You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by kaffeesurrogat <ka...@posteo.de> on 2020/08/26 15:59:52 UTC
Re: proplems with new release, room configs are different ...
Me again,
i made comparison between the my conference rooms.
First conference room runs on server 1, older version of openmeetings ...
Second conference room runs on server 2, new release of openmeetings
with several mic problem ....
the room on server 2 does not have an Owner ID .... mmmmmm .....
On 26/08/2020 17:46, kaffeesurrogat wrote:
> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so many ;-)
>
> i checked, if this is reproducible. I've made a note of every single step:
>
>
> 1) login user 1 (moderator)
> 2) user 1 entering private room
> 3) user 1 turns camera and mic on
> 4) login user 2 (not a moderator)
> 5) user 2 is entering private room
> 6) user 2 requests permissions to use camera and mic
> 7) user 1 grants permissions to use camera and mic via activities and
> actions
> 8) user 2 turns on camera and mic
> user 1 and user 2 see/hear each other
> 9) user 1 leaves the room
> user 2 sees "wait for moderator..." message
> 10) user 1 re-enters the room
> wait for moderator dissapears
> user 1/user 2 cameras/mics off
> 11) user 1 turns cam/mic back on
> => user 2 sees user 1
> 12) user 2 turns cam/mic back on
> => user 1 does not see user 2 (question mark face ...)
> => several mic symbols displayed on user 2 - browser for user 2.....
>
> see attached pic ....
>
> user1
>
> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
>
> user 2
>
> Firefox 79 (64 Bit)
> Windows 10
>
> user 1 and user 2 both on the same network different machines
>
> server
>
> ubuntu 18.04 LTS
>
> openmeetings ...
>
> Version
> 5.0.0
> Revision
> 422e22f
> Build date
> 2020-08-18T00:21:52Z
>
> Many thanks again,
>
> kaffeesurrogat
>
>
>
>
>
> On 26/08/2020 08:50, Denis Noctor wrote:
>> @kaffeesurrogat,
>>
>> First of all can you confirm that you can see and hear at least 2 users in a room as it is a little unclear... and if you’ve read my previous email.
> yes there are two users in the room. the can hear an see each other ....
>
>> I won’t be able to respond immediately as I am on the the other side of the planet and am heading off to bed... (1.38am)... but I am curious to see if you have been able to reproduce this scenario more than once... as it is not very clear from your posts.
> yes .....
>
>> The situation you described might be exceptionally rare... as I can’t see the reason for a moderator to leave a room when others are in it... and as a result this scenario might be an oversight... but a very small one... taking meeting protocol into consideration. But I’ve recommended an alternative.
>>
>> Hope this helps somewhat.
>>
>> Again, it is important to stress that it would be useful to identify server specs, browser versions and so on.
>>
>> All the best, Denis.
>>
>>
>>
>>
>>
>> Sent from my iPhone
>>
>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat <ka...@posteo.de> wrote:
>>>
>>> Dear Maxim, dear Alvaro, dear ....
>>>
>>> i did use a linux machine and a windows machine to test my setup .....
>>> I'm quite shure that I made a config mistake, but which one ?
>>>
>>> Many thanks for your testing and trying,
>>>
>>> kaffeesurrogat ....
>>>
>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>>>> Hi,
>>>>
>>>> Are you using two different systems for two logins or just one system
>>>> with two browser
>>>>
>>>>
>>>>
>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik <solomax666@gmail.com
>>>> <ma...@gmail.com>> wrote:
>>>>
>>>> I'll try to test your steps
>>>> will take some time ....
>>>>
>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>>>>
>>>> Dear List,
>>>>
>>>> many thanks for your new release. I feel ashamed, that I have
>>>> to ask
>>>> again and again on this list.
>>>>
>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
>>>> followed the
>>>> guides from the wiki.
>>>>
>>>> I can open up my camera and mic. The following is happening:
>>>>
>>>>
>>>> 1) moderator enters the rom while nobody is there (chrome).
>>>> 2) second user enters the room. Both enable there camera and
>>>> mic. fine
>>>> :-) (firefox)
>>>> 3) The moderator leaves the room and the second users sees a
>>>> message to
>>>> be patient until the moderator enters the room again.
>>>> 4) moderators reenters the room, both cameras are turned off
>>>> 5) second users turns on his camera ....
>>>>
>>>> quite a few error messages show up, the camera window is
>>>> blue and
>>>> blank on the second users screen, on the moderator screens i
>>>> can see only the questionmarkman ...
>>>>
>>>> I've attached all of my config files and some screenshots as
>>>> png ...
>>>>
>>>> I did check the coturn server with trickle ... also attached
>>>>
>>>> I did attache a screen shot of the moderator account, several mic
>>>> symbols on the screen
>>>>
>>>> The invalidStateError appears on the second users screen
>>>>
>>>> The RtcPeerConnection on the moderator screen .....
>>>>
>>>>
>>>> I'm lost .... already double checked my config files and
>>>> reread the
>>>> installation manuals ....
>>>>
>>>>
>>>> Many thanks,
>>>>
>>>> kaffeesurogat
>>>>
>>>>
>>>>
>>>> --
>>>> Best regards,
>>>> Maxim
>>>>
Re: proplems with new release, room configs are different ...
Posted by Maxim Solodovnik <so...@gmail.com>.
I'm not sure if current fix is complete :(
so I'm asking for additional testing and feedback :)
On Mon, 7 Sep 2020 at 15:00, kaffeesurrogat <ka...@posteo.de>
wrote:
> @maxim
>
> yes i will check this evening ... ;-) many thanks in advance .... just
> noticed your fix on jira this morning ... ;-)
>
>
>
> On 07/09/2020 09:52, Maxim Solodovnik wrote:
> >
> >
> > @kaffeesurrogat,
> >
> >
> > can you please check if latest snapshot from
> > here
> https://ci-builds.apache.org/job/OpenMeetings/job/openmeetings/
> >
> >
> > works better?
> >
> >
> > On Tue, 1 Sep 2020 at 13:21, kaffeesurrogat <kaffeesurrogat@posteo.de
> > <ma...@posteo.de>> wrote:
> >
> > @Maxim: Thanks for letting me know ;-)
> >
> >
> >
> > On 31/08/2020 18:07, Maxim Solodovnik wrote:
> > > FTR https://issues.apache.org/jira/browse/OPENMEETINGS-2424
> > >
> > > On Mon, 31 Aug 2020 at 14:10, Denis Noctor
> > <denisnoctor@gmail.com <ma...@gmail.com>
> > > <mailto:denisnoctor@gmail.com <ma...@gmail.com>>>
> > wrote:
> > >
> > > Hi there @kaffeesurrogat... did you ever get that problem
> sorted
> > > in the end?
> > >
> > > Sent from my iPhone
> > >
> > > > On Aug 26, 2020, at 12:49 PM, kaffeesurrogat
> > > <kaffeesurrogat@posteo.de <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>> wrote:
> > > >
> > > >
> > > >
> > > >> On 26/08/2020 18:46, Denis Noctor wrote:
> > > >> If you take a look at this...
> > > >> https://openmeetings.apache.org/
> > > >>
> > > >> Near the bottom of the page you will notice one of the
> > changes /
> > > >> improvements... “Direct link for entering the room with room
> > > name (not
> > > >> ID)”
> > > >>
> > > >> As a result... maybe... there are some field changes
> > (additions) to
> > > >> the database.
> > > >
> > > > you might be right ;-)
> > > >
> > > >>
> > > >> You previously mentioned: 2 rooms, 2 different servers, 2
> > different
> > > >> versions of OM. I would keep everything the same... same
> > > version of OM.
> > > >
> > > > sorry, that was some kind of missunderstanding. all my
> testing
> > > were done
> > > > with one server OM 5.0.0 (new release) on it
> > > >
> > > >
> > > >>
> > > >> I’ve tried to reproduce this on my set up... using one
> > server,
> > > 2 users
> > > >> logged into the same room (one using updated version of
> > Chrome
> > > and the
> > > >> other using updated Firefox), one install of OM on
> > server and
> > > >> everything works fine.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >> Sent from my iPhone
> > > >>
> > > >> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat
> > > <kaffeesurrogat@posteo.de <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de <ma...@posteo.de>>
> > > >> <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>
> > > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>>> wrote:
> > > >>
> > > >>>
> > > >>>
> > > >>>> On 26/08/2020 18:16, Denis Noctor wrote:
> > > >>>> So let me get try to get my head around this... because
> > I didn’t
> > > >>>> notice you mention this before...
> > > >>> that's right .... i just noticed it a few minutes ago
> .....
> > > >>>
> > > >>>
> > > >>>> Are you trying to set up a “clustering environment”....
> > using 2
> > > >>>> different versions of OM?
> > > >>>
> > > >>> no ... i have one machine to make changes and updates
> > one for
> > > daily use
> > > >>> no clustering at all ;-)
> > > >>>
> > > >>>
> > > >>>
> > > >>>> Sent from my iPhone
> > > >>>
> > > >>>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
> > > >>>>> <kaffeesurrogat@posteo.de
> > <ma...@posteo.de> <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>
> > > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>
> > > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>>> wrote:
> > > >>>>>
> > > >>>>> Me again,
> > > >>>>>
> > > >>>>> i made comparison between the my conference rooms.
> > > >>>>>
> > > >>>>> First conference room runs on server 1, older version of
> > > >>>>> openmeetings ...
> > > >>>>> Second conference room runs on server 2, new release of
> > > openmeetings
> > > >>>>> with several mic problem ....
> > > >>>>>
> > > >>>>> the room on server 2 does not have an Owner ID ....
> > mmmmmm .....
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
> > > >>>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh
> > there are so
> > > >>>>>> many ;-)
> > > >>>>>>
> > > >>>>>> i checked, if this is reproducible. I've made a note
> > of every
> > > >>>>>> single step:
> > > >>>>>>
> > > >>>>>>
> > > >>>>>> 1) login user 1 (moderator)
> > > >>>>>> 2) user 1 entering private room
> > > >>>>>> 3) user 1 turns camera and mic on
> > > >>>>>> 4) login user 2 (not a moderator)
> > > >>>>>> 5) user 2 is entering private room
> > > >>>>>> 6) user 2 requests permissions to use camera and mic
> > > >>>>>> 7) user 1 grants permissions to use camera and mic via
> > > activities and
> > > >>>>>> actions
> > > >>>>>> 8) user 2 turns on camera and mic
> > > >>>>>> user 1 and user 2 see/hear each other
> > > >>>>>> 9) user 1 leaves the room
> > > >>>>>> user 2 sees "wait for moderator..." message
> > > >>>>>> 10) user 1 re-enters the room
> > > >>>>>> wait for moderator dissapears
> > > >>>>>> user 1/user 2 cameras/mics off
> > > >>>>>> 11) user 1 turns cam/mic back on
> > > >>>>>> => user 2 sees user 1
> > > >>>>>> 12) user 2 turns cam/mic back on
> > > >>>>>> => user 1 does not see user 2 (question mark face
> ...)
> > > >>>>>> => several mic symbols displayed on user 2 -
> > browser for
> > > user
> > > >>>>>> 2.....
> > > >>>>>>
> > > >>>>>> see attached pic ....
> > > >>>>>>
> > > >>>>>> user1
> > > >>>>>>
> > > >>>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo
> > linux
> > > machine
> > > >>>>>>
> > > >>>>>> user 2
> > > >>>>>>
> > > >>>>>> Firefox 79 (64 Bit)
> > > >>>>>> Windows 10
> > > >>>>>>
> > > >>>>>> user 1 and user 2 both on the same network different
> > machines
> > > >>>>>>
> > > >>>>>> server
> > > >>>>>>
> > > >>>>>> ubuntu 18.04 LTS
> > > >>>>>>
> > > >>>>>> openmeetings ...
> > > >>>>>>
> > > >>>>>> Version
> > > >>>>>> 5.0.0
> > > >>>>>> Revision
> > > >>>>>> 422e22f
> > > >>>>>> Build date
> > > >>>>>> 2020-08-18T00:21:52Z
> > > >>>>>>
> > > >>>>>> Many thanks again,
> > > >>>>>>
> > > >>>>>> kaffeesurrogat
> > > >>>>>>
> > > >>>>>>
> > > >>>>>>
> > > >>>>>>
> > > >>>>>>
> > > >>>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
> > > >>>>>>> @kaffeesurrogat,
> > > >>>>>>>
> > > >>>>>>> First of all can you confirm that you can see and
> > hear at
> > > least 2
> > > >>>>>>> users in a room as it is a little unclear... and if
> > you’ve
> > > read
> > > >>>>>>> my previous email.
> > > >>>>>> yes there are two users in the room. the can hear an
> > see each
> > > >>>>>> other ....
> > > >>>>>>
> > > >>>>>>> I won’t be able to respond immediately as I am on
> > the the
> > > other
> > > >>>>>>> side of the planet and am heading off to bed...
> > > (1.38am)... but I
> > > >>>>>>> am curious to see if you have been able to reproduce
> > this
> > > >>>>>>> scenario more than once... as it is not very clear from
> > > your posts.
> > > >>>>>> yes .....
> > > >>>>>>
> > > >>>>>>> The situation you described might be exceptionally
> > rare...
> > > as I
> > > >>>>>>> can’t see the reason for a moderator to leave a room
> > when
> > > others
> > > >>>>>>> are in it... and as a result this scenario might be an
> > > >>>>>>> oversight... but a very small one... taking meeting
> > > protocol into
> > > >>>>>>> consideration. But I’ve recommended an alternative.
> > > >>>>>>>
> > > >>>>>>> Hope this helps somewhat.
> > > >>>>>>>
> > > >>>>>>> Again, it is important to stress that it would be
> > useful to
> > > >>>>>>> identify server specs, browser versions and so on.
> > > >>>>>>>
> > > >>>>>>> All the best, Denis.
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> Sent from my iPhone
> > > >>>>>>>
> > > >>>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
> > > >>>>>>>> <kaffeesurrogat@posteo.de
> > <ma...@posteo.de>
> > > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>
> > <mailto:kaffeesurrogat@posteo.de <ma...@posteo.de>
> > > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>>> wrote:
> > > >>>>>>>>
> > > >>>>>>>> Dear Maxim, dear Alvaro, dear ....
> > > >>>>>>>>
> > > >>>>>>>> i did use a linux machine and a windows machine to
> test
> > > my setup
> > > >>>>>>>> .....
> > > >>>>>>>> I'm quite shure that I made a config mistake, but
> > which one ?
> > > >>>>>>>>
> > > >>>>>>>> Many thanks for your testing and trying,
> > > >>>>>>>>
> > > >>>>>>>> kaffeesurrogat ....
> > > >>>>>>>>
> > > >>>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
> > > >>>>>>>>> Hi,
> > > >>>>>>>>>
> > > >>>>>>>>> Are you using two different systems for two logins or
> > > just one
> > > >>>>>>>>> system
> > > >>>>>>>>> with two browser
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
> > > >>>>>>>>> <solomax666@gmail.com
> > <ma...@gmail.com> <mailto:solomax666@gmail.com
> > <ma...@gmail.com>>
> > > <mailto:solomax666@gmail.com <ma...@gmail.com>
> > <mailto:solomax666@gmail.com <ma...@gmail.com>>>
> > > >>>>>>>>> <mailto:solomax666@gmail.com
> > <ma...@gmail.com>
> > > <mailto:solomax666@gmail.com
> > <ma...@gmail.com>>>> wrote:
> > > >>>>>>>>>
> > > >>>>>>>>> I'll try to test your steps
> > > >>>>>>>>> will take some time ....
> > > >>>>>>>>>
> > > >>>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
> > > >>>>>>>>> <kaffeesurrogat@posteo.de
> > <ma...@posteo.de>
> > > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>
> > <mailto:kaffeesurrogat@posteo.de <ma...@posteo.de>
> > > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>>
> > > >>>>>>>>> <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>
> > > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>>> wrote:
> > > >>>>>>>>>
> > > >>>>>>>>> Dear List,
> > > >>>>>>>>>
> > > >>>>>>>>> many thanks for your new release. I feel
> ashamed,
> > > that I have
> > > >>>>>>>>> to ask
> > > >>>>>>>>> again and again on this list.
> > > >>>>>>>>>
> > > >>>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04
> > LTS and I've
> > > >>>>>>>>> followed the
> > > >>>>>>>>> guides from the wiki.
> > > >>>>>>>>>
> > > >>>>>>>>> I can open up my camera and mic. The following
> is
> > > happening:
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>> 1) moderator enters the rom while nobody is
> there
> > > (chrome).
> > > >>>>>>>>> 2) second user enters the room. Both enable
> there
> > > camera and
> > > >>>>>>>>> mic. fine
> > > >>>>>>>>> :-) (firefox)
> > > >>>>>>>>> 3) The moderator leaves the room and the second
> > > users sees a
> > > >>>>>>>>> message to
> > > >>>>>>>>> be patient until the moderator enters the
> > room again.
> > > >>>>>>>>> 4) moderators reenters the room, both cameras
> are
> > > turned off
> > > >>>>>>>>> 5) second users turns on his camera ....
> > > >>>>>>>>>
> > > >>>>>>>>> quite a few error messages show up, the
> > camera
> > > window is
> > > >>>>>>>>> blue and
> > > >>>>>>>>> blank on the second users screen, on the
> > moderator
> > > screens i
> > > >>>>>>>>> can see only the questionmarkman ...
> > > >>>>>>>>>
> > > >>>>>>>>> I've attached all of my config files and some
> > > screenshots as
> > > >>>>>>>>> png ...
> > > >>>>>>>>>
> > > >>>>>>>>> I did check the coturn server with trickle
> > ... also
> > > attached
> > > >>>>>>>>>
> > > >>>>>>>>> I did attache a screen shot of the moderator
> > account,
> > > >>>>>>>>> several mic
> > > >>>>>>>>> symbols on the screen
> > > >>>>>>>>>
> > > >>>>>>>>> The invalidStateError appears on the second
> users
> > > screen
> > > >>>>>>>>>
> > > >>>>>>>>> The RtcPeerConnection on the moderator screen
> > .....
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>> I'm lost .... already double checked my config
> > > files and
> > > >>>>>>>>> reread the
> > > >>>>>>>>> installation manuals ....
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>> Many thanks,
> > > >>>>>>>>>
> > > >>>>>>>>> kaffeesurogat
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>> --
> > > >>>>>>>>> Best regards,
> > > >>>>>>>>> Maxim
> > > >>>>>>>>>
> > > >>>
> > > >
> > >
> > >
> > >
> > > --
> > > Best regards,
> > > Maxim
> >
> >
> >
> > --
> > Best regards,
> > Maxim
>
>
--
Best regards,
Maxim
Re: proplems with new release, room configs are different ...
Posted by kaffeesurrogat <ka...@posteo.de>.
On 07/09/2020 09:59, kaffeesurrogat wrote:
> @maxim
>
> yes i will check this evening ... ;-) many thanks in advance .... just
> noticed your fix on jira this morning ... ;-)
i'm glad that i can help at least a tiny little bit ;-)
>
>
>
> On 07/09/2020 09:52, Maxim Solodovnik wrote:
>>
>> @kaffeesurrogat,
>>
>>
>> can you please check if latest snapshot from
>> here https://ci-builds.apache.org/job/OpenMeetings/job/openmeetings/
>>
>>
>> works better?
>>
>>
>> On Tue, 1 Sep 2020 at 13:21, kaffeesurrogat <kaffeesurrogat@posteo.de
>> <ma...@posteo.de>> wrote:
>>
>> @Maxim: Thanks for letting me know ;-)
>>
>>
>>
>> On 31/08/2020 18:07, Maxim Solodovnik wrote:
>> > FTR https://issues.apache.org/jira/browse/OPENMEETINGS-2424
>> >
>> > On Mon, 31 Aug 2020 at 14:10, Denis Noctor
>> <denisnoctor@gmail.com <ma...@gmail.com>
>> > <mailto:denisnoctor@gmail.com <ma...@gmail.com>>>
>> wrote:
>> >
>> > Hi there @kaffeesurrogat... did you ever get that problem sorted
>> > in the end?
>> >
>> > Sent from my iPhone
>> >
>> > > On Aug 26, 2020, at 12:49 PM, kaffeesurrogat
>> > <kaffeesurrogat@posteo.de <ma...@posteo.de>
>> <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>>> wrote:
>> > >
>> > >
>> > >
>> > >> On 26/08/2020 18:46, Denis Noctor wrote:
>> > >> If you take a look at this...
>> > >> https://openmeetings.apache.org/
>> > >>
>> > >> Near the bottom of the page you will notice one of the
>> changes /
>> > >> improvements... “Direct link for entering the room with room
>> > name (not
>> > >> ID)”
>> > >>
>> > >> As a result... maybe... there are some field changes
>> (additions) to
>> > >> the database.
>> > >
>> > > you might be right ;-)
>> > >
>> > >>
>> > >> You previously mentioned: 2 rooms, 2 different servers, 2
>> different
>> > >> versions of OM. I would keep everything the same... same
>> > version of OM.
>> > >
>> > > sorry, that was some kind of missunderstanding. all my testing
>> > were done
>> > > with one server OM 5.0.0 (new release) on it
>> > >
>> > >
>> > >>
>> > >> I’ve tried to reproduce this on my set up... using one
>> server,
>> > 2 users
>> > >> logged into the same room (one using updated version of
>> Chrome
>> > and the
>> > >> other using updated Firefox), one install of OM on
>> server and
>> > >> everything works fine.
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >> Sent from my iPhone
>> > >>
>> > >> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat
>> > <kaffeesurrogat@posteo.de <ma...@posteo.de>
>> <mailto:kaffeesurrogat@posteo.de <ma...@posteo.de>>
>> > >> <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>
>> > <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>>>> wrote:
>> > >>
>> > >>>
>> > >>>
>> > >>>> On 26/08/2020 18:16, Denis Noctor wrote:
>> > >>>> So let me get try to get my head around this... because
>> I didn’t
>> > >>>> notice you mention this before...
>> > >>> that's right .... i just noticed it a few minutes ago .....
>> > >>>
>> > >>>
>> > >>>> Are you trying to set up a “clustering environment”....
>> using 2
>> > >>>> different versions of OM?
>> > >>>
>> > >>> no ... i have one machine to make changes and updates
>> one for
>> > daily use
>> > >>> no clustering at all ;-)
>> > >>>
>> > >>>
>> > >>>
>> > >>>> Sent from my iPhone
>> > >>>
>> > >>>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
>> > >>>>> <kaffeesurrogat@posteo.de
>> <ma...@posteo.de> <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>>
>> > <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>
>> > <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>>>> wrote:
>> > >>>>>
>> > >>>>> Me again,
>> > >>>>>
>> > >>>>> i made comparison between the my conference rooms.
>> > >>>>>
>> > >>>>> First conference room runs on server 1, older version of
>> > >>>>> openmeetings ...
>> > >>>>> Second conference room runs on server 2, new release of
>> > openmeetings
>> > >>>>> with several mic problem ....
>> > >>>>>
>> > >>>>> the room on server 2 does not have an Owner ID ....
>> mmmmmm .....
>> > >>>>>
>> > >>>>>
>> > >>>>>
>> > >>>>>
>> > >>>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
>> > >>>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh
>> there are so
>> > >>>>>> many ;-)
>> > >>>>>>
>> > >>>>>> i checked, if this is reproducible. I've made a note
>> of every
>> > >>>>>> single step:
>> > >>>>>>
>> > >>>>>>
>> > >>>>>> 1) login user 1 (moderator)
>> > >>>>>> 2) user 1 entering private room
>> > >>>>>> 3) user 1 turns camera and mic on
>> > >>>>>> 4) login user 2 (not a moderator)
>> > >>>>>> 5) user 2 is entering private room
>> > >>>>>> 6) user 2 requests permissions to use camera and mic
>> > >>>>>> 7) user 1 grants permissions to use camera and mic via
>> > activities and
>> > >>>>>> actions
>> > >>>>>> 8) user 2 turns on camera and mic
>> > >>>>>> user 1 and user 2 see/hear each other
>> > >>>>>> 9) user 1 leaves the room
>> > >>>>>> user 2 sees "wait for moderator..." message
>> > >>>>>> 10) user 1 re-enters the room
>> > >>>>>> wait for moderator dissapears
>> > >>>>>> user 1/user 2 cameras/mics off
>> > >>>>>> 11) user 1 turns cam/mic back on
>> > >>>>>> => user 2 sees user 1
>> > >>>>>> 12) user 2 turns cam/mic back on
>> > >>>>>> => user 1 does not see user 2 (question mark face ...)
>> > >>>>>> => several mic symbols displayed on user 2 -
>> browser for
>> > user
>> > >>>>>> 2.....
>> > >>>>>>
>> > >>>>>> see attached pic ....
>> > >>>>>>
>> > >>>>>> user1
>> > >>>>>>
>> > >>>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo
>> linux
>> > machine
>> > >>>>>>
>> > >>>>>> user 2
>> > >>>>>>
>> > >>>>>> Firefox 79 (64 Bit)
>> > >>>>>> Windows 10
>> > >>>>>>
>> > >>>>>> user 1 and user 2 both on the same network different
>> machines
>> > >>>>>>
>> > >>>>>> server
>> > >>>>>>
>> > >>>>>> ubuntu 18.04 LTS
>> > >>>>>>
>> > >>>>>> openmeetings ...
>> > >>>>>>
>> > >>>>>> Version
>> > >>>>>> 5.0.0
>> > >>>>>> Revision
>> > >>>>>> 422e22f
>> > >>>>>> Build date
>> > >>>>>> 2020-08-18T00:21:52Z
>> > >>>>>>
>> > >>>>>> Many thanks again,
>> > >>>>>>
>> > >>>>>> kaffeesurrogat
>> > >>>>>>
>> > >>>>>>
>> > >>>>>>
>> > >>>>>>
>> > >>>>>>
>> > >>>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
>> > >>>>>>> @kaffeesurrogat,
>> > >>>>>>>
>> > >>>>>>> First of all can you confirm that you can see and
>> hear at
>> > least 2
>> > >>>>>>> users in a room as it is a little unclear... and if
>> you’ve
>> > read
>> > >>>>>>> my previous email.
>> > >>>>>> yes there are two users in the room. the can hear an
>> see each
>> > >>>>>> other ....
>> > >>>>>>
>> > >>>>>>> I won’t be able to respond immediately as I am on
>> the the
>> > other
>> > >>>>>>> side of the planet and am heading off to bed...
>> > (1.38am)... but I
>> > >>>>>>> am curious to see if you have been able to reproduce
>> this
>> > >>>>>>> scenario more than once... as it is not very clear from
>> > your posts.
>> > >>>>>> yes .....
>> > >>>>>>
>> > >>>>>>> The situation you described might be exceptionally
>> rare...
>> > as I
>> > >>>>>>> can’t see the reason for a moderator to leave a room
>> when
>> > others
>> > >>>>>>> are in it... and as a result this scenario might be an
>> > >>>>>>> oversight... but a very small one... taking meeting
>> > protocol into
>> > >>>>>>> consideration. But I’ve recommended an alternative.
>> > >>>>>>>
>> > >>>>>>> Hope this helps somewhat.
>> > >>>>>>>
>> > >>>>>>> Again, it is important to stress that it would be
>> useful to
>> > >>>>>>> identify server specs, browser versions and so on.
>> > >>>>>>>
>> > >>>>>>> All the best, Denis.
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>>
>> > >>>>>>> Sent from my iPhone
>> > >>>>>>>
>> > >>>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
>> > >>>>>>>> <kaffeesurrogat@posteo.de
>> <ma...@posteo.de>
>> > <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>>
>> <mailto:kaffeesurrogat@posteo.de <ma...@posteo.de>
>> > <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>>>> wrote:
>> > >>>>>>>>
>> > >>>>>>>> Dear Maxim, dear Alvaro, dear ....
>> > >>>>>>>>
>> > >>>>>>>> i did use a linux machine and a windows machine to test
>> > my setup
>> > >>>>>>>> .....
>> > >>>>>>>> I'm quite shure that I made a config mistake, but
>> which one ?
>> > >>>>>>>>
>> > >>>>>>>> Many thanks for your testing and trying,
>> > >>>>>>>>
>> > >>>>>>>> kaffeesurrogat ....
>> > >>>>>>>>
>> > >>>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>> > >>>>>>>>> Hi,
>> > >>>>>>>>>
>> > >>>>>>>>> Are you using two different systems for two logins or
>> > just one
>> > >>>>>>>>> system
>> > >>>>>>>>> with two browser
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
>> > >>>>>>>>> <solomax666@gmail.com
>> <ma...@gmail.com> <mailto:solomax666@gmail.com
>> <ma...@gmail.com>>
>> > <mailto:solomax666@gmail.com <ma...@gmail.com>
>> <mailto:solomax666@gmail.com <ma...@gmail.com>>>
>> > >>>>>>>>> <mailto:solomax666@gmail.com
>> <ma...@gmail.com>
>> > <mailto:solomax666@gmail.com
>> <ma...@gmail.com>>>> wrote:
>> > >>>>>>>>>
>> > >>>>>>>>> I'll try to test your steps
>> > >>>>>>>>> will take some time ....
>> > >>>>>>>>>
>> > >>>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>> > >>>>>>>>> <kaffeesurrogat@posteo.de
>> <ma...@posteo.de>
>> > <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>>
>> <mailto:kaffeesurrogat@posteo.de <ma...@posteo.de>
>> > <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>>>
>> > >>>>>>>>> <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>
>> > <mailto:kaffeesurrogat@posteo.de
>> <ma...@posteo.de>>>> wrote:
>> > >>>>>>>>>
>> > >>>>>>>>> Dear List,
>> > >>>>>>>>>
>> > >>>>>>>>> many thanks for your new release. I feel ashamed,
>> > that I have
>> > >>>>>>>>> to ask
>> > >>>>>>>>> again and again on this list.
>> > >>>>>>>>>
>> > >>>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04
>> LTS and I've
>> > >>>>>>>>> followed the
>> > >>>>>>>>> guides from the wiki.
>> > >>>>>>>>>
>> > >>>>>>>>> I can open up my camera and mic. The following is
>> > happening:
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>> 1) moderator enters the rom while nobody is there
>> > (chrome).
>> > >>>>>>>>> 2) second user enters the room. Both enable there
>> > camera and
>> > >>>>>>>>> mic. fine
>> > >>>>>>>>> :-) (firefox)
>> > >>>>>>>>> 3) The moderator leaves the room and the second
>> > users sees a
>> > >>>>>>>>> message to
>> > >>>>>>>>> be patient until the moderator enters the
>> room again.
>> > >>>>>>>>> 4) moderators reenters the room, both cameras are
>> > turned off
>> > >>>>>>>>> 5) second users turns on his camera ....
>> > >>>>>>>>>
>> > >>>>>>>>> quite a few error messages show up, the
>> camera
>> > window is
>> > >>>>>>>>> blue and
>> > >>>>>>>>> blank on the second users screen, on the
>> moderator
>> > screens i
>> > >>>>>>>>> can see only the questionmarkman ...
>> > >>>>>>>>>
>> > >>>>>>>>> I've attached all of my config files and some
>> > screenshots as
>> > >>>>>>>>> png ...
>> > >>>>>>>>>
>> > >>>>>>>>> I did check the coturn server with trickle
>> ... also
>> > attached
>> > >>>>>>>>>
>> > >>>>>>>>> I did attache a screen shot of the moderator
>> account,
>> > >>>>>>>>> several mic
>> > >>>>>>>>> symbols on the screen
>> > >>>>>>>>>
>> > >>>>>>>>> The invalidStateError appears on the second users
>> > screen
>> > >>>>>>>>>
>> > >>>>>>>>> The RtcPeerConnection on the moderator screen
>> .....
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>> I'm lost .... already double checked my config
>> > files and
>> > >>>>>>>>> reread the
>> > >>>>>>>>> installation manuals ....
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>> Many thanks,
>> > >>>>>>>>>
>> > >>>>>>>>> kaffeesurogat
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>>
>> > >>>>>>>>> --
>> > >>>>>>>>> Best regards,
>> > >>>>>>>>> Maxim
>> > >>>>>>>>>
>> > >>>
>> > >
>> >
>> >
>> >
>> > --
>> > Best regards,
>> > Maxim
>>
>>
>>
>> --
>> Best regards,
>> Maxim
Re: proplems with new release, room configs are different ...
Posted by kaffeesurrogat <ka...@posteo.de>.
@maxim
yes i will check this evening ... ;-) many thanks in advance .... just
noticed your fix on jira this morning ... ;-)
On 07/09/2020 09:52, Maxim Solodovnik wrote:
>
>
> @kaffeesurrogat,
>
>
> can you please check if latest snapshot from
> here https://ci-builds.apache.org/job/OpenMeetings/job/openmeetings/
>
>
> works better?
>
>
> On Tue, 1 Sep 2020 at 13:21, kaffeesurrogat <kaffeesurrogat@posteo.de
> <ma...@posteo.de>> wrote:
>
> @Maxim: Thanks for letting me know ;-)
>
>
>
> On 31/08/2020 18:07, Maxim Solodovnik wrote:
> > FTR https://issues.apache.org/jira/browse/OPENMEETINGS-2424
> >
> > On Mon, 31 Aug 2020 at 14:10, Denis Noctor
> <denisnoctor@gmail.com <ma...@gmail.com>
> > <mailto:denisnoctor@gmail.com <ma...@gmail.com>>>
> wrote:
> >
> > Hi there @kaffeesurrogat... did you ever get that problem sorted
> > in the end?
> >
> > Sent from my iPhone
> >
> > > On Aug 26, 2020, at 12:49 PM, kaffeesurrogat
> > <kaffeesurrogat@posteo.de <ma...@posteo.de>
> <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>> wrote:
> > >
> > >
> > >
> > >> On 26/08/2020 18:46, Denis Noctor wrote:
> > >> If you take a look at this...
> > >> https://openmeetings.apache.org/
> > >>
> > >> Near the bottom of the page you will notice one of the
> changes /
> > >> improvements... “Direct link for entering the room with room
> > name (not
> > >> ID)”
> > >>
> > >> As a result... maybe... there are some field changes
> (additions) to
> > >> the database.
> > >
> > > you might be right ;-)
> > >
> > >>
> > >> You previously mentioned: 2 rooms, 2 different servers, 2
> different
> > >> versions of OM. I would keep everything the same... same
> > version of OM.
> > >
> > > sorry, that was some kind of missunderstanding. all my testing
> > were done
> > > with one server OM 5.0.0 (new release) on it
> > >
> > >
> > >>
> > >> I’ve tried to reproduce this on my set up... using one
> server,
> > 2 users
> > >> logged into the same room (one using updated version of
> Chrome
> > and the
> > >> other using updated Firefox), one install of OM on
> server and
> > >> everything works fine.
> > >
> > >
> > >
> > >
> > >
> > >> Sent from my iPhone
> > >>
> > >> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat
> > <kaffeesurrogat@posteo.de <ma...@posteo.de>
> <mailto:kaffeesurrogat@posteo.de <ma...@posteo.de>>
> > >> <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>>> wrote:
> > >>
> > >>>
> > >>>
> > >>>> On 26/08/2020 18:16, Denis Noctor wrote:
> > >>>> So let me get try to get my head around this... because
> I didn’t
> > >>>> notice you mention this before...
> > >>> that's right .... i just noticed it a few minutes ago .....
> > >>>
> > >>>
> > >>>> Are you trying to set up a “clustering environment”....
> using 2
> > >>>> different versions of OM?
> > >>>
> > >>> no ... i have one machine to make changes and updates
> one for
> > daily use
> > >>> no clustering at all ;-)
> > >>>
> > >>>
> > >>>
> > >>>> Sent from my iPhone
> > >>>
> > >>>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
> > >>>>> <kaffeesurrogat@posteo.de
> <ma...@posteo.de> <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>
> > <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>>> wrote:
> > >>>>>
> > >>>>> Me again,
> > >>>>>
> > >>>>> i made comparison between the my conference rooms.
> > >>>>>
> > >>>>> First conference room runs on server 1, older version of
> > >>>>> openmeetings ...
> > >>>>> Second conference room runs on server 2, new release of
> > openmeetings
> > >>>>> with several mic problem ....
> > >>>>>
> > >>>>> the room on server 2 does not have an Owner ID ....
> mmmmmm .....
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
> > >>>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh
> there are so
> > >>>>>> many ;-)
> > >>>>>>
> > >>>>>> i checked, if this is reproducible. I've made a note
> of every
> > >>>>>> single step:
> > >>>>>>
> > >>>>>>
> > >>>>>> 1) login user 1 (moderator)
> > >>>>>> 2) user 1 entering private room
> > >>>>>> 3) user 1 turns camera and mic on
> > >>>>>> 4) login user 2 (not a moderator)
> > >>>>>> 5) user 2 is entering private room
> > >>>>>> 6) user 2 requests permissions to use camera and mic
> > >>>>>> 7) user 1 grants permissions to use camera and mic via
> > activities and
> > >>>>>> actions
> > >>>>>> 8) user 2 turns on camera and mic
> > >>>>>> user 1 and user 2 see/hear each other
> > >>>>>> 9) user 1 leaves the room
> > >>>>>> user 2 sees "wait for moderator..." message
> > >>>>>> 10) user 1 re-enters the room
> > >>>>>> wait for moderator dissapears
> > >>>>>> user 1/user 2 cameras/mics off
> > >>>>>> 11) user 1 turns cam/mic back on
> > >>>>>> => user 2 sees user 1
> > >>>>>> 12) user 2 turns cam/mic back on
> > >>>>>> => user 1 does not see user 2 (question mark face ...)
> > >>>>>> => several mic symbols displayed on user 2 -
> browser for
> > user
> > >>>>>> 2.....
> > >>>>>>
> > >>>>>> see attached pic ....
> > >>>>>>
> > >>>>>> user1
> > >>>>>>
> > >>>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo
> linux
> > machine
> > >>>>>>
> > >>>>>> user 2
> > >>>>>>
> > >>>>>> Firefox 79 (64 Bit)
> > >>>>>> Windows 10
> > >>>>>>
> > >>>>>> user 1 and user 2 both on the same network different
> machines
> > >>>>>>
> > >>>>>> server
> > >>>>>>
> > >>>>>> ubuntu 18.04 LTS
> > >>>>>>
> > >>>>>> openmeetings ...
> > >>>>>>
> > >>>>>> Version
> > >>>>>> 5.0.0
> > >>>>>> Revision
> > >>>>>> 422e22f
> > >>>>>> Build date
> > >>>>>> 2020-08-18T00:21:52Z
> > >>>>>>
> > >>>>>> Many thanks again,
> > >>>>>>
> > >>>>>> kaffeesurrogat
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
> > >>>>>>> @kaffeesurrogat,
> > >>>>>>>
> > >>>>>>> First of all can you confirm that you can see and
> hear at
> > least 2
> > >>>>>>> users in a room as it is a little unclear... and if
> you’ve
> > read
> > >>>>>>> my previous email.
> > >>>>>> yes there are two users in the room. the can hear an
> see each
> > >>>>>> other ....
> > >>>>>>
> > >>>>>>> I won’t be able to respond immediately as I am on
> the the
> > other
> > >>>>>>> side of the planet and am heading off to bed...
> > (1.38am)... but I
> > >>>>>>> am curious to see if you have been able to reproduce
> this
> > >>>>>>> scenario more than once... as it is not very clear from
> > your posts.
> > >>>>>> yes .....
> > >>>>>>
> > >>>>>>> The situation you described might be exceptionally
> rare...
> > as I
> > >>>>>>> can’t see the reason for a moderator to leave a room
> when
> > others
> > >>>>>>> are in it... and as a result this scenario might be an
> > >>>>>>> oversight... but a very small one... taking meeting
> > protocol into
> > >>>>>>> consideration. But I’ve recommended an alternative.
> > >>>>>>>
> > >>>>>>> Hope this helps somewhat.
> > >>>>>>>
> > >>>>>>> Again, it is important to stress that it would be
> useful to
> > >>>>>>> identify server specs, browser versions and so on.
> > >>>>>>>
> > >>>>>>> All the best, Denis.
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>> Sent from my iPhone
> > >>>>>>>
> > >>>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
> > >>>>>>>> <kaffeesurrogat@posteo.de
> <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>
> <mailto:kaffeesurrogat@posteo.de <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>>> wrote:
> > >>>>>>>>
> > >>>>>>>> Dear Maxim, dear Alvaro, dear ....
> > >>>>>>>>
> > >>>>>>>> i did use a linux machine and a windows machine to test
> > my setup
> > >>>>>>>> .....
> > >>>>>>>> I'm quite shure that I made a config mistake, but
> which one ?
> > >>>>>>>>
> > >>>>>>>> Many thanks for your testing and trying,
> > >>>>>>>>
> > >>>>>>>> kaffeesurrogat ....
> > >>>>>>>>
> > >>>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
> > >>>>>>>>> Hi,
> > >>>>>>>>>
> > >>>>>>>>> Are you using two different systems for two logins or
> > just one
> > >>>>>>>>> system
> > >>>>>>>>> with two browser
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
> > >>>>>>>>> <solomax666@gmail.com
> <ma...@gmail.com> <mailto:solomax666@gmail.com
> <ma...@gmail.com>>
> > <mailto:solomax666@gmail.com <ma...@gmail.com>
> <mailto:solomax666@gmail.com <ma...@gmail.com>>>
> > >>>>>>>>> <mailto:solomax666@gmail.com
> <ma...@gmail.com>
> > <mailto:solomax666@gmail.com
> <ma...@gmail.com>>>> wrote:
> > >>>>>>>>>
> > >>>>>>>>> I'll try to test your steps
> > >>>>>>>>> will take some time ....
> > >>>>>>>>>
> > >>>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
> > >>>>>>>>> <kaffeesurrogat@posteo.de
> <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>
> <mailto:kaffeesurrogat@posteo.de <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>>
> > >>>>>>>>> <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>>> wrote:
> > >>>>>>>>>
> > >>>>>>>>> Dear List,
> > >>>>>>>>>
> > >>>>>>>>> many thanks for your new release. I feel ashamed,
> > that I have
> > >>>>>>>>> to ask
> > >>>>>>>>> again and again on this list.
> > >>>>>>>>>
> > >>>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04
> LTS and I've
> > >>>>>>>>> followed the
> > >>>>>>>>> guides from the wiki.
> > >>>>>>>>>
> > >>>>>>>>> I can open up my camera and mic. The following is
> > happening:
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> 1) moderator enters the rom while nobody is there
> > (chrome).
> > >>>>>>>>> 2) second user enters the room. Both enable there
> > camera and
> > >>>>>>>>> mic. fine
> > >>>>>>>>> :-) (firefox)
> > >>>>>>>>> 3) The moderator leaves the room and the second
> > users sees a
> > >>>>>>>>> message to
> > >>>>>>>>> be patient until the moderator enters the
> room again.
> > >>>>>>>>> 4) moderators reenters the room, both cameras are
> > turned off
> > >>>>>>>>> 5) second users turns on his camera ....
> > >>>>>>>>>
> > >>>>>>>>> quite a few error messages show up, the
> camera
> > window is
> > >>>>>>>>> blue and
> > >>>>>>>>> blank on the second users screen, on the
> moderator
> > screens i
> > >>>>>>>>> can see only the questionmarkman ...
> > >>>>>>>>>
> > >>>>>>>>> I've attached all of my config files and some
> > screenshots as
> > >>>>>>>>> png ...
> > >>>>>>>>>
> > >>>>>>>>> I did check the coturn server with trickle
> ... also
> > attached
> > >>>>>>>>>
> > >>>>>>>>> I did attache a screen shot of the moderator
> account,
> > >>>>>>>>> several mic
> > >>>>>>>>> symbols on the screen
> > >>>>>>>>>
> > >>>>>>>>> The invalidStateError appears on the second users
> > screen
> > >>>>>>>>>
> > >>>>>>>>> The RtcPeerConnection on the moderator screen
> .....
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> I'm lost .... already double checked my config
> > files and
> > >>>>>>>>> reread the
> > >>>>>>>>> installation manuals ....
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> Many thanks,
> > >>>>>>>>>
> > >>>>>>>>> kaffeesurogat
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> --
> > >>>>>>>>> Best regards,
> > >>>>>>>>> Maxim
> > >>>>>>>>>
> > >>>
> > >
> >
> >
> >
> > --
> > Best regards,
> > Maxim
>
>
>
> --
> Best regards,
> Maxim
Re: proplems with new release, room configs are different ...
Posted by Maxim Solodovnik <so...@gmail.com>.
@kaffeesurrogat, can you please check if latest snapshot from here
https://ci-builds.apache.org/job/OpenMeetings/job/openmeetings/ works
better?
On Tue, 1 Sep 2020 at 13:21, kaffeesurrogat <ka...@posteo.de>
wrote:
> @Maxim: Thanks for letting me know ;-)
>
>
>
> On 31/08/2020 18:07, Maxim Solodovnik wrote:
> > FTR https://issues.apache.org/jira/browse/OPENMEETINGS-2424
> >
> > On Mon, 31 Aug 2020 at 14:10, Denis Noctor <denisnoctor@gmail.com
> > <ma...@gmail.com>> wrote:
> >
> > Hi there @kaffeesurrogat... did you ever get that problem sorted
> > in the end?
> >
> > Sent from my iPhone
> >
> > > On Aug 26, 2020, at 12:49 PM, kaffeesurrogat
> > <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
> > >
> > >
> > >
> > >> On 26/08/2020 18:46, Denis Noctor wrote:
> > >> If you take a look at this...
> > >> https://openmeetings.apache.org/
> > >>
> > >> Near the bottom of the page you will notice one of the changes /
> > >> improvements... “Direct link for entering the room with room
> > name (not
> > >> ID)”
> > >>
> > >> As a result... maybe... there are some field changes (additions)
> to
> > >> the database.
> > >
> > > you might be right ;-)
> > >
> > >>
> > >> You previously mentioned: 2 rooms, 2 different servers, 2
> different
> > >> versions of OM. I would keep everything the same... same
> > version of OM.
> > >
> > > sorry, that was some kind of missunderstanding. all my testing
> > were done
> > > with one server OM 5.0.0 (new release) on it
> > >
> > >
> > >>
> > >> I’ve tried to reproduce this on my set up... using one server,
> > 2 users
> > >> logged into the same room (one using updated version of Chrome
> > and the
> > >> other using updated Firefox), one install of OM on server and
> > >> everything works fine.
> > >
> > >
> > >
> > >
> > >
> > >> Sent from my iPhone
> > >>
> > >> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat
> > <kaffeesurrogat@posteo.de <ma...@posteo.de>
> > >> <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>> wrote:
> > >>
> > >>>
> > >>>
> > >>>> On 26/08/2020 18:16, Denis Noctor wrote:
> > >>>> So let me get try to get my head around this... because I didn’t
> > >>>> notice you mention this before...
> > >>> that's right .... i just noticed it a few minutes ago .....
> > >>>
> > >>>
> > >>>> Are you trying to set up a “clustering environment”.... using 2
> > >>>> different versions of OM?
> > >>>
> > >>> no ... i have one machine to make changes and updates one for
> > daily use
> > >>> no clustering at all ;-)
> > >>>
> > >>>
> > >>>
> > >>>> Sent from my iPhone
> > >>>
> > >>>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
> > >>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>
> > <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>> wrote:
> > >>>>>
> > >>>>> Me again,
> > >>>>>
> > >>>>> i made comparison between the my conference rooms.
> > >>>>>
> > >>>>> First conference room runs on server 1, older version of
> > >>>>> openmeetings ...
> > >>>>> Second conference room runs on server 2, new release of
> > openmeetings
> > >>>>> with several mic problem ....
> > >>>>>
> > >>>>> the room on server 2 does not have an Owner ID .... mmmmmm
> .....
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
> > >>>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so
> > >>>>>> many ;-)
> > >>>>>>
> > >>>>>> i checked, if this is reproducible. I've made a note of every
> > >>>>>> single step:
> > >>>>>>
> > >>>>>>
> > >>>>>> 1) login user 1 (moderator)
> > >>>>>> 2) user 1 entering private room
> > >>>>>> 3) user 1 turns camera and mic on
> > >>>>>> 4) login user 2 (not a moderator)
> > >>>>>> 5) user 2 is entering private room
> > >>>>>> 6) user 2 requests permissions to use camera and mic
> > >>>>>> 7) user 1 grants permissions to use camera and mic via
> > activities and
> > >>>>>> actions
> > >>>>>> 8) user 2 turns on camera and mic
> > >>>>>> user 1 and user 2 see/hear each other
> > >>>>>> 9) user 1 leaves the room
> > >>>>>> user 2 sees "wait for moderator..." message
> > >>>>>> 10) user 1 re-enters the room
> > >>>>>> wait for moderator dissapears
> > >>>>>> user 1/user 2 cameras/mics off
> > >>>>>> 11) user 1 turns cam/mic back on
> > >>>>>> => user 2 sees user 1
> > >>>>>> 12) user 2 turns cam/mic back on
> > >>>>>> => user 1 does not see user 2 (question mark face ...)
> > >>>>>> => several mic symbols displayed on user 2 - browser for
> > user
> > >>>>>> 2.....
> > >>>>>>
> > >>>>>> see attached pic ....
> > >>>>>>
> > >>>>>> user1
> > >>>>>>
> > >>>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux
> > machine
> > >>>>>>
> > >>>>>> user 2
> > >>>>>>
> > >>>>>> Firefox 79 (64 Bit)
> > >>>>>> Windows 10
> > >>>>>>
> > >>>>>> user 1 and user 2 both on the same network different machines
> > >>>>>>
> > >>>>>> server
> > >>>>>>
> > >>>>>> ubuntu 18.04 LTS
> > >>>>>>
> > >>>>>> openmeetings ...
> > >>>>>>
> > >>>>>> Version
> > >>>>>> 5.0.0
> > >>>>>> Revision
> > >>>>>> 422e22f
> > >>>>>> Build date
> > >>>>>> 2020-08-18T00:21:52Z
> > >>>>>>
> > >>>>>> Many thanks again,
> > >>>>>>
> > >>>>>> kaffeesurrogat
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
> > >>>>>>> @kaffeesurrogat,
> > >>>>>>>
> > >>>>>>> First of all can you confirm that you can see and hear at
> > least 2
> > >>>>>>> users in a room as it is a little unclear... and if you’ve
> > read
> > >>>>>>> my previous email.
> > >>>>>> yes there are two users in the room. the can hear an see each
> > >>>>>> other ....
> > >>>>>>
> > >>>>>>> I won’t be able to respond immediately as I am on the the
> > other
> > >>>>>>> side of the planet and am heading off to bed...
> > (1.38am)... but I
> > >>>>>>> am curious to see if you have been able to reproduce this
> > >>>>>>> scenario more than once... as it is not very clear from
> > your posts.
> > >>>>>> yes .....
> > >>>>>>
> > >>>>>>> The situation you described might be exceptionally rare...
> > as I
> > >>>>>>> can’t see the reason for a moderator to leave a room when
> > others
> > >>>>>>> are in it... and as a result this scenario might be an
> > >>>>>>> oversight... but a very small one... taking meeting
> > protocol into
> > >>>>>>> consideration. But I’ve recommended an alternative.
> > >>>>>>>
> > >>>>>>> Hope this helps somewhat.
> > >>>>>>>
> > >>>>>>> Again, it is important to stress that it would be useful to
> > >>>>>>> identify server specs, browser versions and so on.
> > >>>>>>>
> > >>>>>>> All the best, Denis.
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>> Sent from my iPhone
> > >>>>>>>
> > >>>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
> > >>>>>>>> <kaffeesurrogat@posteo.de
> > <ma...@posteo.de> <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>> wrote:
> > >>>>>>>>
> > >>>>>>>> Dear Maxim, dear Alvaro, dear ....
> > >>>>>>>>
> > >>>>>>>> i did use a linux machine and a windows machine to test
> > my setup
> > >>>>>>>> .....
> > >>>>>>>> I'm quite shure that I made a config mistake, but which one
> ?
> > >>>>>>>>
> > >>>>>>>> Many thanks for your testing and trying,
> > >>>>>>>>
> > >>>>>>>> kaffeesurrogat ....
> > >>>>>>>>
> > >>>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
> > >>>>>>>>> Hi,
> > >>>>>>>>>
> > >>>>>>>>> Are you using two different systems for two logins or
> > just one
> > >>>>>>>>> system
> > >>>>>>>>> with two browser
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
> > >>>>>>>>> <solomax666@gmail.com <ma...@gmail.com>
> > <mailto:solomax666@gmail.com <ma...@gmail.com>>
> > >>>>>>>>> <mailto:solomax666@gmail.com
> > <ma...@gmail.com>>> wrote:
> > >>>>>>>>>
> > >>>>>>>>> I'll try to test your steps
> > >>>>>>>>> will take some time ....
> > >>>>>>>>>
> > >>>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
> > >>>>>>>>> <kaffeesurrogat@posteo.de
> > <ma...@posteo.de> <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>
> > >>>>>>>>> <mailto:kaffeesurrogat@posteo.de
> > <ma...@posteo.de>>> wrote:
> > >>>>>>>>>
> > >>>>>>>>> Dear List,
> > >>>>>>>>>
> > >>>>>>>>> many thanks for your new release. I feel ashamed,
> > that I have
> > >>>>>>>>> to ask
> > >>>>>>>>> again and again on this list.
> > >>>>>>>>>
> > >>>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and
> I've
> > >>>>>>>>> followed the
> > >>>>>>>>> guides from the wiki.
> > >>>>>>>>>
> > >>>>>>>>> I can open up my camera and mic. The following is
> > happening:
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> 1) moderator enters the rom while nobody is there
> > (chrome).
> > >>>>>>>>> 2) second user enters the room. Both enable there
> > camera and
> > >>>>>>>>> mic. fine
> > >>>>>>>>> :-) (firefox)
> > >>>>>>>>> 3) The moderator leaves the room and the second
> > users sees a
> > >>>>>>>>> message to
> > >>>>>>>>> be patient until the moderator enters the room again.
> > >>>>>>>>> 4) moderators reenters the room, both cameras are
> > turned off
> > >>>>>>>>> 5) second users turns on his camera ....
> > >>>>>>>>>
> > >>>>>>>>> quite a few error messages show up, the camera
> > window is
> > >>>>>>>>> blue and
> > >>>>>>>>> blank on the second users screen, on the moderator
> > screens i
> > >>>>>>>>> can see only the questionmarkman ...
> > >>>>>>>>>
> > >>>>>>>>> I've attached all of my config files and some
> > screenshots as
> > >>>>>>>>> png ...
> > >>>>>>>>>
> > >>>>>>>>> I did check the coturn server with trickle ... also
> > attached
> > >>>>>>>>>
> > >>>>>>>>> I did attache a screen shot of the moderator account,
> > >>>>>>>>> several mic
> > >>>>>>>>> symbols on the screen
> > >>>>>>>>>
> > >>>>>>>>> The invalidStateError appears on the second users
> > screen
> > >>>>>>>>>
> > >>>>>>>>> The RtcPeerConnection on the moderator screen .....
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> I'm lost .... already double checked my config
> > files and
> > >>>>>>>>> reread the
> > >>>>>>>>> installation manuals ....
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> Many thanks,
> > >>>>>>>>>
> > >>>>>>>>> kaffeesurogat
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> --
> > >>>>>>>>> Best regards,
> > >>>>>>>>> Maxim
> > >>>>>>>>>
> > >>>
> > >
> >
> >
> >
> > --
> > Best regards,
> > Maxim
>
>
--
Best regards,
Maxim
Re: proplems with new release, room configs are different ...
Posted by kaffeesurrogat <ka...@posteo.de>.
@Maxim: Thanks for letting me know ;-)
On 31/08/2020 18:07, Maxim Solodovnik wrote:
> FTR https://issues.apache.org/jira/browse/OPENMEETINGS-2424
>
> On Mon, 31 Aug 2020 at 14:10, Denis Noctor <denisnoctor@gmail.com
> <ma...@gmail.com>> wrote:
>
> Hi there @kaffeesurrogat... did you ever get that problem sorted
> in the end?
>
> Sent from my iPhone
>
> > On Aug 26, 2020, at 12:49 PM, kaffeesurrogat
> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
> >
> >
> >
> >> On 26/08/2020 18:46, Denis Noctor wrote:
> >> If you take a look at this...
> >> https://openmeetings.apache.org/
> >>
> >> Near the bottom of the page you will notice one of the changes /
> >> improvements... “Direct link for entering the room with room
> name (not
> >> ID)”
> >>
> >> As a result... maybe... there are some field changes (additions) to
> >> the database.
> >
> > you might be right ;-)
> >
> >>
> >> You previously mentioned: 2 rooms, 2 different servers, 2 different
> >> versions of OM. I would keep everything the same... same
> version of OM.
> >
> > sorry, that was some kind of missunderstanding. all my testing
> were done
> > with one server OM 5.0.0 (new release) on it
> >
> >
> >>
> >> I’ve tried to reproduce this on my set up... using one server,
> 2 users
> >> logged into the same room (one using updated version of Chrome
> and the
> >> other using updated Firefox), one install of OM on server and
> >> everything works fine.
> >
> >
> >
> >
> >
> >> Sent from my iPhone
> >>
> >> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat
> <kaffeesurrogat@posteo.de <ma...@posteo.de>
> >> <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>> wrote:
> >>
> >>>
> >>>
> >>>> On 26/08/2020 18:16, Denis Noctor wrote:
> >>>> So let me get try to get my head around this... because I didn’t
> >>>> notice you mention this before...
> >>> that's right .... i just noticed it a few minutes ago .....
> >>>
> >>>
> >>>> Are you trying to set up a “clustering environment”.... using 2
> >>>> different versions of OM?
> >>>
> >>> no ... i have one machine to make changes and updates one for
> daily use
> >>> no clustering at all ;-)
> >>>
> >>>
> >>>
> >>>> Sent from my iPhone
> >>>
> >>>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
> >>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>
> <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>> wrote:
> >>>>>
> >>>>> Me again,
> >>>>>
> >>>>> i made comparison between the my conference rooms.
> >>>>>
> >>>>> First conference room runs on server 1, older version of
> >>>>> openmeetings ...
> >>>>> Second conference room runs on server 2, new release of
> openmeetings
> >>>>> with several mic problem ....
> >>>>>
> >>>>> the room on server 2 does not have an Owner ID .... mmmmmm .....
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
> >>>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so
> >>>>>> many ;-)
> >>>>>>
> >>>>>> i checked, if this is reproducible. I've made a note of every
> >>>>>> single step:
> >>>>>>
> >>>>>>
> >>>>>> 1) login user 1 (moderator)
> >>>>>> 2) user 1 entering private room
> >>>>>> 3) user 1 turns camera and mic on
> >>>>>> 4) login user 2 (not a moderator)
> >>>>>> 5) user 2 is entering private room
> >>>>>> 6) user 2 requests permissions to use camera and mic
> >>>>>> 7) user 1 grants permissions to use camera and mic via
> activities and
> >>>>>> actions
> >>>>>> 8) user 2 turns on camera and mic
> >>>>>> user 1 and user 2 see/hear each other
> >>>>>> 9) user 1 leaves the room
> >>>>>> user 2 sees "wait for moderator..." message
> >>>>>> 10) user 1 re-enters the room
> >>>>>> wait for moderator dissapears
> >>>>>> user 1/user 2 cameras/mics off
> >>>>>> 11) user 1 turns cam/mic back on
> >>>>>> => user 2 sees user 1
> >>>>>> 12) user 2 turns cam/mic back on
> >>>>>> => user 1 does not see user 2 (question mark face ...)
> >>>>>> => several mic symbols displayed on user 2 - browser for
> user
> >>>>>> 2.....
> >>>>>>
> >>>>>> see attached pic ....
> >>>>>>
> >>>>>> user1
> >>>>>>
> >>>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux
> machine
> >>>>>>
> >>>>>> user 2
> >>>>>>
> >>>>>> Firefox 79 (64 Bit)
> >>>>>> Windows 10
> >>>>>>
> >>>>>> user 1 and user 2 both on the same network different machines
> >>>>>>
> >>>>>> server
> >>>>>>
> >>>>>> ubuntu 18.04 LTS
> >>>>>>
> >>>>>> openmeetings ...
> >>>>>>
> >>>>>> Version
> >>>>>> 5.0.0
> >>>>>> Revision
> >>>>>> 422e22f
> >>>>>> Build date
> >>>>>> 2020-08-18T00:21:52Z
> >>>>>>
> >>>>>> Many thanks again,
> >>>>>>
> >>>>>> kaffeesurrogat
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
> >>>>>>> @kaffeesurrogat,
> >>>>>>>
> >>>>>>> First of all can you confirm that you can see and hear at
> least 2
> >>>>>>> users in a room as it is a little unclear... and if you’ve
> read
> >>>>>>> my previous email.
> >>>>>> yes there are two users in the room. the can hear an see each
> >>>>>> other ....
> >>>>>>
> >>>>>>> I won’t be able to respond immediately as I am on the the
> other
> >>>>>>> side of the planet and am heading off to bed...
> (1.38am)... but I
> >>>>>>> am curious to see if you have been able to reproduce this
> >>>>>>> scenario more than once... as it is not very clear from
> your posts.
> >>>>>> yes .....
> >>>>>>
> >>>>>>> The situation you described might be exceptionally rare...
> as I
> >>>>>>> can’t see the reason for a moderator to leave a room when
> others
> >>>>>>> are in it... and as a result this scenario might be an
> >>>>>>> oversight... but a very small one... taking meeting
> protocol into
> >>>>>>> consideration. But I’ve recommended an alternative.
> >>>>>>>
> >>>>>>> Hope this helps somewhat.
> >>>>>>>
> >>>>>>> Again, it is important to stress that it would be useful to
> >>>>>>> identify server specs, browser versions and so on.
> >>>>>>>
> >>>>>>> All the best, Denis.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Sent from my iPhone
> >>>>>>>
> >>>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
> >>>>>>>> <kaffeesurrogat@posteo.de
> <ma...@posteo.de> <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>> wrote:
> >>>>>>>>
> >>>>>>>> Dear Maxim, dear Alvaro, dear ....
> >>>>>>>>
> >>>>>>>> i did use a linux machine and a windows machine to test
> my setup
> >>>>>>>> .....
> >>>>>>>> I'm quite shure that I made a config mistake, but which one ?
> >>>>>>>>
> >>>>>>>> Many thanks for your testing and trying,
> >>>>>>>>
> >>>>>>>> kaffeesurrogat ....
> >>>>>>>>
> >>>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
> >>>>>>>>> Hi,
> >>>>>>>>>
> >>>>>>>>> Are you using two different systems for two logins or
> just one
> >>>>>>>>> system
> >>>>>>>>> with two browser
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
> >>>>>>>>> <solomax666@gmail.com <ma...@gmail.com>
> <mailto:solomax666@gmail.com <ma...@gmail.com>>
> >>>>>>>>> <mailto:solomax666@gmail.com
> <ma...@gmail.com>>> wrote:
> >>>>>>>>>
> >>>>>>>>> I'll try to test your steps
> >>>>>>>>> will take some time ....
> >>>>>>>>>
> >>>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
> >>>>>>>>> <kaffeesurrogat@posteo.de
> <ma...@posteo.de> <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>
> >>>>>>>>> <mailto:kaffeesurrogat@posteo.de
> <ma...@posteo.de>>> wrote:
> >>>>>>>>>
> >>>>>>>>> Dear List,
> >>>>>>>>>
> >>>>>>>>> many thanks for your new release. I feel ashamed,
> that I have
> >>>>>>>>> to ask
> >>>>>>>>> again and again on this list.
> >>>>>>>>>
> >>>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
> >>>>>>>>> followed the
> >>>>>>>>> guides from the wiki.
> >>>>>>>>>
> >>>>>>>>> I can open up my camera and mic. The following is
> happening:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> 1) moderator enters the rom while nobody is there
> (chrome).
> >>>>>>>>> 2) second user enters the room. Both enable there
> camera and
> >>>>>>>>> mic. fine
> >>>>>>>>> :-) (firefox)
> >>>>>>>>> 3) The moderator leaves the room and the second
> users sees a
> >>>>>>>>> message to
> >>>>>>>>> be patient until the moderator enters the room again.
> >>>>>>>>> 4) moderators reenters the room, both cameras are
> turned off
> >>>>>>>>> 5) second users turns on his camera ....
> >>>>>>>>>
> >>>>>>>>> quite a few error messages show up, the camera
> window is
> >>>>>>>>> blue and
> >>>>>>>>> blank on the second users screen, on the moderator
> screens i
> >>>>>>>>> can see only the questionmarkman ...
> >>>>>>>>>
> >>>>>>>>> I've attached all of my config files and some
> screenshots as
> >>>>>>>>> png ...
> >>>>>>>>>
> >>>>>>>>> I did check the coturn server with trickle ... also
> attached
> >>>>>>>>>
> >>>>>>>>> I did attache a screen shot of the moderator account,
> >>>>>>>>> several mic
> >>>>>>>>> symbols on the screen
> >>>>>>>>>
> >>>>>>>>> The invalidStateError appears on the second users
> screen
> >>>>>>>>>
> >>>>>>>>> The RtcPeerConnection on the moderator screen .....
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> I'm lost .... already double checked my config
> files and
> >>>>>>>>> reread the
> >>>>>>>>> installation manuals ....
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Many thanks,
> >>>>>>>>>
> >>>>>>>>> kaffeesurogat
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> --
> >>>>>>>>> Best regards,
> >>>>>>>>> Maxim
> >>>>>>>>>
> >>>
> >
>
>
>
> --
> Best regards,
> Maxim
Re: proplems with new release, room configs are different ...
Posted by Maxim Solodovnik <so...@gmail.com>.
FTR https://issues.apache.org/jira/browse/OPENMEETINGS-2424
On Mon, 31 Aug 2020 at 14:10, Denis Noctor <de...@gmail.com> wrote:
> Hi there @kaffeesurrogat... did you ever get that problem sorted in the
> end?
>
> Sent from my iPhone
>
> > On Aug 26, 2020, at 12:49 PM, kaffeesurrogat <ka...@posteo.de>
> wrote:
> >
> >
> >
> >> On 26/08/2020 18:46, Denis Noctor wrote:
> >> If you take a look at this...
> >> https://openmeetings.apache.org/
> >>
> >> Near the bottom of the page you will notice one of the changes /
> >> improvements... “Direct link for entering the room with room name (not
> >> ID)”
> >>
> >> As a result... maybe... there are some field changes (additions) to
> >> the database.
> >
> > you might be right ;-)
> >
> >>
> >> You previously mentioned: 2 rooms, 2 different servers, 2 different
> >> versions of OM. I would keep everything the same... same version of OM.
> >
> > sorry, that was some kind of missunderstanding. all my testing were done
> > with one server OM 5.0.0 (new release) on it
> >
> >
> >>
> >> I’ve tried to reproduce this on my set up... using one server, 2 users
> >> logged into the same room (one using updated version of Chrome and the
> >> other using updated Firefox), one install of OM on server and
> >> everything works fine.
> >
> >
> >
> >
> >
> >> Sent from my iPhone
> >>
> >> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat <kaffeesurrogat@posteo.de
> >> <ma...@posteo.de>> wrote:
> >>
> >>>
> >>>
> >>>> On 26/08/2020 18:16, Denis Noctor wrote:
> >>>> So let me get try to get my head around this... because I didn’t
> >>>> notice you mention this before...
> >>> that's right .... i just noticed it a few minutes ago .....
> >>>
> >>>
> >>>> Are you trying to set up a “clustering environment”.... using 2
> >>>> different versions of OM?
> >>>
> >>> no ... i have one machine to make changes and updates one for daily use
> >>> no clustering at all ;-)
> >>>
> >>>
> >>>
> >>>> Sent from my iPhone
> >>>
> >>>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
> >>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
> >>>>>
> >>>>> Me again,
> >>>>>
> >>>>> i made comparison between the my conference rooms.
> >>>>>
> >>>>> First conference room runs on server 1, older version of
> >>>>> openmeetings ...
> >>>>> Second conference room runs on server 2, new release of openmeetings
> >>>>> with several mic problem ....
> >>>>>
> >>>>> the room on server 2 does not have an Owner ID .... mmmmmm .....
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
> >>>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so
> >>>>>> many ;-)
> >>>>>>
> >>>>>> i checked, if this is reproducible. I've made a note of every
> >>>>>> single step:
> >>>>>>
> >>>>>>
> >>>>>> 1) login user 1 (moderator)
> >>>>>> 2) user 1 entering private room
> >>>>>> 3) user 1 turns camera and mic on
> >>>>>> 4) login user 2 (not a moderator)
> >>>>>> 5) user 2 is entering private room
> >>>>>> 6) user 2 requests permissions to use camera and mic
> >>>>>> 7) user 1 grants permissions to use camera and mic via activities
> and
> >>>>>> actions
> >>>>>> 8) user 2 turns on camera and mic
> >>>>>> user 1 and user 2 see/hear each other
> >>>>>> 9) user 1 leaves the room
> >>>>>> user 2 sees "wait for moderator..." message
> >>>>>> 10) user 1 re-enters the room
> >>>>>> wait for moderator dissapears
> >>>>>> user 1/user 2 cameras/mics off
> >>>>>> 11) user 1 turns cam/mic back on
> >>>>>> => user 2 sees user 1
> >>>>>> 12) user 2 turns cam/mic back on
> >>>>>> => user 1 does not see user 2 (question mark face ...)
> >>>>>> => several mic symbols displayed on user 2 - browser for user
> >>>>>> 2.....
> >>>>>>
> >>>>>> see attached pic ....
> >>>>>>
> >>>>>> user1
> >>>>>>
> >>>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
> >>>>>>
> >>>>>> user 2
> >>>>>>
> >>>>>> Firefox 79 (64 Bit)
> >>>>>> Windows 10
> >>>>>>
> >>>>>> user 1 and user 2 both on the same network different machines
> >>>>>>
> >>>>>> server
> >>>>>>
> >>>>>> ubuntu 18.04 LTS
> >>>>>>
> >>>>>> openmeetings ...
> >>>>>>
> >>>>>> Version
> >>>>>> 5.0.0
> >>>>>> Revision
> >>>>>> 422e22f
> >>>>>> Build date
> >>>>>> 2020-08-18T00:21:52Z
> >>>>>>
> >>>>>> Many thanks again,
> >>>>>>
> >>>>>> kaffeesurrogat
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
> >>>>>>> @kaffeesurrogat,
> >>>>>>>
> >>>>>>> First of all can you confirm that you can see and hear at least 2
> >>>>>>> users in a room as it is a little unclear... and if you’ve read
> >>>>>>> my previous email.
> >>>>>> yes there are two users in the room. the can hear an see each
> >>>>>> other ....
> >>>>>>
> >>>>>>> I won’t be able to respond immediately as I am on the the other
> >>>>>>> side of the planet and am heading off to bed... (1.38am)... but I
> >>>>>>> am curious to see if you have been able to reproduce this
> >>>>>>> scenario more than once... as it is not very clear from your posts.
> >>>>>> yes .....
> >>>>>>
> >>>>>>> The situation you described might be exceptionally rare... as I
> >>>>>>> can’t see the reason for a moderator to leave a room when others
> >>>>>>> are in it... and as a result this scenario might be an
> >>>>>>> oversight... but a very small one... taking meeting protocol into
> >>>>>>> consideration. But I’ve recommended an alternative.
> >>>>>>>
> >>>>>>> Hope this helps somewhat.
> >>>>>>>
> >>>>>>> Again, it is important to stress that it would be useful to
> >>>>>>> identify server specs, browser versions and so on.
> >>>>>>>
> >>>>>>> All the best, Denis.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> Sent from my iPhone
> >>>>>>>
> >>>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
> >>>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>>
> wrote:
> >>>>>>>>
> >>>>>>>> Dear Maxim, dear Alvaro, dear ....
> >>>>>>>>
> >>>>>>>> i did use a linux machine and a windows machine to test my setup
> >>>>>>>> .....
> >>>>>>>> I'm quite shure that I made a config mistake, but which one ?
> >>>>>>>>
> >>>>>>>> Many thanks for your testing and trying,
> >>>>>>>>
> >>>>>>>> kaffeesurrogat ....
> >>>>>>>>
> >>>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
> >>>>>>>>> Hi,
> >>>>>>>>>
> >>>>>>>>> Are you using two different systems for two logins or just one
> >>>>>>>>> system
> >>>>>>>>> with two browser
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
> >>>>>>>>> <solomax666@gmail.com <ma...@gmail.com>
> >>>>>>>>> <ma...@gmail.com>> wrote:
> >>>>>>>>>
> >>>>>>>>> I'll try to test your steps
> >>>>>>>>> will take some time ....
> >>>>>>>>>
> >>>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
> >>>>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>
> >>>>>>>>> <ma...@posteo.de>> wrote:
> >>>>>>>>>
> >>>>>>>>> Dear List,
> >>>>>>>>>
> >>>>>>>>> many thanks for your new release. I feel ashamed, that I
> have
> >>>>>>>>> to ask
> >>>>>>>>> again and again on this list.
> >>>>>>>>>
> >>>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
> >>>>>>>>> followed the
> >>>>>>>>> guides from the wiki.
> >>>>>>>>>
> >>>>>>>>> I can open up my camera and mic. The following is happening:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> 1) moderator enters the rom while nobody is there (chrome).
> >>>>>>>>> 2) second user enters the room. Both enable there camera and
> >>>>>>>>> mic. fine
> >>>>>>>>> :-) (firefox)
> >>>>>>>>> 3) The moderator leaves the room and the second users sees a
> >>>>>>>>> message to
> >>>>>>>>> be patient until the moderator enters the room again.
> >>>>>>>>> 4) moderators reenters the room, both cameras are turned off
> >>>>>>>>> 5) second users turns on his camera ....
> >>>>>>>>>
> >>>>>>>>> quite a few error messages show up, the camera window is
> >>>>>>>>> blue and
> >>>>>>>>> blank on the second users screen, on the moderator screens i
> >>>>>>>>> can see only the questionmarkman ...
> >>>>>>>>>
> >>>>>>>>> I've attached all of my config files and some screenshots as
> >>>>>>>>> png ...
> >>>>>>>>>
> >>>>>>>>> I did check the coturn server with trickle ... also attached
> >>>>>>>>>
> >>>>>>>>> I did attache a screen shot of the moderator account,
> >>>>>>>>> several mic
> >>>>>>>>> symbols on the screen
> >>>>>>>>>
> >>>>>>>>> The invalidStateError appears on the second users screen
> >>>>>>>>>
> >>>>>>>>> The RtcPeerConnection on the moderator screen .....
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> I'm lost .... already double checked my config files and
> >>>>>>>>> reread the
> >>>>>>>>> installation manuals ....
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Many thanks,
> >>>>>>>>>
> >>>>>>>>> kaffeesurogat
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> --
> >>>>>>>>> Best regards,
> >>>>>>>>> Maxim
> >>>>>>>>>
> >>>
> >
>
--
Best regards,
Maxim
Re: proplems with new release, room configs are different ...
Posted by Denis Noctor <de...@gmail.com>.
Hi there @kaffeesurrogat... did you ever get that problem sorted in the end?
Sent from my iPhone
> On Aug 26, 2020, at 12:49 PM, kaffeesurrogat <ka...@posteo.de> wrote:
>
>
>
>> On 26/08/2020 18:46, Denis Noctor wrote:
>> If you take a look at this...
>> https://openmeetings.apache.org/
>>
>> Near the bottom of the page you will notice one of the changes /
>> improvements... “Direct link for entering the room with room name (not
>> ID)”
>>
>> As a result... maybe... there are some field changes (additions) to
>> the database.
>
> you might be right ;-)
>
>>
>> You previously mentioned: 2 rooms, 2 different servers, 2 different
>> versions of OM. I would keep everything the same... same version of OM.
>
> sorry, that was some kind of missunderstanding. all my testing were done
> with one server OM 5.0.0 (new release) on it
>
>
>>
>> I’ve tried to reproduce this on my set up... using one server, 2 users
>> logged into the same room (one using updated version of Chrome and the
>> other using updated Firefox), one install of OM on server and
>> everything works fine.
>
>
>
>
>
>> Sent from my iPhone
>>
>> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat <kaffeesurrogat@posteo.de
>> <ma...@posteo.de>> wrote:
>>
>>>
>>>
>>>> On 26/08/2020 18:16, Denis Noctor wrote:
>>>> So let me get try to get my head around this... because I didn’t
>>>> notice you mention this before...
>>> that's right .... i just noticed it a few minutes ago .....
>>>
>>>
>>>> Are you trying to set up a “clustering environment”.... using 2
>>>> different versions of OM?
>>>
>>> no ... i have one machine to make changes and updates one for daily use
>>> no clustering at all ;-)
>>>
>>>
>>>
>>>> Sent from my iPhone
>>>
>>>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>>>>>
>>>>> Me again,
>>>>>
>>>>> i made comparison between the my conference rooms.
>>>>>
>>>>> First conference room runs on server 1, older version of
>>>>> openmeetings ...
>>>>> Second conference room runs on server 2, new release of openmeetings
>>>>> with several mic problem ....
>>>>>
>>>>> the room on server 2 does not have an Owner ID .... mmmmmm .....
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
>>>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so
>>>>>> many ;-)
>>>>>>
>>>>>> i checked, if this is reproducible. I've made a note of every
>>>>>> single step:
>>>>>>
>>>>>>
>>>>>> 1) login user 1 (moderator)
>>>>>> 2) user 1 entering private room
>>>>>> 3) user 1 turns camera and mic on
>>>>>> 4) login user 2 (not a moderator)
>>>>>> 5) user 2 is entering private room
>>>>>> 6) user 2 requests permissions to use camera and mic
>>>>>> 7) user 1 grants permissions to use camera and mic via activities and
>>>>>> actions
>>>>>> 8) user 2 turns on camera and mic
>>>>>> user 1 and user 2 see/hear each other
>>>>>> 9) user 1 leaves the room
>>>>>> user 2 sees "wait for moderator..." message
>>>>>> 10) user 1 re-enters the room
>>>>>> wait for moderator dissapears
>>>>>> user 1/user 2 cameras/mics off
>>>>>> 11) user 1 turns cam/mic back on
>>>>>> => user 2 sees user 1
>>>>>> 12) user 2 turns cam/mic back on
>>>>>> => user 1 does not see user 2 (question mark face ...)
>>>>>> => several mic symbols displayed on user 2 - browser for user
>>>>>> 2.....
>>>>>>
>>>>>> see attached pic ....
>>>>>>
>>>>>> user1
>>>>>>
>>>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
>>>>>>
>>>>>> user 2
>>>>>>
>>>>>> Firefox 79 (64 Bit)
>>>>>> Windows 10
>>>>>>
>>>>>> user 1 and user 2 both on the same network different machines
>>>>>>
>>>>>> server
>>>>>>
>>>>>> ubuntu 18.04 LTS
>>>>>>
>>>>>> openmeetings ...
>>>>>>
>>>>>> Version
>>>>>> 5.0.0
>>>>>> Revision
>>>>>> 422e22f
>>>>>> Build date
>>>>>> 2020-08-18T00:21:52Z
>>>>>>
>>>>>> Many thanks again,
>>>>>>
>>>>>> kaffeesurrogat
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
>>>>>>> @kaffeesurrogat,
>>>>>>>
>>>>>>> First of all can you confirm that you can see and hear at least 2
>>>>>>> users in a room as it is a little unclear... and if you’ve read
>>>>>>> my previous email.
>>>>>> yes there are two users in the room. the can hear an see each
>>>>>> other ....
>>>>>>
>>>>>>> I won’t be able to respond immediately as I am on the the other
>>>>>>> side of the planet and am heading off to bed... (1.38am)... but I
>>>>>>> am curious to see if you have been able to reproduce this
>>>>>>> scenario more than once... as it is not very clear from your posts.
>>>>>> yes .....
>>>>>>
>>>>>>> The situation you described might be exceptionally rare... as I
>>>>>>> can’t see the reason for a moderator to leave a room when others
>>>>>>> are in it... and as a result this scenario might be an
>>>>>>> oversight... but a very small one... taking meeting protocol into
>>>>>>> consideration. But I’ve recommended an alternative.
>>>>>>>
>>>>>>> Hope this helps somewhat.
>>>>>>>
>>>>>>> Again, it is important to stress that it would be useful to
>>>>>>> identify server specs, browser versions and so on.
>>>>>>>
>>>>>>> All the best, Denis.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Sent from my iPhone
>>>>>>>
>>>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
>>>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>>>>>>>>
>>>>>>>> Dear Maxim, dear Alvaro, dear ....
>>>>>>>>
>>>>>>>> i did use a linux machine and a windows machine to test my setup
>>>>>>>> .....
>>>>>>>> I'm quite shure that I made a config mistake, but which one ?
>>>>>>>>
>>>>>>>> Many thanks for your testing and trying,
>>>>>>>>
>>>>>>>> kaffeesurrogat ....
>>>>>>>>
>>>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> Are you using two different systems for two logins or just one
>>>>>>>>> system
>>>>>>>>> with two browser
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
>>>>>>>>> <solomax666@gmail.com <ma...@gmail.com>
>>>>>>>>> <ma...@gmail.com>> wrote:
>>>>>>>>>
>>>>>>>>> I'll try to test your steps
>>>>>>>>> will take some time ....
>>>>>>>>>
>>>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>>>>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>
>>>>>>>>> <ma...@posteo.de>> wrote:
>>>>>>>>>
>>>>>>>>> Dear List,
>>>>>>>>>
>>>>>>>>> many thanks for your new release. I feel ashamed, that I have
>>>>>>>>> to ask
>>>>>>>>> again and again on this list.
>>>>>>>>>
>>>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
>>>>>>>>> followed the
>>>>>>>>> guides from the wiki.
>>>>>>>>>
>>>>>>>>> I can open up my camera and mic. The following is happening:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 1) moderator enters the rom while nobody is there (chrome).
>>>>>>>>> 2) second user enters the room. Both enable there camera and
>>>>>>>>> mic. fine
>>>>>>>>> :-) (firefox)
>>>>>>>>> 3) The moderator leaves the room and the second users sees a
>>>>>>>>> message to
>>>>>>>>> be patient until the moderator enters the room again.
>>>>>>>>> 4) moderators reenters the room, both cameras are turned off
>>>>>>>>> 5) second users turns on his camera ....
>>>>>>>>>
>>>>>>>>> quite a few error messages show up, the camera window is
>>>>>>>>> blue and
>>>>>>>>> blank on the second users screen, on the moderator screens i
>>>>>>>>> can see only the questionmarkman ...
>>>>>>>>>
>>>>>>>>> I've attached all of my config files and some screenshots as
>>>>>>>>> png ...
>>>>>>>>>
>>>>>>>>> I did check the coturn server with trickle ... also attached
>>>>>>>>>
>>>>>>>>> I did attache a screen shot of the moderator account,
>>>>>>>>> several mic
>>>>>>>>> symbols on the screen
>>>>>>>>>
>>>>>>>>> The invalidStateError appears on the second users screen
>>>>>>>>>
>>>>>>>>> The RtcPeerConnection on the moderator screen .....
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I'm lost .... already double checked my config files and
>>>>>>>>> reread the
>>>>>>>>> installation manuals ....
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Many thanks,
>>>>>>>>>
>>>>>>>>> kaffeesurogat
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Best regards,
>>>>>>>>> Maxim
>>>>>>>>>
>>>
>
Re: proplems with new release, room configs are different ...
Posted by Denis Noctor <de...@gmail.com>.
Well spotted Maxim. When I did a test I didn’t realize when doing so the 2 user accounts I was testing both had moderator permissions. Silly me.
I’m sure @kaffeesurrogat will be happy to hear that it was not only him.
All the best.
Sent from my iPhone
> On Aug 26, 2020, at 8:07 PM, Maxim Solodovnik <so...@gmail.com> wrote:
>
> Hello,
>
> "Owner ID" is not relevant, ignore it
> It seems I was able to reproduce this issue, and investigating right now
>
>> On Thu, 27 Aug 2020 at 00:49, kaffeesurrogat <ka...@posteo.de> wrote:
>>
>>
>> On 26/08/2020 18:46, Denis Noctor wrote:
>> > If you take a look at this...
>> > https://openmeetings.apache.org/
>> >
>> > Near the bottom of the page you will notice one of the changes /
>> > improvements... “Direct link for entering the room with room name (not
>> > ID)”
>> >
>> > As a result... maybe... there are some field changes (additions) to
>> > the database.
>>
>> you might be right ;-)
>>
>> >
>> > You previously mentioned: 2 rooms, 2 different servers, 2 different
>> > versions of OM. I would keep everything the same... same version of OM.
>>
>> sorry, that was some kind of missunderstanding. all my testing were done
>> with one server OM 5.0.0 (new release) on it
>>
>>
>> >
>> > I’ve tried to reproduce this on my set up... using one server, 2 users
>> > logged into the same room (one using updated version of Chrome and the
>> > other using updated Firefox), one install of OM on server and
>> > everything works fine.
>>
>>
>>
>>
>>
>> > Sent from my iPhone
>> >
>> > On Aug 26, 2020, at 11:24 AM, kaffeesurrogat <kaffeesurrogat@posteo.de
>> > <ma...@posteo.de>> wrote:
>> >
>> >>
>> >>
>> >> On 26/08/2020 18:16, Denis Noctor wrote:
>> >>> So let me get try to get my head around this... because I didn’t
>> >>> notice you mention this before...
>> >> that's right .... i just noticed it a few minutes ago .....
>> >>
>> >>
>> >>> Are you trying to set up a “clustering environment”.... using 2
>> >>> different versions of OM?
>> >>
>> >> no ... i have one machine to make changes and updates one for daily use
>> >> no clustering at all ;-)
>> >>
>> >>
>> >>
>> >>> Sent from my iPhone
>> >>
>> >>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
>> >>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>> >>>>
>> >>>> Me again,
>> >>>>
>> >>>> i made comparison between the my conference rooms.
>> >>>>
>> >>>> First conference room runs on server 1, older version of
>> >>>> openmeetings ...
>> >>>> Second conference room runs on server 2, new release of openmeetings
>> >>>> with several mic problem ....
>> >>>>
>> >>>> the room on server 2 does not have an Owner ID .... mmmmmm .....
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
>> >>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so
>> >>>>> many ;-)
>> >>>>>
>> >>>>> i checked, if this is reproducible. I've made a note of every
>> >>>>> single step:
>> >>>>>
>> >>>>>
>> >>>>> 1) login user 1 (moderator)
>> >>>>> 2) user 1 entering private room
>> >>>>> 3) user 1 turns camera and mic on
>> >>>>> 4) login user 2 (not a moderator)
>> >>>>> 5) user 2 is entering private room
>> >>>>> 6) user 2 requests permissions to use camera and mic
>> >>>>> 7) user 1 grants permissions to use camera and mic via activities and
>> >>>>> actions
>> >>>>> 8) user 2 turns on camera and mic
>> >>>>> user 1 and user 2 see/hear each other
>> >>>>> 9) user 1 leaves the room
>> >>>>> user 2 sees "wait for moderator..." message
>> >>>>> 10) user 1 re-enters the room
>> >>>>> wait for moderator dissapears
>> >>>>> user 1/user 2 cameras/mics off
>> >>>>> 11) user 1 turns cam/mic back on
>> >>>>> => user 2 sees user 1
>> >>>>> 12) user 2 turns cam/mic back on
>> >>>>> => user 1 does not see user 2 (question mark face ...)
>> >>>>> => several mic symbols displayed on user 2 - browser for user
>> >>>>> 2.....
>> >>>>>
>> >>>>> see attached pic ....
>> >>>>>
>> >>>>> user1
>> >>>>>
>> >>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
>> >>>>>
>> >>>>> user 2
>> >>>>>
>> >>>>> Firefox 79 (64 Bit)
>> >>>>> Windows 10
>> >>>>>
>> >>>>> user 1 and user 2 both on the same network different machines
>> >>>>>
>> >>>>> server
>> >>>>>
>> >>>>> ubuntu 18.04 LTS
>> >>>>>
>> >>>>> openmeetings ...
>> >>>>>
>> >>>>> Version
>> >>>>> 5.0.0
>> >>>>> Revision
>> >>>>> 422e22f
>> >>>>> Build date
>> >>>>> 2020-08-18T00:21:52Z
>> >>>>>
>> >>>>> Many thanks again,
>> >>>>>
>> >>>>> kaffeesurrogat
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
>> >>>>>> @kaffeesurrogat,
>> >>>>>>
>> >>>>>> First of all can you confirm that you can see and hear at least 2
>> >>>>>> users in a room as it is a little unclear... and if you’ve read
>> >>>>>> my previous email.
>> >>>>> yes there are two users in the room. the can hear an see each
>> >>>>> other ....
>> >>>>>
>> >>>>>> I won’t be able to respond immediately as I am on the the other
>> >>>>>> side of the planet and am heading off to bed... (1.38am)... but I
>> >>>>>> am curious to see if you have been able to reproduce this
>> >>>>>> scenario more than once... as it is not very clear from your posts.
>> >>>>> yes .....
>> >>>>>
>> >>>>>> The situation you described might be exceptionally rare... as I
>> >>>>>> can’t see the reason for a moderator to leave a room when others
>> >>>>>> are in it... and as a result this scenario might be an
>> >>>>>> oversight... but a very small one... taking meeting protocol into
>> >>>>>> consideration. But I’ve recommended an alternative.
>> >>>>>>
>> >>>>>> Hope this helps somewhat.
>> >>>>>>
>> >>>>>> Again, it is important to stress that it would be useful to
>> >>>>>> identify server specs, browser versions and so on.
>> >>>>>>
>> >>>>>> All the best, Denis.
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>> Sent from my iPhone
>> >>>>>>
>> >>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
>> >>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>> >>>>>>>
>> >>>>>>> Dear Maxim, dear Alvaro, dear ....
>> >>>>>>>
>> >>>>>>> i did use a linux machine and a windows machine to test my setup
>> >>>>>>> .....
>> >>>>>>> I'm quite shure that I made a config mistake, but which one ?
>> >>>>>>>
>> >>>>>>> Many thanks for your testing and trying,
>> >>>>>>>
>> >>>>>>> kaffeesurrogat ....
>> >>>>>>>
>> >>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>> >>>>>>>> Hi,
>> >>>>>>>>
>> >>>>>>>> Are you using two different systems for two logins or just one
>> >>>>>>>> system
>> >>>>>>>> with two browser
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
>> >>>>>>>> <solomax666@gmail.com <ma...@gmail.com>
>> >>>>>>>> <ma...@gmail.com>> wrote:
>> >>>>>>>>
>> >>>>>>>> I'll try to test your steps
>> >>>>>>>> will take some time ....
>> >>>>>>>>
>> >>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>> >>>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>
>> >>>>>>>> <ma...@posteo.de>> wrote:
>> >>>>>>>>
>> >>>>>>>> Dear List,
>> >>>>>>>>
>> >>>>>>>> many thanks for your new release. I feel ashamed, that I have
>> >>>>>>>> to ask
>> >>>>>>>> again and again on this list.
>> >>>>>>>>
>> >>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
>> >>>>>>>> followed the
>> >>>>>>>> guides from the wiki.
>> >>>>>>>>
>> >>>>>>>> I can open up my camera and mic. The following is happening:
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> 1) moderator enters the rom while nobody is there (chrome).
>> >>>>>>>> 2) second user enters the room. Both enable there camera and
>> >>>>>>>> mic. fine
>> >>>>>>>> :-) (firefox)
>> >>>>>>>> 3) The moderator leaves the room and the second users sees a
>> >>>>>>>> message to
>> >>>>>>>> be patient until the moderator enters the room again.
>> >>>>>>>> 4) moderators reenters the room, both cameras are turned off
>> >>>>>>>> 5) second users turns on his camera ....
>> >>>>>>>>
>> >>>>>>>> quite a few error messages show up, the camera window is
>> >>>>>>>> blue and
>> >>>>>>>> blank on the second users screen, on the moderator screens i
>> >>>>>>>> can see only the questionmarkman ...
>> >>>>>>>>
>> >>>>>>>> I've attached all of my config files and some screenshots as
>> >>>>>>>> png ...
>> >>>>>>>>
>> >>>>>>>> I did check the coturn server with trickle ... also attached
>> >>>>>>>>
>> >>>>>>>> I did attache a screen shot of the moderator account,
>> >>>>>>>> several mic
>> >>>>>>>> symbols on the screen
>> >>>>>>>>
>> >>>>>>>> The invalidStateError appears on the second users screen
>> >>>>>>>>
>> >>>>>>>> The RtcPeerConnection on the moderator screen .....
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> I'm lost .... already double checked my config files and
>> >>>>>>>> reread the
>> >>>>>>>> installation manuals ....
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> Many thanks,
>> >>>>>>>>
>> >>>>>>>> kaffeesurogat
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> --
>> >>>>>>>> Best regards,
>> >>>>>>>> Maxim
>> >>>>>>>>
>> >>
>>
>
>
> --
> Best regards,
> Maxim
Re: proplems with new release, room configs are different ...
Posted by Maxim Solodovnik <so...@gmail.com>.
Hello,
"Owner ID" is not relevant, ignore it
It seems I was able to reproduce this issue, and investigating right now
On Thu, 27 Aug 2020 at 00:49, kaffeesurrogat <ka...@posteo.de>
wrote:
>
>
> On 26/08/2020 18:46, Denis Noctor wrote:
> > If you take a look at this...
> > https://openmeetings.apache.org/
> >
> > Near the bottom of the page you will notice one of the changes /
> > improvements... “Direct link for entering the room with room name (not
> > ID)”
> >
> > As a result... maybe... there are some field changes (additions) to
> > the database.
>
> you might be right ;-)
>
> >
> > You previously mentioned: 2 rooms, 2 different servers, 2 different
> > versions of OM. I would keep everything the same... same version of OM.
>
> sorry, that was some kind of missunderstanding. all my testing were done
> with one server OM 5.0.0 (new release) on it
>
>
> >
> > I’ve tried to reproduce this on my set up... using one server, 2 users
> > logged into the same room (one using updated version of Chrome and the
> > other using updated Firefox), one install of OM on server and
> > everything works fine.
>
>
>
>
>
> > Sent from my iPhone
> >
> > On Aug 26, 2020, at 11:24 AM, kaffeesurrogat <kaffeesurrogat@posteo.de
> > <ma...@posteo.de>> wrote:
> >
> >>
> >>
> >> On 26/08/2020 18:16, Denis Noctor wrote:
> >>> So let me get try to get my head around this... because I didn’t
> >>> notice you mention this before...
> >> that's right .... i just noticed it a few minutes ago .....
> >>
> >>
> >>> Are you trying to set up a “clustering environment”.... using 2
> >>> different versions of OM?
> >>
> >> no ... i have one machine to make changes and updates one for daily use
> >> no clustering at all ;-)
> >>
> >>
> >>
> >>> Sent from my iPhone
> >>
> >>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
> >>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
> >>>>
> >>>> Me again,
> >>>>
> >>>> i made comparison between the my conference rooms.
> >>>>
> >>>> First conference room runs on server 1, older version of
> >>>> openmeetings ...
> >>>> Second conference room runs on server 2, new release of openmeetings
> >>>> with several mic problem ....
> >>>>
> >>>> the room on server 2 does not have an Owner ID .... mmmmmm .....
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
> >>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so
> >>>>> many ;-)
> >>>>>
> >>>>> i checked, if this is reproducible. I've made a note of every
> >>>>> single step:
> >>>>>
> >>>>>
> >>>>> 1) login user 1 (moderator)
> >>>>> 2) user 1 entering private room
> >>>>> 3) user 1 turns camera and mic on
> >>>>> 4) login user 2 (not a moderator)
> >>>>> 5) user 2 is entering private room
> >>>>> 6) user 2 requests permissions to use camera and mic
> >>>>> 7) user 1 grants permissions to use camera and mic via activities and
> >>>>> actions
> >>>>> 8) user 2 turns on camera and mic
> >>>>> user 1 and user 2 see/hear each other
> >>>>> 9) user 1 leaves the room
> >>>>> user 2 sees "wait for moderator..." message
> >>>>> 10) user 1 re-enters the room
> >>>>> wait for moderator dissapears
> >>>>> user 1/user 2 cameras/mics off
> >>>>> 11) user 1 turns cam/mic back on
> >>>>> => user 2 sees user 1
> >>>>> 12) user 2 turns cam/mic back on
> >>>>> => user 1 does not see user 2 (question mark face ...)
> >>>>> => several mic symbols displayed on user 2 - browser for user
> >>>>> 2.....
> >>>>>
> >>>>> see attached pic ....
> >>>>>
> >>>>> user1
> >>>>>
> >>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
> >>>>>
> >>>>> user 2
> >>>>>
> >>>>> Firefox 79 (64 Bit)
> >>>>> Windows 10
> >>>>>
> >>>>> user 1 and user 2 both on the same network different machines
> >>>>>
> >>>>> server
> >>>>>
> >>>>> ubuntu 18.04 LTS
> >>>>>
> >>>>> openmeetings ...
> >>>>>
> >>>>> Version
> >>>>> 5.0.0
> >>>>> Revision
> >>>>> 422e22f
> >>>>> Build date
> >>>>> 2020-08-18T00:21:52Z
> >>>>>
> >>>>> Many thanks again,
> >>>>>
> >>>>> kaffeesurrogat
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
> >>>>>> @kaffeesurrogat,
> >>>>>>
> >>>>>> First of all can you confirm that you can see and hear at least 2
> >>>>>> users in a room as it is a little unclear... and if you’ve read
> >>>>>> my previous email.
> >>>>> yes there are two users in the room. the can hear an see each
> >>>>> other ....
> >>>>>
> >>>>>> I won’t be able to respond immediately as I am on the the other
> >>>>>> side of the planet and am heading off to bed... (1.38am)... but I
> >>>>>> am curious to see if you have been able to reproduce this
> >>>>>> scenario more than once... as it is not very clear from your posts.
> >>>>> yes .....
> >>>>>
> >>>>>> The situation you described might be exceptionally rare... as I
> >>>>>> can’t see the reason for a moderator to leave a room when others
> >>>>>> are in it... and as a result this scenario might be an
> >>>>>> oversight... but a very small one... taking meeting protocol into
> >>>>>> consideration. But I’ve recommended an alternative.
> >>>>>>
> >>>>>> Hope this helps somewhat.
> >>>>>>
> >>>>>> Again, it is important to stress that it would be useful to
> >>>>>> identify server specs, browser versions and so on.
> >>>>>>
> >>>>>> All the best, Denis.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Sent from my iPhone
> >>>>>>
> >>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
> >>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>>
> wrote:
> >>>>>>>
> >>>>>>> Dear Maxim, dear Alvaro, dear ....
> >>>>>>>
> >>>>>>> i did use a linux machine and a windows machine to test my setup
> >>>>>>> .....
> >>>>>>> I'm quite shure that I made a config mistake, but which one ?
> >>>>>>>
> >>>>>>> Many thanks for your testing and trying,
> >>>>>>>
> >>>>>>> kaffeesurrogat ....
> >>>>>>>
> >>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
> >>>>>>>> Hi,
> >>>>>>>>
> >>>>>>>> Are you using two different systems for two logins or just one
> >>>>>>>> system
> >>>>>>>> with two browser
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
> >>>>>>>> <solomax666@gmail.com <ma...@gmail.com>
> >>>>>>>> <ma...@gmail.com>> wrote:
> >>>>>>>>
> >>>>>>>> I'll try to test your steps
> >>>>>>>> will take some time ....
> >>>>>>>>
> >>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
> >>>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>
> >>>>>>>> <ma...@posteo.de>> wrote:
> >>>>>>>>
> >>>>>>>> Dear List,
> >>>>>>>>
> >>>>>>>> many thanks for your new release. I feel ashamed, that I have
> >>>>>>>> to ask
> >>>>>>>> again and again on this list.
> >>>>>>>>
> >>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
> >>>>>>>> followed the
> >>>>>>>> guides from the wiki.
> >>>>>>>>
> >>>>>>>> I can open up my camera and mic. The following is happening:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> 1) moderator enters the rom while nobody is there (chrome).
> >>>>>>>> 2) second user enters the room. Both enable there camera and
> >>>>>>>> mic. fine
> >>>>>>>> :-) (firefox)
> >>>>>>>> 3) The moderator leaves the room and the second users sees a
> >>>>>>>> message to
> >>>>>>>> be patient until the moderator enters the room again.
> >>>>>>>> 4) moderators reenters the room, both cameras are turned off
> >>>>>>>> 5) second users turns on his camera ....
> >>>>>>>>
> >>>>>>>> quite a few error messages show up, the camera window is
> >>>>>>>> blue and
> >>>>>>>> blank on the second users screen, on the moderator screens i
> >>>>>>>> can see only the questionmarkman ...
> >>>>>>>>
> >>>>>>>> I've attached all of my config files and some screenshots as
> >>>>>>>> png ...
> >>>>>>>>
> >>>>>>>> I did check the coturn server with trickle ... also attached
> >>>>>>>>
> >>>>>>>> I did attache a screen shot of the moderator account,
> >>>>>>>> several mic
> >>>>>>>> symbols on the screen
> >>>>>>>>
> >>>>>>>> The invalidStateError appears on the second users screen
> >>>>>>>>
> >>>>>>>> The RtcPeerConnection on the moderator screen .....
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> I'm lost .... already double checked my config files and
> >>>>>>>> reread the
> >>>>>>>> installation manuals ....
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> Many thanks,
> >>>>>>>>
> >>>>>>>> kaffeesurogat
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> --
> >>>>>>>> Best regards,
> >>>>>>>> Maxim
> >>>>>>>>
> >>
>
>
--
Best regards,
Maxim
Re: proplems with new release, room configs are different ...
Posted by kaffeesurrogat <ka...@posteo.de>.
On 26/08/2020 18:46, Denis Noctor wrote:
> If you take a look at this...
> https://openmeetings.apache.org/
>
> Near the bottom of the page you will notice one of the changes /
> improvements... “Direct link for entering the room with room name (not
> ID)”
>
> As a result... maybe... there are some field changes (additions) to
> the database.
you might be right ;-)
>
> You previously mentioned: 2 rooms, 2 different servers, 2 different
> versions of OM. I would keep everything the same... same version of OM.
sorry, that was some kind of missunderstanding. all my testing were done
with one server OM 5.0.0 (new release) on it
>
> I’ve tried to reproduce this on my set up... using one server, 2 users
> logged into the same room (one using updated version of Chrome and the
> other using updated Firefox), one install of OM on server and
> everything works fine.
> Sent from my iPhone
>
> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat <kaffeesurrogat@posteo.de
> <ma...@posteo.de>> wrote:
>
>>
>>
>> On 26/08/2020 18:16, Denis Noctor wrote:
>>> So let me get try to get my head around this... because I didn’t
>>> notice you mention this before...
>> that's right .... i just noticed it a few minutes ago .....
>>
>>
>>> Are you trying to set up a “clustering environment”.... using 2
>>> different versions of OM?
>>
>> no ... i have one machine to make changes and updates one for daily use
>> no clustering at all ;-)
>>
>>
>>
>>> Sent from my iPhone
>>
>>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat
>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>>>>
>>>> Me again,
>>>>
>>>> i made comparison between the my conference rooms.
>>>>
>>>> First conference room runs on server 1, older version of
>>>> openmeetings ...
>>>> Second conference room runs on server 2, new release of openmeetings
>>>> with several mic problem ....
>>>>
>>>> the room on server 2 does not have an Owner ID .... mmmmmm .....
>>>>
>>>>
>>>>
>>>>
>>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
>>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so
>>>>> many ;-)
>>>>>
>>>>> i checked, if this is reproducible. I've made a note of every
>>>>> single step:
>>>>>
>>>>>
>>>>> 1) login user 1 (moderator)
>>>>> 2) user 1 entering private room
>>>>> 3) user 1 turns camera and mic on
>>>>> 4) login user 2 (not a moderator)
>>>>> 5) user 2 is entering private room
>>>>> 6) user 2 requests permissions to use camera and mic
>>>>> 7) user 1 grants permissions to use camera and mic via activities and
>>>>> actions
>>>>> 8) user 2 turns on camera and mic
>>>>> user 1 and user 2 see/hear each other
>>>>> 9) user 1 leaves the room
>>>>> user 2 sees "wait for moderator..." message
>>>>> 10) user 1 re-enters the room
>>>>> wait for moderator dissapears
>>>>> user 1/user 2 cameras/mics off
>>>>> 11) user 1 turns cam/mic back on
>>>>> => user 2 sees user 1
>>>>> 12) user 2 turns cam/mic back on
>>>>> => user 1 does not see user 2 (question mark face ...)
>>>>> => several mic symbols displayed on user 2 - browser for user
>>>>> 2.....
>>>>>
>>>>> see attached pic ....
>>>>>
>>>>> user1
>>>>>
>>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
>>>>>
>>>>> user 2
>>>>>
>>>>> Firefox 79 (64 Bit)
>>>>> Windows 10
>>>>>
>>>>> user 1 and user 2 both on the same network different machines
>>>>>
>>>>> server
>>>>>
>>>>> ubuntu 18.04 LTS
>>>>>
>>>>> openmeetings ...
>>>>>
>>>>> Version
>>>>> 5.0.0
>>>>> Revision
>>>>> 422e22f
>>>>> Build date
>>>>> 2020-08-18T00:21:52Z
>>>>>
>>>>> Many thanks again,
>>>>>
>>>>> kaffeesurrogat
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
>>>>>> @kaffeesurrogat,
>>>>>>
>>>>>> First of all can you confirm that you can see and hear at least 2
>>>>>> users in a room as it is a little unclear... and if you’ve read
>>>>>> my previous email.
>>>>> yes there are two users in the room. the can hear an see each
>>>>> other ....
>>>>>
>>>>>> I won’t be able to respond immediately as I am on the the other
>>>>>> side of the planet and am heading off to bed... (1.38am)... but I
>>>>>> am curious to see if you have been able to reproduce this
>>>>>> scenario more than once... as it is not very clear from your posts.
>>>>> yes .....
>>>>>
>>>>>> The situation you described might be exceptionally rare... as I
>>>>>> can’t see the reason for a moderator to leave a room when others
>>>>>> are in it... and as a result this scenario might be an
>>>>>> oversight... but a very small one... taking meeting protocol into
>>>>>> consideration. But I’ve recommended an alternative.
>>>>>>
>>>>>> Hope this helps somewhat.
>>>>>>
>>>>>> Again, it is important to stress that it would be useful to
>>>>>> identify server specs, browser versions and so on.
>>>>>>
>>>>>> All the best, Denis.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Sent from my iPhone
>>>>>>
>>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat
>>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>>>>>>>
>>>>>>> Dear Maxim, dear Alvaro, dear ....
>>>>>>>
>>>>>>> i did use a linux machine and a windows machine to test my setup
>>>>>>> .....
>>>>>>> I'm quite shure that I made a config mistake, but which one ?
>>>>>>>
>>>>>>> Many thanks for your testing and trying,
>>>>>>>
>>>>>>> kaffeesurrogat ....
>>>>>>>
>>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> Are you using two different systems for two logins or just one
>>>>>>>> system
>>>>>>>> with two browser
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik
>>>>>>>> <solomax666@gmail.com <ma...@gmail.com>
>>>>>>>> <ma...@gmail.com>> wrote:
>>>>>>>>
>>>>>>>> I'll try to test your steps
>>>>>>>> will take some time ....
>>>>>>>>
>>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>>>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>
>>>>>>>> <ma...@posteo.de>> wrote:
>>>>>>>>
>>>>>>>> Dear List,
>>>>>>>>
>>>>>>>> many thanks for your new release. I feel ashamed, that I have
>>>>>>>> to ask
>>>>>>>> again and again on this list.
>>>>>>>>
>>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
>>>>>>>> followed the
>>>>>>>> guides from the wiki.
>>>>>>>>
>>>>>>>> I can open up my camera and mic. The following is happening:
>>>>>>>>
>>>>>>>>
>>>>>>>> 1) moderator enters the rom while nobody is there (chrome).
>>>>>>>> 2) second user enters the room. Both enable there camera and
>>>>>>>> mic. fine
>>>>>>>> :-) (firefox)
>>>>>>>> 3) The moderator leaves the room and the second users sees a
>>>>>>>> message to
>>>>>>>> be patient until the moderator enters the room again.
>>>>>>>> 4) moderators reenters the room, both cameras are turned off
>>>>>>>> 5) second users turns on his camera ....
>>>>>>>>
>>>>>>>> quite a few error messages show up, the camera window is
>>>>>>>> blue and
>>>>>>>> blank on the second users screen, on the moderator screens i
>>>>>>>> can see only the questionmarkman ...
>>>>>>>>
>>>>>>>> I've attached all of my config files and some screenshots as
>>>>>>>> png ...
>>>>>>>>
>>>>>>>> I did check the coturn server with trickle ... also attached
>>>>>>>>
>>>>>>>> I did attache a screen shot of the moderator account,
>>>>>>>> several mic
>>>>>>>> symbols on the screen
>>>>>>>>
>>>>>>>> The invalidStateError appears on the second users screen
>>>>>>>>
>>>>>>>> The RtcPeerConnection on the moderator screen .....
>>>>>>>>
>>>>>>>>
>>>>>>>> I'm lost .... already double checked my config files and
>>>>>>>> reread the
>>>>>>>> installation manuals ....
>>>>>>>>
>>>>>>>>
>>>>>>>> Many thanks,
>>>>>>>>
>>>>>>>> kaffeesurogat
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Best regards,
>>>>>>>> Maxim
>>>>>>>>
>>
Re: proplems with new release, room configs are different ...
Posted by Denis Noctor <de...@gmail.com>.
If you take a look at this...
https://openmeetings.apache.org/
Near the bottom of the page you will notice one of the changes / improvements... “Direct link for entering the room with room name (not ID)”
As a result... maybe... there are some field changes (additions) to the database.
You previously mentioned: 2 rooms, 2 different servers, 2 different versions of OM. I would keep everything the same... same version of OM.
I’ve tried to reproduce this on my set up... using one server, 2 users logged into the same room (one using updated version of Chrome and the other using updated Firefox), one install of OM on server and everything works fine.
Sent from my iPhone
> On Aug 26, 2020, at 11:24 AM, kaffeesurrogat <ka...@posteo.de> wrote:
>
>
>
>> On 26/08/2020 18:16, Denis Noctor wrote:
>> So let me get try to get my head around this... because I didn’t notice you mention this before...
> that's right .... i just noticed it a few minutes ago .....
>
>
>> Are you trying to set up a “clustering environment”.... using 2 different versions of OM?
>
> no ... i have one machine to make changes and updates one for daily use
> no clustering at all ;-)
>
>
>
>> Sent from my iPhone
>
>>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat <ka...@posteo.de> wrote:
>>>
>>> Me again,
>>>
>>> i made comparison between the my conference rooms.
>>>
>>> First conference room runs on server 1, older version of openmeetings ...
>>> Second conference room runs on server 2, new release of openmeetings
>>> with several mic problem ....
>>>
>>> the room on server 2 does not have an Owner ID .... mmmmmm .....
>>>
>>>
>>>
>>>
>>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
>>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so many ;-)
>>>>
>>>> i checked, if this is reproducible. I've made a note of every single step:
>>>>
>>>>
>>>> 1) login user 1 (moderator)
>>>> 2) user 1 entering private room
>>>> 3) user 1 turns camera and mic on
>>>> 4) login user 2 (not a moderator)
>>>> 5) user 2 is entering private room
>>>> 6) user 2 requests permissions to use camera and mic
>>>> 7) user 1 grants permissions to use camera and mic via activities and
>>>> actions
>>>> 8) user 2 turns on camera and mic
>>>> user 1 and user 2 see/hear each other
>>>> 9) user 1 leaves the room
>>>> user 2 sees "wait for moderator..." message
>>>> 10) user 1 re-enters the room
>>>> wait for moderator dissapears
>>>> user 1/user 2 cameras/mics off
>>>> 11) user 1 turns cam/mic back on
>>>> => user 2 sees user 1
>>>> 12) user 2 turns cam/mic back on
>>>> => user 1 does not see user 2 (question mark face ...)
>>>> => several mic symbols displayed on user 2 - browser for user 2.....
>>>>
>>>> see attached pic ....
>>>>
>>>> user1
>>>>
>>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
>>>>
>>>> user 2
>>>>
>>>> Firefox 79 (64 Bit)
>>>> Windows 10
>>>>
>>>> user 1 and user 2 both on the same network different machines
>>>>
>>>> server
>>>>
>>>> ubuntu 18.04 LTS
>>>>
>>>> openmeetings ...
>>>>
>>>> Version
>>>> 5.0.0
>>>> Revision
>>>> 422e22f
>>>> Build date
>>>> 2020-08-18T00:21:52Z
>>>>
>>>> Many thanks again,
>>>>
>>>> kaffeesurrogat
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>> On 26/08/2020 08:50, Denis Noctor wrote:
>>>>> @kaffeesurrogat,
>>>>>
>>>>> First of all can you confirm that you can see and hear at least 2 users in a room as it is a little unclear... and if you’ve read my previous email.
>>>> yes there are two users in the room. the can hear an see each other ....
>>>>
>>>>> I won’t be able to respond immediately as I am on the the other side of the planet and am heading off to bed... (1.38am)... but I am curious to see if you have been able to reproduce this scenario more than once... as it is not very clear from your posts.
>>>> yes .....
>>>>
>>>>> The situation you described might be exceptionally rare... as I can’t see the reason for a moderator to leave a room when others are in it... and as a result this scenario might be an oversight... but a very small one... taking meeting protocol into consideration. But I’ve recommended an alternative.
>>>>>
>>>>> Hope this helps somewhat.
>>>>>
>>>>> Again, it is important to stress that it would be useful to identify server specs, browser versions and so on.
>>>>>
>>>>> All the best, Denis.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat <ka...@posteo.de> wrote:
>>>>>>
>>>>>> Dear Maxim, dear Alvaro, dear ....
>>>>>>
>>>>>> i did use a linux machine and a windows machine to test my setup .....
>>>>>> I'm quite shure that I made a config mistake, but which one ?
>>>>>>
>>>>>> Many thanks for your testing and trying,
>>>>>>
>>>>>> kaffeesurrogat ....
>>>>>>
>>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> Are you using two different systems for two logins or just one system
>>>>>>> with two browser
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik <solomax666@gmail.com
>>>>>>> <ma...@gmail.com>> wrote:
>>>>>>>
>>>>>>> I'll try to test your steps
>>>>>>> will take some time ....
>>>>>>>
>>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>>>>>>>
>>>>>>> Dear List,
>>>>>>>
>>>>>>> many thanks for your new release. I feel ashamed, that I have
>>>>>>> to ask
>>>>>>> again and again on this list.
>>>>>>>
>>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
>>>>>>> followed the
>>>>>>> guides from the wiki.
>>>>>>>
>>>>>>> I can open up my camera and mic. The following is happening:
>>>>>>>
>>>>>>>
>>>>>>> 1) moderator enters the rom while nobody is there (chrome).
>>>>>>> 2) second user enters the room. Both enable there camera and
>>>>>>> mic. fine
>>>>>>> :-) (firefox)
>>>>>>> 3) The moderator leaves the room and the second users sees a
>>>>>>> message to
>>>>>>> be patient until the moderator enters the room again.
>>>>>>> 4) moderators reenters the room, both cameras are turned off
>>>>>>> 5) second users turns on his camera ....
>>>>>>>
>>>>>>> quite a few error messages show up, the camera window is
>>>>>>> blue and
>>>>>>> blank on the second users screen, on the moderator screens i
>>>>>>> can see only the questionmarkman ...
>>>>>>>
>>>>>>> I've attached all of my config files and some screenshots as
>>>>>>> png ...
>>>>>>>
>>>>>>> I did check the coturn server with trickle ... also attached
>>>>>>>
>>>>>>> I did attache a screen shot of the moderator account, several mic
>>>>>>> symbols on the screen
>>>>>>>
>>>>>>> The invalidStateError appears on the second users screen
>>>>>>>
>>>>>>> The RtcPeerConnection on the moderator screen .....
>>>>>>>
>>>>>>>
>>>>>>> I'm lost .... already double checked my config files and
>>>>>>> reread the
>>>>>>> installation manuals ....
>>>>>>>
>>>>>>>
>>>>>>> Many thanks,
>>>>>>>
>>>>>>> kaffeesurogat
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Best regards,
>>>>>>> Maxim
>>>>>>>
>
Re: proplems with new release, room configs are different ...
Posted by kaffeesurrogat <ka...@posteo.de>.
On 26/08/2020 18:16, Denis Noctor wrote:
> So let me get try to get my head around this... because I didn’t notice you mention this before...
that's right .... i just noticed it a few minutes ago .....
> Are you trying to set up a “clustering environment”.... using 2 different versions of OM?
no ... i have one machine to make changes and updates one for daily use
no clustering at all ;-)
> Sent from my iPhone
>> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat <ka...@posteo.de> wrote:
>>
>> Me again,
>>
>> i made comparison between the my conference rooms.
>>
>> First conference room runs on server 1, older version of openmeetings ...
>> Second conference room runs on server 2, new release of openmeetings
>> with several mic problem ....
>>
>> the room on server 2 does not have an Owner ID .... mmmmmm .....
>>
>>
>>
>>
>>> On 26/08/2020 17:46, kaffeesurrogat wrote:
>>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so many ;-)
>>>
>>> i checked, if this is reproducible. I've made a note of every single step:
>>>
>>>
>>> 1) login user 1 (moderator)
>>> 2) user 1 entering private room
>>> 3) user 1 turns camera and mic on
>>> 4) login user 2 (not a moderator)
>>> 5) user 2 is entering private room
>>> 6) user 2 requests permissions to use camera and mic
>>> 7) user 1 grants permissions to use camera and mic via activities and
>>> actions
>>> 8) user 2 turns on camera and mic
>>> user 1 and user 2 see/hear each other
>>> 9) user 1 leaves the room
>>> user 2 sees "wait for moderator..." message
>>> 10) user 1 re-enters the room
>>> wait for moderator dissapears
>>> user 1/user 2 cameras/mics off
>>> 11) user 1 turns cam/mic back on
>>> => user 2 sees user 1
>>> 12) user 2 turns cam/mic back on
>>> => user 1 does not see user 2 (question mark face ...)
>>> => several mic symbols displayed on user 2 - browser for user 2.....
>>>
>>> see attached pic ....
>>>
>>> user1
>>>
>>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
>>>
>>> user 2
>>>
>>> Firefox 79 (64 Bit)
>>> Windows 10
>>>
>>> user 1 and user 2 both on the same network different machines
>>>
>>> server
>>>
>>> ubuntu 18.04 LTS
>>>
>>> openmeetings ...
>>>
>>> Version
>>> 5.0.0
>>> Revision
>>> 422e22f
>>> Build date
>>> 2020-08-18T00:21:52Z
>>>
>>> Many thanks again,
>>>
>>> kaffeesurrogat
>>>
>>>
>>>
>>>
>>>
>>>> On 26/08/2020 08:50, Denis Noctor wrote:
>>>> @kaffeesurrogat,
>>>>
>>>> First of all can you confirm that you can see and hear at least 2 users in a room as it is a little unclear... and if you’ve read my previous email.
>>> yes there are two users in the room. the can hear an see each other ....
>>>
>>>> I won’t be able to respond immediately as I am on the the other side of the planet and am heading off to bed... (1.38am)... but I am curious to see if you have been able to reproduce this scenario more than once... as it is not very clear from your posts.
>>> yes .....
>>>
>>>> The situation you described might be exceptionally rare... as I can’t see the reason for a moderator to leave a room when others are in it... and as a result this scenario might be an oversight... but a very small one... taking meeting protocol into consideration. But I’ve recommended an alternative.
>>>>
>>>> Hope this helps somewhat.
>>>>
>>>> Again, it is important to stress that it would be useful to identify server specs, browser versions and so on.
>>>>
>>>> All the best, Denis.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat <ka...@posteo.de> wrote:
>>>>>
>>>>> Dear Maxim, dear Alvaro, dear ....
>>>>>
>>>>> i did use a linux machine and a windows machine to test my setup .....
>>>>> I'm quite shure that I made a config mistake, but which one ?
>>>>>
>>>>> Many thanks for your testing and trying,
>>>>>
>>>>> kaffeesurrogat ....
>>>>>
>>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>>>>>> Hi,
>>>>>>
>>>>>> Are you using two different systems for two logins or just one system
>>>>>> with two browser
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik <solomax666@gmail.com
>>>>>> <ma...@gmail.com>> wrote:
>>>>>>
>>>>>> I'll try to test your steps
>>>>>> will take some time ....
>>>>>>
>>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>>>>>>
>>>>>> Dear List,
>>>>>>
>>>>>> many thanks for your new release. I feel ashamed, that I have
>>>>>> to ask
>>>>>> again and again on this list.
>>>>>>
>>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
>>>>>> followed the
>>>>>> guides from the wiki.
>>>>>>
>>>>>> I can open up my camera and mic. The following is happening:
>>>>>>
>>>>>>
>>>>>> 1) moderator enters the rom while nobody is there (chrome).
>>>>>> 2) second user enters the room. Both enable there camera and
>>>>>> mic. fine
>>>>>> :-) (firefox)
>>>>>> 3) The moderator leaves the room and the second users sees a
>>>>>> message to
>>>>>> be patient until the moderator enters the room again.
>>>>>> 4) moderators reenters the room, both cameras are turned off
>>>>>> 5) second users turns on his camera ....
>>>>>>
>>>>>> quite a few error messages show up, the camera window is
>>>>>> blue and
>>>>>> blank on the second users screen, on the moderator screens i
>>>>>> can see only the questionmarkman ...
>>>>>>
>>>>>> I've attached all of my config files and some screenshots as
>>>>>> png ...
>>>>>>
>>>>>> I did check the coturn server with trickle ... also attached
>>>>>>
>>>>>> I did attache a screen shot of the moderator account, several mic
>>>>>> symbols on the screen
>>>>>>
>>>>>> The invalidStateError appears on the second users screen
>>>>>>
>>>>>> The RtcPeerConnection on the moderator screen .....
>>>>>>
>>>>>>
>>>>>> I'm lost .... already double checked my config files and
>>>>>> reread the
>>>>>> installation manuals ....
>>>>>>
>>>>>>
>>>>>> Many thanks,
>>>>>>
>>>>>> kaffeesurogat
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Best regards,
>>>>>> Maxim
>>>>>>
Re: proplems with new release, room configs are different ...
Posted by Denis Noctor <de...@gmail.com>.
So let me get try to get my head around this... because I didn’t notice you mention this before... Are you trying to set up a “clustering environment”.... using 2 different versions of OM?
Sent from my iPhone
> On Aug 26, 2020, at 10:59 AM, kaffeesurrogat <ka...@posteo.de> wrote:
>
> Me again,
>
> i made comparison between the my conference rooms.
>
> First conference room runs on server 1, older version of openmeetings ...
> Second conference room runs on server 2, new release of openmeetings
> with several mic problem ....
>
> the room on server 2 does not have an Owner ID .... mmmmmm .....
>
>
>
>
>> On 26/08/2020 17:46, kaffeesurrogat wrote:
>> Deear Denis, dear Maxim, dear Alvaro, dear ... oh there are so many ;-)
>>
>> i checked, if this is reproducible. I've made a note of every single step:
>>
>>
>> 1) login user 1 (moderator)
>> 2) user 1 entering private room
>> 3) user 1 turns camera and mic on
>> 4) login user 2 (not a moderator)
>> 5) user 2 is entering private room
>> 6) user 2 requests permissions to use camera and mic
>> 7) user 1 grants permissions to use camera and mic via activities and
>> actions
>> 8) user 2 turns on camera and mic
>> user 1 and user 2 see/hear each other
>> 9) user 1 leaves the room
>> user 2 sees "wait for moderator..." message
>> 10) user 1 re-enters the room
>> wait for moderator dissapears
>> user 1/user 2 cameras/mics off
>> 11) user 1 turns cam/mic back on
>> => user 2 sees user 1
>> 12) user 2 turns cam/mic back on
>> => user 1 does not see user 2 (question mark face ...)
>> => several mic symbols displayed on user 2 - browser for user 2.....
>>
>> see attached pic ....
>>
>> user1
>>
>> chrome 84.0.04147.135 (Official Build) 64 Bit gentoo linux machine
>>
>> user 2
>>
>> Firefox 79 (64 Bit)
>> Windows 10
>>
>> user 1 and user 2 both on the same network different machines
>>
>> server
>>
>> ubuntu 18.04 LTS
>>
>> openmeetings ...
>>
>> Version
>> 5.0.0
>> Revision
>> 422e22f
>> Build date
>> 2020-08-18T00:21:52Z
>>
>> Many thanks again,
>>
>> kaffeesurrogat
>>
>>
>>
>>
>>
>>> On 26/08/2020 08:50, Denis Noctor wrote:
>>> @kaffeesurrogat,
>>>
>>> First of all can you confirm that you can see and hear at least 2 users in a room as it is a little unclear... and if you’ve read my previous email.
>> yes there are two users in the room. the can hear an see each other ....
>>
>>> I won’t be able to respond immediately as I am on the the other side of the planet and am heading off to bed... (1.38am)... but I am curious to see if you have been able to reproduce this scenario more than once... as it is not very clear from your posts.
>> yes .....
>>
>>> The situation you described might be exceptionally rare... as I can’t see the reason for a moderator to leave a room when others are in it... and as a result this scenario might be an oversight... but a very small one... taking meeting protocol into consideration. But I’ve recommended an alternative.
>>>
>>> Hope this helps somewhat.
>>>
>>> Again, it is important to stress that it would be useful to identify server specs, browser versions and so on.
>>>
>>> All the best, Denis.
>>>
>>>
>>>
>>>
>>>
>>> Sent from my iPhone
>>>
>>>> On Aug 26, 2020, at 1:09 AM, kaffeesurrogat <ka...@posteo.de> wrote:
>>>>
>>>> Dear Maxim, dear Alvaro, dear ....
>>>>
>>>> i did use a linux machine and a windows machine to test my setup .....
>>>> I'm quite shure that I made a config mistake, but which one ?
>>>>
>>>> Many thanks for your testing and trying,
>>>>
>>>> kaffeesurrogat ....
>>>>
>>>>> On 25/08/2020 19:07, Ajay Simha wrote:
>>>>> Hi,
>>>>>
>>>>> Are you using two different systems for two logins or just one system
>>>>> with two browser
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Aug 25, 2020, 18:29 Maxim Solodovnik <solomax666@gmail.com
>>>>> <ma...@gmail.com>> wrote:
>>>>>
>>>>> I'll try to test your steps
>>>>> will take some time ....
>>>>>
>>>>> On Tue, 25 Aug 2020 at 01:38, kaffeesurrogat
>>>>> <kaffeesurrogat@posteo.de <ma...@posteo.de>> wrote:
>>>>>
>>>>> Dear List,
>>>>>
>>>>> many thanks for your new release. I feel ashamed, that I have
>>>>> to ask
>>>>> again and again on this list.
>>>>>
>>>>> I've installed OM-5.0.0 on an Ubuntu 18.04 LTS and I've
>>>>> followed the
>>>>> guides from the wiki.
>>>>>
>>>>> I can open up my camera and mic. The following is happening:
>>>>>
>>>>>
>>>>> 1) moderator enters the rom while nobody is there (chrome).
>>>>> 2) second user enters the room. Both enable there camera and
>>>>> mic. fine
>>>>> :-) (firefox)
>>>>> 3) The moderator leaves the room and the second users sees a
>>>>> message to
>>>>> be patient until the moderator enters the room again.
>>>>> 4) moderators reenters the room, both cameras are turned off
>>>>> 5) second users turns on his camera ....
>>>>>
>>>>> quite a few error messages show up, the camera window is
>>>>> blue and
>>>>> blank on the second users screen, on the moderator screens i
>>>>> can see only the questionmarkman ...
>>>>>
>>>>> I've attached all of my config files and some screenshots as
>>>>> png ...
>>>>>
>>>>> I did check the coturn server with trickle ... also attached
>>>>>
>>>>> I did attache a screen shot of the moderator account, several mic
>>>>> symbols on the screen
>>>>>
>>>>> The invalidStateError appears on the second users screen
>>>>>
>>>>> The RtcPeerConnection on the moderator screen .....
>>>>>
>>>>>
>>>>> I'm lost .... already double checked my config files and
>>>>> reread the
>>>>> installation manuals ....
>>>>>
>>>>>
>>>>> Many thanks,
>>>>>
>>>>> kaffeesurogat
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Best regards,
>>>>> Maxim
>>>>>
>