You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@ofbiz.apache.org by James Lawton <ja...@tofinosoftware.com> on 2010/11/09 17:53:27 UTC
Credit hold flag
When placing an order is it possible for a user to check if the party
placing the order has a credit hold flag applied or some other mechanism to
say that nothing should be accepted from that party until they pay their
bills?
I have tried creating a new Party Group and a billing account for that Party
Group and gave it a $0 credit limit. When creating an order nothing pops up
to say that that the credit limit has been exceeded. Nor is the billing
account showing up for the Party Group when viewing it through the Party
Manager entry.
I must be doing something wrong or looking at this the wrong way
Any thoughts or directions appreciated
Thanks
James
RE: Credit hold flag
Posted by James Lawton <ja...@tofinosoftware.com>.
OK, got it...I had missed the additional drill down on the party ID in
Billing accounts to get the available balance info
Thanks
James
-----Original Message-----
From: BJ Freeman [mailto:bjfree@free-man.net]
Sent: November-09-10 12:59 PM
To: user@ofbiz.apache.org
Subject: Re: Credit hold flag
the data is available if you wish to provide that through the Order Entry.
You can go into the Partymgr
https://demo-trunk.ofbiz.apache.org/partymgr/control/viewprofile?partyId=Dem
oCustomer
click on Finacial Account
and Billing Account
and get that parties info.
=========================
BJ Freeman
Strategic Power Office with Supplier Automation
<http://www.businessesnetwork.com/automation/viewforum.php?f=52>
Specialtymarket.com <http://www.specialtymarket.com/> Systems Integrator--
Glad to Assist
Chat Y! messenger: bjfr33man
James Lawton sent the following on 11/9/2010 9:46 AM:
> So there is no way for the sales person to know ahead of placing the
> order that there is a hold on the account? He just has to try placing the
order?
>
> At what point in the order process will it stop?
>
> Thanks
> James
>
> -----Original Message-----
> From: BJ Freeman [mailto:bjfree@free-man.net]
> Sent: November-09-10 12:34 PM
> To: user@ofbiz.apache.org
> Subject: Re: Credit hold flag
>
> when the order uses CC this is automatic.
> for Accounts also will not let a order happen if the account does not
> have enough to cover the order.
>
> =========================
> BJ Freeman
> Strategic Power Office with Supplier Automation
> <http://www.businessesnetwork.com/automation/viewforum.php?f=52>
> Specialtymarket.com<http://www.specialtymarket.com/> Systems
> Integrator-- Glad to Assist
>
> Chat Y! messenger: bjfr33man
>
>
> James Lawton sent the following on 11/9/2010 8:53 AM:
>> When placing an order is it possible for a user to check if the party
>> placing the order has a credit hold flag applied or some other
>> mechanism to say that nothing should be accepted from that party
>> until they pay their bills?
>>
>>
>>
>> I have tried creating a new Party Group and a billing account for
>> that Party Group and gave it a $0 credit limit. When creating an
>> order nothing pops up to say that that the credit limit has been
exceeded.
>> Nor is the billing account showing up for the Party Group when
>> viewing it through the Party Manager entry.
>>
>>
>>
>> I must be doing something wrong or looking at this the wrong way
>>
>>
>>
>> Any thoughts or directions appreciated
>>
>>
>>
>> Thanks
>>
>> James
>>
>>
>
>
>
Re: Credit hold flag
Posted by BJ Freeman <bj...@free-man.net>.
the data is available if you wish to provide that through the Order Entry.
You can go into the Partymgr
https://demo-trunk.ofbiz.apache.org/partymgr/control/viewprofile?partyId=DemoCustomer
click on Finacial Account
and Billing Account
and get that parties info.
=========================
BJ Freeman
Strategic Power Office with Supplier Automation <http://www.businessesnetwork.com/automation/viewforum.php?f=52>
Specialtymarket.com <http://www.specialtymarket.com/>
Systems Integrator-- Glad to Assist
Chat Y! messenger: bjfr33man
James Lawton sent the following on 11/9/2010 9:46 AM:
> So there is no way for the sales person to know ahead of placing the order
> that there is a hold on the account? He just has to try placing the order?
>
> At what point in the order process will it stop?
>
> Thanks
> James
>
> -----Original Message-----
> From: BJ Freeman [mailto:bjfree@free-man.net]
> Sent: November-09-10 12:34 PM
> To: user@ofbiz.apache.org
> Subject: Re: Credit hold flag
>
> when the order uses CC this is automatic.
> for Accounts also will not let a order happen if the account does not have
> enough to cover the order.
>
> =========================
> BJ Freeman
> Strategic Power Office with Supplier Automation
> <http://www.businessesnetwork.com/automation/viewforum.php?f=52>
> Specialtymarket.com<http://www.specialtymarket.com/> Systems Integrator--
> Glad to Assist
>
> Chat Y! messenger: bjfr33man
>
>
> James Lawton sent the following on 11/9/2010 8:53 AM:
>> When placing an order is it possible for a user to check if the party
>> placing the order has a credit hold flag applied or some other
>> mechanism to say that nothing should be accepted from that party until
>> they pay their bills?
>>
>>
>>
>> I have tried creating a new Party Group and a billing account for that
>> Party Group and gave it a $0 credit limit. When creating an order
>> nothing pops up to say that that the credit limit has been exceeded.
>> Nor is the billing account showing up for the Party Group when viewing
>> it through the Party Manager entry.
>>
>>
>>
>> I must be doing something wrong or looking at this the wrong way
>>
>>
>>
>> Any thoughts or directions appreciated
>>
>>
>>
>> Thanks
>>
>> James
>>
>>
>
>
>
RE: Credit hold flag
Posted by James Lawton <ja...@tofinosoftware.com>.
So there is no way for the sales person to know ahead of placing the order
that there is a hold on the account? He just has to try placing the order?
At what point in the order process will it stop?
Thanks
James
-----Original Message-----
From: BJ Freeman [mailto:bjfree@free-man.net]
Sent: November-09-10 12:34 PM
To: user@ofbiz.apache.org
Subject: Re: Credit hold flag
when the order uses CC this is automatic.
for Accounts also will not let a order happen if the account does not have
enough to cover the order.
=========================
BJ Freeman
Strategic Power Office with Supplier Automation
<http://www.businessesnetwork.com/automation/viewforum.php?f=52>
Specialtymarket.com <http://www.specialtymarket.com/> Systems Integrator--
Glad to Assist
Chat Y! messenger: bjfr33man
James Lawton sent the following on 11/9/2010 8:53 AM:
> When placing an order is it possible for a user to check if the party
> placing the order has a credit hold flag applied or some other
> mechanism to say that nothing should be accepted from that party until
> they pay their bills?
>
>
>
> I have tried creating a new Party Group and a billing account for that
> Party Group and gave it a $0 credit limit. When creating an order
> nothing pops up to say that that the credit limit has been exceeded.
> Nor is the billing account showing up for the Party Group when viewing
> it through the Party Manager entry.
>
>
>
> I must be doing something wrong or looking at this the wrong way
>
>
>
> Any thoughts or directions appreciated
>
>
>
> Thanks
>
> James
>
>
Re: Credit hold flag
Posted by BJ Freeman <bj...@free-man.net>.
when the order uses CC this is automatic.
for Accounts also will not let a order happen if the account does not
have enough to cover the order.
=========================
BJ Freeman
Strategic Power Office with Supplier Automation <http://www.businessesnetwork.com/automation/viewforum.php?f=52>
Specialtymarket.com <http://www.specialtymarket.com/>
Systems Integrator-- Glad to Assist
Chat Y! messenger: bjfr33man
James Lawton sent the following on 11/9/2010 8:53 AM:
> When placing an order is it possible for a user to check if the party
> placing the order has a credit hold flag applied or some other mechanism to
> say that nothing should be accepted from that party until they pay their
> bills?
>
>
>
> I have tried creating a new Party Group and a billing account for that Party
> Group and gave it a $0 credit limit. When creating an order nothing pops up
> to say that that the credit limit has been exceeded. Nor is the billing
> account showing up for the Party Group when viewing it through the Party
> Manager entry.
>
>
>
> I must be doing something wrong or looking at this the wrong way
>
>
>
> Any thoughts or directions appreciated
>
>
>
> Thanks
>
> James
>
>