You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@nuttx.apache.org by xi...@apache.org on 2023/11/08 07:55:04 UTC

(nuttx) 04/04: Documentation: migrate "Bottom-Half Interrupt Handlers" from wiki

This is an automated email from the ASF dual-hosted git repository.

xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git

commit 16691f29a90b997fa399f4cfef0810ad75c0aa63
Author: raiden00pl <ra...@railab.me>
AuthorDate: Tue Nov 7 19:09:06 2023 +0100

    Documentation: migrate "Bottom-Half Interrupt Handlers" from wiki
    
    link: https://cwiki.apache.org/confluence/display/NUTTX/Bottom-Half+Interrupt+Handlers
    
    Co-authored-by: hartmannathan <59...@users.noreply.github.com>
---
 .../implementation/bottomhalf_interrupt.rst        | 135 +++++++++++++++++++++
 Documentation/implementation/index.rst             |   1 +
 2 files changed, 136 insertions(+)

diff --git a/Documentation/implementation/bottomhalf_interrupt.rst b/Documentation/implementation/bottomhalf_interrupt.rst
new file mode 100644
index 0000000000..18862dadfe
--- /dev/null
+++ b/Documentation/implementation/bottomhalf_interrupt.rst
@@ -0,0 +1,135 @@
+==============================
+Bottom-Half Interrupt Handlers
+==============================
+
+RTOS Interrupts
+===============
+
+A well-design RTOS depends on the most minimal of interrupt level processing.
+This is a very different concept that for bare metal programming:
+
+* With bare metal programming most of the real-time work is usually performed
+  in interrupt handlers. Interrupt handler execution may then extend in time
+  considerably due to this interrupt level processing.
+
+To compensate for this extended interrupt processing time, bare metal programmers
+also need prioritized interrupts:
+
+* If an interrupt request for a higher priority interrupt occurs during the
+  extended processing of the lower priority interrupt, then that interrupt handler
+  will itself be interrupted to service the higher priority interrupt requests.
+  In this way bare metal interrupt handling is nested.
+
+With an RTOS, the real-time strategy is very different:
+
+* Interrupts must run very, very briefly so that they do not interfere with the
+  RTOS real-time scheduling. Normally, the interrupt simply performs whatever
+  minor housekeeping is necessary and then immediately defers processing by waking up
+  some task via some Inter-Process Communication(IPC). The RTOS is then responsible for
+  the real-time behavior, not the interrupt. And,
+  
+* since the interrupts must be very brief, there is little or no gain from nesting of interrupts.
+
+Extending interrupt processing
+==============================
+
+But what if extended interrupt processing is required?
+What if there is a significant amount of hardware-related operations that absolutely
+must be performed as quickly as possible before we can turn processing over to
+general, real-time tasking?
+
+In NuttX, this is handled through a high priority trampoline called
+the "High Priority Work Queue". It is a trampoline because it changes the interrupt
+processing context for extended interrupt processing before notifying the normal
+real-time task.
+
+Processing on that ultra-high priority work thread then completes the extended
+interrupt processing with interrupts enabled, but without interference from any
+other real-time tasks.
+
+At the completion of the extended processing, the high priority worker thread can
+then continue processing via some IPC to a normal real-time task.
+
+The portion of interrupt processing that is performed in the interrupt handler with
+interrupts disabled is referred to as Top Half Interrupt processing; the portion of
+interrupt processing that is performed on the high priority work queue with interrupts
+enabled is referred to as Bottom Half Interrupt processing.
+
+High Priority Work Queue
+========================
+
+NuttX supports a high priority work queue as well as a low priority work queue with
+somewhat different properties.
+The high priority work queue is dedicated to the support of Bottom Half Interrupt
+processing.
+Other uses of the high priority work queue may be inappropriate and may harm the
+real-time performance of your system.
+
+The high priority work queue must have these properties:
+
+* **Highest Priority** The high priority work queue must be the highest priority
+  task in your system. No other task should execute at a higher priority; No other
+  task can be permitted to interfere with execution of the high priority work queue.
+
+* **Zero Latency Context Switches** Provided that the priority of the high priority
+  work queue is the highest in the system, then there will be no context switch
+  overhead in getting from the Top Half Interrupt processing to the Bottom Half
+  Interrupt processing other that the normal overhead of returning from an interrupt.
+  Upon return from the interrupt, the system will immediately vector to high priority
+  worker thread.
+
+* **Brief Processing** Processing on the high priority work queue must still be brief.
+  If there is high priority work in progress when the high priority worker is signaled,
+  then that processing will be queued and delayed until it can be processed. That delay
+  will add jitter to your real-time response. You must not generate a backlog of work
+  for the high priority worker thread!
+
+* **No Waiting** Work executing on the high priority work queue must not wait for
+  resources or events on the high priority worker thread. Waiting on the high priority
+  work queue blocks the queue and will, again, damage real-time performance.
+
+Setting Up Bottom Half Interrupt Processing
+===========================================
+
+Bottom half interrupt processing is scheduled by top half interrupt processing by
+simply calling the function ``work_queue()``:
+
+.. code-block:: C
+
+   int work_queue(int qid, FAR struct work_s *work, worker_t worker,
+                  FAR void *arg, clock_t delay);
+
+This same interface is the same for both high- and low-priority.
+The qid argument distinguishes which work queue will be used. For bottom half
+interrupt processing, ``qid`` must be set to ``HPWORK``.
+
+The work argument is memory that will be used to actually queue the work.
+It has no meaning to the caller; it is simply a memory allocation by the caller.
+Otherwise, the work structure is completely managed by the work queue logic.
+The caller should never modify the contents of the work queue structure directly.
+If ``work_queue()`` is called before the previous work as been performed and removed
+from the queue, then any pending work will be canceled and lost.
+The ``work_available()`` function can be called to determine if the work represented
+by the work structure is still in-use.
+
+For the interrupt handling case at hand, the work structure must be pre-allocated
+or statically allocated since dynamic allocations are not supported from the
+interrupt handling context.
+
+The ``worker`` is the name of the function that will perform the bottom half interrupt
+work.
+``arg`` is an arbitrary value that the user provides and will be given to the worker
+function when it executes.
+Normally ``arg`` produces some context in which the work will be performed.
+The type of the worker function is given by:
+
+.. code-block:: C
+
+   typedef CODE void (*worker_t)(FAR void *arg);
+
+Where ``arg`` has the same value as was passed to ``work_queue()``.
+
+Processing or work can be delayed in time.
+The ``work_queue()`` ``delay`` argument provides that time delay in units of system
+clock ticks. However, when used to provide bottom half interrupt processing, the
+delay should always be zero.
diff --git a/Documentation/implementation/index.rst b/Documentation/implementation/index.rst
index ba0be0b7a9..f0b2433186 100644
--- a/Documentation/implementation/index.rst
+++ b/Documentation/implementation/index.rst
@@ -10,3 +10,4 @@ Implementation Details
    critical_sections.rst
    interrupt_controls.rst
    preemption_latency.rst
+   bottomhalf_interrupt.rst