You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@jena.apache.org by Jean-Claude Moissinac <je...@telecom-paristech.fr> on 2019/11/21 13:59:58 UTC

Access control on Jena/fuseki datasets

Hello

I would like to give free access to some datasets in my fuseki server and
control access to other datasets.
With shiro, I'm able to control the sparql access points like
https://myserver/dm/sparql
but I'm not able to give a controlled access to the datasets user interface
https://myserver/dataset.html?tab=query&ds=/controlleddataset
or
https://myserver/dataset.html?tab=query&ds=/freedataset
or
https://myserver/

Is there some good practices about the access control in fuseki instances?

Thank's in advance for any advice
--
Jean-Claude Moissinac

Re: Access control on Jena/fuseki datasets

Posted by Jean-Claude Moissinac <je...@telecom-paristech.fr>.
Dear Andy,

Thank's for your reply.
But, as said in my starting email, my problem is to control the access of
the datasets in the user interface? Because, I need the user interface.
A tuned configuration for Shiro does the job for the sparql endpoints
A way could be to produce a specific user interface for access to the free
datasets. I need to check for the feasibility.

--
Jean-Claude Moissinac



Le jeu. 21 nov. 2019 à 18:32, Andy Seaborne <an...@apache.org> a écrit :

> A different approach is to use:
>
> https://jena.apache.org/documentation/fuseki2/data-access-control
>
> This goes with fuseki-main rather than fuseki-full.
>
> That works particularly well when you don't want the UI.
>
>      Andy
>
>
> On 21/11/2019 13:59, Jean-Claude Moissinac wrote:
> > Hello
> >
> > I would like to give free access to some datasets in my fuseki server and
> > control access to other datasets.
> > With shiro, I'm able to control the sparql access points like
> > https://myserver/dm/sparql
> > but I'm not able to give a controlled access to the datasets user
> interface
> > https://myserver/dataset.html?tab=query&ds=/controlleddataset
> > or
> > https://myserver/dataset.html?tab=query&ds=/freedataset
> > or
> > https://myserver/
> >
> > Is there some good practices about the access control in fuseki
> instances?
> >
> > Thank's in advance for any advice
> > --
> > Jean-Claude Moissinac
> >
>

Re: Access control on Jena/fuseki datasets

Posted by Andy Seaborne <an...@apache.org>.
A different approach is to use:

https://jena.apache.org/documentation/fuseki2/data-access-control

This goes with fuseki-main rather than fuseki-full.

That works particularly well when you don't want the UI.

     Andy


On 21/11/2019 13:59, Jean-Claude Moissinac wrote:
> Hello
> 
> I would like to give free access to some datasets in my fuseki server and
> control access to other datasets.
> With shiro, I'm able to control the sparql access points like
> https://myserver/dm/sparql
> but I'm not able to give a controlled access to the datasets user interface
> https://myserver/dataset.html?tab=query&ds=/controlleddataset
> or
> https://myserver/dataset.html?tab=query&ds=/freedataset
> or
> https://myserver/
> 
> Is there some good practices about the access control in fuseki instances?
> 
> Thank's in advance for any advice
> --
> Jean-Claude Moissinac
> 

Re: Access control on Jena/fuseki datasets

Posted by ajs6f <aj...@apache.org>.
I think that the issue is that Shiro, out of the box, does not address matching by query param. You may wish to configure RegExPatternMatcher, which would be more flexible.

https://shiro.apache.org/static/1.4.2/apidocs/org/apache/shiro/util/RegExPatternMatcher.html

ajs6f

> On Nov 22, 2019, at 12:43 PM, Jean-Claude Moissinac <je...@telecom-paristech.fr> wrote:
> 
> @ajs6f I doesnt think that shiro is the problem (perhaps, it is part of the
> solution). I think that the web UI of Fuseki call something which is
> protected. But what?
> The index.html page doesn't contain an evident candidate.
> I think that we have to look in js/app/main.index.js, but it becomes an
> indeep analyze of complex js code...
> --
> Jean-Claude Moissinac
> 
> 
> 
> Le ven. 22 nov. 2019 à 17:49, ajs6f <aj...@apache.org> a écrit :
> 
>> This isn't really a question about Jena, it's a question about Shiro. Have
>> you tried asking that community?
>> 
>> ajs6f
>> 
>>> On Nov 22, 2019, at 11:41 AM, Jean-Claude Moissinac <
>> jean-claude.moissinac@telecom-paristech.fr> wrote:
>>> 
>>> Dear Marco,
>>> 
>>> I think my previous reading of this documentation was right.
>>> My understanding is that the proposed solution is to develop specific
>> Java
>>> code (like the ShiroExampleEvaluator) to implement  the permissions.
>>> I would like just to configure and use fuseki, not start a Java
>> development
>>> I doesn't see clearly , by doing such code,
>>> * if i get something more efficient than what I do with shiro, following
>>> the documentation here
>>> https://jena.apache.org/documentation/fuseki2/fuseki-security.html
>>> 
>>> * if I will be able to manage correctly the user interface while having
>>> some free datasets and some  protected dataset
>>> now, a window to enter a login/pwd is always displayed when I call the
>> user
>>> interface, so I'm not able to give a free access to free datasets
>>> through the user interface
>>> In the section [urls] of shiro.ini, I have the following line to access
>> the
>>> user interface
>>> / = anon
>>> 
>>> 
>>> 
>>> 
>>> --
>>> Jean-Claude Moissinac
>>> 
>>> 
>>> 
>>> Le jeu. 21 nov. 2019 à 16:05, Marco Neumann <ma...@gmail.com> a
>>> écrit :
>>> 
>>>> please take a look at
>>>> 
>>>> https://jena.apache.org/documentation/permissions/index.html
>>>> 
>>>> 
>>>> On Thu 21. Nov 2019 at 14:00, Jean-Claude Moissinac <
>>>> jean-claude.moissinac@telecom-paristech.fr> wrote:
>>>> 
>>>>> Hello
>>>>> 
>>>>> I would like to give free access to some datasets in my fuseki server
>> and
>>>>> control access to other datasets.
>>>>> With shiro, I'm able to control the sparql access points like
>>>>> https://myserver/dm/sparql
>>>>> but I'm not able to give a controlled access to the datasets user
>>>> interface
>>>>> https://myserver/dataset.html?tab=query&ds=/controlleddataset
>>>>> or
>>>>> https://myserver/dataset.html?tab=query&ds=/freedataset
>>>>> or
>>>>> https://myserver/
>>>>> 
>>>>> Is there some good practices about the access control in fuseki
>>>> instances?
>>>>> 
>>>>> Thank's in advance for any advice
>>>>> --
>>>>> Jean-Claude Moissinac
>>>>> 
>>>> --
>>>> 
>>>> 
>>>> ---
>>>> Marco Neumann
>>>> KONA
>>>> 
>> 
>> 


Re: Access control on Jena/fuseki datasets

Posted by Jean-Claude Moissinac <je...@telecom-paristech.fr>.
@ajs6f I doesnt think that shiro is the problem (perhaps, it is part of the
solution). I think that the web UI of Fuseki call something which is
protected. But what?
The index.html page doesn't contain an evident candidate.
I think that we have to look in js/app/main.index.js, but it becomes an
indeep analyze of complex js code...
--
Jean-Claude Moissinac



Le ven. 22 nov. 2019 à 17:49, ajs6f <aj...@apache.org> a écrit :

> This isn't really a question about Jena, it's a question about Shiro. Have
> you tried asking that community?
>
> ajs6f
>
> > On Nov 22, 2019, at 11:41 AM, Jean-Claude Moissinac <
> jean-claude.moissinac@telecom-paristech.fr> wrote:
> >
> > Dear Marco,
> >
> > I think my previous reading of this documentation was right.
> > My understanding is that the proposed solution is to develop specific
> Java
> > code (like the ShiroExampleEvaluator) to implement  the permissions.
> > I would like just to configure and use fuseki, not start a Java
> development
> > I doesn't see clearly , by doing such code,
> > * if i get something more efficient than what I do with shiro, following
> > the documentation here
> > https://jena.apache.org/documentation/fuseki2/fuseki-security.html
> >
> > * if I will be able to manage correctly the user interface while having
> > some free datasets and some  protected dataset
> > now, a window to enter a login/pwd is always displayed when I call the
> user
> > interface, so I'm not able to give a free access to free datasets
> > through the user interface
> > In the section [urls] of shiro.ini, I have the following line to access
> the
> > user interface
> > / = anon
> >
> >
> >
> >
> > --
> > Jean-Claude Moissinac
> >
> >
> >
> > Le jeu. 21 nov. 2019 à 16:05, Marco Neumann <ma...@gmail.com> a
> > écrit :
> >
> >> please take a look at
> >>
> >> https://jena.apache.org/documentation/permissions/index.html
> >>
> >>
> >> On Thu 21. Nov 2019 at 14:00, Jean-Claude Moissinac <
> >> jean-claude.moissinac@telecom-paristech.fr> wrote:
> >>
> >>> Hello
> >>>
> >>> I would like to give free access to some datasets in my fuseki server
> and
> >>> control access to other datasets.
> >>> With shiro, I'm able to control the sparql access points like
> >>> https://myserver/dm/sparql
> >>> but I'm not able to give a controlled access to the datasets user
> >> interface
> >>> https://myserver/dataset.html?tab=query&ds=/controlleddataset
> >>> or
> >>> https://myserver/dataset.html?tab=query&ds=/freedataset
> >>> or
> >>> https://myserver/
> >>>
> >>> Is there some good practices about the access control in fuseki
> >> instances?
> >>>
> >>> Thank's in advance for any advice
> >>> --
> >>> Jean-Claude Moissinac
> >>>
> >> --
> >>
> >>
> >> ---
> >> Marco Neumann
> >> KONA
> >>
>
>

Re: Access control on Jena/fuseki datasets

Posted by ajs6f <aj...@apache.org>.
This isn't really a question about Jena, it's a question about Shiro. Have you tried asking that community?

ajs6f

> On Nov 22, 2019, at 11:41 AM, Jean-Claude Moissinac <je...@telecom-paristech.fr> wrote:
> 
> Dear Marco,
> 
> I think my previous reading of this documentation was right.
> My understanding is that the proposed solution is to develop specific Java
> code (like the ShiroExampleEvaluator) to implement  the permissions.
> I would like just to configure and use fuseki, not start a Java development
> I doesn't see clearly , by doing such code,
> * if i get something more efficient than what I do with shiro, following
> the documentation here
> https://jena.apache.org/documentation/fuseki2/fuseki-security.html
> 
> * if I will be able to manage correctly the user interface while having
> some free datasets and some  protected dataset
> now, a window to enter a login/pwd is always displayed when I call the user
> interface, so I'm not able to give a free access to free datasets
> through the user interface
> In the section [urls] of shiro.ini, I have the following line to access the
> user interface
> / = anon
> 
> 
> 
> 
> --
> Jean-Claude Moissinac
> 
> 
> 
> Le jeu. 21 nov. 2019 à 16:05, Marco Neumann <ma...@gmail.com> a
> écrit :
> 
>> please take a look at
>> 
>> https://jena.apache.org/documentation/permissions/index.html
>> 
>> 
>> On Thu 21. Nov 2019 at 14:00, Jean-Claude Moissinac <
>> jean-claude.moissinac@telecom-paristech.fr> wrote:
>> 
>>> Hello
>>> 
>>> I would like to give free access to some datasets in my fuseki server and
>>> control access to other datasets.
>>> With shiro, I'm able to control the sparql access points like
>>> https://myserver/dm/sparql
>>> but I'm not able to give a controlled access to the datasets user
>> interface
>>> https://myserver/dataset.html?tab=query&ds=/controlleddataset
>>> or
>>> https://myserver/dataset.html?tab=query&ds=/freedataset
>>> or
>>> https://myserver/
>>> 
>>> Is there some good practices about the access control in fuseki
>> instances?
>>> 
>>> Thank's in advance for any advice
>>> --
>>> Jean-Claude Moissinac
>>> 
>> --
>> 
>> 
>> ---
>> Marco Neumann
>> KONA
>> 


Re: Access control on Jena/fuseki datasets

Posted by Jean-Claude Moissinac <je...@telecom-paristech.fr>.
Many thank's Andy.
I missed the page
https://jena.apache.org/documentation/fuseki2/data-access-control#graph-acl
I will explore the possibilities offered by a graph by graph   control.

For my original problem, I found a solution by avoiding the standard UI of
fuseki.
I installed Yasgui as UI and then, datasets freely accessible are
accessible in the Yasgui UI while they aren't in the standard Fuseki UI.

--
Jean-Claude Moissinac



Le dim. 24 nov. 2019 à 18:11, Andy Seaborne <an...@apache.org> a écrit :

>
>
> On 24/11/2019 11:51, Claude Warren wrote:
> > If you want to restrict access to datasets alone you can probably do that
> > in Fuseki.  If you want to grant access to specific models within a
> dataset
> > you will probably need to use the Permissions layer.
> > The permissions layer will allow you to restrict access to graphs or even
> > down to the triple level.
>
> Fuseki has per-graph-access control:
>
> https://jena.apache.org/documentation/fuseki2/data-access-control#graph-acl
>
> If it is TBD1 or TDB2, it's done by filtering the data as it's read out
> of the indexes.
>
> Otherwise it's a rewritten dataset with only the accessible graphs.
>
> DefaultUnionGraph works.
>
> The only policy modes are "read" or "write", combined with the ACL
> description in Fuskei configuration file.
>
> After that, for parts of a graph (triple level, e.g. by predicate), or
> for policies other than "read" or "write" based on ACLs, you do need the
> permissions layer.
>
>      Andy
>
> >
> > Restricting access to models in a dataset using Shiro would be a fairly
> > straight forward extension of the ShiroExampleEvaluator to map users to
> the
> > models they can see.
> >
> > Claude
> >
> > On Fri, Nov 22, 2019 at 4:41 PM Jean-Claude Moissinac <
> > jean-claude.moissinac@telecom-paristech.fr> wrote:
> >
> >> Dear Marco,
> >>
> >> I think my previous reading of this documentation was right.
> >> My understanding is that the proposed solution is to develop specific
> Java
> >> code (like the ShiroExampleEvaluator) to implement  the permissions.
> >> I would like just to configure and use fuseki, not start a Java
> development
> >> I doesn't see clearly , by doing such code,
> >> * if i get something more efficient than what I do with shiro, following
> >> the documentation here
> >> https://jena.apache.org/documentation/fuseki2/fuseki-security.html
> >>
> >> * if I will be able to manage correctly the user interface while having
> >> some free datasets and some  protected dataset
> >> now, a window to enter a login/pwd is always displayed when I call the
> user
> >> interface, so I'm not able to give a free access to free datasets
> >> through the user interface
> >> In the section [urls] of shiro.ini, I have the following line to access
> the
> >> user interface
> >> / = anon
> >>
> >>
> >>
> >>
> >> --
> >> Jean-Claude Moissinac
> >>
> >>
> >>
> >> Le jeu. 21 nov. 2019 à 16:05, Marco Neumann <ma...@gmail.com> a
> >> écrit :
> >>
> >>> please take a look at
> >>>
> >>> https://jena.apache.org/documentation/permissions/index.html
> >>>
> >>>
> >>> On Thu 21. Nov 2019 at 14:00, Jean-Claude Moissinac <
> >>> jean-claude.moissinac@telecom-paristech.fr> wrote:
> >>>
> >>>> Hello
> >>>>
> >>>> I would like to give free access to some datasets in my fuseki server
> >> and
> >>>> control access to other datasets.
> >>>> With shiro, I'm able to control the sparql access points like
> >>>> https://myserver/dm/sparql
> >>>> but I'm not able to give a controlled access to the datasets user
> >>> interface
> >>>> https://myserver/dataset.html?tab=query&ds=/controlleddataset
> >>>> or
> >>>> https://myserver/dataset.html?tab=query&ds=/freedataset
> >>>> or
> >>>> https://myserver/
> >>>>
> >>>> Is there some good practices about the access control in fuseki
> >>> instances?
> >>>>
> >>>> Thank's in advance for any advice
> >>>> --
> >>>> Jean-Claude Moissinac
> >>>>
> >>> --
> >>>
> >>>
> >>> ---
> >>> Marco Neumann
> >>> KONA
> >>>
> >>
> >
> >
>

Re: Access control on Jena/fuseki datasets

Posted by Andy Seaborne <an...@apache.org>.

On 24/11/2019 11:51, Claude Warren wrote:
> If you want to restrict access to datasets alone you can probably do that
> in Fuseki.  If you want to grant access to specific models within a dataset
> you will probably need to use the Permissions layer.
> The permissions layer will allow you to restrict access to graphs or even
> down to the triple level.

Fuseki has per-graph-access control:

https://jena.apache.org/documentation/fuseki2/data-access-control#graph-acl

If it is TBD1 or TDB2, it's done by filtering the data as it's read out 
of the indexes.

Otherwise it's a rewritten dataset with only the accessible graphs.

DefaultUnionGraph works.

The only policy modes are "read" or "write", combined with the ACL 
description in Fuskei configuration file.

After that, for parts of a graph (triple level, e.g. by predicate), or 
for policies other than "read" or "write" based on ACLs, you do need the 
permissions layer.

     Andy

> 
> Restricting access to models in a dataset using Shiro would be a fairly
> straight forward extension of the ShiroExampleEvaluator to map users to the
> models they can see.
> 
> Claude
> 
> On Fri, Nov 22, 2019 at 4:41 PM Jean-Claude Moissinac <
> jean-claude.moissinac@telecom-paristech.fr> wrote:
> 
>> Dear Marco,
>>
>> I think my previous reading of this documentation was right.
>> My understanding is that the proposed solution is to develop specific Java
>> code (like the ShiroExampleEvaluator) to implement  the permissions.
>> I would like just to configure and use fuseki, not start a Java development
>> I doesn't see clearly , by doing such code,
>> * if i get something more efficient than what I do with shiro, following
>> the documentation here
>> https://jena.apache.org/documentation/fuseki2/fuseki-security.html
>>
>> * if I will be able to manage correctly the user interface while having
>> some free datasets and some  protected dataset
>> now, a window to enter a login/pwd is always displayed when I call the user
>> interface, so I'm not able to give a free access to free datasets
>> through the user interface
>> In the section [urls] of shiro.ini, I have the following line to access the
>> user interface
>> / = anon
>>
>>
>>
>>
>> --
>> Jean-Claude Moissinac
>>
>>
>>
>> Le jeu. 21 nov. 2019 à 16:05, Marco Neumann <ma...@gmail.com> a
>> écrit :
>>
>>> please take a look at
>>>
>>> https://jena.apache.org/documentation/permissions/index.html
>>>
>>>
>>> On Thu 21. Nov 2019 at 14:00, Jean-Claude Moissinac <
>>> jean-claude.moissinac@telecom-paristech.fr> wrote:
>>>
>>>> Hello
>>>>
>>>> I would like to give free access to some datasets in my fuseki server
>> and
>>>> control access to other datasets.
>>>> With shiro, I'm able to control the sparql access points like
>>>> https://myserver/dm/sparql
>>>> but I'm not able to give a controlled access to the datasets user
>>> interface
>>>> https://myserver/dataset.html?tab=query&ds=/controlleddataset
>>>> or
>>>> https://myserver/dataset.html?tab=query&ds=/freedataset
>>>> or
>>>> https://myserver/
>>>>
>>>> Is there some good practices about the access control in fuseki
>>> instances?
>>>>
>>>> Thank's in advance for any advice
>>>> --
>>>> Jean-Claude Moissinac
>>>>
>>> --
>>>
>>>
>>> ---
>>> Marco Neumann
>>> KONA
>>>
>>
> 
> 

Re: Access control on Jena/fuseki datasets

Posted by Claude Warren <cl...@xenei.com>.
If you want to restrict access to datasets alone you can probably do that
in Fuseki.  If you want to grant access to specific models within a dataset
you will probably need to use the Permissions layer.
The permissions layer will allow you to restrict access to graphs or even
down to the triple level.

Restricting access to models in a dataset using Shiro would be a fairly
straight forward extension of the ShiroExampleEvaluator to map users to the
models they can see.

Claude

On Fri, Nov 22, 2019 at 4:41 PM Jean-Claude Moissinac <
jean-claude.moissinac@telecom-paristech.fr> wrote:

> Dear Marco,
>
> I think my previous reading of this documentation was right.
> My understanding is that the proposed solution is to develop specific Java
> code (like the ShiroExampleEvaluator) to implement  the permissions.
> I would like just to configure and use fuseki, not start a Java development
> I doesn't see clearly , by doing such code,
> * if i get something more efficient than what I do with shiro, following
> the documentation here
> https://jena.apache.org/documentation/fuseki2/fuseki-security.html
>
> * if I will be able to manage correctly the user interface while having
> some free datasets and some  protected dataset
> now, a window to enter a login/pwd is always displayed when I call the user
> interface, so I'm not able to give a free access to free datasets
> through the user interface
> In the section [urls] of shiro.ini, I have the following line to access the
> user interface
> / = anon
>
>
>
>
> --
> Jean-Claude Moissinac
>
>
>
> Le jeu. 21 nov. 2019 à 16:05, Marco Neumann <ma...@gmail.com> a
> écrit :
>
> > please take a look at
> >
> > https://jena.apache.org/documentation/permissions/index.html
> >
> >
> > On Thu 21. Nov 2019 at 14:00, Jean-Claude Moissinac <
> > jean-claude.moissinac@telecom-paristech.fr> wrote:
> >
> > > Hello
> > >
> > > I would like to give free access to some datasets in my fuseki server
> and
> > > control access to other datasets.
> > > With shiro, I'm able to control the sparql access points like
> > > https://myserver/dm/sparql
> > > but I'm not able to give a controlled access to the datasets user
> > interface
> > > https://myserver/dataset.html?tab=query&ds=/controlleddataset
> > > or
> > > https://myserver/dataset.html?tab=query&ds=/freedataset
> > > or
> > > https://myserver/
> > >
> > > Is there some good practices about the access control in fuseki
> > instances?
> > >
> > > Thank's in advance for any advice
> > > --
> > > Jean-Claude Moissinac
> > >
> > --
> >
> >
> > ---
> > Marco Neumann
> > KONA
> >
>


-- 
I like: Like Like - The likeliest place on the web
<http://like-like.xenei.com>
LinkedIn: http://www.linkedin.com/in/claudewarren

Re: Access control on Jena/fuseki datasets

Posted by Jean-Claude Moissinac <je...@telecom-paristech.fr>.
Dear Marco,

I think my previous reading of this documentation was right.
My understanding is that the proposed solution is to develop specific Java
code (like the ShiroExampleEvaluator) to implement  the permissions.
I would like just to configure and use fuseki, not start a Java development
I doesn't see clearly , by doing such code,
* if i get something more efficient than what I do with shiro, following
the documentation here
https://jena.apache.org/documentation/fuseki2/fuseki-security.html

* if I will be able to manage correctly the user interface while having
some free datasets and some  protected dataset
now, a window to enter a login/pwd is always displayed when I call the user
interface, so I'm not able to give a free access to free datasets
through the user interface
In the section [urls] of shiro.ini, I have the following line to access the
user interface
/ = anon




--
Jean-Claude Moissinac



Le jeu. 21 nov. 2019 à 16:05, Marco Neumann <ma...@gmail.com> a
écrit :

> please take a look at
>
> https://jena.apache.org/documentation/permissions/index.html
>
>
> On Thu 21. Nov 2019 at 14:00, Jean-Claude Moissinac <
> jean-claude.moissinac@telecom-paristech.fr> wrote:
>
> > Hello
> >
> > I would like to give free access to some datasets in my fuseki server and
> > control access to other datasets.
> > With shiro, I'm able to control the sparql access points like
> > https://myserver/dm/sparql
> > but I'm not able to give a controlled access to the datasets user
> interface
> > https://myserver/dataset.html?tab=query&ds=/controlleddataset
> > or
> > https://myserver/dataset.html?tab=query&ds=/freedataset
> > or
> > https://myserver/
> >
> > Is there some good practices about the access control in fuseki
> instances?
> >
> > Thank's in advance for any advice
> > --
> > Jean-Claude Moissinac
> >
> --
>
>
> ---
> Marco Neumann
> KONA
>

Re: Access control on Jena/fuseki datasets

Posted by Marco Neumann <ma...@gmail.com>.
please take a look at

https://jena.apache.org/documentation/permissions/index.html


On Thu 21. Nov 2019 at 14:00, Jean-Claude Moissinac <
jean-claude.moissinac@telecom-paristech.fr> wrote:

> Hello
>
> I would like to give free access to some datasets in my fuseki server and
> control access to other datasets.
> With shiro, I'm able to control the sparql access points like
> https://myserver/dm/sparql
> but I'm not able to give a controlled access to the datasets user interface
> https://myserver/dataset.html?tab=query&ds=/controlleddataset
> or
> https://myserver/dataset.html?tab=query&ds=/freedataset
> or
> https://myserver/
>
> Is there some good practices about the access control in fuseki instances?
>
> Thank's in advance for any advice
> --
> Jean-Claude Moissinac
>
-- 


---
Marco Neumann
KONA