You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@nuttx.apache.org by Adam Feuer <ad...@starcat.io> on 2020/01/09 03:57:41 UTC
Question about savedefconfig warnings
Hi,
I'm trying to save a defconfig, so I can put together an example for USB
over Ethernet example I'm working on. It's working on the SAMA5D36-Xplained
via USB 2.0 HS, by the way– very nice.
When I do 'make savedefconfig' I get the following message twice:
warning: (IMXRT_ENET && TIVA_PHY_INTERRUPTS && ARCH_BOARD_SAMA5D3X_EK &&
ARCH_BOARD_SAMA5D3_XPLAINED && ARCH_BOARD_SAMA5D4_EK && ARCH_BOARD_SAM4EEK
&& ARCH_BOARD_SAME70_XPLAINED && ARCH_BOARD_SAMV71_XULT &&
BOARD_CUSTOM_INTERRUPT) selects ARCH_PHY_INTERRUPT which has unmet direct
dependencies (NETDEVICES && ARCH_HAVE_PHY)
What's going on? How do I find out what's causing this and how do I make it
go away? It's not causing a problem with the compile, that compiles and
runs ok.
cheers
adam
--
Adam Feuer <ad...@starcat.io>
Re: Question about savedefconfig warnings
Posted by Nathan Hartman <ha...@gmail.com>.
On Thu, Jan 9, 2020 at 7:36 AM Alin Jerpelea <je...@gmail.com> wrote:
> I cant see any config !
>
> heck what selects those options and why they are not selected
> NETDEVICES
> ARCH_HAVE_PHY
I get this warning whenever I configure or try to savedefconfig. In my case
it is because I'm using a Tiva MCU, which has a built-in PHY as part of the
SoC. I don't know of any other MCU that does. NuttX's Kconfig assumes that
a PHY is a separate chip, so because I don't select a PHY, I get this
warning. Not sure why you are getting it now.
Nathan
>
Re: Question about savedefconfig warnings
Posted by Adam Feuer <ad...@starcat.io>.
Greg,
Thanks for explaining that the defconfig attachment got removed, here it is.
> #
> # Automatically generated file; DO NOT EDIT.
> # Nuttx/ Configuration
> #
>
> #
> # Build Setup
> #
> # CONFIG_EXPERIMENTAL is not set
> # CONFIG_DEFAULT_SMALL is not set
> CONFIG_HOST_LINUX=y
> # CONFIG_HOST_MACOS is not set
> # CONFIG_HOST_WINDOWS is not set
> # CONFIG_HOST_OTHER is not set
>
> #
> # Build Configuration
> #
> CONFIG_APPS_DIR="../apps"
> CONFIG_BUILD_FLAT=y
> # CONFIG_BUILD_2PASS is not set
>
> #
> # Binary Output Formats
> #
> # CONFIG_CXD56_BINARY is not set
> CONFIG_INTELHEX_BINARY=y
> # CONFIG_MOTOROLA_SREC is not set
> CONFIG_RAW_BINARY=y
> # CONFIG_UBOOT_UIMAGE is not set
> # CONFIG_DFU_BINARY is not set
>
> #
> # Customize Header Files
> #
> # CONFIG_ARCH_HAVE_STDINT_H is not set
> # CONFIG_ARCH_HAVE_STDBOOL_H is not set
> # CONFIG_ARCH_HAVE_MATH_H is not set
> # CONFIG_ARCH_FLOAT_H is not set
> CONFIG_ARCH_HAVE_STDARG_H=y
> # CONFIG_ARCH_STDARG_H is not set
> # CONFIG_ARCH_HAVE_SETJMP is not set
> # CONFIG_ARCH_DEBUG_H is not set
>
> #
> # Debug Options
> #
> CONFIG_DEBUG_ALERT=y
> CONFIG_DEBUG_FEATURES=y
>
> #
> # Debug SYSLOG Output Controls
> #
> # CONFIG_DEBUG_ERROR is not set
> # CONFIG_DEBUG_ASSERTIONS is not set
>
> #
> # Subsystem Debug Options
> #
> # CONFIG_DEBUG_BINFMT is not set
> # CONFIG_DEBUG_FS is not set
> # CONFIG_DEBUG_GRAPHICS is not set
> # CONFIG_DEBUG_LIB is not set
> # CONFIG_DEBUG_MM is not set
> # CONFIG_DEBUG_NET is not set
> # CONFIG_DEBUG_POWER is not set
> # CONFIG_DEBUG_SCHED is not set
>
> #
> # OS Function Debug Options
> #
> # CONFIG_DEBUG_DMA is not set
> # CONFIG_DEBUG_IRQ is not set
>
> #
> # Driver Debug Options
> #
> # CONFIG_DEBUG_LEDS is not set
> # CONFIG_DEBUG_GPIO is not set
> # CONFIG_DEBUG_MEMCARD is not set
> # CONFIG_DEBUG_TIMER is not set
> # CONFIG_DEBUG_USB is not set
> CONFIG_ARCH_HAVE_STACKCHECK=y
> # CONFIG_STACK_COLORATION is not set
> # CONFIG_ARCH_HAVE_HEAPCHECK is not set
> CONFIG_DEBUG_SYMBOLS=y
> CONFIG_ARCH_HAVE_CUSTOMOPT=y
> CONFIG_DEBUG_NOOPT=y
> # CONFIG_DEBUG_CUSTOMOPT is not set
> # CONFIG_DEBUG_FULLOPT is not set
>
> #
> # System Type
> #
> CONFIG_ARCH_ARM=y
> # CONFIG_ARCH_AVR is not set
> # CONFIG_ARCH_HC is not set
> # CONFIG_ARCH_MIPS is not set
> # CONFIG_ARCH_MISOC is not set
> # CONFIG_ARCH_RENESAS is not set
> # CONFIG_ARCH_RISCV is not set
> # CONFIG_ARCH_SIM is not set
> # CONFIG_ARCH_X86 is not set
> # CONFIG_ARCH_XTENSA is not set
> # CONFIG_ARCH_Z16 is not set
> # CONFIG_ARCH_Z80 is not set
> # CONFIG_ARCH_OR1K is not set
> CONFIG_ARCH="arm"
>
> #
> # ARM Options
> #
> # CONFIG_ARCH_CHIP_A1X is not set
> # CONFIG_ARCH_CHIP_AM335X is not set
> # CONFIG_ARCH_CHIP_C5471 is not set
> # CONFIG_ARCH_CHIP_DM320 is not set
> # CONFIG_ARCH_CHIP_EFM32 is not set
> # CONFIG_ARCH_CHIP_IMX1 is not set
> # CONFIG_ARCH_CHIP_IMX6 is not set
> # CONFIG_ARCH_CHIP_IMXRT is not set
> # CONFIG_ARCH_CHIP_KINETIS is not set
> # CONFIG_ARCH_CHIP_KL is not set
> # CONFIG_ARCH_CHIP_LC823450 is not set
> # CONFIG_ARCH_CHIP_LM is not set
> # CONFIG_ARCH_CHIP_LPC17XX_40XX is not set
> # CONFIG_ARCH_CHIP_LPC214X is not set
> # CONFIG_ARCH_CHIP_LPC2378 is not set
> # CONFIG_ARCH_CHIP_LPC31XX is not set
> # CONFIG_ARCH_CHIP_LPC43XX is not set
> # CONFIG_ARCH_CHIP_LPC54XX is not set
> # CONFIG_ARCH_CHIP_MAX326XX is not set
> # CONFIG_ARCH_CHIP_MOXART is not set
> # CONFIG_ARCH_CHIP_NRF52 is not set
> # CONFIG_ARCH_CHIP_NUC1XX is not set
> # CONFIG_ARCH_CHIP_S32K1XX is not set
> CONFIG_ARCH_CHIP_SAMA5=y
> # CONFIG_ARCH_CHIP_SAMD2X is not set
> # CONFIG_ARCH_CHIP_SAML2X is not set
> # CONFIG_ARCH_CHIP_SAMD5X is not set
> # CONFIG_ARCH_CHIP_SAME5X is not set
> # CONFIG_ARCH_CHIP_SAM34 is not set
> # CONFIG_ARCH_CHIP_SAMV7 is not set
> # CONFIG_ARCH_CHIP_STM32 is not set
> # CONFIG_ARCH_CHIP_STM32F0 is not set
> # CONFIG_ARCH_CHIP_STM32L0 is not set
> # CONFIG_ARCH_CHIP_STM32G0 is not set
> # CONFIG_ARCH_CHIP_STM32F7 is not set
> # CONFIG_ARCH_CHIP_STM32H7 is not set
> # CONFIG_ARCH_CHIP_STM32L4 is not set
> # CONFIG_ARCH_CHIP_STR71X is not set
> # CONFIG_ARCH_CHIP_TMS570 is not set
> # CONFIG_ARCH_CHIP_TIVA is not set
> # CONFIG_ARCH_CHIP_XMC4 is not set
> # CONFIG_ARCH_CHIP_CXD56XX is not set
> # CONFIG_ARCH_ARM7TDMI is not set
> # CONFIG_ARCH_ARM920T is not set
> # CONFIG_ARCH_ARM926EJS is not set
> # CONFIG_ARCH_ARM1136J is not set
> # CONFIG_ARCH_ARM1156T2 is not set
> # CONFIG_ARCH_ARM1176JZ is not set
> # CONFIG_ARCH_CORTEXM0 is not set
> # CONFIG_ARCH_CORTEXM23 is not set
> # CONFIG_ARCH_ARMV7M is not set
> # CONFIG_ARCH_CORTEXM3 is not set
> # CONFIG_ARCH_CORTEXM33 is not set
> # CONFIG_ARCH_CORTEXM4 is not set
> # CONFIG_ARCH_CORTEXM7 is not set
> CONFIG_ARCH_ARMV7A=y
> CONFIG_ARCH_CORTEXA5=y
> # CONFIG_ARCH_CORTEXA7 is not set
> # CONFIG_ARCH_CORTEXA8 is not set
> # CONFIG_ARCH_CORTEXA9 is not set
> # CONFIG_ARCH_ARMV7R is not set
> # CONFIG_ARCH_CORTEXR4 is not set
> # CONFIG_ARCH_CORTEXR5 is not set
> # CONFIG_ARCH_CORTEXR7 is not set
> CONFIG_ARCH_FAMILY="armv7-a"
> CONFIG_ARCH_CHIP="sama5"
> # CONFIG_ARCH_HAVE_TRUSTZONE is not set
> # CONFIG_ARM_THUMB is not set
> # CONFIG_ARM_HAVE_MPU_UNIFIED is not set
> CONFIG_ARCH_HAVE_LOWVECTORS=y
> CONFIG_ARCH_LOWVECTORS=y
> # CONFIG_ARCH_ROMPGTABLE is not set
> # CONFIG_ARCH_HAVE_HARDFAULT_DEBUG is not set
> # CONFIG_ARCH_HAVE_MEMFAULT_DEBUG is not set
> CONFIG_ARM_SEMIHOSTING_SYSLOG=y
>
> #
> # ARMv7-A Configuration Options
> #
> # CONFIG_ARMV7A_HAVE_GICv2 is not set
> # CONFIG_ARMV7A_HAVE_GTM is not set
> # CONFIG_ARMV7A_HAVE_PTM is not set
> # CONFIG_ARMV7A_HAVE_L2CC is not set
> # CONFIG_ARMV7A_HAVE_L2CC_PL310 is not set
> # CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
> # CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYL is not set
> CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL=y
> # CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
> # CONFIG_ARMV7A_DECODEFIQ is not set
>
> #
> # SAMA5 Configuration Options
> #
> # CONFIG_SAMA5_HAVE_AESB is not set
> # CONFIG_SAMA5_HAVE_ICM is not set
> # CONFIG_SAMA5_HAVE_RXLP is not set
> CONFIG_SAMA5_HAVE_UART0=y
> CONFIG_SAMA5_HAVE_UART1=y
> # CONFIG_SAMA5_HAVE_UART2 is not set
> # CONFIG_SAMA5_HAVE_UART3 is not set
> # CONFIG_SAMA5_HAVE_UART4 is not set
> CONFIG_SAMA5_HAVE_USART0=y
> CONFIG_SAMA5_HAVE_USART1=y
> CONFIG_SAMA5_HAVE_USART2=y
> CONFIG_SAMA5_HAVE_USART3=y
> # CONFIG_SAMA5_HAVE_USART4 is not set
> # CONFIG_SAMA5_HAVE_FLEXCOM0 is not set
> # CONFIG_SAMA5_HAVE_FLEXCOM1 is not set
> # CONFIG_SAMA5_HAVE_FLEXCOM2 is not set
> # CONFIG_SAMA5_HAVE_FLEXCOM3 is not set
> # CONFIG_SAMA5_HAVE_FLEXCOM4 is not set
> CONFIG_SAMA5_HAVE_CAN0=y
> CONFIG_SAMA5_HAVE_CAN1=y
> CONFIG_SAMA5_HAVE_DMA=y
> # CONFIG_SAMA5_HAVE_DDR32 is not set
> # CONFIG_SAMA5_HAVE_XDMA is not set
> CONFIG_SAMA5_HAVE_LCDC=y
> CONFIG_SAMA5_HAVE_GMAC=y
> CONFIG_SAMA5_HAVE_EMACA=y
> # CONFIG_SAMA5_HAVE_EMACB is not set
> # CONFIG_SAMA5_HAVE_EMAC1 is not set
> CONFIG_SAMA5_HAVE_HSMCI2=y
> CONFIG_SAMA5_HAVE_PIOE=y
> # CONFIG_SAMA5_HAVE_SAIC is not set
> # CONFIG_SAMA5_HAVE_SBM is not set
> # CONFIG_SAMA5_HAVE_SFC is not set
> # CONFIG_SAMA5_HAVE_SPI2 is not set
> # CONFIG_SAMA5_HAVE_TC is not set
> CONFIG_SAMA5_HAVE_TC1=y
> # CONFIG_SAMA5_HAVE_TC2 is not set
> # CONFIG_SAMA5_HAVE_TWI3 is not set
> # CONFIG_SAMA5_HAVE_VDEC is not set
> # CONFIG_SAMA5_FLEXCOM is not set
> # CONFIG_SAMA5_FLEXCOM_USART is not set
> # CONFIG_SAMA5_FLEXCOM_SPI is not set
> # CONFIG_SAMA5_FLEXCOM_TWI is not set
> # CONFIG_ARCH_CHIP_SAMA5D2 is not set
> CONFIG_ARCH_CHIP_SAMA5D3=y
> # CONFIG_ARCH_CHIP_SAMA5D4 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D21 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D22 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D23 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D24 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D26 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D27 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D28 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D31 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D33 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D34 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D35 is not set
> CONFIG_ARCH_CHIP_ATSAMA5D36=y
> # CONFIG_ARCH_CHIP_ATSAMA5D41 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D42 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D43 is not set
> # CONFIG_ARCH_CHIP_ATSAMA5D44 is not set
>
> #
> # SAMA5 Peripheral Support
> #
> # CONFIG_SAMA5_AES is not set
> # CONFIG_SAMA5_TDES is not set
> CONFIG_SAMA5_DBGU=y
> # CONFIG_SAMA5_PIT is not set
> # CONFIG_SAMA5_WDT is not set
> # CONFIG_SAMA5_RTC is not set
> CONFIG_SAMA5_HSMC=y
> # CONFIG_SAMA5_SMD is not set
> CONFIG_SAMA5_UART0=y
> CONFIG_SAMA5_UART1=y
> # CONFIG_SAMA5_USART0 is not set
> # CONFIG_SAMA5_USART1 is not set
> # CONFIG_SAMA5_USART2 is not set
> # CONFIG_SAMA5_USART3 is not set
> # CONFIG_SAMA5_TWI0 is not set
> # CONFIG_SAMA5_TWI1 is not set
> # CONFIG_SAMA5_TWI2 is not set
> # CONFIG_SAMA5_HSMCI0 is not set
> # CONFIG_SAMA5_HSMCI1 is not set
> # CONFIG_SAMA5_HSMCI2 is not set
> # CONFIG_SAMA5_SPI0 is not set
> # CONFIG_SAMA5_SPI1 is not set
> # CONFIG_SAMA5_TC0 is not set
> # CONFIG_SAMA5_TC1 is not set
> # CONFIG_SAMA5_PWM is not set
> # CONFIG_SAMA5_ADC is not set
> CONFIG_SAMA5_DMAC0=y
> CONFIG_SAMA5_DMAC1=y
> # CONFIG_SAMA5_UHPHS is not set
> CONFIG_SAMA5_UDPHS=y
> # CONFIG_SAMA5_GMAC is not set
> # CONFIG_SAMA5_EMACA is not set
> # CONFIG_SAMA5_EMACB is not set
> # CONFIG_SAMA5_LCDC is not set
> # CONFIG_SAMA5_ISI is not set
> # CONFIG_SAMA5_SSC0 is not set
> # CONFIG_SAMA5_SSC1 is not set
> # CONFIG_SAMA5_CAN0 is not set
> # CONFIG_SAMA5_CAN1 is not set
> # CONFIG_SAMA5_SHA is not set
> # CONFIG_SAMA5_TRNG is not set
> # CONFIG_SAMA5_ARM is not set
> # CONFIG_SAMA5_FUSE is not set
> # CONFIG_SAMA5_MPDDRC is not set
> CONFIG_SAMA5_PIO_IRQ=y
> CONFIG_SAMA5_PIOA_IRQ=y
> CONFIG_SAMA5_PIOB_IRQ=y
> CONFIG_SAMA5_PIOC_IRQ=y
> CONFIG_SAMA5_PIOD_IRQ=y
> CONFIG_SAMA5_PIOE_IRQ=y
>
> #
> # DBGU Configuration
> #
> CONFIG_SAMA5_DBGU_CONSOLE=y
> CONFIG_SAMA5_DBGU_RXBUFSIZE=256
> CONFIG_SAMA5_DBGU_TXBUFSIZE=256
> CONFIG_SAMA5_DBGU_NOCONFIG=y
>
> #
> # USB High Speed Device Controller driver (DCD) options
> #
> CONFIG_SAMA5_UDPHS_NDTDS=8
> CONFIG_SAMA5_UDPHS_PREALLOCATE=y
>
> #
> # External Memory Configuration
> #
> # CONFIG_SAMA5_EBICS0 is not set
> # CONFIG_SAMA5_EBICS1 is not set
> # CONFIG_SAMA5_EBICS2 is not set
> # CONFIG_SAMA5_EBICS3 is not set
> # CONFIG_SAMA5_HAVE_NAND is not set
> # CONFIG_SAMA5_HAVE_PMECC is not set
> # CONFIG_SAMA5_BOOT_ISRAM is not set
> CONFIG_SAMA5_BOOT_SDRAM=y
>
> #
> # Heap Configuration
> #
> CONFIG_SAMA5_ISRAM_HEAP=y
> # CONFIG_SAMA5_DDRCS_RESERVE is not set
> # CONFIG_ARCH_TOOLCHAIN_IAR is not set
> CONFIG_ARCH_TOOLCHAIN_GNU=y
> # CONFIG_ARCH_GNU_NO_WEAKFUNCTIONS is not set
>
> #
> # Architecture Options
> #
> # CONFIG_ARCH_NOINTC is not set
> # CONFIG_ARCH_VECNOTIRQ is not set
> # CONFIG_ARCH_HAVE_IRQTRIGGER is not set
> CONFIG_ARCH_DMA=y
> CONFIG_ARCH_HAVE_IRQPRIO=y
> CONFIG_ARCH_ICACHE=y
> CONFIG_ARCH_DCACHE=y
> # CONFIG_ARCH_L2CACHE is not set
> CONFIG_ARCH_HAVE_ADDRENV=y
> CONFIG_ARCH_NEED_ADDRENV_MAPPING=y
> # CONFIG_ARCH_HAVE_MULTICPU is not set
> CONFIG_ARCH_HAVE_VFORK=y
> CONFIG_ARCH_HAVE_FPU=y
> # CONFIG_ARCH_HAVE_DPFPU is not set
> CONFIG_ARCH_HAVE_MMU=y
> # CONFIG_ARCH_HAVE_MPU is not set
> CONFIG_ARCH_NAND_HWECC=y
> # CONFIG_ARCH_HAVE_EXTCLK is not set
> # CONFIG_ARCH_HAVE_POWEROFF is not set
> # CONFIG_ARCH_HAVE_PROGMEM is not set
> # CONFIG_ARCH_HAVE_RESET is not set
> CONFIG_ARCH_HAVE_TESTSET=y
> CONFIG_ARCH_HAVE_FETCHADD=y
> # CONFIG_ARCH_HAVE_RTC_SUBSECONDS is not set
> # CONFIG_ARCH_HAVE_GARBAGE is not set
> # CONFIG_ARCH_GLOBAL_IRQDISABLE is not set
> CONFIG_ARCH_FPU=y
> CONFIG_ARCH_USE_MMU=y
> # CONFIG_ARCH_ADDRENV is not set
> # CONFIG_PAGING is not set
> CONFIG_ARCH_IRQPRIO=y
> CONFIG_ARCH_STACKDUMP=y
> # CONFIG_ENDIAN_BIG is not set
> # CONFIG_ARCH_IDLE_CUSTOM is not set
> # CONFIG_ARCH_HAVE_RAMFUNCS is not set
> # CONFIG_ARCH_HAVE_RAMVECTORS is not set
> # CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
>
> #
> # Board Settings
> #
> CONFIG_BOARD_LOOPSPERMSEC=65775
>
> #
> # Interrupt options
> #
> CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
> CONFIG_ARCH_INTERRUPTSTACK=2048
> # CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
>
> #
> # Boot options
> #
> # CONFIG_BOOT_RUNFROMEXTSRAM is not set
> # CONFIG_BOOT_RUNFROMFLASH is not set
> # CONFIG_BOOT_RUNFROMISRAM is not set
> CONFIG_BOOT_RUNFROMSDRAM=y
> # CONFIG_BOOT_COPYTORAM is not set
>
> #
> # Boot Memory Configuration
> #
> CONFIG_RAM_START=0x20000000
> CONFIG_RAM_VSTART=0x20000000
> CONFIG_RAM_SIZE=268435456
> # CONFIG_ARCH_HAVE_SDRAM is not set
>
> #
> # Board Selection
> #
> CONFIG_ARCH_BOARD_SAMA5D3_XPLAINED=y
> # CONFIG_ARCH_BOARD_CUSTOM is not set
> CONFIG_ARCH_BOARD="sama5d3-xplained"
>
> #
> # Common Board Options
> #
> CONFIG_ARCH_HAVE_LEDS=y
> CONFIG_ARCH_LEDS=y
> CONFIG_ARCH_HAVE_BUTTONS=y
> # CONFIG_ARCH_BUTTONS is not set
> CONFIG_ARCH_HAVE_IRQBUTTONS=y
>
> #
> # Board-Specific Options
> #
> # CONFIG_SAMA5D3XPLAINED_384MHZ is not set
> # CONFIG_SAMA5D3XPLAINED_396MHZ is not set
> CONFIG_SAMA5D3XPLAINED_528MHZ=y
> # CONFIG_SAMA5D3XPLAINED_SLOWCLOCK is not set
> # CONFIG_BOARD_CRASHDUMP is not set
> CONFIG_LIB_BOARDCTL=y
> # CONFIG_BOARDCTL_FINALINIT is not set
> # CONFIG_BOARDCTL_UNIQUEID is not set
> CONFIG_BOARDCTL_MKRD=y
> # CONFIG_BOARDCTL_ROMDISK is not set
> # CONFIG_BOARDCTL_APP_SYMTAB is not set
> CONFIG_BOARDCTL_USBDEVCTRL=y
> # CONFIG_BOARDCTL_TESTSET is not set
> # CONFIG_BOARDCTL_IOCTL is not set
>
> #
> # RTOS Features
> #
> # CONFIG_DISABLE_OS_API is not set
>
> #
> # Clocks and Timers
> #
> CONFIG_ARCH_HAVE_TICKLESS=y
> # CONFIG_SCHED_TICKLESS is not set
> CONFIG_USEC_PER_TICK=10000
> # CONFIG_SYSTEMTICK_HOOK is not set
> # CONFIG_SYSTEM_TIME64 is not set
> # CONFIG_CLOCK_MONOTONIC is not set
> # CONFIG_ARCH_HAVE_TIMEKEEPING is not set
> # CONFIG_JULIAN_TIME is not set
> CONFIG_START_YEAR=2014
> CONFIG_START_MONTH=7
> CONFIG_START_DAY=31
> CONFIG_MAX_WDOGPARMS=2
> CONFIG_PREALLOC_WDOGS=16
> CONFIG_WDOG_INTRESERVE=2
> CONFIG_PREALLOC_TIMERS=4
>
> #
> # Tasks and Scheduling
> #
> # CONFIG_SPINLOCK is not set
> # CONFIG_IRQCHAIN is not set
> # CONFIG_IRQCOUNT is not set
> # CONFIG_INIT_NONE is not set
> CONFIG_INIT_ENTRYPOINT=y
> # CONFIG_INIT_FILEPATH is not set
> CONFIG_USER_ENTRYPOINT="nsh_main"
> CONFIG_USERMAIN_PRIORITY=100
> CONFIG_RR_INTERVAL=200
> # CONFIG_SCHED_SPORADIC is not set
> CONFIG_TASK_NAME_SIZE=31
> CONFIG_MAX_TASKS=16
> # CONFIG_SCHED_HAVE_PARENT is not set
> CONFIG_SCHED_WAITPID=y
> # CONFIG_SCHED_USER_IDENTITY is not set
>
> #
> # Pthread Options
> #
> CONFIG_NPTHREAD_KEYS=4
> # CONFIG_PTHREAD_MUTEX_TYPES is not set
> CONFIG_PTHREAD_MUTEX_ROBUST=y
> # CONFIG_PTHREAD_MUTEX_UNSAFE is not set
> # CONFIG_PTHREAD_MUTEX_BOTH is not set
> # CONFIG_PTHREAD_CLEANUP is not set
> # CONFIG_CANCELLATION_POINTS is not set
>
> #
> # Performance Monitoring
> #
> # CONFIG_SCHED_SUSPENDSCHEDULER is not set
> # CONFIG_SCHED_RESUMESCHEDULER is not set
> # CONFIG_SCHED_IRQMONITOR is not set
> # CONFIG_SCHED_CRITMONITOR is not set
> # CONFIG_SCHED_CPULOAD is not set
> # CONFIG_SCHED_INSTRUMENTATION is not set
>
> #
> # Files and I/O
> #
> CONFIG_DEV_CONSOLE=y
> # CONFIG_FDCLONE_DISABLE is not set
> # CONFIG_FDCLONE_STDIO is not set
> CONFIG_SDCLONE_DISABLE=y
> CONFIG_NFILE_DESCRIPTORS=8
> CONFIG_NFILE_STREAMS=8
> CONFIG_NAME_MAX=32
> # CONFIG_PRIORITY_INHERITANCE is not set
>
> #
> # RTOS hooks
> #
> # CONFIG_BOARD_EARLY_INITIALIZE is not set
> # CONFIG_BOARD_LATE_INITIALIZE is not set
> # CONFIG_SCHED_STARTHOOK is not set
> # CONFIG_SCHED_ATEXIT is not set
> # CONFIG_SCHED_ONEXIT is not set
>
> #
> # Signal Configuration
> #
> # CONFIG_SIG_EVTHREAD is not set
> # CONFIG_SIG_DEFAULT is not set
>
> #
> # Signal Numbers
> #
>
> #
> # Standard Signal Numbers
> #
> CONFIG_SIG_SIGUSR1=1
> CONFIG_SIG_SIGUSR2=2
> CONFIG_SIG_SIGALRM=3
> CONFIG_SIG_PIPE=11
>
> #
> # Non-standard Signal Numbers
> #
> CONFIG_SIG_SIGCONDTIMEDOUT=16
> CONFIG_SIG_SIGWORK=17
>
> #
> # POSIX Message Queue Options
> #
> CONFIG_PREALLOC_MQ_MSGS=4
> CONFIG_MQ_MAXMSGSIZE=32
> # CONFIG_MODULE is not set
>
> #
> # Work queue support
> #
> CONFIG_SCHED_WORKQUEUE=y
> CONFIG_WQUEUE_NOTIFIER=y
> CONFIG_SCHED_HPWORK=y
> CONFIG_SCHED_HPNTHREADS=1
> CONFIG_SCHED_HPWORKPRIORITY=224
> CONFIG_SCHED_HPWORKSTACKSIZE=2048
> # CONFIG_SCHED_LPWORK is not set
>
> #
> # Stack and heap information
> #
> CONFIG_IDLETHREAD_STACKSIZE=1024
> CONFIG_USERMAIN_STACKSIZE=2048
> CONFIG_PTHREAD_STACK_MIN=256
> CONFIG_PTHREAD_STACK_DEFAULT=2048
> # CONFIG_LIB_SYSCALL is not set
>
> #
> # Device Drivers
> #
> # CONFIG_DEV_SIMPLE_ADDRENV is not set
> CONFIG_DEV_NULL=y
> # CONFIG_DEV_ZERO is not set
> # CONFIG_DEV_URANDOM is not set
> CONFIG_DEV_LOOP=y
> CONFIG_DRVR_MKRD=y
>
> #
> # Buffering
> #
> # CONFIG_DRVR_WRITEBUFFER is not set
> # CONFIG_DRVR_READAHEAD is not set
> CONFIG_RAMDISK=y
> # CONFIG_CAN is not set
> # CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
> # CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set
> CONFIG_ARCH_HAVE_I2CRESET=y
> # CONFIG_I2C is not set
> # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
> # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
> # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
> # CONFIG_SPI is not set
> # CONFIG_I2S is not set
>
> #
> # Timer Driver Support
> #
> # CONFIG_PWM is not set
> # CONFIG_TIMER is not set
> # CONFIG_ONESHOT is not set
> # CONFIG_RTC is not set
> # CONFIG_WATCHDOG is not set
> # CONFIG_ANALOG is not set
> # CONFIG_DRIVERS_AUDIO is not set
> # CONFIG_FB_CMAP is not set
> # CONFIG_FB_TRANSPARENCY is not set
> # CONFIG_DRIVERS_VIDEO is not set
> # CONFIG_BCH is not set
> # CONFIG_INPUT is not set
>
> #
> # IO Expander/GPIO Support
> #
> # CONFIG_IOEXPANDER is not set
> # CONFIG_DEV_GPIO is not set
>
> #
> # LCD Driver Support
> #
> # CONFIG_LCD is not set
>
> #
> # Character/Segment LCD Devices
> #
> # CONFIG_SLCD is not set
>
> #
> # Other LCD-related Devices
> #
> # CONFIG_LCD_OTHER is not set
>
> #
> # LED Support
> #
> # CONFIG_USERLED is not set
> # CONFIG_LEDS_APA102 is not set
> # CONFIG_LEDS_MAX7219 is not set
> # CONFIG_RGBLED is not set
> # CONFIG_PCA9635PW is not set
> # CONFIG_NCP5623C is not set
> # CONFIG_ARCH_HAVE_SDIO is not set
> # CONFIG_ARCH_HAVE_SDIOWAIT_WRCOMPLETE is not set
> # CONFIG_ARCH_HAVE_SDIO_PREFLIGHT is not set
> # CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT is not set
> CONFIG_MMCSD=y
> CONFIG_MMCSD_NSLOTS=1
> # CONFIG_MMCSD_READONLY is not set
> # CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set
> CONFIG_MMCSD_MMCSUPPORT=y
> CONFIG_MMCSD_HAVE_CARDDETECT=y
> CONFIG_MMCSD_HAVE_WRITEPROTECT=y
> # CONFIG_SDIO_DMA is not set
> # CONFIG_MODEM is not set
> # CONFIG_MTD is not set
> # CONFIG_EEPROM is not set
> CONFIG_NETDEVICES=y
>
> #
> # General Ethernet MAC Driver Options
> #
> # CONFIG_NETDEV_LOOPBACK is not set
> CONFIG_NETDEV_TELNET=y
> CONFIG_TELNET_RXBUFFER_SIZE=256
> CONFIG_TELNET_TXBUFFER_SIZE=256
> CONFIG_TELNET_MAXLCLIENTS=8
> # CONFIG_TELNET_CHARACTER_MODE is not set
> CONFIG_TELNET_IOTHREAD_PRIORITY=100
> CONFIG_TELNET_IOTHREAD_STACKSIZE=1024
> # CONFIG_TELNET_SUPPORT_NAWS is not set
> # CONFIG_ARCH_HAVE_NETDEV_STATISTICS is not set
> # CONFIG_NET_DUMPPACKET is not set
>
> #
> # External Ethernet MAC Device Support
> #
> # CONFIG_NET_DM90x0 is not set
> # CONFIG_ENC28J60 is not set
> # CONFIG_ENCX24J600 is not set
> # CONFIG_NET_SLIP is not set
> # CONFIG_NET_FTMAC100 is not set
> # CONFIG_NET_LAN91C111 is not set
> CONFIG_ARCH_PHY_INTERRUPT=y
> # CONFIG_PIPES is not set
> # CONFIG_PM is not set
> # CONFIG_DRIVERS_POWERLED is not set
> # CONFIG_DRIVERS_SMPS is not set
> # CONFIG_DRIVERS_MOTOR is not set
> # CONFIG_POWER is not set
> # CONFIG_SENSORS is not set
> CONFIG_SERIAL=y
> # CONFIG_DEV_LOWCONSOLE is not set
> # CONFIG_SERIAL_REMOVABLE is not set
> CONFIG_SERIAL_CONSOLE=y
> # CONFIG_16550_UART is not set
> CONFIG_OTHER_UART_SERIALDRIVER=y
> CONFIG_MCU_SERIAL=y
> CONFIG_STANDARD_SERIAL=y
> CONFIG_SERIAL_NPOLLWAITERS=2
> # CONFIG_SERIAL_IFLOWCONTROL is not set
> # CONFIG_SERIAL_RS485CONTROL is not set
> # CONFIG_SERIAL_OFLOWCONTROL is not set
> # CONFIG_SERIAL_TXDMA is not set
> # CONFIG_SERIAL_RXDMA is not set
> # CONFIG_SERIAL_TIOCSERGSTRUCT is not set
> CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y
> # CONFIG_SERIAL_TERMIOS is not set
> # CONFIG_UART0_SERIAL_CONSOLE is not set
> # CONFIG_UART1_SERIAL_CONSOLE is not set
> CONFIG_OTHER_SERIAL_CONSOLE=y
> # CONFIG_NO_SERIAL_CONSOLE is not set
> # CONFIG_UART_SERIALDRIVER is not set
> CONFIG_UART0_SERIALDRIVER=y
> CONFIG_UART1_SERIALDRIVER=y
> # CONFIG_UART2_SERIALDRIVER is not set
> # CONFIG_UART3_SERIALDRIVER is not set
> # CONFIG_UART4_SERIALDRIVER is not set
> # CONFIG_UART5_SERIALDRIVER is not set
> # CONFIG_UART6_SERIALDRIVER is not set
> # CONFIG_UART7_SERIALDRIVER is not set
> # CONFIG_UART8_SERIALDRIVER is not set
>
> #
> # UART0 Configuration
> #
> CONFIG_UART0_RXBUFSIZE=256
> CONFIG_UART0_TXBUFSIZE=256
> CONFIG_UART0_BAUD=115200
> CONFIG_UART0_BITS=8
> CONFIG_UART0_PARITY=0
> CONFIG_UART0_2STOP=0
> # CONFIG_UART0_IFLOWCONTROL is not set
> # CONFIG_UART0_OFLOWCONTROL is not set
> # CONFIG_UART0_RXDMA is not set
> # CONFIG_UART0_TXDMA is not set
>
> #
> # UART1 Configuration
> #
> CONFIG_UART1_RXBUFSIZE=256
> CONFIG_UART1_TXBUFSIZE=256
> CONFIG_UART1_BAUD=115200
> CONFIG_UART1_BITS=8
> CONFIG_UART1_PARITY=0
> CONFIG_UART1_2STOP=0
> # CONFIG_UART1_IFLOWCONTROL is not set
> # CONFIG_UART1_OFLOWCONTROL is not set
> # CONFIG_UART1_RXDMA is not set
> # CONFIG_UART1_TXDMA is not set
> # CONFIG_LPUART_SERIALDRIVER is not set
> # CONFIG_LPUART0_SERIALDRIVER is not set
> # CONFIG_LPUART1_SERIALDRIVER is not set
> # CONFIG_LPUART2_SERIALDRIVER is not set
> # CONFIG_LPUART3_SERIALDRIVER is not set
> # CONFIG_LPUART4_SERIALDRIVER is not set
> # CONFIG_LPUART5_SERIALDRIVER is not set
> # CONFIG_LPUART6_SERIALDRIVER is not set
> # CONFIG_LPUART7_SERIALDRIVER is not set
> # CONFIG_LPUART8_SERIALDRIVER is not set
> # CONFIG_USART0_SERIALDRIVER is not set
> # CONFIG_USART1_SERIALDRIVER is not set
> # CONFIG_USART2_SERIALDRIVER is not set
> # CONFIG_USART3_SERIALDRIVER is not set
> # CONFIG_USART4_SERIALDRIVER is not set
> # CONFIG_USART5_SERIALDRIVER is not set
> # CONFIG_USART6_SERIALDRIVER is not set
> # CONFIG_USART7_SERIALDRIVER is not set
> # CONFIG_USART8_SERIALDRIVER is not set
> # CONFIG_USART9_SERIALDRIVER is not set
> # CONFIG_SCI0_SERIALDRIVER is not set
> # CONFIG_SCI1_SERIALDRIVER is not set
> # CONFIG_SCI2_SERIALDRIVER is not set
> # CONFIG_SCI3_SERIALDRIVER is not set
> # CONFIG_SCI4_SERIALDRIVER is not set
> # CONFIG_SCI5_SERIALDRIVER is not set
> # CONFIG_SCI6_SERIALDRIVER is not set
> # CONFIG_SCI7_SERIALDRIVER is not set
> # CONFIG_SCI8_SERIALDRIVER is not set
> # CONFIG_SCI9_SERIALDRIVER is not set
> # CONFIG_SCI10_SERIALDRIVER is not set
> # CONFIG_SCI11_SERIALDRIVER is not set
> # CONFIG_SCI12_SERIALDRIVER is not set
> # CONFIG_PSEUDOTERM is not set
> CONFIG_USBDEV=y
>
> #
> # USB Device Controller Driver Options
> #
> # CONFIG_USBDEV_ISOCHRONOUS is not set
> CONFIG_USBDEV_DUALSPEED=y
> CONFIG_USBDEV_SELFPOWERED=y
> # CONFIG_USBDEV_BUSPOWERED is not set
> CONFIG_USBDEV_MAXPOWER=100
> # CONFIG_USBDEV_DMA is not set
> # CONFIG_ARCH_USBDEV_STALLQUEUE is not set
> # CONFIG_USBDEV_TRACE is not set
> # CONFIG_USBDEV_CUSTOM_TXFIFO_SIZE is not set
>
> #
> # USB Device Class Driver Options
> #
> # CONFIG_USBDEV_COMPOSITE is not set
> # CONFIG_PL2303 is not set
> # CONFIG_CDCACM is not set
> # CONFIG_USBMSC is not set
> # CONFIG_RNDIS is not set
> # CONFIG_DFU is not set
> CONFIG_NET_CDCECM=y
> CONFIG_CDCECM_EP0MAXPACKET=64
> CONFIG_CDCECM_EPINTIN=1
> CONFIG_CDCECM_EPINTIN_FSSIZE=16
> CONFIG_CDCECM_EPINTIN_HSSIZE=16
> CONFIG_CDCECM_EPBULKOUT=5
> CONFIG_CDCECM_EPBULKOUT_FSSIZE=64
> CONFIG_CDCECM_EPBULKOUT_HSSIZE=512
> CONFIG_CDCECM_EPBULKIN=2
> CONFIG_CDCECM_EPBULKIN_FSSIZE=64
> CONFIG_CDCECM_EPBULKIN_HSSIZE=512
> CONFIG_CDCECM_VENDORID=0x0525
> CONFIG_CDCECM_PRODUCTID=0xa4a2
> CONFIG_CDCECM_VENDORSTR="NuttX"
> CONFIG_CDCECM_PRODUCTSTR="CDC/ECM Ethernet"
> # CONFIG_USBHOST is not set
> # CONFIG_USBMISC is not set
> # CONFIG_HAVE_USBTRACE is not set
> # CONFIG_DRIVERS_WIRELESS is not set
> # CONFIG_DRIVERS_CONTACTLESS is not set
> # CONFIG_1WIRE is not set
>
> #
> # System Logging
> #
> CONFIG_ARCH_SYSLOG=y
> # CONFIG_SYSLOG_WRITE is not set
> # CONFIG_RAMLOG is not set
> # CONFIG_SYSLOG_INTBUFFER is not set
> CONFIG_SYSLOG_TIMESTAMP=y
> # CONFIG_SYSLOG_TIMESTAMP_REALTIME is not set
> # CONFIG_SYSLOG_PREFIX is not set
> # CONFIG_SYSLOG_SERIAL_CONSOLE is not set
> # CONFIG_SYSLOG_FILE is not set
> # CONFIG_CONSOLE_SYSLOG is not set
> CONFIG_SYSLOG_CHARDEV=y
> # CONFIG_SPECIFIC_DRIVERS is not set
> # CONFIG_DRIVERS_RF is not set
>
> #
> # Networking Support
> #
> CONFIG_ARCH_HAVE_NET=y
> # CONFIG_ARCH_HAVE_PHY is not set
> CONFIG_NET_WRITE_BUFFERS=y
> CONFIG_NET_READAHEAD=y
> # CONFIG_NET_MCASTGROUP is not set
> CONFIG_NET=y
> # CONFIG_NET_PROMISCUOUS is not set
>
> #
> # Driver buffer configuration
> #
> CONFIG_NET_ETH_PKTSIZE=590
> CONFIG_NET_GUARDSIZE=2
>
> #
> # Link layer support
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_NET_LOOPBACK is not set
> # CONFIG_NET_TUN is not set
> # CONFIG_NET_USRSOCK is not set
> # CONFIG_NETDEV_LATEINIT is not set
>
> #
> # Network Device Operations
> #
> # CONFIG_NETDEV_IOCTL is not set
> # CONFIG_NETDEV_PHY_IOCTL is not set
> # CONFIG_NETDEV_IFINDEX is not set
> # CONFIG_NETDOWN_NOTIFIER is not set
>
> #
> # Internet Protocol Selection
> #
> CONFIG_NET_IPv4=y
> # CONFIG_NET_IPv6 is not set
> # CONFIG_NET_IPFORWARD is not set
>
> #
> # Socket Support
> #
> CONFIG_NSOCKET_DESCRIPTORS=8
> CONFIG_NET_NACTIVESOCKETS=16
> CONFIG_NET_SOCKOPTS=y
> # CONFIG_NET_TCPPROTO_OPTIONS is not set
> # CONFIG_NET_UDPPROTO_OPTIONS is not set
> # CONFIG_NET_SOLINGER is not set
>
> #
> # Raw Socket Support
> #
> # CONFIG_NET_PKT is not set
>
> #
> # Unix Domain Socket Support
> #
> # CONFIG_NET_LOCAL is not set
>
> #
> # Netlink Socket Support
> #
> # CONFIG_NET_NETLINK is not set
>
> #
> # TCP/IP Networking
> #
> CONFIG_NET_TCP=y
> # CONFIG_NET_TCP_NO_STACK is not set
> # CONFIG_NET_TCP_DELAYED_ACK is not set
> # CONFIG_NET_TCP_KEEPALIVE is not set
> # CONFIG_NET_TCPURGDATA is not set
> CONFIG_NET_TCP_CONNS=8
> CONFIG_NET_TCP_NPOLLWAITERS=1
> CONFIG_NET_TCP_RTO=3
> CONFIG_NET_TCP_WAIT_TIMEOUT=120
> CONFIG_NET_MAX_LISTENPORTS=20
> CONFIG_NET_TCP_NOTIFIER=y
> CONFIG_NET_TCP_READAHEAD=y
> CONFIG_NET_TCP_WRITE_BUFFERS=y
> CONFIG_NET_TCP_NWRBCHAINS=8
> # CONFIG_NET_TCP_WRBUFFER_DEBUG is not set
> CONFIG_NET_TCP_RECVDELAY=0
> # CONFIG_NET_TCPBACKLOG is not set
> # CONFIG_NET_SENDFILE is not set
>
> #
> # UDP Networking
> #
> CONFIG_NET_UDP=y
> # CONFIG_NET_UDP_NO_STACK is not set
> CONFIG_NET_BROADCAST=y
> # CONFIG_NET_UDP_BINDTODEVICE is not set
> # CONFIG_NET_UDP_CHECKSUMS is not set
> CONFIG_NET_UDP_CONNS=8
> CONFIG_NET_UDP_NPOLLWAITERS=1
> CONFIG_NET_UDP_READAHEAD=y
> # CONFIG_NET_UDP_WRITE_BUFFERS is not set
> # CONFIG_NET_UDP_NOTIFIER is not set
>
> #
> # Bluetooth socket support
> #
>
> #
> # IEEE 802.15.4 socket support
> #
>
> #
> # ICMP Networking Support
> #
> CONFIG_NET_ICMP=y
> # CONFIG_NET_ICMP_NO_STACK is not set
> CONFIG_NET_ICMP_SOCKET=y
> CONFIG_NET_ICMP_NCONNS=4
> CONFIG_NET_ICMP_NPOLLWAITERS=1
> # CONFIG_NET_IGMP is not set
>
> #
> # ARP Configuration
> #
> CONFIG_NET_ARP=y
> CONFIG_NET_ARPTAB_SIZE=16
> CONFIG_NET_ARP_MAXAGE=120
> CONFIG_NET_ARP_IPIN=y
> CONFIG_NET_ARP_SEND=y
> CONFIG_ARP_SEND_MAXTRIES=5
> CONFIG_ARP_SEND_DELAYMSEC=20
>
> #
> # User-space networking stack API
> #
> # CONFIG_NET_ARCH_INCR32 is not set
> # CONFIG_NET_ARCH_CHKSUM is not set
> CONFIG_NET_STATISTICS=y
> # CONFIG_NET_HAVE_STAR is not set
>
> #
> # Network Topologies
> #
>
> #
> # Routing Table Configuration
> #
> CONFIG_NET_ROUTE=y
> CONFIG_ROUTE_IPv4_RAMROUTE=y
> # CONFIG_ROUTE_IPv4_ROMROUTE is not set
> # CONFIG_ROUTE_IPv4_FILEROUTE is not set
> CONFIG_ROUTE_MAX_IPv4_RAMROUTES=4
>
> #
> # Crypto API
> #
> # CONFIG_CRYPTO is not set
>
> #
> # File Systems
> #
>
> #
> # File system configuration
> #
> # CONFIG_DISABLE_MOUNTPOINT is not set
> # CONFIG_FS_AUTOMOUNTER is not set
> # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
> # CONFIG_PSEUDOFS_SOFTLINKS is not set
> CONFIG_FS_READABLE=y
> CONFIG_FS_WRITABLE=y
> # CONFIG_FS_NAMED_SEMAPHORES is not set
> CONFIG_FS_MQUEUE_MPATH="/var/mqueue"
> # CONFIG_FS_RAMMAP is not set
>
> #
> # Partition Table
> #
> # CONFIG_PTABLE_PARTITION is not set
> CONFIG_FS_FAT=y
> CONFIG_FAT_LCNAMES=y
> CONFIG_FAT_LFN=y
> CONFIG_FAT_MAXFNAME=32
> # CONFIG_FAT_LFN_ALIAS_HASH is not set
> CONFIG_FAT_LFN_ALIAS_TRAILCHARS=0
> # CONFIG_FS_FATTIME is not set
> # CONFIG_FAT_FORCE_INDIRECT is not set
> # CONFIG_FAT_DMAMEMORY is not set
> # CONFIG_FAT_DIRECT_RETRY is not set
> # CONFIG_NFS is not set
> # CONFIG_FS_NXFFS is not set
> # CONFIG_FS_ROMFS is not set
> # CONFIG_FS_CROMFS is not set
> # CONFIG_FS_TMPFS is not set
> # CONFIG_FS_SMARTFS is not set
> # CONFIG_FS_BINFS is not set
> CONFIG_FS_PROCFS=y
> # CONFIG_FS_PROCFS_REGISTER is not set
>
> #
> # Exclude individual procfs entries
> #
> # CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set
> CONFIG_FS_PROCFS_EXCLUDE_ENVIRON=y
> # CONFIG_FS_PROCFS_EXCLUDE_BLOCKS is not set
> # CONFIG_FS_PROCFS_EXCLUDE_MOUNT is not set
> # CONFIG_FS_PROCFS_EXCLUDE_USAGE is not set
> # CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set
> CONFIG_FS_PROCFS_EXCLUDE_VERSION=y
> # CONFIG_FS_PROCFS_EXCLUDE_MEMINFO is not set
> # CONFIG_FS_PROCFS_EXCLUDE_IOBINFO is not set
> # CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set
> # CONFIG_FS_PROCFS_EXCLUDE_NET is not set
> # CONFIG_FS_PROCFS_EXCLUDE_ROUTE is not set
> # CONFIG_FS_SPIFFS is not set
> # CONFIG_FS_LITTLEFS is not set
> # CONFIG_FS_UNIONFS is not set
> # CONFIG_FS_HOSTFS is not set
>
> #
> # Graphics Support
> #
> # CONFIG_NX is not set
> # CONFIG_NXFONTS is not set
>
> #
> # Font Cache Pixel Depths
> #
> # CONFIG_NXFONTS_DISABLE_1BPP is not set
> # CONFIG_NXFONTS_DISABLE_2BPP is not set
> # CONFIG_NXFONTS_DISABLE_4BPP is not set
> # CONFIG_NXFONTS_DISABLE_8BPP is not set
> # CONFIG_NXFONTS_DISABLE_16BPP is not set
> # CONFIG_NXFONTS_DISABLE_24BPP is not set
> # CONFIG_NXFONTS_DISABLE_32BPP is not set
> CONFIG_NXFONTS_PACKEDMSFIRST=y
> # CONFIG_NXGLIB is not set
>
> #
> # Memory Management
> #
> # CONFIG_MM_SMALL is not set
> CONFIG_MM_REGIONS=1
> # CONFIG_ARCH_HAVE_HEAP2 is not set
> # CONFIG_GRAN is not set
> # CONFIG_MM_PGALLOC is not set
> # CONFIG_MM_FILL_ALLOCATIONS is not set
>
> #
> # Common I/O Buffer Support
> #
> CONFIG_MM_IOB=y
> CONFIG_IOB_NBUFFERS=24
> CONFIG_IOB_BUFSIZE=196
> CONFIG_IOB_NCHAINS=24
> CONFIG_IOB_THROTTLE=0
> # CONFIG_IOB_NOTIFIER is not set
> # CONFIG_IOB_DEBUG is not set
>
> #
> # Audio Support
> #
> # CONFIG_AUDIO is not set
>
> #
> # Video Support
> #
>
> #
> # Video subsystem
> #
> # CONFIG_VIDEO is not set
>
> #
> # Wireless Support
> #
> # CONFIG_WIRELESS is not set
>
> #
> # Binary Loader
> #
> # CONFIG_BINFMT_DISABLE is not set
> # CONFIG_BINFMT_LOADABLE is not set
> # CONFIG_PIC is not set
> # CONFIG_NXFLAT is not set
> # CONFIG_ELF is not set
> CONFIG_SYMTAB_ORDEREDBYNAME=y
>
> #
> # Library Routines
> #
>
> #
> # Standard C Library Options
> #
>
> #
> # Standard C I/O
> #
> # CONFIG_STDIO_DISABLE_BUFFERING is not set
> CONFIG_STDIO_BUFFER_SIZE=64
> CONFIG_STDIO_LINEBUFFER=y
> CONFIG_NUNGET_CHARS=2
> # CONFIG_LIBC_PRINT_LEGACY is not set
> # CONFIG_LIBC_FLOATINGPOINT is not set
> CONFIG_LIBC_LONG_LONG=y
> # CONFIG_LIBC_NUMBERED_ARGS is not set
> # CONFIG_LIBC_SCANSET is not set
> # CONFIG_EOL_IS_CR is not set
> # CONFIG_EOL_IS_LF is not set
> # CONFIG_EOL_IS_BOTH_CRLF is not set
> CONFIG_EOL_IS_EITHER_CRLF=y
> # CONFIG_MEMCPY_VIK is not set
> # CONFIG_LIBM is not set
>
> #
> # Architecture-Specific Support
> #
> CONFIG_ARCH_LOWPUTC=y
> # CONFIG_ARCH_ROMGETC is not set
> # CONFIG_LIBC_ARCH_MEMCPY is not set
> # CONFIG_LIBC_ARCH_MEMCMP is not set
> # CONFIG_LIBC_ARCH_MEMMOVE is not set
> # CONFIG_LIBC_ARCH_MEMSET is not set
> # CONFIG_LIBC_ARCH_STRCHR is not set
> # CONFIG_LIBC_ARCH_STRCMP is not set
> # CONFIG_LIBC_ARCH_STRCPY is not set
> # CONFIG_LIBC_ARCH_STRNCPY is not set
> # CONFIG_LIBC_ARCH_STRLEN is not set
> # CONFIG_LIBC_ARCH_STRNLEN is not set
> # CONFIG_LIBC_ARCH_ELF is not set
> # CONFIG_ARMV7A_MEMCPY is not set
>
> #
> # stdlib Options
> #
> CONFIG_LIB_RAND_ORDER=1
> CONFIG_LIB_HOMEDIR="/"
> CONFIG_LIBC_TMPDIR="/tmp"
> CONFIG_LIBC_MAX_TMPFILE=32
>
> #
> # Program Execution Options
> #
> # CONFIG_LIBC_EXECFUNCS is not set
> CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
> CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
> CONFIG_LIB_HOSTNAME=""
>
> #
> # errno Decode Support
> #
> # CONFIG_LIBC_STRERROR is not set
> # CONFIG_LIBC_PERROR_STDOUT is not set
>
> #
> # memcpy/memset Options
> #
> # CONFIG_MEMSET_OPTSPEED is not set
>
> #
> # pthread support
> #
> # CONFIG_LIBC_DLFCN is not set
> # CONFIG_LIBC_MODLIB is not set
> # CONFIG_LIBC_GROUP_FILE is not set
> # CONFIG_LIBC_PASSWD_FILE is not set
> # CONFIG_LIBC_WCHAR is not set
> # CONFIG_LIBC_LOCALE is not set
> # CONFIG_LIBC_LZF is not set
>
> #
> # Time/Time Zone Support
> #
> # CONFIG_LIBC_LOCALTIME is not set
> # CONFIG_TIME_EXTENDED is not set
> CONFIG_ARCH_HAVE_TLS=y
>
> #
> # Thread Local Storage (TLS)
> #
> # CONFIG_TLS is not set
>
> #
> # Network-Related Options
> #
> # CONFIG_LIBC_IPv6_ADDRCONV is not set
> CONFIG_LIBC_NETDB=y
>
> #
> # NETDB Support
> #
> # CONFIG_LIBC_GAISTRERROR is not set
> # CONFIG_NETDB_HOSTFILE is not set
> # CONFIG_NETDB_DNSCLIENT is not set
> # CONFIG_LIBC_IOCTL_VARIADIC is not set
> CONFIG_LIB_SENDFILE_BUFSIZE=512
>
> #
> # Non-standard Library Support
> #
> # CONFIG_LIB_CRC64_FAST is not set
> # CONFIG_LIB_KBDCODEC is not set
> # CONFIG_LIB_SLCDCODEC is not set
> # CONFIG_LIB_ENVPATH is not set
> # CONFIG_LIB_HEX2BIN is not set
> CONFIG_BUILTIN=y
>
> #
> # Basic CXX Support
> #
> # CONFIG_C99_BOOL8 is not set
> CONFIG_HAVE_CXX=y
> # CONFIG_CXX_NEWLONG is not set
>
> #
> # LLVM C++ Library (libcxx)
> #
> # CONFIG_LIBCXX is not set
>
> #
> # uClibc++ Standard C++ Library
> #
> # CONFIG_UCLIBCXX is not set
> # CONFIG_LIBDSP is not set
>
> #
> # Open Asymmetric Multi Processing
> #
> # CONFIG_OPENAMP is not set
>
> #
> # Application Configuration
> #
>
> #
> # Built-In Applications
> #
> CONFIG_BUILTIN_PROXY_STACKSIZE=1024
>
> #
> # CAN Utilities
> #
>
> #
> # Examples
> #
> # CONFIG_EXAMPLES_ABNTCODI is not set
> # CONFIG_EXAMPLES_ADXL372_TEST is not set
> # CONFIG_EXAMPLES_APA102 is not set
> # CONFIG_EXAMPLES_AUDIO_SOUND is not set
> # CONFIG_EXAMPLES_BATTERY is not set
> # CONFIG_EXAMPLES_SIXAXIS is not set
> # CONFIG_EXAMPLES_BRIDGE is not set
> # CONFIG_EXAMPLES_BUTTONS is not set
> # CONFIG_EXAMPLES_CALIB_UDELAY is not set
> # CONFIG_EXAMPLES_CCTYPE is not set
> # CONFIG_EXAMPLES_CHARGER is not set
> # CONFIG_EXAMPLES_CHAT is not set
> # CONFIG_EXAMPLES_CHRONO is not set
> # CONFIG_EXAMPLES_CONFIGDATA is not set
> # CONFIG_EXAMPLES_DHCPD is not set
> # CONFIG_EXAMPLES_DHTXX is not set
> # CONFIG_EXAMPLES_DISCOVER is not set
> # CONFIG_EXAMPLES_DSPTEST is not set
> # CONFIG_EXAMPLES_FTPC is not set
> # CONFIG_EXAMPLES_FTPD is not set
> # CONFIG_EXAMPLES_GPS is not set
> CONFIG_EXAMPLES_HELLO=y
> CONFIG_EXAMPLES_HELLO_PROGNAME="hello"
> CONFIG_EXAMPLES_HELLO_PRIORITY=100
> CONFIG_EXAMPLES_HELLO_STACKSIZE=2048
> # CONFIG_EXAMPLES_HELLOXX is not set
> # CONFIG_EXAMPLES_HIDKBD is not set
> # CONFIG_EXAMPLES_IGMP is not set
> # CONFIG_EXAMPLES_INA219 is not set
> # CONFIG_EXAMPLES_INA226 is not set
> # CONFIG_EXAMPLES_LSM330SPI_TEST is not set
> # CONFIG_EXAMPLES_LVGLDEMO is not set
> # CONFIG_EXAMPLES_MAX31855 is not set
> # CONFIG_EXAMPLES_MEDIA is not set
> # CONFIG_EXAMPLES_MLX90614 is not set
> # CONFIG_EXAMPLES_MM is not set
> # CONFIG_EXAMPLES_MODBUS is not set
> # CONFIG_EXAMPLES_MODBUSMASTER is not set
> # CONFIG_EXAMPLES_MOUNT is not set
> # CONFIG_EXAMPLES_NETTEST is not set
> # CONFIG_EXAMPLES_NULL is not set
> # CONFIG_EXAMPLES_NXDEMO is not set
> # CONFIG_EXAMPLES_OBD2 is not set
> # CONFIG_EXAMPLES_PCA9635 is not set
> # CONFIG_EXAMPLES_PDCURSES is not set
> # CONFIG_EXAMPLES_POSIXSPAWN is not set
> # CONFIG_EXAMPLES_POWERLED is not set
> # CONFIG_EXAMPLES_POWERMONITOR is not set
> # CONFIG_EXAMPLES_PPPD is not set
> # CONFIG_EXAMPLES_RFID_READUID is not set
> # CONFIG_EXAMPLES_RGBLED is not set
> # CONFIG_EXAMPLES_SENDMAIL is not set
> # CONFIG_EXAMPLES_SERIALBLASTER is not set
> # CONFIG_EXAMPLES_SERIALRX is not set
> # CONFIG_EXAMPLES_SERLOOP is not set
> # CONFIG_EXAMPLES_SLCD is not set
> # CONFIG_EXAMPLES_SMPS is not set
> # CONFIG_EXAMPLES_STAT is not set
> # CONFIG_EXAMPLES_TCPBLASTER is not set
> # CONFIG_EXAMPLES_TCPECHO is not set
> CONFIG_EXAMPLES_TELNETD=y
> # CONFIG_EXAMPLES_TELNETD_NOMAC is not set
> CONFIG_EXAMPLES_TELNETD_IPADDR=0x0a000002
> CONFIG_EXAMPLES_TELNETD_DRIPADDR=0x0a000001
> CONFIG_EXAMPLES_TELNETD_NETMASK=0xffffff00
> CONFIG_EXAMPLES_TELNETD_DAEMONPRIO=100
> CONFIG_EXAMPLES_TELNETD_DAEMONSTACKSIZE=2048
> CONFIG_EXAMPLES_TELNETD_CLIENTPRIO=100
> CONFIG_EXAMPLES_TELNETD_CLIENTSTACKSIZE=2048
> # CONFIG_EXAMPLES_TIFF is not set
> # CONFIG_EXAMPLES_TOUCHSCREEN is not set
> # CONFIG_EXAMPLES_UDPBLASTER is not set
> # CONFIG_EXAMPLES_UDP is not set
> # CONFIG_EXAMPLES_UID is not set
> # CONFIG_EXAMPLES_USBSERIAL is not set
> # CONFIG_EXAMPLES_USERFS is not set
> # CONFIG_EXAMPLES_WATCHDOG is not set
> # CONFIG_EXAMPLES_WEBSERVER is not set
> CONFIG_EXAMPLES_WGET=y
> CONFIG_EXAMPLES_WGET_URL="http://10.0.0.1/"
> # CONFIG_EXAMPLES_WGET_NOMAC is not set
> CONFIG_EXAMPLES_WGET_IPADDR=0x0a000002
> CONFIG_EXAMPLES_WGET_DRIPADDR=0x0a000001
> CONFIG_EXAMPLES_WGET_NETMASK=0xffffff00
> # CONFIG_EXAMPLES_XBC_TEST is not set
> # CONFIG_EXAMPLES_XMLRPC is not set
>
> #
> # File System Utilities
> #
> # CONFIG_FSUTILS_INIFILE is not set
> # CONFIG_FSUTILS_INIH is not set
> CONFIG_FSUTILS_MKFATFS=y
> # CONFIG_FSUTILS_PASSWD is not set
>
> #
> # GPS Utilities
> #
> # CONFIG_GPSUTILS_MINMEA_LIB is not set
>
> #
> # Graphics Support
> #
> # CONFIG_GRAPHICS_FT80X is not set
> # CONFIG_GRAPHICS_LVGL is not set
>
> #
> # NxWidgets
> #
>
> #
> # NxWM
> #
> # CONFIG_GRAPHICS_PDCURSES is not set
> # CONFIG_TIFF is not set
>
> #
> # Industrial Applications
> #
> # CONFIG_INDUSTRY_ABNT_CODI_LIB is not set
>
> #
> # Interpreters
> #
> # CONFIG_INTERPRETERS_BAS is not set
> CONFIG_INTERPRETERS_CHIBI_SCHEME=y
> # CONFIG_INTERPRETERS_FICL is not set
> # CONFIG_INTERPRETERS_MINIBASIC is not set
>
> #
> # FreeModBus
> #
> # CONFIG_MODBUS is not set
>
> #
> # Network Utilities
> #
> # CONFIG_NETUTILS_CHAT is not set
> # CONFIG_NETUTILS_CJSON is not set
> # CONFIG_NETUTILS_CODECS is not set
> # CONFIG_NETUTILS_DHCPC is not set
> # CONFIG_NETUTILS_DHCPD is not set
> # CONFIG_NETUTILS_DISCOVER is not set
> # CONFIG_NETUTILS_ESP8266 is not set
> # CONFIG_NETUTILS_FTPC is not set
> # CONFIG_NETUTILS_FTPD is not set
> # CONFIG_NETUTILS_LIBCURL4NX is not set
> CONFIG_NETUTILS_NETINIT=y
> CONFIG_NETINIT_NETLOCAL=y
> # CONFIG_NETINIT_DEBUG is not set
>
> #
> # IP Address Configuration
> #
>
> #
> # IPv4 Addresses
> #
> CONFIG_NETINIT_IPADDR=0x0a000002
> CONFIG_NETINIT_DRIPADDR=0x0a000001
> CONFIG_NETINIT_NETMASK=0xffffff00
> CONFIG_NETINIT_NOMAC=y
> CONFIG_NETINIT_SWMAC=y
> CONFIG_NETINIT_MACADDR_1=0xdeadbeef
> CONFIG_NETINIT_MACADDR_2=0x00e0
> CONFIG_NETUTILS_NETLIB=y
> CONFIG_NETUTILS_NETLIB_GENERICURLPARSER=y
> # CONFIG_NETUTILS_NTPCLIENT is not set
> CONFIG_NETUTILS_PING=y
> # CONFIG_NETUTILS_PPPD is not set
> # CONFIG_NETUTILS_SMTP is not set
> CONFIG_NETUTILS_TELNETC=y
> CONFIG_NETUTILS_TELNETD=y
> # CONFIG_NETUTILS_TFTPC is not set
> CONFIG_NETUTILS_WEBCLIENT=y
> CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
> CONFIG_WEBCLIENT_TIMEOUT=10
> # CONFIG_NETUTILS_WEBSERVER is not set
> # CONFIG_NETUTILS_XMLRPC is not set
>
> #
> # NSH Library
> #
> CONFIG_NSH_LIBRARY=y
> # CONFIG_NSH_MOTD is not set
>
> #
> # Command Line Configuration
> #
> CONFIG_NSH_PROMPT_STRING="nsh> "
> # CONFIG_NSH_READLINE is not set
> CONFIG_NSH_CLE=y
> CONFIG_NSH_LINELEN=80
> # CONFIG_NSH_DISABLE_SEMICOLON is not set
> # CONFIG_NSH_QUOTE is not set
> # CONFIG_NSH_CMDPARMS is not set
> CONFIG_NSH_MAXARGUMENTS=7
> # CONFIG_NSH_ARGCAT is not set
> CONFIG_NSH_NESTDEPTH=3
> # CONFIG_NSH_DISABLEBG is not set
> CONFIG_NSH_BUILTIN_APPS=y
>
> #
> # Disable Individual commands
> #
> # CONFIG_NSH_DISABLE_ADDROUTE is not set
> # CONFIG_NSH_DISABLE_ARP is not set
> # CONFIG_NSH_DISABLE_BASENAME is not set
> # CONFIG_NSH_DISABLE_CAT is not set
> # CONFIG_NSH_DISABLE_CD is not set
> # CONFIG_NSH_DISABLE_CP is not set
> # CONFIG_NSH_DISABLE_CMP is not set
> CONFIG_NSH_DISABLE_DATE=y
> # CONFIG_NSH_DISABLE_DD is not set
> # CONFIG_NSH_DISABLE_DF is not set
> # CONFIG_NSH_DISABLE_DELROUTE is not set
> # CONFIG_NSH_DISABLE_DIRNAME is not set
> # CONFIG_NSH_DISABLE_ECHO is not set
> # CONFIG_NSH_DISABLE_ENV is not set
> # CONFIG_NSH_DISABLE_EXEC is not set
> # CONFIG_NSH_DISABLE_EXIT is not set
> # CONFIG_NSH_DISABLE_EXPORT is not set
> # CONFIG_NSH_DISABLE_FREE is not set
> # CONFIG_NSH_DISABLE_GET is not set
> # CONFIG_NSH_DISABLE_HELP is not set
> # CONFIG_NSH_DISABLE_HEXDUMP is not set
> # CONFIG_NSH_DISABLE_IFCONFIG is not set
> # CONFIG_NSH_DISABLE_IFUPDOWN is not set
> # CONFIG_NSH_DISABLE_KILL is not set
> # CONFIG_NSH_DISABLE_LOSETUP is not set
> CONFIG_NSH_DISABLE_LOSMART=y
> # CONFIG_NSH_DISABLE_LS is not set
> # CONFIG_NSH_DISABLE_MB is not set
> # CONFIG_NSH_DISABLE_MKDIR is not set
> # CONFIG_NSH_DISABLE_MKRD is not set
> # CONFIG_NSH_DISABLE_MH is not set
> # CONFIG_NSH_DISABLE_MOUNT is not set
> # CONFIG_NSH_DISABLE_MV is not set
> # CONFIG_NSH_DISABLE_MW is not set
> CONFIG_NSH_DISABLE_PRINTF=y
> # CONFIG_NSH_DISABLE_PS is not set
> # CONFIG_NSH_DISABLE_PUT is not set
> # CONFIG_NSH_DISABLE_PWD is not set
> # CONFIG_NSH_DISABLE_RM is not set
> # CONFIG_NSH_DISABLE_RMDIR is not set
> # CONFIG_NSH_DISABLE_ROUTE is not set
> # CONFIG_NSH_DISABLE_SET is not set
> # CONFIG_NSH_DISABLE_SH is not set
> # CONFIG_NSH_DISABLE_SLEEP is not set
> # CONFIG_NSH_DISABLE_TIME is not set
> # CONFIG_NSH_DISABLE_TEST is not set
> # CONFIG_NSH_DISABLE_TELNETD is not set
> CONFIG_NSH_DISABLE_TRUNCATE=y
> # CONFIG_NSH_DISABLE_UMOUNT is not set
> # CONFIG_NSH_DISABLE_UNAME is not set
> # CONFIG_NSH_DISABLE_UNSET is not set
> # CONFIG_NSH_DISABLE_USLEEP is not set
> # CONFIG_NSH_DISABLE_WGET is not set
> # CONFIG_NSH_DISABLE_XD is not set
> CONFIG_NSH_MMCSDMINOR=0
> CONFIG_NSH_MMCSDSLOTNO=0
>
> #
> # Configure Command Options
> #
> # CONFIG_NSH_VARS is not set
> # CONFIG_NSH_CMDOPT_DD_STATS is not set
> CONFIG_NSH_CODECS_BUFSIZE=128
> # CONFIG_NSH_CMDOPT_HEXDUMP is not set
> CONFIG_NSH_PROC_MOUNTPOINT="/proc"
> CONFIG_NSH_FILEIOSIZE=512
>
> #
> # Scripting Support
> #
> # CONFIG_NSH_DISABLESCRIPT is not set
> # CONFIG_NSH_DISABLE_ITEF is not set
> # CONFIG_NSH_DISABLE_LOOPS is not set
>
> #
> # Console Configuration
> #
> CONFIG_NSH_CONSOLE=y
>
> #
> # USB Device Trace Support
> #
> # CONFIG_NSH_USBDEV_TRACE is not set
> CONFIG_NSH_ARCHINIT=y
>
> #
> # Networking Configuration
> #
> CONFIG_NSH_NETINIT=y
>
> #
> # Telnet Configuration
> #
> CONFIG_NSH_TELNET=y
> CONFIG_NSH_TELNETD_PORT=23
> CONFIG_NSH_TELNETD_DAEMONPRIO=100
> CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
> CONFIG_NSH_TELNETD_CLIENTPRIO=100
> CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
> CONFIG_NSH_IOBUFFER_SIZE=512
> # CONFIG_NSH_LOGIN is not set
> # CONFIG_NSH_CONSOLE_LOGIN is not set
> # CONFIG_NSH_TELNET_LOGIN is not set
>
> #
> # Platform-specific Support
> #
> # CONFIG_PLATFORM_CONFIGDATA is not set
> CONFIG_HAVE_CXXINITIALIZE=y
>
> #
> # System Libraries and NSH Add-Ons
> #
> CONFIG_SYSTEM_CLE=y
> # CONFIG_SYSTEM_COLOR_CLE is not set
> # CONFIG_SYSTEM_CLE_CMD_HISTORY is not set
> CONFIG_SYSTEM_CLE_DEBUGLEVEL=0
> # CONFIG_SYSTEM_CUTERM is not set
> # CONFIG_SYSTEM_DHCPC_RENEW is not set
> # CONFIG_SYSTEM_EMBEDLOG is not set
> # CONFIG_SYSTEM_HEX2BIN is not set
> # CONFIG_SYSTEM_HEXED is not set
> # CONFIG_SYSTEM_NETDB is not set
> CONFIG_SYSTEM_NSH=y
> CONFIG_SYSTEM_NSH_PRIORITY=100
> CONFIG_SYSTEM_NSH_STACKSIZE=2048
> CONFIG_SYSTEM_NSH_PROGNAME="nsh"
> CONFIG_SYSTEM_NSH_CXXINITIALIZE=y
> # CONFIG_SYSTEM_NTPC is not set
> CONFIG_SYSTEM_PING=y
> CONFIG_SYSTEM_PING_PROGNAME="ping"
> CONFIG_SYSTEM_PING_PRIORITY=100
> CONFIG_SYSTEM_PING_STACKSIZE=2048
> # CONFIG_SYSTEM_POPEN is not set
> # CONFIG_SYSTEM_RAMTEST is not set
> CONFIG_READLINE_HAVE_EXTMATCH=y
> CONFIG_SYSTEM_READLINE=y
> CONFIG_READLINE_ECHO=y
> # CONFIG_READLINE_TABCOMPLETION is not set
> # CONFIG_READLINE_CMD_HISTORY is not set
> # CONFIG_SYSTEM_SETLOGMASK is not set
> # CONFIG_SYSTEM_SYSTEM is not set
> # CONFIG_SYSTEM_TEE is not set
> # CONFIG_SYSTEM_TELNET_CHATD is not set
> # CONFIG_SYSTEM_TELNET_CLIENT is not set
> CONFIG_SYSTEM_TERMCURSES=y
> CONFIG_SYSTEM_TERMCURSES_VT100=y
> CONFIG_SYSTEM_TERMCURSES_VT100_OSX_ALT_CODES=y
> # CONFIG_SYSTEM_TERMCURSES_DEBUG_KEYCODES is not set
> # CONFIG_SYSTEM_TERMCURSES_INCLUDE_TERMINFO_NAME is not set
> # CONFIG_SYSTEM_UBLOXMODEM is not set
> CONFIG_SYSTEM_VI=y
> CONFIG_SYSTEM_VI_COLS=64
> CONFIG_SYSTEM_VI_ROWS=16
> CONFIG_SYSTEM_VI_DEBUGLEVEL=0
> CONFIG_SYSTEM_VI_STACKSIZE=2048
> CONFIG_SYSTEM_VI_PRIORITY=100
> CONFIG_SYSTEM_VI_INCLUDE_COMMAND_REPEAT=y
> # CONFIG_SYSTEM_ZMODEM is not set
>
> #
> # Testing
> #
> # CONFIG_TESTING_CXXTEST is not set
> # CONFIG_TESTING_FSTEST is not set
> # CONFIG_TESTING_GETPRIME is not set
> # CONFIG_TESTING_NXFFS is not set
> # CONFIG_TESTING_OSTEST is not set
> # CONFIG_TESTING_SCANFTEST is not set
> # CONFIG_TESTING_SMART is not set
> # CONFIG_TESTING_SMART_TEST is not set
> # CONFIG_TESTING_UNITY is not set
>
> #
> # Wireless Libraries and NSH Add-Ons
> #
>
> #
> # Bluetooth applications
> #
> # CONFIG_BTSAK is not set
>
> #
> # IEEE 802.15.4 applications
> #
> # CONFIG_IEEE802154_I8SAK is not set
> # CONFIG_IEEE802154_LIBMAC is not set
> # CONFIG_IEEE802154_LIBUTILS is not set
>
On Thu, Jan 9, 2020 at 5:47 AM Gregory Nutt <sp...@gmail.com> wrote:
>
> > I cant see any config !
> >
> > heck what selects those options and why they are not selected
> > NETDEVICES
> > ARCH_HAVE_PHY
> >
> dev@nuttx.apache.org scrapes more attachments. You could change it to
> config.txt and it would come through.
>
--
Adam Feuer <ad...@starcat.io>
Re: Question about savedefconfig warnings
Posted by Gregory Nutt <sp...@gmail.com>.
> I cant see any config !
>
> heck what selects those options and why they are not selected
> NETDEVICES
> ARCH_HAVE_PHY
>
dev@nuttx.apache.org scrapes more attachments. You could change it to
config.txt and it would come through.
Re: Question about savedefconfig warnings
Posted by Alin Jerpelea <je...@gmail.com>.
I cant see any config !
heck what selects those options and why they are not selected
NETDEVICES
ARCH_HAVE_PHY
On Thu, Jan 9, 2020 at 8:23 AM Adam Feuer <ad...@starcat.io> wrote:
> I forgot to attach the config file. Here it is.
>
> -adam
>
> On Wed, Jan 8, 2020 at 7:57 PM Adam Feuer <ad...@starcat.io> wrote:
>
>> Hi,
>>
>> I'm trying to save a defconfig, so I can put together an example for USB
>> over Ethernet example I'm working on. It's working on the SAMA5D36-Xplained
>> via USB 2.0 HS, by the way– very nice.
>>
>> When I do 'make savedefconfig' I get the following message twice:
>>
>> warning: (IMXRT_ENET && TIVA_PHY_INTERRUPTS && ARCH_BOARD_SAMA5D3X_EK &&
>> ARCH_BOARD_SAMA5D3_XPLAINED && ARCH_BOARD_SAMA5D4_EK && ARCH_BOARD_SAM4EEK
>> && ARCH_BOARD_SAME70_XPLAINED && ARCH_BOARD_SAMV71_XULT &&
>> BOARD_CUSTOM_INTERRUPT) selects ARCH_PHY_INTERRUPT which has unmet direct
>> dependencies (NETDEVICES && ARCH_HAVE_PHY)
>>
>> What's going on? How do I find out what's causing this and how do I make
>> it go away? It's not causing a problem with the compile, that compiles and
>> runs ok.
>>
>> cheers
>> adam
>> --
>> Adam Feuer <ad...@starcat.io>
>>
>
>
> --
> Adam Feuer <ad...@starcat.io>
>
Re: Question about savedefconfig warnings
Posted by Adam Feuer <ad...@starcat.io>.
I forgot to attach the config file. Here it is.
-adam
On Wed, Jan 8, 2020 at 7:57 PM Adam Feuer <ad...@starcat.io> wrote:
> Hi,
>
> I'm trying to save a defconfig, so I can put together an example for USB
> over Ethernet example I'm working on. It's working on the SAMA5D36-Xplained
> via USB 2.0 HS, by the way– very nice.
>
> When I do 'make savedefconfig' I get the following message twice:
>
> warning: (IMXRT_ENET && TIVA_PHY_INTERRUPTS && ARCH_BOARD_SAMA5D3X_EK &&
> ARCH_BOARD_SAMA5D3_XPLAINED && ARCH_BOARD_SAMA5D4_EK && ARCH_BOARD_SAM4EEK
> && ARCH_BOARD_SAME70_XPLAINED && ARCH_BOARD_SAMV71_XULT &&
> BOARD_CUSTOM_INTERRUPT) selects ARCH_PHY_INTERRUPT which has unmet direct
> dependencies (NETDEVICES && ARCH_HAVE_PHY)
>
> What's going on? How do I find out what's causing this and how do I make
> it go away? It's not causing a problem with the compile, that compiles and
> runs ok.
>
> cheers
> adam
> --
> Adam Feuer <ad...@starcat.io>
>
--
Adam Feuer <ad...@starcat.io>
Re: Question about savedefconfig warnings
Posted by Adam Feuer <ad...@starcat.io>.
Thanks. I didn't have to use the imply, but it's good to know about.
cheers
adam
On Thu, Jan 9, 2020 at 1:05 PM Gregory Nutt <sp...@gmail.com> wrote:
> > The "imply BAZ" method seems like a way to have a permanent solution to
> > this.
> >
> > I'll try to track this down. If I do that, is it something that can would
> > be accepted as part of a PR?
>
> I don't see why not. 'imply' is only available in the newest version of
> Kconfig-frontends so it is possible it could break something for people
> using old kconfig-frontends.
>
> But the newest version is several years old (it is no longer being
> supported), so the risk is low
>
> Greg
>
>
--
Adam Feuer <ad...@starcat.io>
Re: Question about savedefconfig warnings
Posted by Gregory Nutt <sp...@gmail.com>.
> The "imply BAZ" method seems like a way to have a permanent solution to
> this.
>
> I'll try to track this down. If I do that, is it something that can would
> be accepted as part of a PR?
I don't see why not. 'imply' is only available in the newest version of
Kconfig-frontends so it is possible it could break something for people
using old kconfig-frontends.
But the newest version is several years old (it is no longer being
supported), so the risk is low
Greg
Re: Question about savedefconfig warnings
Posted by Adam Feuer <ad...@starcat.io>.
The Kconfig for ARCH_BOARD_SAMA5D3_XPLAINED had this:
select ARCH_PHY_INTERRUPT if NETDEVICES
>
Since now NETDEVICES can include CDC ECM Ethernet over USB which does not
have a PHY interrupt, I solved the conflict like this:
select ARCH_PHY_INTERRUPT if NETDEVICES && (SAMA5_EMACA || SAMA5_EMAC0 ||
> SAMA5_EMAC1 || SAMA5_GMAC)
>
Thanks for the help!
cheers
adam
On Thu, Jan 9, 2020 at 8:43 AM Adam Feuer <ad...@starcat.io> wrote:
> The "imply BAZ" method seems like a way to have a permanent solution to
> this.
>
> I'll try to track this down. If I do that, is it something that can would
> be accepted as part of a PR?
>
> cheers
> adam
>
> On Thu, Jan 9, 2020 at 6:10 AM Gregory Nutt <sp...@gmail.com> wrote:
>
>>
>> >> This is an error in the Kconfig files. This one is complex because a
>> >> lot of settings are involved. This kind of error occurs because you
>> >> are auto-selecting a setting that has dependencies that are not
>> >> selected. A simple example would be like
>> >
>> > config FOO
>> > bool "Foo"
>> > depends on BAR
>> >
>> > config BAZ
>> > bool "Baz"
>> > select FOO
>> >
>> > That causes the error if BAZ is not selected. Fixes:
>> >
>> > * Temporary workaround: Select BAR in the configuration
>> > * Select BAR before FOO when BAZ is selected
>> > * May BAZ depend on BAR too
>> > * Select FOO conditional 'select FOO if BAR'
>> >
>> There is one more option (at least). You can use 'imply FOO' instead of
>> 'select FOO'. Per the Kconfig-frontends documentation:
>>
>> - weak reverse dependencies: "imply" <symbol> ["if" <expr>]
>> This is similar to "select" as it enforces a lower limit on another
>> symbol except that the "implied" symbol's value may still be set
>> to n
>> from a direct dependency or with a visible prompt.
>>
>> Given the following example:
>>
>> config FOO
>> tristate
>> imply BAZ
>>
>> config BAZ
>> tristate
>> depends on BAR
>>
>> The following values are possible:
>>
>> FOO BAR BAZ's default choice for BAZ
>> --- --- ------------- --------------
>> n y n N/m/y
>> m y m M/y/n
>> y y y Y/n
>> y n * N
>>
>> This is useful e.g. with multiple drivers that want to indicate
>> their
>> ability to hook into a secondary subsystem while allowing the user
>> to
>> configure that subsystem out without also having to unset these
>> drivers.
>>
>> Greg
>>
>>
>
> --
> Adam Feuer <ad...@starcat.io>
>
--
Adam Feuer <ad...@starcat.io>
Re: Question about savedefconfig warnings
Posted by Adam Feuer <ad...@starcat.io>.
The "imply BAZ" method seems like a way to have a permanent solution to
this.
I'll try to track this down. If I do that, is it something that can would
be accepted as part of a PR?
cheers
adam
On Thu, Jan 9, 2020 at 6:10 AM Gregory Nutt <sp...@gmail.com> wrote:
>
> >> This is an error in the Kconfig files. This one is complex because a
> >> lot of settings are involved. This kind of error occurs because you
> >> are auto-selecting a setting that has dependencies that are not
> >> selected. A simple example would be like
> >
> > config FOO
> > bool "Foo"
> > depends on BAR
> >
> > config BAZ
> > bool "Baz"
> > select FOO
> >
> > That causes the error if BAZ is not selected. Fixes:
> >
> > * Temporary workaround: Select BAR in the configuration
> > * Select BAR before FOO when BAZ is selected
> > * May BAZ depend on BAR too
> > * Select FOO conditional 'select FOO if BAR'
> >
> There is one more option (at least). You can use 'imply FOO' instead of
> 'select FOO'. Per the Kconfig-frontends documentation:
>
> - weak reverse dependencies: "imply" <symbol> ["if" <expr>]
> This is similar to "select" as it enforces a lower limit on another
> symbol except that the "implied" symbol's value may still be set to
> n
> from a direct dependency or with a visible prompt.
>
> Given the following example:
>
> config FOO
> tristate
> imply BAZ
>
> config BAZ
> tristate
> depends on BAR
>
> The following values are possible:
>
> FOO BAR BAZ's default choice for BAZ
> --- --- ------------- --------------
> n y n N/m/y
> m y m M/y/n
> y y y Y/n
> y n * N
>
> This is useful e.g. with multiple drivers that want to indicate
> their
> ability to hook into a secondary subsystem while allowing the user
> to
> configure that subsystem out without also having to unset these
> drivers.
>
> Greg
>
>
--
Adam Feuer <ad...@starcat.io>
Re: Question about savedefconfig warnings
Posted by Gregory Nutt <sp...@gmail.com>.
>> This is an error in the Kconfig files. This one is complex because a
>> lot of settings are involved. This kind of error occurs because you
>> are auto-selecting a setting that has dependencies that are not
>> selected. A simple example would be like
>
> config FOO
> bool "Foo"
> depends on BAR
>
> config BAZ
> bool "Baz"
> select FOO
>
> That causes the error if BAZ is not selected. Fixes:
>
> * Temporary workaround: Select BAR in the configuration
> * Select BAR before FOO when BAZ is selected
> * May BAZ depend on BAR too
> * Select FOO conditional 'select FOO if BAR'
>
There is one more option (at least). You can use 'imply FOO' instead of
'select FOO'. Per the Kconfig-frontends documentation:
- weak reverse dependencies: "imply" <symbol> ["if" <expr>]
This is similar to "select" as it enforces a lower limit on another
symbol except that the "implied" symbol's value may still be set to n
from a direct dependency or with a visible prompt.
Given the following example:
config FOO
tristate
imply BAZ
config BAZ
tristate
depends on BAR
The following values are possible:
FOO BAR BAZ's default choice for BAZ
--- --- ------------- --------------
n y n N/m/y
m y m M/y/n
y y y Y/n
y n * N
This is useful e.g. with multiple drivers that want to indicate their
ability to hook into a secondary subsystem while allowing the user to
configure that subsystem out without also having to unset these
drivers.
Greg
Re: Question about savedefconfig warnings
Posted by Gregory Nutt <sp...@gmail.com>.
> When I do 'make savedefconfig' I get the following message twice:
>
> warning: (IMXRT_ENET && TIVA_PHY_INTERRUPTS && ARCH_BOARD_SAMA5D3X_EK &&
> ARCH_BOARD_SAMA5D3_XPLAINED && ARCH_BOARD_SAMA5D4_EK && ARCH_BOARD_SAM4EEK
> && ARCH_BOARD_SAME70_XPLAINED && ARCH_BOARD_SAMV71_XULT &&
> BOARD_CUSTOM_INTERRUPT) selects ARCH_PHY_INTERRUPT which has unmet direct
> dependencies (NETDEVICES && ARCH_HAVE_PHY)
>
> What's going on? How do I find out what's causing this and how do I make it
> go away? It's not causing a problem with the compile, that compiles and
> runs ok.
This is an error in the Kconfig files. This one is complex because a
lot of settings are involved. This kind of error occurs because you are
auto-selecting a setting that has dependencies that are not selected. A
simple example would be like
config FOO
bool "Foo"
depends on BAR
config BAZ
bool "Baz"
select FOO
That causes the error if BAZ is not selected. Fixes:
* Temporary workaround: Select BAR in the configuration
* Select BAR before FOO when BAZ is selected
* May BAZ depend on BAR too
* Select FOO conditional 'select FOO if BAR'
Greg