You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@activemq.apache.org by "Dondorp, Erwin" <er...@cgi.com.INVALID> on 2024/10/13 20:27:24 UTC
new Artemis Console question
Classification: Public
Hello,
I'm trying the new Artemis Console.
Installing it with jetty-home-12.0.14 and apache-artemis-console-1.0.0 was fine. I followed the details from https://activemq.apache.org/components/artemis-console/documentation/
I only needed to tell jetty to use port 8162, as 8080 and 8161 were already in use.
The connection to the broker could be added in the gui.
When the connection is used with a wrong username/password, the error message "Incorrect username or password" appears as expected.
But with the right username/password, nothing visibly happens, and the following error appears in the webbrowser console.
Uncaught (in promise) TypeError: window.crypto.subtle is undefined
Ep crypto.ts:6
b d0339a10.chunk.js:1.238
This happens for Firefox and Edge to rule out specific browser behavior.
Does this look familiar to anyone? Any hints?
thx!
Erwin
Re: new Artemis Console question
Posted by Andy Taylor <an...@gmail.com>.
good to hear.
On Fri, 18 Oct 2024 at 16:55, Dondorp, Erwin <er...@cgi.com.invalid>
wrote:
> Classification: Public
>
> Andy,
>
> I found the issue.
> I'm (forced to) using port forwarding to connect to the artemis system.
> But I'm using an alias for 127.0.0.1 (like "computer-xyz") so that cookies
> and passwords are properly remembered by the browser.
> In the "connect" screen, I can only enter hostnames as "localhost" because
> it does not know my local aliases.
> That change in hostname confused the new artemis-console internals enough
> to give the below error.
> Reverting everything to "localhost" solved it (at least good enough for
> demonstration purposes).
>
> Thx!
> Erwin
>
> -----Original Message-----
> From: Dondorp, Erwin
> Sent: Tuesday, October 15, 2024 12:41 AM
> To: 'users@activemq.apache.org' <us...@activemq.apache.org>
> Subject: RE: new Artemis Console question
>
> Classification: Public
>
> Andy,
>
> Thx for the answers!
> I was first using "localhost", then "127.0.0.1" after I found the IPv6
> warning in the documentation.
> I will experiment further now that I know it is not a trivial known cause.
>
> Thx!
> e.
>
> -----Original Message-----
> From: Andy Taylor <an...@gmail.com>
> Sent: Monday, October 14, 2024 1:35 PM
> To: users@activemq.apache.org
> Subject: Re: new Artemis Console question
>
>
> EXTERNAL SENDER: Do not click any links or open any attachments unless
> you trust the sender and know the content is safe.
> EXPÉDITEUR EXTERNE: Ne cliquez sur aucun lien et n’ouvrez aucune pièce
> jointe à moins qu’ils ne proviennent d’un expéditeur fiable, ou que vous
> ayez l'assurance que le contenu provient d'une source sûre.
>
> I have spoken to hawtIO dev and he pointed me at
> https://urldefense.com/v3/__https://developer.mozilla.org/en-US/docs/Web/Security/Secure_Contexts__;!!AaIhyw!sjCWzezh19QJxKckg_zjVdAppKD3T5ahKCjpkLkSi_5Hw2_RT95JJYzUfpuGz2YkAjsfJhz7UeUbUg3kaU-3IgI$
>
> So I am guessing the URL you are using is causing this to happen, saying
> that localhost/127.0.0.1 should work, anything else you need to configure
> https. Maybe you are using a different hostname or localhost isnt mapped
> correctly?
>
>
> On Mon, 14 Oct 2024 at 10:06, Andy Taylor <an...@gmail.com> wrote:
>
> > I haven't seen that before, can you supply your connection config for
> > jolokia. Also what version of Artemis are you using?
> >
> > On Sun, 13 Oct 2024 at 21:27, Dondorp, Erwin
> > <er...@cgi.com.invalid>
> > wrote:
> >
> >> Classification: Public
> >>
> >> Hello,
> >>
> >> I'm trying the new Artemis Console.
> >> Installing it with jetty-home-12.0.14 and
> >> apache-artemis-console-1.0.0 was fine. I followed the details from
> >> https://urldefense.com/v3/__https://activemq.apache.org/components/ar
> >> temis-console/documentation/__;!!AaIhyw!sjCWzezh19QJxKckg_zjVdAppKD3T
> >> 5ahKCjpkLkSi_5Hw2_RT95JJYzUfpuGz2YkAjsfJhz7UeUbUg3krEGfpGM$
> >> I only needed to tell jetty to use port 8162, as 8080 and 8161 were
> >> already in use.
> >> The connection to the broker could be added in the gui.
> >> When the connection is used with a wrong username/password, the error
> >> message "Incorrect username or password" appears as expected.
> >>
> >> But with the right username/password, nothing visibly happens, and
> >> the following error appears in the webbrowser console.
> >> Uncaught (in promise) TypeError: window.crypto.subtle is undefined
> >> Ep crypto.ts:6
> >> b d0339a10.chunk.js:1.238
> >> This happens for Firefox and Edge to rule out specific browser behavior.
> >>
> >> Does this look familiar to anyone? Any hints?
> >>
> >> thx!
> >> Erwin
> >>
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@activemq.apache.org
> For additional commands, e-mail: users-help@activemq.apache.org
> For further information, visit: https://activemq.apache.org/contact
>
>
RE: new Artemis Console question
Posted by "Dondorp, Erwin" <er...@cgi.com.INVALID>.
Classification: Public
Andy,
I found the issue.
I'm (forced to) using port forwarding to connect to the artemis system.
But I'm using an alias for 127.0.0.1 (like "computer-xyz") so that cookies and passwords are properly remembered by the browser.
In the "connect" screen, I can only enter hostnames as "localhost" because it does not know my local aliases.
That change in hostname confused the new artemis-console internals enough to give the below error.
Reverting everything to "localhost" solved it (at least good enough for demonstration purposes).
Thx!
Erwin
-----Original Message-----
From: Dondorp, Erwin
Sent: Tuesday, October 15, 2024 12:41 AM
To: 'users@activemq.apache.org' <us...@activemq.apache.org>
Subject: RE: new Artemis Console question
Classification: Public
Andy,
Thx for the answers!
I was first using "localhost", then "127.0.0.1" after I found the IPv6 warning in the documentation.
I will experiment further now that I know it is not a trivial known cause.
Thx!
e.
-----Original Message-----
From: Andy Taylor <an...@gmail.com>
Sent: Monday, October 14, 2024 1:35 PM
To: users@activemq.apache.org
Subject: Re: new Artemis Console question
EXTERNAL SENDER: Do not click any links or open any attachments unless you trust the sender and know the content is safe.
EXPÉDITEUR EXTERNE: Ne cliquez sur aucun lien et n’ouvrez aucune pièce jointe à moins qu’ils ne proviennent d’un expéditeur fiable, ou que vous ayez l'assurance que le contenu provient d'une source sûre.
I have spoken to hawtIO dev and he pointed me at https://urldefense.com/v3/__https://developer.mozilla.org/en-US/docs/Web/Security/Secure_Contexts__;!!AaIhyw!sjCWzezh19QJxKckg_zjVdAppKD3T5ahKCjpkLkSi_5Hw2_RT95JJYzUfpuGz2YkAjsfJhz7UeUbUg3kaU-3IgI$
So I am guessing the URL you are using is causing this to happen, saying that localhost/127.0.0.1 should work, anything else you need to configure https. Maybe you are using a different hostname or localhost isnt mapped correctly?
On Mon, 14 Oct 2024 at 10:06, Andy Taylor <an...@gmail.com> wrote:
> I haven't seen that before, can you supply your connection config for
> jolokia. Also what version of Artemis are you using?
>
> On Sun, 13 Oct 2024 at 21:27, Dondorp, Erwin
> <er...@cgi.com.invalid>
> wrote:
>
>> Classification: Public
>>
>> Hello,
>>
>> I'm trying the new Artemis Console.
>> Installing it with jetty-home-12.0.14 and
>> apache-artemis-console-1.0.0 was fine. I followed the details from
>> https://urldefense.com/v3/__https://activemq.apache.org/components/ar
>> temis-console/documentation/__;!!AaIhyw!sjCWzezh19QJxKckg_zjVdAppKD3T
>> 5ahKCjpkLkSi_5Hw2_RT95JJYzUfpuGz2YkAjsfJhz7UeUbUg3krEGfpGM$
>> I only needed to tell jetty to use port 8162, as 8080 and 8161 were
>> already in use.
>> The connection to the broker could be added in the gui.
>> When the connection is used with a wrong username/password, the error
>> message "Incorrect username or password" appears as expected.
>>
>> But with the right username/password, nothing visibly happens, and
>> the following error appears in the webbrowser console.
>> Uncaught (in promise) TypeError: window.crypto.subtle is undefined
>> Ep crypto.ts:6
>> b d0339a10.chunk.js:1.238
>> This happens for Firefox and Edge to rule out specific browser behavior.
>>
>> Does this look familiar to anyone? Any hints?
>>
>> thx!
>> Erwin
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@activemq.apache.org
For additional commands, e-mail: users-help@activemq.apache.org
For further information, visit: https://activemq.apache.org/contact
RE: new Artemis Console question
Posted by "Dondorp, Erwin" <er...@cgi.com.INVALID>.
Classification: Public
Andy,
Thx for the answers!
I was first using "localhost", then "127.0.0.1" after I found the IPv6 warning in the documentation.
I will experiment further now that I know it is not a trivial known cause.
Thx!
e.
-----Original Message-----
From: Andy Taylor <an...@gmail.com>
Sent: Monday, October 14, 2024 1:35 PM
To: users@activemq.apache.org
Subject: Re: new Artemis Console question
EXTERNAL SENDER: Do not click any links or open any attachments unless you trust the sender and know the content is safe.
EXPÉDITEUR EXTERNE: Ne cliquez sur aucun lien et n’ouvrez aucune pièce jointe à moins qu’ils ne proviennent d’un expéditeur fiable, ou que vous ayez l'assurance que le contenu provient d'une source sûre.
I have spoken to hawtIO dev and he pointed me at https://urldefense.com/v3/__https://developer.mozilla.org/en-US/docs/Web/Security/Secure_Contexts__;!!AaIhyw!sjCWzezh19QJxKckg_zjVdAppKD3T5ahKCjpkLkSi_5Hw2_RT95JJYzUfpuGz2YkAjsfJhz7UeUbUg3kaU-3IgI$
So I am guessing the URL you are using is causing this to happen, saying that localhost/127.0.0.1 should work, anything else you need to configure https. Maybe you are using a different hostname or localhost isnt mapped correctly?
On Mon, 14 Oct 2024 at 10:06, Andy Taylor <an...@gmail.com> wrote:
> I haven't seen that before, can you supply your connection config for
> jolokia. Also what version of Artemis are you using?
>
> On Sun, 13 Oct 2024 at 21:27, Dondorp, Erwin
> <er...@cgi.com.invalid>
> wrote:
>
>> Classification: Public
>>
>> Hello,
>>
>> I'm trying the new Artemis Console.
>> Installing it with jetty-home-12.0.14 and
>> apache-artemis-console-1.0.0 was fine. I followed the details from
>> https://urldefense.com/v3/__https://activemq.apache.org/components/ar
>> temis-console/documentation/__;!!AaIhyw!sjCWzezh19QJxKckg_zjVdAppKD3T
>> 5ahKCjpkLkSi_5Hw2_RT95JJYzUfpuGz2YkAjsfJhz7UeUbUg3krEGfpGM$
>> I only needed to tell jetty to use port 8162, as 8080 and 8161 were
>> already in use.
>> The connection to the broker could be added in the gui.
>> When the connection is used with a wrong username/password, the error
>> message "Incorrect username or password" appears as expected.
>>
>> But with the right username/password, nothing visibly happens, and
>> the following error appears in the webbrowser console.
>> Uncaught (in promise) TypeError: window.crypto.subtle is undefined
>> Ep crypto.ts:6
>> b d0339a10.chunk.js:1.238
>> This happens for Firefox and Edge to rule out specific browser behavior.
>>
>> Does this look familiar to anyone? Any hints?
>>
>> thx!
>> Erwin
>>
>
Re: new Artemis Console question
Posted by Andy Taylor <an...@gmail.com>.
I have spoken to hawtIO dev and he pointed me at
https://developer.mozilla.org/en-US/docs/Web/Security/Secure_Contexts
So I am guessing the URL you are using is causing this to happen, saying
that localhost/127.0.0.1 should work, anything else you need to configure
https. Maybe you are using a different hostname or localhost isnt mapped
correctly?
On Mon, 14 Oct 2024 at 10:06, Andy Taylor <an...@gmail.com> wrote:
> I haven't seen that before, can you supply your connection config for
> jolokia. Also what version of Artemis are you using?
>
> On Sun, 13 Oct 2024 at 21:27, Dondorp, Erwin <er...@cgi.com.invalid>
> wrote:
>
>> Classification: Public
>>
>> Hello,
>>
>> I'm trying the new Artemis Console.
>> Installing it with jetty-home-12.0.14 and apache-artemis-console-1.0.0
>> was fine. I followed the details from
>> https://activemq.apache.org/components/artemis-console/documentation/
>> I only needed to tell jetty to use port 8162, as 8080 and 8161 were
>> already in use.
>> The connection to the broker could be added in the gui.
>> When the connection is used with a wrong username/password, the error
>> message "Incorrect username or password" appears as expected.
>>
>> But with the right username/password, nothing visibly happens, and the
>> following error appears in the webbrowser console.
>> Uncaught (in promise) TypeError: window.crypto.subtle is undefined
>> Ep crypto.ts:6
>> b d0339a10.chunk.js:1.238
>> This happens for Firefox and Edge to rule out specific browser behavior.
>>
>> Does this look familiar to anyone? Any hints?
>>
>> thx!
>> Erwin
>>
>
Re: new Artemis Console question
Posted by Andy Taylor <an...@gmail.com>.
I haven't seen that before, can you supply your connection config for
jolokia. Also what version of Artemis are you using?
On Sun, 13 Oct 2024 at 21:27, Dondorp, Erwin <er...@cgi.com.invalid>
wrote:
> Classification: Public
>
> Hello,
>
> I'm trying the new Artemis Console.
> Installing it with jetty-home-12.0.14 and apache-artemis-console-1.0.0 was
> fine. I followed the details from
> https://activemq.apache.org/components/artemis-console/documentation/
> I only needed to tell jetty to use port 8162, as 8080 and 8161 were
> already in use.
> The connection to the broker could be added in the gui.
> When the connection is used with a wrong username/password, the error
> message "Incorrect username or password" appears as expected.
>
> But with the right username/password, nothing visibly happens, and the
> following error appears in the webbrowser console.
> Uncaught (in promise) TypeError: window.crypto.subtle is undefined
> Ep crypto.ts:6
> b d0339a10.chunk.js:1.238
> This happens for Firefox and Edge to rule out specific browser behavior.
>
> Does this look familiar to anyone? Any hints?
>
> thx!
> Erwin
>