You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by ustcweizhou <gi...@git.apache.org> on 2015/12/04 08:26:26 UTC
[GitHub] cloudstack pull request: CLOUDSTACK-8845: set isRevertable of snap...
GitHub user ustcweizhou opened a pull request:
https://github.com/apache/cloudstack/pull/1168
CLOUDSTACK-8845: set isRevertable of snapshot to false if the volume is removed
Some users encounter an exception when listSnapshots.
We should set the isRevertable of snapshot to false if the original volume is removed, without checking if the snapshot is stored in primary store (the exception was thowned during the checking).
You can merge this pull request into a Git repository by running:
$ git pull https://github.com/ustcweizhou/cloudstack listSnapshots-Exception
Alternatively you can review and apply these changes as the patch at:
https://github.com/apache/cloudstack/pull/1168.patch
To close this pull request, make a commit to your master/trunk branch
with (at least) the following in the commit message:
This closes #1168
----
commit 52412286c657d384f86441095f5cbef510dd8763
Author: Wei Zhou <w....@tech.leaseweb.com>
Date: 2015-12-04T07:18:09Z
CLOUDSTACK-8845: set isRevertable of snapshot to false if the volume is removed
----
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-8845: set isRevertable of snap...
Posted by DaanHoogland <gi...@git.apache.org>.
Github user DaanHoogland commented on the pull request:
https://github.com/apache/cloudstack/pull/1168#issuecomment-161936820
@anshul1886 and @ustcweizhou can you guys go in a ring about this and 1166 please. Both address the same issue in a slightly different way.
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-8845: set isRevertable of snap...
Posted by DaanHoogland <gi...@git.apache.org>.
Github user DaanHoogland commented on the pull request:
https://github.com/apache/cloudstack/pull/1168#issuecomment-162336441
code lgtm and since @ustcweizhou and @anshul1886 agree on how to solve this and @remibergsma did the tests, i am merging this
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-8845: set isRevertable of snap...
Posted by remibergsma <gi...@git.apache.org>.
Github user remibergsma commented on the pull request:
https://github.com/apache/cloudstack/pull/1168#issuecomment-162044783
LGTM based on these tests:
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=true \
component/test_vpc_redundant.py \
component/test_routers_iptables_default_policy.py \
component/test_routers_network_ops.py \
component/test_vpc_router_nics.py \
smoke/test_loadbalance.py \
smoke/test_internal_lb.py \
smoke/test_ssvm.py \
smoke/test_network.py
```
Result:
```
Create a redundant VPC with two networks with two VMs in each network ... === TestName: test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL | Status : SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network and check default routes ... === TestName: test_02_redundant_VPC_default_routes | Status : SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network ... === TestName: test_03_create_redundant_VPC_1tier_2VMs_2IPs_2PF_ACL_reboot_routers | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName: test_02_routervm_iptables_policies | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policies on VPC router ... === TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_01_isolate_network_FW_PF_default_routes_egress_true | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_02_isolate_network_FW_PF_default_routes_egress_false | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test nics after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test default routes ... === TestName: test_02_VPC_default_routes | Status : SUCCESS ===
ok
Check the password file in the Router VM ... === TestName: test_isolate_network_password_server | Status : SUCCESS ===
ok
Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... === TestName: test_router_dhcphosts | Status : SUCCESS ===
ok
Test to create Load balancing rule with source NAT ... === TestName: test_01_create_lb_rule_src_nat | Status : SUCCESS ===
ok
Test to create Load balancing rule with non source NAT ... === TestName: test_02_create_lb_rule_non_nat | Status : SUCCESS ===
ok
Test for assign & removing load balancing rule ... === TestName: test_assign_and_removal_lb | Status : SUCCESS ===
ok
Test to verify access to loadbalancer haproxy admin stats page ... === TestName: test02_internallb_haproxy_stats_on_all_interfaces | Status : SUCCESS ===
ok
Test create, assign, remove of an Internal LB with roundrobin http traffic to 3 vm's ... === TestName: test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS ===
ok
Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : SUCCESS ===
ok
Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : SUCCESS ===
ok
Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
ok
Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
ok
Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS ===
ok
Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS ===
ok
Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : SUCCESS ===
ok
Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status : SUCCESS ===
ok
Test Remote Access VPN in VPC ... === TestName: test_vpc_remote_access_vpn | Status : SUCCESS ===
ok
Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status : SUCCESS ===
ok
Test for port forwarding on source NAT ... === TestName: test_01_port_fwd_on_src_nat | Status : SUCCESS ===
ok
Test for port forwarding on non source NAT ... === TestName: test_02_port_fwd_on_non_src_nat | Status : SUCCESS ===
ok
Test for reboot router ... === TestName: test_reboot_router | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 34 tests in 16768.484s
OK
```
And:
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=false \
smoke/test_routers.py \
smoke/test_network_acl.py \
smoke/test_privategw_acl.py \
smoke/test_reset_vm_on_reboot.py \
smoke/test_vm_life_cycle.py \
smoke/test_vpc_vpn.py \
smoke/test_service_offerings.py \
component/test_vpc_offerings.py \
component/test_vpc_routers.py
```
Result:
```
Test router internal advanced zone ... === TestName: test_02_router_internal_adv | Status : SUCCESS ===
ok
Test restart network ... === TestName: test_03_restart_network_cleanup | Status : SUCCESS ===
ok
Test router basic setup ... === TestName: test_05_router_basic | Status : SUCCESS ===
ok
Test router advanced setup ... === TestName: test_06_router_advanced | Status : SUCCESS ===
ok
Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS ===
ok
Test start router ... === TestName: test_08_start_router | Status : SUCCESS ===
ok
Test reboot router ... === TestName: test_09_reboot_router | Status : SUCCESS ===
ok
Test reset virtual machine on reboot ... === TestName: test_01_reset_vm_on_reboot | Status : SUCCESS ===
ok
Test advanced zone virtual router ... === TestName: test_advZoneVirtualRouter | Status : SUCCESS ===
ok
Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : SUCCESS ===
ok
Test Multiple Deploy Virtual Machine ... === TestName: test_deploy_vm_multiple | Status : SUCCESS ===
ok
Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : SUCCESS ===
ok
Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : SUCCESS ===
ok
Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : SUCCESS ===
ok
Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status : SUCCESS ===
ok
Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status : SUCCESS ===
ok
Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
ok
Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm | Status : SUCCESS ===
ok
Test to create service offering ... === TestName: test_01_create_service_offering | Status : SUCCESS ===
ok
Test to update existing service offering ... === TestName: test_02_edit_service_offering | Status : SUCCESS ===
ok
Test to delete service offering ... === TestName: test_03_delete_service_offering | Status : SUCCESS ===
ok
Test for delete account ... === TestName: test_delete_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for admin account ... === TestName: test_public_ip_admin_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for user account ... === TestName: test_public_ip_user_account | Status : SUCCESS ===
ok
Test for release public IP address ... === TestName: test_releaseIP | Status : SUCCESS ===
ok
Test create VPC offering ... === TestName: test_01_create_vpc_offering | Status : SUCCESS ===
ok
Test VPC offering without load balancing service ... === TestName: test_03_vpc_off_without_lb | Status : SUCCESS ===
ok
Test VPC offering without static NAT service ... === TestName: test_04_vpc_off_without_static_nat | Status : SUCCESS ===
ok
Test VPC offering without port forwarding service ... === TestName: test_05_vpc_off_without_pf | Status : SUCCESS ===
ok
Test VPC offering with invalid services ... === TestName: test_06_vpc_off_invalid_services | Status : SUCCESS ===
ok
Test update VPC offering ... === TestName: test_07_update_vpc_off | Status : SUCCESS ===
ok
Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : SUCCESS ===
ok
test_09_create_redundant_vpc_offering (integration.component.test_vpc_offerings.TestVPCOffering) ... === TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS ===
ok
Test start/stop of router after addition of one guest network ... === TestName: test_01_start_stop_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test reboot of router after addition of one guest network ... === TestName: test_02_reboot_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to change service offering of router after addition of one guest network ... === TestName: test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test destroy of router after addition of one guest network ... === TestName: test_05_destroy_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to stop and start router after creation of VPC ... === TestName: test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
ok
Test to reboot the router after creating a VPC ... === TestName: test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
ok
Tests to change service offering of the Router after ... === TestName: test_04_change_service_offerring_vpc | Status : SUCCESS ===
ok
Test to destroy the router after creating a VPC ... === TestName: test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 41 tests in 8219.997s
OK
```
Haven't tested the actual functionality, this just shows you didn't break anything else.
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-8845: set isRevertable of snap...
Posted by asfgit <gi...@git.apache.org>.
Github user asfgit closed the pull request at:
https://github.com/apache/cloudstack/pull/1168
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---