You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@perl.apache.org by Stas Bekman <st...@stason.org> on 2003/06/04 07:38:18 UTC
[mp1] failed modules/module
blead-perl w/o ithreads fails modules/module.t with this error:
[Wed Jun 4 15:34:41 2003] [error] Can't locate
auto/Apache/Module/top_module.al in @INC (@INC contains:
/home/stas/apache.org/modperl/blib/lib /home/stas/apache.org/modperl/blib/arch
/home/stas/apache.org/modperl/t/docs
/home/stas/perl/blead/lib/5.9.0/i686-linux /home/stas/perl/blead/lib/5.9.0
/home/stas/perl/blead/lib/site_perl/5.9.0/i686-linux
/home/stas/perl/blead/lib/site_perl/5.9.0 /home/stas/perl/blead/lib/site_perl
/home/stas/apache.org/modperl/t/ /home/stas/apache.org/modperl/t/lib/perl) at
/home/stas/apache.org/modperl/t/net/perl/module.pl line 20
also here we advise to use t/TEST but its shebang line could be wrong (if
/usr/local/bin/perl wasn't used).
http://perl.apache.org/docs/1.0/guide/install.html#Manual_Testing
Would be nice to adjust t/TEST to use the right perl path
the test works ok with ithreads-enabled perl
Here is some more info:
~/perl/blead/bin/perl Makefile.PL APACHE_SRC=../apache-1.3/src \
DO_HTTPD=1 USE_APACI=1 EVERYTHING=1 \
APACHE_PREFIX=/home/httpd/httpd_perl \
APACI_ARGS='--prefix=/home/httpd/httpd_perl --enable-module=info \
--enable-module=rewrite --enable-module=proxy \
--without-execstrip' \
PERL_TRACE=1 PERL_DEBUG=1 PERL_MARK_WHERE=1
~/perl/blead/bin/perl -V
Summary of my perl5 (revision 5.0 version 9 subversion 0 patch 19226)
configuration:
Platform:
osname=linux, osvers=2.4.19-16mdksmp, archname=i686-linux
uname='linux hope.stason.org 2.4.19-16mdksmp #1 smp fri sep 20 16:08:37
cest 2002 i686 unknown unknown gnulinux '
config_args='-des -Dprefix=/home/stas/perl/blead -Doptimize=-g
-Duseshrplib -Dusedevel -DDEBUG_LEAKING_SCALARS'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-g',
cppflags='-DDEBUGGING -fno-strict-aliasing -I/usr/include/gdbm'
ccversion='', gccversion='3.2 (Mandrake Linux 9.0 3.2-1mdk)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lc -lcrypt -lutil -lrt
perllibs=-lnsl -ldl -lm -lc -lcrypt -lutil -lrt
libc=/lib/libc-2.3.1.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic
-Wl,-rpath,/home/stas/perl/blead/lib/5.9.0/i686-linux/CORE'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: DEBUGGING USE_LARGE_FILES
Locally applied patches:
DEVEL18374
Built under linux
Compiled at Apr 17 2003 13:58:42
@INC:
/home/stas/perl/blead/lib/5.9.0/i686-linux
/home/stas/perl/blead/lib/5.9.0
/home/stas/perl/blead/lib/site_perl/5.9.0/i686-linux
/home/stas/perl/blead/lib/site_perl/5.9.0
/home/stas/perl/blead/lib/site_perl
.
__________________________________________________________________
Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
http://stason.org/ mod_perl Guide ---> http://perl.apache.org
mailto:stas@stason.org http://use.perl.org http://apacheweek.com
http://modperlbook.org http://apache.org http://ticketmaster.com
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: [mp1] failed modules/module
Posted by "Philippe M. Chiasson" <go...@cpan.org>.
On Thu, 2003-06-05 at 09:42, Stas Bekman wrote:
> Philippe M. Chiasson wrote:
> > On Wed, 2003-06-04 at 13:38, Stas Bekman wrote:
> >
> >>blead-perl w/o ithreads fails modules/module.t with this error:
> >>
> >>[Wed Jun 4 15:34:41 2003] [error] Can't locate
> >>auto/Apache/Module/top_module.al in @INC (@INC contains:
> >>/home/stas/apache.org/modperl/blib/lib /home/stas/apache.org/modperl/blib/arch
> >>/home/stas/apache.org/modperl/t/docs
> >>/home/stas/perl/blead/lib/5.9.0/i686-linux /home/stas/perl/blead/lib/5.9.0
> >>/home/stas/perl/blead/lib/site_perl/5.9.0/i686-linux
> >>/home/stas/perl/blead/lib/site_perl/5.9.0 /home/stas/perl/blead/lib/site_perl
> >>/home/stas/apache.org/modperl/t/ /home/stas/apache.org/modperl/t/lib/perl) at
> >>/home/stas/apache.org/modperl/t/net/perl/module.pl line 20
> >
> >
> > Can't reproduce that one ;-(
> >
> > Your test are possibly grabbign an version of Apache::Module compiled
> > with a previous (incompatible MMN) or something
> >
> > $> perl -MApache::Module -e'print $INC{"Apache/Module.pm"}'
> >
> > I just dumped Apache-Module-0.11 in my mod_perl build directory and it
> > got picked up and all tests passed fine, with this simple (yet odd)
> > patch:
>
> oh, you mean you were running 'make test' and having all those skipped and you
> considered them as passed? that sounds like a bad idea.
Quite the contrary, actually ;-) I've placed most of those modules,
Apache-Sandwidch, Apache-Module, into my mp1 directory. That way, perl
Makefile.PL picks them up and the test suite picks those modules up, and
not whatever I might have installed system wide.
So, it allows me to DO test those when I make test.
> > diff -u -I$Id -r1.28 src.pm
> > --- lib/Apache/src.pm 9 Jul 2001 15:03:13 -0000 1.28
> > +++ lib/Apache/src.pm 4 Jun 2003 07:16:47 -0000
> > @@ -94,7 +94,7 @@
> > # return 1 if $Is_Win32; #just assume, till Apache::src works under
> > win32
> > my $instsrc;
> > {
> > - local @INC = grep { !/blib/ } @INC;
> > + #local @INC = grep { !/blib/ } @INC;
> > my $instdir;
> > for (@INC) {
> > last if -d ($instdir = "$_/auto/Apache/include");
> >
> >
> > Can you check for something like that, otherwise I can't reproduce that
> > problem with your setup.
>
> With your t/TEST patch below and reinstalled Apache::Module it seems to go away.
>
> >>also here we advise to use t/TEST but its shebang line could be wrong (if
> >>/usr/local/bin/perl wasn't used).
> >>http://perl.apache.org/docs/1.0/guide/install.html#Manual_Testing
> >>Would be nice to adjust t/TEST to use the right perl path
> >
> >
> > Like this?
>
> +1, we want it in!
Done!
>
> > Index: MANIFEST
> > ===================================================================
> > RCS file: /home/cvs/modperl/MANIFEST,v
> > retrieving revision 1.71
> > diff -u -I$Id -r1.71 MANIFEST
> > --- MANIFEST 25 May 2003 10:54:06 -0000 1.71
> > +++ MANIFEST 4 Jun 2003 07:21:25 -0000
> > @@ -98,7 +98,7 @@
> > src/opcodes.txt
> > t/report.PL
> > t/README
> > -t/TEST
> > +t/TEST.PL
> > t/TEST.win32
> > t/conf/httpd.conf.pl
> > t/conf/httpd.conf-dist
> > Index: Makefile.PL
> > ===================================================================
> > RCS file: /home/cvs/modperl/Makefile.PL,v
> > retrieving revision 1.211
> > diff -u -I$Id -r1.211 Makefile.PL
> > --- Makefile.PL 16 May 2003 13:26:38 -0000 1.211
> > +++ Makefile.PL 4 Jun 2003 07:21:26 -0000
> > @@ -148,6 +148,7 @@
> > src/modules/perl/mod_perl_version.h
> > t/net/perl/cgi.pl
> > t/report
> > + t/TEST
> > t/httpd
> > apaci/find_source
> > apaci/apxs_cflags
> > @@ -166,6 +167,7 @@
> >
> > gen_script("t/net/perl/cgi.pl");
> > gen_script("t/report");
> > +gen_script("t/TEST");
> > gen_script("apaci/find_source");
> > gen_script("apaci/apxs_cflags");
> > gen_script("apaci/perl_config", "$PWD/lib");
> > Index: t/.cvsignore
> > ===================================================================
> > RCS file: /home/cvs/modperl/t/.cvsignore,v
> > retrieving revision 1.3
> > diff -u -I$Id -r1.3 .cvsignore
> > --- t/.cvsignore 9 Jun 1998 16:53:09 -0000 1.3
> > +++ t/.cvsignore 4 Jun 2003 07:21:26 -0000
> > @@ -1,4 +1,5 @@
> > report
> > +TEST
> > logs
> > httpd.conf
> > httpd.conf.old
> >
> > And rename t/TEST to t/TEST.PL
> >
> > Works fine for me and is nicely autogenerated. +1 ?
>
> +1, absolutely!
Done!
> __________________________________________________________________
> Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
> http://stason.org/ mod_perl Guide ---> http://perl.apache.org
> mailto:stas@stason.org http://use.perl.org http://apacheweek.com
> http://modperlbook.org http://apache.org http://ticketmaster.com
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
> For additional commands, e-mail: dev-help@perl.apache.org
--
-- -----------------------------------------------------------------------------
Philippe M. Chiasson /gozer\@(cpan|ectoplasm)\.org/ 88C3A5A5 (122FF51B/C634E37B)
http://gozer.ectoplasm.org/ F9BF E0C2 480E 7680 1AE5 3631 CB32 A107 88C3 A5A5
Q: It is impossible to make anything foolproof because fools are so ingenious.
perl -e'$$=\${gozer};{$_=unpack(P7,pack(L,$$));/^JAm_pH\n$/&&print||$$++&&redo}'
Re: [mp1] failed modules/module
Posted by Stas Bekman <st...@stason.org>.
Philippe M. Chiasson wrote:
> On Wed, 2003-06-04 at 13:38, Stas Bekman wrote:
>
>>blead-perl w/o ithreads fails modules/module.t with this error:
>>
>>[Wed Jun 4 15:34:41 2003] [error] Can't locate
>>auto/Apache/Module/top_module.al in @INC (@INC contains:
>>/home/stas/apache.org/modperl/blib/lib /home/stas/apache.org/modperl/blib/arch
>>/home/stas/apache.org/modperl/t/docs
>>/home/stas/perl/blead/lib/5.9.0/i686-linux /home/stas/perl/blead/lib/5.9.0
>>/home/stas/perl/blead/lib/site_perl/5.9.0/i686-linux
>>/home/stas/perl/blead/lib/site_perl/5.9.0 /home/stas/perl/blead/lib/site_perl
>>/home/stas/apache.org/modperl/t/ /home/stas/apache.org/modperl/t/lib/perl) at
>>/home/stas/apache.org/modperl/t/net/perl/module.pl line 20
>
>
> Can't reproduce that one ;-(
>
> Your test are possibly grabbign an version of Apache::Module compiled
> with a previous (incompatible MMN) or something
>
> $> perl -MApache::Module -e'print $INC{"Apache/Module.pm"}'
>
> I just dumped Apache-Module-0.11 in my mod_perl build directory and it
> got picked up and all tests passed fine, with this simple (yet odd)
> patch:
oh, you mean you were running 'make test' and having all those skipped and you
considered them as passed? that sounds like a bad idea.
> diff -u -I$Id -r1.28 src.pm
> --- lib/Apache/src.pm 9 Jul 2001 15:03:13 -0000 1.28
> +++ lib/Apache/src.pm 4 Jun 2003 07:16:47 -0000
> @@ -94,7 +94,7 @@
> # return 1 if $Is_Win32; #just assume, till Apache::src works under
> win32
> my $instsrc;
> {
> - local @INC = grep { !/blib/ } @INC;
> + #local @INC = grep { !/blib/ } @INC;
> my $instdir;
> for (@INC) {
> last if -d ($instdir = "$_/auto/Apache/include");
>
>
> Can you check for something like that, otherwise I can't reproduce that
> problem with your setup.
With your t/TEST patch below and reinstalled Apache::Module it seems to go away.
>>also here we advise to use t/TEST but its shebang line could be wrong (if
>>/usr/local/bin/perl wasn't used).
>>http://perl.apache.org/docs/1.0/guide/install.html#Manual_Testing
>>Would be nice to adjust t/TEST to use the right perl path
>
>
> Like this?
+1, we want it in!
> Index: MANIFEST
> ===================================================================
> RCS file: /home/cvs/modperl/MANIFEST,v
> retrieving revision 1.71
> diff -u -I$Id -r1.71 MANIFEST
> --- MANIFEST 25 May 2003 10:54:06 -0000 1.71
> +++ MANIFEST 4 Jun 2003 07:21:25 -0000
> @@ -98,7 +98,7 @@
> src/opcodes.txt
> t/report.PL
> t/README
> -t/TEST
> +t/TEST.PL
> t/TEST.win32
> t/conf/httpd.conf.pl
> t/conf/httpd.conf-dist
> Index: Makefile.PL
> ===================================================================
> RCS file: /home/cvs/modperl/Makefile.PL,v
> retrieving revision 1.211
> diff -u -I$Id -r1.211 Makefile.PL
> --- Makefile.PL 16 May 2003 13:26:38 -0000 1.211
> +++ Makefile.PL 4 Jun 2003 07:21:26 -0000
> @@ -148,6 +148,7 @@
> src/modules/perl/mod_perl_version.h
> t/net/perl/cgi.pl
> t/report
> + t/TEST
> t/httpd
> apaci/find_source
> apaci/apxs_cflags
> @@ -166,6 +167,7 @@
>
> gen_script("t/net/perl/cgi.pl");
> gen_script("t/report");
> +gen_script("t/TEST");
> gen_script("apaci/find_source");
> gen_script("apaci/apxs_cflags");
> gen_script("apaci/perl_config", "$PWD/lib");
> Index: t/.cvsignore
> ===================================================================
> RCS file: /home/cvs/modperl/t/.cvsignore,v
> retrieving revision 1.3
> diff -u -I$Id -r1.3 .cvsignore
> --- t/.cvsignore 9 Jun 1998 16:53:09 -0000 1.3
> +++ t/.cvsignore 4 Jun 2003 07:21:26 -0000
> @@ -1,4 +1,5 @@
> report
> +TEST
> logs
> httpd.conf
> httpd.conf.old
>
> And rename t/TEST to t/TEST.PL
>
> Works fine for me and is nicely autogenerated. +1 ?
+1, absolutely!
__________________________________________________________________
Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
http://stason.org/ mod_perl Guide ---> http://perl.apache.org
mailto:stas@stason.org http://use.perl.org http://apacheweek.com
http://modperlbook.org http://apache.org http://ticketmaster.com
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
For additional commands, e-mail: dev-help@perl.apache.org
Re: [mp1] failed modules/module
Posted by "Philippe M. Chiasson" <go...@cpan.org>.
On Wed, 2003-06-04 at 13:38, Stas Bekman wrote:
> blead-perl w/o ithreads fails modules/module.t with this error:
>
> [Wed Jun 4 15:34:41 2003] [error] Can't locate
> auto/Apache/Module/top_module.al in @INC (@INC contains:
> /home/stas/apache.org/modperl/blib/lib /home/stas/apache.org/modperl/blib/arch
> /home/stas/apache.org/modperl/t/docs
> /home/stas/perl/blead/lib/5.9.0/i686-linux /home/stas/perl/blead/lib/5.9.0
> /home/stas/perl/blead/lib/site_perl/5.9.0/i686-linux
> /home/stas/perl/blead/lib/site_perl/5.9.0 /home/stas/perl/blead/lib/site_perl
> /home/stas/apache.org/modperl/t/ /home/stas/apache.org/modperl/t/lib/perl) at
> /home/stas/apache.org/modperl/t/net/perl/module.pl line 20
Can't reproduce that one ;-(
Your test are possibly grabbign an version of Apache::Module compiled
with a previous (incompatible MMN) or something
$> perl -MApache::Module -e'print $INC{"Apache/Module.pm"}'
I just dumped Apache-Module-0.11 in my mod_perl build directory and it
got picked up and all tests passed fine, with this simple (yet odd)
patch:
diff -u -I$Id -r1.28 src.pm
--- lib/Apache/src.pm 9 Jul 2001 15:03:13 -0000 1.28
+++ lib/Apache/src.pm 4 Jun 2003 07:16:47 -0000
@@ -94,7 +94,7 @@
# return 1 if $Is_Win32; #just assume, till Apache::src works under
win32
my $instsrc;
{
- local @INC = grep { !/blib/ } @INC;
+ #local @INC = grep { !/blib/ } @INC;
my $instdir;
for (@INC) {
last if -d ($instdir = "$_/auto/Apache/include");
Can you check for something like that, otherwise I can't reproduce that
problem with your setup.
> also here we advise to use t/TEST but its shebang line could be wrong (if
> /usr/local/bin/perl wasn't used).
> http://perl.apache.org/docs/1.0/guide/install.html#Manual_Testing
> Would be nice to adjust t/TEST to use the right perl path
Like this?
Index: MANIFEST
===================================================================
RCS file: /home/cvs/modperl/MANIFEST,v
retrieving revision 1.71
diff -u -I$Id -r1.71 MANIFEST
--- MANIFEST 25 May 2003 10:54:06 -0000 1.71
+++ MANIFEST 4 Jun 2003 07:21:25 -0000
@@ -98,7 +98,7 @@
src/opcodes.txt
t/report.PL
t/README
-t/TEST
+t/TEST.PL
t/TEST.win32
t/conf/httpd.conf.pl
t/conf/httpd.conf-dist
Index: Makefile.PL
===================================================================
RCS file: /home/cvs/modperl/Makefile.PL,v
retrieving revision 1.211
diff -u -I$Id -r1.211 Makefile.PL
--- Makefile.PL 16 May 2003 13:26:38 -0000 1.211
+++ Makefile.PL 4 Jun 2003 07:21:26 -0000
@@ -148,6 +148,7 @@
src/modules/perl/mod_perl_version.h
t/net/perl/cgi.pl
t/report
+ t/TEST
t/httpd
apaci/find_source
apaci/apxs_cflags
@@ -166,6 +167,7 @@
gen_script("t/net/perl/cgi.pl");
gen_script("t/report");
+gen_script("t/TEST");
gen_script("apaci/find_source");
gen_script("apaci/apxs_cflags");
gen_script("apaci/perl_config", "$PWD/lib");
Index: t/.cvsignore
===================================================================
RCS file: /home/cvs/modperl/t/.cvsignore,v
retrieving revision 1.3
diff -u -I$Id -r1.3 .cvsignore
--- t/.cvsignore 9 Jun 1998 16:53:09 -0000 1.3
+++ t/.cvsignore 4 Jun 2003 07:21:26 -0000
@@ -1,4 +1,5 @@
report
+TEST
logs
httpd.conf
httpd.conf.old
And rename t/TEST to t/TEST.PL
Works fine for me and is nicely autogenerated. +1 ?
> the test works ok with ithreads-enabled perl
>
> Here is some more info:
>
> ~/perl/blead/bin/perl Makefile.PL APACHE_SRC=../apache-1.3/src \
> DO_HTTPD=1 USE_APACI=1 EVERYTHING=1 \
> APACHE_PREFIX=/home/httpd/httpd_perl \
> APACI_ARGS='--prefix=/home/httpd/httpd_perl --enable-module=info \
> --enable-module=rewrite --enable-module=proxy \
> --without-execstrip' \
> PERL_TRACE=1 PERL_DEBUG=1 PERL_MARK_WHERE=1
>
>
> ~/perl/blead/bin/perl -V
> Summary of my perl5 (revision 5.0 version 9 subversion 0 patch 19226)
> configuration:
> Platform:
> osname=linux, osvers=2.4.19-16mdksmp, archname=i686-linux
> uname='linux hope.stason.org 2.4.19-16mdksmp #1 smp fri sep 20 16:08:37
> cest 2002 i686 unknown unknown gnulinux '
> config_args='-des -Dprefix=/home/stas/perl/blead -Doptimize=-g
> -Duseshrplib -Dusedevel -DDEBUG_LEAKING_SCALARS'
> hint=recommended, useposix=true, d_sigaction=define
> usethreads=undef useithreads=undef usemultiplicity=undef
> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
> use64bitint=undef use64bitall=undef uselongdouble=undef
> usemymalloc=n, bincompat5005=undef
> Compiler:
> cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
> optimize='-g',
> cppflags='-DDEBUGGING -fno-strict-aliasing -I/usr/include/gdbm'
> ccversion='', gccversion='3.2 (Mandrake Linux 9.0 3.2-1mdk)', gccosandvers=''
> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
> ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
> lseeksize=8
> alignbytes=4, prototype=define
> Linker and Libraries:
> ld='cc', ldflags =' -L/usr/local/lib'
> libpth=/usr/local/lib /lib /usr/lib
> libs=-lnsl -lgdbm -ldb -ldl -lm -lc -lcrypt -lutil -lrt
> perllibs=-lnsl -ldl -lm -lc -lcrypt -lutil -lrt
> libc=/lib/libc-2.3.1.so, so=so, useshrplib=true, libperl=libperl.so
> gnulibc_version='2.3.1'
> Dynamic Linking:
> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic
> -Wl,-rpath,/home/stas/perl/blead/lib/5.9.0/i686-linux/CORE'
> cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
>
>
> Characteristics of this binary (from libperl):
> Compile-time options: DEBUGGING USE_LARGE_FILES
> Locally applied patches:
> DEVEL18374
> Built under linux
> Compiled at Apr 17 2003 13:58:42
> @INC:
> /home/stas/perl/blead/lib/5.9.0/i686-linux
> /home/stas/perl/blead/lib/5.9.0
> /home/stas/perl/blead/lib/site_perl/5.9.0/i686-linux
> /home/stas/perl/blead/lib/site_perl/5.9.0
> /home/stas/perl/blead/lib/site_perl
> .
>
> __________________________________________________________________
> Stas Bekman JAm_pH ------> Just Another mod_perl Hacker
> http://stason.org/ mod_perl Guide ---> http://perl.apache.org
> mailto:stas@stason.org http://use.perl.org http://apacheweek.com
> http://modperlbook.org http://apache.org http://ticketmaster.com
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe@perl.apache.org
> For additional commands, e-mail: dev-help@perl.apache.org
--
-- -----------------------------------------------------------------------------
Philippe M. Chiasson /gozer\@(cpan|ectoplasm)\.org/ 88C3A5A5 (122FF51B/C634E37B)
http://gozer.ectoplasm.org/ F9BF E0C2 480E 7680 1AE5 3631 CB32 A107 88C3 A5A5
Q: It is impossible to make anything foolproof because fools are so ingenious.
perl -e'$$=\${gozer};{$_=unpack(P7,pack(L,$$));/^JAm_pH\n$/&&print||$$++&&redo}'