You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Alex <al...@j2anywhere.com> on 2013/04/10 18:43:15 UTC
4.0.1 Installation on CentOS 6.4 Questions
I am currently looking at installating CS 4.0.1 onto a single system
running CentOS 6.4.
The installation of the management server was pretty straight forward,
however using either the configuration wizard or the web based console I
am not able to add a host to the server. Ideally I would like to run
everything of a single system, which seems to be supported.
Here is what I did so far:
Completed the steps from the installation guide until steps 5.1 from
which point I tried using the configuration wizard to complete the
installation. This failed on the "Adding host" step. I then tried adding
the host by-passing the configuration wizard, but that failed as well.
Reading further in the manual in section 8 I came across the network
configuration. Some of this seemed to have already been completed by the
previous installation steps.
After applying the network configuration I lost internet access and was
still not able to add a hosts.
Below is my configuration and the content of some of the log files I
found. I have tried following the installation guide several times now,
each time starting with a clean installation of CentOS, but always got
stuck at this point.
[root@panda ~]# for i in $(ls -1
/etc/sysconfig/network-scripts/ifcfg-eth0*);do echo $i;cat $i;echo
"=================================";done
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
UUID=60452d20-04fd-480f-9d73-ed980e4ed223
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=dhcp
HWADDR=50:E5:49:E1:7D:12
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
=================================
/etc/sysconfig/network-scripts/ifcfg-eth0.100
DEVICE=eth0.100
ONBOOT=yes
HOTPLUG=no
BOOTPROTO=none
TYPE=Ethernet
VLAN=yes
IPADDR=192.168.0.7
GATEWAY=192.168.0.1
NETMASK=255.255.0.0
=================================
/etc/sysconfig/network-scripts/ifcfg-eth0.200
DEVICE=eth0.200
ONBOOT=yes
HOTPLUG=no
BOOTPROTO=none
TYPE=Ethernet
VLAN=yes
BRIDGE=cloudbr0
=================================
/etc/sysconfig/network-scripts/ifcfg-eth0.300
DEVICE=eth0.300
ONBOOT=yes
HOTPLUG=no
BOOTPROTO=none
TYPE=Ethernet
VLAN=yes
BRIDGE=cloudbr1
=================================
cat /var/log/libvirt/libvirtd.log
2013-04-09 18:53:05.248+0000: 5764: info : libvirt version: 0.10.2,
package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
2013-04-09 18:53:05.248+0000: 5764: error :
virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
'/etc/pki/CA/cacert.pem': No such file or directory
2013-04-09 18:53:35.851+0000: 5800: info : libvirt version: 0.10.2,
package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
2013-04-09 18:53:35.851+0000: 5800: error :
virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
'/etc/pki/CA/cacert.pem': No such file or directory
2013-04-10 16:07:49.156+0000: 4018: info : libvirt version: 0.10.2,
package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
2013-04-10 16:07:49.156+0000: 4018: error :
virStoragePoolDefParseXML:774 : XML error: missing pool source name element
cat /var/log/libvirt/libvirtd.log
2013-04-09 18:53:05.248+0000: 5764: info : libvirt version: 0.10.2,
package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
2013-04-09 18:53:05.248+0000: 5764: error :
virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
'/etc/pki/CA/cacert.pem': No such file or directory
2013-04-09 18:53:35.851+0000: 5800: info : libvirt version: 0.10.2,
package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
2013-04-09 18:53:35.851+0000: 5800: error :
virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
'/etc/pki/CA/cacert.pem': No such file or directory
2013-04-10 16:07:49.156+0000: 4018: info : libvirt version: 0.10.2,
package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
2013-04-10 16:07:49.156+0000: 4018: error :
virStoragePoolDefParseXML:774 : XML error: missing pool source name element
[root@panda ~]# cat /var/log/cloud/agent/agent.log
2013-04-11 00:07:33,936 INFO [utils.component.ComponentLocator]
(main:null) Unable to find components.xml
2013-04-11 00:07:33,963 INFO [utils.component.ComponentLocator]
(main:null) Skipping configuration using components.xml
2013-04-11 00:07:33,963 INFO [cloud.agent.AgentShell] (main:null)
Implementation Version is 4.0.1.20130201075054
2013-04-11 00:07:33,964 INFO [cloud.agent.AgentShell] (main:null)
agent.properties found at /etc/cloud/agent/agent.properties
2013-04-11 00:07:34,035 INFO [cloud.agent.AgentShell] (main:null)
Defaulting to using properties file for storage
2013-04-11 00:07:34,037 INFO [cloud.agent.AgentShell] (main:null)
Defaulting to the constant time backoff algorithm
2013-04-11 00:07:34,442 INFO [cloud.agent.Agent] (main:null) id is
2013-04-11 00:07:34,549 ERROR [cloud.resource.ServerResourceBase]
(main:null) Nics are not configured!
2013-04-11 00:07:34,554 INFO [cloud.resource.ServerResourceBase]
(main:null) Designating private to be nic eth0.100
2013-04-11 00:07:34,891 INFO
[resource.virtualnetwork.VirtualRoutingResource] (main:null)
VirtualRoutingResource _scriptDir to use: scripts/network/domr/kvm
2013-04-11 00:07:37,760 INFO [kvm.resource.LibvirtComputingResource]
(main:null) No libvirt.vif.driver specififed. Defaults to BridgeVifDriver.
2013-04-11 00:07:38,244 INFO [cloud.agent.Agent] (main:null) Agent [id
= new : type = LibvirtComputingResource : zone = default : pod = default
: workers = 5 : host = localhost : port = 8250
2013-04-11 00:07:38,249 INFO [utils.nio.NioClient]
(Agent-Selector:null) Connecting to localhost:8250
2013-04-11 00:07:38,316 ERROR [utils.nio.NioConnection]
(Agent-Selector:null) Unable to connect to remote
2013-04-11 00:07:43,322 INFO [utils.nio.NioClient]
(Agent-Selector:null) Connecting to localhost:8250
2013-04-11 00:07:43,323 ERROR [utils.nio.NioConnection]
(Agent-Selector:null) Unable to connect to remote
2013-04-11 00:07:48,325 INFO [utils.nio.NioClient]
(Agent-Selector:null) Connecting to localhost:8250
2013-04-11 00:07:48,947 INFO [utils.nio.NioClient]
(Agent-Selector:null) SSL: Handshake done
2013-04-11 00:07:49,285 ERROR [kvm.storage.LibvirtStorageAdaptor]
(Agent-Handler-1:null) org.libvirt.LibvirtException: XML error: missing
pool source name element
2013-04-11 00:07:49,286 WARN [utils.nio.Task] (Agent-Handler-1:null)
Caught the following exception but pushing on
java.lang.NullPointerException
at
com.cloud.hypervisor.kvm.storage.LibvirtStorageAdaptor.createStoragePool(LibvirtStorageAdaptor.java:462)
at
com.cloud.hypervisor.kvm.storage.KVMStoragePoolManager.createStoragePool(KVMStoragePoolManager.java:57)
at
com.cloud.hypervisor.kvm.resource.LibvirtComputingResource.initialize(LibvirtComputingResource.java:3271)
at com.cloud.agent.Agent.sendStartup(Agent.java:320)
at com.cloud.agent.Agent$ServerHandler.doTask(Agent.java:850)
at com.cloud.utils.nio.Task.run(Task.java:83)
at
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:722)
cat /var/log/cloud/management/catalina.out
Apr 11, 2013 12:07:48 AM org.apache.coyote.http11.Http11NioProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8080
Apr 11, 2013 12:07:48 AM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:20400
Apr 11, 2013 12:07:48 AM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/37 config=null
Apr 11, 2013 12:07:48 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina7080
Apr 11, 2013 12:07:48 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.24
Apr 11, 2013 12:07:48 AM org.apache.catalina.startup.HostConfig
deployDirectory
INFO: Deploying web application directory awsapi
INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:) We are
good, no orphan management server msid in host table is found
INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:) Found 1
inactive management server node based on timestamp
INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:)
management server node msid: 88945717247250, name:
panda.home.j2anywhere.com, service ip: 192.168.0.6, version:
4.0.1.20130201075054
INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:) Trying
to connect to 192.168.0.6
Log4j configuration from : /usr/share/cloud/management/conf/log4j-cloud.xml
Apr 11, 2013 12:07:50 AM org.apache.coyote.http11.Http11NioProtocol start
INFO: Starting Coyote HTTP/1.1 on http-7080
Apr 11, 2013 12:07:50 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 14042 ms
ERROR [cloud.alert.AlertManagerImpl] (Cluster-Notification-1:) Problem
sending email alert
java.lang.NullPointerException
at
com.cloud.alert.AlertManagerImpl$EmailAlert.sendAlert(AlertManagerImpl.java:776)
at
com.cloud.alert.AlertManagerImpl.sendAlert(AlertManagerImpl.java:268)
at
com.cloud.alert.ClusterAlertAdapter.onClusterNodeJoined(ClusterAlertAdapter.java:73)
at
com.cloud.alert.ClusterAlertAdapter.onClusterAlert(ClusterAlertAdapter.java:52)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at
com.cloud.utils.events.SubscriptionMgr$SubscriberInfo.execute(SubscriptionMgr.java:147)
at
com.cloud.utils.events.SubscriptionMgr.notifySubscribers(SubscriptionMgr.java:77)
at
com.cloud.cluster.ClusterManagerImpl.notifyNodeJoined(ClusterManagerImpl.java:650)
at
com.cloud.cluster.ClusterManagerImpl$5.run(ClusterManagerImpl.java:871)
at
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
at java.util.concurrent.FutureTask.run(FutureTask.java:166)
at
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:722)
WARN [cloud.cluster.ClusterManagerImpl] (Cluster-Notification-1:)
Notifying management server join event took 285 ms
INFO [cloud.resource.ResourceManagerImpl] (catalina-exec-21:) Trying to
add a new host at http://192.168.0.6 in data center 1
INFO [utils.ssh.SSHCmdHelper] (catalina-exec-21:) Timeout while waiting
for data from peer.
INFO [utils.ssh.SSHCmdHelper] (catalina-exec-21:) Timeout while waiting
for data from peer.
Re: 4.0.1 Installation on CentOS 6.4 Questions
Posted by Alexander Hartner <al...@j2anywhere.com>.
Thanks for taking a look. Going to try again with 4.0.2 once it is released.
On 17/04/2013, at 1:30 AM, David Nalley <da...@gnsa.us> wrote:
> On Tue, Apr 16, 2013 at 1:20 PM, David Ortiz <dp...@outlook.com> wrote:
>> Alex,
>> I was trying to do the same thing, and ended up having to downgrade the OS to CentOS 6.3 to add a host to Cloudstack. I did notice when I was trying to investigate that there is a JIRA ticket open to add CentOS 6.4 support for installation at https://issues.apache.org/jira/browse/CLOUDSTACK-1642. From the look of things it is not being added until future releases though. I also had the same issue with following the network setup and no longer having internet access, but was able to do a basic network installation just leaving it as a flat network without configuring the vlans.
>> Hope this helps, David Ortiz
>>
>
> Alex, David:
>
> This should be fixed in 4.0.2, which is imminent.
> Hiraoki-san fixed this well and if you really want 4.0.1 on EL6.4,
> look at his patch to utilities.py, it should be easy to fix even in
> 4.0.1 on your installed system.
>
> https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;a=blobdiff;f=python/lib/cloudutils/utilities.py;h=b7c2a82dcbec8e0ad134bd94d8d8c958f2dd71a4;hp=df09099a07fdd346d14d3835fc2aaa8b9450e34f;hb=c412a7a;hpb=c0d2c1b958e98460ec1fea7eb378d4ca4f35a052
>
> --David
Re: 4.0.1 Installation on CentOS 6.4 Questions
Posted by David Nalley <da...@gnsa.us>.
On Tue, Apr 16, 2013 at 1:20 PM, David Ortiz <dp...@outlook.com> wrote:
> Alex,
> I was trying to do the same thing, and ended up having to downgrade the OS to CentOS 6.3 to add a host to Cloudstack. I did notice when I was trying to investigate that there is a JIRA ticket open to add CentOS 6.4 support for installation at https://issues.apache.org/jira/browse/CLOUDSTACK-1642. From the look of things it is not being added until future releases though. I also had the same issue with following the network setup and no longer having internet access, but was able to do a basic network installation just leaving it as a flat network without configuring the vlans.
> Hope this helps, David Ortiz
>
Alex, David:
This should be fixed in 4.0.2, which is imminent.
Hiraoki-san fixed this well and if you really want 4.0.1 on EL6.4,
look at his patch to utilities.py, it should be easy to fix even in
4.0.1 on your installed system.
https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;a=blobdiff;f=python/lib/cloudutils/utilities.py;h=b7c2a82dcbec8e0ad134bd94d8d8c958f2dd71a4;hp=df09099a07fdd346d14d3835fc2aaa8b9450e34f;hb=c412a7a;hpb=c0d2c1b958e98460ec1fea7eb378d4ca4f35a052
--David
RE: 4.0.1 Installation on CentOS 6.4 Questions
Posted by David Ortiz <dp...@outlook.com>.
Alex,
I was trying to do the same thing, and ended up having to downgrade the OS to CentOS 6.3 to add a host to Cloudstack. I did notice when I was trying to investigate that there is a JIRA ticket open to add CentOS 6.4 support for installation at https://issues.apache.org/jira/browse/CLOUDSTACK-1642. From the look of things it is not being added until future releases though. I also had the same issue with following the network setup and no longer having internet access, but was able to do a basic network installation just leaving it as a flat network without configuring the vlans.
Hope this helps, David Ortiz
> Date: Thu, 11 Apr 2013 00:43:15 +0800
> From: alex@j2anywhere.com
> To: users@cloudstack.apache.org
> Subject: 4.0.1 Installation on CentOS 6.4 Questions
>
> I am currently looking at installating CS 4.0.1 onto a single system
> running CentOS 6.4.
>
> The installation of the management server was pretty straight forward,
> however using either the configuration wizard or the web based console I
> am not able to add a host to the server. Ideally I would like to run
> everything of a single system, which seems to be supported.
>
> Here is what I did so far:
>
> Completed the steps from the installation guide until steps 5.1 from
> which point I tried using the configuration wizard to complete the
> installation. This failed on the "Adding host" step. I then tried adding
> the host by-passing the configuration wizard, but that failed as well.
>
> Reading further in the manual in section 8 I came across the network
> configuration. Some of this seemed to have already been completed by the
> previous installation steps.
>
> After applying the network configuration I lost internet access and was
> still not able to add a hosts.
>
> Below is my configuration and the content of some of the log files I
> found. I have tried following the installation guide several times now,
> each time starting with a clean installation of CentOS, but always got
> stuck at this point.
>
> [root@panda ~]# for i in $(ls -1
> /etc/sysconfig/network-scripts/ifcfg-eth0*);do echo $i;cat $i;echo
> "=================================";done
> /etc/sysconfig/network-scripts/ifcfg-eth0
> DEVICE=eth0
> TYPE=Ethernet
> UUID=60452d20-04fd-480f-9d73-ed980e4ed223
> ONBOOT=yes
> NM_CONTROLLED=yes
> BOOTPROTO=dhcp
> HWADDR=50:E5:49:E1:7D:12
> DEFROUTE=yes
> PEERDNS=yes
> PEERROUTES=yes
> IPV4_FAILURE_FATAL=yes
> IPV6INIT=no
> NAME="System eth0"
> =================================
> /etc/sysconfig/network-scripts/ifcfg-eth0.100
> DEVICE=eth0.100
> ONBOOT=yes
> HOTPLUG=no
> BOOTPROTO=none
> TYPE=Ethernet
> VLAN=yes
> IPADDR=192.168.0.7
> GATEWAY=192.168.0.1
> NETMASK=255.255.0.0
> =================================
> /etc/sysconfig/network-scripts/ifcfg-eth0.200
> DEVICE=eth0.200
> ONBOOT=yes
> HOTPLUG=no
> BOOTPROTO=none
> TYPE=Ethernet
> VLAN=yes
> BRIDGE=cloudbr0
> =================================
> /etc/sysconfig/network-scripts/ifcfg-eth0.300
> DEVICE=eth0.300
> ONBOOT=yes
> HOTPLUG=no
> BOOTPROTO=none
> TYPE=Ethernet
> VLAN=yes
> BRIDGE=cloudbr1
> =================================
>
> cat /var/log/libvirt/libvirtd.log
> 2013-04-09 18:53:05.248+0000: 5764: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-09 18:53:05.248+0000: 5764: error :
> virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
> '/etc/pki/CA/cacert.pem': No such file or directory
> 2013-04-09 18:53:35.851+0000: 5800: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-09 18:53:35.851+0000: 5800: error :
> virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
> '/etc/pki/CA/cacert.pem': No such file or directory
> 2013-04-10 16:07:49.156+0000: 4018: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-10 16:07:49.156+0000: 4018: error :
> virStoragePoolDefParseXML:774 : XML error: missing pool source name element
>
> cat /var/log/libvirt/libvirtd.log
> 2013-04-09 18:53:05.248+0000: 5764: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-09 18:53:05.248+0000: 5764: error :
> virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
> '/etc/pki/CA/cacert.pem': No such file or directory
> 2013-04-09 18:53:35.851+0000: 5800: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-09 18:53:35.851+0000: 5800: error :
> virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
> '/etc/pki/CA/cacert.pem': No such file or directory
> 2013-04-10 16:07:49.156+0000: 4018: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-10 16:07:49.156+0000: 4018: error :
> virStoragePoolDefParseXML:774 : XML error: missing pool source name element
> [root@panda ~]# cat /var/log/cloud/agent/agent.log
> 2013-04-11 00:07:33,936 INFO [utils.component.ComponentLocator]
> (main:null) Unable to find components.xml
> 2013-04-11 00:07:33,963 INFO [utils.component.ComponentLocator]
> (main:null) Skipping configuration using components.xml
> 2013-04-11 00:07:33,963 INFO [cloud.agent.AgentShell] (main:null)
> Implementation Version is 4.0.1.20130201075054
> 2013-04-11 00:07:33,964 INFO [cloud.agent.AgentShell] (main:null)
> agent.properties found at /etc/cloud/agent/agent.properties
> 2013-04-11 00:07:34,035 INFO [cloud.agent.AgentShell] (main:null)
> Defaulting to using properties file for storage
> 2013-04-11 00:07:34,037 INFO [cloud.agent.AgentShell] (main:null)
> Defaulting to the constant time backoff algorithm
> 2013-04-11 00:07:34,442 INFO [cloud.agent.Agent] (main:null) id is
> 2013-04-11 00:07:34,549 ERROR [cloud.resource.ServerResourceBase]
> (main:null) Nics are not configured!
> 2013-04-11 00:07:34,554 INFO [cloud.resource.ServerResourceBase]
> (main:null) Designating private to be nic eth0.100
> 2013-04-11 00:07:34,891 INFO
> [resource.virtualnetwork.VirtualRoutingResource] (main:null)
> VirtualRoutingResource _scriptDir to use: scripts/network/domr/kvm
> 2013-04-11 00:07:37,760 INFO [kvm.resource.LibvirtComputingResource]
> (main:null) No libvirt.vif.driver specififed. Defaults to BridgeVifDriver.
> 2013-04-11 00:07:38,244 INFO [cloud.agent.Agent] (main:null) Agent [id
> = new : type = LibvirtComputingResource : zone = default : pod = default
> : workers = 5 : host = localhost : port = 8250
> 2013-04-11 00:07:38,249 INFO [utils.nio.NioClient]
> (Agent-Selector:null) Connecting to localhost:8250
> 2013-04-11 00:07:38,316 ERROR [utils.nio.NioConnection]
> (Agent-Selector:null) Unable to connect to remote
> 2013-04-11 00:07:43,322 INFO [utils.nio.NioClient]
> (Agent-Selector:null) Connecting to localhost:8250
> 2013-04-11 00:07:43,323 ERROR [utils.nio.NioConnection]
> (Agent-Selector:null) Unable to connect to remote
> 2013-04-11 00:07:48,325 INFO [utils.nio.NioClient]
> (Agent-Selector:null) Connecting to localhost:8250
> 2013-04-11 00:07:48,947 INFO [utils.nio.NioClient]
> (Agent-Selector:null) SSL: Handshake done
> 2013-04-11 00:07:49,285 ERROR [kvm.storage.LibvirtStorageAdaptor]
> (Agent-Handler-1:null) org.libvirt.LibvirtException: XML error: missing
> pool source name element
> 2013-04-11 00:07:49,286 WARN [utils.nio.Task] (Agent-Handler-1:null)
> Caught the following exception but pushing on
> java.lang.NullPointerException
> at
> com.cloud.hypervisor.kvm.storage.LibvirtStorageAdaptor.createStoragePool(LibvirtStorageAdaptor.java:462)
> at
> com.cloud.hypervisor.kvm.storage.KVMStoragePoolManager.createStoragePool(KVMStoragePoolManager.java:57)
> at
> com.cloud.hypervisor.kvm.resource.LibvirtComputingResource.initialize(LibvirtComputingResource.java:3271)
> at com.cloud.agent.Agent.sendStartup(Agent.java:320)
> at com.cloud.agent.Agent$ServerHandler.doTask(Agent.java:850)
> at com.cloud.utils.nio.Task.run(Task.java:83)
> at
> java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
> at java.lang.Thread.run(Thread.java:722)
>
> cat /var/log/cloud/management/catalina.out
> Apr 11, 2013 12:07:48 AM org.apache.coyote.http11.Http11NioProtocol start
> INFO: Starting Coyote HTTP/1.1 on http-8080
> Apr 11, 2013 12:07:48 AM org.apache.jk.common.ChannelSocket init
> INFO: JK: ajp13 listening on /0.0.0.0:20400
> Apr 11, 2013 12:07:48 AM org.apache.jk.server.JkMain start
> INFO: Jk running ID=0 time=0/37 config=null
> Apr 11, 2013 12:07:48 AM org.apache.catalina.core.StandardService start
> INFO: Starting service Catalina7080
> Apr 11, 2013 12:07:48 AM org.apache.catalina.core.StandardEngine start
> INFO: Starting Servlet Engine: Apache Tomcat/6.0.24
> Apr 11, 2013 12:07:48 AM org.apache.catalina.startup.HostConfig
> deployDirectory
> INFO: Deploying web application directory awsapi
> INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:) We are
> good, no orphan management server msid in host table is found
> INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:) Found 1
> inactive management server node based on timestamp
> INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:)
> management server node msid: 88945717247250, name:
> panda.home.j2anywhere.com, service ip: 192.168.0.6, version:
> 4.0.1.20130201075054
> INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:) Trying
> to connect to 192.168.0.6
> Log4j configuration from : /usr/share/cloud/management/conf/log4j-cloud.xml
> Apr 11, 2013 12:07:50 AM org.apache.coyote.http11.Http11NioProtocol start
> INFO: Starting Coyote HTTP/1.1 on http-7080
> Apr 11, 2013 12:07:50 AM org.apache.catalina.startup.Catalina start
> INFO: Server startup in 14042 ms
> ERROR [cloud.alert.AlertManagerImpl] (Cluster-Notification-1:) Problem
> sending email alert
> java.lang.NullPointerException
> at
> com.cloud.alert.AlertManagerImpl$EmailAlert.sendAlert(AlertManagerImpl.java:776)
> at
> com.cloud.alert.AlertManagerImpl.sendAlert(AlertManagerImpl.java:268)
> at
> com.cloud.alert.ClusterAlertAdapter.onClusterNodeJoined(ClusterAlertAdapter.java:73)
> at
> com.cloud.alert.ClusterAlertAdapter.onClusterAlert(ClusterAlertAdapter.java:52)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at
> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
> at
> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
> at java.lang.reflect.Method.invoke(Method.java:601)
> at
> com.cloud.utils.events.SubscriptionMgr$SubscriberInfo.execute(SubscriptionMgr.java:147)
> at
> com.cloud.utils.events.SubscriptionMgr.notifySubscribers(SubscriptionMgr.java:77)
> at
> com.cloud.cluster.ClusterManagerImpl.notifyNodeJoined(ClusterManagerImpl.java:650)
> at
> com.cloud.cluster.ClusterManagerImpl$5.run(ClusterManagerImpl.java:871)
> at
> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
> at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
> at java.util.concurrent.FutureTask.run(FutureTask.java:166)
> at
> java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
> at java.lang.Thread.run(Thread.java:722)
> WARN [cloud.cluster.ClusterManagerImpl] (Cluster-Notification-1:)
> Notifying management server join event took 285 ms
> INFO [cloud.resource.ResourceManagerImpl] (catalina-exec-21:) Trying to
> add a new host at http://192.168.0.6 in data center 1
> INFO [utils.ssh.SSHCmdHelper] (catalina-exec-21:) Timeout while waiting
> for data from peer.
> INFO [utils.ssh.SSHCmdHelper] (catalina-exec-21:) Timeout while waiting
> for data from peer.
>
>