You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@jmeter.apache.org by Harry_ <ha...@gmail.com> on 2009/11/10 19:30:52 UTC
Any way to start reading csv from particular position
In a Test Plan, I am referring csv file in HTTP request sampler.
I am running this plan through ant.
After some time I have to stop the test.
But now when I restart the test again, I want that csv file should be read
from the point where it was left earlier. But I dont find any option to
achieve this. So it starts reading from first line.
Please help if there is any way to achieve this. (Like if we can pass start
parameter to CSV Data Set Config, we can do this).
Regards
--
View this message in context: http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26287369.html
Sent from the JMeter - User mailing list archive at Nabble.com.
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: Any way to start reading csv from particular position
Posted by Harry_ <ha...@gmail.com>.
That is fine Deepak but in stress, the number of threads per JVM would be
more, that is why restarting seems to be a good idea to me. But Yeah if
things work fine for continuous runs as you are pointing for long duration
we will increase the number of loops accordingly.
Regards
Deepak Shetty wrote:
>
>>And I do not want any JVM instance to run for that long
> why?
>>In practice the value would be around 25000 or whatever best suits our
> system
>>without facing hardware problems.
> The number of requests shouldnt cause Jmeter any problems (unless you hold
> onto something). The number of concurrent requests is the limiting factor.
>
> regards
> deepak
>
> On Wed, Nov 11, 2009 at 12:56 PM, Harry_ <ha...@gmail.com> wrote:
>
>>
>> Yes I am already doing that Deepak. CSV is broken into multiple file as
>> per
>> the number of JVM instances we are going to run which depends upon the
>> test
>> type (Stress, Soak, Normal etc). These broken files are passed as
>> argument
>> only to JVMs as you said below.
>>
>> Still CSV's contain lakhs of different requests. And I do not want any
>> JVM
>> instance to run for that long. 1000 requests was just an example. In
>> practice the value would be around 25000 or whatever best suits our
>> system
>> without facing hardware problems.
>>
>> Regards
>>
>>
>> Deepak Shetty wrote:
>> >
>> > Sounds like overkill
>> >> Now after 1000 cycles I again call the same plan through ant (to avoid
>> > long runs)
>> > why?
>> > also why not generate multiple CSV files and pass that as a property to
>> > JMeter ...
>> >
>> > regars
>> > deepak
>> >
>> > On Wed, Nov 11, 2009 at 11:01 AM, Harry_ <ha...@gmail.com> wrote:
>> >
>> >>
>> >> Thanks for the reply deepak...
>> >>
>> >> I am calling Jmeter jmx plan from ant with loop count value of 1000.
>> The
>> >> requests in test plan reads request from csv file.
>> >>
>> >> Now after 1000 cycles I again call the same plan through ant (to avoid
>> >> long
>> >> runs). But now again plan starts reading from start of the file. As
>> you
>> >> said
>> >> this is as designed behavior, I wall call a java function after each
>> >> jMeter
>> >> test plan Run through ant, which will backup the existing file,
>> >> reshuffles
>> >> the link by placing first 1000 links at the end of the original file.
>> If
>> >> some error comes in between then backup file will replace the original
>> >> file.
>> >> Otherwise we will have file with non-visited or LRU links at the top
>> of
>> >> file. Now when plan will run again it will cal LRU links from the
>> start
>> >> of
>> >> file.
>> >>
>> >> If there is any other simple/clean way of achieving this do let me
>> know.
>> >>
>> >> Hope you get what I am saying...
>> >>
>> >> Regards
>> >>
>> >>
>> >> Deepak Shetty wrote:
>> >> >
>> >> > No direct way to do this, you could ofcourse code BSH/Java for
>> Jmeter
>> >> to
>> >> > work this way (you'd have to have a master CSV file of all records ,
>> a
>> >> way
>> >> > to specify what the last processed record is and a way to create a
>> new
>> >> CSV
>> >> > file/skip rows from that point onwards)
>> >> > Test runs ideally shouldnt be stateful, Im not sure what you are
>> trying
>> >> to
>> >> > accomplish by this technique
>> >> >
>> >> > regards
>> >> > deepak
>> >> >
>> >> >
>> >> > On Tue, Nov 10, 2009 at 10:30 AM, Harry_ <ha...@gmail.com>
>> wrote:
>> >> >
>> >> >>
>> >> >> In a Test Plan, I am referring csv file in HTTP request sampler.
>> >> >>
>> >> >> I am running this plan through ant.
>> >> >>
>> >> >> After some time I have to stop the test.
>> >> >>
>> >> >> But now when I restart the test again, I want that csv file should
>> be
>> >> >> read
>> >> >> from the point where it was left earlier. But I dont find any
>> option
>> >> to
>> >> >> achieve this. So it starts reading from first line.
>> >> >>
>> >> >> Please help if there is any way to achieve this. (Like if we can
>> pass
>> >> >> start
>> >> >> parameter to CSV Data Set Config, we can do this).
>> >> >>
>> >> >> Regards
>> >> >> --
>> >> >> View this message in context:
>> >> >>
>> >>
>> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26287369.html
>> >> >> Sent from the JMeter - User mailing list archive at Nabble.com.
>> >> >>
>> >> >>
>> >> >>
>> ---------------------------------------------------------------------
>> >> >> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>> >> >> For additional commands, e-mail:
>> jmeter-user-help@jakarta.apache.org
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >> --
>> >> View this message in context:
>> >>
>> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26306700.html
>> >> Sent from the JMeter - User mailing list archive at Nabble.com.
>> >>
>> >>
>> >> ---------------------------------------------------------------------
>> >> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>> >> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>> >>
>> >>
>> >
>> >
>>
>> --
>> View this message in context:
>> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26308464.html
>> Sent from the JMeter - User mailing list archive at Nabble.com.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>>
>>
>
>
--
View this message in context: http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26308605.html
Sent from the JMeter - User mailing list archive at Nabble.com.
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: Any way to start reading csv from particular position
Posted by Deepak Shetty <sh...@gmail.com>.
>And I do not want any JVM instance to run for that long
why?
>In practice the value would be around 25000 or whatever best suits our
system
>without facing hardware problems.
The number of requests shouldnt cause Jmeter any problems (unless you hold
onto something). The number of concurrent requests is the limiting factor.
regards
deepak
On Wed, Nov 11, 2009 at 12:56 PM, Harry_ <ha...@gmail.com> wrote:
>
> Yes I am already doing that Deepak. CSV is broken into multiple file as per
> the number of JVM instances we are going to run which depends upon the test
> type (Stress, Soak, Normal etc). These broken files are passed as argument
> only to JVMs as you said below.
>
> Still CSV's contain lakhs of different requests. And I do not want any JVM
> instance to run for that long. 1000 requests was just an example. In
> practice the value would be around 25000 or whatever best suits our system
> without facing hardware problems.
>
> Regards
>
>
> Deepak Shetty wrote:
> >
> > Sounds like overkill
> >> Now after 1000 cycles I again call the same plan through ant (to avoid
> > long runs)
> > why?
> > also why not generate multiple CSV files and pass that as a property to
> > JMeter ...
> >
> > regars
> > deepak
> >
> > On Wed, Nov 11, 2009 at 11:01 AM, Harry_ <ha...@gmail.com> wrote:
> >
> >>
> >> Thanks for the reply deepak...
> >>
> >> I am calling Jmeter jmx plan from ant with loop count value of 1000.
> The
> >> requests in test plan reads request from csv file.
> >>
> >> Now after 1000 cycles I again call the same plan through ant (to avoid
> >> long
> >> runs). But now again plan starts reading from start of the file. As you
> >> said
> >> this is as designed behavior, I wall call a java function after each
> >> jMeter
> >> test plan Run through ant, which will backup the existing file,
> >> reshuffles
> >> the link by placing first 1000 links at the end of the original file. If
> >> some error comes in between then backup file will replace the original
> >> file.
> >> Otherwise we will have file with non-visited or LRU links at the top of
> >> file. Now when plan will run again it will cal LRU links from the start
> >> of
> >> file.
> >>
> >> If there is any other simple/clean way of achieving this do let me know.
> >>
> >> Hope you get what I am saying...
> >>
> >> Regards
> >>
> >>
> >> Deepak Shetty wrote:
> >> >
> >> > No direct way to do this, you could ofcourse code BSH/Java for Jmeter
> >> to
> >> > work this way (you'd have to have a master CSV file of all records , a
> >> way
> >> > to specify what the last processed record is and a way to create a new
> >> CSV
> >> > file/skip rows from that point onwards)
> >> > Test runs ideally shouldnt be stateful, Im not sure what you are
> trying
> >> to
> >> > accomplish by this technique
> >> >
> >> > regards
> >> > deepak
> >> >
> >> >
> >> > On Tue, Nov 10, 2009 at 10:30 AM, Harry_ <ha...@gmail.com>
> wrote:
> >> >
> >> >>
> >> >> In a Test Plan, I am referring csv file in HTTP request sampler.
> >> >>
> >> >> I am running this plan through ant.
> >> >>
> >> >> After some time I have to stop the test.
> >> >>
> >> >> But now when I restart the test again, I want that csv file should be
> >> >> read
> >> >> from the point where it was left earlier. But I dont find any option
> >> to
> >> >> achieve this. So it starts reading from first line.
> >> >>
> >> >> Please help if there is any way to achieve this. (Like if we can pass
> >> >> start
> >> >> parameter to CSV Data Set Config, we can do this).
> >> >>
> >> >> Regards
> >> >> --
> >> >> View this message in context:
> >> >>
> >>
> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26287369.html
> >> >> Sent from the JMeter - User mailing list archive at Nabble.com.
> >> >>
> >> >>
> >> >> ---------------------------------------------------------------------
> >> >> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> >> >> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >> >>
> >> >>
> >> >
> >> >
> >>
> >> --
> >> View this message in context:
> >>
> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26306700.html
> >> Sent from the JMeter - User mailing list archive at Nabble.com.
> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> >> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >>
> >>
> >
> >
>
> --
> View this message in context:
> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26308464.html
> Sent from the JMeter - User mailing list archive at Nabble.com.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
Re: Any way to start reading csv from particular position
Posted by Harry_ <ha...@gmail.com>.
Yes I am already doing that Deepak. CSV is broken into multiple file as per
the number of JVM instances we are going to run which depends upon the test
type (Stress, Soak, Normal etc). These broken files are passed as argument
only to JVMs as you said below.
Still CSV's contain lakhs of different requests. And I do not want any JVM
instance to run for that long. 1000 requests was just an example. In
practice the value would be around 25000 or whatever best suits our system
without facing hardware problems.
Regards
Deepak Shetty wrote:
>
> Sounds like overkill
>> Now after 1000 cycles I again call the same plan through ant (to avoid
> long runs)
> why?
> also why not generate multiple CSV files and pass that as a property to
> JMeter ...
>
> regars
> deepak
>
> On Wed, Nov 11, 2009 at 11:01 AM, Harry_ <ha...@gmail.com> wrote:
>
>>
>> Thanks for the reply deepak...
>>
>> I am calling Jmeter jmx plan from ant with loop count value of 1000. The
>> requests in test plan reads request from csv file.
>>
>> Now after 1000 cycles I again call the same plan through ant (to avoid
>> long
>> runs). But now again plan starts reading from start of the file. As you
>> said
>> this is as designed behavior, I wall call a java function after each
>> jMeter
>> test plan Run through ant, which will backup the existing file,
>> reshuffles
>> the link by placing first 1000 links at the end of the original file. If
>> some error comes in between then backup file will replace the original
>> file.
>> Otherwise we will have file with non-visited or LRU links at the top of
>> file. Now when plan will run again it will cal LRU links from the start
>> of
>> file.
>>
>> If there is any other simple/clean way of achieving this do let me know.
>>
>> Hope you get what I am saying...
>>
>> Regards
>>
>>
>> Deepak Shetty wrote:
>> >
>> > No direct way to do this, you could ofcourse code BSH/Java for Jmeter
>> to
>> > work this way (you'd have to have a master CSV file of all records , a
>> way
>> > to specify what the last processed record is and a way to create a new
>> CSV
>> > file/skip rows from that point onwards)
>> > Test runs ideally shouldnt be stateful, Im not sure what you are trying
>> to
>> > accomplish by this technique
>> >
>> > regards
>> > deepak
>> >
>> >
>> > On Tue, Nov 10, 2009 at 10:30 AM, Harry_ <ha...@gmail.com> wrote:
>> >
>> >>
>> >> In a Test Plan, I am referring csv file in HTTP request sampler.
>> >>
>> >> I am running this plan through ant.
>> >>
>> >> After some time I have to stop the test.
>> >>
>> >> But now when I restart the test again, I want that csv file should be
>> >> read
>> >> from the point where it was left earlier. But I dont find any option
>> to
>> >> achieve this. So it starts reading from first line.
>> >>
>> >> Please help if there is any way to achieve this. (Like if we can pass
>> >> start
>> >> parameter to CSV Data Set Config, we can do this).
>> >>
>> >> Regards
>> >> --
>> >> View this message in context:
>> >>
>> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26287369.html
>> >> Sent from the JMeter - User mailing list archive at Nabble.com.
>> >>
>> >>
>> >> ---------------------------------------------------------------------
>> >> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>> >> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>> >>
>> >>
>> >
>> >
>>
>> --
>> View this message in context:
>> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26306700.html
>> Sent from the JMeter - User mailing list archive at Nabble.com.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>>
>>
>
>
--
View this message in context: http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26308464.html
Sent from the JMeter - User mailing list archive at Nabble.com.
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: Any way to start reading csv from particular position
Posted by Deepak Shetty <sh...@gmail.com>.
Sounds like overkill
> Now after 1000 cycles I again call the same plan through ant (to avoid
long runs)
why?
also why not generate multiple CSV files and pass that as a property to
JMeter ...
regars
deepak
On Wed, Nov 11, 2009 at 11:01 AM, Harry_ <ha...@gmail.com> wrote:
>
> Thanks for the reply deepak...
>
> I am calling Jmeter jmx plan from ant with loop count value of 1000. The
> requests in test plan reads request from csv file.
>
> Now after 1000 cycles I again call the same plan through ant (to avoid long
> runs). But now again plan starts reading from start of the file. As you
> said
> this is as designed behavior, I wall call a java function after each jMeter
> test plan Run through ant, which will backup the existing file, reshuffles
> the link by placing first 1000 links at the end of the original file. If
> some error comes in between then backup file will replace the original
> file.
> Otherwise we will have file with non-visited or LRU links at the top of
> file. Now when plan will run again it will cal LRU links from the start of
> file.
>
> If there is any other simple/clean way of achieving this do let me know.
>
> Hope you get what I am saying...
>
> Regards
>
>
> Deepak Shetty wrote:
> >
> > No direct way to do this, you could ofcourse code BSH/Java for Jmeter to
> > work this way (you'd have to have a master CSV file of all records , a
> way
> > to specify what the last processed record is and a way to create a new
> CSV
> > file/skip rows from that point onwards)
> > Test runs ideally shouldnt be stateful, Im not sure what you are trying
> to
> > accomplish by this technique
> >
> > regards
> > deepak
> >
> >
> > On Tue, Nov 10, 2009 at 10:30 AM, Harry_ <ha...@gmail.com> wrote:
> >
> >>
> >> In a Test Plan, I am referring csv file in HTTP request sampler.
> >>
> >> I am running this plan through ant.
> >>
> >> After some time I have to stop the test.
> >>
> >> But now when I restart the test again, I want that csv file should be
> >> read
> >> from the point where it was left earlier. But I dont find any option to
> >> achieve this. So it starts reading from first line.
> >>
> >> Please help if there is any way to achieve this. (Like if we can pass
> >> start
> >> parameter to CSV Data Set Config, we can do this).
> >>
> >> Regards
> >> --
> >> View this message in context:
> >>
> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26287369.html
> >> Sent from the JMeter - User mailing list archive at Nabble.com.
> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> >> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >>
> >>
> >
> >
>
> --
> View this message in context:
> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26306700.html
> Sent from the JMeter - User mailing list archive at Nabble.com.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
Re: Any way to start reading csv from particular position
Posted by Harry_ <ha...@gmail.com>.
Thanks for the reply deepak...
I am calling Jmeter jmx plan from ant with loop count value of 1000. The
requests in test plan reads request from csv file.
Now after 1000 cycles I again call the same plan through ant (to avoid long
runs). But now again plan starts reading from start of the file. As you said
this is as designed behavior, I wall call a java function after each jMeter
test plan Run through ant, which will backup the existing file, reshuffles
the link by placing first 1000 links at the end of the original file. If
some error comes in between then backup file will replace the original file.
Otherwise we will have file with non-visited or LRU links at the top of
file. Now when plan will run again it will cal LRU links from the start of
file.
If there is any other simple/clean way of achieving this do let me know.
Hope you get what I am saying...
Regards
Deepak Shetty wrote:
>
> No direct way to do this, you could ofcourse code BSH/Java for Jmeter to
> work this way (you'd have to have a master CSV file of all records , a way
> to specify what the last processed record is and a way to create a new CSV
> file/skip rows from that point onwards)
> Test runs ideally shouldnt be stateful, Im not sure what you are trying to
> accomplish by this technique
>
> regards
> deepak
>
>
> On Tue, Nov 10, 2009 at 10:30 AM, Harry_ <ha...@gmail.com> wrote:
>
>>
>> In a Test Plan, I am referring csv file in HTTP request sampler.
>>
>> I am running this plan through ant.
>>
>> After some time I have to stop the test.
>>
>> But now when I restart the test again, I want that csv file should be
>> read
>> from the point where it was left earlier. But I dont find any option to
>> achieve this. So it starts reading from first line.
>>
>> Please help if there is any way to achieve this. (Like if we can pass
>> start
>> parameter to CSV Data Set Config, we can do this).
>>
>> Regards
>> --
>> View this message in context:
>> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26287369.html
>> Sent from the JMeter - User mailing list archive at Nabble.com.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>>
>>
>
>
--
View this message in context: http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26306700.html
Sent from the JMeter - User mailing list archive at Nabble.com.
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
Re: Any way to start reading csv from particular position
Posted by Deepak Shetty <sh...@gmail.com>.
No direct way to do this, you could ofcourse code BSH/Java for Jmeter to
work this way (you'd have to have a master CSV file of all records , a way
to specify what the last processed record is and a way to create a new CSV
file/skip rows from that point onwards)
Test runs ideally shouldnt be stateful, Im not sure what you are trying to
accomplish by this technique
regards
deepak
On Tue, Nov 10, 2009 at 10:30 AM, Harry_ <ha...@gmail.com> wrote:
>
> In a Test Plan, I am referring csv file in HTTP request sampler.
>
> I am running this plan through ant.
>
> After some time I have to stop the test.
>
> But now when I restart the test again, I want that csv file should be read
> from the point where it was left earlier. But I dont find any option to
> achieve this. So it starts reading from first line.
>
> Please help if there is any way to achieve this. (Like if we can pass start
> parameter to CSV Data Set Config, we can do this).
>
> Regards
> --
> View this message in context:
> http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26287369.html
> Sent from the JMeter - User mailing list archive at Nabble.com.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
Re: Any way to start reading csv from particular position
Posted by sebb <se...@gmail.com>.
On 10/11/2009, Harry_ <ha...@gmail.com> wrote:
>
> In a Test Plan, I am referring csv file in HTTP request sampler.
>
> I am running this plan through ant.
>
> After some time I have to stop the test.
>
> But now when I restart the test again, I want that csv file should be read
> from the point where it was left earlier. But I dont find any option to
> achieve this. So it starts reading from first line.
>
> Please help if there is any way to achieve this. (Like if we can pass start
> parameter to CSV Data Set Config, we can do this).
No, JMeter does not support this.
However, since it is Open Source, you can update it to do whatever you want.
> Regards
>
> --
> View this message in context: http://old.nabble.com/Any-way-to-start-reading-csv-from-particular-position-tp26287369p26287369.html
> Sent from the JMeter - User mailing list archive at Nabble.com.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org