You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@felix.apache.org by Sam Spycher <sa...@spycher.info> on 2011/09/28 16:43:18 UTC
Command not found: obr / obr:addUrl / obr:add-url / ...
Hi
I just downloaded the Felix framework distribution version 4.0.0 yesterday and have been trying to get our eclipse/equinox-developed project working with it, since this is our target platform.
The following has me feeling a little bit stupid:
g! obr add-url /<myhome>/.m2/repository/repository.xml
gogo: CommandNotFoundException: Command not found: obr
g! obr:addUrl /<myhome>/.m2/repository/repository.xml
gogo: CommandNotFoundException: Command not found: obr:addUrl
etc. with other variations attempted.
Is the documentation out of date or am I missing something glaringly obvious?
'help' will list a few obr commands which also work, but I cannot find any documentation on getting the above command and similar ones installed.
Here are the currently active bundles (I have tried all sorts of combinations prior to this clean slate, by downloading and placing manually them into the bundle/ directory ):
g! lb
START LEVEL 1
ID|State |Level|Name
0|Active | 0|System Bundle (4.0.0)
1|Active | 1|Apache Felix Bundle Repository (1.6.6)
2|Active | 1|Apache Felix Gogo Command (0.12.0)
3|Active | 1|Apache Felix Gogo Runtime (0.10.0)
4|Active | 1|Apache Felix Gogo Shell (0.10.0)
Thanks for any help,
Sam
Re: Command not found: obr / obr:addUrl / obr:add-url / ...
Posted by "Richard S. Hall" <he...@ungoverned.org>.
I think you want the obr:repos command...type "help repos"...
-> richard
On 9/28/11 10:43 AM, Sam Spycher wrote:
> Hi
>
> I just downloaded the Felix framework distribution version 4.0.0 yesterday and have been trying to get our eclipse/equinox-developed project working with it, since this is our target platform.
>
> The following has me feeling a little bit stupid:
>
> g! obr add-url /<myhome>/.m2/repository/repository.xml
> gogo: CommandNotFoundException: Command not found: obr
>
> g! obr:addUrl /<myhome>/.m2/repository/repository.xml
> gogo: CommandNotFoundException: Command not found: obr:addUrl
>
> etc. with other variations attempted.
>
> Is the documentation out of date or am I missing something glaringly obvious?
>
> 'help' will list a few obr commands which also work, but I cannot find any documentation on getting the above command and similar ones installed.
>
> Here are the currently active bundles (I have tried all sorts of combinations prior to this clean slate, by downloading and placing manually them into the bundle/ directory ):
>
> g! lb
> START LEVEL 1
> ID|State |Level|Name
> 0|Active | 0|System Bundle (4.0.0)
> 1|Active | 1|Apache Felix Bundle Repository (1.6.6)
> 2|Active | 1|Apache Felix Gogo Command (0.12.0)
> 3|Active | 1|Apache Felix Gogo Runtime (0.10.0)
> 4|Active | 1|Apache Felix Gogo Shell (0.10.0)
>
>
> Thanks for any help,
> Sam
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@felix.apache.org
For additional commands, e-mail: users-help@felix.apache.org
Re: Command not found: obr / obr:addUrl / obr:add-url / ...
Posted by Karl Pauls <ka...@gmail.com>.
you can use the help command to see some more info:
g! help obr:repos
repos - manage repositories
scope: obr
parameters:
String ( add | list | refresh | remove )
String[] space-delimited list of repository URLs
g!
regards,
Karl
On Wed, Sep 28, 2011 at 5:09 PM, Sam Spycher <sa...@spycher.info> wrote:
> Thanks for your help Karl, that worked!
>
> Can you tell me if this is documented anywhere?
>
> I saw obr:repos, and yes "add" is pretty intuitive, but is there
> documentation for this somewhere apart from in the source? I don't want
> to continue spamming this list with trivialities...
>
> Regards,
> Sam
>
>
>
> Am 28.09.11 16:59, schrieb Karl Pauls:
>> I think you are looking for:
>>
>> g! obr:repos add <url>
>>
>> regards,
>>
>> Karl
>>
>> On Wed, Sep 28, 2011 at 4:43 PM, Sam Spycher <sa...@spycher.info> wrote:
>>> Hi
>>>
>>> I just downloaded the Felix framework distribution version 4.0.0 yesterday and have been trying to get our eclipse/equinox-developed project working with it, since this is our target platform.
>>>
>>> The following has me feeling a little bit stupid:
>>>
>>> g! obr add-url /<myhome>/.m2/repository/repository.xml
>>> gogo: CommandNotFoundException: Command not found: obr
>>>
>>> g! obr:addUrl /<myhome>/.m2/repository/repository.xml
>>> gogo: CommandNotFoundException: Command not found: obr:addUrl
>>>
>>> etc. with other variations attempted.
>>>
>>> Is the documentation out of date or am I missing something glaringly obvious?
>>>
>>> 'help' will list a few obr commands which also work, but I cannot find any documentation on getting the above command and similar ones installed.
>>>
>>> Here are the currently active bundles (I have tried all sorts of combinations prior to this clean slate, by downloading and placing manually them into the bundle/ directory ):
>>>
>>> g! lb
>>> START LEVEL 1
>>> ID|State |Level|Name
>>> 0|Active | 0|System Bundle (4.0.0)
>>> 1|Active | 1|Apache Felix Bundle Repository (1.6.6)
>>> 2|Active | 1|Apache Felix Gogo Command (0.12.0)
>>> 3|Active | 1|Apache Felix Gogo Runtime (0.10.0)
>>> 4|Active | 1|Apache Felix Gogo Shell (0.10.0)
>>>
>>>
>>> Thanks for any help,
>>> Sam
>>>
>>>
>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@felix.apache.org
> For additional commands, e-mail: users-help@felix.apache.org
>
>
--
Karl Pauls
karlpauls@gmail.com
http://twitter.com/karlpauls
http://www.linkedin.com/in/karlpauls
https://profiles.google.com/karlpauls
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@felix.apache.org
For additional commands, e-mail: users-help@felix.apache.org
Re: Command not found: obr / obr:addUrl / obr:add-url / ...
Posted by Sam Spycher <sa...@spycher.info>.
Sorry, that was too quick, don't know how I missed "help repos" ...
Thanks again for the kickstart,
Sam
Am 28.09.11 17:09, schrieb Sam Spycher:
> Thanks for your help Karl, that worked!
>
> Can you tell me if this is documented anywhere?
>
> I saw obr:repos, and yes "add" is pretty intuitive, but is there
> documentation for this somewhere apart from in the source? I don't want
> to continue spamming this list with trivialities...
>
> Regards,
> Sam
>
>
>
> Am 28.09.11 16:59, schrieb Karl Pauls:
>> I think you are looking for:
>>
>> g! obr:repos add <url>
>>
>> regards,
>>
>> Karl
>>
>> On Wed, Sep 28, 2011 at 4:43 PM, Sam Spycher <sa...@spycher.info> wrote:
>>> Hi
>>>
>>> I just downloaded the Felix framework distribution version 4.0.0 yesterday and have been trying to get our eclipse/equinox-developed project working with it, since this is our target platform.
>>>
>>> The following has me feeling a little bit stupid:
>>>
>>> g! obr add-url /<myhome>/.m2/repository/repository.xml
>>> gogo: CommandNotFoundException: Command not found: obr
>>>
>>> g! obr:addUrl /<myhome>/.m2/repository/repository.xml
>>> gogo: CommandNotFoundException: Command not found: obr:addUrl
>>>
>>> etc. with other variations attempted.
>>>
>>> Is the documentation out of date or am I missing something glaringly obvious?
>>>
>>> 'help' will list a few obr commands which also work, but I cannot find any documentation on getting the above command and similar ones installed.
>>>
>>> Here are the currently active bundles (I have tried all sorts of combinations prior to this clean slate, by downloading and placing manually them into the bundle/ directory ):
>>>
>>> g! lb
>>> START LEVEL 1
>>> ID|State |Level|Name
>>> 0|Active | 0|System Bundle (4.0.0)
>>> 1|Active | 1|Apache Felix Bundle Repository (1.6.6)
>>> 2|Active | 1|Apache Felix Gogo Command (0.12.0)
>>> 3|Active | 1|Apache Felix Gogo Runtime (0.10.0)
>>> 4|Active | 1|Apache Felix Gogo Shell (0.10.0)
>>>
>>>
>>> Thanks for any help,
>>> Sam
>>>
>>>
>>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@felix.apache.org
For additional commands, e-mail: users-help@felix.apache.org
Re: Command not found: obr / obr:addUrl / obr:add-url / ...
Posted by Sam Spycher <sa...@spycher.info>.
Thanks for your help Karl, that worked!
Can you tell me if this is documented anywhere?
I saw obr:repos, and yes "add" is pretty intuitive, but is there
documentation for this somewhere apart from in the source? I don't want
to continue spamming this list with trivialities...
Regards,
Sam
Am 28.09.11 16:59, schrieb Karl Pauls:
> I think you are looking for:
>
> g! obr:repos add <url>
>
> regards,
>
> Karl
>
> On Wed, Sep 28, 2011 at 4:43 PM, Sam Spycher <sa...@spycher.info> wrote:
>> Hi
>>
>> I just downloaded the Felix framework distribution version 4.0.0 yesterday and have been trying to get our eclipse/equinox-developed project working with it, since this is our target platform.
>>
>> The following has me feeling a little bit stupid:
>>
>> g! obr add-url /<myhome>/.m2/repository/repository.xml
>> gogo: CommandNotFoundException: Command not found: obr
>>
>> g! obr:addUrl /<myhome>/.m2/repository/repository.xml
>> gogo: CommandNotFoundException: Command not found: obr:addUrl
>>
>> etc. with other variations attempted.
>>
>> Is the documentation out of date or am I missing something glaringly obvious?
>>
>> 'help' will list a few obr commands which also work, but I cannot find any documentation on getting the above command and similar ones installed.
>>
>> Here are the currently active bundles (I have tried all sorts of combinations prior to this clean slate, by downloading and placing manually them into the bundle/ directory ):
>>
>> g! lb
>> START LEVEL 1
>> ID|State |Level|Name
>> 0|Active | 0|System Bundle (4.0.0)
>> 1|Active | 1|Apache Felix Bundle Repository (1.6.6)
>> 2|Active | 1|Apache Felix Gogo Command (0.12.0)
>> 3|Active | 1|Apache Felix Gogo Runtime (0.10.0)
>> 4|Active | 1|Apache Felix Gogo Shell (0.10.0)
>>
>>
>> Thanks for any help,
>> Sam
>>
>>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@felix.apache.org
For additional commands, e-mail: users-help@felix.apache.org
Re: Command not found: obr / obr:addUrl / obr:add-url / ...
Posted by Karl Pauls <ka...@gmail.com>.
I think you are looking for:
g! obr:repos add <url>
regards,
Karl
On Wed, Sep 28, 2011 at 4:43 PM, Sam Spycher <sa...@spycher.info> wrote:
> Hi
>
> I just downloaded the Felix framework distribution version 4.0.0 yesterday and have been trying to get our eclipse/equinox-developed project working with it, since this is our target platform.
>
> The following has me feeling a little bit stupid:
>
> g! obr add-url /<myhome>/.m2/repository/repository.xml
> gogo: CommandNotFoundException: Command not found: obr
>
> g! obr:addUrl /<myhome>/.m2/repository/repository.xml
> gogo: CommandNotFoundException: Command not found: obr:addUrl
>
> etc. with other variations attempted.
>
> Is the documentation out of date or am I missing something glaringly obvious?
>
> 'help' will list a few obr commands which also work, but I cannot find any documentation on getting the above command and similar ones installed.
>
> Here are the currently active bundles (I have tried all sorts of combinations prior to this clean slate, by downloading and placing manually them into the bundle/ directory ):
>
> g! lb
> START LEVEL 1
> ID|State |Level|Name
> 0|Active | 0|System Bundle (4.0.0)
> 1|Active | 1|Apache Felix Bundle Repository (1.6.6)
> 2|Active | 1|Apache Felix Gogo Command (0.12.0)
> 3|Active | 1|Apache Felix Gogo Runtime (0.10.0)
> 4|Active | 1|Apache Felix Gogo Shell (0.10.0)
>
>
> Thanks for any help,
> Sam
>
>
--
Karl Pauls
karlpauls@gmail.com
http://twitter.com/karlpauls
http://www.linkedin.com/in/karlpauls
https://profiles.google.com/karlpauls
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@felix.apache.org
For additional commands, e-mail: users-help@felix.apache.org