You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@perl.apache.org by "Philip M. Gollucci" <pg...@p6m7g8.com> on 2005/07/24 04:03:28 UTC
Static MP2 builds
Hi,
I'm finally getting around to testing/trying static builds.
Unfortunately, I'm not getting very far:
So I'm being crazy and using perl 5.9.3 with ithreads
and SVN checkouts of httpd, apr, apr-utill, and mod_perl.
apr and apr-util are in httpd/srclib.
I ran httpd's ./buildconf first per instructions on the website. (also
ran apr's buildconf -- probably should ammend to say do that too) This
also applies to apr-util me thinks.
So I went to instigate the error below
[ error] Can't find apr include/ directory,
[ error] use MP_APR_CONFIG=/path/to/apr-config
So I went and looked at lib/Apache2/Build.pm
in sub get_apr_config()
[...]
for (@tries) {
next unless $_ && -e catfile $_, "apr.h";
$self->{apr_includedir} = $_;
last;
}
unless ($self->{apr_includedir}) {
error "Can't find apr include/ directory,",
"use MP_APR_CONFIG=/path/to/apr-config";
exit 1;
}
So its looking for apr.h --- this doesn't exist yet as
apr's configure hasn't been run.
? AM I GOING Crazy ?
Maybe a patch (I'll craft it) so that if $self->httpd_is_source_tree
is set, then it looks for apr.h.in
--------------------
CFLAGS="-DAP_UNSAFE_ERROR_LOG_UNESCAPED -ggdb3 -O0" \
$PREFIX/perl/bin/perl Makefile.PL \
MP_MAINTAINER=1 \
MP_DEBUG=1 \
MP_TRACE=1 \
MP_AP_PREFIX=/usr/local/dev/repos/ASF/httpd/httpd/trunk \
MP_AP_CONFIGURE=" \
--prefix=$PREFIX/httpd \
--with-perl=$PREFIX/perl/bin/perl \
--enable-v4-mapped \
--with-dbm=sdbm \
--with-ssl=/usr \
--enable-ssl \
--enable-so \
--with-port=8004 \
--with-mpm=worker \
--with-expat=/usr/local \
--enable-maintainer-mode \
--enable-threads \
--enable-debug \
--enable-mods-shared=all \
--enable-modules=all \
--enable-deflate=shared \
--enable-proxy=shared \
--enable-threads \
--disable-log-forensic "
no conflicting prior mod_perl version found - good.
Configuring Apache/2.3.01 mod_perl2/2.0.2-dev Perl/vv5.9.3
[ error] Can't find apr include/ directory,
[ error] use MP_APR_CONFIG=/path/to/apr-config
cd /usr/local/dev/repos/ASF/perl/modperl/trunk ; make all install
cd "src/modules/perl" && make
make: don't know how to make
/usr/local/apps/5.9.3-ithreads_2.1.7_work//perl/lib/CORE/libperl.so. Stop
*** Error code 2
Stop in /usr/local/dev/repos/ASF/perl/modperl/trunk.
--
END
------------------------------------------------------------
What doesn't kill us can only make us stronger.
Nothing is impossible.
Philip M. Gollucci (pgollucci@p6m7g8.com) 301.254.5198
Consultant / http://p6m7g8.net/Resume/
Senior Developer / Liquidity Services, Inc.
http://www.liquidityservicesinc.com
http://www.liquidation.com
http://www.uksurplus.com
http://www.govliquidation.com
http://www.gowholesale.com
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: Static MP2 builds
Posted by Nikolay Ananiev <ha...@3dzone-bg.com>.
Philip, check this
http://www.issociate.de/board/post/187484/Another_error_with_MP_STATIC_EXTS=1.html
and also check todo/release
"Philip M. Gollucci" <pg...@p6m7g8.com> wrote in message
news:42E5CD77.9090307@p6m7g8.com...
> Philip M. Gollucci wrote:
> > Philippe M. Chiasson wrote:
> >
> >> You are missing: MP_USE_STATIC=1 in there...
> Okay, Static builds work well for me. Now onto the next one:
> MP_STATIC_EXTS=1 + MP_USE_STATIC=1
>
> The docs say:
> Build Apache2::*.xs as static extensions; I however, get an error:
>
> Making all in support
> [snip]
> make: don't know how to make
> ../../../blib/arch/auto/APR/Base64/Base64.so. Stop
> *** Error code 2
> Stop in /usr/local/dev/repos/ASF/perl/modperl/trunk/WrapXS/APR.
> *** Error code 1
> Stop in /usr/local/dev/repos/ASF/perl/modperl/trunk/WrapXS.
> *** Error code 1
> Stop in /usr/local/dev/repos/ASF/perl/modperl/trunk.
>
> First question, is Apache2::*.xs supposed to include the APR wrappers?
>
>
>
> Configure lines below:
> cd $MP2_SRC ; svn up
> cd $MP2_SRC ; make distclean
> cd httpd-2.0.54 ; make realclean ; ./buildconf
> cd $MP2_SRC ; CFLAGS="-DAP_UNSAFE_ERROR_LOG_UNESCAPED -ggdb3 -O0" \
> $PREFIX/perl/bin/perl Makefile.PL \
> MP_USE_STATIC=1 \
> MP_STATIC_EXTS=1 \
> MP_MAINTAINER=1 \
> MP_DEBUG=1 \
> MP_TRACE=1 \
> MP_AP_PREFIX=/usr/local/dev/src/httpd-2.0.54 \
> MP_AP_CONFIGURE=" \
> --prefix=$PREFIX/httpd \
> --with-perl=$PREFIX/perl/bin/perl \
> --enable-v4-mapped \
> --with-dbm=sdbm \
> --with-ssl=/usr \
> --enable-ssl \
> --enable-so \
> --with-port=8007 \
> --with-mpm=worker \
> --with-expat=/usr/local \
> --enable-maintainer-mode \
> --enable-threads \
> --enable-debug \
> --enable-mods-shared=all \
> --enable-modules=all \
> --enable-deflate=shared \
> --enable-proxy=shared \
> --enable-threads \
> --disable-log-forensic "
> cd $MP2_SRC ; make all install
>
>
> --
> END
> ------------------------------------------------------------
> What doesn't kill us can only make us stronger.
> Nothing is impossible.
>
> Philip M. Gollucci (pgollucci@p6m7g8.com) 301.254.5198
> Consultant / http://p6m7g8.net/Resume/resume.shtml
> Senior Developer / Liquidity Services, Inc.
> http://www.liquidityservicesinc.com
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: Static MP2 builds
Posted by "Philip M. Gollucci" <pg...@p6m7g8.com>.
Philip M. Gollucci wrote:
> Philippe M. Chiasson wrote:
>
>> You are missing: MP_USE_STATIC=1 in there...
Okay, Static builds work well for me. Now onto the next one:
MP_STATIC_EXTS=1 + MP_USE_STATIC=1
The docs say:
Build Apache2::*.xs as static extensions; I however, get an error:
Making all in support
[snip]
make: don't know how to make
../../../blib/arch/auto/APR/Base64/Base64.so. Stop
*** Error code 2
Stop in /usr/local/dev/repos/ASF/perl/modperl/trunk/WrapXS/APR.
*** Error code 1
Stop in /usr/local/dev/repos/ASF/perl/modperl/trunk/WrapXS.
*** Error code 1
Stop in /usr/local/dev/repos/ASF/perl/modperl/trunk.
First question, is Apache2::*.xs supposed to include the APR wrappers?
Configure lines below:
cd $MP2_SRC ; svn up
cd $MP2_SRC ; make distclean
cd httpd-2.0.54 ; make realclean ; ./buildconf
cd $MP2_SRC ; CFLAGS="-DAP_UNSAFE_ERROR_LOG_UNESCAPED -ggdb3 -O0" \
$PREFIX/perl/bin/perl Makefile.PL \
MP_USE_STATIC=1 \
MP_STATIC_EXTS=1 \
MP_MAINTAINER=1 \
MP_DEBUG=1 \
MP_TRACE=1 \
MP_AP_PREFIX=/usr/local/dev/src/httpd-2.0.54 \
MP_AP_CONFIGURE=" \
--prefix=$PREFIX/httpd \
--with-perl=$PREFIX/perl/bin/perl \
--enable-v4-mapped \
--with-dbm=sdbm \
--with-ssl=/usr \
--enable-ssl \
--enable-so \
--with-port=8007 \
--with-mpm=worker \
--with-expat=/usr/local \
--enable-maintainer-mode \
--enable-threads \
--enable-debug \
--enable-mods-shared=all \
--enable-modules=all \
--enable-deflate=shared \
--enable-proxy=shared \
--enable-threads \
--disable-log-forensic "
cd $MP2_SRC ; make all install
--
END
------------------------------------------------------------
What doesn't kill us can only make us stronger.
Nothing is impossible.
Philip M. Gollucci (pgollucci@p6m7g8.com) 301.254.5198
Consultant / http://p6m7g8.net/Resume/resume.shtml
Senior Developer / Liquidity Services, Inc.
http://www.liquidityservicesinc.com
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: Static MP2 builds
Posted by "Philip M. Gollucci" <pg...@p6m7g8.com>.
Philippe M. Chiasson wrote:
>You are missing: MP_USE_STATIC=1 in there...
>
>
D'oh!
Thanks!
--
END
---------------------------------------------------------
What doesn't kill us can only make us stronger.
Nothing is impossible.
Philip M. Gollucci (pgollucci@p6m7g8.com) 301.254.5198
Consultant / http://p6m7g8.net/Resume/resume.shtml
Senior Developer / Liquidity Services, Inc.
http://www.liquidityservicesinc.com
http://www.liquidation.com
http://www.uksurplus.com
http://www.govliquidation.com
http://www.gowholesale.com
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: Static MP2 builds
Posted by "Philippe M. Chiasson" <go...@ectoplasm.org>.
Philip M. Gollucci wrote:
> Hi,
>
> I'm finally getting around to testing/trying static builds.
>
> Unfortunately, I'm not getting very far:
>
> So I'm being crazy and using perl 5.9.3 with ithreads
> and SVN checkouts of httpd, apr, apr-utill, and mod_perl.
> apr and apr-util are in httpd/srclib.
>
> I ran httpd's ./buildconf first per instructions on the website. (also
> ran apr's buildconf -- probably should ammend to say do that too) This
> also applies to apr-util me thinks.
>
> So I went to instigate the error below
> [ error] Can't find apr include/ directory,
> [ error] use MP_APR_CONFIG=/path/to/apr-config
>
You are missing: MP_USE_STATIC=1 in there...
> CFLAGS="-DAP_UNSAFE_ERROR_LOG_UNESCAPED -ggdb3 -O0" \
> $PREFIX/perl/bin/perl Makefile.PL \
> MP_MAINTAINER=1 \
> MP_DEBUG=1 \
> MP_TRACE=1 \
> MP_AP_PREFIX=/usr/local/dev/repos/ASF/httpd/httpd/trunk \
> MP_AP_CONFIGURE=" \
> --prefix=$PREFIX/httpd \
> --with-perl=$PREFIX/perl/bin/perl \
> --enable-v4-mapped \
> --with-dbm=sdbm \
> --with-ssl=/usr \
> --enable-ssl \
> --enable-so \
> --with-port=8004 \
> --with-mpm=worker \
> --with-expat=/usr/local \
> --enable-maintainer-mode \
> --enable-threads \
> --enable-debug \
> --enable-mods-shared=all \
> --enable-modules=all \
> --enable-deflate=shared \
> --enable-proxy=shared \
> --enable-threads \
> --disable-log-forensic "
--------------------------------------------------------------------------------
Philippe M. Chiasson m/gozer\@(apache|cpan|ectoplasm)\.org/ GPG KeyID : 88C3A5A5
http://gozer.ectoplasm.org/ F9BF E0C2 480E 7680 1AE5 3631 CB32 A107 88C3A5A5