You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by GitBox <gi...@apache.org> on 2020/10/18 18:00:08 UTC
[GitHub] [mynewt-core] danielkucera opened a new issue #2393: Low power with nRF52
danielkucera opened a new issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393
Hi,
I'm tuning the low power consumption with nRF52832. I was able to get to 170uA in System On mode with no modifications to mynewt-core.
But to get to 1.9uA I had to add following patch:
```
diff --git a/hw/mcu/nordic/nrf52xxx/src/hal_os_tick.c b/hw/mcu/nordic/nrf52xxx/src/hal_os_tick.c
index bca24c440..10bc94967 100644
--- a/hw/mcu/nordic/nrf52xxx/src/hal_os_tick.c
+++ b/hw/mcu/nordic/nrf52xxx/src/hal_os_tick.c
@@ -154,6 +154,7 @@ os_tick_idle(os_time_t ticks)
nrf52_os_tick_set_ocmp(ocmp);
}
+ NRF_CLOCK->TASKS_HFCLKSTOP = 1;
__DSB();
__WFI();
```
AFAIK, HFCLK is managed by softdevice but since mynewt is not using it, it has to manage HFCLK by itself.
Would you consider adding this to the codebase or is there something I am missing?
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] navan93 commented on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
navan93 commented on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-798868263
Hi,
I am facing a strange issue of periodic increase in power consumption. I have a custom board based on NRF52811 and to test the sleep current I have configured a basic app without any additional tasks, with the bare minimum main function.
Initially after power up the current is ~3uA , which is acceptable.It stays like this for ~2mins before the current increases to ~300uA which again stays for another 2 mins before returning back to a consumption of ~3uA.
Is there some periodic maintenance in the OS itself which is causing this?
Any help is appreciated.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] ncasaril commented on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
ncasaril commented on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-745764915
I may have been a bit too quick to tag this issue in my PR. Whilst it's relevant, I suspect that this issue has a hal_timer enabled in the bootloader which in turn enables the HFXO before the main application starts.
I.e. check what TIMER_* are set to one for the bootloader.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] danielkucera commented on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
danielkucera commented on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-712813760
In whole mynewt-core there is not a single call to `nrf52_clock_hfxo_request` or `nrf52_clock_hfxo_release`.
Am I missing something?
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] navan93 edited a comment on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
navan93 edited a comment on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-798868263
Hi,
I am facing a strange issue of periodic increase in power consumption. I have a custom board based on NRF52811 and to test the sleep current I have configured a basic app without any additional tasks, with the bare minimum main function.
Initially after power up the current is ~3uA , which is acceptable.It stays like this for ~2mins before the current increases to ~300uA which again stays for another 2 mins before returning back to a consumption of ~3uA.
Is there some periodic maintenance in the OS itself which is causing this?
Any help is appreciated.
UPDATE: This was a PCB issue and not a software one.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] manuhrao commented on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
manuhrao commented on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-747776687
> Hi,
>
> I'm tuning the low power consumption with nRF52832. I was able to get to 170uA in System On mode with no modifications to mynewt-core.
>
> But to get to 1.9uA I had to add following patch:
>
@danielkucera , I have a favor to ask. I have a project defined with no purpose other than to test low power in system on, and I am unable to drop below 480uA.( I already have the HCLK off, automatically, which frankly I can't explain given your findings).
Are you able to share your project (or at least the syscfg.yml and the pkg.yml, along with the functions that put you in the lowest power state?
Much appreciated.
manu@culvertengineering.com
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] andrzej-kaczmarek commented on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
andrzej-kaczmarek commented on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-712800192
there's `nrf52_clock_hfxo_request` function which is used to start HFXO and refcount its users, so it may be just that some code requested HFXO but did not release it. for sure you should not stop it as above.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] danielkucera commented on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
danielkucera commented on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-712887159
following seems to fix the issue with latest master
```
diff --git a/hw/mcu/nordic/nrf52xxx/src/hal_system.c b/hw/mcu/nordic/nrf52xxx/src/hal_system.c
index bc390883b..8157e092d 100644
--- a/hw/mcu/nordic/nrf52xxx/src/hal_system.c
+++ b/hw/mcu/nordic/nrf52xxx/src/hal_system.c
@@ -69,6 +69,7 @@ hal_debugger_connected(void)
void
hal_system_clock_start(void)
{
+ NRF_CLOCK->TASKS_HFCLKSTOP=1;
#if MYNEWT_VAL(MCU_LFCLK_SOURCE)
uint32_t regmsk;
uint32_t regval;
diff --git a/hw/mcu/nordic/nrf52xxx/src/hal_timer.c b/hw/mcu/nordic/nrf52xxx/src/hal_timer.c
index b3730f0e5..5ae77adcf 100644
--- a/hw/mcu/nordic/nrf52xxx/src/hal_timer.c
+++ b/hw/mcu/nordic/nrf52xxx/src/hal_timer.c
@@ -652,6 +652,7 @@ hal_timer_config(int timer_num, uint32_t freq_hz)
#if MYNEWT_VAL_CHOICE(MCU_HFCLK_SOURCE, HFXO)
/* Make sure HFXO is started */
+ /*
if ((NRF_CLOCK->HFCLKSTAT &
(CLOCK_HFCLKSTAT_SRC_Msk | CLOCK_HFCLKSTAT_STATE_Msk)) !=
(CLOCK_HFCLKSTAT_SRC_Msk | CLOCK_HFCLKSTAT_STATE_Msk)) {
@@ -663,6 +664,7 @@ hal_timer_config(int timer_num, uint32_t freq_hz)
}
}
}
+ */
#endif
hwtimer = bsptimer->tmr_reg;
```
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] danielkucera commented on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
danielkucera commented on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-712819024
Okay, I've put
```
NRF_CLOCK->TASKS_HFCLKSTOP = 1;
```
into my app `main()` and it has the same effect - power usage drops.
Is it possible that it's on by default or enabled during mcuboot?
Should it be handled in `SystemInit()` ?
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] danielkucera commented on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
danielkucera commented on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-750290260
This is my test app for sleep:
https://github.com/danielkucera/mynewt-blinky-sleep-nrf52
I was able to achieve ~2uA in sleep.
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [mynewt-core] andrzej-kaczmarek commented on issue #2393: Low power with nRF52
Posted by GitBox <gi...@apache.org>.
andrzej-kaczmarek commented on issue #2393:
URL: https://github.com/apache/mynewt-core/issues/2393#issuecomment-712840565
I recall two other places where HFXO can be started:
- on init, if LFCLK source is set to synth clock (this would have to be set explicitly)
- in hal_timer, when timer that uses HFCLK is configured
So in case mcuboot uses some timer, then it is possible that such timer started HFXO and it is not stopped. In such case I guess it would be reasonable to explicitly stop HFXO in `hal_system_clock_start` - so you can check if this helps and if so, patches are welcome :)
----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
For queries about this service, please contact Infrastructure at:
users@infra.apache.org