You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by ad...@apache.org on 2016/06/15 22:03:47 UTC
[04/51] [partial] incubator-mynewt-site git commit: Fixed broken
Quick Start link and added OpenOCD option for Arduino Primo debugging
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/delay.h
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/delay.h b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/delay.h
new file mode 100755
index 0000000..59fb49f
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/delay.h
@@ -0,0 +1,34 @@
+/***************************************************************************
+ * Copyright (C) 2011 by Martin Schmoelzer *
+ * <ma...@student.tuwien.ac.at> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ ***************************************************************************/
+
+#ifndef __DELAY_H
+#define __DELAY_H
+
+#include <stdint.h>
+
+#define NOP { __asm nop __endasm; }
+
+void delay_5us(void);
+void delay_1ms(void);
+
+void delay_us(uint16_t delay);
+void delay_ms(uint16_t delay);
+
+#endif
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/io.h
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/io.h b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/io.h
new file mode 100755
index 0000000..8077d32
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/io.h
@@ -0,0 +1,124 @@
+/***************************************************************************
+ * Copyright (C) 2011 by Martin Schmoelzer *
+ * <ma...@student.tuwien.ac.at> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ ***************************************************************************/
+
+#ifndef __IO_H
+#define __IO_H
+
+#include "reg_ezusb.h"
+
+/***************************************************************************
+ * JTAG Signals: *
+ ***************************************************************************
+ * TMS ....... Test Mode Select *
+ * TCK ....... Test Clock *
+ * TDI ....... Test Data Input (from device point of view, not JTAG *
+ * adapter point of view!) *
+ * TDO ....... Test Data Output (from device point of view, not JTAG *
+ * adapter point of view!) *
+ * TRST ...... Test Reset: Used to reset the TAP Finite State Machine *
+ * into the Test Logic Reset state *
+ * RTCK ...... Return Test Clock *
+ * OCDSE ..... Enable/Disable OCDS interface (Infineon specific) - shared *
+ * with /JEN *
+ * TRAP ...... Trap Condition (Infineon specific) - shared with TSTAT *
+ * BRKIN ..... Hardware Break-In (Infineon specific) *
+ * BRKOUT .... Hardware Break-Out (Infineon specific) *
+ * /JEN ...... JTAG-Enable (STMicroelectronics specific) - shared *
+ * with OCDSE *
+ * TSTAT ..... JTAG ISP Status (STMicroelectronics specific) - shared *
+ * with TRAP *
+ * RESET ..... Chip Reset (STMicroelectronics specific) *
+ * /TERR ..... JTAG ISP Error (STMicroelectronics specific) - shared *
+ * with BRKOUT *
+ ***************************************************************************/
+
+/* PORT A */
+#define PIN_U_OE OUTA0
+/* PA1 Not Connected */
+#define PIN_OE OUTA2
+/* PA3 Not Connected */
+#define PIN_RUN_LED OUTA4
+#define PIN_TDO PINA5
+#define PIN_BRKOUT PINA6
+#define PIN_COM_LED OUTA7
+
+/* PORT B */
+#define PIN_TDI OUTB0
+#define PIN_TMS OUTB1
+#define PIN_TCK OUTB2
+#define PIN_TRST OUTB3
+#define PIN_BRKIN OUTB4
+#define PIN_RESET OUTB5
+#define PIN_OCDSE OUTB6
+#define PIN_TRAP PINB7
+
+/* JTAG Signals with direction 'OUT' on port B */
+#define MASK_PORTB_DIRECTION_OUT (PIN_TDI | PIN_TMS | PIN_TCK | PIN_TRST | PIN_BRKIN | PIN_RESET | PIN_OCDSE)
+
+/* PORT C */
+#define PIN_RXD0 PINC0
+#define PIN_TXD0 OUTC1
+#define PIN_RESET_2 PINC2
+/* PC3 Not Connecte */
+/* PC4 Not Connected */
+#define PIN_RTCK PINC5
+#define PIN_WR OUTC6
+/* PC7 Not Connected */
+
+/* LED Macros */
+#define SET_RUN_LED() (OUTA &= ~PIN_RUN_LED)
+#define CLEAR_RUN_LED() (OUTA |= PIN_RUN_LED)
+
+#define SET_COM_LED() (OUTA &= ~PIN_COM_LED)
+#define CLEAR_COM_LED() (OUTA |= PIN_COM_LED)
+
+/* JTAG Pin Macros */
+#define GET_TMS() (PINSB & PIN_TMS)
+#define GET_TCK() (PINSB & PIN_TCK)
+
+#define GET_TDO() (PINSA & PIN_TDO)
+#define GET_BRKOUT() (PINSA & PIN_BRKOUT)
+#define GET_TRAP() (PINSB & PIN_TRAP)
+#define GET_RTCK() (PINSC & PIN_RTCK)
+
+#define SET_TMS_HIGH() (OUTB |= PIN_TMS)
+#define SET_TMS_LOW() (OUTB &= ~PIN_TMS)
+
+#define SET_TCK_HIGH() (OUTB |= PIN_TCK)
+#define SET_TCK_LOW() (OUTB &= ~PIN_TCK)
+
+#define SET_TDI_HIGH() (OUTB |= PIN_TDI)
+#define SET_TDI_LOW() (OUTB &= ~PIN_TDI)
+
+/* TRST and RESET are low-active and inverted by hardware. SET_HIGH de-asserts
+ * the signal (enabling reset), SET_LOW asserts the signal (disabling reset) */
+#define SET_TRST_HIGH() (OUTB |= PIN_TRST)
+#define SET_TRST_LOW() (OUTB &= ~PIN_TRST)
+
+#define SET_RESET_HIGH() (OUTB |= PIN_RESET)
+#define SET_RESET_LOW() (OUTB &= ~PIN_RESET)
+
+#define SET_OCDSE_HIGH() (OUTB |= PIN_OCDSE)
+#define SET_OCDSE_LOW() (OUTB &= ~PIN_OCDSE)
+
+#define SET_BRKIN_HIGH() (OUTB |= PIN_BRKIN)
+#define SET_BRKIN_LOW() (OUTB &= ~PIN_BRKIN)
+
+#endif
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/jtag.h
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/jtag.h b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/jtag.h
new file mode 100755
index 0000000..ee2457e
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/jtag.h
@@ -0,0 +1,48 @@
+/***************************************************************************
+ * Copyright (C) 2011 by Martin Schmoelzer *
+ * <ma...@student.tuwien.ac.at> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ ***************************************************************************/
+
+#ifndef __JTAG_H
+#define __JTAG_H
+
+#include <stdint.h>
+
+#define NOP { __asm nop __endasm; }
+
+void jtag_scan_in(uint8_t out_offset, uint8_t in_offset);
+void jtag_slow_scan_in(uint8_t out_offset, uint8_t in_offset);
+
+void jtag_scan_out(uint8_t out_offset);
+void jtag_slow_scan_out(uint8_t out_offset);
+
+void jtag_scan_io(uint8_t out_offset, uint8_t in_offset);
+void jtag_slow_scan_io(uint8_t out_offset, uint8_t in_offset);
+
+void jtag_clock_tck(uint16_t count);
+void jtag_slow_clock_tck(uint16_t count);
+void jtag_clock_tms(uint8_t count, uint8_t sequence);
+void jtag_slow_clock_tms(uint8_t count, uint8_t sequence);
+
+uint16_t jtag_get_signals(void);
+void jtag_set_signals(uint8_t low, uint8_t high);
+
+void jtag_configure_tck_delay(uint8_t scan_in, uint8_t scan_out,
+ uint8_t scan_io, uint8_t tck, uint8_t tms);
+
+#endif
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/main.h
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/main.h b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/main.h
new file mode 100755
index 0000000..5f7418f
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/main.h
@@ -0,0 +1,26 @@
+/***************************************************************************
+ * Copyright (C) 2011 by Martin Schmoelzer *
+ * <ma...@student.tuwien.ac.at> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ ***************************************************************************/
+
+#ifndef __MAIN_H
+#define __MAIN_H
+
+void io_init(void);
+
+#endif
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/msgtypes.h
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/msgtypes.h b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/msgtypes.h
new file mode 100755
index 0000000..9dbbedd
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/msgtypes.h
@@ -0,0 +1,191 @@
+/***************************************************************************
+ * Copyright (C) 2011 by Martin Schmoelzer *
+ * <ma...@student.tuwien.ac.at> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ ***************************************************************************/
+
+/**
+ * @file
+ * Definition of the commands supported by the OpenULINK firmware.
+ *
+ * Basically, two types of commands can be distinguished:
+ * - Commands with fixed payload size
+ * - Commands with variable payload size
+ *
+ * SCAN commands (in all variations) carry payloads of variable size, all
+ * other commands carry payloads of fixed size.
+ *
+ * In the case of SCAN commands, the payload size (n) is calculated by
+ * dividing the scan_size_bits variable by 8, rounding up the result.
+ *
+ * Offset zero always contains the command ID.
+ *
+ ****************************************************************************
+ * CMD_SCAN_IN, CMD_SLOW_SCAN_IN: *
+ * *
+ * OUT: *
+ * offset 1: scan_size_bytes *
+ * offset 2: bits_last_byte *
+ * offset 3: tms_count_start + tms_count_end *
+ * offset 4: tms_sequence_start *
+ * offset 5: tms_sequence_end *
+ * *
+ * IN: *
+ * offset 0..n: TDO data *
+ ****************************************************************************
+ * CMD_SCAN_OUT, CMD_SLOW_SCAN_OUT: *
+ * *
+ * OUT: *
+ * offset 1: scan_size_bytes *
+ * offset 2: bits_last_byte *
+ * offset 3: tms_count_start + tms_count_end *
+ * offset 4: tms_sequence_start *
+ * offset 5: tms_sequence_end *
+ * offset 6..x: TDI data *
+ ****************************************************************************
+ * CMD_SCAN_IO, CMD_SLOW_SCAN_IO: *
+ * *
+ * OUT: *
+ * offset 1: scan_size_bytes *
+ * offset 2: bits_last_byte *
+ * offset 3: tms_count_start + tms_count_end *
+ * offset 4: tms_sequence_start *
+ * offset 5: tms_sequence_end *
+ * offset 6..x: TDI data *
+ * *
+ * IN: *
+ * offset 0..n: TDO data *
+ ****************************************************************************
+ * CMD_CLOCK_TMS, CMD_SLOW_CLOCK_TMS: *
+ * *
+ * OUT: *
+ * offset 1: tms_count *
+ * offset 2: tms_sequence *
+ ****************************************************************************
+ * CMD_CLOCK_TCK, CMD_SLOW_CLOCK_TCK: *
+ * *
+ * OUT: *
+ * offset 1: low byte of tck_count *
+ * offset 2: high byte of tck_count *
+ ****************************************************************************
+ * CMD_CLOCK_SLEEP_US: *
+ * *
+ * OUT: *
+ * offset 1: low byte of sleep_us *
+ * offset 2: high byte of sleep_us *
+ ****************************************************************************
+ * CMD_CLOCK_SLEEP_MS: *
+ * *
+ * OUT: *
+ * offset 1: low byte of sleep_ms *
+ * offset 2: high byte of sleep_ms *
+ ****************************************************************************
+ * CMD_GET_SIGNALS: *
+ * *
+ * IN: *
+ * offset 0: current state of input signals *
+ * offset 1: current state of output signals *
+ ****************************************************************************
+ * CMD_SET_SIGNALS: *
+ * *
+ * OUT: *
+ * offset 1: signals that should be de-asserted *
+ * offset 2: signals that should be asserted *
+ ****************************************************************************
+ * CMD_CONFIGURE_TCK_FREQ: *
+ * *
+ * OUT: *
+ * offset 1: delay value for scan_in function *
+ * offset 2: delay value for scan_out function *
+ * offset 3: delay value for scan_io function *
+ * offset 4: delay value for clock_tck function *
+ * offset 5: delay value for clock_tms function *
+ ****************************************************************************
+ * CMD_SET_LEDS: *
+ * *
+ * OUT: *
+ * offset 1: LED states: *
+ * Bit 0: turn COM LED on *
+ * Bit 1: turn RUN LED on *
+ * Bit 2: turn COM LED off *
+ * Bit 3: turn RUN LED off *
+ * Bits 7..4: Reserved *
+ ****************************************************************************
+ * CMD_TEST: *
+ * *
+ * OUT: *
+ * offset 1: unused dummy value *
+ ****************************************************************************
+ */
+
+#ifndef __MSGTYPES_H
+#define __MSGTYPES_H
+
+/*
+ * Command IDs:
+ *
+ * Bits 7..6: Reserved, should always be zero
+ * Bits 5..0: Command ID. There are 62 usable IDs. Of this 63 available IDs,
+ * the IDs 0x00..0x1F are commands with variable payload size,
+ * the IDs 0x20..0x3F are commands with fixed payload size.
+ */
+
+#define CMD_ID_MASK 0x3F
+
+/* Commands with variable payload size */
+#define CMD_SCAN_IN 0x00
+#define CMD_SLOW_SCAN_IN 0x01
+#define CMD_SCAN_OUT 0x02
+#define CMD_SLOW_SCAN_OUT 0x03
+#define CMD_SCAN_IO 0x04
+#define CMD_SLOW_SCAN_IO 0x05
+
+/* Commands with fixed payload size */
+#define CMD_CLOCK_TMS 0x20
+#define CMD_SLOW_CLOCK_TMS 0x21
+#define CMD_CLOCK_TCK 0x22
+#define CMD_SLOW_CLOCK_TCK 0x23
+#define CMD_SLEEP_US 0x24
+#define CMD_SLEEP_MS 0x25
+#define CMD_GET_SIGNALS 0x26
+#define CMD_SET_SIGNALS 0x27
+#define CMD_CONFIGURE_TCK_FREQ 0x28
+#define CMD_SET_LEDS 0x29
+#define CMD_TEST 0x2A
+
+/* JTAG signal definition for jtag_get_signals() -- Input signals! */
+#define SIGNAL_TDO (1<<0)
+#define SIGNAL_BRKOUT (1<<1)
+#define SIGNAL_TRAP (1<<2)
+#define SIGNAL_RTCK (1<<3)
+
+/* JTAG signal definition for jtag_get_signals() -- Output signals! */
+#define SIGNAL_TDI (1<<0)
+#define SIGNAL_TMS (1<<1)
+#define SIGNAL_TCK (1<<2)
+#define SIGNAL_TRST (1<<3)
+#define SIGNAL_BRKIN (1<<4)
+#define SIGNAL_RESET (1<<5)
+#define SIGNAL_OCDSE (1<<6)
+
+/* LED definitions for CMD_SET_LEDS and CMD_CLEAR_LEDS commands */
+#define COM_LED_ON (1<<0)
+#define RUN_LED_ON (1<<1)
+#define COM_LED_OFF (1<<2)
+#define RUN_LED_OFF (1<<3)
+
+#endif
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/protocol.h
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/protocol.h b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/protocol.h
new file mode 100755
index 0000000..fbc1996
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/protocol.h
@@ -0,0 +1,32 @@
+/***************************************************************************
+ * Copyright (C) 2011 by Martin Schmoelzer *
+ * <ma...@student.tuwien.ac.at> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ ***************************************************************************/
+
+#ifndef __PROTOCOL_H
+#define __PROTOCOL_H
+
+#include "common.h"
+#include <stdbool.h>
+
+void execute_set_led_command(void);
+
+bool execute_command(void);
+void command_loop(void);
+
+#endif
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/reg_ezusb.h
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/reg_ezusb.h b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/reg_ezusb.h
new file mode 100755
index 0000000..82f9451
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/reg_ezusb.h
@@ -0,0 +1,743 @@
+/***************************************************************************
+ * Copyright (C) 2011 by Martin Schmoelzer *
+ * <ma...@student.tuwien.ac.at> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ ***************************************************************************/
+
+#ifndef REG_EZUSB_H
+#define REG_EZUSB_H
+
+/**
+ * @file
+ * All information in this file was taken from the EZ-USB Technical
+ * Reference Manual, Cypress Semiconductor, 3901 North First Street
+ * San Jose, CA 95134 (www.cypress.com).
+ *
+ * The EZ-USB Technical Reference Manual is called "EZ-USB TRM" hereafter.
+ *
+ * The following bit name definitions differ from those in the EZ-USB TRM:
+ * - All lowercase characters in the EZ-USB TRM bit names have been converted
+ * to capitals (e. g. "WakeSRC" converted to "WAKESRC").
+ * - CPUCS: 8051RES is named "RES8051".
+ * - ISOCTL: Two MBZ ("Must Be Zero") bits are named "MBZ0" and "MBZ1".
+ * - I2CS: STOP and START bits are preceded by "I2C_"
+ * - INxCS, OUTxCS: the busy and stall bits are named "EPBSY" and "EPSTALL".
+ * - TOGCTL: EZ-USB TRM bit names are preceded by "TOG_".
+ */
+
+/* Compiler-specific definitions of SBIT, SFR, SFRX, ... macros */
+#include <mcs51/compiler.h>
+
+/* Bit vectors */
+#define bmBit0 0x01
+#define bmBit1 0x02
+#define bmBit2 0x04
+#define bmBit3 0x08
+#define bmBit4 0x10
+#define bmBit5 0x20
+#define bmBit6 0x40
+#define bmBit7 0x80
+
+/**************************************************************************
+ ************************ Special Function Registers **********************
+ ***************************************************************************/
+
+/* See EZ-USB TRM, pp. A-9 - A-10 */
+
+SFR(SP, 0x81);
+SFR(DPL0, 0x82);
+SFR(DPH0, 0x83);
+SFR(DPL1, 0x84);
+SFR(DPL2, 0x85);
+
+SFR(DPS, 0x86);
+#define SEL bmBit0
+/* Bit 1 read-only, always reads '0' */
+/* Bit 2 read-only, always reads '0' */
+/* Bit 3 read-only, always reads '0' */
+/* Bit 4 read-only, always reads '0' */
+/* Bit 5 read-only, always reads '0' */
+/* Bit 6 read-only, always reads '0' */
+/* Bit 7 read-only, always reads '0' */
+
+SFR(PCON, 0x87);
+#define IDLE bmBit0
+#define STOP bmBit1
+#define GF0 bmBit2
+#define GF1 bmBit3
+/* Bit 4 read-only, always reads '1' */
+/* Bit 5 read-only, always reads '1' */
+/* Bit 6 unused */
+#define SMOD0 bmBit7
+
+SFR(TCON, 0x88);
+SBIT(IT0, 0x88, 0);
+SBIT(IE0, 0x88, 1);
+SBIT(IT1, 0x88, 2);
+SBIT(IE1, 0x88, 3);
+SBIT(TR0, 0x88, 4);
+SBIT(TF0, 0x88, 5);
+SBIT(TR1, 0x88, 6);
+SBIT(TF1, 0x88, 7);
+
+SFR(TMOD, 0x89);
+/* Some bits in this register share the same name in the EZ-USB TRM. Therefore,
+ * we add a '0'/'1' to distinguish them */
+#define M00 bmBit0
+#define M01 bmBit1
+#define CT0 bmBit2
+#define GATE0 bmBit3
+#define M10 bmBit4
+#define M11 bmBit5
+#define CT1 bmBit6
+#define GATE1 bmBit7
+
+SFR(TL0, 0x8A);
+SFR(TL1, 0x8B);
+SFR(TH0, 0x8C);
+SFR(TH1, 0x8D);
+
+SFR(CKCON, 0x8E);
+#define MD0 bmBit0
+#define MD1 bmBit1
+#define MD2 bmBit2
+#define T0M bmBit3
+#define T1M bmBit4
+#define T2M bmBit5
+/* Bit 6 unused */
+/* Bit 7 unused */
+
+SFR(SPC_FNC, 0x8D);
+#define bmWRS bmBit0
+/* Bit 1 read-only, always reads '0' */
+/* Bit 2 read-only, always reads '0' */
+/* Bit 3 read-only, always reads '0' */
+/* Bit 4 read-only, always reads '0' */
+/* Bit 5 read-only, always reads '0' */
+/* Bit 6 read-only, always reads '0' */
+/* Bit 7 read-only, always reads '0' */
+
+SFR(EXIF, 0x91);
+/* Bit 0 read-only, always reads '0' */
+/* Bit 1 read-only, always reads '0' */
+/* Bit 2 read-only, always reads '0' */
+/* Bit 3 read-only, always reads '1' */
+#define USBINT bmBit4
+#define I2CINT bmBit5
+#define IE4 bmBit6
+#define IE5 bmBit7
+
+/* Definition of the _XPAGE register, according to SDCC Compiler User Guide,
+ * Version 3.0.1, Chapter 4, p. 61. Also see EZ-USB TRM, p. 2-4. */
+SFR(MPAGE, 0x92);
+SFR(_XPAGE, 0x92);
+
+SFR(SCON0, 0x98);
+SBIT(RI_0, 0x98, 0);
+SBIT(TI_0, 0x98, 1);
+SBIT(RB8_0, 0x98, 2);
+SBIT(TB8_0, 0x98, 3);
+SBIT(REN_0, 0x98, 4);
+SBIT(SM2_0, 0x98, 5);
+SBIT(SM1_0, 0x98, 6);
+SBIT(SM0_0, 0x98, 7);
+
+SFR(SBUF0, 0x99);
+
+SFR(IE, 0xA8);
+SBIT(EX0, 0xA8, 0);
+SBIT(ET0, 0xA8, 1);
+SBIT(EX1, 0xA8, 2);
+SBIT(ET1, 0xA8, 3);
+SBIT(ES0, 0xA8, 4);
+SBIT(ET2, 0xA8, 5);
+SBIT(ES1, 0xA8, 6);
+SBIT(EA, 0xA8, 7);
+
+SFR(IP, 0xB8);
+SBIT(PX0, 0xB8, 0);
+SBIT(PT0, 0xB8, 1);
+SBIT(PX1, 0xB8, 2);
+SBIT(PT1, 0xB8, 3);
+SBIT(PS0, 0xB8, 4);
+SBIT(PT2, 0xB8, 5);
+SBIT(PS1, 0xB8, 6);
+/* Bit 7 read-only, always reads '1' */
+
+SFR(SCON1, 0xC0);
+SBIT(RI_1, 0xC0, 0);
+SBIT(TI_1, 0xC0, 1);
+SBIT(RB8_1, 0xC0, 2);
+SBIT(TB8_1, 0xC0, 3);
+SBIT(REN_1, 0xC0, 4);
+SBIT(SM2_1, 0xC0, 5);
+SBIT(SM1_1, 0xC0, 6);
+SBIT(SM0_1, 0xC0, 7);
+
+SFR(SBUF1, 0xC1);
+
+SFR(T2CON, 0xC8);
+SBIT(CPRL2, 0xC8, 0);
+SBIT(CT2, 0xC8, 1);
+SBIT(TR2, 0xC8, 2);
+SBIT(EXEN2, 0xC8, 3);
+SBIT(TCLK, 0xC8, 4);
+SBIT(RCLK, 0xC8, 5);
+SBIT(EXF2, 0xC8, 6);
+SBIT(TF2, 0xC8, 7);
+
+SFR(RCAP2L, 0xCA);
+SFR(RCAP2H, 0xCB);
+SFR(TL2, 0xCC);
+SFR(TH2, 0xCD);
+
+SFR(PSW, 0xD0);
+SBIT(P, 0xD0, 0);
+SBIT(F1, 0xD0, 1);
+SBIT(OV, 0xD0, 2);
+SBIT(RS0, 0xD0, 3);
+SBIT(RS1, 0xD0, 4);
+SBIT(F0, 0xD0, 5);
+SBIT(AC, 0xD0, 6);
+SBIT(CY, 0xD0, 7);
+
+SFR(EICON, 0xD8);
+/* Bit 0 read-only, always reads '0' */
+/* Bit 1 read-only, always reads '0' */
+/* Bit 2 read-only, always reads '0' */
+SBIT(INT6, 0xD8, 3);
+SBIT(RESI, 0xD8, 4);
+SBIT(ERESI, 0xD8, 5);
+/* Bit 6 read-only, always reads '1' */
+SBIT(SMOD1, 0xD8, 7);
+
+SFR(ACC, 0xE0);
+
+SFR(EIE, 0xE8);
+SBIT(EUSB, 0xE8, 0);
+SBIT(EI2C, 0xE8, 1);
+SBIT(EX4, 0xE8, 2);
+SBIT(EX5, 0xE8, 3);
+SBIT(EWDI, 0xE8, 4);
+/* Bit 5 read-only, always reads '1' */
+/* Bit 6 read-only, always reads '1' */
+/* Bit 7 read-only, always reads '1' */
+
+SFR(B, 0xF0);
+
+SFR(EIP, 0xF8);
+SBIT(PUSB, 0xF8, 0);
+SBIT(PI2C, 0xF8, 1);
+SBIT(PX4, 0xF8, 2);
+SBIT(PX5, 0xF8, 3);
+SBIT(PX6, 0xF8, 4);
+/* Bit 5 read-only, always reads '1' */
+/* Bit 6 read-only, always reads '1' */
+/* Bit 7 read-only, always reads '1' */
+
+/**************************************************************************
+ ***************************** XDATA Registers ****************************
+ ***************************************************************************/
+
+/************************ Endpoint 0-7 Data Buffers ************************/
+SFRX(OUT7BUF[64], 0x7B40);
+SFRX(IN7BUF[64], 0x7B80);
+SFRX(OUT6BUF[64], 0x7BC0);
+SFRX(IN6BUF[64], 0x7C00);
+SFRX(OUT5BUF[64], 0x7C40);
+SFRX(IN5BUF[64], 0x7C80);
+SFRX(OUT4BUF[64], 0x7CC0);
+SFRX(IN4BUF[64], 0x7D00);
+SFRX(OUT3BUF[64], 0x7D40);
+SFRX(IN3BUF[64], 0x7D80);
+SFRX(OUT2BUF[64], 0x7DC0);
+SFRX(IN2BUF[64], 0x7E00);
+SFRX(OUT1BUF[64], 0x7E40);
+SFRX(IN1BUF[64], 0x7E80);
+SFRX(OUT0BUF[64], 0x7EC0);
+SFRX(IN0BUF[64], 0x7F00);
+/* 0x7F40 - 0x7F5F reserved */
+
+/**************************** Isochronous Data *****************************/
+SFRX(OUT8DATA, 0x7F60);
+SFRX(OUT9DATA, 0x7F61);
+SFRX(OUT10DATA, 0x7F62);
+SFRX(OUT11DATA, 0x7F63);
+SFRX(OUT12DATA, 0x7F64);
+SFRX(OUT13DATA, 0x7F65);
+SFRX(OUT14DATA, 0x7F66);
+SFRX(OUT15DATA, 0x7F67);
+
+SFRX(IN8DATA, 0x7F68);
+SFRX(IN9DATA, 0x7F69);
+SFRX(IN10DATA, 0x7F6A);
+SFRX(IN11DATA, 0x7F6B);
+SFRX(IN12DATA, 0x7F6C);
+SFRX(IN13DATA, 0x7F6D);
+SFRX(IN14DATA, 0x7F6E);
+SFRX(IN15DATA, 0x7F6F);
+
+/************************* Isochronous Byte Counts *************************/
+SFRX(OUT8BCH, 0x7F70);
+SFRX(OUT8BCL, 0x7F71);
+SFRX(OUT9BCH, 0x7F72);
+SFRX(OUT9BCL, 0x7F73);
+SFRX(OUT10BCH, 0x7F74);
+SFRX(OUT10BCL, 0x7F75);
+SFRX(OUT11BCH, 0x7F76);
+SFRX(OUT11BCL, 0x7F77);
+SFRX(OUT12BCH, 0x7F78);
+SFRX(OUT12BCL, 0x7F79);
+SFRX(OUT13BCH, 0x7F7A);
+SFRX(OUT13BCL, 0x7F7B);
+SFRX(OUT14BCH, 0x7F7C);
+SFRX(OUT14BCL, 0x7F7D);
+SFRX(OUT15BCH, 0x7F7E);
+SFRX(OUT16BCL, 0x7F7F);
+
+/****************************** CPU Registers ******************************/
+SFRX(CPUCS, 0x7F92);
+#define RES8051 bmBit0
+#define CLK24OE bmBit1
+/* Bit 2 read-only, always reads '0' */
+/* Bit 3 read-only, always reads '0' */
+/* Bits 4...7: Chip Revision */
+
+SFRX(PORTACFG, 0x7F93);
+#define T0OUT bmBit0
+#define T1OUT bmBit1
+#define OE bmBit2
+#define CS bmBit3
+#define FWR bmBit4
+#define FRD bmBit5
+#define RXD0OUT bmBit6
+#define RXD1OUT bmBit7
+
+SFRX(PORTBCFG, 0x7F94);
+#define T2 bmBit0
+#define T2EX bmBit1
+#define RXD1 bmBit2
+#define TXD1 bmBit3
+#define INT4 bmBit4
+#define INT5 bmBit5
+#define INT6 bmBit6
+#define T2OUT bmBit7
+
+SFRX(PORTCCFG, 0x7F95);
+#define RXD0 bmBit0
+#define TXD0 bmBit1
+#define INT0 bmBit2
+#define INT1 bmBit3
+#define T0 bmBit4
+#define T1 bmBit5
+#define WR bmBit6
+#define RD bmBit7
+
+/*********************** Input-Output Port Registers ***********************/
+SFRX(OUTA, 0x7F96);
+#define OUTA0 bmBit0
+#define OUTA1 bmBit1
+#define OUTA2 bmBit2
+#define OUTA3 bmBit3
+#define OUTA4 bmBit4
+#define OUTA5 bmBit5
+#define OUTA6 bmBit6
+#define OUTA7 bmBit7
+
+SFRX(OUTB, 0x7F97);
+#define OUTB0 bmBit0
+#define OUTB1 bmBit1
+#define OUTB2 bmBit2
+#define OUTB3 bmBit3
+#define OUTB4 bmBit4
+#define OUTB5 bmBit5
+#define OUTB6 bmBit6
+#define OUTB7 bmBit7
+
+SFRX(OUTC, 0x7F98);
+#define OUTC0 bmBit0
+#define OUTC1 bmBit1
+#define OUTC2 bmBit2
+#define OUTC3 bmBit3
+#define OUTC4 bmBit4
+#define OUTC5 bmBit5
+#define OUTC6 bmBit6
+#define OUTC7 bmBit7
+
+SFRX(PINSA, 0x7F99);
+#define PINA0 bmBit0
+#define PINA1 bmBit1
+#define PINA2 bmBit2
+#define PINA3 bmBit3
+#define PINA4 bmBit4
+#define PINA5 bmBit5
+#define PINA6 bmBit6
+#define PINA7 bmBit7
+
+SFRX(PINSB, 0x7F9A);
+#define PINB0 bmBit0
+#define PINB1 bmBit1
+#define PINB2 bmBit2
+#define PINB3 bmBit3
+#define PINB4 bmBit4
+#define PINB5 bmBit5
+#define PINB6 bmBit6
+#define PINB7 bmBit7
+
+SFRX(PINSC, 0x7F9B);
+#define PINC0 bmBit0
+#define PINC1 bmBit1
+#define PINC2 bmBit2
+#define PINC3 bmBit3
+#define PINC4 bmBit4
+#define PINC5 bmBit5
+#define PINC6 bmBit6
+#define PINC7 bmBit7
+
+SFRX(OEA, 0x7F9C);
+#define OEA0 bmBit0
+#define OEA1 bmBit1
+#define OEA2 bmBit2
+#define OEA3 bmBit3
+#define OEA4 bmBit4
+#define OEA5 bmBit5
+#define OEA6 bmBit6
+#define OEA7 bmBit7
+
+SFRX(OEB, 0x7F9D);
+#define OEB0 bmBit0
+#define OEB1 bmBit1
+#define OEB2 bmBit2
+#define OEB3 bmBit3
+#define OEB4 bmBit4
+#define OEB5 bmBit5
+#define OEB6 bmBit6
+#define OEB7 bmBit7
+
+SFRX(OEC, 0x7F9E);
+#define OEC0 bmBit0
+#define OEC1 bmBit1
+#define OEC2 bmBit2
+#define OEC3 bmBit3
+#define OEC4 bmBit4
+#define OEC5 bmBit5
+#define OEC6 bmBit6
+#define OEC7 bmBit7
+
+/* 0x7F9F reserved */
+
+/****************** Isochronous Control/Status Registers *******************/
+SFRX(ISOERR, 0x7FA0);
+#define ISO8ERR bmBit0
+#define ISO9ERR bmBit1
+#define ISO10ERR bmBit2
+#define ISO11ERR bmBit3
+#define ISO12ERR bmBit4
+#define ISO13ERR bmBit5
+#define ISO14ERR bmBit6
+#define ISO15ERR bmBit7
+
+SFRX(ISOCTL, 0x7FA1);
+#define ISODISAB bmBit0
+#define MBZ0 bmBit1
+#define MBZ1 bmBit2
+#define PPSTAT bmBit3
+/* Bit 4 unused */
+/* Bit 5 unused */
+/* Bit 6 unused */
+/* Bit 7 unused */
+
+SFRX(ZBCOUT, 0x7FA2);
+#define EP8 bmBit0
+#define EP9 bmBit1
+#define EP10 bmBit2
+#define EP11 bmBit3
+#define EP12 bmBit4
+#define EP13 bmBit5
+#define EP14 bmBit6
+#define EP15 bmBit7
+
+/* 0x7FA3 reserved */
+/* 0x7FA4 reserved */
+
+/****************************** I2C Registers ******************************/
+SFRX(I2CS, 0x7FA5);
+#define DONE bmBit0
+#define ACK bmBit1
+#define BERR bmBit2
+#define ID0 bmBit3
+#define ID1 bmBit4
+#define LASTRD bmBit5
+#define I2C_STOP bmBit6
+#define I2C_START bmBit7
+
+SFRX(I2DAT, 0x7FA6);
+/* 0x7FA7 reserved */
+
+/******************************* Interrupts ********************************/
+SFRX(IVEC, 0x7FA8);
+/* Bit 0 read-only, always reads '0' */
+/* Bit 1 read-only, always reads '0' */
+#define IV0 bmBit2
+#define IV1 bmBit3
+#define IV2 bmBit4
+#define IV3 bmBit5
+#define IV4 bmBit6
+/* Bit 7 read-only, always reads '0' */
+
+SFRX(IN07IRQ, 0x7FA9);
+#define IN0IR bmBit0
+#define IN1IR bmBit1
+#define IN2IR bmBit2
+#define IN3IR bmBit3
+#define IN4IR bmBit4
+#define IN5IR bmBit5
+#define IN6IR bmBit6
+#define IN7IR bmBit7
+
+SFRX(OUT07IRQ, 0x7FAA);
+#define OUT0IR bmBit0
+#define OUT1IR bmBit1
+#define OUT2IR bmBit2
+#define OUT3IR bmBit3
+#define OUT4IR bmBit4
+#define OUT5IR bmBit5
+#define OUT6IR bmBit6
+#define OUT7IR bmBit7
+
+SFRX(USBIRQ, 0x7FAB);
+#define SUDAVIR bmBit0
+#define SOFIR bmBit1
+#define SUTOKIR bmBit2
+#define SUSPIR bmBit3
+#define URESIR bmBit4
+/* Bit 5 unused */
+/* Bit 6 unused */
+/* Bit 7 unused */
+
+SFRX(IN07IEN, 0x7FAC);
+#define IN0IEN bmBit0
+#define IN1IEN bmBit1
+#define IN2IEN bmBit2
+#define IN3IEN bmBit3
+#define IN4IEN bmBit4
+#define IN5IEN bmBit5
+#define IN6IEN bmBit6
+#define IN7IEN bmBit7
+
+SFRX(OUT07IEN, 0x7FAD);
+#define OUT0IEN bmBit0
+#define OUT1IEN bmBit1
+#define OUT2IEN bmBit2
+#define OUT3IEN bmBit3
+#define OUT4IEN bmBit4
+#define OUT5IEN bmBit5
+#define OUT6IEN bmBit6
+#define OUT7IEN bmBit7
+
+SFRX(USBIEN, 0x7FAE);
+#define SUDAVIE bmBit0
+#define SOFIE bmBit1
+#define SUTOKIE bmBit2
+#define SUSPIE bmBit3
+#define URESIE bmBit4
+/* Bit 5 unused */
+/* Bit 6 unused */
+/* Bit 7 unused */
+
+SFRX(USBBAV, 0x7FAF);
+#define AVEN bmBit0
+#define BPEN bmBit1
+#define BPPULSE bmBit2
+#define BREAK bmBit3
+/* Bit 4 unused */
+/* Bit 5 unused */
+/* Bit 6 unused */
+/* Bit 7 unused */
+
+/* 0x7FB0 reserved */
+/* 0x7FB1 reserved */
+SFRX(BPADDRH, 0x7FB2);
+SFRX(BPADDRL, 0x7FB3);
+
+/****************************** Endpoints 0-7 ******************************/
+SFRX(EP0CS, 0x7FB4);
+#define EP0STALL bmBit0
+#define HSNAK bmBit1
+#define IN0BSY bmBit2
+#define OUT0BSY bmBit3
+/* Bit 4 unused */
+/* Bit 5 unused */
+/* Bit 6 unused */
+/* Bit 7 unused */
+
+SFRX(IN0BC, 0x7FB5);
+SFRX(IN1CS, 0x7FB6);
+SFRX(IN1BC, 0x7FB7);
+SFRX(IN2CS, 0x7FB8);
+SFRX(IN2BC, 0x7FB9);
+SFRX(IN3CS, 0x7FBA);
+SFRX(IN3BC, 0x7FBB);
+SFRX(IN4CS, 0x7FBC);
+SFRX(IN4BC, 0x7FBD);
+SFRX(IN5CS, 0x7FBE);
+SFRX(IN5BC, 0x7FBF);
+SFRX(IN6CS, 0x7FC0);
+SFRX(IN6BC, 0x7FC1);
+SFRX(IN7CS, 0x7FC2);
+SFRX(IN7BC, 0x7FC3);
+/* 0x7FC4 reserved */
+SFRX(OUT0BC, 0x7FC5);
+SFRX(OUT1CS, 0x7FC6);
+SFRX(OUT1BC, 0x7FC7);
+SFRX(OUT2CS, 0x7FC8);
+SFRX(OUT2BC, 0x7FC9);
+SFRX(OUT3CS, 0x7FCA);
+SFRX(OUT3BC, 0x7FCB);
+SFRX(OUT4CS, 0x7FCC);
+SFRX(OUT4BC, 0x7FCD);
+SFRX(OUT5CS, 0x7FCE);
+SFRX(OUT5BC, 0x7FCF);
+SFRX(OUT6CS, 0x7FD0);
+SFRX(OUT6BC, 0x7FD1);
+SFRX(OUT7CS, 0x7FD2);
+SFRX(OUT7BC, 0x7FD3);
+
+/* The INxSTALL, OUTxSTALL, INxBSY and OUTxBSY bits are the same for all
+ * INxCS/OUTxCS registers. For better readability, we define them only once */
+#define EPSTALL bmBit0
+#define EPBSY bmBit1
+
+/************************** Global USB Registers ***************************/
+SFRX(SUDPTRH, 0x7FD4);
+SFRX(SUDPTRL, 0x7FD5);
+
+SFRX(USBCS, 0x7FD6);
+#define SIGRSUME bmBit0
+#define RENUM bmBit1
+#define DISCOE bmBit2
+#define DISCON bmBit3
+/* Bit 4 unused */
+/* Bit 5 unused */
+/* Bit 6 unused */
+#define WAKESRC bmBit7
+
+SFRX(TOGCTL, 0x7FD7);
+#define TOG_EP0 bmBit0
+#define TOG_EP1 bmBit1
+#define TOG_EP2 bmBit2
+/* Bit 3 is read-only, always reads '0' */
+#define TOG_IO bmBit4
+#define TOG_R bmBit5
+#define TOG_S bmBit6
+#define TOG_Q bmBit7
+
+SFRX(USBFRAMEL, 0x7FD8);
+SFRX(USBFRAMEH, 0x7FD9);
+/* 0x7FDA reserved */
+SFRX(FNADDR, 0x7FDB);
+/* 0x7FDC reserved */
+
+SFRX(USBPAIR, 0x7FDD);
+#define PR2IN bmBit0
+#define PR4IN bmBit1
+#define PR6IN bmBit2
+#define PR2OUT bmBit3
+#define PR4OUT bmBit4
+#define PR6OUT bmBit5
+/* Bit 6 unused */
+#define ISOSEND0 bmBit7
+
+SFRX(IN07VAL, 0x7FDE);
+/* Bit 0 is read-only, always reads '1' */
+#define IN1VAL bmBit1
+#define IN2VAL bmBit2
+#define IN3VAL bmBit3
+#define IN4VAL bmBit4
+#define IN5VAL bmBit5
+#define IN6VAL bmBit6
+#define IN7VAL bmBit7
+
+SFRX(OUT07VAL, 0x7FDF);
+/* Bit 0 is read-only, always reads '1' */
+#define OUT1VAL bmBit1
+#define OUT2VAL bmBit2
+#define OUT3VAL bmBit3
+#define OUT4VAL bmBit4
+#define OUT5VAL bmBit5
+#define OUT6VAL bmBit6
+#define OUT7VAL bmBit7
+
+SFRX(INISOVAL, 0x7FE0);
+#define IN8VAL bmBit0
+#define IN9VAL bmBit1
+#define IN10VAL bmBit2
+#define IN11VAL bmBit3
+#define IN12VAL bmBit4
+#define IN13VAL bmBit5
+#define IN14VAL bmBit6
+#define IN15VAL bmBit7
+
+SFRX(OUTISOVAL, 0x7FE1);
+#define OUT8VAL bmBit0
+#define OUT9VAL bmBit1
+#define OUT10VAL bmBit2
+#define OUT11VAL bmBit3
+#define OUT12VAL bmBit4
+#define OUT13VAL bmBit5
+#define OUT14VAL bmBit6
+#define OUT15VAL bmBit7
+
+SFRX(FASTXFR, 0x7FE2);
+#define WMOD0 bmBit0
+#define WMOD1 bmBit1
+#define WPOL bmBit2
+#define RMOD0 bmBit3
+#define RMOD1 bmBit4
+#define RPOL bmBit5
+#define FBLK bmBit6
+#define FISO bmBit7
+
+SFRX(AUTOPTRH, 0x7FE3);
+SFRX(AUTOPTRL, 0x7FE4);
+SFRX(AUTODATA, 0x7FE5);
+/* 0x7FE6 reserved */
+/* 0x7FE7 reserved */
+
+/******************************* Setup Data ********************************/
+SFRX(SETUPDAT[8], 0x7FE8);
+
+/************************* Isochronous FIFO sizes **************************/
+SFRX(OUT8ADDR, 0x7FF0);
+SFRX(OUT9ADDR, 0x7FF1);
+SFRX(OUT10ADDR, 0x7FF2);
+SFRX(OUT11ADDR, 0x7FF3);
+SFRX(OUT12ADDR, 0x7FF4);
+SFRX(OUT13ADDR, 0x7FF5);
+SFRX(OUT14ADDR, 0x7FF6);
+SFRX(OUT15ADDR, 0x7FF7);
+
+SFRX(IN8ADDR, 0x7FF8);
+SFRX(IN9ADDR, 0x7FF9);
+SFRX(IN10ADDR, 0x7FFA);
+SFRX(IN11ADDR, 0x7FFB);
+SFRX(IN12ADDR, 0x7FFC);
+SFRX(IN13ADDR, 0x7FFD);
+SFRX(IN14ADDR, 0x7FFE);
+SFRX(IN15ADDR, 0x7FFF);
+
+#endif
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/usb.h
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/usb.h b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/usb.h
new file mode 100755
index 0000000..182b790
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/include/usb.h
@@ -0,0 +1,267 @@
+/***************************************************************************
+ * Copyright (C) 2011 by Martin Schmoelzer *
+ * <ma...@student.tuwien.ac.at> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ ***************************************************************************/
+
+#ifndef __USB_H
+#define __USB_H
+
+#include "reg_ezusb.h"
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#define NULL (void *)0;
+
+/* High and Low byte of a word (uint16_t) */
+#define HI8(word) (uint8_t)(((uint16_t)word >> 8) & 0xff)
+#define LO8(word) (uint8_t)((uint16_t)word & 0xff)
+
+/* Convenience functions */
+#define STALL_EP0() (EP0CS |= EP0STALL)
+#define CLEAR_IRQ() (EXIF &= ~USBINT)
+
+/*********** USB descriptors. See section 9.5 of the USB 1.1 spec **********/
+
+/* USB Descriptor Types. See USB 1.1 spec, page 187, table 9-5 */
+#define DESCRIPTOR_TYPE_DEVICE 0x01
+#define DESCRIPTOR_TYPE_CONFIGURATION 0x02
+#define DESCRIPTOR_TYPE_STRING 0x03
+#define DESCRIPTOR_TYPE_INTERFACE 0x04
+#define DESCRIPTOR_TYPE_ENDPOINT 0x05
+
+#define STR_DESCR(len, ...) { len * 2 + 2, DESCRIPTOR_TYPE_STRING, { __VA_ARGS__ } }
+
+/** USB Device Descriptor. See USB 1.1 spec, pp. 196 - 198 */
+struct usb_device_descriptor {
+ uint8_t bLength; /**< Size of this descriptor in bytes. */
+ uint8_t bDescriptorType; /**< DEVICE Descriptor Type. */
+ uint16_t bcdUSB; /**< USB specification release number (BCD). */
+ uint8_t bDeviceClass; /**< Class code. */
+ uint8_t bDeviceSubClass; /**< Subclass code. */
+ uint8_t bDeviceProtocol; /**< Protocol code. */
+ uint8_t bMaxPacketSize0; /**< Maximum packet size for EP0 (8, 16, 32, 64). */
+ uint16_t idVendor; /**< USB Vendor ID. */
+ uint16_t idProduct; /**< USB Product ID. */
+ uint16_t bcdDevice; /**< Device Release Number (BCD). */
+ uint8_t iManufacturer; /**< Index of manufacturer string descriptor. */
+ uint8_t iProduct; /**< Index of product string descriptor. */
+ uint8_t iSerialNumber; /**< Index of string descriptor containing serial #. */
+ uint8_t bNumConfigurations; /**< Number of possible configurations. */
+};
+
+/** USB Configuration Descriptor. See USB 1.1 spec, pp. 199 - 200 */
+struct usb_config_descriptor {
+ uint8_t bLength; /**< Size of this descriptor in bytes. */
+ uint8_t bDescriptorType; /**< CONFIGURATION descriptor type. */
+ uint16_t wTotalLength; /**< Combined total length of all descriptors. */
+ uint8_t bNumInterfaces; /**< Number of interfaces in this configuration. */
+ uint8_t bConfigurationValue; /**< Value used to select this configuration. */
+ uint8_t iConfiguration; /**< Index of configuration string descriptor. */
+ uint8_t bmAttributes; /**< Configuration characteristics. */
+ uint8_t MaxPower; /**< Maximum power consumption in 2 mA units. */
+};
+
+/** USB Interface Descriptor. See USB 1.1 spec, pp. 201 - 203 */
+struct usb_interface_descriptor {
+ uint8_t bLength; /**< Size of this descriptor in bytes. */
+ uint8_t bDescriptorType; /**< INTERFACE descriptor type. */
+ uint8_t bInterfaceNumber; /**< Interface number. */
+ uint8_t bAlternateSetting; /**< Value used to select alternate setting. */
+ uint8_t bNumEndpoints; /**< Number of endpoints used by this interface. */
+ uint8_t bInterfaceClass; /**< Class code. */
+ uint8_t bInterfaceSubclass; /**< Subclass code. */
+ uint8_t bInterfaceProtocol; /**< Protocol code. */
+ uint8_t iInterface; /**< Index of interface string descriptor. */
+};
+
+/** USB Endpoint Descriptor. See USB 1.1 spec, pp. 203 - 204 */
+struct usb_endpoint_descriptor {
+ uint8_t bLength; /**< Size of this descriptor in bytes. */
+ uint8_t bDescriptorType; /**< ENDPOINT descriptor type. */
+ uint8_t bEndpointAddress; /**< Endpoint Address: USB 1.1 spec, table 9-10. */
+ uint8_t bmAttributes; /**< Endpoint Attributes: USB 1.1 spec, table 9-10. */
+ uint16_t wMaxPacketSize; /**< Maximum packet size for this endpoint. */
+ uint8_t bInterval; /**< Polling interval (in ms) for this endpoint. */
+};
+
+/** USB Language Descriptor. See USB 1.1 spec, pp. 204 - 205 */
+struct usb_language_descriptor {
+ uint8_t bLength; /**< Size of this descriptor in bytes. */
+ uint8_t bDescriptorType; /**< STRING descriptor type. */
+ uint16_t wLANGID[]; /**< LANGID codes. */
+};
+
+/** USB String Descriptor. See USB 1.1 spec, pp. 204 - 205 */
+struct usb_string_descriptor {
+ uint8_t bLength; /**< Size of this descriptor in bytes. */
+ uint8_t bDescriptorType; /**< STRING descriptor type. */
+ uint16_t bString[]; /**< UNICODE encoded string. */
+};
+
+/********************** USB Control Endpoint 0 related *********************/
+
+/** USB Control Setup Data. See USB 1.1 spec, pp. 183 - 185 */
+struct setup_data {
+ uint8_t bmRequestType; /**< Characteristics of a request. */
+ uint8_t bRequest; /**< Specific request. */
+ uint16_t wValue; /**< Field that varies according to request. */
+ uint16_t wIndex; /**< Field that varies according to request. */
+ uint16_t wLength; /**< Number of bytes to transfer in data stage. */
+};
+
+/* External declarations for variables that need to be accessed outside of
+ * the USB module */
+extern volatile bool EP2_out;
+extern volatile bool EP2_in;
+extern volatile __xdata __at 0x7FE8 struct setup_data setup_data;
+
+/*
+ * USB Request Types (bmRequestType): See USB 1.1 spec, page 183, table 9-2
+ *
+ * Bit 7: Data transfer direction
+ * 0 = Host-to-device
+ * 1 = Device-to-host
+ * Bit 6...5: Type
+ * 0 = Standard
+ * 1 = Class
+ * 2 = Vendor
+ * 3 = Reserved
+ * Bit 4...0: Recipient
+ * 0 = Device
+ * 1 = Interface
+ * 2 = Endpoint
+ * 3 = Other
+ * 4...31 = Reserved
+ */
+
+#define USB_DIR_OUT 0x00
+#define USB_DIR_IN 0x80
+
+#define USB_REQ_TYPE_STANDARD (0x00 << 5)
+#define USB_REQ_TYPE_CLASS (0x01 << 5)
+#define USB_REQ_TYPE_VENDOR (0x02 << 5)
+#define USB_REQ_TYPE_RESERVED (0x03 << 5)
+
+#define USB_RECIP_DEVICE 0x00
+#define USB_RECIP_INTERFACE 0x01
+#define USB_RECIP_ENDPOINT 0x02
+#define USB_RECIP_OTHER 0x03
+
+/* bmRequestType for USB Standard Requests */
+
+/* Clear Interface Request */
+#define CF_DEVICE (USB_DIR_OUT | USB_REQ_TYPE_STANDARD | USB_RECIP_DEVICE)
+#define CF_INTERFACE (USB_DIR_OUT | USB_REQ_TYPE_STANDARD | USB_RECIP_INTERFACE)
+#define CF_ENDPOINT (USB_DIR_OUT | USB_REQ_TYPE_STANDARD | USB_RECIP_ENDPOINT)
+
+/* Get Configuration Request */
+#define GC_DEVICE (USB_DIR_IN | USB_REQ_TYPE_STANDARD | USB_RECIP_DEVICE)
+
+/* Get Descriptor Request */
+#define GD_DEVICE (USB_DIR_IN | USB_REQ_TYPE_STANDARD | USB_RECIP_DEVICE)
+
+/* Get Interface Request */
+#define GI_INTERFACE (USB_DIR_IN | USB_REQ_TYPE_STANDARD | USB_RECIP_INTERFACE)
+
+/* Get Status Request: See USB 1.1 spec, page 190 */
+#define GS_DEVICE (USB_DIR_IN | USB_REQ_TYPE_STANDARD | USB_RECIP_DEVICE)
+#define GS_INTERFACE (USB_DIR_IN | USB_REQ_TYPE_STANDARD | USB_RECIP_INTERFACE)
+#define GS_ENDPOINT (USB_DIR_IN | USB_REQ_TYPE_STANDARD | USB_RECIP_ENDPOINT)
+
+/* Set Address Request is handled by EZ-USB core */
+
+/* Set Configuration Request */
+#define SC_DEVICE (USB_DIR_OUT | USB_REQ_TYPE_STANDARD | USB_RECIP_DEVICE)
+
+/* Set Descriptor Request */
+#define SD_DEVICE (USB_DIR_OUT | USB_REQ_TYPE_STANDARD | USB_RECIP_DEVICE)
+
+/* Set Feature Request */
+#define SF_DEVICE (USB_DIR_OUT | USB_REQ_TYPE_STANDARD | USB_RECIP_DEVICE)
+#define SF_INTERFACE (USB_DIR_OUT | USB_REQ_TYPE_STANDARD | USB_RECIP_INTERFACE)
+#define SF_ENDPOINT (USB_DIR_OUT | USB_REQ_TYPE_STANDARD | USB_RECIP_ENDPOINT)
+
+/* Set Interface Request */
+#define SI_INTERFACE (USB_DIR_OUT | USB_REQ_TYPE_STANDARD | USB_RECIP_INTERFACE)
+
+/* Synch Frame Request */
+#define SY_ENDPOINT (USB_DIR_IN | USB_REQ_TYPE_STANDARD | USB_RECIP_ENDPOINT)
+
+/* USB Requests (bRequest): See USB 1.1 spec, table 9-4 on page 187 */
+#define GET_STATUS 0
+#define CLEAR_FEATURE 1
+/* Value '2' is reserved for future use */
+#define SET_FEATURE 3
+/* Value '4' is reserved for future use */
+#define SET_ADDRESS 5
+#define GET_DESCRIPTOR 6
+#define SET_DESCRIPTOR 7
+#define GET_CONFIGURATION 8
+#define SET_CONFIGURATION 9
+#define GET_INTERFACE 10
+#define SET_INTERFACE 11
+#define SYNCH_FRAME 12
+
+/* Standard Feature Selectors: See USB 1.1 spec, table 9-6 on page 188 */
+#define DEVICE_REMOTE_WAKEUP 1
+#define ENDPOINT_HALT 0
+
+/************************** EZ-USB specific stuff **************************/
+
+/** USB Interrupts. See AN2131-TRM, page 9-4 for details */
+enum usb_isr {
+ SUDAV_ISR = 13,
+ SOF_ISR,
+ SUTOK_ISR,
+ SUSPEND_ISR,
+ USBRESET_ISR,
+ IBN_ISR,
+ EP0IN_ISR,
+ EP0OUT_ISR,
+ EP1IN_ISR,
+ EP1OUT_ISR,
+ EP2IN_ISR,
+ EP2OUT_ISR,
+ EP3IN_ISR,
+ EP3OUT_ISR,
+ EP4IN_ISR,
+ EP4OUT_ISR,
+ EP5IN_ISR,
+ EP5OUT_ISR,
+ EP6IN_ISR,
+ EP6OUT_ISR,
+ EP7IN_ISR,
+ EP7OUT_ISR
+};
+
+/*************************** Function Prototypes ***************************/
+
+__xdata uint8_t *usb_get_endpoint_cs_reg(uint8_t ep);
+void usb_reset_data_toggle(uint8_t ep);
+
+bool usb_handle_get_status(void);
+bool usb_handle_clear_feature(void);
+bool usb_handle_set_feature(void);
+bool usb_handle_get_descriptor(void);
+void usb_handle_set_interface(void);
+
+void usb_handle_setup_data(void);
+void usb_init(void);
+
+#endif
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/src/USBJmpTb.a51
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/src/USBJmpTb.a51 b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/src/USBJmpTb.a51
new file mode 100755
index 0000000..8ddd680
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/src/USBJmpTb.a51
@@ -0,0 +1,83 @@
+;--------------------------------------------------------------------------;
+; Copyright (C) 2011-2013 by Martin Schmoelzer ;
+; <ma...@student.tuwien.ac.at> ;
+; ;
+; This program is free software; you can redistribute it and/or modify ;
+; it under the terms of the GNU General Public License as published by ;
+; the Free Software Foundation; either version 2 of the License, or ;
+; (at your option) any later version. ;
+; ;
+; This program is distributed in the hope that it will be useful, ;
+; but WITHOUT ANY WARRANTY; without even the implied warranty of ;
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;
+; GNU General Public License for more details. ;
+; ;
+; You should have received a copy of the GNU General Public License ;
+; along with this program; if not, write to the ;
+; Free Software Foundation, Inc., ;
+; 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ;
+;--------------------------------------------------------------------------;
+
+.module JUMPTABLE
+.globl USB_AutoVector
+.globl USB_Jump_Table
+
+;--------------------------------------------------------------------------;
+; Interrupt Vectors ;
+;--------------------------------------------------------------------------;
+.area USB_JV (ABS,OVR) ; Absolute, Overlay
+.org 0x43 ; USB interrupt (INT2) jumps here
+USB_AutoVector = #. + 2
+ ljmp USB_Jump_Table
+
+;--------------------------------------------------------------------------;
+; USB Jump Table ;
+;--------------------------------------------------------------------------;
+.area USB_JT (ABS) ; Absolute placement
+.org 0x1B00 ; Place jump table at 0x1B00
+
+USB_Jump_Table: ; autovector jump table
+ ljmp _sudav_isr ; Setup Data Available
+ .db 0
+ ljmp _sof_isr ; Start of Frame
+ .db 0
+ ljmp _sutok_isr ; Setup Data Loading
+ .db 0
+ ljmp _suspend_isr ; Global Suspend
+ .db 0
+ ljmp _usbreset_isr ; USB Reset
+ .db 0
+ ljmp _ibn_isr ; IN Bulk NAK interrupt
+ .db 0
+ ljmp _ep0in_isr ; Endpoint 0 IN
+ .db 0
+ ljmp _ep0out_isr ; Endpoint 0 OUT
+ .db 0
+ ljmp _ep1in_isr ; Endpoint 1 IN
+ .db 0
+ ljmp _ep1out_isr ; Endpoint 1 OUT
+ .db 0
+ ljmp _ep2in_isr ; Endpoint 2 IN
+ .db 0
+ ljmp _ep2out_isr ; Endpoint 2 OUT
+ .db 0
+ ljmp _ep3in_isr ; Endpoint 3 IN
+ .db 0
+ ljmp _ep3out_isr ; Endpoint 3 OUT
+ .db 0
+ ljmp _ep4in_isr ; Endpoint 4 IN
+ .db 0
+ ljmp _ep4out_isr ; Endpoint 4 OUT
+ .db 0
+ ljmp _ep5in_isr ; Endpoint 5 IN
+ .db 0
+ ljmp _ep5out_isr ; Endpoint 5 OUT
+ .db 0
+ ljmp _ep6in_isr ; Endpoint 6 IN
+ .db 0
+ ljmp _ep6out_isr ; Endpoint 6 OUT
+ .db 0
+ ljmp _ep7in_isr ; Endpoint 7 IN
+ .db 0
+ ljmp _ep7out_isr ; Endpoint 7 OUT
+ .db 0
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-site/blob/e302582d/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/src/delay.c
----------------------------------------------------------------------
diff --git a/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/src/delay.c b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/src/delay.c
new file mode 100755
index 0000000..82569e2
--- /dev/null
+++ b/docs/os/tutorials/downloads/openocd-code-89bf96ffe6ac66c80407af8383b9d5adc0dc35f4/src/jtag/drivers/OpenULINK/src/delay.c
@@ -0,0 +1,51 @@
+/***************************************************************************
+ * Copyright (C) 2011 by Martin Schmoelzer *
+ * <ma...@student.tuwien.ac.at> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ ***************************************************************************/
+
+#include "delay.h"
+
+void delay_5us(void)
+{
+ NOP;
+}
+
+void delay_1ms(void)
+{
+ uint16_t i;
+
+ for (i = 0; i < 598; i++)
+ ;
+}
+
+void delay_us(uint16_t delay)
+{
+ uint16_t i;
+ uint16_t maxcount = (delay / 5);
+
+ for (i = 0; i < maxcount; i++)
+ delay_5us();
+}
+
+void delay_ms(uint16_t delay)
+{
+ uint16_t i;
+
+ for (i = 0; i < delay; i++)
+ delay_1ms();
+}