You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by Diego Spinola Castro <sp...@gmail.com> on 2012/06/14 16:26:38 UTC

CPU CAP XenServer

Hi, i found a issue and want know that it's a real issue.
I've  created a service offering with CPU CAP enabled and after deployment
i figured out that cap might be wrong.


Host: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz


Service Offering: 4 x 2.0 GHz


VM:        VCPUs-params (MRW): weight: 220; cap: 86
              VCPUs-max ( RW): 4
              VCPUs-at-startup ( RW): 4



http://support.citrix.com/article/CTX117960
"The cap is expressed in percentage of one physical CPU: 100 is one
physical CPU, 50 is half a CPU, 400 is 4 CPUs, and so on. The default, 0
(zero), means there is no upper cap."


I believe that cpu cap should be 344 instead 86.

Any thoughts?

Re: CPU CAP XenServer

Posted by Matthew Hartmann <mh...@tls.net>.
Anthony:

Not a problem! Thanks for looking into this. I'm always happy to report 
any issues I find to help make CloudStack the best product it can be!

Cheers,

Matthew

On 6/14/2012 8:42 PM, Anthony Xu wrote:
> Hi Matthew,
>
> We did some tests for this, and we found out the cap is per VM.
>
> Below link says weight was changed to per VCPU.
>
> http://blog.xen.org/index.php/2010/08/13/rfc-credit1-make-weight-per-vcpu/
>
> Thanks for bringing this up.
>
> Will fix this bug soon.
>
> Thanks,
> Anthony
>
>
>> -----Original Message-----
>> From: Anthony Xu [mailto:Xuefei.Xu@citrix.com]
>> Sent: Thursday, June 14, 2012 2:31 PM
>> To: cloudstack-dev@incubator.apache.org
>> Subject: RE: CPU CAP XenServer
>>
>> Hi Matthew,
>>
>> That's a very good question, thanks for bringing this up.
>> When we implemented cap/weight for XenServer, we thought cap/weight is
>> per VCPU not per VM.
>> If cap is wrong, then weight is also wrong.
>>
>> In all articles you referred to , they don't explicitly say if the
>> domain is a single VCPU domain or a SMP domain.
>>
>> By default, the weight is 256.  If weight is per domain/VM,  4VCPU VM
>> should get the same CPU cycle as 1VCPU VM, because they have same
>> weight 256.
>> It doesn't make any sense to me, so we thought cap/weight is per VCPU.
>>
>> I'll get back to you soon with definite answer.
>>
>> Anthony
>>
>>
>>
>>
>>> -----Original Message-----
>>> From: Matthew Hartmann [mailto:mhartmann@tls.net]
>>> Sent: Thursday, June 14, 2012 7:33 AM
>>> To: cloudstack-dev@incubator.apache.org
>>> Subject: Re: CPU CAP XenServer
>>>
>>> Hello:
>>>
>>> I reported this issue as a bug way back when 2.2.13 was released and
>> it
>>> has yet to be resolved. It still exists as a bug even in 3.0.2.
>>>
>>> http://bugs.cloudstack.org/browse/CS-12972
>>>
>>> Please feel free to submit your comments to the bug report.
>>>
>>> Cheers,
>>>
>>> Matthew
>>>
>>>
>>> On 6/14/2012 10:26 AM, Diego Spinola Castro wrote:
>>>> Hi, i found a issue and want know that it's a real issue.
>>>> I've  created a service offering with CPU CAP enabled and after
>>> deployment
>>>> i figured out that cap might be wrong.
>>>>
>>>>
>>>> Host: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz
>>>>
>>>>
>>>> Service Offering: 4 x 2.0 GHz
>>>>
>>>>
>>>> VM:        VCPUs-params (MRW): weight: 220; cap: 86
>>>>                 VCPUs-max ( RW): 4
>>>>                 VCPUs-at-startup ( RW): 4
>>>>
>>>>
>>>>
>>>> http://support.citrix.com/article/CTX117960
>>>> "The cap is expressed in percentage of one physical CPU: 100 is one
>>>> physical CPU, 50 is half a CPU, 400 is 4 CPUs, and so on. The
>> default,
>>> 0
>>>> (zero), means there is no upper cap."
>>>>
>>>>
>>>> I believe that cpu cap should be 344 instead 86.
>>>>
>>>> Any thoughts?
>>>>
>
>


RE: CPU CAP XenServer

Posted by Anthony Xu <Xu...@citrix.com>.
Hi Matthew,

We did some tests for this, and we found out the cap is per VM.

Below link says weight was changed to per VCPU.

http://blog.xen.org/index.php/2010/08/13/rfc-credit1-make-weight-per-vcpu/

Thanks for bringing this up.

Will fix this bug soon.

Thanks,
Anthony


> -----Original Message-----
> From: Anthony Xu [mailto:Xuefei.Xu@citrix.com]
> Sent: Thursday, June 14, 2012 2:31 PM
> To: cloudstack-dev@incubator.apache.org
> Subject: RE: CPU CAP XenServer
> 
> Hi Matthew,
> 
> That's a very good question, thanks for bringing this up.
> When we implemented cap/weight for XenServer, we thought cap/weight is
> per VCPU not per VM.
> If cap is wrong, then weight is also wrong.
> 
> In all articles you referred to , they don't explicitly say if the
> domain is a single VCPU domain or a SMP domain.
> 
> By default, the weight is 256.  If weight is per domain/VM,  4VCPU VM
> should get the same CPU cycle as 1VCPU VM, because they have same
> weight 256.
> It doesn't make any sense to me, so we thought cap/weight is per VCPU.
> 
> I'll get back to you soon with definite answer.
> 
> Anthony
> 
> 
> 
> 
> > -----Original Message-----
> > From: Matthew Hartmann [mailto:mhartmann@tls.net]
> > Sent: Thursday, June 14, 2012 7:33 AM
> > To: cloudstack-dev@incubator.apache.org
> > Subject: Re: CPU CAP XenServer
> >
> > Hello:
> >
> > I reported this issue as a bug way back when 2.2.13 was released and
> it
> > has yet to be resolved. It still exists as a bug even in 3.0.2.
> >
> > http://bugs.cloudstack.org/browse/CS-12972
> >
> > Please feel free to submit your comments to the bug report.
> >
> > Cheers,
> >
> > Matthew
> >
> >
> > On 6/14/2012 10:26 AM, Diego Spinola Castro wrote:
> > > Hi, i found a issue and want know that it's a real issue.
> > > I've  created a service offering with CPU CAP enabled and after
> > deployment
> > > i figured out that cap might be wrong.
> > >
> > >
> > > Host: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz
> > >
> > >
> > > Service Offering: 4 x 2.0 GHz
> > >
> > >
> > > VM:        VCPUs-params (MRW): weight: 220; cap: 86
> > >                VCPUs-max ( RW): 4
> > >                VCPUs-at-startup ( RW): 4
> > >
> > >
> > >
> > > http://support.citrix.com/article/CTX117960
> > > "The cap is expressed in percentage of one physical CPU: 100 is one
> > > physical CPU, 50 is half a CPU, 400 is 4 CPUs, and so on. The
> default,
> > 0
> > > (zero), means there is no upper cap."
> > >
> > >
> > > I believe that cpu cap should be 344 instead 86.
> > >
> > > Any thoughts?
> > >


RE: CPU CAP XenServer

Posted by Anthony Xu <Xu...@citrix.com>.
Hi Matthew,

That's a very good question, thanks for bringing this up.
When we implemented cap/weight for XenServer, we thought cap/weight is per VCPU not per VM.
If cap is wrong, then weight is also wrong.

In all articles you referred to , they don't explicitly say if the domain is a single VCPU domain or a SMP domain.

By default, the weight is 256.  If weight is per domain/VM,  4VCPU VM should get the same CPU cycle as 1VCPU VM, because they have same weight 256.
It doesn't make any sense to me, so we thought cap/weight is per VCPU.

I'll get back to you soon with definite answer.

Anthony




> -----Original Message-----
> From: Matthew Hartmann [mailto:mhartmann@tls.net]
> Sent: Thursday, June 14, 2012 7:33 AM
> To: cloudstack-dev@incubator.apache.org
> Subject: Re: CPU CAP XenServer
> 
> Hello:
> 
> I reported this issue as a bug way back when 2.2.13 was released and it
> has yet to be resolved. It still exists as a bug even in 3.0.2.
> 
> http://bugs.cloudstack.org/browse/CS-12972
> 
> Please feel free to submit your comments to the bug report.
> 
> Cheers,
> 
> Matthew
> 
> 
> On 6/14/2012 10:26 AM, Diego Spinola Castro wrote:
> > Hi, i found a issue and want know that it's a real issue.
> > I've  created a service offering with CPU CAP enabled and after
> deployment
> > i figured out that cap might be wrong.
> >
> >
> > Host: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz
> >
> >
> > Service Offering: 4 x 2.0 GHz
> >
> >
> > VM:        VCPUs-params (MRW): weight: 220; cap: 86
> >                VCPUs-max ( RW): 4
> >                VCPUs-at-startup ( RW): 4
> >
> >
> >
> > http://support.citrix.com/article/CTX117960
> > "The cap is expressed in percentage of one physical CPU: 100 is one
> > physical CPU, 50 is half a CPU, 400 is 4 CPUs, and so on. The default,
> 0
> > (zero), means there is no upper cap."
> >
> >
> > I believe that cpu cap should be 344 instead 86.
> >
> > Any thoughts?
> >


Re: CPU CAP XenServer

Posted by Matthew Hartmann <mh...@tls.net>.
Hello:

I reported this issue as a bug way back when 2.2.13 was released and it 
has yet to be resolved. It still exists as a bug even in 3.0.2.

http://bugs.cloudstack.org/browse/CS-12972

Please feel free to submit your comments to the bug report.

Cheers,

Matthew


On 6/14/2012 10:26 AM, Diego Spinola Castro wrote:
> Hi, i found a issue and want know that it's a real issue.
> I've  created a service offering with CPU CAP enabled and after deployment
> i figured out that cap might be wrong.
>
>
> Host: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz
>
>
> Service Offering: 4 x 2.0 GHz
>
>
> VM:        VCPUs-params (MRW): weight: 220; cap: 86
>                VCPUs-max ( RW): 4
>                VCPUs-at-startup ( RW): 4
>
>
>
> http://support.citrix.com/article/CTX117960
> "The cap is expressed in percentage of one physical CPU: 100 is one
> physical CPU, 50 is half a CPU, 400 is 4 CPUs, and so on. The default, 0
> (zero), means there is no upper cap."
>
>
> I believe that cpu cap should be 344 instead 86.
>
> Any thoughts?
>