH_WMS;
- err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
- if (err != ERROR_OK)
- return err;
-
- err = str7x_waitbusy(bank);
- if (err != ERROR_OK)
- return err;
-
- err = str7x_result(bank);
- if (err != ERROR_OK)
- return err;
-
- return ERROR_OK;
-}
-
-static int str7x_write_block(struct flash_bank *bank, const uint8_t *buffer,
- uint32_t offset, uint32_t count)
-{
- struct str7x_flash_bank *str7x_info = bank->driver_priv;
- struct target *target = bank->target;
- uint32_t buffer_size = 32768;
- struct working_area *write_algorithm;
- struct working_area *source;
- uint32_t address = bank->base + offset;
- struct reg_param reg_params[6];
- struct arm_algorithm arm_algo;
- int retval = ERROR_OK;
-
- /* see contib/loaders/flash/str7x.s for src */
-
- static const uint32_t str7x_flash_write_code[] = {
- /* write: */
- 0xe3a04201, /* mov r4, #0x10000000 */
- 0xe5824000, /* str r4, [r2, #0x0] */
- 0xe5821010, /* str r1, [r2, #0x10] */
- 0xe4904004, /* ldr r4, [r0], #4 */
- 0xe5824008, /* str r4, [r2, #0x8] */
- 0xe4904004, /* ldr r4, [r0], #4 */
- 0xe582400c, /* str r4, [r2, #0xc] */
- 0xe3a04209, /* mov r4, #0x90000000 */
- 0xe5824000, /* str r4, [r2, #0x0] */
- /* busy: */
- 0xe5924000, /* ldr r4, [r2, #0x0] */
- 0xe1140005, /* tst r4, r5 */
- 0x1afffffc, /* bne busy */
- 0xe5924014, /* ldr r4, [r2, #0x14] */
- 0xe31400ff, /* tst r4, #0xff */
- 0x03140c01, /* tsteq r4, #0x100 */
- 0x1a000002, /* bne exit */
- 0xe2811008, /* add r1, r1, #0x8 */
- 0xe2533001, /* subs r3, r3, #1 */
- 0x1affffec, /* bne write */
- /* exit: */
- 0xeafffffe, /* b exit */
- };
-
- /* flash write code */
- if (target_alloc_working_area_try(target, sizeof(str7x_flash_write_code),
- &write_algorithm) != ERROR_OK) {
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- uint8_t code[sizeof(str7x_flash_write_code)];
- target_buffer_set_u32_array(target, code, ARRAY_SIZE(str7x_flash_write_code),
- str7x_flash_write_code);
- target_write_buffer(target, write_algorithm->address, sizeof(code), code);
-
- /* memory buffer */
- while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
- buffer_size /= 2;
- if (buffer_size <= 256) {
- /* we already allocated the writing code, but failed to get a
- * buffer, free the algorithm */
- target_free_working_area(target, write_algorithm);
-
- LOG_WARNING("no large enough working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- }
-
- arm_algo.common_magic = ARM_COMMON_MAGIC;
- arm_algo.core_mode = ARM_MODE_SVC;
- arm_algo.core_state = ARM_STATE_ARM;
-
- init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
- init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
- init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
- init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
- init_reg_param(®_params[4], "r4", 32, PARAM_IN);
- init_reg_param(®_params[5], "r5", 32, PARAM_OUT);
-
- while (count > 0) {
- uint32_t thisrun_count = (count > (buffer_size / 8)) ? (buffer_size / 8) : count;
-
- target_write_buffer(target, source->address, thisrun_count * 8, buffer);
-
- buf_set_u32(reg_params[0].value, 0, 32, source->address);
- buf_set_u32(reg_params[1].value, 0, 32, address);
- buf_set_u32(reg_params[2].value, 0, 32, str7x_get_flash_adr(bank, FLASH_CR0));
- buf_set_u32(reg_params[3].value, 0, 32, thisrun_count);
- buf_set_u32(reg_params[5].value, 0, 32, str7x_info->busy_bits);
-
- retval = target_run_algorithm(target, 0, NULL, 6, reg_params,
- write_algorithm->address,
- write_algorithm->address + (sizeof(str7x_flash_write_code) - 4),
- 10000, &arm_algo);
- if (retval != ERROR_OK)
- break;
-
- if (buf_get_u32(reg_params[4].value, 0, 32) != 0x00) {
- retval = str7x_result(bank);
- break;
- }
-
- buffer += thisrun_count * 8;
- address += thisrun_count * 8;
- count -= thisrun_count;
- }
-
- target_free_working_area(target, source);
- target_free_working_area(target, write_algorithm);
-
- destroy_reg_param(®_params[0]);
- destroy_reg_param(®_params[1]);
- destroy_reg_param(®_params[2]);
- destroy_reg_param(®_params[3]);
- destroy_reg_param(®_params[4]);
- destroy_reg_param(®_params[5]);
-
- return retval;
-}
-
-static int str7x_write(struct flash_bank *bank, const uint8_t *buffer,
- uint32_t offset, uint32_t count)
-{
- struct target *target = bank->target;
- uint32_t dwords_remaining = (count / 8);
- uint32_t bytes_remaining = (count & 0x00000007);
- uint32_t address = bank->base + offset;
- uint32_t bytes_written = 0;
- uint32_t cmd;
- int retval;
- uint32_t check_address = offset;
- int i;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (offset & 0x7) {
- LOG_WARNING("offset 0x%" PRIx32 " breaks required 8-byte alignment", offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- for (i = 0; i < bank->num_sectors; i++) {
- uint32_t sec_start = bank->sectors[i].offset;
- uint32_t sec_end = sec_start + bank->sectors[i].size;
-
- /* check if destination falls within the current sector */
- if ((check_address >= sec_start) && (check_address < sec_end)) {
- /* check if destination ends in the current sector */
- if (offset + count < sec_end)
- check_address = offset + count;
- else
- check_address = sec_end;
- }
- }
-
- if (check_address != offset + count)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- /* clear FLASH_ER register */
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
-
- /* multiple dwords (8-byte) to be programmed? */
- if (dwords_remaining > 0) {
- /* try using a block write */
- retval = str7x_write_block(bank, buffer, offset, dwords_remaining);
- if (retval != ERROR_OK) {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
- /* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
- LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
- } else {
- return retval;
- }
- } else {
- buffer += dwords_remaining * 8;
- address += dwords_remaining * 8;
- dwords_remaining = 0;
- }
- }
-
- while (dwords_remaining > 0) {
- /* command */
- cmd = FLASH_DWPG;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- /* address */
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), address);
-
- /* data word 1 */
- target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR0),
- 4, 1, buffer + bytes_written);
- bytes_written += 4;
-
- /* data word 2 */
- target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR1),
- 4, 1, buffer + bytes_written);
- bytes_written += 4;
-
- /* start programming cycle */
- cmd = FLASH_DWPG | FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- int err;
- err = str7x_waitbusy(bank);
- if (err != ERROR_OK)
- return err;
-
- err = str7x_result(bank);
- if (err != ERROR_OK)
- return err;
-
- dwords_remaining--;
- address += 8;
- }
-
- if (bytes_remaining) {
- uint8_t last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
- /* copy the last remaining bytes into the write buffer */
- memcpy(last_dword, buffer+bytes_written, bytes_remaining);
-
- /* command */
- cmd = FLASH_DWPG;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- /* address */
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), address);
-
- /* data word 1 */
- target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR0),
- 4, 1, last_dword);
-
- /* data word 2 */
- target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR1),
- 4, 1, last_dword + 4);
-
- /* start programming cycle */
- cmd = FLASH_DWPG | FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- int err;
- err = str7x_waitbusy(bank);
- if (err != ERROR_OK)
- return err;
-
- err = str7x_result(bank);
- if (err != ERROR_OK)
- return err;
- }
-
- return ERROR_OK;
-}
-
-static int str7x_probe(struct flash_bank *bank)
-{
- return ERROR_OK;
-}
-
-#if 0
-COMMAND_HANDLER(str7x_handle_part_id_command)
-{
- return ERROR_OK;
-}
-#endif
-
-static int get_str7x_info(struct flash_bank *bank, char *buf, int buf_size)
-{
- /* Setting the write protection on a sector is a permanent change but it
- * can be disabled temporarily. FLASH_NVWPAR reflects the permanent
- * protection state of the sectors, not the temporary.
- */
- snprintf(buf, buf_size, "STR7x flash protection info is only valid after a power cycle, "
- "clearing the protection is only temporary and may not be reflected in the current "
- "info returned.");
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str7x_handle_disable_jtag_command)
-{
- struct target *target = NULL;
- struct str7x_flash_bank *str7x_info = NULL;
-
- uint32_t flash_cmd;
- uint16_t ProtectionLevel = 0;
- uint16_t ProtectionRegs;
-
- if (CMD_ARGC < 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- str7x_info = bank->driver_priv;
-
- target = bank->target;
-
- if (target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* first we get protection status */
- uint32_t reg;
- target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR0), ®);
-
- if (!(reg & str7x_info->disable_bit))
- ProtectionLevel = 1;
-
- target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR1), ®);
- ProtectionRegs = ~(reg >> 16);
-
- while (((ProtectionRegs) != 0) && (ProtectionLevel < 16)) {
- ProtectionRegs >>= 1;
- ProtectionLevel++;
- }
-
- if (ProtectionLevel == 0) {
- flash_cmd = FLASH_SPR;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFB8);
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), 0xFFFFFFFD);
- flash_cmd = FLASH_SPR | FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
- } else {
- flash_cmd = FLASH_SPR;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFBC);
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0),
- ~(1 << (15 + ProtectionLevel)));
- flash_cmd = FLASH_SPR | FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
- }
-
- return ERROR_OK;
-}
-
-static const struct command_registration str7x_exec_command_handlers[] = {
- {
- .name = "disable_jtag",
- .usage = "<bank>",
- .handler = str7x_handle_disable_jtag_command,
- .mode = COMMAND_EXEC,
- .help = "disable jtag access",
- },
- COMMAND_REGISTRATION_DONE
-};
-
-static const struct command_registration str7x_command_handlers[] = {
- {
- .name = "str7x",
- .mode = COMMAND_ANY,
- .help = "str7x flash command group",
- .usage = "",
- .chain = str7x_exec_command_handlers,
- },
- COMMAND_REGISTRATION_DONE
-};
-
-struct flash_driver str7x_flash = {
- .name = "str7x",
- .commands = str7x_command_handlers,
- .flash_bank_command = str7x_flash_bank_command,
- .erase = str7x_erase,
- .protect = str7x_protect,
- .write = str7x_write,
- .read = default_flash_read,
- .probe = str7x_probe,
- .auto_probe = str7x_probe,
- .erase_check = default_flash_blank_check,
- .protect_check = str7x_protect_check,
- .info = get_str7x_info,
-};
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str9x.c
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str9x.c b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str9x.c
deleted file mode 100755
index b3f08b0..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str9x.c
+++ /dev/null
@@ -1,684 +0,0 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * Copyright (C) 2008 by Spencer Oliver *
- * spen@spen-soft.co.uk *
- *
- * Copyright (C) 2008 by Oyvind Harboe *
- * oyvind.harboe@zylin.com *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
- ***************************************************************************/
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "imp.h"
-#include <target/arm966e.h>
-#include <target/algorithm.h>
-
-/* Flash registers */
-
-#define FLASH_BBSR 0x54000000 /* Boot Bank Size Register */
-#define FLASH_NBBSR 0x54000004 /* Non-Boot Bank Size Register */
-#define FLASH_BBADR 0x5400000C /* Boot Bank Base Address Register */
-#define FLASH_NBBADR 0x54000010 /* Non-Boot Bank Base Address Register */
-#define FLASH_CR 0x54000018 /* Control Register */
-#define FLASH_SR 0x5400001C /* Status Register */
-#define FLASH_BCE5ADDR 0x54000020 /* BC Fifth Entry Target Address Register */
-
-struct str9x_flash_bank {
- uint32_t *sector_bits;
- int variant;
- int bank1;
-};
-
-enum str9x_status_codes {
- STR9X_CMD_SUCCESS = 0,
- STR9X_INVALID_COMMAND = 1,
- STR9X_SRC_ADDR_ERROR = 2,
- STR9X_DST_ADDR_ERROR = 3,
- STR9X_SRC_ADDR_NOT_MAPPED = 4,
- STR9X_DST_ADDR_NOT_MAPPED = 5,
- STR9X_COUNT_ERROR = 6,
- STR9X_INVALID_SECTOR = 7,
- STR9X_SECTOR_NOT_BLANK = 8,
- STR9X_SECTOR_NOT_PREPARED = 9,
- STR9X_COMPARE_ERROR = 10,
- STR9X_BUSY = 11
-};
-
-static uint32_t bank1start = 0x00080000;
-
-static int str9x_build_block_list(struct flash_bank *bank)
-{
- struct str9x_flash_bank *str9x_info = bank->driver_priv;
-
- int i;
- int num_sectors;
- int b0_sectors = 0, b1_sectors = 0;
- uint32_t offset = 0;
-
- /* set if we have large flash str9 */
- str9x_info->variant = 0;
- str9x_info->bank1 = 0;
-
- switch (bank->size) {
- case (256 * 1024):
- b0_sectors = 4;
- break;
- case (512 * 1024):
- b0_sectors = 8;
- break;
- case (1024 * 1024):
- bank1start = 0x00100000;
- str9x_info->variant = 1;
- b0_sectors = 16;
- break;
- case (2048 * 1024):
- bank1start = 0x00200000;
- str9x_info->variant = 1;
- b0_sectors = 32;
- break;
- case (128 * 1024):
- str9x_info->variant = 1;
- str9x_info->bank1 = 1;
- b1_sectors = 8;
- bank1start = bank->base;
- break;
- case (32 * 1024):
- str9x_info->bank1 = 1;
- b1_sectors = 4;
- bank1start = bank->base;
- break;
- default:
- LOG_ERROR("BUG: unknown bank->size encountered");
- exit(-1);
- }
-
- num_sectors = b0_sectors + b1_sectors;
-
- bank->num_sectors = num_sectors;
- bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
- str9x_info->sector_bits = malloc(sizeof(uint32_t) * num_sectors);
-
- num_sectors = 0;
-
- for (i = 0; i < b0_sectors; i++) {
- bank->sectors[num_sectors].offset = offset;
- bank->sectors[num_sectors].size = 0x10000;
- offset += bank->sectors[i].size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- str9x_info->sector_bits[num_sectors++] = (1 << i);
- }
-
- for (i = 0; i < b1_sectors; i++) {
- bank->sectors[num_sectors].offset = offset;
- bank->sectors[num_sectors].size = str9x_info->variant == 0 ? 0x2000 : 0x4000;
- offset += bank->sectors[i].size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- if (str9x_info->variant)
- str9x_info->sector_bits[num_sectors++] = (1 << i);
- else
- str9x_info->sector_bits[num_sectors++] = (1 << (i + 8));
- }
-
- return ERROR_OK;
-}
-
-/* flash bank str9x <base> <size> 0 0 <target#>
- */
-FLASH_BANK_COMMAND_HANDLER(str9x_flash_bank_command)
-{
- struct str9x_flash_bank *str9x_info;
-
- if (CMD_ARGC < 6)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- str9x_info = malloc(sizeof(struct str9x_flash_bank));
- bank->driver_priv = str9x_info;
-
- str9x_build_block_list(bank);
-
- return ERROR_OK;
-}
-
-static int str9x_protect_check(struct flash_bank *bank)
-{
- int retval;
- struct str9x_flash_bank *str9x_info = bank->driver_priv;
- struct target *target = bank->target;
-
- int i;
- uint32_t adr;
- uint32_t status = 0;
- uint16_t hstatus = 0;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* read level one protection */
-
- if (str9x_info->variant) {
- if (str9x_info->bank1) {
- adr = bank1start + 0x18;
- retval = target_write_u16(target, adr, 0x90);
- if (retval != ERROR_OK)
- return retval;
- retval = target_read_u16(target, adr, &hstatus);
- if (retval != ERROR_OK)
- return retval;
- status = hstatus;
- } else {
- adr = bank1start + 0x14;
- retval = target_write_u16(target, adr, 0x90);
- if (retval != ERROR_OK)
- return retval;
- retval = target_read_u32(target, adr, &status);
- if (retval != ERROR_OK)
- return retval;
- }
- } else {
- adr = bank1start + 0x10;
- retval = target_write_u16(target, adr, 0x90);
- if (retval != ERROR_OK)
- return retval;
- retval = target_read_u16(target, adr, &hstatus);
- if (retval != ERROR_OK)
- return retval;
- status = hstatus;
- }
-
- /* read array command */
- retval = target_write_u16(target, adr, 0xFF);
- if (retval != ERROR_OK)
- return retval;
-
- for (i = 0; i < bank->num_sectors; i++) {
- if (status & str9x_info->sector_bits[i])
- bank->sectors[i].is_protected = 1;
- else
- bank->sectors[i].is_protected = 0;
- }
-
- return ERROR_OK;
-}
-
-static int str9x_erase(struct flash_bank *bank, int first, int last)
-{
- struct target *target = bank->target;
- int i;
- uint32_t adr;
- uint8_t status;
- uint8_t erase_cmd;
- int total_timeout;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* Check if we can erase whole bank */
- if ((first == 0) && (last == (bank->num_sectors - 1))) {
- /* Optimize to run erase bank command instead of sector */
- erase_cmd = 0x80;
- /* Add timeout duration since erase bank takes more time */
- total_timeout = 1000 * bank->num_sectors;
- } else {
- /* Erase sector command */
- erase_cmd = 0x20;
- total_timeout = 1000;
- }
-
- /* this is so the compiler can *know* */
- assert(total_timeout > 0);
-
- for (i = first; i <= last; i++) {
- int retval;
- adr = bank->base + bank->sectors[i].offset;
-
- /* erase sectors or block */
- retval = target_write_u16(target, adr, erase_cmd);
- if (retval != ERROR_OK)
- return retval;
- retval = target_write_u16(target, adr, 0xD0);
- if (retval != ERROR_OK)
- return retval;
-
- /* get status */
- retval = target_write_u16(target, adr, 0x70);
- if (retval != ERROR_OK)
- return retval;
-
- int timeout;
- for (timeout = 0; timeout < total_timeout; timeout++) {
- retval = target_read_u8(target, adr, &status);
- if (retval != ERROR_OK)
- return retval;
- if (status & 0x80)
- break;
- alive_sleep(1);
- }
- if (timeout == total_timeout) {
- LOG_ERROR("erase timed out");
- return ERROR_FAIL;
- }
-
- /* clear status, also clear read array */
- retval = target_write_u16(target, adr, 0x50);
- if (retval != ERROR_OK)
- return retval;
-
- /* read array command */
- retval = target_write_u16(target, adr, 0xFF);
- if (retval != ERROR_OK)
- return retval;
-
- if (status & 0x22) {
- LOG_ERROR("error erasing flash bank, status: 0x%x", status);
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- /* If we ran erase bank command, we are finished */
- if (erase_cmd == 0x80)
- break;
- }
-
- for (i = first; i <= last; i++)
- bank->sectors[i].is_erased = 1;
-
- return ERROR_OK;
-}
-
-static int str9x_protect(struct flash_bank *bank,
- int set, int first, int last)
-{
- struct target *target = bank->target;
- int i;
- uint32_t adr;
- uint8_t status;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- for (i = first; i <= last; i++) {
- /* Level One Protection */
-
- adr = bank->base + bank->sectors[i].offset;
-
- target_write_u16(target, adr, 0x60);
- if (set)
- target_write_u16(target, adr, 0x01);
- else
- target_write_u16(target, adr, 0xD0);
-
- /* query status */
- target_read_u8(target, adr, &status);
-
- /* clear status, also clear read array */
- target_write_u16(target, adr, 0x50);
-
- /* read array command */
- target_write_u16(target, adr, 0xFF);
- }
-
- return ERROR_OK;
-}
-
-static int str9x_write_block(struct flash_bank *bank,
- const uint8_t *buffer, uint32_t offset, uint32_t count)
-{
- struct target *target = bank->target;
- uint32_t buffer_size = 32768;
- struct working_area *write_algorithm;
- struct working_area *source;
- uint32_t address = bank->base + offset;
- struct reg_param reg_params[4];
- struct arm_algorithm arm_algo;
- int retval = ERROR_OK;
-
- /* see contib/loaders/flash/str9x.s for src */
-
- static const uint32_t str9x_flash_write_code[] = {
- /* write: */
- 0xe3c14003, /* bic r4, r1, #3 */
- 0xe3a03040, /* mov r3, #0x40 */
- 0xe1c430b0, /* strh r3, [r4, #0] */
- 0xe0d030b2, /* ldrh r3, [r0], #2 */
- 0xe0c130b2, /* strh r3, [r1], #2 */
- 0xe3a03070, /* mov r3, #0x70 */
- 0xe1c430b0, /* strh r3, [r4, #0] */
- /* busy: */
- 0xe5d43000, /* ldrb r3, [r4, #0] */
- 0xe3130080, /* tst r3, #0x80 */
- 0x0afffffc, /* beq busy */
- 0xe3a05050, /* mov r5, #0x50 */
- 0xe1c450b0, /* strh r5, [r4, #0] */
- 0xe3a050ff, /* mov r5, #0xFF */
- 0xe1c450b0, /* strh r5, [r4, #0] */
- 0xe3130012, /* tst r3, #0x12 */
- 0x1a000001, /* bne exit */
- 0xe2522001, /* subs r2, r2, #1 */
- 0x1affffed, /* bne write */
- /* exit: */
- 0xe1200070, /* bkpt #0 */
- };
-
- /* flash write code */
- if (target_alloc_working_area(target, sizeof(str9x_flash_write_code),
- &write_algorithm) != ERROR_OK) {
- LOG_WARNING("no working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
-
- uint8_t code[sizeof(str9x_flash_write_code)];
- target_buffer_set_u32_array(target, code, ARRAY_SIZE(str9x_flash_write_code),
- str9x_flash_write_code);
- target_write_buffer(target, write_algorithm->address, sizeof(code), code);
-
- /* memory buffer */
- while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
- buffer_size /= 2;
- if (buffer_size <= 256) {
- /* we already allocated the writing code, but failed to get a
- * buffer, free the algorithm */
- target_free_working_area(target, write_algorithm);
-
- LOG_WARNING("no large enough working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- }
-
- arm_algo.common_magic = ARM_COMMON_MAGIC;
- arm_algo.core_mode = ARM_MODE_SVC;
- arm_algo.core_state = ARM_STATE_ARM;
-
- init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
- init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
- init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
- init_reg_param(®_params[3], "r3", 32, PARAM_IN);
-
- while (count > 0) {
- uint32_t thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
-
- target_write_buffer(target, source->address, thisrun_count * 2, buffer);
-
- buf_set_u32(reg_params[0].value, 0, 32, source->address);
- buf_set_u32(reg_params[1].value, 0, 32, address);
- buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
-
- retval = target_run_algorithm(target, 0, NULL, 4, reg_params,
- write_algorithm->address,
- 0, 10000, &arm_algo);
- if (retval != ERROR_OK) {
- LOG_ERROR("error executing str9x flash write algorithm");
- retval = ERROR_FLASH_OPERATION_FAILED;
- break;
- }
-
- if (buf_get_u32(reg_params[3].value, 0, 32) != 0x80) {
- retval = ERROR_FLASH_OPERATION_FAILED;
- break;
- }
-
- buffer += thisrun_count * 2;
- address += thisrun_count * 2;
- count -= thisrun_count;
- }
-
- target_free_working_area(target, source);
- target_free_working_area(target, write_algorithm);
-
- destroy_reg_param(®_params[0]);
- destroy_reg_param(®_params[1]);
- destroy_reg_param(®_params[2]);
- destroy_reg_param(®_params[3]);
-
- return retval;
-}
-
-static int str9x_write(struct flash_bank *bank,
- const uint8_t *buffer, uint32_t offset, uint32_t count)
-{
- struct target *target = bank->target;
- uint32_t words_remaining = (count / 2);
- uint32_t bytes_remaining = (count & 0x00000001);
- uint32_t address = bank->base + offset;
- uint32_t bytes_written = 0;
- uint8_t status;
- int retval;
- uint32_t check_address = offset;
- uint32_t bank_adr;
- int i;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (offset & 0x1) {
- LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- for (i = 0; i < bank->num_sectors; i++) {
- uint32_t sec_start = bank->sectors[i].offset;
- uint32_t sec_end = sec_start + bank->sectors[i].size;
-
- /* check if destination falls within the current sector */
- if ((check_address >= sec_start) && (check_address < sec_end)) {
- /* check if destination ends in the current sector */
- if (offset + count < sec_end)
- check_address = offset + count;
- else
- check_address = sec_end;
- }
- }
-
- if (check_address != offset + count)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- /* multiple half words (2-byte) to be programmed? */
- if (words_remaining > 0) {
- /* try using a block write */
- retval = str9x_write_block(bank, buffer, offset, words_remaining);
- if (retval != ERROR_OK) {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
- /* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
- LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
- } else if (retval == ERROR_FLASH_OPERATION_FAILED) {
- LOG_ERROR("flash writing failed");
- return ERROR_FLASH_OPERATION_FAILED;
- }
- } else {
- buffer += words_remaining * 2;
- address += words_remaining * 2;
- words_remaining = 0;
- }
- }
-
- while (words_remaining > 0) {
- bank_adr = address & ~0x03;
-
- /* write data command */
- target_write_u16(target, bank_adr, 0x40);
- target_write_memory(target, address, 2, 1, buffer + bytes_written);
-
- /* get status command */
- target_write_u16(target, bank_adr, 0x70);
-
- int timeout;
- for (timeout = 0; timeout < 1000; timeout++) {
- target_read_u8(target, bank_adr, &status);
- if (status & 0x80)
- break;
- alive_sleep(1);
- }
- if (timeout == 1000) {
- LOG_ERROR("write timed out");
- return ERROR_FAIL;
- }
-
- /* clear status reg and read array */
- target_write_u16(target, bank_adr, 0x50);
- target_write_u16(target, bank_adr, 0xFF);
-
- if (status & 0x10)
- return ERROR_FLASH_OPERATION_FAILED;
- else if (status & 0x02)
- return ERROR_FLASH_OPERATION_FAILED;
-
- bytes_written += 2;
- words_remaining--;
- address += 2;
- }
-
- if (bytes_remaining) {
- uint8_t last_halfword[2] = {0xff, 0xff};
-
- /* copy the last remaining bytes into the write buffer */
- memcpy(last_halfword, buffer+bytes_written, bytes_remaining);
-
- bank_adr = address & ~0x03;
-
- /* write data command */
- target_write_u16(target, bank_adr, 0x40);
- target_write_memory(target, address, 2, 1, last_halfword);
-
- /* query status command */
- target_write_u16(target, bank_adr, 0x70);
-
- int timeout;
- for (timeout = 0; timeout < 1000; timeout++) {
- target_read_u8(target, bank_adr, &status);
- if (status & 0x80)
- break;
- alive_sleep(1);
- }
- if (timeout == 1000) {
- LOG_ERROR("write timed out");
- return ERROR_FAIL;
- }
-
- /* clear status reg and read array */
- target_write_u16(target, bank_adr, 0x50);
- target_write_u16(target, bank_adr, 0xFF);
-
- if (status & 0x10)
- return ERROR_FLASH_OPERATION_FAILED;
- else if (status & 0x02)
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- return ERROR_OK;
-}
-
-static int str9x_probe(struct flash_bank *bank)
-{
- return ERROR_OK;
-}
-
-#if 0
-COMMAND_HANDLER(str9x_handle_part_id_command)
-{
- return ERROR_OK;
-}
-#endif
-
-COMMAND_HANDLER(str9x_handle_flash_config_command)
-{
- struct target *target = NULL;
-
- if (CMD_ARGC < 5)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- uint32_t bbsr, nbbsr, bbadr, nbbadr;
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], bbsr);
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], nbbsr);
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[3], bbadr);
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[4], nbbadr);
-
- target = bank->target;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* config flash controller */
- target_write_u32(target, FLASH_BBSR, bbsr);
- target_write_u32(target, FLASH_NBBSR, nbbsr);
- target_write_u32(target, FLASH_BBADR, bbadr >> 2);
- target_write_u32(target, FLASH_NBBADR, nbbadr >> 2);
-
- /* set bit 18 instruction TCM order as per flash programming manual */
- arm966e_write_cp15(target, 62, 0x40000);
-
- /* enable flash bank 1 */
- target_write_u32(target, FLASH_CR, 0x18);
- return ERROR_OK;
-}
-
-static const struct command_registration str9x_config_command_handlers[] = {
- {
- .name = "flash_config",
- .handler = str9x_handle_flash_config_command,
- .mode = COMMAND_EXEC,
- .help = "Configure str9x flash controller, prior to "
- "programming the flash.",
- .usage = "bank_id BBSR NBBSR BBADR NBBADR",
- },
- COMMAND_REGISTRATION_DONE
-};
-
-static const struct command_registration str9x_command_handlers[] = {
- {
- .name = "str9x",
- .mode = COMMAND_ANY,
- .help = "str9x flash command group",
- .usage = "",
- .chain = str9x_config_command_handlers,
- },
- COMMAND_REGISTRATION_DONE
-};
-
-struct flash_driver str9x_flash = {
- .name = "str9x",
- .commands = str9x_command_handlers,
- .flash_bank_command = str9x_flash_bank_command,
- .erase = str9x_erase,
- .protect = str9x_protect,
- .write = str9x_write,
- .read = default_flash_read,
- .probe = str9x_probe,
- .auto_probe = str9x_probe,
- .erase_check = default_flash_blank_check,
- .protect_check = str9x_protect_check,
-};
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/69f466b5/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str9xpec.c
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str9xpec.c b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str9xpec.c
deleted file mode 100755
index f0af53a..0000000
--- a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/flash/nor/str9xpec.c
+++ /dev/null
@@ -1,1212 +0,0 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * Copyright (C) 2008 by Spencer Oliver *
- * spen@spen-soft.co.uk *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
- ***************************************************************************/
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "imp.h"
-#include <target/arm7_9_common.h>
-
-/* ISC commands */
-
-#define ISC_IDCODE 0xFE
-#define ISC_MFG_READ 0x4C
-#define ISC_CONFIGURATION 0x07
-#define ISC_ENABLE 0x0C
-#define ISC_DISABLE 0x0F
-#define ISC_NOOP 0x10
-#define ISC_ADDRESS_SHIFT 0x11
-#define ISC_CLR_STATUS 0x13
-#define ISC_PROGRAM 0x20
-#define ISC_PROGRAM_SECURITY 0x22
-#define ISC_PROGRAM_UC 0x23
-#define ISC_ERASE 0x30
-#define ISC_READ 0x50
-#define ISC_BLANK_CHECK 0x60
-
-/* ISC_DEFAULT bit definitions */
-
-#define ISC_STATUS_SECURITY 0x40
-#define ISC_STATUS_INT_ERROR 0x30
-#define ISC_STATUS_MODE 0x08
-#define ISC_STATUS_BUSY 0x04
-#define ISC_STATUS_ERROR 0x03
-
-/* Option bytes definitions */
-
-#define STR9XPEC_OPT_CSMAPBIT 48
-#define STR9XPEC_OPT_LVDTHRESBIT 49
-#define STR9XPEC_OPT_LVDSELBIT 50
-#define STR9XPEC_OPT_LVDWARNBIT 51
-#define STR9XPEC_OPT_OTPBIT 63
-
-enum str9xpec_status_codes {
- STR9XPEC_INVALID_COMMAND = 1,
- STR9XPEC_ISC_SUCCESS = 2,
- STR9XPEC_ISC_DISABLED = 3,
- STR9XPEC_ISC_INTFAIL = 32,
-};
-
-struct str9xpec_flash_controller {
- struct jtag_tap *tap;
- uint32_t *sector_bits;
- int chain_pos;
- int isc_enable;
- uint8_t options[8];
-};
-
-static int str9xpec_erase_area(struct flash_bank *bank, int first, int last);
-static int str9xpec_set_address(struct flash_bank *bank, uint8_t sector);
-static int str9xpec_write_options(struct flash_bank *bank);
-
-static int str9xpec_set_instr(struct jtag_tap *tap, uint32_t new_instr, tap_state_t end_state)
-{
- if (tap == NULL)
- return ERROR_TARGET_INVALID;
-
- if (buf_get_u32(tap->cur_instr, 0, tap->ir_length) != new_instr) {
- struct scan_field field;
-
- field.num_bits = tap->ir_length;
- void *t = calloc(DIV_ROUND_UP(field.num_bits, 8), 1);
- field.out_value = t;
- buf_set_u32(t, 0, field.num_bits, new_instr);
- field.in_value = NULL;
-
- jtag_add_ir_scan(tap, &field, end_state);
-
- free(t);
- }
-
- return ERROR_OK;
-}
-
-static uint8_t str9xpec_isc_status(struct jtag_tap *tap)
-{
- struct scan_field field;
- uint8_t status;
-
- if (str9xpec_set_instr(tap, ISC_NOOP, TAP_IRPAUSE) != ERROR_OK)
- return ISC_STATUS_ERROR;
-
- field.num_bits = 8;
- field.out_value = NULL;
- field.in_value = &status;
-
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IDLE);
- jtag_execute_queue();
-
- LOG_DEBUG("status: 0x%2.2x", status);
-
- if (status & ISC_STATUS_SECURITY)
- LOG_INFO("Device Security Bit Set");
-
- return status;
-}
-
-static int str9xpec_isc_enable(struct flash_bank *bank)
-{
- uint8_t status;
- struct jtag_tap *tap;
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
-
- tap = str9xpec_info->tap;
-
- if (str9xpec_info->isc_enable)
- return ERROR_OK;
-
- /* enter isc mode */
- if (str9xpec_set_instr(tap, ISC_ENABLE, TAP_IDLE) != ERROR_OK)
- return ERROR_TARGET_INVALID;
-
- /* check ISC status */
- status = str9xpec_isc_status(tap);
- if (status & ISC_STATUS_MODE) {
- /* we have entered isc mode */
- str9xpec_info->isc_enable = 1;
- LOG_DEBUG("ISC_MODE Enabled");
- }
-
- return ERROR_OK;
-}
-
-static int str9xpec_isc_disable(struct flash_bank *bank)
-{
- uint8_t status;
- struct jtag_tap *tap;
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
-
- tap = str9xpec_info->tap;
-
- if (!str9xpec_info->isc_enable)
- return ERROR_OK;
-
- if (str9xpec_set_instr(tap, ISC_DISABLE, TAP_IDLE) != ERROR_OK)
- return ERROR_TARGET_INVALID;
-
- /* delay to handle aborts */
- jtag_add_sleep(50);
-
- /* check ISC status */
- status = str9xpec_isc_status(tap);
- if (!(status & ISC_STATUS_MODE)) {
- /* we have left isc mode */
- str9xpec_info->isc_enable = 0;
- LOG_DEBUG("ISC_MODE Disabled");
- }
-
- return ERROR_OK;
-}
-
-static int str9xpec_read_config(struct flash_bank *bank)
-{
- struct scan_field field;
- uint8_t status;
- struct jtag_tap *tap;
-
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
-
- tap = str9xpec_info->tap;
-
- LOG_DEBUG("ISC_CONFIGURATION");
-
- /* execute ISC_CONFIGURATION command */
- str9xpec_set_instr(tap, ISC_CONFIGURATION, TAP_IRPAUSE);
-
- field.num_bits = 64;
- field.out_value = NULL;
- field.in_value = str9xpec_info->options;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IDLE);
- jtag_execute_queue();
-
- status = str9xpec_isc_status(tap);
-
- return status;
-}
-
-static int str9xpec_build_block_list(struct flash_bank *bank)
-{
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
-
- int i;
- int num_sectors;
- int b0_sectors = 0, b1_sectors = 0;
- uint32_t offset = 0;
- int b1_size = 0x2000;
-
- switch (bank->size) {
- case (256 * 1024):
- b0_sectors = 4;
- break;
- case (512 * 1024):
- b0_sectors = 8;
- break;
- case (1024 * 1024):
- b0_sectors = 16;
- break;
- case (2048 * 1024):
- b0_sectors = 32;
- break;
- case (128 * 1024):
- b1_size = 0x4000;
- b1_sectors = 8;
- break;
- case (32 * 1024):
- b1_sectors = 4;
- break;
- default:
- LOG_ERROR("BUG: unknown bank->size encountered");
- exit(-1);
- }
-
- num_sectors = b0_sectors + b1_sectors;
-
- bank->num_sectors = num_sectors;
- bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
- str9xpec_info->sector_bits = malloc(sizeof(uint32_t) * num_sectors);
-
- num_sectors = 0;
-
- for (i = 0; i < b0_sectors; i++) {
- bank->sectors[num_sectors].offset = offset;
- bank->sectors[num_sectors].size = 0x10000;
- offset += bank->sectors[i].size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- str9xpec_info->sector_bits[num_sectors++] = i;
- }
-
- for (i = 0; i < b1_sectors; i++) {
- bank->sectors[num_sectors].offset = offset;
- bank->sectors[num_sectors].size = b1_size;
- offset += bank->sectors[i].size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- str9xpec_info->sector_bits[num_sectors++] = i + 32;
- }
-
- return ERROR_OK;
-}
-
-/* flash bank str9x <base> <size> 0 0 <target#>
- */
-FLASH_BANK_COMMAND_HANDLER(str9xpec_flash_bank_command)
-{
- struct str9xpec_flash_controller *str9xpec_info;
- struct arm *arm = NULL;
- struct arm7_9_common *arm7_9 = NULL;
- struct arm_jtag *jtag_info = NULL;
-
- if (CMD_ARGC < 6)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- str9xpec_info = malloc(sizeof(struct str9xpec_flash_controller));
- bank->driver_priv = str9xpec_info;
-
- /* REVISIT verify that the jtag position of flash controller is
- * right after *THIS* core, which must be a STR9xx core ...
- */
- arm = bank->target->arch_info;
- arm7_9 = arm->arch_info;
- jtag_info = &arm7_9->jtag_info;
-
- /* The core is the next tap after the flash controller in the chain */
- str9xpec_info->tap = jtag_tap_by_position(jtag_info->tap->abs_chain_position - 1);
- str9xpec_info->isc_enable = 0;
-
- str9xpec_build_block_list(bank);
-
- /* clear option byte register */
- buf_set_u32(str9xpec_info->options, 0, 64, 0);
-
- return ERROR_OK;
-}
-
-static int str9xpec_blank_check(struct flash_bank *bank, int first, int last)
-{
- struct scan_field field;
- uint8_t status;
- struct jtag_tap *tap;
- int i;
- uint8_t *buffer = NULL;
-
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
-
- tap = str9xpec_info->tap;
-
- if (!str9xpec_info->isc_enable)
- str9xpec_isc_enable(bank);
-
- if (!str9xpec_info->isc_enable)
- return ERROR_FLASH_OPERATION_FAILED;
-
- buffer = calloc(DIV_ROUND_UP(64, 8), 1);
-
- LOG_DEBUG("blank check: first_bank: %i, last_bank: %i", first, last);
-
- for (i = first; i <= last; i++)
- buf_set_u32(buffer, str9xpec_info->sector_bits[i], 1, 1);
-
- /* execute ISC_BLANK_CHECK command */
- str9xpec_set_instr(tap, ISC_BLANK_CHECK, TAP_IRPAUSE);
-
- field.num_bits = 64;
- field.out_value = buffer;
- field.in_value = NULL;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IDLE);
- jtag_add_sleep(40000);
-
- /* read blank check result */
- field.num_bits = 64;
- field.out_value = NULL;
- field.in_value = buffer;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IRPAUSE);
- jtag_execute_queue();
-
- status = str9xpec_isc_status(tap);
-
- for (i = first; i <= last; i++) {
- if (buf_get_u32(buffer, str9xpec_info->sector_bits[i], 1))
- bank->sectors[i].is_erased = 0;
- else
- bank->sectors[i].is_erased = 1;
- }
-
- free(buffer);
-
- str9xpec_isc_disable(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
- return ERROR_OK;
-}
-
-static int str9xpec_protect_check(struct flash_bank *bank)
-{
- uint8_t status;
- int i;
-
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
-
- status = str9xpec_read_config(bank);
-
- for (i = 0; i < bank->num_sectors; i++) {
- if (buf_get_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1))
- bank->sectors[i].is_protected = 1;
- else
- bank->sectors[i].is_protected = 0;
- }
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
- return ERROR_OK;
-}
-
-static int str9xpec_erase_area(struct flash_bank *bank, int first, int last)
-{
- struct scan_field field;
- uint8_t status;
- struct jtag_tap *tap;
- int i;
- uint8_t *buffer = NULL;
-
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
-
- tap = str9xpec_info->tap;
-
- if (!str9xpec_info->isc_enable)
- str9xpec_isc_enable(bank);
-
- if (!str9xpec_info->isc_enable)
- return ISC_STATUS_ERROR;
-
- buffer = calloc(DIV_ROUND_UP(64, 8), 1);
-
- LOG_DEBUG("erase: first_bank: %i, last_bank: %i", first, last);
-
- /* last bank: 0xFF signals a full erase (unlock complete device) */
- /* last bank: 0xFE signals a option byte erase */
- if (last == 0xFF) {
- for (i = 0; i < 64; i++)
- buf_set_u32(buffer, i, 1, 1);
- } else if (last == 0xFE)
- buf_set_u32(buffer, 49, 1, 1);
- else {
- for (i = first; i <= last; i++)
- buf_set_u32(buffer, str9xpec_info->sector_bits[i], 1, 1);
- }
-
- LOG_DEBUG("ISC_ERASE");
-
- /* execute ISC_ERASE command */
- str9xpec_set_instr(tap, ISC_ERASE, TAP_IRPAUSE);
-
- field.num_bits = 64;
- field.out_value = buffer;
- field.in_value = NULL;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IDLE);
- jtag_execute_queue();
-
- jtag_add_sleep(10);
-
- /* wait for erase completion */
- while (!((status = str9xpec_isc_status(tap)) & ISC_STATUS_BUSY))
- alive_sleep(1);
-
- free(buffer);
-
- str9xpec_isc_disable(bank);
-
- return status;
-}
-
-static int str9xpec_erase(struct flash_bank *bank, int first, int last)
-{
- int status;
-
- status = str9xpec_erase_area(bank, first, last);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- return ERROR_OK;
-}
-
-static int str9xpec_lock_device(struct flash_bank *bank)
-{
- struct scan_field field;
- uint8_t status;
- struct jtag_tap *tap;
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- str9xpec_info = bank->driver_priv;
- tap = str9xpec_info->tap;
-
- if (!str9xpec_info->isc_enable)
- str9xpec_isc_enable(bank);
-
- if (!str9xpec_info->isc_enable)
- return ISC_STATUS_ERROR;
-
- /* set security address */
- str9xpec_set_address(bank, 0x80);
-
- /* execute ISC_PROGRAM command */
- str9xpec_set_instr(tap, ISC_PROGRAM_SECURITY, TAP_IDLE);
-
- str9xpec_set_instr(tap, ISC_NOOP, TAP_IRPAUSE);
-
- do {
- field.num_bits = 8;
- field.out_value = NULL;
- field.in_value = &status;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IDLE);
- jtag_execute_queue();
-
- } while (!(status & ISC_STATUS_BUSY));
-
- str9xpec_isc_disable(bank);
-
- return status;
-}
-
-static int str9xpec_unlock_device(struct flash_bank *bank)
-{
- uint8_t status;
-
- status = str9xpec_erase_area(bank, 0, 255);
-
- return status;
-}
-
-static int str9xpec_protect(struct flash_bank *bank, int set, int first, int last)
-{
- uint8_t status;
- int i;
-
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
-
- status = str9xpec_read_config(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- LOG_DEBUG("protect: first_bank: %i, last_bank: %i", first, last);
-
- /* last bank: 0xFF signals a full device protect */
- if (last == 0xFF) {
- if (set)
- status = str9xpec_lock_device(bank);
- else {
- /* perform full erase to unlock device */
- status = str9xpec_unlock_device(bank);
- }
- } else {
- for (i = first; i <= last; i++) {
- if (set)
- buf_set_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1, 1);
- else
- buf_set_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1, 0);
- }
-
- status = str9xpec_write_options(bank);
- }
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- return ERROR_OK;
-}
-
-static int str9xpec_set_address(struct flash_bank *bank, uint8_t sector)
-{
- struct jtag_tap *tap;
- struct scan_field field;
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
-
- tap = str9xpec_info->tap;
-
- /* set flash controller address */
- str9xpec_set_instr(tap, ISC_ADDRESS_SHIFT, TAP_IRPAUSE);
-
- field.num_bits = 8;
- field.out_value = §or;
- field.in_value = NULL;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IRPAUSE);
-
- return ERROR_OK;
-}
-
-static int str9xpec_write(struct flash_bank *bank, const uint8_t *buffer,
- uint32_t offset, uint32_t count)
-{
- struct str9xpec_flash_controller *str9xpec_info = bank->driver_priv;
- uint32_t dwords_remaining = (count / 8);
- uint32_t bytes_remaining = (count & 0x00000007);
- uint32_t bytes_written = 0;
- uint8_t status;
- uint32_t check_address = offset;
- struct jtag_tap *tap;
- struct scan_field field;
- uint8_t *scanbuf;
- int i;
- int first_sector = 0;
- int last_sector = 0;
-
- tap = str9xpec_info->tap;
-
- if (!str9xpec_info->isc_enable)
- str9xpec_isc_enable(bank);
-
- if (!str9xpec_info->isc_enable)
- return ERROR_FLASH_OPERATION_FAILED;
-
- if (offset & 0x7) {
- LOG_WARNING("offset 0x%" PRIx32 " breaks required 8-byte alignment", offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- for (i = 0; i < bank->num_sectors; i++) {
- uint32_t sec_start = bank->sectors[i].offset;
- uint32_t sec_end = sec_start + bank->sectors[i].size;
-
- /* check if destination falls within the current sector */
- if ((check_address >= sec_start) && (check_address < sec_end)) {
- /* check if destination ends in the current sector */
- if (offset + count < sec_end)
- check_address = offset + count;
- else
- check_address = sec_end;
- }
-
- if ((offset >= sec_start) && (offset < sec_end))
- first_sector = i;
-
- if ((offset + count >= sec_start) && (offset + count < sec_end))
- last_sector = i;
- }
-
- if (check_address != offset + count)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- LOG_DEBUG("first_sector: %i, last_sector: %i", first_sector, last_sector);
-
- scanbuf = calloc(DIV_ROUND_UP(64, 8), 1);
-
- LOG_DEBUG("ISC_PROGRAM");
-
- for (i = first_sector; i <= last_sector; i++) {
- str9xpec_set_address(bank, str9xpec_info->sector_bits[i]);
-
- dwords_remaining = dwords_remaining < (bank->sectors[i].size/8)
- ? dwords_remaining : (bank->sectors[i].size/8);
-
- while (dwords_remaining > 0) {
- str9xpec_set_instr(tap, ISC_PROGRAM, TAP_IRPAUSE);
-
- field.num_bits = 64;
- field.out_value = (buffer + bytes_written);
- field.in_value = NULL;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IDLE);
-
- /* small delay before polling */
- jtag_add_sleep(50);
-
- str9xpec_set_instr(tap, ISC_NOOP, TAP_IRPAUSE);
-
- do {
- field.num_bits = 8;
- field.out_value = NULL;
- field.in_value = scanbuf;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IRPAUSE);
- jtag_execute_queue();
-
- status = buf_get_u32(scanbuf, 0, 8);
-
- } while (!(status & ISC_STATUS_BUSY));
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* if ((status & ISC_STATUS_INT_ERROR) != STR9XPEC_ISC_INTFAIL)
- return ERROR_FLASH_OPERATION_FAILED; */
-
- dwords_remaining--;
- bytes_written += 8;
- }
- }
-
- if (bytes_remaining) {
- uint8_t last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
- /* copy the last remaining bytes into the write buffer */
- memcpy(last_dword, buffer+bytes_written, bytes_remaining);
-
- str9xpec_set_instr(tap, ISC_PROGRAM, TAP_IRPAUSE);
-
- field.num_bits = 64;
- field.out_value = last_dword;
- field.in_value = NULL;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IDLE);
-
- /* small delay before polling */
- jtag_add_sleep(50);
-
- str9xpec_set_instr(tap, ISC_NOOP, TAP_IRPAUSE);
-
- do {
- field.num_bits = 8;
- field.out_value = NULL;
- field.in_value = scanbuf;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IRPAUSE);
- jtag_execute_queue();
-
- status = buf_get_u32(scanbuf, 0, 8);
-
- } while (!(status & ISC_STATUS_BUSY));
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* if ((status & ISC_STATUS_INT_ERROR) != STR9XPEC_ISC_INTFAIL)
- return ERROR_FLASH_OPERATION_FAILED; */
- }
-
- free(scanbuf);
-
- str9xpec_isc_disable(bank);
-
- return ERROR_OK;
-}
-
-static int str9xpec_probe(struct flash_bank *bank)
-{
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str9xpec_handle_part_id_command)
-{
- struct scan_field field;
- uint8_t *buffer = NULL;
- struct jtag_tap *tap;
- uint32_t idcode;
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- if (CMD_ARGC < 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- str9xpec_info = bank->driver_priv;
- tap = str9xpec_info->tap;
-
- buffer = calloc(DIV_ROUND_UP(32, 8), 1);
-
- str9xpec_set_instr(tap, ISC_IDCODE, TAP_IRPAUSE);
-
- field.num_bits = 32;
- field.out_value = NULL;
- field.in_value = buffer;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IDLE);
- jtag_execute_queue();
-
- idcode = buf_get_u32(buffer, 0, 32);
-
- command_print(CMD_CTX, "str9xpec part id: 0x%8.8" PRIx32 "", idcode);
-
- free(buffer);
-
- return ERROR_OK;
-}
-
-static int str9xpec_erase_check(struct flash_bank *bank)
-{
- return str9xpec_blank_check(bank, 0, bank->num_sectors - 1);
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_options_read_command)
-{
- uint8_t status;
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- if (CMD_ARGC < 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- str9xpec_info = bank->driver_priv;
-
- status = str9xpec_read_config(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* boot bank */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1))
- command_print(CMD_CTX, "CS Map: bank1");
- else
- command_print(CMD_CTX, "CS Map: bank0");
-
- /* OTP lock */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_OTPBIT, 1))
- command_print(CMD_CTX, "OTP Lock: OTP Locked");
- else
- command_print(CMD_CTX, "OTP Lock: OTP Unlocked");
-
- /* LVD Threshold */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1))
- command_print(CMD_CTX, "LVD Threshold: 2.7v");
- else
- command_print(CMD_CTX, "LVD Threshold: 2.4v");
-
- /* LVD reset warning */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1))
- command_print(CMD_CTX, "LVD Reset Warning: VDD or VDDQ Inputs");
- else
- command_print(CMD_CTX, "LVD Reset Warning: VDD Input Only");
-
- /* LVD reset select */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1))
- command_print(CMD_CTX, "LVD Reset Selection: VDD or VDDQ Inputs");
- else
- command_print(CMD_CTX, "LVD Reset Selection: VDD Input Only");
-
- return ERROR_OK;
-}
-
-static int str9xpec_write_options(struct flash_bank *bank)
-{
- struct scan_field field;
- uint8_t status;
- struct jtag_tap *tap;
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- str9xpec_info = bank->driver_priv;
- tap = str9xpec_info->tap;
-
- /* erase config options first */
- status = str9xpec_erase_area(bank, 0xFE, 0xFE);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return status;
-
- if (!str9xpec_info->isc_enable)
- str9xpec_isc_enable(bank);
-
- if (!str9xpec_info->isc_enable)
- return ISC_STATUS_ERROR;
-
- /* according to data 64th bit has to be set */
- buf_set_u32(str9xpec_info->options, 63, 1, 1);
-
- /* set option byte address */
- str9xpec_set_address(bank, 0x50);
-
- /* execute ISC_PROGRAM command */
- str9xpec_set_instr(tap, ISC_PROGRAM, TAP_IRPAUSE);
-
- field.num_bits = 64;
- field.out_value = str9xpec_info->options;
- field.in_value = NULL;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IDLE);
-
- /* small delay before polling */
- jtag_add_sleep(50);
-
- str9xpec_set_instr(tap, ISC_NOOP, TAP_IRPAUSE);
-
- do {
- field.num_bits = 8;
- field.out_value = NULL;
- field.in_value = &status;
-
- jtag_add_dr_scan(tap, 1, &field, TAP_IRPAUSE);
- jtag_execute_queue();
-
- } while (!(status & ISC_STATUS_BUSY));
-
- str9xpec_isc_disable(bank);
-
- return status;
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_options_write_command)
-{
- uint8_t status;
-
- if (CMD_ARGC < 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- status = str9xpec_write_options(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- command_print(CMD_CTX, "str9xpec write options complete.\n"
- "INFO: a reset or power cycle is required "
- "for the new settings to take effect.");
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_options_cmap_command)
-{
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- if (CMD_ARGC < 2)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- str9xpec_info = bank->driver_priv;
-
- if (strcmp(CMD_ARGV[1], "bank1") == 0)
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1, 1);
- else
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1, 0);
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_options_lvdthd_command)
-{
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- if (CMD_ARGC < 2)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- str9xpec_info = bank->driver_priv;
-
- if (strcmp(CMD_ARGV[1], "2.7v") == 0)
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1, 1);
- else
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1, 0);
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_options_lvdsel_command)
-{
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- if (CMD_ARGC < 2)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- str9xpec_info = bank->driver_priv;
-
- if (strcmp(CMD_ARGV[1], "vdd_vddq") == 0)
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1, 1);
- else
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1, 0);
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_options_lvdwarn_command)
-{
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- if (CMD_ARGC < 2)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- str9xpec_info = bank->driver_priv;
-
- if (strcmp(CMD_ARGV[1], "vdd_vddq") == 0)
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1, 1);
- else
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1, 0);
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_lock_command)
-{
- uint8_t status;
-
- if (CMD_ARGC < 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- status = str9xpec_lock_device(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_unlock_command)
-{
- uint8_t status;
-
- if (CMD_ARGC < 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- status = str9xpec_unlock_device(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- command_print(CMD_CTX, "str9xpec unlocked.\n"
- "INFO: a reset or power cycle is required "
- "for the new settings to take effect.");
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_enable_turbo_command)
-{
- struct jtag_tap *tap0;
- struct jtag_tap *tap1;
- struct jtag_tap *tap2;
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- if (CMD_ARGC < 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- str9xpec_info = bank->driver_priv;
-
- /* remove arm core from chain - enter turbo mode */
- tap0 = str9xpec_info->tap;
- if (tap0 == NULL) {
- /* things are *WRONG* */
- command_print(CMD_CTX, "**STR9FLASH** (tap0) invalid chain?");
- return ERROR_FAIL;
- }
- tap1 = tap0->next_tap;
- if (tap1 == NULL) {
- /* things are *WRONG* */
- command_print(CMD_CTX, "**STR9FLASH** (tap1) invalid chain?");
- return ERROR_FAIL;
- }
- tap2 = tap1->next_tap;
- if (tap2 == NULL) {
- /* things are *WRONG* */
- command_print(CMD_CTX, "**STR9FLASH** (tap2) invalid chain?");
- return ERROR_FAIL;
- }
-
- /* enable turbo mode - TURBO-PROG-ENABLE */
- str9xpec_set_instr(tap2, 0xD, TAP_IDLE);
- retval = jtag_execute_queue();
- if (retval != ERROR_OK)
- return retval;
-
- /* modify scan chain - str9 core has been removed */
- tap1->enabled = 0;
-
- return ERROR_OK;
-}
-
-COMMAND_HANDLER(str9xpec_handle_flash_disable_turbo_command)
-{
- struct jtag_tap *tap;
- struct str9xpec_flash_controller *str9xpec_info = NULL;
-
- if (CMD_ARGC < 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- struct flash_bank *bank;
- int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
- return retval;
-
- str9xpec_info = bank->driver_priv;
- tap = str9xpec_info->tap;
-
- if (tap == NULL)
- return ERROR_FAIL;
-
- /* exit turbo mode via RESET */
- str9xpec_set_instr(tap, ISC_NOOP, TAP_IDLE);
- jtag_add_tlr();
- jtag_execute_queue();
-
- /* restore previous scan chain */
- if (tap->next_tap)
- tap->next_tap->enabled = 1;
-
- return ERROR_OK;
-}
-
-static const struct command_registration str9xpec_config_command_handlers[] = {
- {
- .name = "enable_turbo",
- .usage = "<bank>",
- .handler = str9xpec_handle_flash_enable_turbo_command,
- .mode = COMMAND_EXEC,
- .help = "enable str9xpec turbo mode",
- },
- {
- .name = "disable_turbo",
- .usage = "<bank>",
- .handler = str9xpec_handle_flash_disable_turbo_command,
- .mode = COMMAND_EXEC,
- .help = "disable str9xpec turbo mode",
- },
- {
- .name = "options_cmap",
- .usage = "<bank> <bank0 | bank1>",
- .handler = str9xpec_handle_flash_options_cmap_command,
- .mode = COMMAND_EXEC,
- .help = "configure str9xpec boot sector",
- },
- {
- .name = "options_lvdthd",
- .usage = "<bank> <2.4v | 2.7v>",
- .handler = str9xpec_handle_flash_options_lvdthd_command,
- .mode = COMMAND_EXEC,
- .help = "configure str9xpec lvd threshold",
- },
- {
- .name = "options_lvdsel",
- .usage = "<bank> <vdd | vdd_vddq>",
- .handler = str9xpec_handle_flash_options_lvdsel_command,
- .mode = COMMAND_EXEC,
- .help = "configure str9xpec lvd selection",
- },
- {
- .name = "options_lvdwarn",
- .usage = "<bank> <vdd | vdd_vddq>",
- .handler = str9xpec_handle_flash_options_lvdwarn_command,
- .mode = COMMAND_EXEC,
- .help = "configure str9xpec lvd warning",
- },
- {
- .name = "options_read",
- .usage = "<bank>",
- .handler = str9xpec_handle_flash_options_read_command,
- .mode = COMMAND_EXEC,
- .help = "read str9xpec options",
- },
- {
- .name = "options_write",
- .usage = "<bank>",
- .handler = str9xpec_handle_flash_options_write_command,
- .mode = COMMAND_EXEC,
- .help = "write str9xpec options",
- },
- {
- .name = "lock",
- .usage = "<bank>",
- .handler = str9xpec_handle_flash_lock_command,
- .mode = COMMAND_EXEC,
- .help = "lock str9xpec device",
- },
- {
- .name = "unlock",
- .usage = "<bank>",
- .handler = str9xpec_handle_flash_unlock_command,
- .mode = COMMAND_EXEC,
- .help = "unlock str9xpec device",
- },
- {
- .name = "part_id",
- .handler = str9xpec_handle_part_id_command,
- .mode = COMMAND_EXEC,
- .help = "print part id of str9xpec flash bank <num>",
- },
- COMMAND_REGISTRATION_DONE
-};
-
-static const struct command_registration str9xpec_command_handlers[] = {
- {
- .name = "str9xpec",
- .mode = COMMAND_ANY,
- .help = "str9xpec flash command group",
- .usage = "",
- .chain = str9xpec_config_command_handlers,
- },
- COMMAND_REGISTRATION_DONE
-};
-
-struct flash_driver str9xpec_flash = {
- .name = "str9xpec",
- .commands = str9xpec_command_handlers,
- .flash_bank_command = str9xpec_flash_bank_command,
- .erase = str9xpec_erase,
- .protect = str9xpec_protect,
- .write = str9xpec_write,
- .read = default_flash_read,
- .probe = str9xpec_probe,
- .auto_probe = str9xpec_probe,
- .erase_check = str9xpec_erase_check,
- .protect_check = str9xpec_protect_check,
-};