You are viewing a plain text version of this content. The canonical link for it is here.
Posted to server-user@james.apache.org by pady-geazy <pa...@geazy.com> on 2009/11/12 07:59:52 UTC
simple beginner question...
I have a requirement in my app as follows -
1. A user registers with my app, and registers an email address. ( "a at gmail dot com" )
2. The app sometimes has to send emails on behalf of the user.
3. I have James email server which accepts connections from "appdomain dot com".
4. In the above scenario, today, the app sends the email using the sender as "app at appdomain dot com"
5. But I would like James to process the email as the sender as "app at appdomain dot com" ( thus doing smtp auth ) but then forward the emails using the sender as "a at gmail dot com"
Can this be done with a mailet ?
Thanks
pady
Re: simple beginner question...
Posted by Norman Maurer <no...@googlemail.com>.
Hi Pady,
send the emails as text/plain.
Bye,
Norman
2009/11/13 pady-geazy <pa...@geazy.com>:
> test...most mails i send to this list is getting rejected as mail abuse...
>
> pady
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: simple beginner question...
Posted by pady-geazy <pa...@geazy.com>.
test...most mails i send to this list is getting rejected as mail abuse...
pady
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: simple beginner question...
Posted by pady-geazy <pa...@geazy.com>.
I got it to work by setting a name for the sender in commons-email and then
setting the "From:" header...
email.setFrom("pady at appdomain dot com", "padysrini at gmail dot com" );
email.addHeader("From:", "padysrini at gmail dot com");
MSN does complain about spoofing but atleast it gets delivered.
Thanks, Norman and Stefano.
-- pady
----- Original Message -----
From: "pady-geazy" <pa...@geazy.com>
To: "James Users List" <se...@james.apache.org>
Sent: Friday, November 13, 2009 9:28 PM
Subject: Re: simple beginner question...
>
> Hi Norman,
>
> I tried this also. I still get the error...I am not setting the headers
> correctly...i tried these combinations and I searched for typical smtp
> headers...
>
> email.addHeader("From", info.fromAddress);
>
> email.addHeader("FROM", info.fromAddress);
> email.addHeader("MAIL FROM", info.fromAddress);
>
> email.addHeader("From:", info.fromAddress);
> email.addHeader("Mail From:", info.fromAddress);
>
>
> 235 Authentication Successful
> DEBUG SMTP: use8bit false
> MAIL FROM:<padysrini at gmail dot com>
> 250 2.1.0 Sender <padysrini at gmail dot com> OK
> RCPT TO:<padysrini at hotmail dot com>
> 503 5.7.1 Incorrect Authentication for Specified Email Address
> DEBUG SMTP: Invalid Addresses
> DEBUG SMTP: "padysrini at hotmail dot com" <padysrini at hotmail dot
> com>
> DEBUG SMTP: Sending failed because of invalid destination addresses
> RSET
> 250 2.0.0 OK
> javax.mail.SendFailedException: Invalid Addresses;
> nested exception is:
> com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
> Authentication for Specified Email Address
>
>
> pady
>
>
> ----- Original Message -----
> From: "Norman Maurer" <no...@googlemail.com>
> To: "James Users List" <se...@james.apache.org>
> Sent: Friday, November 13, 2009 8:47 PM
> Subject: Re: simple beginner question...
>
>
>> Hi Pady,
>>
>> yeah just use the address you want in "MAIL FROM" and FROM header.
>>
>> Bye,
>> Norman
>>
>> 2009/11/13 pady-geazy <pa...@geazy.com>:
>>> Hi Stefano,
>>>
>>> I can send emails. Just that it allows only from addresses that have
>>> 'appdomain dot com'. I do have authentication enabled. Just that it only
>>> allows 'appdomain dot com' sender addresses alone. I was wondering if it
>>> is
>>> possible to continue to use authentication, send email as 'app at
>>> appdomain
>>> dot com' but spoof the send address after authentication to 'user at
>>> gmail
>>> dot com'.
>>>
>>> pady
>>>
>>> ----- Original Message ----- From: "Stefano Bagnara" <ap...@bago.org>
>>> To: "James Users List" <se...@james.apache.org>
>>> Sent: Friday, November 13, 2009 1:33 PM
>>> Subject: Re: simple beginner question...
>>>
>>>
>>> either you enable authentication for James (and use it from your
>>> client) or you add the client IP to the <authorizedAddresses>
>>> configuration.
>>>
>>> Stefano
>>>
>>> 2009/11/13 pady-geazy <pa...@geazy.com>:
>>>>
>>>> Hi Norman,
>>>>
>>>> Thanks for your reply. I tried setting the "from" address alone to my
>>>> gmail
>>>> account. And tried to use my server ( with the credentials ) to send
>>>> mail.
>>>> But it fails with this exception -
>>>>
>>>> Here is the debug log output:
>>>>
>>>> DEBUG SMTP: connected to host "mail.geazy.com", port: 25
>>>>
>>>> EHLO padydev
>>>> 250-PRABHA Hello padydev ...
>>>> 250-AUTH LOGIN PLAIN
>>>> 250-AUTH=LOGIN PLAIN
>>>> 250-PIPELINING
>>>> 250 ENHANCEDSTATUSCODES
>>>> DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN"
>>>> DEBUG SMTP: Found extension "AUTH=LOGIN", arg "PLAIN"
>>>> DEBUG SMTP: Found extension "PIPELINING", arg ""
>>>> DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
>>>> DEBUG SMTP: Attempt to authenticate
>>>> AUTH LOGIN
>>>> ...
>>>> ..
>>>> ...
>>>> 235 Authentication Successful
>>>> DEBUG SMTP: use8bit false
>>>> MAIL FROM:<padysrini at gmail dot com>
>>>> 250 2.1.0 Sender <padysrini at gmail dot com>OK
>>>> RCPT TO: <padysrini at hotmail dot com>
>>>> 503 5.7.1 Incorrect Authentication for Specified Email Address
>>>> DEBUG SMTP: Invalid Addresses
>>>> DEBUG SMTP: "padysrini at hotmail dot com"<padysrini at hotmail dot
>>>> com>
>>>> DEBUG SMTP: Sending failed because of invalid destination addresses
>>>> RSET
>>>> 250 2.0.0 OK
>>>> javax.mail.SendFailedException: Invalid Addresses;
>>>> nested exception is:
>>>> com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
>>>> Authentication for Specified Email Address
>>>>
>>>> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1294)
>>>> at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:635)
>>>> at javax.mail.Transport.send0(Transport.java:189)
>>>> at javax.mail.Transport.send(Transport.java:118)
>>>> at org.apache.commons.mail.Email.sendMimeMessage(Email.java:1128)
>>>> at org.apache.commons.mail.Email.send(Email.java:1163)
>>>> at
>>>>
>>>> com.geazy.frames.server.utils.ServerUtils.sendHtmlEmail(ServerUtils.java:151)
>>>> at com.geazy.frames.server.utils.ServerUtils.main(ServerUtils.java:296)
>>>> Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1
>>>> Incorrect
>>>> Authentication for Specified Email Address
>>>>
>>>> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1145)
>>>> ... 7 more
>>>> QUIT
>>>>
>>>>
>>>> I use apache commons mail to send mail. Here is the code:
>>>>
>>>> HtmlEmail email = new HtmlEmail();
>>>>
>>>> email.setHostName(info.mailserver);
>>>> email.setAuthentication(info.username, info.password);
>>>> email.setSmtpPort(info.smtpport);
>>>> email.setFrom("padysrini at gmail dot com");
>>>> email.addTo("padysrini at hotmail dot com");
>>>> email.setSubject(subject);
>>>>
>>>> email.setHtmlMsg(html);
>>>>
>>>> email.setDebug(true);
>>>>
>>>> email.send();
>>>>
>>>>
>>>> Thanks
>>>>
>>>> pady
>>>>
>>>>
>>>> ----- Original Message ----- From: "Norman Maurer" <no...@apache.org>
>>>> To: "James Users List" <se...@james.apache.org>
>>>> Sent: Friday, November 13, 2009 1:24 AM
>>>> Subject: Re: simple beginner question...
>>>>
>>>>
>>>>> I think there is no need for aspecial mailet. Just Set the Mail from
>>>>> and from headers to the senderaddress you want to use.
>>>>>
>>>>> Bye
>>>>> norman
>>>>> 2009/11/12, pady-geazy <pa...@geazy.com>:
>>>>>>
>>>>>>
>>>>>> I have a requirement in my app as follows -
>>>>>>
>>>>>> 1. A user registers with my app, and registers an email address. ( "a
>>>>>> at
>>>>>> gmail dot com" )
>>>>>>
>>>>>> 2. The app sometimes has to send emails on behalf of the user.
>>>>>>
>>>>>> 3. I have James email server which accepts connections from
>>>>>> "appdomain
>>>>>> dot
>>>>>> com".
>>>>>>
>>>>>> 4. In the above scenario, today, the app sends the email using the
>>>>>> sender
>>>>>> as
>>>>>> "app at appdomain dot com"
>>>>>>
>>>>>> 5. But I would like James to process the email as the sender as "app
>>>>>> at
>>>>>> appdomain dot com" ( thus doing smtp auth ) but then forward the
>>>>>> emails
>>>>>> using the sender as "a at gmail dot com"
>>>>>>
>>>>>>
>>>>>> Can this be done with a mailet ?
>>>>>>
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> pady
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>>> For additional commands, e-mail: server-user-help@james.apache.org
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>> For additional commands, e-mail: server-user-help@james.apache.org
>>
>>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: simple beginner question...
Posted by pady-geazy <pa...@geazy.com>.
Hi Norman,
I tried this also. I still get the error...I am not setting the headers
correctly...i tried these combinations and I searched for typical smtp
headers...
email.addHeader("From", info.fromAddress);
email.addHeader("FROM", info.fromAddress);
email.addHeader("MAIL FROM", info.fromAddress);
email.addHeader("From:", info.fromAddress);
email.addHeader("Mail From:", info.fromAddress);
235 Authentication Successful
DEBUG SMTP: use8bit false
MAIL FROM:<padysrini at gmail dot com>
250 2.1.0 Sender <padysrini at gmail dot com> OK
RCPT TO:<padysrini at hotmail dot com>
503 5.7.1 Incorrect Authentication for Specified Email Address
DEBUG SMTP: Invalid Addresses
DEBUG SMTP: "padysrini at hotmail dot com" <padysrini at hotmail dot com>
DEBUG SMTP: Sending failed because of invalid destination addresses
RSET
250 2.0.0 OK
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
Authentication for Specified Email Address
pady
----- Original Message -----
From: "Norman Maurer" <no...@googlemail.com>
To: "James Users List" <se...@james.apache.org>
Sent: Friday, November 13, 2009 8:47 PM
Subject: Re: simple beginner question...
> Hi Pady,
>
> yeah just use the address you want in "MAIL FROM" and FROM header.
>
> Bye,
> Norman
>
> 2009/11/13 pady-geazy <pa...@geazy.com>:
>> Hi Stefano,
>>
>> I can send emails. Just that it allows only from addresses that have
>> 'appdomain dot com'. I do have authentication enabled. Just that it only
>> allows 'appdomain dot com' sender addresses alone. I was wondering if it
>> is
>> possible to continue to use authentication, send email as 'app at
>> appdomain
>> dot com' but spoof the send address after authentication to 'user at
>> gmail
>> dot com'.
>>
>> pady
>>
>> ----- Original Message ----- From: "Stefano Bagnara" <ap...@bago.org>
>> To: "James Users List" <se...@james.apache.org>
>> Sent: Friday, November 13, 2009 1:33 PM
>> Subject: Re: simple beginner question...
>>
>>
>> either you enable authentication for James (and use it from your
>> client) or you add the client IP to the <authorizedAddresses>
>> configuration.
>>
>> Stefano
>>
>> 2009/11/13 pady-geazy <pa...@geazy.com>:
>>>
>>> Hi Norman,
>>>
>>> Thanks for your reply. I tried setting the "from" address alone to my
>>> gmail
>>> account. And tried to use my server ( with the credentials ) to send
>>> mail.
>>> But it fails with this exception -
>>>
>>> Here is the debug log output:
>>>
>>> DEBUG SMTP: connected to host "mail.geazy.com", port: 25
>>>
>>> EHLO padydev
>>> 250-PRABHA Hello padydev ...
>>> 250-AUTH LOGIN PLAIN
>>> 250-AUTH=LOGIN PLAIN
>>> 250-PIPELINING
>>> 250 ENHANCEDSTATUSCODES
>>> DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN"
>>> DEBUG SMTP: Found extension "AUTH=LOGIN", arg "PLAIN"
>>> DEBUG SMTP: Found extension "PIPELINING", arg ""
>>> DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
>>> DEBUG SMTP: Attempt to authenticate
>>> AUTH LOGIN
>>> ...
>>> ..
>>> ...
>>> 235 Authentication Successful
>>> DEBUG SMTP: use8bit false
>>> MAIL FROM:<padysrini at gmail dot com>
>>> 250 2.1.0 Sender <padysrini at gmail dot com>OK
>>> RCPT TO: <padysrini at hotmail dot com>
>>> 503 5.7.1 Incorrect Authentication for Specified Email Address
>>> DEBUG SMTP: Invalid Addresses
>>> DEBUG SMTP: "padysrini at hotmail dot com"<padysrini at hotmail dot com>
>>> DEBUG SMTP: Sending failed because of invalid destination addresses
>>> RSET
>>> 250 2.0.0 OK
>>> javax.mail.SendFailedException: Invalid Addresses;
>>> nested exception is:
>>> com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
>>> Authentication for Specified Email Address
>>>
>>> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1294)
>>> at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:635)
>>> at javax.mail.Transport.send0(Transport.java:189)
>>> at javax.mail.Transport.send(Transport.java:118)
>>> at org.apache.commons.mail.Email.sendMimeMessage(Email.java:1128)
>>> at org.apache.commons.mail.Email.send(Email.java:1163)
>>> at
>>>
>>> com.geazy.frames.server.utils.ServerUtils.sendHtmlEmail(ServerUtils.java:151)
>>> at com.geazy.frames.server.utils.ServerUtils.main(ServerUtils.java:296)
>>> Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1
>>> Incorrect
>>> Authentication for Specified Email Address
>>>
>>> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1145)
>>> ... 7 more
>>> QUIT
>>>
>>>
>>> I use apache commons mail to send mail. Here is the code:
>>>
>>> HtmlEmail email = new HtmlEmail();
>>>
>>> email.setHostName(info.mailserver);
>>> email.setAuthentication(info.username, info.password);
>>> email.setSmtpPort(info.smtpport);
>>> email.setFrom("padysrini at gmail dot com");
>>> email.addTo("padysrini at hotmail dot com");
>>> email.setSubject(subject);
>>>
>>> email.setHtmlMsg(html);
>>>
>>> email.setDebug(true);
>>>
>>> email.send();
>>>
>>>
>>> Thanks
>>>
>>> pady
>>>
>>>
>>> ----- Original Message ----- From: "Norman Maurer" <no...@apache.org>
>>> To: "James Users List" <se...@james.apache.org>
>>> Sent: Friday, November 13, 2009 1:24 AM
>>> Subject: Re: simple beginner question...
>>>
>>>
>>>> I think there is no need for aspecial mailet. Just Set the Mail from
>>>> and from headers to the senderaddress you want to use.
>>>>
>>>> Bye
>>>> norman
>>>> 2009/11/12, pady-geazy <pa...@geazy.com>:
>>>>>
>>>>>
>>>>> I have a requirement in my app as follows -
>>>>>
>>>>> 1. A user registers with my app, and registers an email address. ( "a
>>>>> at
>>>>> gmail dot com" )
>>>>>
>>>>> 2. The app sometimes has to send emails on behalf of the user.
>>>>>
>>>>> 3. I have James email server which accepts connections from "appdomain
>>>>> dot
>>>>> com".
>>>>>
>>>>> 4. In the above scenario, today, the app sends the email using the
>>>>> sender
>>>>> as
>>>>> "app at appdomain dot com"
>>>>>
>>>>> 5. But I would like James to process the email as the sender as "app
>>>>> at
>>>>> appdomain dot com" ( thus doing smtp auth ) but then forward the
>>>>> emails
>>>>> using the sender as "a at gmail dot com"
>>>>>
>>>>>
>>>>> Can this be done with a mailet ?
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>> pady
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>> For additional commands, e-mail: server-user-help@james.apache.org
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
>> For additional commands, e-mail: server-user-help@james.apache.org
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: simple beginner question...
Posted by Norman Maurer <no...@googlemail.com>.
Hi Pady,
yeah just use the address you want in "MAIL FROM" and FROM header.
Bye,
Norman
2009/11/13 pady-geazy <pa...@geazy.com>:
> Hi Stefano,
>
> I can send emails. Just that it allows only from addresses that have
> 'appdomain dot com'. I do have authentication enabled. Just that it only
> allows 'appdomain dot com' sender addresses alone. I was wondering if it is
> possible to continue to use authentication, send email as 'app at appdomain
> dot com' but spoof the send address after authentication to 'user at gmail
> dot com'.
>
> pady
>
> ----- Original Message ----- From: "Stefano Bagnara" <ap...@bago.org>
> To: "James Users List" <se...@james.apache.org>
> Sent: Friday, November 13, 2009 1:33 PM
> Subject: Re: simple beginner question...
>
>
> either you enable authentication for James (and use it from your
> client) or you add the client IP to the <authorizedAddresses>
> configuration.
>
> Stefano
>
> 2009/11/13 pady-geazy <pa...@geazy.com>:
>>
>> Hi Norman,
>>
>> Thanks for your reply. I tried setting the "from" address alone to my
>> gmail
>> account. And tried to use my server ( with the credentials ) to send mail.
>> But it fails with this exception -
>>
>> Here is the debug log output:
>>
>> DEBUG SMTP: connected to host "mail.geazy.com", port: 25
>>
>> EHLO padydev
>> 250-PRABHA Hello padydev ...
>> 250-AUTH LOGIN PLAIN
>> 250-AUTH=LOGIN PLAIN
>> 250-PIPELINING
>> 250 ENHANCEDSTATUSCODES
>> DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN"
>> DEBUG SMTP: Found extension "AUTH=LOGIN", arg "PLAIN"
>> DEBUG SMTP: Found extension "PIPELINING", arg ""
>> DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
>> DEBUG SMTP: Attempt to authenticate
>> AUTH LOGIN
>> ...
>> ..
>> ...
>> 235 Authentication Successful
>> DEBUG SMTP: use8bit false
>> MAIL FROM:<padysrini at gmail dot com>
>> 250 2.1.0 Sender <padysrini at gmail dot com>OK
>> RCPT TO: <padysrini at hotmail dot com>
>> 503 5.7.1 Incorrect Authentication for Specified Email Address
>> DEBUG SMTP: Invalid Addresses
>> DEBUG SMTP: "padysrini at hotmail dot com"<padysrini at hotmail dot com>
>> DEBUG SMTP: Sending failed because of invalid destination addresses
>> RSET
>> 250 2.0.0 OK
>> javax.mail.SendFailedException: Invalid Addresses;
>> nested exception is:
>> com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
>> Authentication for Specified Email Address
>>
>> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1294)
>> at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:635)
>> at javax.mail.Transport.send0(Transport.java:189)
>> at javax.mail.Transport.send(Transport.java:118)
>> at org.apache.commons.mail.Email.sendMimeMessage(Email.java:1128)
>> at org.apache.commons.mail.Email.send(Email.java:1163)
>> at
>>
>> com.geazy.frames.server.utils.ServerUtils.sendHtmlEmail(ServerUtils.java:151)
>> at com.geazy.frames.server.utils.ServerUtils.main(ServerUtils.java:296)
>> Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1
>> Incorrect
>> Authentication for Specified Email Address
>>
>> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1145)
>> ... 7 more
>> QUIT
>>
>>
>> I use apache commons mail to send mail. Here is the code:
>>
>> HtmlEmail email = new HtmlEmail();
>>
>> email.setHostName(info.mailserver);
>> email.setAuthentication(info.username, info.password);
>> email.setSmtpPort(info.smtpport);
>> email.setFrom("padysrini at gmail dot com");
>> email.addTo("padysrini at hotmail dot com");
>> email.setSubject(subject);
>>
>> email.setHtmlMsg(html);
>>
>> email.setDebug(true);
>>
>> email.send();
>>
>>
>> Thanks
>>
>> pady
>>
>>
>> ----- Original Message ----- From: "Norman Maurer" <no...@apache.org>
>> To: "James Users List" <se...@james.apache.org>
>> Sent: Friday, November 13, 2009 1:24 AM
>> Subject: Re: simple beginner question...
>>
>>
>>> I think there is no need for aspecial mailet. Just Set the Mail from
>>> and from headers to the senderaddress you want to use.
>>>
>>> Bye
>>> norman
>>> 2009/11/12, pady-geazy <pa...@geazy.com>:
>>>>
>>>>
>>>> I have a requirement in my app as follows -
>>>>
>>>> 1. A user registers with my app, and registers an email address. ( "a at
>>>> gmail dot com" )
>>>>
>>>> 2. The app sometimes has to send emails on behalf of the user.
>>>>
>>>> 3. I have James email server which accepts connections from "appdomain
>>>> dot
>>>> com".
>>>>
>>>> 4. In the above scenario, today, the app sends the email using the
>>>> sender
>>>> as
>>>> "app at appdomain dot com"
>>>>
>>>> 5. But I would like James to process the email as the sender as "app at
>>>> appdomain dot com" ( thus doing smtp auth ) but then forward the emails
>>>> using the sender as "a at gmail dot com"
>>>>
>>>>
>>>> Can this be done with a mailet ?
>>>>
>>>>
>>>> Thanks
>>>>
>>>> pady
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: simple beginner question...
Posted by pady-geazy <pa...@geazy.com>.
Hi Stefano,
I can send emails. Just that it allows only from addresses that have
'appdomain dot com'. I do have authentication enabled. Just that it only
allows 'appdomain dot com' sender addresses alone. I was wondering if it is
possible to continue to use authentication, send email as 'app at appdomain
dot com' but spoof the send address after authentication to 'user at gmail
dot com'.
pady
----- Original Message -----
From: "Stefano Bagnara" <ap...@bago.org>
To: "James Users List" <se...@james.apache.org>
Sent: Friday, November 13, 2009 1:33 PM
Subject: Re: simple beginner question...
either you enable authentication for James (and use it from your
client) or you add the client IP to the <authorizedAddresses>
configuration.
Stefano
2009/11/13 pady-geazy <pa...@geazy.com>:
>
> Hi Norman,
>
> Thanks for your reply. I tried setting the "from" address alone to my
> gmail
> account. And tried to use my server ( with the credentials ) to send mail.
> But it fails with this exception -
>
> Here is the debug log output:
>
> DEBUG SMTP: connected to host "mail.geazy.com", port: 25
>
> EHLO padydev
> 250-PRABHA Hello padydev ...
> 250-AUTH LOGIN PLAIN
> 250-AUTH=LOGIN PLAIN
> 250-PIPELINING
> 250 ENHANCEDSTATUSCODES
> DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN"
> DEBUG SMTP: Found extension "AUTH=LOGIN", arg "PLAIN"
> DEBUG SMTP: Found extension "PIPELINING", arg ""
> DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
> DEBUG SMTP: Attempt to authenticate
> AUTH LOGIN
> ...
> ..
> ...
> 235 Authentication Successful
> DEBUG SMTP: use8bit false
> MAIL FROM:<padysrini at gmail dot com>
> 250 2.1.0 Sender <padysrini at gmail dot com>OK
> RCPT TO: <padysrini at hotmail dot com>
> 503 5.7.1 Incorrect Authentication for Specified Email Address
> DEBUG SMTP: Invalid Addresses
> DEBUG SMTP: "padysrini at hotmail dot com"<padysrini at hotmail dot com>
> DEBUG SMTP: Sending failed because of invalid destination addresses
> RSET
> 250 2.0.0 OK
> javax.mail.SendFailedException: Invalid Addresses;
> nested exception is:
> com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
> Authentication for Specified Email Address
>
> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1294)
> at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:635)
> at javax.mail.Transport.send0(Transport.java:189)
> at javax.mail.Transport.send(Transport.java:118)
> at org.apache.commons.mail.Email.sendMimeMessage(Email.java:1128)
> at org.apache.commons.mail.Email.send(Email.java:1163)
> at
> com.geazy.frames.server.utils.ServerUtils.sendHtmlEmail(ServerUtils.java:151)
> at com.geazy.frames.server.utils.ServerUtils.main(ServerUtils.java:296)
> Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1
> Incorrect
> Authentication for Specified Email Address
>
> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1145)
> ... 7 more
> QUIT
>
>
> I use apache commons mail to send mail. Here is the code:
>
> HtmlEmail email = new HtmlEmail();
>
> email.setHostName(info.mailserver);
> email.setAuthentication(info.username, info.password);
> email.setSmtpPort(info.smtpport);
> email.setFrom("padysrini at gmail dot com");
> email.addTo("padysrini at hotmail dot com");
> email.setSubject(subject);
>
> email.setHtmlMsg(html);
>
> email.setDebug(true);
>
> email.send();
>
>
> Thanks
>
> pady
>
>
> ----- Original Message ----- From: "Norman Maurer" <no...@apache.org>
> To: "James Users List" <se...@james.apache.org>
> Sent: Friday, November 13, 2009 1:24 AM
> Subject: Re: simple beginner question...
>
>
>> I think there is no need for aspecial mailet. Just Set the Mail from
>> and from headers to the senderaddress you want to use.
>>
>> Bye
>> norman
>> 2009/11/12, pady-geazy <pa...@geazy.com>:
>>>
>>>
>>> I have a requirement in my app as follows -
>>>
>>> 1. A user registers with my app, and registers an email address. ( "a at
>>> gmail dot com" )
>>>
>>> 2. The app sometimes has to send emails on behalf of the user.
>>>
>>> 3. I have James email server which accepts connections from "appdomain
>>> dot
>>> com".
>>>
>>> 4. In the above scenario, today, the app sends the email using the
>>> sender
>>> as
>>> "app at appdomain dot com"
>>>
>>> 5. But I would like James to process the email as the sender as "app at
>>> appdomain dot com" ( thus doing smtp auth ) but then forward the emails
>>> using the sender as "a at gmail dot com"
>>>
>>>
>>> Can this be done with a mailet ?
>>>
>>>
>>> Thanks
>>>
>>> pady
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: simple beginner question...
Posted by Stefano Bagnara <ap...@bago.org>.
either you enable authentication for James (and use it from your
client) or you add the client IP to the <authorizedAddresses>
configuration.
Stefano
2009/11/13 pady-geazy <pa...@geazy.com>:
>
> Hi Norman,
>
> Thanks for your reply. I tried setting the "from" address alone to my gmail
> account. And tried to use my server ( with the credentials ) to send mail.
> But it fails with this exception -
>
> Here is the debug log output:
>
> DEBUG SMTP: connected to host "mail.geazy.com", port: 25
>
> EHLO padydev
> 250-PRABHA Hello padydev ...
> 250-AUTH LOGIN PLAIN
> 250-AUTH=LOGIN PLAIN
> 250-PIPELINING
> 250 ENHANCEDSTATUSCODES
> DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN"
> DEBUG SMTP: Found extension "AUTH=LOGIN", arg "PLAIN"
> DEBUG SMTP: Found extension "PIPELINING", arg ""
> DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
> DEBUG SMTP: Attempt to authenticate
> AUTH LOGIN
> ...
> ..
> ...
> 235 Authentication Successful
> DEBUG SMTP: use8bit false
> MAIL FROM:<padysrini at gmail dot com>
> 250 2.1.0 Sender <padysrini at gmail dot com>OK
> RCPT TO: <padysrini at hotmail dot com>
> 503 5.7.1 Incorrect Authentication for Specified Email Address
> DEBUG SMTP: Invalid Addresses
> DEBUG SMTP: "padysrini at hotmail dot com"<padysrini at hotmail dot com>
> DEBUG SMTP: Sending failed because of invalid destination addresses
> RSET
> 250 2.0.0 OK
> javax.mail.SendFailedException: Invalid Addresses;
> nested exception is:
> com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
> Authentication for Specified Email Address
>
> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1294)
> at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:635)
> at javax.mail.Transport.send0(Transport.java:189)
> at javax.mail.Transport.send(Transport.java:118)
> at org.apache.commons.mail.Email.sendMimeMessage(Email.java:1128)
> at org.apache.commons.mail.Email.send(Email.java:1163)
> at
> com.geazy.frames.server.utils.ServerUtils.sendHtmlEmail(ServerUtils.java:151)
> at com.geazy.frames.server.utils.ServerUtils.main(ServerUtils.java:296)
> Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
> Authentication for Specified Email Address
>
> at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1145)
> ... 7 more
> QUIT
>
>
> I use apache commons mail to send mail. Here is the code:
>
> HtmlEmail email = new HtmlEmail();
>
> email.setHostName(info.mailserver);
> email.setAuthentication(info.username, info.password);
> email.setSmtpPort(info.smtpport);
> email.setFrom("padysrini at gmail dot com");
> email.addTo("padysrini at hotmail dot com");
> email.setSubject(subject);
>
> email.setHtmlMsg(html);
>
> email.setDebug(true);
>
> email.send();
>
>
> Thanks
>
> pady
>
>
> ----- Original Message ----- From: "Norman Maurer" <no...@apache.org>
> To: "James Users List" <se...@james.apache.org>
> Sent: Friday, November 13, 2009 1:24 AM
> Subject: Re: simple beginner question...
>
>
>> I think there is no need for aspecial mailet. Just Set the Mail from
>> and from headers to the senderaddress you want to use.
>>
>> Bye
>> norman
>> 2009/11/12, pady-geazy <pa...@geazy.com>:
>>>
>>>
>>> I have a requirement in my app as follows -
>>>
>>> 1. A user registers with my app, and registers an email address. ( "a at
>>> gmail dot com" )
>>>
>>> 2. The app sometimes has to send emails on behalf of the user.
>>>
>>> 3. I have James email server which accepts connections from "appdomain
>>> dot
>>> com".
>>>
>>> 4. In the above scenario, today, the app sends the email using the sender
>>> as
>>> "app at appdomain dot com"
>>>
>>> 5. But I would like James to process the email as the sender as "app at
>>> appdomain dot com" ( thus doing smtp auth ) but then forward the emails
>>> using the sender as "a at gmail dot com"
>>>
>>>
>>> Can this be done with a mailet ?
>>>
>>>
>>> Thanks
>>>
>>> pady
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: simple beginner question...
Posted by pady-geazy <pa...@geazy.com>.
Hi Norman,
Thanks for your reply. I tried setting the "from" address alone to my gmail
account. And tried to use my server ( with the credentials ) to send mail.
But it fails with this exception -
Here is the debug log output:
DEBUG SMTP: connected to host "mail.geazy.com", port: 25
EHLO padydev
250-PRABHA Hello padydev ...
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250-PIPELINING
250 ENHANCEDSTATUSCODES
DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN"
DEBUG SMTP: Found extension "AUTH=LOGIN", arg "PLAIN"
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP: Attempt to authenticate
AUTH LOGIN
...
..
...
235 Authentication Successful
DEBUG SMTP: use8bit false
MAIL FROM:<padysrini at gmail dot com>
250 2.1.0 Sender <padysrini at gmail dot com>OK
RCPT TO: <padysrini at hotmail dot com>
503 5.7.1 Incorrect Authentication for Specified Email Address
DEBUG SMTP: Invalid Addresses
DEBUG SMTP: "padysrini at hotmail dot com"<padysrini at hotmail dot com>
DEBUG SMTP: Sending failed because of invalid destination addresses
RSET
250 2.0.0 OK
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
Authentication for Specified Email Address
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1294)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:635)
at javax.mail.Transport.send0(Transport.java:189)
at javax.mail.Transport.send(Transport.java:118)
at org.apache.commons.mail.Email.sendMimeMessage(Email.java:1128)
at org.apache.commons.mail.Email.send(Email.java:1163)
at
com.geazy.frames.server.utils.ServerUtils.sendHtmlEmail(ServerUtils.java:151)
at com.geazy.frames.server.utils.ServerUtils.main(ServerUtils.java:296)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 503 5.7.1 Incorrect
Authentication for Specified Email Address
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1145)
... 7 more
QUIT
I use apache commons mail to send mail. Here is the code:
HtmlEmail email = new HtmlEmail();
email.setHostName(info.mailserver);
email.setAuthentication(info.username, info.password);
email.setSmtpPort(info.smtpport);
email.setFrom("padysrini at gmail dot com");
email.addTo("padysrini at hotmail dot com");
email.setSubject(subject);
email.setHtmlMsg(html);
email.setDebug(true);
email.send();
Thanks
pady
----- Original Message -----
From: "Norman Maurer" <no...@apache.org>
To: "James Users List" <se...@james.apache.org>
Sent: Friday, November 13, 2009 1:24 AM
Subject: Re: simple beginner question...
>I think there is no need for aspecial mailet. Just Set the Mail from
> and from headers to the senderaddress you want to use.
>
> Bye
> norman
> 2009/11/12, pady-geazy <pa...@geazy.com>:
>>
>>
>> I have a requirement in my app as follows -
>>
>> 1. A user registers with my app, and registers an email address. ( "a at
>> gmail dot com" )
>>
>> 2. The app sometimes has to send emails on behalf of the user.
>>
>> 3. I have James email server which accepts connections from "appdomain
>> dot
>> com".
>>
>> 4. In the above scenario, today, the app sends the email using the sender
>> as
>> "app at appdomain dot com"
>>
>> 5. But I would like James to process the email as the sender as "app at
>> appdomain dot com" ( thus doing smtp auth ) but then forward the emails
>> using the sender as "a at gmail dot com"
>>
>>
>> Can this be done with a mailet ?
>>
>>
>> Thanks
>>
>> pady
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
> For additional commands, e-mail: server-user-help@james.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org
Re: simple beginner question...
Posted by Norman Maurer <no...@apache.org>.
I think there is no need for aspecial mailet. Just Set the Mail from
and from headers to the senderaddress you want to use.
Bye
norman
2009/11/12, pady-geazy <pa...@geazy.com>:
>
>
> I have a requirement in my app as follows -
>
> 1. A user registers with my app, and registers an email address. ( "a at
> gmail dot com" )
>
> 2. The app sometimes has to send emails on behalf of the user.
>
> 3. I have James email server which accepts connections from "appdomain dot
> com".
>
> 4. In the above scenario, today, the app sends the email using the sender as
> "app at appdomain dot com"
>
> 5. But I would like James to process the email as the sender as "app at
> appdomain dot com" ( thus doing smtp auth ) but then forward the emails
> using the sender as "a at gmail dot com"
>
>
> Can this be done with a mailet ?
>
>
> Thanks
>
> pady
---------------------------------------------------------------------
To unsubscribe, e-mail: server-user-unsubscribe@james.apache.org
For additional commands, e-mail: server-user-help@james.apache.org