You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@etch.apache.org by James Dixson <di...@gmail.com> on 2009/02/20 18:27:02 UTC
[vote] Release 1.0.2 (second attempt)
Lets try this again..
I have taken all of the suggestions I have received and spun a new set
of release candidates.
The candidate files can be found here:
http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
Each file should have a MD5, SHA1 and a Signature. The output from RAT
is also included "*-rat-output.txt".
Please take the time to review the archives and then cast your vote. I
will hold the vote open until Tues (24-Feb).
RE: [vote] Release 1.0.2 (second attempt)
Posted by "Youngjin Park (youngjpa)" <yo...@cisco.com>.
+1
Youngjin
-----Original Message-----
From: James Dixson [mailto:dixson3@gmail.com]
Sent: Friday, February 20, 2009 11:27 AM
To: etch-dev@incubator.apache.org
Subject: [vote] Release 1.0.2 (second attempt)
Lets try this again..
I have taken all of the suggestions I have received and spun a new set
of release candidates.
The candidate files can be found here:
http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
Each file should have a MD5, SHA1 and a Signature. The output from RAT
is also included "*-rat-output.txt".
Please take the time to review the archives and then cast your vote. I
will hold the vote open until Tues (24-Feb).
RE: [vote] Release 1.0.2 (second attempt)
Posted by "J.D. Liau (jliau)" <jl...@cisco.com>.
+1 for release 1.0.2.
-----Original Message-----
From: James Dixson [mailto:dixson3@gmail.com]
Sent: Friday, February 20, 2009 11:27 AM
To: etch-dev@incubator.apache.org
Subject: [vote] Release 1.0.2 (second attempt)
Lets try this again..
I have taken all of the suggestions I have received and spun a new set
of release candidates.
The candidate files can be found here:
http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
Each file should have a MD5, SHA1 and a Signature. The output from RAT
is also included "*-rat-output.txt".
Please take the time to review the archives and then cast your vote. I
will hold the vote open until Tues (24-Feb).
Re: [vote] Release 1.0.2 (second attempt)
Posted by James Dixson <di...@gmail.com>.
Yeah!
+1 for me too.
I will submit to general-incubtor.
--
james
On Mar 2, 2009, at 11:58 AM, scott comer (sccomer) wrote:
> ok, the last installed i downloaded, which says release-24, works
> and the readme.txt is correct.
>
> +1
>
> scott out
>
> James Dixson wrote:
>> ok i will look at it again
>>
>> On Mon, Feb 23, 2009 at 4:44 PM, scott comer (sccomer)
>> <sc...@cisco.com> wrote:
>>
>>> eh, i installed and nothing was changed. the dates on the binaries
>>> are
>>> changed, but the readme was the same. the readme in the source
>>> distro was
>>> changed.
>>>
>>> scott out
>>>
>>> James Dixson wrote:
>>>
>>>> Ok, I have updated the binaries with the README change Scott
>>>> suggested.
>>>>
>>>> Scott: any comments?
>>>>
>>>> --
>>>> james
>>>>
>>>>
>>>> On Mon, Feb 23, 2009 at 3:50 PM, James Dixson
>>>> <ja...@cisco.com> wrote:
>>>>
>>>>
>>>>> I made the modifications and I am respinning. I will have updated
>>>>> downloads
>>>>> shortly (and it will not take a week this time ;-) ).
>>>>> --
>>>>> James
>>>>>
>>>>>
>>>>>
>>>>> On 2/23/09 2:01 PM, "Scott Comer (sccomer)" <sc...@cisco.com>
>>>>> wrote:
>>>>>
>>>>>
>>>>>
>>>>>> i'm still having problems with the readme.
>>>>>>
>>>>>> install path is claimed to be
>>>>>>
>>>>>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2-
>>>>>> incubating
>>>>>>
>>>>>> actual:
>>>>>>
>>>>>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2
>>>>>>
>>>>>> the sorting and indent in there is a bit wonky (tabs vs. spaces).
>>>>>>
>>>>>> other than that, +1.
>>>>>>
>>>>>> scott out
>>>>>>
>>>>>> Rene Barraza (rebarraz) wrote:
>>>>>>
>>>>>>
>>>>>>> +1
>>>>>>>
>>>>>>> -René
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Gaurav Sandhir (gsandhir)
>>>>>>> Sent: Monday, February 23, 2009 1:03 PM
>>>>>>> To: etch-dev@incubator.apache.org
>>>>>>> Subject: RE: [vote] Release 1.0.2 (second attempt)
>>>>>>>
>>>>>>> +1
>>>>>>>
>>>>>>> -Gaurav
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: James Dixson [mailto:dixson3@gmail.com]
>>>>>>> Sent: Friday, February 20, 2009 11:27 AM
>>>>>>> To: etch-dev@incubator.apache.org
>>>>>>> Subject: [vote] Release 1.0.2 (second attempt)
>>>>>>>
>>>>>>> Lets try this again..
>>>>>>>
>>>>>>> I have taken all of the suggestions I have received and spun a
>>>>>>> new set
>>>>>>> of release candidates.
>>>>>>>
>>>>>>> The candidate files can be found here:
>>>>>>> http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
>>>>>>>
>>>>>>> Each file should have a MD5, SHA1 and a Signature. The output
>>>>>>> from RAT
>>>>>>> is also included "*-rat-output.txt".
>>>>>>>
>>>>>>> Please take the time to review the archives and then cast your
>>>>>>> vote. I
>>>>>>> will hold the vote open until Tues (24-Feb).
>>>>>>>
>>>>>>> Internal Virus Database is out of date.
>>>>>>> Checked by AVG - www.avg.com
>>>>>>> Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release
>>>>>>> Date:
>>>>>>> 02/04/09
>>>>>>> 16:35:00
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> --
>>>>> James Dixson
>>>>> Manager, Software Development
>>>>> CUAE Engineering, Cisco Systems
>>>>> (e) jadixson@cisco.com
>>>>> (p) 512-336-3305
>>>>> (m) 512-968-2116
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
Re: [vote] Release 1.0.2 (second attempt)
Posted by "scott comer (sccomer)" <sc...@cisco.com>.
ok, the last installed i downloaded, which says release-24, works and
the readme.txt is correct.
+1
scott out
James Dixson wrote:
> ok i will look at it again
>
> On Mon, Feb 23, 2009 at 4:44 PM, scott comer (sccomer)
> <sc...@cisco.com> wrote:
>
>> eh, i installed and nothing was changed. the dates on the binaries are
>> changed, but the readme was the same. the readme in the source distro was
>> changed.
>>
>> scott out
>>
>> James Dixson wrote:
>>
>>> Ok, I have updated the binaries with the README change Scott suggested.
>>>
>>> Scott: any comments?
>>>
>>> --
>>> james
>>>
>>>
>>> On Mon, Feb 23, 2009 at 3:50 PM, James Dixson <ja...@cisco.com> wrote:
>>>
>>>
>>>> I made the modifications and I am respinning. I will have updated
>>>> downloads
>>>> shortly (and it will not take a week this time ;-) ).
>>>> --
>>>> James
>>>>
>>>>
>>>>
>>>> On 2/23/09 2:01 PM, "Scott Comer (sccomer)" <sc...@cisco.com> wrote:
>>>>
>>>>
>>>>
>>>>> i'm still having problems with the readme.
>>>>>
>>>>> install path is claimed to be
>>>>>
>>>>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2-incubating
>>>>>
>>>>> actual:
>>>>>
>>>>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2
>>>>>
>>>>> the sorting and indent in there is a bit wonky (tabs vs. spaces).
>>>>>
>>>>> other than that, +1.
>>>>>
>>>>> scott out
>>>>>
>>>>> Rene Barraza (rebarraz) wrote:
>>>>>
>>>>>
>>>>>> +1
>>>>>>
>>>>>> -René
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Gaurav Sandhir (gsandhir)
>>>>>> Sent: Monday, February 23, 2009 1:03 PM
>>>>>> To: etch-dev@incubator.apache.org
>>>>>> Subject: RE: [vote] Release 1.0.2 (second attempt)
>>>>>>
>>>>>> +1
>>>>>>
>>>>>> -Gaurav
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: James Dixson [mailto:dixson3@gmail.com]
>>>>>> Sent: Friday, February 20, 2009 11:27 AM
>>>>>> To: etch-dev@incubator.apache.org
>>>>>> Subject: [vote] Release 1.0.2 (second attempt)
>>>>>>
>>>>>> Lets try this again..
>>>>>>
>>>>>> I have taken all of the suggestions I have received and spun a new set
>>>>>> of release candidates.
>>>>>>
>>>>>> The candidate files can be found here:
>>>>>> http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
>>>>>>
>>>>>> Each file should have a MD5, SHA1 and a Signature. The output from RAT
>>>>>> is also included "*-rat-output.txt".
>>>>>>
>>>>>> Please take the time to review the archives and then cast your vote. I
>>>>>> will hold the vote open until Tues (24-Feb).
>>>>>>
>>>>>> Internal Virus Database is out of date.
>>>>>> Checked by AVG - www.avg.com
>>>>>> Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date:
>>>>>> 02/04/09
>>>>>> 16:35:00
>>>>>>
>>>>>>
>>>>>>
>>>> --
>>>> James Dixson
>>>> Manager, Software Development
>>>> CUAE Engineering, Cisco Systems
>>>> (e) jadixson@cisco.com
>>>> (p) 512-336-3305
>>>> (m) 512-968-2116
>>>>
>>>>
>>>>
>>>>
>>>>
Re: [vote] Release 1.0.2 (second attempt)
Posted by James Dixson <di...@gmail.com>.
ok i will look at it again
On Mon, Feb 23, 2009 at 4:44 PM, scott comer (sccomer)
<sc...@cisco.com> wrote:
> eh, i installed and nothing was changed. the dates on the binaries are
> changed, but the readme was the same. the readme in the source distro was
> changed.
>
> scott out
>
> James Dixson wrote:
>>
>> Ok, I have updated the binaries with the README change Scott suggested.
>>
>> Scott: any comments?
>>
>> --
>> james
>>
>>
>> On Mon, Feb 23, 2009 at 3:50 PM, James Dixson <ja...@cisco.com> wrote:
>>
>>>
>>> I made the modifications and I am respinning. I will have updated
>>> downloads
>>> shortly (and it will not take a week this time ;-) ).
>>> --
>>> James
>>>
>>>
>>>
>>> On 2/23/09 2:01 PM, "Scott Comer (sccomer)" <sc...@cisco.com> wrote:
>>>
>>>
>>>>
>>>> i'm still having problems with the readme.
>>>>
>>>> install path is claimed to be
>>>>
>>>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2-incubating
>>>>
>>>> actual:
>>>>
>>>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2
>>>>
>>>> the sorting and indent in there is a bit wonky (tabs vs. spaces).
>>>>
>>>> other than that, +1.
>>>>
>>>> scott out
>>>>
>>>> Rene Barraza (rebarraz) wrote:
>>>>
>>>>>
>>>>> +1
>>>>>
>>>>> -René
>>>>>
>>>>> -----Original Message-----
>>>>> From: Gaurav Sandhir (gsandhir)
>>>>> Sent: Monday, February 23, 2009 1:03 PM
>>>>> To: etch-dev@incubator.apache.org
>>>>> Subject: RE: [vote] Release 1.0.2 (second attempt)
>>>>>
>>>>> +1
>>>>>
>>>>> -Gaurav
>>>>>
>>>>> -----Original Message-----
>>>>> From: James Dixson [mailto:dixson3@gmail.com]
>>>>> Sent: Friday, February 20, 2009 11:27 AM
>>>>> To: etch-dev@incubator.apache.org
>>>>> Subject: [vote] Release 1.0.2 (second attempt)
>>>>>
>>>>> Lets try this again..
>>>>>
>>>>> I have taken all of the suggestions I have received and spun a new set
>>>>> of release candidates.
>>>>>
>>>>> The candidate files can be found here:
>>>>> http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
>>>>>
>>>>> Each file should have a MD5, SHA1 and a Signature. The output from RAT
>>>>> is also included "*-rat-output.txt".
>>>>>
>>>>> Please take the time to review the archives and then cast your vote. I
>>>>> will hold the vote open until Tues (24-Feb).
>>>>>
>>>>> Internal Virus Database is out of date.
>>>>> Checked by AVG - www.avg.com
>>>>> Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date:
>>>>> 02/04/09
>>>>> 16:35:00
>>>>>
>>>>>
>>>
>>> --
>>> James Dixson
>>> Manager, Software Development
>>> CUAE Engineering, Cisco Systems
>>> (e) jadixson@cisco.com
>>> (p) 512-336-3305
>>> (m) 512-968-2116
>>>
>>>
>>>
>>>
>
Re: [vote] Release 1.0.2 (second attempt)
Posted by "scott comer (sccomer)" <sc...@cisco.com>.
eh, i installed and nothing was changed. the dates on the binaries are
changed, but the readme was the same. the readme in the source distro
was changed.
scott out
James Dixson wrote:
> Ok, I have updated the binaries with the README change Scott suggested.
>
> Scott: any comments?
>
> --
> james
>
>
> On Mon, Feb 23, 2009 at 3:50 PM, James Dixson <ja...@cisco.com> wrote:
>
>> I made the modifications and I am respinning. I will have updated downloads
>> shortly (and it will not take a week this time ;-) ).
>> --
>> James
>>
>>
>>
>> On 2/23/09 2:01 PM, "Scott Comer (sccomer)" <sc...@cisco.com> wrote:
>>
>>
>>> i'm still having problems with the readme.
>>>
>>> install path is claimed to be
>>>
>>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2-incubating
>>>
>>> actual:
>>>
>>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2
>>>
>>> the sorting and indent in there is a bit wonky (tabs vs. spaces).
>>>
>>> other than that, +1.
>>>
>>> scott out
>>>
>>> Rene Barraza (rebarraz) wrote:
>>>
>>>> +1
>>>>
>>>> -René
>>>>
>>>> -----Original Message-----
>>>> From: Gaurav Sandhir (gsandhir)
>>>> Sent: Monday, February 23, 2009 1:03 PM
>>>> To: etch-dev@incubator.apache.org
>>>> Subject: RE: [vote] Release 1.0.2 (second attempt)
>>>>
>>>> +1
>>>>
>>>> -Gaurav
>>>>
>>>> -----Original Message-----
>>>> From: James Dixson [mailto:dixson3@gmail.com]
>>>> Sent: Friday, February 20, 2009 11:27 AM
>>>> To: etch-dev@incubator.apache.org
>>>> Subject: [vote] Release 1.0.2 (second attempt)
>>>>
>>>> Lets try this again..
>>>>
>>>> I have taken all of the suggestions I have received and spun a new set
>>>> of release candidates.
>>>>
>>>> The candidate files can be found here:
>>>> http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
>>>>
>>>> Each file should have a MD5, SHA1 and a Signature. The output from RAT
>>>> is also included "*-rat-output.txt".
>>>>
>>>> Please take the time to review the archives and then cast your vote. I
>>>> will hold the vote open until Tues (24-Feb).
>>>>
>>>> Internal Virus Database is out of date.
>>>> Checked by AVG - www.avg.com
>>>> Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date: 02/04/09
>>>> 16:35:00
>>>>
>>>>
>> --
>> James Dixson
>> Manager, Software Development
>> CUAE Engineering, Cisco Systems
>> (e) jadixson@cisco.com
>> (p) 512-336-3305
>> (m) 512-968-2116
>>
>>
>>
>>
Re: [vote] Release 1.0.2 (second attempt)
Posted by James Dixson <di...@gmail.com>.
Ok, I have updated the binaries with the README change Scott suggested.
Scott: any comments?
--
james
On Mon, Feb 23, 2009 at 3:50 PM, James Dixson <ja...@cisco.com> wrote:
> I made the modifications and I am respinning. I will have updated downloads
> shortly (and it will not take a week this time ;-) ).
> --
> James
>
>
>
> On 2/23/09 2:01 PM, "Scott Comer (sccomer)" <sc...@cisco.com> wrote:
>
>> i'm still having problems with the readme.
>>
>> install path is claimed to be
>>
>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2-incubating
>>
>> actual:
>>
>> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2
>>
>> the sorting and indent in there is a bit wonky (tabs vs. spaces).
>>
>> other than that, +1.
>>
>> scott out
>>
>> Rene Barraza (rebarraz) wrote:
>>> +1
>>>
>>> -René
>>>
>>> -----Original Message-----
>>> From: Gaurav Sandhir (gsandhir)
>>> Sent: Monday, February 23, 2009 1:03 PM
>>> To: etch-dev@incubator.apache.org
>>> Subject: RE: [vote] Release 1.0.2 (second attempt)
>>>
>>> +1
>>>
>>> -Gaurav
>>>
>>> -----Original Message-----
>>> From: James Dixson [mailto:dixson3@gmail.com]
>>> Sent: Friday, February 20, 2009 11:27 AM
>>> To: etch-dev@incubator.apache.org
>>> Subject: [vote] Release 1.0.2 (second attempt)
>>>
>>> Lets try this again..
>>>
>>> I have taken all of the suggestions I have received and spun a new set
>>> of release candidates.
>>>
>>> The candidate files can be found here:
>>> http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
>>>
>>> Each file should have a MD5, SHA1 and a Signature. The output from RAT
>>> is also included "*-rat-output.txt".
>>>
>>> Please take the time to review the archives and then cast your vote. I
>>> will hold the vote open until Tues (24-Feb).
>>>
>>> Internal Virus Database is out of date.
>>> Checked by AVG - www.avg.com
>>> Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date: 02/04/09
>>> 16:35:00
>>>
>
> --
> James Dixson
> Manager, Software Development
> CUAE Engineering, Cisco Systems
> (e) jadixson@cisco.com
> (p) 512-336-3305
> (m) 512-968-2116
>
>
>
Re: [vote] Release 1.0.2 (second attempt)
Posted by James Dixson <ja...@cisco.com>.
I made the modifications and I am respinning. I will have updated downloads
shortly (and it will not take a week this time ;-) ).
--
James
On 2/23/09 2:01 PM, "Scott Comer (sccomer)" <sc...@cisco.com> wrote:
> i'm still having problems with the readme.
>
> install path is claimed to be
>
> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2-incubating
>
> actual:
>
> C:\Program Files\Apache Software Foundation\apache-etch-1.0.2
>
> the sorting and indent in there is a bit wonky (tabs vs. spaces).
>
> other than that, +1.
>
> scott out
>
> Rene Barraza (rebarraz) wrote:
>> +1
>>
>> -René
>>
>> -----Original Message-----
>> From: Gaurav Sandhir (gsandhir)
>> Sent: Monday, February 23, 2009 1:03 PM
>> To: etch-dev@incubator.apache.org
>> Subject: RE: [vote] Release 1.0.2 (second attempt)
>>
>> +1
>>
>> -Gaurav
>>
>> -----Original Message-----
>> From: James Dixson [mailto:dixson3@gmail.com]
>> Sent: Friday, February 20, 2009 11:27 AM
>> To: etch-dev@incubator.apache.org
>> Subject: [vote] Release 1.0.2 (second attempt)
>>
>> Lets try this again..
>>
>> I have taken all of the suggestions I have received and spun a new set
>> of release candidates.
>>
>> The candidate files can be found here:
>> http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
>>
>> Each file should have a MD5, SHA1 and a Signature. The output from RAT
>> is also included "*-rat-output.txt".
>>
>> Please take the time to review the archives and then cast your vote. I
>> will hold the vote open until Tues (24-Feb).
>>
>> Internal Virus Database is out of date.
>> Checked by AVG - www.avg.com
>> Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date: 02/04/09
>> 16:35:00
>>
--
James Dixson
Manager, Software Development
CUAE Engineering, Cisco Systems
(e) jadixson@cisco.com
(p) 512-336-3305
(m) 512-968-2116
Re: [vote] Release 1.0.2 (second attempt)
Posted by "scott comer (sccomer)" <sc...@cisco.com>.
i'm still having problems with the readme.
install path is claimed to be
C:\Program Files\Apache Software Foundation\apache-etch-1.0.2-incubating
actual:
C:\Program Files\Apache Software Foundation\apache-etch-1.0.2
the sorting and indent in there is a bit wonky (tabs vs. spaces).
other than that, +1.
scott out
Rene Barraza (rebarraz) wrote:
> +1
>
> -René
>
> -----Original Message-----
> From: Gaurav Sandhir (gsandhir)
> Sent: Monday, February 23, 2009 1:03 PM
> To: etch-dev@incubator.apache.org
> Subject: RE: [vote] Release 1.0.2 (second attempt)
>
> +1
>
> -Gaurav
>
> -----Original Message-----
> From: James Dixson [mailto:dixson3@gmail.com]
> Sent: Friday, February 20, 2009 11:27 AM
> To: etch-dev@incubator.apache.org
> Subject: [vote] Release 1.0.2 (second attempt)
>
> Lets try this again..
>
> I have taken all of the suggestions I have received and spun a new set
> of release candidates.
>
> The candidate files can be found here:
> http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
>
> Each file should have a MD5, SHA1 and a Signature. The output from RAT
> is also included "*-rat-output.txt".
>
> Please take the time to review the archives and then cast your vote. I
> will hold the vote open until Tues (24-Feb).
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date: 02/04/09 16:35:00
>
RE: [vote] Release 1.0.2 (second attempt)
Posted by "Rene Barraza (rebarraz)" <re...@cisco.com>.
+1
-René
-----Original Message-----
From: Gaurav Sandhir (gsandhir)
Sent: Monday, February 23, 2009 1:03 PM
To: etch-dev@incubator.apache.org
Subject: RE: [vote] Release 1.0.2 (second attempt)
+1
-Gaurav
-----Original Message-----
From: James Dixson [mailto:dixson3@gmail.com]
Sent: Friday, February 20, 2009 11:27 AM
To: etch-dev@incubator.apache.org
Subject: [vote] Release 1.0.2 (second attempt)
Lets try this again..
I have taken all of the suggestions I have received and spun a new set
of release candidates.
The candidate files can be found here:
http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
Each file should have a MD5, SHA1 and a Signature. The output from RAT
is also included "*-rat-output.txt".
Please take the time to review the archives and then cast your vote. I
will hold the vote open until Tues (24-Feb).
Internal Virus Database is out of date.
Checked by AVG - www.avg.com
Version: 8.0.233 / Virus Database: 270.10.18/1935 - Release Date: 02/04/09 16:35:00
RE: [vote] Release 1.0.2 (second attempt)
Posted by "Gaurav Sandhir (gsandhir)" <gs...@cisco.com>.
+1
-Gaurav
-----Original Message-----
From: James Dixson [mailto:dixson3@gmail.com]
Sent: Friday, February 20, 2009 11:27 AM
To: etch-dev@incubator.apache.org
Subject: [vote] Release 1.0.2 (second attempt)
Lets try this again..
I have taken all of the suggestions I have received and spun a new set
of release candidates.
The candidate files can be found here:
http://people.apache.org/~dixson/apache-etch/1.0.2-incubating/
Each file should have a MD5, SHA1 and a Signature. The output from RAT
is also included "*-rat-output.txt".
Please take the time to review the archives and then cast your vote. I
will hold the vote open until Tues (24-Feb).