You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Bradley Hieber <me...@gmail.com> on 2013/07/16 19:40:05 UTC
NFS directories
Hello community,
The installation documentation for CS 4.1 says to use /export
*(rw,async,no_root_squash) for my options. I am having difficulties
mounting the /export/primary folder on my hypervisor as a test. Syslog is
reporting "permisison denied" on the hypervisor. The management server is
Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
assistance?
--
Brad
RE: NFS directories
Posted by Alramzana Nujum Navaz <ra...@uaeu.ac.ae>.
Hi,
I faced samed problem some time back.
Followed the steps here http://ostechnix.wordpress.com/2013/02/28/setup-nfs-server-in-centos-rhel-scientific-linux-6-3-step-by-step/ especially the one for the IP tables and the premission denied problem disappeared. Hope it helps.
Regards,
Ramzana
________________________________________
From: Bradley Hieber [mercsniper@gmail.com]
Sent: Wednesday, July 17, 2013 11:43 PM
To: users@cloudstack.apache.org
Subject: Re: NFS directories
http://pastebin.com/yGMJBA8M
Current Management log
On Wed, Jul 17, 2013 at 3:21 PM, Carlos Reategui <ca...@reategui.com>wrote:
> There may be a setting then in the nfs server that allows for that then, I
> created 2 exports 1 for primary and 1 for secondary. I also did that
> because I wanted separate spindles for both (i.e. separate raid 10).
>
>
> On Wed, Jul 17, 2013 at 12:11 PM, Bradley Hieber <mercsniper@gmail.com
> >wrote:
>
> > You see, and that is the odd thing. The documentation lists /export only
> > and then they expect it to work. I am finding that to be the opposite.
> >
> >
> > On Wed, Jul 17, 2013 at 3:09 PM, Carlos Reategui <carlos@reategui.com
> > >wrote:
> >
> > > I'm not an nfs expert but I believe you can only mount paths that have
> > been
> > > explicitly exported. Your export is /export not /export/primary.
> > >
> > >
> > > On Wed, Jul 17, 2013 at 11:59 AM, Bradley Hieber <mercsniper@gmail.com
> > > >wrote:
> > >
> > > > Jul 17 14:57:51 master rpc.mountd[31341]: authenticated mount request
> > > from
> > > > 192.168.2.114:840 for /export/primary (/export)
> > > > Jul 17 14:57:51 master rpc.mountd[31341]: request to export directory
> > > > /export/primary below nearest filesystem /export
> > > >
> > > >
> > > >
> > > > On Wed, Jul 17, 2013 at 2:47 PM, Bradley Hieber <
> mercsniper@gmail.com
> > > > >wrote:
> > > >
> > > > > [root@xenserver-01 ~]# showmount -e 192.168.2.123
> > > > > Export list for 192.168.2.123:
> > > > > /export *
> > > > > [root@xenserver-01 ~]# mount -t nfs 192.168.2.123:/export/primary
> > > > > /primarymount/
> > > > > mount: 192.168.2.123:/export/primary failed, reason given by
> server:
> > > > > Permission denied
> > > > > [root@xenserver-01 ~]#
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Jul 17, 2013 at 2:10 PM, Bradley Hieber <
> > mercsniper@gmail.com
> > > > >wrote:
> > > > >
> > > > >> Should that also happen if I list /export/ for /export/primary and
> > > > >> /export/secondary also? Then I am confused as to why I am getting
> > NFS
> > > > >> permission denied errors then.
> > > > >>
> > > > >>
> > > > >> On Wed, Jul 17, 2013 at 2:06 PM, Dean Kamali <
> dean.kamali@gmail.com
> > > > >wrote:
> > > > >>
> > > > >>> When you list /etc/primary in /etc/exports it will export all
> > content
> > > > of
> > > > >>> that folder, so you don't have to worry about sub-folders.
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>> On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <
> > > mercsniper@gmail.com
> > > > >>> >wrote:
> > > > >>>
> > > > >>> > I can mount /export but it keeps telling me permission denied
> > when
> > > I
> > > > >>> try to
> > > > >>> > mount /export/primary or /export/secondary. The only way I have
> > > been
> > > > >>> able
> > > > >>> > to stop it is manually listing /export/primary and
> > > > /export/secondary. I
> > > > >>> > can't manually list every folder though. That is why it is
> having
> > > > >>> issues
> > > > >>> > mounting /export/secondary/template/templ/1/1 to
> /var/run/cloud/
> > > > >>> Thoughts?
> > > > >>> >
> > > > >>> >
> > > > >>> > On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com>
> > wrote:
> > > > >>> >
> > > > >>> > > hi,
> > > > >>> > > so i think you can test it in your hypervisor host
> > > > >>> > >
> > > > >>> > > do it as root
> > > > >>> > >
> > > > >>> > > mount -t nfs 192.168.2.114:/export /mnt
> > > > >>> > >
> > > > >>> > > and tell us the result.
> > > > >>> > >
> > > > >>> > >
> > > > >>> > >
> > > > >>> > > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
> > > > >>> > >
> > > > >>> > >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
> > > > >>> > >> /export
> > > > >>> > >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
> > > > >>> > >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
> > > > >>> > >>
> > > > >>> > >>
> > > > >>> > >>
> > > > >>> > >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <
> > > > dean.kamali@gmail.com
> > > > >>> >
> > > > >>> > >> wrote:
> > > > >>> > >>
> > > > >>> > >> what is the permissions on /export ?
> > > > >>> > >>>
> > > > >>> > >>>
> > > > >>> > >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <
> > > > >>> mercsniper@gmail.com
> > > > >>> > >>>
> > > > >>> > >>>> wrote:
> > > > >>> > >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
> > > > >>> > >>>> Export list for 192.168.2.123:
> > > > >>> > >>>> /export 192.168.2.114
> > > > >>> > >>>>
> > > > >>> > >>>> Restarting the service did not do anything productive. I
> > > already
> > > > >>> did
> > > > >>> > an
> > > > >>> > >>>> exportfs -ra before.
> > > > >>> > >>>>
> > > > >>> > >>>>
> > > > >>> > >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <
> > > > >>> dean.kamali@gmail.com>
> > > > >>> > >>>> wrote:
> > > > >>> > >>>>
> > > > >>> > >>>> Did you restart nfs service after modifying /etc/export ?
> > > > >>> > >>>>>
> > > > >>> > >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
> > > > >>> > >>>>>
> > > > >>> > >>>>> what dose it show?
> > > > >>> > >>>>>
> > > > >>> > >>>>>
> > > > >>> > >>>>>
> > > > >>> > >>>>>
> > > > >>> > >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
> > > > >>> > mercsniper@gmail.com
> > > > >>> > >>>>>
> > > > >>> > >>>>>> wrote:
> > > > >>> > >>>>>> Hello community,
> > > > >>> > >>>>>>
> > > > >>> > >>>>>> The installation documentation for CS 4.1 says to use
> > > /export
> > > > >>> > >>>>>> *(rw,async,no_root_squash) for my options. I am having
> > > > >>> difficulties
> > > > >>> > >>>>>> mounting the /export/primary folder on my hypervisor as
> a
> > > > test.
> > > > >>> > >>>>>>
> > > > >>> > >>>>> Syslog
> > > > >>> > >>>
> > > > >>> > >>>> is
> > > > >>> > >>>>
> > > > >>> > >>>>> reporting "permisison denied" on the hypervisor. The
> > > management
> > > > >>> > >>>>>>
> > > > >>> > >>>>> server
> > > > >>> > >>>
> > > > >>> > >>>> is
> > > > >>> > >>>>
> > > > >>> > >>>>> Ubuntu 12.04.02 and the hard drives are attached and
> > mounted.
> > > > Any
> > > > >>> > >>>>>> assistance?
> > > > >>> > >>>>>>
> > > > >>> > >>>>>> --
> > > > >>> > >>>>>> Brad
> > > > >>> > >>>>>>
> > > > >>> > >>>>>>
> > > > >>> > >>>>
> > > > >>> > >>>> --
> > > > >>> > >>>> Brad
> > > > >>> > >>>>
> > > > >>> > >>>>
> > > > >>> > >>
> > > > >>> > >>
> > > > >>> > >
> > > > >>> > > --
> > > > >>> > > Thanks,
> > > > >>> > > Jijun
> > > > >>> > >
> > > > >>> > >
> > > > >>> >
> > > > >>> >
> > > > >>> > --
> > > > >>> > Brad
> > > > >>> >
> > > > >>>
> > > > >>
> > > > >>
> > > > >>
> > > > >> --
> > > > >> Brad
> > > > >>
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Brad
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Brad
> > > >
> > >
> >
> >
> >
> > --
> > Brad
> >
>
--
Brad
Re: NFS directories
Posted by Bradley Hieber <me...@gmail.com>.
http://pastebin.com/yGMJBA8M
Current Management log
On Wed, Jul 17, 2013 at 3:21 PM, Carlos Reategui <ca...@reategui.com>wrote:
> There may be a setting then in the nfs server that allows for that then, I
> created 2 exports 1 for primary and 1 for secondary. I also did that
> because I wanted separate spindles for both (i.e. separate raid 10).
>
>
> On Wed, Jul 17, 2013 at 12:11 PM, Bradley Hieber <mercsniper@gmail.com
> >wrote:
>
> > You see, and that is the odd thing. The documentation lists /export only
> > and then they expect it to work. I am finding that to be the opposite.
> >
> >
> > On Wed, Jul 17, 2013 at 3:09 PM, Carlos Reategui <carlos@reategui.com
> > >wrote:
> >
> > > I'm not an nfs expert but I believe you can only mount paths that have
> > been
> > > explicitly exported. Your export is /export not /export/primary.
> > >
> > >
> > > On Wed, Jul 17, 2013 at 11:59 AM, Bradley Hieber <mercsniper@gmail.com
> > > >wrote:
> > >
> > > > Jul 17 14:57:51 master rpc.mountd[31341]: authenticated mount request
> > > from
> > > > 192.168.2.114:840 for /export/primary (/export)
> > > > Jul 17 14:57:51 master rpc.mountd[31341]: request to export directory
> > > > /export/primary below nearest filesystem /export
> > > >
> > > >
> > > >
> > > > On Wed, Jul 17, 2013 at 2:47 PM, Bradley Hieber <
> mercsniper@gmail.com
> > > > >wrote:
> > > >
> > > > > [root@xenserver-01 ~]# showmount -e 192.168.2.123
> > > > > Export list for 192.168.2.123:
> > > > > /export *
> > > > > [root@xenserver-01 ~]# mount -t nfs 192.168.2.123:/export/primary
> > > > > /primarymount/
> > > > > mount: 192.168.2.123:/export/primary failed, reason given by
> server:
> > > > > Permission denied
> > > > > [root@xenserver-01 ~]#
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Jul 17, 2013 at 2:10 PM, Bradley Hieber <
> > mercsniper@gmail.com
> > > > >wrote:
> > > > >
> > > > >> Should that also happen if I list /export/ for /export/primary and
> > > > >> /export/secondary also? Then I am confused as to why I am getting
> > NFS
> > > > >> permission denied errors then.
> > > > >>
> > > > >>
> > > > >> On Wed, Jul 17, 2013 at 2:06 PM, Dean Kamali <
> dean.kamali@gmail.com
> > > > >wrote:
> > > > >>
> > > > >>> When you list /etc/primary in /etc/exports it will export all
> > content
> > > > of
> > > > >>> that folder, so you don't have to worry about sub-folders.
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>> On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <
> > > mercsniper@gmail.com
> > > > >>> >wrote:
> > > > >>>
> > > > >>> > I can mount /export but it keeps telling me permission denied
> > when
> > > I
> > > > >>> try to
> > > > >>> > mount /export/primary or /export/secondary. The only way I have
> > > been
> > > > >>> able
> > > > >>> > to stop it is manually listing /export/primary and
> > > > /export/secondary. I
> > > > >>> > can't manually list every folder though. That is why it is
> having
> > > > >>> issues
> > > > >>> > mounting /export/secondary/template/templ/1/1 to
> /var/run/cloud/
> > > > >>> Thoughts?
> > > > >>> >
> > > > >>> >
> > > > >>> > On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com>
> > wrote:
> > > > >>> >
> > > > >>> > > hi,
> > > > >>> > > so i think you can test it in your hypervisor host
> > > > >>> > >
> > > > >>> > > do it as root
> > > > >>> > >
> > > > >>> > > mount -t nfs 192.168.2.114:/export /mnt
> > > > >>> > >
> > > > >>> > > and tell us the result.
> > > > >>> > >
> > > > >>> > >
> > > > >>> > >
> > > > >>> > > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
> > > > >>> > >
> > > > >>> > >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
> > > > >>> > >> /export
> > > > >>> > >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
> > > > >>> > >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
> > > > >>> > >>
> > > > >>> > >>
> > > > >>> > >>
> > > > >>> > >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <
> > > > dean.kamali@gmail.com
> > > > >>> >
> > > > >>> > >> wrote:
> > > > >>> > >>
> > > > >>> > >> what is the permissions on /export ?
> > > > >>> > >>>
> > > > >>> > >>>
> > > > >>> > >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <
> > > > >>> mercsniper@gmail.com
> > > > >>> > >>>
> > > > >>> > >>>> wrote:
> > > > >>> > >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
> > > > >>> > >>>> Export list for 192.168.2.123:
> > > > >>> > >>>> /export 192.168.2.114
> > > > >>> > >>>>
> > > > >>> > >>>> Restarting the service did not do anything productive. I
> > > already
> > > > >>> did
> > > > >>> > an
> > > > >>> > >>>> exportfs -ra before.
> > > > >>> > >>>>
> > > > >>> > >>>>
> > > > >>> > >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <
> > > > >>> dean.kamali@gmail.com>
> > > > >>> > >>>> wrote:
> > > > >>> > >>>>
> > > > >>> > >>>> Did you restart nfs service after modifying /etc/export ?
> > > > >>> > >>>>>
> > > > >>> > >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
> > > > >>> > >>>>>
> > > > >>> > >>>>> what dose it show?
> > > > >>> > >>>>>
> > > > >>> > >>>>>
> > > > >>> > >>>>>
> > > > >>> > >>>>>
> > > > >>> > >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
> > > > >>> > mercsniper@gmail.com
> > > > >>> > >>>>>
> > > > >>> > >>>>>> wrote:
> > > > >>> > >>>>>> Hello community,
> > > > >>> > >>>>>>
> > > > >>> > >>>>>> The installation documentation for CS 4.1 says to use
> > > /export
> > > > >>> > >>>>>> *(rw,async,no_root_squash) for my options. I am having
> > > > >>> difficulties
> > > > >>> > >>>>>> mounting the /export/primary folder on my hypervisor as
> a
> > > > test.
> > > > >>> > >>>>>>
> > > > >>> > >>>>> Syslog
> > > > >>> > >>>
> > > > >>> > >>>> is
> > > > >>> > >>>>
> > > > >>> > >>>>> reporting "permisison denied" on the hypervisor. The
> > > management
> > > > >>> > >>>>>>
> > > > >>> > >>>>> server
> > > > >>> > >>>
> > > > >>> > >>>> is
> > > > >>> > >>>>
> > > > >>> > >>>>> Ubuntu 12.04.02 and the hard drives are attached and
> > mounted.
> > > > Any
> > > > >>> > >>>>>> assistance?
> > > > >>> > >>>>>>
> > > > >>> > >>>>>> --
> > > > >>> > >>>>>> Brad
> > > > >>> > >>>>>>
> > > > >>> > >>>>>>
> > > > >>> > >>>>
> > > > >>> > >>>> --
> > > > >>> > >>>> Brad
> > > > >>> > >>>>
> > > > >>> > >>>>
> > > > >>> > >>
> > > > >>> > >>
> > > > >>> > >
> > > > >>> > > --
> > > > >>> > > Thanks,
> > > > >>> > > Jijun
> > > > >>> > >
> > > > >>> > >
> > > > >>> >
> > > > >>> >
> > > > >>> > --
> > > > >>> > Brad
> > > > >>> >
> > > > >>>
> > > > >>
> > > > >>
> > > > >>
> > > > >> --
> > > > >> Brad
> > > > >>
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Brad
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Brad
> > > >
> > >
> >
> >
> >
> > --
> > Brad
> >
>
--
Brad
Re: NFS directories
Posted by Carlos Reategui <ca...@reategui.com>.
There may be a setting then in the nfs server that allows for that then, I
created 2 exports 1 for primary and 1 for secondary. I also did that
because I wanted separate spindles for both (i.e. separate raid 10).
On Wed, Jul 17, 2013 at 12:11 PM, Bradley Hieber <me...@gmail.com>wrote:
> You see, and that is the odd thing. The documentation lists /export only
> and then they expect it to work. I am finding that to be the opposite.
>
>
> On Wed, Jul 17, 2013 at 3:09 PM, Carlos Reategui <carlos@reategui.com
> >wrote:
>
> > I'm not an nfs expert but I believe you can only mount paths that have
> been
> > explicitly exported. Your export is /export not /export/primary.
> >
> >
> > On Wed, Jul 17, 2013 at 11:59 AM, Bradley Hieber <mercsniper@gmail.com
> > >wrote:
> >
> > > Jul 17 14:57:51 master rpc.mountd[31341]: authenticated mount request
> > from
> > > 192.168.2.114:840 for /export/primary (/export)
> > > Jul 17 14:57:51 master rpc.mountd[31341]: request to export directory
> > > /export/primary below nearest filesystem /export
> > >
> > >
> > >
> > > On Wed, Jul 17, 2013 at 2:47 PM, Bradley Hieber <mercsniper@gmail.com
> > > >wrote:
> > >
> > > > [root@xenserver-01 ~]# showmount -e 192.168.2.123
> > > > Export list for 192.168.2.123:
> > > > /export *
> > > > [root@xenserver-01 ~]# mount -t nfs 192.168.2.123:/export/primary
> > > > /primarymount/
> > > > mount: 192.168.2.123:/export/primary failed, reason given by server:
> > > > Permission denied
> > > > [root@xenserver-01 ~]#
> > > >
> > > >
> > > >
> > > > On Wed, Jul 17, 2013 at 2:10 PM, Bradley Hieber <
> mercsniper@gmail.com
> > > >wrote:
> > > >
> > > >> Should that also happen if I list /export/ for /export/primary and
> > > >> /export/secondary also? Then I am confused as to why I am getting
> NFS
> > > >> permission denied errors then.
> > > >>
> > > >>
> > > >> On Wed, Jul 17, 2013 at 2:06 PM, Dean Kamali <dean.kamali@gmail.com
> > > >wrote:
> > > >>
> > > >>> When you list /etc/primary in /etc/exports it will export all
> content
> > > of
> > > >>> that folder, so you don't have to worry about sub-folders.
> > > >>>
> > > >>>
> > > >>>
> > > >>>
> > > >>> On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <
> > mercsniper@gmail.com
> > > >>> >wrote:
> > > >>>
> > > >>> > I can mount /export but it keeps telling me permission denied
> when
> > I
> > > >>> try to
> > > >>> > mount /export/primary or /export/secondary. The only way I have
> > been
> > > >>> able
> > > >>> > to stop it is manually listing /export/primary and
> > > /export/secondary. I
> > > >>> > can't manually list every folder though. That is why it is having
> > > >>> issues
> > > >>> > mounting /export/secondary/template/templ/1/1 to /var/run/cloud/
> > > >>> Thoughts?
> > > >>> >
> > > >>> >
> > > >>> > On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com>
> wrote:
> > > >>> >
> > > >>> > > hi,
> > > >>> > > so i think you can test it in your hypervisor host
> > > >>> > >
> > > >>> > > do it as root
> > > >>> > >
> > > >>> > > mount -t nfs 192.168.2.114:/export /mnt
> > > >>> > >
> > > >>> > > and tell us the result.
> > > >>> > >
> > > >>> > >
> > > >>> > >
> > > >>> > > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
> > > >>> > >
> > > >>> > >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
> > > >>> > >> /export
> > > >>> > >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
> > > >>> > >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
> > > >>> > >>
> > > >>> > >>
> > > >>> > >>
> > > >>> > >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <
> > > dean.kamali@gmail.com
> > > >>> >
> > > >>> > >> wrote:
> > > >>> > >>
> > > >>> > >> what is the permissions on /export ?
> > > >>> > >>>
> > > >>> > >>>
> > > >>> > >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <
> > > >>> mercsniper@gmail.com
> > > >>> > >>>
> > > >>> > >>>> wrote:
> > > >>> > >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
> > > >>> > >>>> Export list for 192.168.2.123:
> > > >>> > >>>> /export 192.168.2.114
> > > >>> > >>>>
> > > >>> > >>>> Restarting the service did not do anything productive. I
> > already
> > > >>> did
> > > >>> > an
> > > >>> > >>>> exportfs -ra before.
> > > >>> > >>>>
> > > >>> > >>>>
> > > >>> > >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <
> > > >>> dean.kamali@gmail.com>
> > > >>> > >>>> wrote:
> > > >>> > >>>>
> > > >>> > >>>> Did you restart nfs service after modifying /etc/export ?
> > > >>> > >>>>>
> > > >>> > >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
> > > >>> > >>>>>
> > > >>> > >>>>> what dose it show?
> > > >>> > >>>>>
> > > >>> > >>>>>
> > > >>> > >>>>>
> > > >>> > >>>>>
> > > >>> > >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
> > > >>> > mercsniper@gmail.com
> > > >>> > >>>>>
> > > >>> > >>>>>> wrote:
> > > >>> > >>>>>> Hello community,
> > > >>> > >>>>>>
> > > >>> > >>>>>> The installation documentation for CS 4.1 says to use
> > /export
> > > >>> > >>>>>> *(rw,async,no_root_squash) for my options. I am having
> > > >>> difficulties
> > > >>> > >>>>>> mounting the /export/primary folder on my hypervisor as a
> > > test.
> > > >>> > >>>>>>
> > > >>> > >>>>> Syslog
> > > >>> > >>>
> > > >>> > >>>> is
> > > >>> > >>>>
> > > >>> > >>>>> reporting "permisison denied" on the hypervisor. The
> > management
> > > >>> > >>>>>>
> > > >>> > >>>>> server
> > > >>> > >>>
> > > >>> > >>>> is
> > > >>> > >>>>
> > > >>> > >>>>> Ubuntu 12.04.02 and the hard drives are attached and
> mounted.
> > > Any
> > > >>> > >>>>>> assistance?
> > > >>> > >>>>>>
> > > >>> > >>>>>> --
> > > >>> > >>>>>> Brad
> > > >>> > >>>>>>
> > > >>> > >>>>>>
> > > >>> > >>>>
> > > >>> > >>>> --
> > > >>> > >>>> Brad
> > > >>> > >>>>
> > > >>> > >>>>
> > > >>> > >>
> > > >>> > >>
> > > >>> > >
> > > >>> > > --
> > > >>> > > Thanks,
> > > >>> > > Jijun
> > > >>> > >
> > > >>> > >
> > > >>> >
> > > >>> >
> > > >>> > --
> > > >>> > Brad
> > > >>> >
> > > >>>
> > > >>
> > > >>
> > > >>
> > > >> --
> > > >> Brad
> > > >>
> > > >
> > > >
> > > >
> > > > --
> > > > Brad
> > > >
> > >
> > >
> > >
> > > --
> > > Brad
> > >
> >
>
>
>
> --
> Brad
>
Re: NFS directories
Posted by Bradley Hieber <me...@gmail.com>.
You see, and that is the odd thing. The documentation lists /export only
and then they expect it to work. I am finding that to be the opposite.
On Wed, Jul 17, 2013 at 3:09 PM, Carlos Reategui <ca...@reategui.com>wrote:
> I'm not an nfs expert but I believe you can only mount paths that have been
> explicitly exported. Your export is /export not /export/primary.
>
>
> On Wed, Jul 17, 2013 at 11:59 AM, Bradley Hieber <mercsniper@gmail.com
> >wrote:
>
> > Jul 17 14:57:51 master rpc.mountd[31341]: authenticated mount request
> from
> > 192.168.2.114:840 for /export/primary (/export)
> > Jul 17 14:57:51 master rpc.mountd[31341]: request to export directory
> > /export/primary below nearest filesystem /export
> >
> >
> >
> > On Wed, Jul 17, 2013 at 2:47 PM, Bradley Hieber <mercsniper@gmail.com
> > >wrote:
> >
> > > [root@xenserver-01 ~]# showmount -e 192.168.2.123
> > > Export list for 192.168.2.123:
> > > /export *
> > > [root@xenserver-01 ~]# mount -t nfs 192.168.2.123:/export/primary
> > > /primarymount/
> > > mount: 192.168.2.123:/export/primary failed, reason given by server:
> > > Permission denied
> > > [root@xenserver-01 ~]#
> > >
> > >
> > >
> > > On Wed, Jul 17, 2013 at 2:10 PM, Bradley Hieber <mercsniper@gmail.com
> > >wrote:
> > >
> > >> Should that also happen if I list /export/ for /export/primary and
> > >> /export/secondary also? Then I am confused as to why I am getting NFS
> > >> permission denied errors then.
> > >>
> > >>
> > >> On Wed, Jul 17, 2013 at 2:06 PM, Dean Kamali <dean.kamali@gmail.com
> > >wrote:
> > >>
> > >>> When you list /etc/primary in /etc/exports it will export all content
> > of
> > >>> that folder, so you don't have to worry about sub-folders.
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <
> mercsniper@gmail.com
> > >>> >wrote:
> > >>>
> > >>> > I can mount /export but it keeps telling me permission denied when
> I
> > >>> try to
> > >>> > mount /export/primary or /export/secondary. The only way I have
> been
> > >>> able
> > >>> > to stop it is manually listing /export/primary and
> > /export/secondary. I
> > >>> > can't manually list every folder though. That is why it is having
> > >>> issues
> > >>> > mounting /export/secondary/template/templ/1/1 to /var/run/cloud/
> > >>> Thoughts?
> > >>> >
> > >>> >
> > >>> > On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com> wrote:
> > >>> >
> > >>> > > hi,
> > >>> > > so i think you can test it in your hypervisor host
> > >>> > >
> > >>> > > do it as root
> > >>> > >
> > >>> > > mount -t nfs 192.168.2.114:/export /mnt
> > >>> > >
> > >>> > > and tell us the result.
> > >>> > >
> > >>> > >
> > >>> > >
> > >>> > > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
> > >>> > >
> > >>> > >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
> > >>> > >> /export
> > >>> > >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
> > >>> > >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
> > >>> > >>
> > >>> > >>
> > >>> > >>
> > >>> > >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <
> > dean.kamali@gmail.com
> > >>> >
> > >>> > >> wrote:
> > >>> > >>
> > >>> > >> what is the permissions on /export ?
> > >>> > >>>
> > >>> > >>>
> > >>> > >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <
> > >>> mercsniper@gmail.com
> > >>> > >>>
> > >>> > >>>> wrote:
> > >>> > >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
> > >>> > >>>> Export list for 192.168.2.123:
> > >>> > >>>> /export 192.168.2.114
> > >>> > >>>>
> > >>> > >>>> Restarting the service did not do anything productive. I
> already
> > >>> did
> > >>> > an
> > >>> > >>>> exportfs -ra before.
> > >>> > >>>>
> > >>> > >>>>
> > >>> > >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <
> > >>> dean.kamali@gmail.com>
> > >>> > >>>> wrote:
> > >>> > >>>>
> > >>> > >>>> Did you restart nfs service after modifying /etc/export ?
> > >>> > >>>>>
> > >>> > >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
> > >>> > >>>>>
> > >>> > >>>>> what dose it show?
> > >>> > >>>>>
> > >>> > >>>>>
> > >>> > >>>>>
> > >>> > >>>>>
> > >>> > >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
> > >>> > mercsniper@gmail.com
> > >>> > >>>>>
> > >>> > >>>>>> wrote:
> > >>> > >>>>>> Hello community,
> > >>> > >>>>>>
> > >>> > >>>>>> The installation documentation for CS 4.1 says to use
> /export
> > >>> > >>>>>> *(rw,async,no_root_squash) for my options. I am having
> > >>> difficulties
> > >>> > >>>>>> mounting the /export/primary folder on my hypervisor as a
> > test.
> > >>> > >>>>>>
> > >>> > >>>>> Syslog
> > >>> > >>>
> > >>> > >>>> is
> > >>> > >>>>
> > >>> > >>>>> reporting "permisison denied" on the hypervisor. The
> management
> > >>> > >>>>>>
> > >>> > >>>>> server
> > >>> > >>>
> > >>> > >>>> is
> > >>> > >>>>
> > >>> > >>>>> Ubuntu 12.04.02 and the hard drives are attached and mounted.
> > Any
> > >>> > >>>>>> assistance?
> > >>> > >>>>>>
> > >>> > >>>>>> --
> > >>> > >>>>>> Brad
> > >>> > >>>>>>
> > >>> > >>>>>>
> > >>> > >>>>
> > >>> > >>>> --
> > >>> > >>>> Brad
> > >>> > >>>>
> > >>> > >>>>
> > >>> > >>
> > >>> > >>
> > >>> > >
> > >>> > > --
> > >>> > > Thanks,
> > >>> > > Jijun
> > >>> > >
> > >>> > >
> > >>> >
> > >>> >
> > >>> > --
> > >>> > Brad
> > >>> >
> > >>>
> > >>
> > >>
> > >>
> > >> --
> > >> Brad
> > >>
> > >
> > >
> > >
> > > --
> > > Brad
> > >
> >
> >
> >
> > --
> > Brad
> >
>
--
Brad
Re: NFS directories
Posted by Carlos Reategui <ca...@reategui.com>.
I'm not an nfs expert but I believe you can only mount paths that have been
explicitly exported. Your export is /export not /export/primary.
On Wed, Jul 17, 2013 at 11:59 AM, Bradley Hieber <me...@gmail.com>wrote:
> Jul 17 14:57:51 master rpc.mountd[31341]: authenticated mount request from
> 192.168.2.114:840 for /export/primary (/export)
> Jul 17 14:57:51 master rpc.mountd[31341]: request to export directory
> /export/primary below nearest filesystem /export
>
>
>
> On Wed, Jul 17, 2013 at 2:47 PM, Bradley Hieber <mercsniper@gmail.com
> >wrote:
>
> > [root@xenserver-01 ~]# showmount -e 192.168.2.123
> > Export list for 192.168.2.123:
> > /export *
> > [root@xenserver-01 ~]# mount -t nfs 192.168.2.123:/export/primary
> > /primarymount/
> > mount: 192.168.2.123:/export/primary failed, reason given by server:
> > Permission denied
> > [root@xenserver-01 ~]#
> >
> >
> >
> > On Wed, Jul 17, 2013 at 2:10 PM, Bradley Hieber <mercsniper@gmail.com
> >wrote:
> >
> >> Should that also happen if I list /export/ for /export/primary and
> >> /export/secondary also? Then I am confused as to why I am getting NFS
> >> permission denied errors then.
> >>
> >>
> >> On Wed, Jul 17, 2013 at 2:06 PM, Dean Kamali <dean.kamali@gmail.com
> >wrote:
> >>
> >>> When you list /etc/primary in /etc/exports it will export all content
> of
> >>> that folder, so you don't have to worry about sub-folders.
> >>>
> >>>
> >>>
> >>>
> >>> On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <mercsniper@gmail.com
> >>> >wrote:
> >>>
> >>> > I can mount /export but it keeps telling me permission denied when I
> >>> try to
> >>> > mount /export/primary or /export/secondary. The only way I have been
> >>> able
> >>> > to stop it is manually listing /export/primary and
> /export/secondary. I
> >>> > can't manually list every folder though. That is why it is having
> >>> issues
> >>> > mounting /export/secondary/template/templ/1/1 to /var/run/cloud/
> >>> Thoughts?
> >>> >
> >>> >
> >>> > On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com> wrote:
> >>> >
> >>> > > hi,
> >>> > > so i think you can test it in your hypervisor host
> >>> > >
> >>> > > do it as root
> >>> > >
> >>> > > mount -t nfs 192.168.2.114:/export /mnt
> >>> > >
> >>> > > and tell us the result.
> >>> > >
> >>> > >
> >>> > >
> >>> > > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
> >>> > >
> >>> > >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
> >>> > >> /export
> >>> > >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
> >>> > >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <
> dean.kamali@gmail.com
> >>> >
> >>> > >> wrote:
> >>> > >>
> >>> > >> what is the permissions on /export ?
> >>> > >>>
> >>> > >>>
> >>> > >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <
> >>> mercsniper@gmail.com
> >>> > >>>
> >>> > >>>> wrote:
> >>> > >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
> >>> > >>>> Export list for 192.168.2.123:
> >>> > >>>> /export 192.168.2.114
> >>> > >>>>
> >>> > >>>> Restarting the service did not do anything productive. I already
> >>> did
> >>> > an
> >>> > >>>> exportfs -ra before.
> >>> > >>>>
> >>> > >>>>
> >>> > >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <
> >>> dean.kamali@gmail.com>
> >>> > >>>> wrote:
> >>> > >>>>
> >>> > >>>> Did you restart nfs service after modifying /etc/export ?
> >>> > >>>>>
> >>> > >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
> >>> > >>>>>
> >>> > >>>>> what dose it show?
> >>> > >>>>>
> >>> > >>>>>
> >>> > >>>>>
> >>> > >>>>>
> >>> > >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
> >>> > mercsniper@gmail.com
> >>> > >>>>>
> >>> > >>>>>> wrote:
> >>> > >>>>>> Hello community,
> >>> > >>>>>>
> >>> > >>>>>> The installation documentation for CS 4.1 says to use /export
> >>> > >>>>>> *(rw,async,no_root_squash) for my options. I am having
> >>> difficulties
> >>> > >>>>>> mounting the /export/primary folder on my hypervisor as a
> test.
> >>> > >>>>>>
> >>> > >>>>> Syslog
> >>> > >>>
> >>> > >>>> is
> >>> > >>>>
> >>> > >>>>> reporting "permisison denied" on the hypervisor. The management
> >>> > >>>>>>
> >>> > >>>>> server
> >>> > >>>
> >>> > >>>> is
> >>> > >>>>
> >>> > >>>>> Ubuntu 12.04.02 and the hard drives are attached and mounted.
> Any
> >>> > >>>>>> assistance?
> >>> > >>>>>>
> >>> > >>>>>> --
> >>> > >>>>>> Brad
> >>> > >>>>>>
> >>> > >>>>>>
> >>> > >>>>
> >>> > >>>> --
> >>> > >>>> Brad
> >>> > >>>>
> >>> > >>>>
> >>> > >>
> >>> > >>
> >>> > >
> >>> > > --
> >>> > > Thanks,
> >>> > > Jijun
> >>> > >
> >>> > >
> >>> >
> >>> >
> >>> > --
> >>> > Brad
> >>> >
> >>>
> >>
> >>
> >>
> >> --
> >> Brad
> >>
> >
> >
> >
> > --
> > Brad
> >
>
>
>
> --
> Brad
>
Re: NFS directories
Posted by Bradley Hieber <me...@gmail.com>.
[root@xenserver-01 ~]# mount -t nfs -v 192.168.2.123:/export/primary
/primarymount/
mount: trying 192.168.2.123 prog 100003 vers 3 prot tcp port 2049
mount: trying 192.168.2.123 prog 100005 vers 3 prot udp port 892
mount: 192.168.2.123:/export/primary failed, reason given by server:
Permission denied
On Wed, Jul 17, 2013 at 2:59 PM, Bradley Hieber <me...@gmail.com>wrote:
> Jul 17 14:57:51 master rpc.mountd[31341]: authenticated mount request from
> 192.168.2.114:840 for /export/primary (/export)
> Jul 17 14:57:51 master rpc.mountd[31341]: request to export directory
> /export/primary below nearest filesystem /export
>
>
>
> On Wed, Jul 17, 2013 at 2:47 PM, Bradley Hieber <me...@gmail.com>wrote:
>
>> [root@xenserver-01 ~]# showmount -e 192.168.2.123
>> Export list for 192.168.2.123:
>> /export *
>> [root@xenserver-01 ~]# mount -t nfs 192.168.2.123:/export/primary
>> /primarymount/
>> mount: 192.168.2.123:/export/primary failed, reason given by server:
>> Permission denied
>> [root@xenserver-01 ~]#
>>
>>
>>
>> On Wed, Jul 17, 2013 at 2:10 PM, Bradley Hieber <me...@gmail.com>wrote:
>>
>>> Should that also happen if I list /export/ for /export/primary and
>>> /export/secondary also? Then I am confused as to why I am getting NFS
>>> permission denied errors then.
>>>
>>>
>>> On Wed, Jul 17, 2013 at 2:06 PM, Dean Kamali <de...@gmail.com>wrote:
>>>
>>>> When you list /etc/primary in /etc/exports it will export all content of
>>>> that folder, so you don't have to worry about sub-folders.
>>>>
>>>>
>>>>
>>>>
>>>> On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <mercsniper@gmail.com
>>>> >wrote:
>>>>
>>>> > I can mount /export but it keeps telling me permission denied when I
>>>> try to
>>>> > mount /export/primary or /export/secondary. The only way I have been
>>>> able
>>>> > to stop it is manually listing /export/primary and /export/secondary.
>>>> I
>>>> > can't manually list every folder though. That is why it is having
>>>> issues
>>>> > mounting /export/secondary/template/templ/1/1 to /var/run/cloud/
>>>> Thoughts?
>>>> >
>>>> >
>>>> > On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com> wrote:
>>>> >
>>>> > > hi,
>>>> > > so i think you can test it in your hypervisor host
>>>> > >
>>>> > > do it as root
>>>> > >
>>>> > > mount -t nfs 192.168.2.114:/export /mnt
>>>> > >
>>>> > > and tell us the result.
>>>> > >
>>>> > >
>>>> > >
>>>> > > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
>>>> > >
>>>> > >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
>>>> > >> /export
>>>> > >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
>>>> > >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
>>>> > >>
>>>> > >>
>>>> > >>
>>>> > >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <
>>>> dean.kamali@gmail.com>
>>>> > >> wrote:
>>>> > >>
>>>> > >> what is the permissions on /export ?
>>>> > >>>
>>>> > >>>
>>>> > >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <
>>>> mercsniper@gmail.com
>>>> > >>>
>>>> > >>>> wrote:
>>>> > >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
>>>> > >>>> Export list for 192.168.2.123:
>>>> > >>>> /export 192.168.2.114
>>>> > >>>>
>>>> > >>>> Restarting the service did not do anything productive. I already
>>>> did
>>>> > an
>>>> > >>>> exportfs -ra before.
>>>> > >>>>
>>>> > >>>>
>>>> > >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <
>>>> dean.kamali@gmail.com>
>>>> > >>>> wrote:
>>>> > >>>>
>>>> > >>>> Did you restart nfs service after modifying /etc/export ?
>>>> > >>>>>
>>>> > >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
>>>> > >>>>>
>>>> > >>>>> what dose it show?
>>>> > >>>>>
>>>> > >>>>>
>>>> > >>>>>
>>>> > >>>>>
>>>> > >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
>>>> > mercsniper@gmail.com
>>>> > >>>>>
>>>> > >>>>>> wrote:
>>>> > >>>>>> Hello community,
>>>> > >>>>>>
>>>> > >>>>>> The installation documentation for CS 4.1 says to use /export
>>>> > >>>>>> *(rw,async,no_root_squash) for my options. I am having
>>>> difficulties
>>>> > >>>>>> mounting the /export/primary folder on my hypervisor as a test.
>>>> > >>>>>>
>>>> > >>>>> Syslog
>>>> > >>>
>>>> > >>>> is
>>>> > >>>>
>>>> > >>>>> reporting "permisison denied" on the hypervisor. The management
>>>> > >>>>>>
>>>> > >>>>> server
>>>> > >>>
>>>> > >>>> is
>>>> > >>>>
>>>> > >>>>> Ubuntu 12.04.02 and the hard drives are attached and mounted.
>>>> Any
>>>> > >>>>>> assistance?
>>>> > >>>>>>
>>>> > >>>>>> --
>>>> > >>>>>> Brad
>>>> > >>>>>>
>>>> > >>>>>>
>>>> > >>>>
>>>> > >>>> --
>>>> > >>>> Brad
>>>> > >>>>
>>>> > >>>>
>>>> > >>
>>>> > >>
>>>> > >
>>>> > > --
>>>> > > Thanks,
>>>> > > Jijun
>>>> > >
>>>> > >
>>>> >
>>>> >
>>>> > --
>>>> > Brad
>>>> >
>>>>
>>>
>>>
>>>
>>> --
>>> Brad
>>>
>>
>>
>>
>> --
>> Brad
>>
>
>
>
> --
> Brad
>
--
Brad
Re: NFS directories
Posted by Bradley Hieber <me...@gmail.com>.
Jul 17 14:57:51 master rpc.mountd[31341]: authenticated mount request from
192.168.2.114:840 for /export/primary (/export)
Jul 17 14:57:51 master rpc.mountd[31341]: request to export directory
/export/primary below nearest filesystem /export
On Wed, Jul 17, 2013 at 2:47 PM, Bradley Hieber <me...@gmail.com>wrote:
> [root@xenserver-01 ~]# showmount -e 192.168.2.123
> Export list for 192.168.2.123:
> /export *
> [root@xenserver-01 ~]# mount -t nfs 192.168.2.123:/export/primary
> /primarymount/
> mount: 192.168.2.123:/export/primary failed, reason given by server:
> Permission denied
> [root@xenserver-01 ~]#
>
>
>
> On Wed, Jul 17, 2013 at 2:10 PM, Bradley Hieber <me...@gmail.com>wrote:
>
>> Should that also happen if I list /export/ for /export/primary and
>> /export/secondary also? Then I am confused as to why I am getting NFS
>> permission denied errors then.
>>
>>
>> On Wed, Jul 17, 2013 at 2:06 PM, Dean Kamali <de...@gmail.com>wrote:
>>
>>> When you list /etc/primary in /etc/exports it will export all content of
>>> that folder, so you don't have to worry about sub-folders.
>>>
>>>
>>>
>>>
>>> On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <mercsniper@gmail.com
>>> >wrote:
>>>
>>> > I can mount /export but it keeps telling me permission denied when I
>>> try to
>>> > mount /export/primary or /export/secondary. The only way I have been
>>> able
>>> > to stop it is manually listing /export/primary and /export/secondary. I
>>> > can't manually list every folder though. That is why it is having
>>> issues
>>> > mounting /export/secondary/template/templ/1/1 to /var/run/cloud/
>>> Thoughts?
>>> >
>>> >
>>> > On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com> wrote:
>>> >
>>> > > hi,
>>> > > so i think you can test it in your hypervisor host
>>> > >
>>> > > do it as root
>>> > >
>>> > > mount -t nfs 192.168.2.114:/export /mnt
>>> > >
>>> > > and tell us the result.
>>> > >
>>> > >
>>> > >
>>> > > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
>>> > >
>>> > >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
>>> > >> /export
>>> > >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
>>> > >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
>>> > >>
>>> > >>
>>> > >>
>>> > >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <dean.kamali@gmail.com
>>> >
>>> > >> wrote:
>>> > >>
>>> > >> what is the permissions on /export ?
>>> > >>>
>>> > >>>
>>> > >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <
>>> mercsniper@gmail.com
>>> > >>>
>>> > >>>> wrote:
>>> > >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
>>> > >>>> Export list for 192.168.2.123:
>>> > >>>> /export 192.168.2.114
>>> > >>>>
>>> > >>>> Restarting the service did not do anything productive. I already
>>> did
>>> > an
>>> > >>>> exportfs -ra before.
>>> > >>>>
>>> > >>>>
>>> > >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <
>>> dean.kamali@gmail.com>
>>> > >>>> wrote:
>>> > >>>>
>>> > >>>> Did you restart nfs service after modifying /etc/export ?
>>> > >>>>>
>>> > >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
>>> > >>>>>
>>> > >>>>> what dose it show?
>>> > >>>>>
>>> > >>>>>
>>> > >>>>>
>>> > >>>>>
>>> > >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
>>> > mercsniper@gmail.com
>>> > >>>>>
>>> > >>>>>> wrote:
>>> > >>>>>> Hello community,
>>> > >>>>>>
>>> > >>>>>> The installation documentation for CS 4.1 says to use /export
>>> > >>>>>> *(rw,async,no_root_squash) for my options. I am having
>>> difficulties
>>> > >>>>>> mounting the /export/primary folder on my hypervisor as a test.
>>> > >>>>>>
>>> > >>>>> Syslog
>>> > >>>
>>> > >>>> is
>>> > >>>>
>>> > >>>>> reporting "permisison denied" on the hypervisor. The management
>>> > >>>>>>
>>> > >>>>> server
>>> > >>>
>>> > >>>> is
>>> > >>>>
>>> > >>>>> Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
>>> > >>>>>> assistance?
>>> > >>>>>>
>>> > >>>>>> --
>>> > >>>>>> Brad
>>> > >>>>>>
>>> > >>>>>>
>>> > >>>>
>>> > >>>> --
>>> > >>>> Brad
>>> > >>>>
>>> > >>>>
>>> > >>
>>> > >>
>>> > >
>>> > > --
>>> > > Thanks,
>>> > > Jijun
>>> > >
>>> > >
>>> >
>>> >
>>> > --
>>> > Brad
>>> >
>>>
>>
>>
>>
>> --
>> Brad
>>
>
>
>
> --
> Brad
>
--
Brad
Re: NFS directories
Posted by Bradley Hieber <me...@gmail.com>.
[root@xenserver-01 ~]# showmount -e 192.168.2.123
Export list for 192.168.2.123:
/export *
[root@xenserver-01 ~]# mount -t nfs 192.168.2.123:/export/primary
/primarymount/
mount: 192.168.2.123:/export/primary failed, reason given by server:
Permission denied
[root@xenserver-01 ~]#
On Wed, Jul 17, 2013 at 2:10 PM, Bradley Hieber <me...@gmail.com>wrote:
> Should that also happen if I list /export/ for /export/primary and
> /export/secondary also? Then I am confused as to why I am getting NFS
> permission denied errors then.
>
>
> On Wed, Jul 17, 2013 at 2:06 PM, Dean Kamali <de...@gmail.com>wrote:
>
>> When you list /etc/primary in /etc/exports it will export all content of
>> that folder, so you don't have to worry about sub-folders.
>>
>>
>>
>>
>> On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <mercsniper@gmail.com
>> >wrote:
>>
>> > I can mount /export but it keeps telling me permission denied when I
>> try to
>> > mount /export/primary or /export/secondary. The only way I have been
>> able
>> > to stop it is manually listing /export/primary and /export/secondary. I
>> > can't manually list every folder though. That is why it is having issues
>> > mounting /export/secondary/template/templ/1/1 to /var/run/cloud/
>> Thoughts?
>> >
>> >
>> > On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com> wrote:
>> >
>> > > hi,
>> > > so i think you can test it in your hypervisor host
>> > >
>> > > do it as root
>> > >
>> > > mount -t nfs 192.168.2.114:/export /mnt
>> > >
>> > > and tell us the result.
>> > >
>> > >
>> > >
>> > > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
>> > >
>> > >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
>> > >> /export
>> > >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
>> > >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
>> > >>
>> > >>
>> > >>
>> > >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <de...@gmail.com>
>> > >> wrote:
>> > >>
>> > >> what is the permissions on /export ?
>> > >>>
>> > >>>
>> > >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <
>> mercsniper@gmail.com
>> > >>>
>> > >>>> wrote:
>> > >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
>> > >>>> Export list for 192.168.2.123:
>> > >>>> /export 192.168.2.114
>> > >>>>
>> > >>>> Restarting the service did not do anything productive. I already
>> did
>> > an
>> > >>>> exportfs -ra before.
>> > >>>>
>> > >>>>
>> > >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <
>> dean.kamali@gmail.com>
>> > >>>> wrote:
>> > >>>>
>> > >>>> Did you restart nfs service after modifying /etc/export ?
>> > >>>>>
>> > >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
>> > >>>>>
>> > >>>>> what dose it show?
>> > >>>>>
>> > >>>>>
>> > >>>>>
>> > >>>>>
>> > >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
>> > mercsniper@gmail.com
>> > >>>>>
>> > >>>>>> wrote:
>> > >>>>>> Hello community,
>> > >>>>>>
>> > >>>>>> The installation documentation for CS 4.1 says to use /export
>> > >>>>>> *(rw,async,no_root_squash) for my options. I am having
>> difficulties
>> > >>>>>> mounting the /export/primary folder on my hypervisor as a test.
>> > >>>>>>
>> > >>>>> Syslog
>> > >>>
>> > >>>> is
>> > >>>>
>> > >>>>> reporting "permisison denied" on the hypervisor. The management
>> > >>>>>>
>> > >>>>> server
>> > >>>
>> > >>>> is
>> > >>>>
>> > >>>>> Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
>> > >>>>>> assistance?
>> > >>>>>>
>> > >>>>>> --
>> > >>>>>> Brad
>> > >>>>>>
>> > >>>>>>
>> > >>>>
>> > >>>> --
>> > >>>> Brad
>> > >>>>
>> > >>>>
>> > >>
>> > >>
>> > >
>> > > --
>> > > Thanks,
>> > > Jijun
>> > >
>> > >
>> >
>> >
>> > --
>> > Brad
>> >
>>
>
>
>
> --
> Brad
>
--
Brad
Re: NFS directories
Posted by Bradley Hieber <me...@gmail.com>.
Should that also happen if I list /export/ for /export/primary and
/export/secondary also? Then I am confused as to why I am getting NFS
permission denied errors then.
On Wed, Jul 17, 2013 at 2:06 PM, Dean Kamali <de...@gmail.com> wrote:
> When you list /etc/primary in /etc/exports it will export all content of
> that folder, so you don't have to worry about sub-folders.
>
>
>
>
> On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <mercsniper@gmail.com
> >wrote:
>
> > I can mount /export but it keeps telling me permission denied when I try
> to
> > mount /export/primary or /export/secondary. The only way I have been able
> > to stop it is manually listing /export/primary and /export/secondary. I
> > can't manually list every folder though. That is why it is having issues
> > mounting /export/secondary/template/templ/1/1 to /var/run/cloud/
> Thoughts?
> >
> >
> > On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com> wrote:
> >
> > > hi,
> > > so i think you can test it in your hypervisor host
> > >
> > > do it as root
> > >
> > > mount -t nfs 192.168.2.114:/export /mnt
> > >
> > > and tell us the result.
> > >
> > >
> > >
> > > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
> > >
> > >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
> > >> /export
> > >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
> > >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
> > >>
> > >>
> > >>
> > >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <de...@gmail.com>
> > >> wrote:
> > >>
> > >> what is the permissions on /export ?
> > >>>
> > >>>
> > >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <
> mercsniper@gmail.com
> > >>>
> > >>>> wrote:
> > >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
> > >>>> Export list for 192.168.2.123:
> > >>>> /export 192.168.2.114
> > >>>>
> > >>>> Restarting the service did not do anything productive. I already did
> > an
> > >>>> exportfs -ra before.
> > >>>>
> > >>>>
> > >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <dean.kamali@gmail.com
> >
> > >>>> wrote:
> > >>>>
> > >>>> Did you restart nfs service after modifying /etc/export ?
> > >>>>>
> > >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
> > >>>>>
> > >>>>> what dose it show?
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
> > mercsniper@gmail.com
> > >>>>>
> > >>>>>> wrote:
> > >>>>>> Hello community,
> > >>>>>>
> > >>>>>> The installation documentation for CS 4.1 says to use /export
> > >>>>>> *(rw,async,no_root_squash) for my options. I am having
> difficulties
> > >>>>>> mounting the /export/primary folder on my hypervisor as a test.
> > >>>>>>
> > >>>>> Syslog
> > >>>
> > >>>> is
> > >>>>
> > >>>>> reporting "permisison denied" on the hypervisor. The management
> > >>>>>>
> > >>>>> server
> > >>>
> > >>>> is
> > >>>>
> > >>>>> Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
> > >>>>>> assistance?
> > >>>>>>
> > >>>>>> --
> > >>>>>> Brad
> > >>>>>>
> > >>>>>>
> > >>>>
> > >>>> --
> > >>>> Brad
> > >>>>
> > >>>>
> > >>
> > >>
> > >
> > > --
> > > Thanks,
> > > Jijun
> > >
> > >
> >
> >
> > --
> > Brad
> >
>
--
Brad
Re: NFS directories
Posted by Dean Kamali <de...@gmail.com>.
When you list /etc/primary in /etc/exports it will export all content of
that folder, so you don't have to worry about sub-folders.
On Wed, Jul 17, 2013 at 2:00 PM, Bradley Hieber <me...@gmail.com>wrote:
> I can mount /export but it keeps telling me permission denied when I try to
> mount /export/primary or /export/secondary. The only way I have been able
> to stop it is manually listing /export/primary and /export/secondary. I
> can't manually list every folder though. That is why it is having issues
> mounting /export/secondary/template/templ/1/1 to /var/run/cloud/ Thoughts?
>
>
> On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com> wrote:
>
> > hi,
> > so i think you can test it in your hypervisor host
> >
> > do it as root
> >
> > mount -t nfs 192.168.2.114:/export /mnt
> >
> > and tell us the result.
> >
> >
> >
> > On 07/17/2013 02:02 AM, Bradley Hieber wrote:
> >
> >> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
> >> /export
> >> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
> >> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
> >>
> >>
> >>
> >> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <de...@gmail.com>
> >> wrote:
> >>
> >> what is the permissions on /export ?
> >>>
> >>>
> >>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <mercsniper@gmail.com
> >>>
> >>>> wrote:
> >>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
> >>>> Export list for 192.168.2.123:
> >>>> /export 192.168.2.114
> >>>>
> >>>> Restarting the service did not do anything productive. I already did
> an
> >>>> exportfs -ra before.
> >>>>
> >>>>
> >>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <de...@gmail.com>
> >>>> wrote:
> >>>>
> >>>> Did you restart nfs service after modifying /etc/export ?
> >>>>>
> >>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
> >>>>>
> >>>>> what dose it show?
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <
> mercsniper@gmail.com
> >>>>>
> >>>>>> wrote:
> >>>>>> Hello community,
> >>>>>>
> >>>>>> The installation documentation for CS 4.1 says to use /export
> >>>>>> *(rw,async,no_root_squash) for my options. I am having difficulties
> >>>>>> mounting the /export/primary folder on my hypervisor as a test.
> >>>>>>
> >>>>> Syslog
> >>>
> >>>> is
> >>>>
> >>>>> reporting "permisison denied" on the hypervisor. The management
> >>>>>>
> >>>>> server
> >>>
> >>>> is
> >>>>
> >>>>> Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
> >>>>>> assistance?
> >>>>>>
> >>>>>> --
> >>>>>> Brad
> >>>>>>
> >>>>>>
> >>>>
> >>>> --
> >>>> Brad
> >>>>
> >>>>
> >>
> >>
> >
> > --
> > Thanks,
> > Jijun
> >
> >
>
>
> --
> Brad
>
Re: NFS directories
Posted by Bradley Hieber <me...@gmail.com>.
I can mount /export but it keeps telling me permission denied when I try to
mount /export/primary or /export/secondary. The only way I have been able
to stop it is manually listing /export/primary and /export/secondary. I
can't manually list every folder though. That is why it is having issues
mounting /export/secondary/template/templ/1/1 to /var/run/cloud/ Thoughts?
On Tue, Jul 16, 2013 at 9:09 PM, Jijun <ji...@gmail.com> wrote:
> hi,
> so i think you can test it in your hypervisor host
>
> do it as root
>
> mount -t nfs 192.168.2.114:/export /mnt
>
> and tell us the result.
>
>
>
> On 07/17/2013 02:02 AM, Bradley Hieber wrote:
>
>> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
>> /export
>> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
>> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
>>
>>
>>
>> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <de...@gmail.com>
>> wrote:
>>
>> what is the permissions on /export ?
>>>
>>>
>>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <mercsniper@gmail.com
>>>
>>>> wrote:
>>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
>>>> Export list for 192.168.2.123:
>>>> /export 192.168.2.114
>>>>
>>>> Restarting the service did not do anything productive. I already did an
>>>> exportfs -ra before.
>>>>
>>>>
>>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <de...@gmail.com>
>>>> wrote:
>>>>
>>>> Did you restart nfs service after modifying /etc/export ?
>>>>>
>>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
>>>>>
>>>>> what dose it show?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <mercsniper@gmail.com
>>>>>
>>>>>> wrote:
>>>>>> Hello community,
>>>>>>
>>>>>> The installation documentation for CS 4.1 says to use /export
>>>>>> *(rw,async,no_root_squash) for my options. I am having difficulties
>>>>>> mounting the /export/primary folder on my hypervisor as a test.
>>>>>>
>>>>> Syslog
>>>
>>>> is
>>>>
>>>>> reporting "permisison denied" on the hypervisor. The management
>>>>>>
>>>>> server
>>>
>>>> is
>>>>
>>>>> Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
>>>>>> assistance?
>>>>>>
>>>>>> --
>>>>>> Brad
>>>>>>
>>>>>>
>>>>
>>>> --
>>>> Brad
>>>>
>>>>
>>
>>
>
> --
> Thanks,
> Jijun
>
>
--
Brad
Re: NFS directories
Posted by Jijun <ji...@gmail.com>.
hi,
so i think you can test it in your hypervisor host
do it as root
mount -t nfs 192.168.2.114:/export /mnt
and tell us the result.
On 07/17/2013 02:02 AM, Bradley Hieber wrote:
> drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
> /export
> drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
> drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
>
>
>
> On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <de...@gmail.com> wrote:
>
>> what is the permissions on /export ?
>>
>>
>> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <mercsniper@gmail.com
>>> wrote:
>>> [root@xenserver-01 /]# showmount -e 192.168.2.123
>>> Export list for 192.168.2.123:
>>> /export 192.168.2.114
>>>
>>> Restarting the service did not do anything productive. I already did an
>>> exportfs -ra before.
>>>
>>>
>>> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <de...@gmail.com>
>>> wrote:
>>>
>>>> Did you restart nfs service after modifying /etc/export ?
>>>>
>>>> From your hypervisor run showmount -e IP_ADDR_OF_NFS
>>>>
>>>> what dose it show?
>>>>
>>>>
>>>>
>>>>
>>>> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <mercsniper@gmail.com
>>>>> wrote:
>>>>> Hello community,
>>>>>
>>>>> The installation documentation for CS 4.1 says to use /export
>>>>> *(rw,async,no_root_squash) for my options. I am having difficulties
>>>>> mounting the /export/primary folder on my hypervisor as a test.
>> Syslog
>>> is
>>>>> reporting "permisison denied" on the hypervisor. The management
>> server
>>> is
>>>>> Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
>>>>> assistance?
>>>>>
>>>>> --
>>>>> Brad
>>>>>
>>>
>>>
>>> --
>>> Brad
>>>
>
>
--
Thanks,
Jijun
Re: NFS directories
Posted by Bradley Hieber <me...@gmail.com>.
drwxr-xr-x 4 root root 4096 Jul 16 13:15 export
/export
drwxr-xr-x 3 root root 4096 Jul 16 13:11 primary
drwxr-xr-x 4 root root 4096 Jul 11 19:45 secondary
On Tue, Jul 16, 2013 at 1:56 PM, Dean Kamali <de...@gmail.com> wrote:
> what is the permissions on /export ?
>
>
> On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <mercsniper@gmail.com
> >wrote:
>
> > [root@xenserver-01 /]# showmount -e 192.168.2.123
> > Export list for 192.168.2.123:
> > /export 192.168.2.114
> >
> > Restarting the service did not do anything productive. I already did an
> > exportfs -ra before.
> >
> >
> > On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <de...@gmail.com>
> > wrote:
> >
> > > Did you restart nfs service after modifying /etc/export ?
> > >
> > > From your hypervisor run showmount -e IP_ADDR_OF_NFS
> > >
> > > what dose it show?
> > >
> > >
> > >
> > >
> > > On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <mercsniper@gmail.com
> > > >wrote:
> > >
> > > > Hello community,
> > > >
> > > > The installation documentation for CS 4.1 says to use /export
> > > > *(rw,async,no_root_squash) for my options. I am having difficulties
> > > > mounting the /export/primary folder on my hypervisor as a test.
> Syslog
> > is
> > > > reporting "permisison denied" on the hypervisor. The management
> server
> > is
> > > > Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
> > > > assistance?
> > > >
> > > > --
> > > > Brad
> > > >
> > >
> >
> >
> >
> > --
> > Brad
> >
>
--
Brad
Re: NFS directories
Posted by Dean Kamali <de...@gmail.com>.
what is the permissions on /export ?
On Tue, Jul 16, 2013 at 1:45 PM, Bradley Hieber <me...@gmail.com>wrote:
> [root@xenserver-01 /]# showmount -e 192.168.2.123
> Export list for 192.168.2.123:
> /export 192.168.2.114
>
> Restarting the service did not do anything productive. I already did an
> exportfs -ra before.
>
>
> On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <de...@gmail.com>
> wrote:
>
> > Did you restart nfs service after modifying /etc/export ?
> >
> > From your hypervisor run showmount -e IP_ADDR_OF_NFS
> >
> > what dose it show?
> >
> >
> >
> >
> > On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <mercsniper@gmail.com
> > >wrote:
> >
> > > Hello community,
> > >
> > > The installation documentation for CS 4.1 says to use /export
> > > *(rw,async,no_root_squash) for my options. I am having difficulties
> > > mounting the /export/primary folder on my hypervisor as a test. Syslog
> is
> > > reporting "permisison denied" on the hypervisor. The management server
> is
> > > Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
> > > assistance?
> > >
> > > --
> > > Brad
> > >
> >
>
>
>
> --
> Brad
>
Re: NFS directories
Posted by Bradley Hieber <me...@gmail.com>.
[root@xenserver-01 /]# showmount -e 192.168.2.123
Export list for 192.168.2.123:
/export 192.168.2.114
Restarting the service did not do anything productive. I already did an
exportfs -ra before.
On Tue, Jul 16, 2013 at 1:42 PM, Dean Kamali <de...@gmail.com> wrote:
> Did you restart nfs service after modifying /etc/export ?
>
> From your hypervisor run showmount -e IP_ADDR_OF_NFS
>
> what dose it show?
>
>
>
>
> On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <mercsniper@gmail.com
> >wrote:
>
> > Hello community,
> >
> > The installation documentation for CS 4.1 says to use /export
> > *(rw,async,no_root_squash) for my options. I am having difficulties
> > mounting the /export/primary folder on my hypervisor as a test. Syslog is
> > reporting "permisison denied" on the hypervisor. The management server is
> > Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
> > assistance?
> >
> > --
> > Brad
> >
>
--
Brad
Re: NFS directories
Posted by Dean Kamali <de...@gmail.com>.
Did you restart nfs service after modifying /etc/export ?
>From your hypervisor run showmount -e IP_ADDR_OF_NFS
what dose it show?
On Tue, Jul 16, 2013 at 1:40 PM, Bradley Hieber <me...@gmail.com>wrote:
> Hello community,
>
> The installation documentation for CS 4.1 says to use /export
> *(rw,async,no_root_squash) for my options. I am having difficulties
> mounting the /export/primary folder on my hypervisor as a test. Syslog is
> reporting "permisison denied" on the hypervisor. The management server is
> Ubuntu 12.04.02 and the hard drives are attached and mounted. Any
> assistance?
>
> --
> Brad
>