You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@flink.apache.org by Vishal Santoshi <vi...@gmail.com> on 2018/01/24 16:24:23 UTC
Does web ui hang for 1.4 for job submission ?
We have had 2 different installations and when e go submit a job, it gives
us the spinning wheel and the request never reaches the JM. CLI works
without issues. Is this us alone or some one else seen this.
Again 1.3.2 does not have the issue and we have the same nodes, n/w etc so
we sure nothing should have changed on our side.
Apologies if this is a stupid question with an obvious solution.
Regards
Vishal
Re: Does web ui hang for 1.4 for job submission ?
Posted by Vishal Santoshi <vi...@gmail.com>.
In our case we do not see that happening...when the web ui hangs and we
refresh the page it does not effect TMs etc. Is there something splecific
that you do that triggers this other issue ?
On Jan 25, 2018 7:15 AM, "Chesnay Schepler" <ch...@apache.org> wrote:
> That's a separate issue, and I would think deserves a JIRA as it sounds
> rather serious.
>
> On 25.01.2018 12:43, Lasse Nedergaard wrote:
>
> Great news 👍
>
> Does it also cover protection against loosing all your task managers?
>
> Med venlig hilsen / Best regards
> Lasse Nedergaard
>
>
> Den 25. jan. 2018 kl. 12.00 skrev Chesnay Schepler <ch...@apache.org>:
>
> In 1.4, jobs submitted through the WebUI that never actually execute a job
> will cause the UI to hang, with the only option
> of resolving that being to reload the page.
>
> This will be fixed for 1.4.1 and 1.5 .
>
> On 24.01.2018 19:19, Vishal Santoshi wrote:
>
> Exactly, the same context and issue. We too depend on args too and server
> side validations and that on error ui hangs.
>
> On Wed, Jan 24, 2018 at 1:13 PM, Lasse Nedergaard <
> lassenedergaard@gmail.com> wrote:
>
>> Hi.
>>
>> Our jobs take a number of command line options and validate them during
>> startup and throw an exception if something is wrong. When this exception
>> happens ui hang all prev. uploaded jars are removed most task manager are
>> lost and all running jobs terminated. We running Flink 1.4 on dc/os
>>
>> Med venlig hilsen / Best regards
>> Lasse Nedergaard
>>
>>
>> Den 24. jan. 2018 kl. 18.51 skrev Vishal Santoshi <
>> vishal.santoshi@gmail.com>:
>>
>> Yep, got it. It seems that the response when in an error state is
>> reported by JM is not being rendered.
>>
>> We can see the response in the UI debugger but not on the UI itself.
>>
>> On Wed, Jan 24, 2018 at 12:28 PM, Ufuk Celebi <uc...@apache.org> wrote:
>>
>>> It's not a stupid question at all! Try the following please:
>>> 1) Use something like Chrome's Developer Tools to check the responses
>>> you get from the web UI. If you see an error there, that should point
>>> you to what's going on.
>>> 2) Enable DEBUG logging for the JobManager and check the logs (if 1
>>> doesn't help)
>>>
>>> We just merged a change into master that does a better job of
>>> reporting any errors that occur during submission.
>>>
>>> – Ufuk
>>>
>>>
>>> On Wed, Jan 24, 2018 at 5:24 PM, Vishal Santoshi
>>> <vi...@gmail.com> wrote:
>>> > We have had 2 different installations and when e go submit a job, it
>>> gives
>>> > us the spinning wheel and the request never reaches the JM. CLI works
>>> > without issues. Is this us alone or some one else seen this.
>>> >
>>> > Again 1.3.2 does not have the issue and we have the same nodes, n/w
>>> etc so
>>> > we sure nothing should have changed on our side.
>>> >
>>> > Apologies if this is a stupid question with an obvious solution.
>>> >
>>> > Regards
>>> >
>>> > Vishal
>>>
>>
>>
>
>
>
Re: Does web ui hang for 1.4 for job submission ?
Posted by Chesnay Schepler <ch...@apache.org>.
That's a separate issue, and I would think deserves a JIRA as it sounds
rather serious.
On 25.01.2018 12:43, Lasse Nedergaard wrote:
> Great news 👍
>
> Does it also cover protection against loosing all your task managers?
>
> Med venlig hilsen / Best regards
> Lasse Nedergaard
>
>
> Den 25. jan. 2018 kl. 12.00 skrev Chesnay Schepler <chesnay@apache.org
> <ma...@apache.org>>:
>
>> In 1.4, jobs submitted through the WebUI that never actually execute
>> a job will cause the UI to hang, with the only option
>> of resolving that being to reload the page.
>>
>> This will be fixed for 1.4.1 and 1.5 .
>>
>> On 24.01.2018 19:19, Vishal Santoshi wrote:
>>> Exactly, the same context and issue. We too depend on args too and
>>> server side validations and that on error ui hangs.
>>>
>>> On Wed, Jan 24, 2018 at 1:13 PM, Lasse Nedergaard
>>> <lassenedergaard@gmail.com <ma...@gmail.com>> wrote:
>>>
>>> Hi.
>>>
>>> Our jobs take a number of command line options and validate them
>>> during startup and throw an exception if something is wrong.
>>> When this exception happens ui hang all prev. uploaded jars are
>>> removed most task manager are lost and all running jobs
>>> terminated. We running Flink 1.4 on dc/os
>>>
>>> Med venlig hilsen / Best regards
>>> Lasse Nedergaard
>>>
>>>
>>> Den 24. jan. 2018 kl. 18.51 skrev Vishal Santoshi
>>> <vishal.santoshi@gmail.com <ma...@gmail.com>>:
>>>
>>>> Yep, got it. It seems that the response when in an error
>>>> state is reported by JM is not being rendered.
>>>>
>>>> We can see the response in the UI debugger but not on the UI
>>>> itself.
>>>>
>>>> On Wed, Jan 24, 2018 at 12:28 PM, Ufuk Celebi <uce@apache.org
>>>> <ma...@apache.org>> wrote:
>>>>
>>>> It's not a stupid question at all! Try the following please:
>>>> 1) Use something like Chrome's Developer Tools to check the
>>>> responses
>>>> you get from the web UI. If you see an error there, that
>>>> should point
>>>> you to what's going on.
>>>> 2) Enable DEBUG logging for the JobManager and check the
>>>> logs (if 1
>>>> doesn't help)
>>>>
>>>> We just merged a change into master that does a better job of
>>>> reporting any errors that occur during submission.
>>>>
>>>> – Ufuk
>>>>
>>>>
>>>> On Wed, Jan 24, 2018 at 5:24 PM, Vishal Santoshi
>>>> <vishal.santoshi@gmail.com
>>>> <ma...@gmail.com>> wrote:
>>>> > We have had 2 different installations and when e go
>>>> submit a job, it gives
>>>> > us the spinning wheel and the request never reaches the
>>>> JM. CLI works
>>>> > without issues. Is this us alone or some one else seen this.
>>>> >
>>>> > Again 1.3.2 does not have the issue and we have the same
>>>> nodes, n/w etc so
>>>> > we sure nothing should have changed on our side.
>>>> >
>>>> > Apologies if this is a stupid question with an obvious
>>>> solution.
>>>> >
>>>> > Regards
>>>> >
>>>> > Vishal
>>>>
>>>>
>>>
>>
Re: Does web ui hang for 1.4 for job submission ?
Posted by Lasse Nedergaard <la...@gmail.com>.
Great news 👍
Does it also cover protection against loosing all your task managers?
Med venlig hilsen / Best regards
Lasse Nedergaard
> Den 25. jan. 2018 kl. 12.00 skrev Chesnay Schepler <ch...@apache.org>:
>
> In 1.4, jobs submitted through the WebUI that never actually execute a job will cause the UI to hang, with the only option
> of resolving that being to reload the page.
>
> This will be fixed for 1.4.1 and 1.5 .
>
>> On 24.01.2018 19:19, Vishal Santoshi wrote:
>> Exactly, the same context and issue. We too depend on args too and server side validations and that on error ui hangs.
>>
>>> On Wed, Jan 24, 2018 at 1:13 PM, Lasse Nedergaard <la...@gmail.com> wrote:
>>> Hi.
>>>
>>> Our jobs take a number of command line options and validate them during startup and throw an exception if something is wrong. When this exception happens ui hang all prev. uploaded jars are removed most task manager are lost and all running jobs terminated. We running Flink 1.4 on dc/os
>>>
>>> Med venlig hilsen / Best regards
>>> Lasse Nedergaard
>>>
>>>
>>> Den 24. jan. 2018 kl. 18.51 skrev Vishal Santoshi <vi...@gmail.com>:
>>>
>>>> Yep, got it. It seems that the response when in an error state is reported by JM is not being rendered.
>>>>
>>>> We can see the response in the UI debugger but not on the UI itself.
>>>>
>>>>> On Wed, Jan 24, 2018 at 12:28 PM, Ufuk Celebi <uc...@apache.org> wrote:
>>>>> It's not a stupid question at all! Try the following please:
>>>>> 1) Use something like Chrome's Developer Tools to check the responses
>>>>> you get from the web UI. If you see an error there, that should point
>>>>> you to what's going on.
>>>>> 2) Enable DEBUG logging for the JobManager and check the logs (if 1
>>>>> doesn't help)
>>>>>
>>>>> We just merged a change into master that does a better job of
>>>>> reporting any errors that occur during submission.
>>>>>
>>>>> – Ufuk
>>>>>
>>>>>
>>>>> On Wed, Jan 24, 2018 at 5:24 PM, Vishal Santoshi
>>>>> <vi...@gmail.com> wrote:
>>>>> > We have had 2 different installations and when e go submit a job, it gives
>>>>> > us the spinning wheel and the request never reaches the JM. CLI works
>>>>> > without issues. Is this us alone or some one else seen this.
>>>>> >
>>>>> > Again 1.3.2 does not have the issue and we have the same nodes, n/w etc so
>>>>> > we sure nothing should have changed on our side.
>>>>> >
>>>>> > Apologies if this is a stupid question with an obvious solution.
>>>>> >
>>>>> > Regards
>>>>> >
>>>>> > Vishal
>>>>
>>
>
Re: Does web ui hang for 1.4 for job submission ?
Posted by Chesnay Schepler <ch...@apache.org>.
In 1.4, jobs submitted through the WebUI that never actually execute a
job will cause the UI to hang, with the only option
of resolving that being to reload the page.
This will be fixed for 1.4.1 and 1.5 .
On 24.01.2018 19:19, Vishal Santoshi wrote:
> Exactly, the same context and issue. We too depend on args too and
> server side validations and that on error ui hangs.
>
> On Wed, Jan 24, 2018 at 1:13 PM, Lasse Nedergaard
> <lassenedergaard@gmail.com <ma...@gmail.com>> wrote:
>
> Hi.
>
> Our jobs take a number of command line options and validate them
> during startup and throw an exception if something is wrong. When
> this exception happens ui hang all prev. uploaded jars are removed
> most task manager are lost and all running jobs terminated. We
> running Flink 1.4 on dc/os
>
> Med venlig hilsen / Best regards
> Lasse Nedergaard
>
>
> Den 24. jan. 2018 kl. 18.51 skrev Vishal Santoshi
> <vishal.santoshi@gmail.com <ma...@gmail.com>>:
>
>> Yep, got it. It seems that the response when in an error state
>> is reported by JM is not being rendered.
>>
>> We can see the response in the UI debugger but not on the UI itself.
>>
>> On Wed, Jan 24, 2018 at 12:28 PM, Ufuk Celebi <uce@apache.org
>> <ma...@apache.org>> wrote:
>>
>> It's not a stupid question at all! Try the following please:
>> 1) Use something like Chrome's Developer Tools to check the
>> responses
>> you get from the web UI. If you see an error there, that
>> should point
>> you to what's going on.
>> 2) Enable DEBUG logging for the JobManager and check the logs
>> (if 1
>> doesn't help)
>>
>> We just merged a change into master that does a better job of
>> reporting any errors that occur during submission.
>>
>> – Ufuk
>>
>>
>> On Wed, Jan 24, 2018 at 5:24 PM, Vishal Santoshi
>> <vishal.santoshi@gmail.com
>> <ma...@gmail.com>> wrote:
>> > We have had 2 different installations and when e go submit
>> a job, it gives
>> > us the spinning wheel and the request never reaches the JM.
>> CLI works
>> > without issues. Is this us alone or some one else seen this.
>> >
>> > Again 1.3.2 does not have the issue and we have the same
>> nodes, n/w etc so
>> > we sure nothing should have changed on our side.
>> >
>> > Apologies if this is a stupid question with an obvious
>> solution.
>> >
>> > Regards
>> >
>> > Vishal
>>
>>
>
Re: Does web ui hang for 1.4 for job submission ?
Posted by Vishal Santoshi <vi...@gmail.com>.
Exactly, the same context and issue. We too depend on args too and server
side validations and that on error ui hangs.
On Wed, Jan 24, 2018 at 1:13 PM, Lasse Nedergaard <lassenedergaard@gmail.com
> wrote:
> Hi.
>
> Our jobs take a number of command line options and validate them during
> startup and throw an exception if something is wrong. When this exception
> happens ui hang all prev. uploaded jars are removed most task manager are
> lost and all running jobs terminated. We running Flink 1.4 on dc/os
>
> Med venlig hilsen / Best regards
> Lasse Nedergaard
>
>
> Den 24. jan. 2018 kl. 18.51 skrev Vishal Santoshi <
> vishal.santoshi@gmail.com>:
>
> Yep, got it. It seems that the response when in an error state is
> reported by JM is not being rendered.
>
> We can see the response in the UI debugger but not on the UI itself.
>
> On Wed, Jan 24, 2018 at 12:28 PM, Ufuk Celebi <uc...@apache.org> wrote:
>
>> It's not a stupid question at all! Try the following please:
>> 1) Use something like Chrome's Developer Tools to check the responses
>> you get from the web UI. If you see an error there, that should point
>> you to what's going on.
>> 2) Enable DEBUG logging for the JobManager and check the logs (if 1
>> doesn't help)
>>
>> We just merged a change into master that does a better job of
>> reporting any errors that occur during submission.
>>
>> – Ufuk
>>
>>
>> On Wed, Jan 24, 2018 at 5:24 PM, Vishal Santoshi
>> <vi...@gmail.com> wrote:
>> > We have had 2 different installations and when e go submit a job, it
>> gives
>> > us the spinning wheel and the request never reaches the JM. CLI works
>> > without issues. Is this us alone or some one else seen this.
>> >
>> > Again 1.3.2 does not have the issue and we have the same nodes, n/w etc
>> so
>> > we sure nothing should have changed on our side.
>> >
>> > Apologies if this is a stupid question with an obvious solution.
>> >
>> > Regards
>> >
>> > Vishal
>>
>
>
Re: Does web ui hang for 1.4 for job submission ?
Posted by Lasse Nedergaard <la...@gmail.com>.
Hi.
Our jobs take a number of command line options and validate them during startup and throw an exception if something is wrong. When this exception happens ui hang all prev. uploaded jars are removed most task manager are lost and all running jobs terminated. We running Flink 1.4 on dc/os
Med venlig hilsen / Best regards
Lasse Nedergaard
> Den 24. jan. 2018 kl. 18.51 skrev Vishal Santoshi <vi...@gmail.com>:
>
> Yep, got it. It seems that the response when in an error state is reported by JM is not being rendered.
>
> We can see the response in the UI debugger but not on the UI itself.
>
>> On Wed, Jan 24, 2018 at 12:28 PM, Ufuk Celebi <uc...@apache.org> wrote:
>> It's not a stupid question at all! Try the following please:
>> 1) Use something like Chrome's Developer Tools to check the responses
>> you get from the web UI. If you see an error there, that should point
>> you to what's going on.
>> 2) Enable DEBUG logging for the JobManager and check the logs (if 1
>> doesn't help)
>>
>> We just merged a change into master that does a better job of
>> reporting any errors that occur during submission.
>>
>> – Ufuk
>>
>>
>> On Wed, Jan 24, 2018 at 5:24 PM, Vishal Santoshi
>> <vi...@gmail.com> wrote:
>> > We have had 2 different installations and when e go submit a job, it gives
>> > us the spinning wheel and the request never reaches the JM. CLI works
>> > without issues. Is this us alone or some one else seen this.
>> >
>> > Again 1.3.2 does not have the issue and we have the same nodes, n/w etc so
>> > we sure nothing should have changed on our side.
>> >
>> > Apologies if this is a stupid question with an obvious solution.
>> >
>> > Regards
>> >
>> > Vishal
>
Re: Does web ui hang for 1.4 for job submission ?
Posted by Vishal Santoshi <vi...@gmail.com>.
The error is coming out as plain test with status 500.
On Wed, Jan 24, 2018 at 12:51 PM, Vishal Santoshi <vishal.santoshi@gmail.com
> wrote:
> Yep, got it. It seems that the response when in an error state is
> reported by JM is not being rendered.
>
> We can see the response in the UI debugger but not on the UI itself.
>
> On Wed, Jan 24, 2018 at 12:28 PM, Ufuk Celebi <uc...@apache.org> wrote:
>
>> It's not a stupid question at all! Try the following please:
>> 1) Use something like Chrome's Developer Tools to check the responses
>> you get from the web UI. If you see an error there, that should point
>> you to what's going on.
>> 2) Enable DEBUG logging for the JobManager and check the logs (if 1
>> doesn't help)
>>
>> We just merged a change into master that does a better job of
>> reporting any errors that occur during submission.
>>
>> – Ufuk
>>
>>
>> On Wed, Jan 24, 2018 at 5:24 PM, Vishal Santoshi
>> <vi...@gmail.com> wrote:
>> > We have had 2 different installations and when e go submit a job, it
>> gives
>> > us the spinning wheel and the request never reaches the JM. CLI works
>> > without issues. Is this us alone or some one else seen this.
>> >
>> > Again 1.3.2 does not have the issue and we have the same nodes, n/w etc
>> so
>> > we sure nothing should have changed on our side.
>> >
>> > Apologies if this is a stupid question with an obvious solution.
>> >
>> > Regards
>> >
>> > Vishal
>>
>
>
Re: Does web ui hang for 1.4 for job submission ?
Posted by Vishal Santoshi <vi...@gmail.com>.
Yep, got it. It seems that the response when in an error state is
reported by JM is not being rendered.
We can see the response in the UI debugger but not on the UI itself.
On Wed, Jan 24, 2018 at 12:28 PM, Ufuk Celebi <uc...@apache.org> wrote:
> It's not a stupid question at all! Try the following please:
> 1) Use something like Chrome's Developer Tools to check the responses
> you get from the web UI. If you see an error there, that should point
> you to what's going on.
> 2) Enable DEBUG logging for the JobManager and check the logs (if 1
> doesn't help)
>
> We just merged a change into master that does a better job of
> reporting any errors that occur during submission.
>
> – Ufuk
>
>
> On Wed, Jan 24, 2018 at 5:24 PM, Vishal Santoshi
> <vi...@gmail.com> wrote:
> > We have had 2 different installations and when e go submit a job, it
> gives
> > us the spinning wheel and the request never reaches the JM. CLI works
> > without issues. Is this us alone or some one else seen this.
> >
> > Again 1.3.2 does not have the issue and we have the same nodes, n/w etc
> so
> > we sure nothing should have changed on our side.
> >
> > Apologies if this is a stupid question with an obvious solution.
> >
> > Regards
> >
> > Vishal
>
Re: Does web ui hang for 1.4 for job submission ?
Posted by Ufuk Celebi <uc...@apache.org>.
It's not a stupid question at all! Try the following please:
1) Use something like Chrome's Developer Tools to check the responses
you get from the web UI. If you see an error there, that should point
you to what's going on.
2) Enable DEBUG logging for the JobManager and check the logs (if 1
doesn't help)
We just merged a change into master that does a better job of
reporting any errors that occur during submission.
– Ufuk
On Wed, Jan 24, 2018 at 5:24 PM, Vishal Santoshi
<vi...@gmail.com> wrote:
> We have had 2 different installations and when e go submit a job, it gives
> us the spinning wheel and the request never reaches the JM. CLI works
> without issues. Is this us alone or some one else seen this.
>
> Again 1.3.2 does not have the issue and we have the same nodes, n/w etc so
> we sure nothing should have changed on our side.
>
> Apologies if this is a stupid question with an obvious solution.
>
> Regards
>
> Vishal